ROM: I9000JPJPF Arabic Rom - Galaxy S I9000 Android Development

OFFICIAL release
Version: 2.2 Froyo
PDA version I9000JPJPF
PDA Build time: 2010.11.01 11:16:23 KST
PDA Changelog: Unknown
MODEM version I9000JXJPD
MODEM Build time: 2010.10.26 19:35:03 KST
MODEM Changelog: Unknown
The firmware was originally a high package, meaning it is a update patch.
Therefore the system will not boot up properly if the package is flashed with Odin MDL with re-partition option enabled.
I converted it to a middle level package, which can be flashed with Odin MDL with re-partition enabled.
GT-I9000_I9000JPJPF_I9000JXJPD_CODE-MODEM_OSP-MID
CSC_I9000OJPJPF
The MultiCSC supports following product codes:
EGY (Egypt), JED (Saudi Arabia), KSA (UAE), MAT (Morocco), MED (Morocco), MID (UAE), MMC (Libya), MWD (Morocco), PAK (Pakistan), THR (Iran), WAN (Morocco), XSG (UAE), XSS (UAE).
After the has completed, type in *#272*IMEI# to the dialer to select the correct variant (matching your original PCODE).
Use with 512 pit mapping if necessary.

Thanks for upload, I'll try it.
BR
-----
Can I flash it with unofficial Arabic froyo release?
Thanks in advanced.
BR

Richthofen said:
OFFICIAL release
Version: 2.2 Froyo
PDA version I9000JPJPF
PDA Build time: 2010.11.01 11:16:23 KST
PDA Changelog: Unknown
MODEM version I9000JXJPD
MODEM Build time: 2010.10.26 19:35:03 KST
MODEM Changelog: Unknown
The firmware was originally a high package, meaning it is a update patch.
Therefore the system will not boot up properly if the package is flashed with Odin MDL with re-partition option enabled.
I converted it to a middle level package, which can be flashed with Odin MDL with re-partition enabled.
GT-I9000_I9000JPJPF_I9000JXJPD_CODE-MODEM_OSP-MID
CSC_I9000OJPJPF
The MultiCSC supports following product codes:
EGY (Egypt), JED (Saudi Arabia), KSA (UAE), MAT (Morocco), MED (Morocco), MID (UAE), MMC (Libya), MWD (Morocco), PAK (Pakistan), THR (Iran), WAN (Morocco), XSG (UAE), XSS (UAE).
After the has completed, type in *#272*IMEI# to the dialer to select the correct variant (matching your original PCODE).
Use with 512 pit mapping if necessary.
Click to expand...
Click to collapse
So ADJP5 is still the "newest" ROM around?

is it good or not ?

May I ask HOWTO do this "..convert it to a middle level package". or Where I can find the tutorials.

its already converted, just use the files with ODIN

Both files are exe ... I think we could flash only .tar files.....

the exe files are selfextracting files, double click on them and they will extract the tar files

Thanx .........

Fast download link :
I9000JPJPF.rar

Thanks for your work.
my question is, if don't want the CSC to be Arabic country, as I live in the UK, however, I need the phone to write and read in arabic, which CSC file should i use with Odin?
many thanks.

Whats the fastest/easiest way to update JPJPA ?
Is it worth the update ?

Rum is better than any other
Any of them faster
I9000JPJPF
or
I9000JPJPA

what are the system languages? swype language?
how's the right to left support?

i2ammar said:
Thanks for your work.
my question is, if don't want the CSC to be Arabic country, as I live in the UK, however, I need the phone to write and read in arabic, which CSC file should i use with Odin?
many thanks.
Click to expand...
Click to collapse
It`s my question too ....
-----------
Quadrant benchmark with harcore`s speedy kernel (Overkill ext4 lagfix):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Flashed this about 3 hours ago, checked re-partition but all my apps remained intact. i think i was supposed to first flash only the PIT before flashing everything else.
Anyway, this is my first froyo rom experience so i cant compare it to other froyos. but coming from eclair JPJG8 + voodoo, its just as fast, maybe faster, so far with 80+ apps installed and no lag fix. Will probably get faster after a factory reset.
Browser is really smooth and flash videos play suprisingly smooth.
I'm aware though that the real test will be after 2-3 days of using this rom, as froyo tends to become laggy after that.
Quadrant score: 989.
very happy so far.
PS: Thank you OP for posting this!

Guys I still don't have a Market.
in the Preconfig screen it gives me: Sales Code: XSG
and nothing to choose from... when I click on Install it says "Must be three chars".
Any idea ?

is it good

Sound really interesting!!!!
i thing ill give it a go lol, so any issues yet guys ?????

Richthofen said:
OFFICIAL release
Version: 2.2 Froyo
PDA version I9000JPJPF
PDA Build time: 2010.11.01 11:16:23 KST
PDA Changelog: Unknown
MODEM version I9000JXJPD
MODEM Build time: 2010.10.26 19:35:03 KST
MODEM Changelog: Unknown
The firmware was originally a high package, meaning it is a update patch.
Therefore the system will not boot up properly if the package is flashed with Odin MDL with re-partition option enabled.
I converted it to a middle level package, which can be flashed with Odin MDL with re-partition enabled.
GT-I9000_I9000JPJPF_I9000JXJPD_CODE-MODEM_OSP-MID
CSC_I9000OJPJPF
The MultiCSC supports following product codes:
EGY (Egypt), JED (Saudi Arabia), KSA (UAE), MAT (Morocco), MED (Morocco), MID (UAE), MMC (Libya), MWD (Morocco), PAK (Pakistan), THR (Iran), WAN (Morocco), XSG (UAE), XSS (UAE).
After the has completed, type in *#272*IMEI# to the dialer to select the correct variant (matching your original PCODE).
Use with 512 pit mapping if necessary.
Click to expand...
Click to collapse
download Links are down, can you please re-upload them

