Related
I cannot stand the installation procedure needed for the screen protectors. Every single time: I use the "provided micro fiber" cloth to remove dirt and lint and the apply. EVERY TIME I am left with tiny lint,, micro specs of air dust etc. between the film and the screen, and a small little bubble here and there. It drives me crazy. Call me obsessive compulsive but it take me about 3 screen protectors until I finally get it right. Anyone aware of any screen protection technology that will help me avoid this outcome?
I don't, but I did read that if you apply it in the bathroom after running hot water and steaming it up real good that it will help that problem a lot. I plan to try that when I get my first screen protector this week.
Sent from my SAMSUNG-SGH-I897 using XDA App
Hard type screen protectors will solve your bubble issues. Martin Fields screen protectors is pretty much impossible to have bubbles stuck inside it.
However it won't solve your dust problem. If anything, it's much easier to see dirt and other imperfections stuck between the screen and a Martin Field protector.
Or you could try one of the crystal screen protectors from boxwave. I had your problem too with my first 2 screen protectors, and it seemed that I couldn't just get them on there without a problem. With this one from boxwave, I just wiped it off with the provided micro-fiber cloth and used the bubble-elimination card to remove any possible bubbles under the screen!
http://www.boxwave.com/
Get the ones from ATT. I have tried Bodyguardz, Zagg, Stealth Guards, and some generic BS from eBay. All of those were the type you apply with the solution (and have that dreaded orange peel look) and you have to wait for it to "cure" and it is extremely easy to get bubbles stuck in them.
The ones from ATT on the other hand, are completely smooth and truly invisible. They are a stiffer material and you do not need application solution. I am very happy with them and for 9.99 you get 3 of them. If you mess one up by getting some lint on it or whatever, you can just wash it with soapy water and spray it down with some water+baby soap and re apply it that way. Very easy to get the air bubbles out that are caused by using the solution. Again, they can be installed with no solution at all and if done carefully, it should look like nothing was ever installed on the phone
http://www.wireless.att.com/cell-ph...038&q_sku=sku4770252&q_manufacturer=&q_model=
I got them from a local store for 7$ since I got a discount. Those above ^^ from BoxWave seem extremely over priced. For 10$ you can't go wrong with the ones from ATT.
I am using clarivue not even a single dust, lint, inside. It's the quick and easy 3 layer type screen protectors.
Here's a tip ... go to the bathroom and turn on hot water on sink or whatever to create humidity that would trap the dust or w/e in the air ... and it makes this easier to apply.
I haven't had a screen protector on my Vibrant in almost 2 months now & even with constantly putting it in my pocket with my keys, dropping it once onto my driveway & even fumbling it into bouncing off a brick wall one time I have yet to scratch my screen. The rest of the phone is dented & scratched but the screen is still beautiful.
Siks said:
I haven't had a screen protector on my Vibrant in almost 2 months now & even with constantly putting it in my pocket with my keys, dropping it once onto my driveway & even fumbling it into bouncing off a brick wall one time I have yet to scratch my screen. The rest of the phone is dented & scratched but the screen is still beautiful.
Click to expand...
Click to collapse
+1
I had my iPod Touch for years, in and out of pockets with keys and pocket-knives and cell phones, dropped countless times, two little kids messing with it all the time, accidentally sliding it face-down across surfaces, and so on. Never used a screen protector, never got a single blemish or scratch. And that was basically plain old arsenic-free glass. The Captivate is made with Corning's high-tech Gorilla Glass.
Sure, either could still scratch or break. But it's like getting a car with an expensive paintjob, and then covering the whole thing in Scotch tape so it won't get scratched. You end up with something that looks god-awful 100% of the time, because you're afraid something might happen to it that would affect how it looks. Pretty much any time someone hands me their smartphone or DS, it is a scratched, smudgy, dusty mess because of some $40 screen cover they have on there. I always try to point out that it seems odd to make your screen look terrible on purpose just because you're afraid of you might make it look terrible on accident. I used one good one once, that you couldn't even tell was there, but the first time I took it on a flight it turned into smears of rainbows.
use a piece of clear packing tape to remove the dust. running the shower helps bring dust down but there will be some lint from the cloth. dont lean over it, a lot of "dust" is dry dead skin or dandruff so if you have dry skin or dry scalp dust will fall on it. also stop being so anal.
Siks said:
I haven't had a screen protector on my Vibrant in almost 2 months now & even with constantly putting it in my pocket with my keys, dropping it once onto my driveway & even fumbling it into bouncing off a brick wall one time I have yet to scratch my screen. The rest of the phone is dented & scratched but the screen is still beautiful.
Click to expand...
Click to collapse
+1
I don't need no stinkin' screen protector. I mean unless I know my phone is going to be dragged across macadam but then a screen protector won't help, will it.
Gorilla Glass... Screen Protector unnecessary... I have always used a screen protector too on previous phones but the screen on this phone is rugged.
I used to be the same way as you guys, "I don't need a screen protector because it's been through everything and still works perfectly!!" Yet, one day I found a scratch on my screen that I have no idea whatsoever where it came from. So, I got this Boxwave ClearTouch Crystal screen protector, and you literally cannot tell it is on there. It feels just like the glass (con for me actually, I prefer a paper kind of feel) and doesn't scratch easily at all. Plus, I installed it in a dusty room and there was no lint or anything else under the screen. It even comes with a thick card to remove bubbles once it has been applied. So, if you're even slighty, .000001% scared of getting lint trapped underneath the screen, go with Boxwave. I vouch for its clarity and ease of installation. Also, my screen is just as sensitive as before, as I've tried BARELY touching the screen and it still would pick up a touch.
And, in the rare event that you did get dust glued to the screen, it is completely washable and rewashable, so it is a little expensive, but well, well worth it.
Oh, and there is no adhesive whatsoever, not even water is needed. Just peel and go.
magnumrt562 said:
Gorilla Glass... Screen Protector unnecessary... I have always used a screen protector too on previous phones but the screen on this phone is rugged.
Click to expand...
Click to collapse
i listened to this
totally terrible advice. not that i care but i have about 20 microscratches and a couple decent sized ones....
it takes time to learn how to put screen protectors on... I have probably put 500 or so on all different types of phones you just wipe it clean tilt it so that you can make sure there are no dust particles... then you pull the backing off of the protector a few inches apply to the designated area and take a credit card and follow the rest of the protector down... works everytime
iamamp3pimp said:
i listened to this
totally terrible advice. not that i care but i have about 20 microscratches and a couple decent sized ones....
Click to expand...
Click to collapse
I second this . there is no such thing as 'unscratchable glass' some very expensive sunglasses use to have that warranty , guess what , they dont anymore ...
although I have to say the argument about HAVING YOUR PHONE LOOK UGLY JUST IN CASE SOME ACCIDENT CAN HAPPEN TO MAKE UGLY made me laugh , I d never have a phone without one my advice :
Just buy a few cheap ones on eBay and master the trick when your bored , after 3 times it should be installed perfectly , I also noticed if you have light scratches already on it , the screen protector hides them so thats a bonus
Ive tried SO many screen protectors. The only one I have been happy with so far (and VERY happy at that) is Realook. They are SUPER clear, thin, and very hard. You do not lose the glassy feel or the crisp vivid look on the screen. Ive put them on a few phones now, a few Vibrants and a Mytouch Slide 3g (my gf didnt even know i had put it on there till i told her). Its $10 for 2 protectors and I HIGHLY recommend them.
http://cgi.ebay.com.sg/REALOOK-AT-T-Samsung-Captivate-AFP-Screen-Protector-2PK-/250674134359
Siks said:
I haven't had a screen protector on my Vibrant in almost 2 months now & even with constantly putting it in my pocket with my keys, dropping it once onto my driveway & even fumbling it into bouncing off a brick wall one time I have yet to scratch my screen. The rest of the phone is dented & scratched but the screen is still beautiful.
Click to expand...
Click to collapse
I have a tiny little chip right in the middle of my screen on my Captivate about a cm underneath the AT&T logo. It has taken less abuse than yours, and it even has a screen protector on it. It looks like the kind of chip you would get if a piece of gravel hit your windshield a little too hard.
Your mileage may vary.
Hydrocharged said:
I used to be the same way as you guys, "I don't need a screen protector because it's been through everything and still works perfectly!!" Yet, one day I found a scratch on my screen that I have no idea whatsoever where it came from. So, I got this Boxwave ClearTouch Crystal screen protector, and you literally cannot tell it is on there. It feels just like the glass (con for me actually, I prefer a paper kind of feel) and doesn't scratch easily at all. Plus, I installed it in a dusty room and there was no lint or anything else under the screen. It even comes with a thick card to remove bubbles once it has been applied. So, if you're even slighty, .000001% scared of getting lint trapped underneath the screen, go with Boxwave. I vouch for its clarity and ease of installation. Also, my screen is just as sensitive as before, as I've tried BARELY touching the screen and it still would pick up a touch.
And, in the rare event that you did get dust glued to the screen, it is completely washable and rewashable, so it is a little expensive, but well, well worth it.
Oh, and there is no adhesive whatsoever, not even water is needed. Just peel and go.
Click to expand...
Click to collapse
Thanks for the info on the Boxwave screen protector, I've been wandering if it's as good as it looks.
In the malls near me now, there are little carts (you know those areas of the mall, where the cart/carny people are) that have people with small steady hands...
Invisible Shield it is called. They give you a lifetime warranty on the cover. They put it on. They will even cover your entire phone if you want (the back of the Captivate I am thinking of getting covered to avoid scratches on the metal back), and if you get a replacement phone for some reason, you only pay a portion of the price (material only) and they put it on again.
They use some sort of silicon liquid (snake oil... was probably just water) to aid in putting it on, and mine is perfect. Had a couple bubbles with the liquid still in it, but true to their word, it evaporated (through the protector) and it was perfect the next morning.
I jumped at this opportunity after totally FAILING at putting on a protector on my Tilt 2 (two packs of 3). On that phone, I took an exacto knife to cut off the excess I was so bad at it. I gladly paid $20 to have someone else do it and give me a warranty on it.
Invisible Shield. Check out your local mall.
Jeepsdaddy said:
I cannot stand the installation procedure needed for the screen protectors. Every single time: I use the "provided micro fiber" cloth to remove dirt and lint and the apply. EVERY TIME I am left with tiny lint,, micro specs of air dust etc. between the film and the screen, and a small little bubble here and there. It drives me crazy. Call me obsessive compulsive but it take me about 3 screen protectors until I finally get it right. Anyone aware of any screen protection technology that will help me avoid this outcome?
Click to expand...