Related

[ROM] Release: I9000AOJP4, I9000BUJP8 & I9000JVJPF roms

I9000AOJP4
OFFICIAL release
Version: 2.2 Froyo
PDA version I9000AOJP4
PDA Build time: 2010.10.26 14:55:45 KST
PDA Changelog: Unknown
MODEM version I9000AOJP3
MODEM Build time: 2010.10.27 11:32:47 KST
MODEM Platform: Infineon X-Gold 616
Carrier Specific: Yes (O2 Germany)
The rom is intended to be used with O2 Germany branded phones, but with different CSC it can be used anywhere in Europe.
The rom can be used with any of the CSCs listed below.
Swype languages supported by AOJP4:
Swype: Czech, Croatian, Dutch, English, French, German, Greek, Italian, Korean, Polish, Portuguese, Romanian, Slovak, Slovenian, Spanish.
------------------------
I9000BUJP8
OFFICIAL release
Version: 2.2 Froyo
PDA version I9000BUJP8
PDA Build time: 2010.11.10 10:21:44 KST
PDA Changelog: Unknown
MODEM version I9000BUJP5
MODEM Build time: 2010.10.27 13:22:35 KST
MODEM Platform: Infineon X-Gold 616
Carrier Specific: Yes (Vodafone)
The rom is intended to be used with Vodafone branded phones, but with different CSC it can be used anywhere in Europe.
The rom can be used with any of the CSCs listed below.
Swype languages supported by BUJP8:
Swype: Czech, Croatian, Dutch, English, French, German, Greek, Italian, Korean, Polish, Portuguese, Romanian, Slovak, Slovenian, Spanish.
------------------------
I9000JVJPF
OFFICIAL release
Version: 2.2 Froyo
PDA version I9000JVJPF
PDA Build time: 2010.11.02 19:27:57 KST
PDA Changelog: Unknown
MODEM version I9000JXJPD
MODEM Build time: 2010.10.26 19:35:03 KST
MODEM Platform: Infineon X-Gold 616
Carrier Specific: No
The rom can be used with any of the CSCs listed below.
Swype languages supported by BUJP8:
Swype: Dutch, English, French, German, Italian, Korean, Polish, Portuguese, Spanish, Turkish.
I have not modified the code in any way, although I have repacked the release to make CSC selection possible.
Usually Odin3 images are provided in a single integrated .tar package which contain all of the necessary files. This way the CSC cannot be selected separately.
That is why I splitted the release in three different parts (CODE, MODEM, CSC).
Since Odin3 has flashfile checksum support I also added md5 hash tail to the .tar files. This way is more secure because Odin will not allow flashing corrupted images. Flashing takes a bit longer thou because the checksums are checked in the beginning of the update process.
Note: The files are 7zip Self Extractors, double click to extract.
Download links:
GT-I9000_I9000AOJP4_I9000AOJP3_CODE-MODEM_OSP-MID
GT-I9000_I9000BUJP8_I9000BUJP5_CODE-MODEM_OSP-MID
GT-I9000_I9000JVJPF_I9000JXJPD_CODE-MODEM_OSP-MID
CSC_I9000NEEJP4 (Single CSC, Pcode "NEE")
CSC_I9000XEEJP4 (Single CSC, Pcode "XEE")
CSC_I9000XENJP2 (Single CSC, Pcode "XEN")
CSC_I9000OXAJPO (Multi CSC, Pcodes "CPW", "DBT", "KOR", "XEO", "XEU")
CSC_I9000OZSJPD (Multi CSC, Pcodes "BRI", "TGY")
CSC_I9000DBTJP3 (Single CSC, Pcode "DBT")
CSC_I9000ERAJP2 (Single CSC, Pcode "ERA")
CSC_I9000XEFJP3 (Single CSC, Pcode "XEF")
CSC_I9000TMNJP3 (Single CSC, Pcode "TMN")
CSC_I9000ITVJP3 (Single CSC, Pcode "ITV")
CSC_I9000GVODJP7 (Single CSC, Pcode "VOD")
CSC_I9000SERJP1 (Single CSC, Pcode "SER")
CSC_I9000OXXJP7 (Multi CSC, Pcodes "ATO", "AUT", "BSE", "CNX", "COA", "COS", "CRO", "CYO", "CYV", "EUR", "HAT", "IRD", "MET", "MOT", "MOZ", "MSR", "MTL", "O2C", "O2I", "ONE", "ORO", "ORS", "SEB", "SIM", "SMO", "SUN", "TMZ", "TOP", "TPH", "TRA", "TSR", "TWO", "VDH", "VDI", "VIM", "VIP", "VVT", "XEH", "XEO", "XEZ", "XFA", "XFC", "XFE", "XFM")
CSC_I9000O2UJP3 (Single CSC, Pcode "O2U")
CSC_I9000OJPJPF (Multi CSC, Pcodes "EGY", "JED", "KSA", "MAT", "MED", "MID", "MMC", "MWD", "PAK", "THR", "WAN", "XSG", "XSS")
CSC_I9000TWMJP6 (Single CSC, Pcode "TWM")
CSC_I9000OXFJP6 (Multi CSC, Pcodes "BHT", "CNX", "COA", "ERO", "HAT", "KOR", "MSR", "MTL", "ORO", "SIM", "SMO", "TMT", "TOP", "TRA", "TSR", "TWO", "VIM", "VIP", "VVT")
CSC_I9000VIAJP2 (Single CSC, Pcode "VIA")
CSC_I9000PROJP2 (Single CSC, Pcode "PRO")
CSC_I9000OLBJPA (Multi CSC, Pcodes "CCM", "DGI", "GLB", "MIS", "MM1", "SIN", "SMA", "STH", "THL", "UMB", "XEV", "XME", "XSE", "XSO", "XSP", "XTC", "XTE", "XXV")
CSC_I9000OJVJPC (MultiCSC, Pcodes "ABS", "AFR", "ARB", "FWD", "KEN", "OTU", "TMC", "TUN", "TUR")
How to check which CSC (major) version you should use:
Open dialer and type: *2767*4387264636#
The second line will read: PCode:GT-I9000HK?xxx.
Make the last three characters match with the CSC product code.
So how to proceed:
Put your phone to download mode (hold down: volume down, home key, power)
DO NOT plug in your phone yet, Odin / driver does not like it at this stage.
Start Odin3
Tick "Re-Partition", check that "Auto Reboot" and "F. Reset Time" have been ticked.
Click "PIT" button and select s1_odin_20100512.pit file.
Plug in the phone and wait until Odin finds it.
Click "Start" button... <Firmware update start...> <Get PIT for mapping...> appear. The phone will turn off and the screen indicates "Reset". Wait until Odin indicates "Pass".
Plug out your phone, remove the battery, put it back in and put phone to download mode again.
Click "Reset" button in Odin and untick "Re-Partition" box.
DO NOT select PIT file again.
Click "PDA" button and select "CODE_I9000xxJPx.tar.md5" file.
Click "MODEM" button and select "MODEM_I9000xxJPx.tar.md5" file.
Click "CSC" button and select the desired version "CSC_I9000???JP?.tar.md5".
Plug in the phone and wait until Odin finds it.
Click "Start" button and wait until phone reboots with the new software version.
When using a *Multi CSC* you need to select the CSC matching your product code (see above how to check). Open the dialer and type *#272*IMEI# (IMEI being... your 15 digit IMEI code )
Then select the desired CSC version from the list and press "Install".
The phone will reboot once the change is done.[/B]
The rom is a middle package as usual, so no bootloader included.
Regards.
- Nottingham
@richthofen...
Do you by any chance have a csc for vodafone operator for australia?
Sent from my GT-I9000
GREAT : Cooooooking
DocRambone said:
GREAT : Cooooooking
Click to expand...
Click to collapse
*drooling*
What are the chances that these firmwares differ a lot from the official XXJPO and XWJPA firmware ? Especially I9000BUJP8 , seems to be a lot newer . Don't get me wrong I think it's great all these releases are posted , I am just wondering if it would be worthwhile to flash one of these firmwares. ( I am on XWJPA official dutch rght now)
Please report back, im also going to try I9000BUJP8, or I9000JVJPF
flashing
http://www.samsunggalaxysforum.com/...000xfjp7-multicsc(s)-europe-flash-whith-odin/
here you have all csc
i will flash and say what diferences are and how all works
Quadrant Scores - I9000BUJP8
1 run: 921
2 run: 981
3 run: 1006 - woot!
- Now going to try with Super Optimized 4_2 kernel.
Dont know how you can get 2451 xD - im getting with this Firmware 2221 first run. With your lagfix options.
AHA, 2 run: 2377 quadrant. This is going great!! No Lag, Smooth, Testing battery now, running Super Optimized kernel 4_2.
no market on I9000JVJPF
there is no market app
give it 2 fact reset and also wipe everything and swype error force close
scufutz said:
there is no market app
give it 2 fact reset and also wipe everything and swype error force close
Click to expand...
Click to collapse
no market here too
Quadrant with I9000BUJP8 - 4_2 Super Optimized Kernel
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- EDIT: My marked work fine
i was just going to flash, but no market app? how is this possible?
BlueEyes99 said:
i was just going to flash, but no market app? how is this possible?
Click to expand...
Click to collapse
- My marked works fine. I got marked v 2.09
Thx you so much for all your work, Richthofen! Great job, i really appreciate all what you have done (and perhaps will do) for us!
So, Thank You!
I also have no market on JPF... Did a factory reset, still nothing.
aeo087 said:
I also have no market on JPF... Did a factory reset, still nothing.
Click to expand...
Click to collapse
- Go for I9000BUJP8
Great Job.
No problems so far with I9000BUJP8 and CSC_I9000OXXJP7 (EUR ) Greece
and with Super Optimized Kernel (4_2 STABLE) even better
Isn't JP8 meant for Vodafone?
I think its the same as JPA/JPO but modified for other country/carriers.
Since JPM/JP6 its very hard to get behind Samsungs naming.
Please give us battery report
Sent from my GT-I9000 using XDA App