Click to collapse
I think the gorilla glass is pretty resilient. Check out this youtube vid.
http://www.youtube.com/watch?v=6xASJobjD68
So what do people recommend as the best screen protectors to choose from for the MT4G?
I know everyone has their own opinions on them, but I'm hoping people can post their pros/cons and we can help us all narrow down the choice to a few.
Thanks!
the phantom skinz screen protector! pros: clear, nice feel, covers the whole front. cons: none if installed correctly.
I like the Reallook one. Clear, durable and feels like the glass.
I had the realook and phantom skinz. I settled on phantom skinz. I have the full body matte, plus clear phantom skinz. (Don't install the matte screen protector from PS).
Realook is very good with clear BUT the only thing that sucks is that you get ALOT of oils/fingerprints, etc on it. Easy install and easy clean with soap/water.
Phantom skinz gets oil on the screen too, but not as much. Screen surface is alittle "gummy". (Orange peel is very little to non existant). Watch out as the adhesive backing will attract lint (during installation) and you WILL not be able to get that off. PS also has lifetime warranty = unlimited screen protector replacements. (got the whole kit for $12 during 50% off cyber monday).
Don't bother getting invisible shield, they suck and give you orange peel, and it's thick.
@Jaylito,
Did you notice any kind of cloudiness after you cleaned your screen with alchol/towel? (assuming you've cleaned your screen with alcohol/water) For some reason, mine clouded up on the top.
yeah I have. I guess it's normal tho. goes away if u keep rubbing the screen back & fourth with ur thumb. guess since the material... if it gets wet, it'll cloud a bit cause the moisture seeps thru the inside but it'll dry out bro.
guess I have to do more rubbing then cause it's still cloudy...
oh well....
I tried PhantomSkinz and that was a pain to put on (w/ water and soap), Realook was easy and it didn't peel at the edges.
Zagg Invisishield. Lifetime Warranty.
realook, hands down.
pros: crystal clear, feels like the glass itself, easy to clean, easy to apply, easy to reapply.
cons: a little expensive ($10 for 2, but its totally worth it)
MT4G_Slave said:
I tried PhantomSkinz and that was a pain to put on (w/ water and soap), Realook was easy and it didn't peel at the edges.
Click to expand...
Click to collapse
Weird... for me, PS was MUCH EASIER than realook.
PS allows movement up/down/left/right with ease, and then you just squeeze out water.
For realook, it sucked to align the edges cause you can't move the film once you've "stickered" it on. Then you have to peel it back off and realign, causing lint (in my case) to adhere, and then I have to clean it again.
For me the realook was the best by far. I tried a couple of the wet app kind like invisishield and clear freak on the 4 mt4gs that I had and the realook was the best. I agree its a pain to put on, especially if you have animals because of dust and hair, but if you apply it in the bathroom after letting it steam up from the shower, I've found I can get it on without too much dust or hair falling on the screen. Also, get some extra scotch tape and place it on the front of the realook screen to keep your fingers off the adhesive side while applying it. Another nice thing is that each protector comes with two dots to apply to the camera lens in the back.
The only bad thing is that I think the realook attracts fingerprint grease worse than the wet app kind.
I have a zagg on my nexus s mostly because its all that's out right now and will put a realook on as soon as they are available.
Sent from my Nexus S using XDA App
The Boxwave screen protectores look pretty good too, though I've never tried one myself.
Ghost Armor. Just added it today on my 4G n its cut to fit perfectly, including the sensors n camera. FEELS like the real glass n doesn't take away from the display like the ones Tmo sales. Avoid those *****es like the plague.
I used Zagg for my Nexus S.
I get generic ones from a guy named lcd-protectors on ebay, 5 for $3.50. They're the stiff kind with two protective layers that you peel off, one before you apply and one after. I'm too cheap to pay more.
i just ordered a full body cover kit from stealthguards.com
choosing the clear type and none of the colored ones, it was $2.85 (full body protection, just pay shipping)
$2.85 sure beats dishing out $25 for zagg which is the same crap.
What do you need a screen protector for? I haven't used a screen protector since I bought the G1 at launch, and I've never had a screen scratch. Keys in my pockets, etc. Never been a problem. These screens are incredibly scratch resistant.
I love these screen protectors that I bought on Amazon. Perfect on the first try with no bubbles! Check it out here: http://www.amazon.com/gp/aw/d/B004E49TEG/ref=mp_s_a_1?qid=1294786757&sr=8-1:
BoxWare screen protector is well IDK how to rate it as it is just regular. What I did not like about it was it does "NOT" fully cover the screen as you have little gap very small which bugs me as I am neat. The feeling right now is artificial as I can tell it is there maybe cuz its still new as I applied it just 2hours ago. So lets wait and see how it turns out in long run.
I grabbed a Reallook screen protector off of amazon:
Pros: The feel and clarity are great
Cons: The cut. It has a cutout for the FFC and leaves a fair bit of space on all sides (as a result it's easy to get on) but it's really short on all sides in my opinion.
Part Four said:
What do you need a screen protector for? I haven't used a screen protector since I bought the G1 at launch, and I've never had a screen scratch. Keys in my pockets, etc. Never been a problem. These screens are incredibly scratch resistant.
Click to expand...
Click to collapse
Tell that to the scratch in my screen that I got the first day of having the phone... yeah, needless to say, I have a screen protector now and its helped a lot.
Sent from my HTC Glacier using XDA App
I tried to use them, I really did. The first one was a zagg and it wasn't a very good experience. The screen was rubbery and got scratched up within 2 weeks. So I removed it and just left my seidio case on for a few months. No scratches at all. Now I just got an otterbox impact case and came w/ a nicer screen protector. I put it on, but the lint underneath the screen was driving me crazy. I tried cleaning it off and made it even worst! Is anyone else just rockin it with just a case? I'm done w/ screen protectors.
I used my phone for months without a screen protector until the OB Defender(waste) came out.
I do agree with you that the lint and dust is utterly frustrating. you almost need a clean-room with a surgeon to get the damn thing on right. I can't remember who suggested it, but they said if you take your phone into the bathroom after a good, hot shower, the moisture in the air will keep dust from floating around and you'll get a real clean protector.
i will tell you this, like i said, i rocked my phone for months without any protection. then one day i slid it into the same pocket as my car keys and received a nice long scratch along the length of the phone.
I use the otterbox one and I love it. You really can't tell that there is even a screen protector on the phone. You just gotta be very careful when you put it on. I have gotten really good at it, mine is perfect- not a bubble, spec of dust, scratch, etc...
Screen protectors can be a pain in the ass, but with just a LITTLE bit of time, they can be awesome. First off, i use and swear by steinheil screen protectors. They feel exactly like the glass on the phone and not one person including myself has been able to tell the difference between an evo with it on and no screen protector. Second off, its the method of application that makes or breaks screen protectors. The single best way to apply one is in the bathroom. Turn on the shower and let the bathroom get foggy. This drops all the dusk in the air so you have a nice clean environment to work in. also use a good/new lint free cloth to clean while in the bathroom. use a little patience to get it lined up and start on the bottom and slowly move up using the included tool or a credit card. smooth out any remaining tiny bubbles and your in heaven my friend.
Wish I posted here first before applying the screen protector. I'll just have to baby it for now.
If you are going to use one of the ones made with the military grade polymer, bodyguardz is one of the better ones. It doesn't have the orange peel feel to it and they have a dry apply version.
I use steinheil too. The shower method is a little excessive tho. Just get a couple pieces of tape and dab around the whole screen to remove as much lint as you can, apply the protector and if there is still lint under use a strip of tape to life the protector and another piece to remove the lint.
spankmaster said:
Screen protectors can be a pain in the ass, but with just a LITTLE bit of time, they can be awesome. First off, i use and swear by steinheil screen protectors. They feel exactly like the glass on the phone and not one person including myself has been able to tell the difference between an evo with it on and no screen protector. Second off, its the method of application that makes or breaks screen protectors. The single best way to apply one is in the bathroom. Turn on the shower and let the bathroom get foggy. This drops all the dusk in the air so you have a nice clean environment to work in. also use a good/new lint free cloth to clean while in the bathroom. use a little patience to get it lined up and start on the bottom and slowly move up using the included tool or a credit card. smooth out any remaining tiny bubbles and your in heaven my friend.
Click to expand...
Click to collapse
I started using them and love them. IMO one if not the best out.
You just have to take your time. You cant tell mine is on.. I have used the anti fingerprint anf liked it a lot, but im using clear now and love it.... I wont go to the wet apply again.
Sent from my PC36100 using Tapatalk
I hate the glass. I like the plasticy rubbery feel of zagg. My hand can slide and there's no smudges or prints on. Amaxing
A drop of Chuck Norris's semen was placed on the IPhone. We now have the Htc Evo.
Just FYI, I found a screen protector that I swear buy. It feels like glass, like the original screen. I dont know how scratch resistant it is but after a few months I'm still scratch free. Also I put one on my wifes phone. They come in a three pack off Amazon for $7 and some change shipped. It's worth giving a shot. Here's the link- http://www.amazon.com/gp/product/B003T1WI02/ref=oss_product
mob87 said:
I use steinheil too. The shower method is a little excessive tho. Just get a couple pieces of tape and dab around the whole screen to remove as much lint as you can, apply the protector and if there is still lint under use a strip of tape to life the protector and another piece to remove the lint.
Click to expand...
Click to collapse
That's pretty innovative! I'll remember the tape trick next time. Thanks
I like Zagg InvisibleShield on my EVO. I had to order a replacement since I messed mine up with attempting to put on the front of a DecalGirl skin (pain in the butt).
I know I would have a hard time doing it myself so I had Best Buy install the last one and probably do my replacement. Yeah, they charge $8 but both times on my EVO and on my father's new android upgrade were perfect. No air bubbles, no trapped dust, dirt, and grim under the screen protector.
Check my Signature for a great option for screen protectors. They used to only have one type, now you can get a whole lot of options. I love them! I used the shower method too, and it worked great for me. Still on my first one - 4 months and counting.
jedwardmiller said:
Check my Signature for a great option for screen protectors. They used to only have one type, now you can get a whole lot of options. I love them! I used the shower method too, and it worked great for me. Still on my first one - 4 months and counting.
Click to expand...
Click to collapse
Are there scratches on ur screen protector? That's the other thing that drives me crazy.