HWC2 - Mar 2023 | GALAXY S10+ | Official Firmware (SM-G975F) | 24th March 2023

In this thread, you can discuss and share the Mega links of new firmwares (OFFICIAL STOCK) for the Galaxy S10+
NO CUSTOM ROM's and/or ROOT-talk
How to flash the firmware to your phone:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download Odin v3.14.4
3. Extract the Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.14.4
5. Power OFF your S10+
6. Reboot Phone in Download Mode (1st plug-in USB-cable to your S10+!!!), push Bixby + Volume Down buttons, while pushing them plug-in USB-cable to PC. Or use the command "adb reboot-bootloader".
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
10. Click the start button, sit back and wait few minutes for the device to automatically restart.
*** You can always find the LATEST firmware in message #2
I have taken over these threads and they are dedicated to the memory of Henk, you can read more about him here:
RIP Henk, saying goodbye to our good friend and colleague
It's a sad day for all of us at SamMobile. One of the biggest Samsung fans is no longer among ...
www.sammobile.com
Latest firmware for the Galaxy S10+
This is the latest ROM for Multi-CSC OXM and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is an official Samsung ROM so KNOX will not be triggered!
(No changelog image available yet)
What's new:
* January security patches (Samsung Android Security Updates)
* The security of your device has been improved.
Model SM-G975F
Model name Galaxy S10+
Country Multi-CSC OXM
Version Android 12
Changelist 25257816
Build date Fri, 06 Jan 2023 07:46:08 +0000
Security Patch Level 2023-01-01
Multi-CSC OXM
PDA G975FXXSGHWA3
CSC G975FOXMGHWA3
Details for download with Frija:
Unzip the archive and place the files in the designated slots in Odin 3.14.4
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset to factory settings
Multi-CSC Descriptions
The European model of the S10+ (SM-G975F) will get a Multi-CSC designated as OXM and that is the main focus of this particular thread but others can and will be discussed.
CountryProduct CodeMulti-CSCAfghanistan AFGOXMAustralia XSAOXMAustralia OPSOXMAustralia TELOXMAustralia VAUOXMAustria ATOOXMBaltic SEBOXMBangladesh BNGOXMBulgaria BGLOXMCambodia CAMOXMCaucasus Countries CAUOXMChile CHOOXMColombia COOOXMCzech Republic XEZOXMEgypt EGYOXMFrance XEFOXMGermany DBTOXMGreece EUROXMHungary XEHOXMIndia INSOXMIran THROXMIraq MIDOXMIsrael ILOOXMItaly ITVOXMKazakhstan SKZOXMKenya AFROXMKenya DKROXMLibya BTCOXMLuxembourg LUXOXMMalaysia XMEOXMMorocco MWDOXMNepal NPLOXMNetherlands PHNOXMNew Zealand TNZOXMNew Zealand NZCOXMNew Zealand VNZOXMNigeria ECTOXMNordic countries NEEOXMPakistan PAKOXMPanama TPAOXMPeru PEOOXMPhilippines GLBOXMPhilippines XTCOXMPhilippines SMAOXMPoland XEOOXMPortugal TPHOXMRomania ROMOXMRussia SEROXMSaudi Arabia ACROXMSaudi Arabia KSAOXMSingapore MM1OXMSingapore XSPOXMSingapore SINOXMSingapore STHOXMSlovakia ORXOXMSlovenia SIOOXMSouth Africa XFEOXMSouth Africa XFAOXMSouth Africa XFVOXMSouth East Europe SEEOXMSpain PHEOXMSri Lanka SLKOXMSwitzerland AUTOXMTaiwan BRIOXMThailand THLOXMThailand MYMOXMTrinidad and Tobago EONOXMTunisia TUNOXMTurkey TUROXMUkraine SEKOXMUnited Arab Emirates XSGOXMUnited Arab Emirates LYSOXMUnited Kingdom BTUOXMUnited Kingdom / Ireland XEUOXMUnknown XNZOXMUnknown MXOOXMUnknown LAOOXMUnknown DOOOXMUzbekistan CACOXMVietnam XXVOXM
These are the other Multi-CSC types available that may see new updates released at different times:
CountryProduct CodeMulti-CSCAustria DRECKHIreland 3IECKHItaly HUICKHSweden HTSCKHUnited Kingdom H3GCKH
CountryProduct CodeMulti-CSCAustria MAXODXAustria TRGODXCroatia DHRODXCroatia CROODXCzech Republic TMZODXGermany DTMODXGreece COSODXHungary TMHODXMacedonia MBMODXNetherlands DNLODXNetherlands TNLODXPoland TPLODXRomania COAODXSlovakia TMSODX
CountryProduct CodeMulti-CSCFrance FTMOGCPoland OPVOGCRomania OROOGCSlovakia ORSOGCSpain AMOOGC
CountryProduct CodeMulti-CSCSpain XECOTFUnited Kingdom O2UOTF
CountryProduct CodeMulti-CSCAustria MOBOVFCroatia VIPOVFCyprus CYVOVFCzech Republic VDCOVFGermany VD2OVFGreece VGROVFItaly OMNOVFNetherlands VDFOVFPortugal TCLOVFRomania CNXOVFSlovenia SIMOVFSpain ATLOVFSwitzerland SWCOVFUnited Kingdom VODOVF
CountryProduct CodeMulti-CSCArgentina CTIOWABrazil ZTAOWAChile CRCOWAChile CHLOWAColombia COMOWADominican Republic CDROWAEcuador ECOOWAGuatemala PGUOWAMexico TCEOWAPanama CPAOWAPeru PETOWAPuerto Rico PCTOWAUruguay CTUOWA
CountryProduct CodeMulti-CSCArgentina PSNOWBBrazil ZTMOWBParaguay PSPOWB
CountryProduct CodeMulti-CSCMexico IUSOWCMexico UNEOWC
CountryProduct CodeMulti-CSCArgentina ANCOWEChile CHEOWEChile CHXOWECosta Rica ICEOWEDominican Republic DOROWEEcuador ALEOWEJamaica JDIOWEPanama PCWOWEPeru PNTOWEUnknown BATOWE
CountryProduct CodeMulti-CSCColombia COLOWMGuatemala CGUOWMParaguay TGPOWMUnknown BVTOWM
CountryProduct CodeMulti-CSCArgentina AROOWOBolivia BVOOWOBrazil ZTOOWOParaguay UPOOWO
CountryProduct CodeMulti-CSCArgentina UFNOWTBrazil ZVVOWTChile CHTOWTColombia COBOWTEcuador EBEOWTGuatemala TGUOWTMexico TMMOWTPanama PBSOWTPeru SAMOWTSouth America CRMOWTSouth America NBSOWTUruguay UFUOWT
CountryProduct CodeMulti-CSCFrance SFROXJPortugal MEOOXJ
Lastly, phones with these product codes do not currently share CSC with different countries:
CountryProduct CodeCSCBosnia and Herzegovina BHTBHTFrance BOGBOGItaly TIMIM4Slovenia MOTMOTSerbia MSRMSRCzech Republic O2CO2CUnited Kingdom EVROBEIndonesia XIDOLEPoland PLSPLSPoland PRTPRTSerbia TOPTOP
No Root , no Exposed ! , enjoying Note9 with Rooted Oreo & exposed installed .
henklbr said:
In this thread, You can share the Mega-Links of new firmware's (OFFICIAL STOCK) for the Galaxy Note9 (so: NO CUSTOM ROM's and/or ROOT-talk)...
How to flash firmware to your phone:
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download Odin v3.13.1