I personally have to have a screen protector mainly due to my job . I work in the service department of a heavy equippment dealership . Besides being around dust and dirt and parts being ground down there is no telling what my fingers will pick up . I went with no protector at first and thats when I got my first two scratches . Had the invisible shield installed and scratches got covered up . Point of the story is , depending on your field of work and what you are exposing the phone to pretty much determines how well your screen is gonna remain scratch free . One thing that does irritate me to some extent . I had a Blackberry Storm that remained scratch free and never had a screen protector on it .
spankmaster said:
Screen protectors can be a pain in the ass, but with just a LITTLE bit of time, they can be awesome. First off, i use and swear by steinheil screen protectors. They feel exactly like the glass on the phone and not one person including myself has been able to tell the difference between an evo with it on and no screen protector. Second off, its the method of application that makes or breaks screen protectors. The single best way to apply one is in the bathroom. Turn on the shower and let the bathroom get foggy. This drops all the dusk in the air so you have a nice clean environment to work in. also use a good/new lint free cloth to clean while in the bathroom. use a little patience to get it lined up and start on the bottom and slowly move up using the included tool or a credit card. smooth out any remaining tiny bubbles and your in heaven my friend.
Click to expand...
Click to collapse
Going to give my vote to the Steinheil too. First off, I started out with a Zagg but could not stand the rubbery feel. In addition, I also use my EVO as a music player when I work out (I have an armband case that has a plastic cover on it) and every time I pulled the EVO out of the case after the workout, it would pull the Zagg cover off. PAIN IN THE *SS! I got so tired of it happening, the last time I just crumpled up the Zagg and tossed it in the trash. At that point, I was ready to go with a NAKED screen but had to remind myself that I was on my second EVO. The screen on my first got scratched 3 days after I brought it home (Don't even know how... with a 20-month old running around at home, could have been anything).
Now, going back to the Steinheil - I read reviews of it on Amazon and everyone raved. It was somewhat affordable so I thought, why not. After applying it, I have to say it's pretty awesome. Does it feel like glass? Not in my opinion - it feels "silky" but not SMOOTH like glass (does that make sense?) More importantly, it doesn't feel like rubber like the Zagg. And a fringe benefit, it does a great job of keeping off the fingerprints! And how about working out? I've used put in the armband case now 4X and it hasn't come off once. With the Zagg, I've had to reapply it 4 times!
So, my vote is for the Steinheil too... (BTW, they give you two in a case so you can try and find someone to split the costs with you if cost is an issue).
Boxwave screen protectors are the way to go. The crystal ones are awesome
Sent from my PC36100 using XDA App
I buy the cheap ones from China on ebay and they seem to work fine. I usually just buy them in bulk for like $10 and stash them. I replace them every couple of months once they get scratched. I swear by the shower method in the bathroom, always have a clean application.
I initially had a zagg screen protector but it was GARBAGE. I ripped it off after 2 days of having it. I ended up getting a privacy screen protector off eBay for $3.00 and have had it since. I do miss the crisp clarity of the Evo screen but it has proved useful and has worked much better than that zagg crap.
I got a Zagg as soon as I got my Evo. I had used them on other devices (G1, my brief stint with an iphone, my Moment). Some people don't like the orange peel effect, and say it feels tacky, but it doesn't bother me (I don't even notice the orange peel effect). I have had it since August of last year, since the Evo was so hard to come by for the longest time lol. I have no scratches, and no bubbles. No peeling of the sides, except one when I put my Seidio case on initially, but it smoothed back out. I had Best Buy install it for me this go around, and I couldn't be happier. I have had it like I said, since August, with heavy use, and it stays in my pocket. It still looks as good as the day I got it
Anyone is using Exim screen protector on I9100? Is it perfect fit? Is it a fingerprint magnet? Can anyone share some photo after having it on?
No one using Exim screen protector???
I an using the exim screen protectors. Got them off ebay, shipped from HK. It took 2+ weeks to get them.
I would consider them a perfect fit. They are a tad undersized, but I prefer that; it makes for an easier install.
Exim quality, very scratch resistant, but average when it comes to finger prints. They wipe off easily.
I will take a picture later on and post it.
Sent from my GT-I9100 using XDA Premium App
Pinkthesink said:
I an using the exim screen protectors. Got them off ebay, shipped from HK. It took 2+ weeks to get them.
I would consider them a perfect fit. They are a tad undersized, but I prefer that; it makes for an easier install.
Exim quality, very scratch resistant, but average when it comes to finger prints. They wipe off easily.
I will take a picture later on and post it.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Hi,
Thanks for your reply. How do you rate the installation process. Is it tough to install? How about the process of getting the bubble out? Is there any bubble after the installation? It would be great if you could post so picture. Well I feel that as long as fingerprint and oil stain is easily wipe of, this is consider good.
I found installation to be easy, as it's undersized a tad. If you have ever put screen protectors on, this one is no different. peel off a little of the top while folding down the protective layer and line up the top portion. once you have the top lined up and stuck on pull the rest of the films cover off and let it lay down.
If you didn't get the alignment right, get some clear magic tape, apply a little section to the bottom of the screen protector, lift up while holding the top of the protector in place with your thumb and pivot in place.
If you get any dust in between the protector and screen, apply some tape near the area, lift up and with your other hand stick a piece of fresh tape under the screen protector to grab the dust.
On another note, if you have ever applied a invisible skin like zagg, bodyguardz, or skinomi: you can use the same technique of spraying the protector aligning in place and pushing the fluid out with a squeegee.
I'll look for a good video to show what I'm talking about and post it below.
Sent from my Inspire 4G using XDA Premium App
Hi,
I know how the Zagg shield work. Thanks for the pictures. The screen protector look pretty decent and well fitted. May I know the type of Exim screen protector you have. Does it look as if there is no protector on screen? Thanks.
You can't tell it is on at all, crystal clear.