3. Extract Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.13.1
5. Power OFF Note9
6. Reboot Phone in Download Mode (1st plug-in USB-cable to your S10+!!!, push Bixby + Volume Down buttons, while pushing them plug-in USB-cable to PC
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots
9. Make sure re-partition is NOT ticked
10. Click the start button, sit back and wait few minutes
*** You can always find the LATEST firmware in msg #2
Click to expand...
Click to collapse
Nothing about the front camera led notifications?
@henklbr plz correct "Note 9" to Galaxy S10+ in the first msg .
Bofahad said:
No Root , no Exposed ! , enjoying Note9 with Rooted Oreo & exposed installed .
Click to expand...
Click to collapse
Actually, this thread is about S10+'s stock firmwares
iteam said:
Nothing about the front camera led notifications?
Click to expand...
Click to collapse
Nope,only time will tell.
Virgo_Guy said:
@henklbr plz correct "Note 9" to Galaxy S10+ in the first msg .
Click to expand...
Click to collapse
Done: thanks
Hi I am not able to boot into recovery mode or download mode. I am aware of three button method, I have been flashing ROMS since S6 Has anything changed?
rishab_s said:
Hi I am not able to boot into recovery mode or download mode. I am aware of three button method, I have been flashing ROMS since S6 Has anything changed?
Click to expand...
Click to collapse
Have you read msg #1?
Procedure download-mode can be found there...
Recovery: VolUP-Bixby-Power
Does Any One Have The Build.prop For the Galaxy S10 ?????
OFF-TOPIC!
serg2018 said:
Does Any One Have The Build.prop For the Galaxy S10 ?????
Click to expand...
Click to collapse
This has nothing to do with thread's subject...
"G975FXXU1ASBA" mirrors:
MEGA:
https://mega.nz/#!3apTwYAR!NQOEw6vusVROIMjiruLWJXNmrKp4I7BsEPTu3nwcn5Q
Androidfilehost:
https://www.androidfilehost.com/?fid=1395089523397910201
Could anyone that has downloaded this, may do me a favor of sharing the file checksum? I downloaded from somewhere else earlier, but wanna make sure is legit... Thanks!
henklbr said:
This ROM is the latest ROM for Multi-CSC OXM released 08 Mar 19, and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is official Samsung ROM, so KNOX won't be triggered!
What's new:
* OneUI Pie (Android 9)
* February security patches (Samsung Android Security Updates)
· The stability of Camera has been improved
· The performance of Fingerprint recognition has been improved
· Added feature to set the app or function which runs when the Bixby key is pressed
Model SM-G975F
Model name Galaxy S10+
Country Multi-CSC OXM
Version Android 9
Changelist 15445945
Build date Sun, 24 Feb 2019 04:49:44 +0000
Security Patch Level 2019-02-01
Multi-CSC OXM
PDA G975FXXU1ASBA
CSC G975FOXM1ASBA
Details for download with SamFirm:
UN-ZIP the archive and place the files in the designated slots in Odin 3.13.1
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will be resetted
SM-G975F OXM multi CSC ( ACR AFG AFR ATO AUT BGL BNG BRI CAC CAM CAU CHO COO DBT DKR ECT EGY EON EUR ILO INS ITV KSA LAO LUX MID MWD MXO MYM NEE NPL ORX PAK PEO PHE PHN ROM SEB SEE SEK SKZ SLK SMP THL THR TPA TPH TTT TUN TUR XEF XEH XEO XEU XEZ XFE XME XSG XSP XTC XXV )
single : ( BTC BTU CPW DOO EMP GLB GTO LYS MAT MM1 NZC OPS SER SIN SIO SMA STH TEB TEL TMC TNZ VAU VNZ WTL XFA XNZ XSA )
by default : DBT
Click to expand...
Click to collapse
Brazil ZTO CSC is not part of Multi-CSC OXM too? In Brazil the S10's versions will come with Exynos this time
cdneto said:
Brazil ZTO CSC is not part of Multi-CSC OXM too? In Brazil the S10's versions will come with Exynos this time
Click to expand...
Click to collapse
Nope: Brazil (ZTO) is part of Multi-CSC OWO
I have tried to flash with OWO CSC but doens´t work. My S10 came from another country and flashing with this OWO version (ZTO) it kept the previous configuration and Samsung Pay doens´t work. Then I downloaded a french one with OXM CSC and it´s not perfect as some services comes in French but Samsung Pay is working in Brazil. Hopefully they will release a OXM ZTO and then could work. With the OWO doens´t work. I´ve tried everything CSC only (wipe), with Home, etc....doens´t work
henklbr said:
The European model of the S10+ (SM-G975F) will get a Multi-CSC -> OXM
SM-G975F OXM multi CSC ( ACR AFG AFR ATO AUT BGL BNG BRI CAC CAM CAU CHO COO DBT DKR ECT EGY EON EUR ILO INS ITV KSA LAO LUX MID MWD MXO MYM NEE NPL ORX PAK PEO PHE PHN ROM SEB SEE SEK SKZ SLK SMP THL THR TPA TPH TTT TUN TUR XEF XEH XEO XEU XEZ XFE XME XSG XSP XTC XXV )
single : ( BTC BTU CPW DOO EMP GLB GTO LYS MAT MM1 NZC OPS SER SIN SIO SMA STH TEB TEL TMC TNZ VAU VNZ WTL XFA XNZ XSA )
by default : DBT
Click to expand...
Click to collapse
for SM-G975F OXM DBT is not the CSC by default
so if you are not able to extract CSC from firmware please respect forum rules
thanks
yakapa40 said:
for SM-G975F OXM DBT is not the CSC by default
so if you are not able to extract CSC from firmware please respect forum rules
thanks
Click to expand...
Click to collapse
1. I DO respect the rules of the forum
2. On this forum we do help eachother, not to react/correct someone in an "arrogant" way -> not amused (you could telling me also via DM, don't you agree?)
3. thank you for telling me the "correct default CSC".
i have no PM , where you ask me if you can post OXM multi CSC and for helping eachother , here in post11 :
https://forum.xda-developers.com/s1...pdate-odin-t3908710/post79091791#post79091791
Ok sorry if I am a bit junior on this but I have flashed other galaxy with ZTO (Brazil) and always worked well. It's the first time I downloaded the ZTO (OWO compilation) and doesn't work. If someone here can help or "teach" me how can I have Brazilian services changing the CSC to ZTO on OWO compilation posted on SAMMOBILE I do appreciate. For me the only working is OXM but still many services such as concierge in French.
Thanks

[FUBD] OFFICIAL STOCK FW-update (Odin) thread (25 Feb 21) GALAXY Note10+ SM-N975F/DS

In this thread, You can share the Mega-Links of new firmware's (OFFICIAL STOCK) for the Galaxy Note10+ (so: NO CUSTOM ROM's and/or ROOT-talk)...
How to flash firmware to your phone:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download Odin v3.14.4
3. Extract Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.14.4
5. Power OFF your Note10+
6. Reboot Phone in Download Mode (1st plug-in USB-cable to your Note10+!!!), push Volume Up + Volume Down buttons, while pushing them plug-in USB-cable to PC
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots
9. Make sure re-partition is NOT ticked
10. Click the start button, sit back and wait few minutes
*** You can always find the LATEST firmware in msg #2
Latest Firmware Note10+
This ROM is the latest ROM for Multi-CSC OXM released 25 Feb 21, and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is official Samsung ROM, so KNOX won't be triggered!
What's new:
* March security patches (Samsung Android Security Updates)
* OneUI 3.1
* The security of your device has been improved
Model SM-N975F
Model name Galaxy Note10+
Country Multi-CSC OXM
Version Android 11
Changelist 21054212
Build date Thu, 18 Feb 2021 05:22:26 +0000
Security Patch Level 2021-03-01
Multi-CSC OXM
PDA N975FXXU6FUBD
CSC N975FOXM6FUBD
Details for download with Frija:
UN-ZIP the archive and place the files in the designated slots in Odin 3.14.4
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset
SM-N975F OXM multi-CSC:
ACR AFG AFR ATO AUT BGL BNG CAC CAM CAU CHO COO DBT DKR ECT EGY EON EUR GTO ILO INS ITV KSA LAO LUX MID MWD MXO MYM NEE NPL ORX PAK PEO PHE PHN ROM SEB SEE SEK SKZ SLK SMP THL TPH TTT TUN TUR XEF XEH XEO XEU XEZ XFE XME XSG XSP XTC XXV
BKD BTC BTU CPW GLB ILP LYS MM1 NZC OPS SER SIN SIO SMA STH TEL TNZ TPA VAU VNZ XFA XFV XNZ XSA
By default : AUT
Multi-CSC OXM
SM-N975F OXM multi-CSC:
ACR AFG AFR ATO AUT BGL BNG CAC CAM CAU CHO COO DBT DKR ECT EGY EON EUR GTO ILO INS ITV KSA LAO LUX MID MWD MXO MYM NEE NPL ORX PAK PEO PHE PHN ROM SEB SEE SEK SKZ SLK SMP THL TPH TTT TUN TUR XEF XEH XEO XEU XEZ XFE XME XSG XSP XTC XXV
BKD BTC BTU CPW GLB ILP LYS MM1 NZC OPS SER SIN SIO SMA STH TEL TNZ TPA VAU VNZ XFA XFV XNZ XSA
By default : AUT
N975FXXU1ASH5 (Multi-CSC OXM)
This ROM is the latest ROM for Multi-CSC OXM released 15 Aug 19, and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is official Samsung ROM, so KNOX won't be triggered!
What's new:
* August security patches (Samsung Android Security Updates)
* Initial Firmware
* Camera Firmware update
Model SM-N975F
Model name Galaxy Note10+
Country Multi-CSC OXM
Version Android 9
Changelist 16618471
Build date Fri, 09 Aug 2019 07:17:48 +0000
Security Patch Level 2019-08-01
Multi-CSC OXM
PDA N975FXXU1ASH5
CSC N975FOXM1ASH5
Details for download with Frija:
UN-ZIP the archive and place the files in the designated slots in Odin 3.13.3
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will be resetted
SM-N975F OXM multi-CSC:
ACR AFG AFR ARO ATO AUT BGL BNG BTC BTU CAC CAM CAU CHO COO CPW DBT DKR DOO ECT EGY EON EUR FWD GLB GTO ILO INS ITV KSA LAO LUX LYS MID MM1 MWD MXO MYM NEE NPL NZC OPS ORX PAK PEO PHE PHN ROM SEB SEE SEK SER SIN SIO SKZ SLK SMA SMP STH TEL THL TNZ TPA TPH TTT TUN TUR VAU VNZ XEF XEH XEO XEU XEZ XFA XFE XFV XME XFG XNZ XSA XSP XTC XXV
By default : XEF
Great, thanks for maintaining this on the other tread! All we need is @jaylence to obtain Note 10 and OTA flow to continue
Download "N975FXXU1ASH5" firmware:
AndroidFileHost
henklbr said:
In this thread, You can share the Mega-Links of new firmware's (OFFICIAL STOCK) for the Galaxy Note10+ (so: NO CUSTOM ROM's and/or ROOT-talk)...
How to flash firmware to your phone:
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download Odin v3.13.3
3. Extract Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.13.3
5. Power OFF your S10+
6. Reboot Phone in Download Mode (1st plug-in USB-cable to your Note10+!!!), push Volume Up + Volume Down buttons, while pushing them plug-in USB-cable to PC
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots
9. Make sure re-partition is NOT ticked
10. Click the start button, sit back and wait few minutes
*** You can always find the LATEST firmware in msg #2
Click to expand...
Click to collapse
Sir, in line 5 it reads as S10 +. Humble request to change to note 10 . Because it is causing confusion.
Off topic post removed by OP request.
Is there a root or not ??
No ROOT talk in this thread!
AboodySahhaf said:
Is there a root or not ??
Click to expand...
Click to collapse
Read message #1 first sentence...
Anyone have AT&T firmware I can flash to my unlocked note 10+ for wifi calling etc?
OFF-TOPIC!
jwbolfer said:
Anyone have AT&T firmware I can flash to my unlocked note 10+ for wifi calling etc?
Click to expand...
Click to collapse
Read the thread's subject:
This thread is about the "International SM-N975F" model of the Note10+, not the US-model...
Hello,
Just wanted to ask help here.. I just got my Note10+ here in PH and locked by my carrier Globe. Can i flash an openline firmware and will it trigger knox voiding my warranty? I have attached the screenshot of my phone software information. Appreciate your help which sofware I can download and flash via Odin. Thanks in advance!
SM-N975F/DS https://m.imgur.com/a/IofpGBQ
Got my N10 plus today and received the august update right away
Verstuurd vanaf mijn SM-N975F met Tapatalk
bh0n said:
Hello,
Just wanted to ask help here.. I just got my Note10+ here in PH and locked by my carrier Globe. Can i flash an openline firmware and will it trigger knox voiding my warranty? I have attached the screenshot of my phone software information. Appreciate your help which sofware I can download and flash via Odin. Thanks in advance!
SM-N975F/DS https://m.imgur.com/a/IofpGBQ
Click to expand...
Click to collapse
Your CSC won't change, because Globe and Open Line are both in Multi-CSC OXM
Any suggestions how can i make my unit openline? Badly need it. Thank you!
Would this work in Australia rom? XSA or TEL? Same model N975F.
Thank you
henklbr said:
Your CSC won't change, because Globe and Open Line are both in Multi-CSC OXM
Click to expand...
Click to collapse
So there would be no other way to change the CSC and possible to open line our unit? Or we can flash a different region that is not in the Multi-CSC?
henklbr said:
Your CSC won't change, because Globe and Open Line are both in Multi-CSC OXM
Click to expand...
Click to collapse
I would also like to know the right way to change the CSC. Currently on ASH5 rom with XSA CSC. Would like to swap to THL. I have a thailand sim card but the normal method of reset with sim card inserted didn't work like it worked for my Note8
rexii2323 said:
I would also like to know the right way to change the CSC. Currently on ASH5 rom with XSA CSC. Would like to swap to THL. I have a thailand sim card but the normal method of reset with sim card inserted didn't work like it worked for my Note8
Click to expand...
Click to collapse
Could you go to Software Info on your device, scroll down to "Software Serviceprovider" and post that info here (screenshot)...