Sent from my Inspire 4G using XDA Premium App
I am using the Exim protector and agree it is pretty good. It is clear but I wouldn't say it's invisible as you can tell from the photos. I am waiting for the Martin Fields ones to be available.
Sent from my GT-I9100 using XDA App
Pinkthesink & PeteRyde , may I know which Exim are you using. Screen Protector Ultra Clear (SPUC)), Screen Protector Ultro Protection (SPUP) or Screen Protector Original Clear (SPOC))
I just checked, it is SPOC. I also received the steinheil ultra oleophobic protector in the mail yesterday from exportprive.com. It is very nice.
Sent from my GT-I9100 using XDA Premium App
Pinkthesink said:
I just checked, it is SPOC. I also received the steinheil ultra oleophobic protector in the mail yesterday from exportprive.com. It is very nice.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Hmm. That explain why it not that clear. SPUC would be a better choice.
hostet said:
Hmm. That explain why it not that clear. SPUC would be a better choice.
Click to expand...
Click to collapse
I have just ordered a pack of Exim screen protectors SPUC for my SGS2 directly from Exim online store.
It's gonna be shipped to me in 7-21 business days apparently.
jeanclaudevandamme said:
I have just ordered a pack of Exim screen protectors SPUC for my SGS2 directly from Exim online store.
It's gonna be shipped to me in 7-21 business days apparently.
Click to expand...
Click to collapse
Hi,
Do keep us updated of the quality and cutting. Thanks.
hostet said:
Pinkthesink & PeteRyde , may I know which Exim are you using. Screen Protector Ultra Clear (SPUC)), Screen Protector Ultro Protection (SPUP) or Screen Protector Original Clear (SPOC))
Click to expand...
Click to collapse
I'm using SPUC.
PeteRyde said:
I'm using SPUC.
Click to expand...
Click to collapse
How is the quality?
It is pretty good and very clear. Fingerprints are easy to wipe off which is good as it does accumulate them easily. The only thing I don't like about it is the cut. It is as per the picture where the home key is cut to the button and the speaker/camera cut to the top.
Sent from my GT-I9100 using XDA App
Been using the EXiM SPUC protectors on all of my phones since my TouchPro and have found them to be very clear but they are prone to fingerprints. I'd personally prefer fingerprints rather than permanent scratches.
On this phone they fit fairly well. The cut outs are well placed and don't obstruct any of the sensors at the top, but they are a little small around the edges (good if you use one of those TPU style cases because the case will be less likely to push on the edges of the protector).
Not much else I can comment on. They fit, they are clear and they are cheap while remaining high quality.
Hi PeteRyde & zehro,
Thanks for the review on the screen protector. I do agree the cutting is not as great as the rest. But most importantly, it is hard enough to resist scratch and is clear. Further to that, the pricing is pretty competitive.
hostet said:
Hi,
Do keep us updated of the quality and cutting. Thanks.
Click to expand...
Click to collapse
Experiment over. Costly, and I wish I never indulged in it.
Disclaimer: The Exim SPUC would likely be pretty good if the installation went more perfectly than Mary's inception of Jesus H Christ. It felt very smooth, did not scratch or oil at the slightest touch and was extremely clear picture quality wise.
One thing that's wrong with it is that some air bubbles dont' come out, they don't even move, they stay there and become a splodge.
What you really need is about 10 of these in a pack, because if they don't install more perfectly than the inception of Jesus H Christ on your first try, you need to bin them and move on.
Basically my 1st try ended up with lots of air bubbles and some dust/lint underneath beacuse i initially got the positioning wrong, so i lifted it up to realign it, getting more dust in the process.
So I move onto my 2nd try with the second protector in the pack. This time, I get alignment correctly first time. Unfortunately there were still air bubbles and there was a speck of dust where the screen was. The airbubbles wouldn't come out and ended up in sploges, trying to remove that speck of dust ended in more dust on the screen.
So now both protectors were boned. Then I decided to test Exim on it's word that it's protectors are washable, so I blast the silicon side under my tap to get rid of all dust. It did get rid of all dust/lint.
So I try reapplying it wet with just tap water, well it does apply, but the water won't come out properly and leaves skidmarks underneath, even with a squidgee (I have a spare Zagg Invisible shield one).
No good, so I wash it under tap again, then I first of all dry and clean my phone screen with microfibre cloth, then blast it with an air compressor to blast out and dry any escaped water in the bit where the screen joins the side, because I didn't want moisture into phone electronics.
This time I try an "proper" wet solution, I actually have a bottle of that Zagg Invisible shield spray, so I use that and try to reapply the Exim SPUC. It works better than water, but I was becoming increasingly frazzled and another bit of dust got underneath the screen, so I decided to blast screen with air compressor, big mistake, solution streak everywhere. So I take off the Exim protector to wipe excess liquid
I then found the Invisible Shield spray is utterly crap and the whole Zagg thing is just a rip off because the spray solution made a film on my screen, like it was obviously. The I madly scrub with microfibre cloth to get rid of it, thank **** it went.
In a moment of despair, I touch my SGS2 screen with my bare fingers, it was wrong, but felt so right. Like grabbing the fine ass of a lapdancer, something that you're suppposed to look, but not touch.
Then having totally wrecked my new Exim Screen Protectors which costed me $11 or £8. I go back to the 10 pack £1.99 protectors I got of eBay, they're cheap and slutty like the whore of Babylon, but at least they're readily disposable.
I tried and fail to apply 3 more cheap screen pretectors because of dust/link/air bubbles, bin them all and on 4th go, succeed. Experiment over.
jeanclaudevandamme said:
Experiment over. Costly, and I wish I never indulged in it.
Disclaimer: The Exim SPUC would likely be pretty good if the installation went more perfectly than Mary's inception of Jesus H Christ. It felt very smooth, did not scratch or oil at the slightest touch and was extremely clear picture quality wise.
One thing that's wrong with it is that some air bubbles dont' come out, they don't even move, they stay there and become a splodge.
What you really need is about 10 of these in a pack, because if they don't install more perfectly than the inception of Jesus H Christ on your first try, you need to bin them and move on.
Basically my 1st try ended up with lots of air bubbles and some dust/lint underneath beacuse i initially got the positioning wrong, so i lifted it up to realign it, getting more dust in the process.
So I move onto my 2nd try with the second protector in the pack. This time, I get alignment correctly first time. Unfortunately there were still air bubbles and there was a speck of dust where the screen was. The airbubbles wouldn't come out and ended up in sploges, trying to remove that speck of dust ended in more dust on the screen.
So now both protectors were boned. Then I decided to test Exim on it's word that it's protectors are washable, so I blast the silicon side under my tap to get rid of all dust. It did get rid of all dust/lint.
So I try reapplying it wet with just tap water, well it does apply, but the water won't come out properly and leaves skidmarks underneath, even with a squidgee (I have a spare Zagg Invisible shield one).
No good, so I wash it under tap again, then I first of all dry and clean my phone screen with microfibre cloth, then blast it with an air compressor to blast out and dry any escaped water in the bit where the screen joins the side, because I didn't want moisture into phone electronics.
This time I try an "proper" wet solution, I actually have a bottle of that Zagg Invisible shield spray, so I use that and try to reapply the Exim SPUC. It works better than water, but I was becoming increasingly frazzled and another bit of dust got underneath the screen, so I decided to blast screen with air compressor, big mistake, solution streak everywhere. So I take off the Exim protector to wipe excess liquid
I then found the Invisible Shield spray is utterly crap and the whole Zagg thing is just a rip off because the spray solution made a film on my screen, like it was obviously. The I madly scrub with microfibre cloth to get rid of it, thank **** it went.
In a moment of despair, I touch my SGS2 screen with my bare fingers, it was wrong, but felt so right. Like grabbing the fine ass of a lapdancer, something that you're suppposed to look, but not touch.
Then having totally wrecked my new Exim Screen Protectors which costed me $11 or £8. I go back to the 10 pack £1.99 protectors I got of eBay, they're cheap and slutty like the whore of Babylon, but at least they're readily disposable.
I tried and fail to apply 3 more cheap screen pretectors because of dust/link/air bubbles, bin them all and on 4th go, succeed. Experiment over.
Click to expand...
Click to collapse
What an experience you have. I guess it is due to the area you are in when applying the screen protector. It seems to me dust is all around you which is causing all this agony. You can try the suggestion as listed here. Look at post 1, 2, this and this video for the soap method. You may want to contact Exim and check if you can get a replacement. Anyway how many Exim protector you get in the order?
I just thought I should share a valuable lesson: DON'T BUY CHEAP SCREEN PROTECTORS!
I have been fine in the past with cheap screen protectors from eBay. They got the job done, and they were only a dollar or two. And you got six of them.
Anticipating the arrival of my N5, I bought a Spigen Neo-Hybrid case (Which is excellent), and some cheap screen protectors for $2. (12 to be exact)
http://www.ebay.com/itm/231089059032?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I bought a bunch because that gives ample headroom if you mess up a few times.
I try to install the first one, and it ends up with bubbles near the cutouts for the speaker and camera. Okay, I'll just try another one.
I've gone through six of them, and they all have the same bubble problem near the cutouts.
I ended up buying higher-end screen protectors: http://www.amazon.com/gp/product/B00EV97UD6/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I'll be sure to report on those when they arrive.
But the lesson is to be cautious with cheap screen protectors.
The xtremeguard screen protectors are really good, and they can be found for under $2.
mprasolov said:
I just thought I should share a valuable lesson: DON'T BUY CHEAP SCREEN PROTECTORS!
I have been fine in the past with cheap screen protectors from eBay. They got the job done, and they were only a dollar or two. And you got six of them.
Anticipating the arrival of my N5, I bought a Spigen Neo-Hybrid case (Which is excellent), and some cheap screen protectors for $2. (12 to be exact)
http://www.ebay.com/itm/231089059032?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I bought a bunch because that gives ample headroom if you mess up a few times.
I try to install the first one, and it ends up with bubbles near the cutouts for the speaker and camera. Okay, I'll just try another one.
I've gone through six of them, and they all have the same bubble problem near the cutouts.
I ended up buying higher-end screen protectors: http://www.amazon.com/gp/product/B00EV97UD6/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I'll be sure to report on those when they arrive.
But the lesson is to be cautious with cheap screen protectors.
Click to expand...
Click to collapse
I've got some of the iSmooth protectors and they are quite good...once I properly installed them. Dry apply are a little tricky but there are enough tutorials and videos to help. I also have the Neo Hybrid and I'm quite happy with it.
BigOkie said:
I've got some of the iSmooth protectors and they are quite good...once I properly installed them. Dry apply are a little tricky but there are enough tutorials and videos to help. I also have the Neo Hybrid and I'm quite happy with it.