[ROM][A515x] RefinedUI v1.0 [OneUI2.1 - Android10]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ABOUT THE ROM:
Its based on the stock One UI 2.1 of the Galaxy A51 but adapted to the new binary that came with OneUI 2.5 (Binary 4), so u need to have this last binary to avoid problems
GENERAL FEATURES:
- Animations 0.1x to 10x (in developer options)
- Patched theme store (U can use themes and icons for infinite time)
- Unlock by fingerprint after reboot
- Disabled signature verification
- Disabled flag secure (take screenshots from locked apps)
- Added functional AppLock with fingerprint
- Unlocked OMC/CSC (support to multiple countries)
- Aroma installer support
- Secure Folder fixed
- Ofc debloated
AROMA FEATURES:
- KERNEL selection (Stock/Daunesia)
- Patched VBMETA selection (In case u havent installed it yet)
- Patched PARAM selection (To disable all warnings cuz the bootloader unlocked)
- BLOATWARE selection (U can select some apps/services that u like)
- Third party apps selection (Extra applications that are installed directly on the system)
- Enable or disable Multiwindow Tray (Galaxy Fold Panel)
- And some customization options like hexagonal toggles, remove battery limit to use the flash in the camera . . .
SUPPORTED COUNTRY CODES
If u experience problems, possibly the country code of the latest firmware that u installed from Odin isnt supported​
Code:
ACR
AFG
AFR
ARO
ATO
AUT
BGL
BNG
BRI
CAC
CAM
CHO
COO
DBT
DKR
ECT
EGY
EON
ETL
EUR
ILO
INS
ITV
KSA
LAO
LUX
MID
MWD
MYM
NEE
NPL
ORX
PAK
PHE
PHN
ROM
SEB
SEE
SEK
SER
SKZ
SLK
SRR
THL
THR
TKD
TPA
TPH
TTT
TUN
TUR
XEF
XEH
XEO
XEU
XFE
XME
XSG
XSP
XTC
XXV
ZTO
MAT
CEL
WTL
PTR
GLB
TMC
XFE
SIO
XFV
PCL
SMP
ILP
BTU
TEB
FWD
CPW
BTC
STH
SIN
MM1
XFA
SMA
LYS
WHAT CAN I DO IF THE COUNTRY CODE ISNT THERE?​
Code:
U should do some extra steps after installing the rom:
The idea is to change ur current country code for one that is supported and that preferably is close to ur country (Not necessarily)
+++++ITS RECOMMENDED TO MAKE A BACKUP OF THE EFS
Okey, with some root explorer open these files as a textfile:
/efs/imei/mps_code.dat
/efs/imei/omcnw_code.dat
/efs/imei/omcnw_code2.dat
Inside is a 3-digit code, just change it to a supported one like "XSG"
Restart and u should no longer have any problems
INSTALLATION:​WARNING: Before continuing u should know that ur bootloader must be completely unlocked and have TWRP installed, u can get more info HERE
EXTRA_WARNING: U need Binary 4 for correct operation, if u updated to OneUI 2.5 u already have this binary
Wipe data/cache/dalvik (Although a full formatting is recommended and its necessary if u have ur data encrypted)​
Install RefinedUI_A515_BlassGO.zip​
Configure the Aroma installer to ur liking​
Then install RefinedUI_Dynamic_Finish_Installation.zip​
Flash Magisk CANARY (The rom is already pre-rooted but a direct magisk installation is recommended)​
Restart and wait for the first boot​
Enjoy​
CREDITS TO:​
@amarullz (Original developer of the Aroma Installer)
@hendramanu (Developer of Daunesia Kernel)
@osm0sis (For his work with dynamic partitions)
THE DOWNLOADS IN THE NEXT POST​
DOWNLOADS ​RefinedUI by BlassGO:
GOOGLE DRIVE
RefinedUI_Dynamic_Finish_Installation:
GOOGLE DRIVE
Magisk Canary:
GOOGLE DRIVE
​
Extra reserved​
Good Jobs! Secure Folder worked and No bug found.. work with latest magisk v21.4. According to me, this rom suitable for daily use.
redymedan said:
Good Jobs! Secure Folder worked and No bug found.. work with latest magisk v21.4
Click to expand...
Click to collapse
Wow great!
redymedan said:
Good Jobs! Secure Folder worked and No bug found.. work with latest magisk v21.4
Click to expand...
Click to collapse
How could u make a video so fast, u amazed me
BlassGO said:
How could u make a video so fast, u amazed me
Click to expand...
Click to collapse
I have talked in PM, I recorded when tested it.. just waiting you publish it Up to now, no problem found everything working good
redymedan said:
I have talked in PM, I recorded when tested it.. just waiting you publish it Up to now, no problem found everything working good
Click to expand...
Click to collapse
Is it working normal?
1. MTP?
2. Proximity Sensor?
3. Ultrawide camera?
azteria2000 said:
Is it working normal?
1. MTP?
2. Proximity Sensor?
3. Ultrawide camera?
Click to expand...
Click to collapse
MTP worked, Ultrawide camera wide worked, Proximity I don't use it..
Bundle of thanks for sharing awesome ROM❤❤❤
@BlassGO
Does this custom rom improves gaming performance ??, I have one more question, has some overclocking for the a51
] this custom rom improves gaming performance ??, I have one more question, has some overclocking for the a51
Hello, this would be a rom stock but without so many applications and more stable with the root and that? In which I have if I delete pre-installed applications, when I restart it stays in bootloop, I hope I explained it well, greetings!
ImperialgamesYT said:
] this custom rom improves gaming performance ??, I have one more question, has some overclocking for the a51