Click to expand...
Click to collapse
I guess I lucked out with my choice of screen protector!
Not necessarily. I bought these SAMAR crystal clear screen protectors, managed to apply one without getting any dust or air bubbles. It has all the cutouts, the fit is good, and it is quite smooth when swiping, very happy with it so far. To top it all off it is dirt cheap and you get 6 protectors all with cleaning cloths! I've read others on here who have been happy with this brand too. Would definitely recommend.
use a drop of water when u install. it'll help take out bubbles.
also you can reapply these, just rinse in soap water then water, then shake off excess and apply. squeegee out the water - should be next to nothing.
ktamondo said:
The xtremeguard screen protectors are really good, and they can be found for under $2.
Click to expand...
Click to collapse
True. And even with that. I got one first and tested before I got backups.
I use an IQshield screen protector and it's nothing short of pure awesome. No bubbles at all, and it's so smooth and dried hard. It feels like glass.
You get what you pay for. I bought the spiegen Crystal for 10 bucks and they went on perfect and looked perfect and felt pretty good to you cant even tell its on unless you look at the earpiece closely. But there's always better! I just recently bought a Nillkin Glass screen protector with 9h hardness and olephobic with rounded edges and its gonna be getting here in a week or so and that should be way better than a cheap or high quality screen protector!
This sounds silly, but whenever I install a cheap screen protector, I do two things: first, i make sure the side that's going to be applied to the screen is FACE DOWN. Never face it up, under any circumstances. if I do, its before removing from packaging. I even remove the adhesive that protects the protector itself, with the screen protector face down. this doesn't give a chance for dust to sit on the bottom of the screen when facing up. Yes im sure any dust flying around will still find a way to stick, but this reduces the chances. Plus, you make sure you are applying in a clean environment anyway. I usually vaccum the house (or area at least) prior to applying, and give the dust time to settle afterwards.
second, and heres the silly part: I make sure the screen is completely wiped, and blow on the screen itself with DRY LIPS as im applying the screen protector face down. This blows off any dust that may settle between the time you apply the screen, and make sure lips are dry as to not blow moisture onto the screen.
There really isn't any fool proof method for applying screen protectors without dust, but without some sort of clean box with a built in HEPA filtration system, this seems to work well for me 80-90% of the time, versus just applying like normal.
unvaluablespace said:
This sounds silly, but whenever I install a cheap screen protector, I do two things: first, i make sure the side that's going to be applied to the screen is FACE DOWN. Never face it up, under any circumstances. if I do, its before removing from packaging. I even remove the adhesive that protects the protector itself, with the screen protector face down. this doesn't give a chance for dust to sit on the bottom of the screen when facing up. Yes im sure any dust flying around will still find a way to stick, but this reduces the chances. Plus, you make sure you are applying in a clean environment anyway. I usually vaccum the house (or area at least) prior to applying, and give the dust time to settle afterwards.
.
Click to expand...
Click to collapse
You can skip all the surgical-precision vacuuming if you do the application in the bathroom. Turn on the shower, hot as it'll go. Leave it run for 5-10 minutes til the bathroom is steamy. That knocks all the dust out of the air.
Then you can apply your screen protector in peace.
Caelrie said:
You can skip all the surgical-precision vacuuming if you do the application in the bathroom. Turn on the shower, hot as it'll go. Leave it run for 5-10 minutes til the bathroom is steamy. That knocks all the dust out of the air.
Then you can apply your screen protector in peace.
Click to expand...
Click to collapse
but wouldn't that cause moisture in the air? I could see that getting in between the screen during application. I bought a ton of screen protectors like OP though, so I'll have to give this idea a shot lol
The moisture will get out over time. Its just like having windows tinted
Sent from my Nexus 5 using Tapatalk
unvaluablespace said:
but wouldn't that cause moisture in the air? I could see that getting in between the screen during application. I bought a ton of screen protectors like OP though, so I'll have to give this idea a shot lol
Click to expand...
Click to collapse
It doesn't matter. Even dry-applied screen protectors go on better this way, and any moisture completely dries out quickly anyway.
Spend a few hundred dollars on a phone and then buy the cheapest cases and screen protectors you can? Doesn't make sense.
I'll pay the extra $8 for a Spigen screen protector and a quality case that match the quality of my Nexus.
Sent from my Nexus 5 using Tapatalk
Spigen could've tried a bit harder and made all the cutouts. Even the temporary screen protector that comes with the phone has those. I think most screen protectors will be similar at the $1+ range but you can't expect much from ones that cost $0.25.
xtremeguards didn't have bubbles for me. Buying 6 of the same screen protectors and then saying all of them have problems doesn't make sense.
I'm assuming the OP means the bubbles are from the edge of the cutouts not sticking down which is a common issue with cheap screen protectors.
the cutouts are not made well so the screen protector itself is warped at the cutouts for the speakers etc so its not flat and does not stick down creating bubbles there.
Just install in steamy bathroom. The steam prevents dust from floating in the air.
Sent from my Nexus 7 using XDA Premium HD app
I got this Nillkin one: http://dx.com/p/277084. I only had one. Applied by using the "hinge" method. Went perfectly. Cutouts are perfect and bubbles are removed very easy (easier than other screen protectors I've had).
I used a little wet cloth to make my screen wet and to remove dust. At first it feels very rubbery, but after using it for a day or even less, it feels just like the glass!