Click to expand...
Click to collapse
ImperialgamesYT said:
] this custom rom improves gaming performance ??, I have one more question, has some overclocking for the a51
Click to expand...
Click to collapse
I havent really tested it in games, but many say it runs very smoothly
Nachopincha said:
Hello, this would be a rom stock but without so many applications and more stable with the root and that? In which I have if I delete pre-installed applications, when I restart it stays in bootloop, I hope I explained it well, greetings!
Click to expand...
Click to collapse
Yeah, its an improved stock to have a better experience, it has extras that u can see in the thread
You
BlassGO said:
View attachment 5191991
ABOUT THE ROM:
Its based on the stock One UI 2.1 of the Galaxy A51 but adapted to the new binary that came with OneUI 2.5 (Binary 4), so u need to have this last binary to avoid problems
GENERAL FEATURES:
- Animations 0.1x to 10x (in developer options)
- Patched theme store (U can use themes and icons for infinite time)
- Unlock by fingerprint after reboot
- Disabled signature verification
- Disabled flag secure (take screenshots from locked apps)
- Added functional AppLock with fingerprint
- Unlocked OMC/CSC (support to multiple countries)
- Aroma installer support
- Secure Folder fixed
- Ofc debloated
AROMA FEATURES:
- KERNEL selection (Stock/Daunesia)
- Patched VBMETA selection (In case u havent installed it yet)
- Patched PARAM selection (To disable all warnings cuz the bootloader unlocked)
- BLOATWARE selection (U can select some apps/services that u like)
- Third party apps selection (Extra applications that are installed directly on the system)
- Enable or disable Multiwindow Tray (Galaxy Fold Panel)
- And some customization options like hexagonal toggles, remove battery limit to use the flash in the camera . . .
SUPPORTED COUNTRY CODES
If u experience problems, possibly the country code of the latest firmware that u installed from Odin isnt supported​
Code:
ACR
AFG
AFR
ARO
ATO
AUT
BGL
BNG
BRI
CAC
CAM
CHO
COO
DBT
DKR
ECT
EGY
EON
ETL
EUR
ILO
INS
ITV
KSA
LAO
LUX
MID
MWD
MYM
NEE
NPL
ORX
PAK
PHE
PHN
ROM
SEB
SEE
SEK
SER
SKZ
SLK
SRR
THL
THR
TKD
TPA
TPH
TTT
TUN
TUR
XEF
XEH
XEO
XEU
XFE
XME
XSG
XSP
XTC
XXV
ZTO
MAT
CEL
WTL
PTR
GLB
TMC
XFE
SIO
XFV
PCL
SMP
ILP
BTU
TEB
FWD
CPW
BTC
STH
SIN
MM1
XFA
SMA
LYS
WHAT CAN I DO IF THE COUNTRY CODE ISNT THERE?​
Code:
U should do some extra steps after installing the rom:
The idea is to change ur current country code for one that is supported and that preferably is close to ur country (Not necessarily)
+++++ITS RECOMMENDED TO MAKE A BACKUP OF THE EFS
Okey, with some root explorer open these files as a textfile:
/efs/imei/mps_code.dat
/efs/imei/omcnw_code.dat
/efs/imei/omcnw_code2.dat
Inside is a 3-digit code, just change it to a supported one like "XSG"
Restart and u should no longer have any problems
INSTALLATION:​WARNING: Before continuing u should know that ur bootloader must be completely unlocked and have TWRP installed, u can get more info HERE
EXTRA_WARNING: U need Binary 4 for correct operation, if u updated to OneUI 2.5 u already have this binary
Wipe data/cache/dalvik (Although a full formatting is recommended and its necessary if u have ur data encrypted)​
Install RefinedUI_A515_BlassGO.zip​
Configure the Aroma installer to ur liking​
Then install RefinedUI_Dynamic_Finish_Installation.zip​
Flash Magisk CANARY (The rom is already pre-rooted but a direct magisk installation is recommended)​
Restart and wait for the first boot​
Enjoy​
CREDITS TO:​
@amarullz (Original developer of the Aroma Installer)
@hendramanu (Developer of Daunesia Kernel)
@osm0sis (For his work with dynamic partitions)
THE DOWNLOADS IN THE NEXT POST​
Click to expand...
Click to collapse
Love all these but I haven't flash a rom before, this one caught my eyes but I will need serious assistant, like how do I back up my app and data faster? How do I fix my device if it goes into boot loop?
Have any one tested the speed of this rom and battery usage? Because my stock ROM battery life is crap and the performance is so horrible, ram always getting occupied, device always getting hot. I just hated the phone. But i want to know if this ROM can help out?
miraclegabriel said:
Love all these but I haven't flash a rom before, this one caught my eyes but I will need serious assistant, like how do I back up my app and data faster? How do I fix my device if it goes into boot loop?
Click to expand...
Click to collapse
miraclegabriel said:
Love all these but I haven't flash a rom before, this one caught my eyes but I will need serious assistant, like how do I back up my app and data faster? How do I fix my device if it goes into boot loop?
Click to expand...
Click to collapse
Hi, with TWRP u can make a backup of data, super, boot, modem, EFS, optics and prism that are the most important (U can only do such a complete backup if u already have twrp installed and u formatted to decrypt data)

How To Guide [EWF1][OneUI 5.1] OFFICIAL STOCK FW (Jun 2023) | Z Fold3 International (SM-F926B)

In this thread, You can share and discuss other links of new official stock firmware for the Galaxy Z Fold 3 International (NO CUSTOM ROMs and/or ROOT talk).
How to flash firmware to your phone:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Extract the firmware file (i.e. to folder C:\Odin) ***
2. Download Odin v3.14.4
3. Extract the Odin ZIP file (i.e. to folder C:\Odin)
4. Open Odin
5. Power OFF your Z Fold3
6. Reboot Phone in Download Mode: Hold down "Volume up" and "Volume down" at same time. While holding down, connect the your phone to your PC via USB. Or use the command "adb reboot-bootloader".
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
10. Click the start button, sit back and wait few minutes for the device to automatically restart.
*** You can find the latest firmware on Post #2
Latest firmware for the Galaxy Z Fold3
CHANGELOG:
• Stability and reliability
Device behavior has been improved.
• Security
The device is protected with improved security.
Click to expand...
Click to collapse
This is the latest ROM for Multi-CSC OXM and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is an official Samsung ROM so KNOX will not be triggered!
Model SM-F926B
Model name Galaxy Z Fold3
Country Multi-CSC OXM
Version Android 13
Changelist 26203421
Build date 2023-06-1
Security Patch Level 2023-06-01
Multi-CSC OXM
PDA F926BXXU4EWF1
CSC F926BOXM4EWF1
Details for download with Frija:
Unzip the archive and place the files in the designated slots in Odin 3.14.4
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset to factory settings
Multi-CSC Descriptions
The Asian model (XTC by default) of the Z Fold3 (SM-F926B) will get a Multi-CSC designated as OXM and that is the main focus of this particular thread but others can and will be discussed.
CountryProduct CodeMulti-CSCAfghanistan(AFG)OXMAlbania(AVF)OXMAustralia(XSA)OXMAustralia(OPS)OXMAustralia(TEL)OXMAustralia(VAU)OXMAustria(DRE)OXMAustria(MOB)OXMAustria(MAX)OXMAustria(ATO)OXMBaltic(SEB)OXMBulgaria(BGL)OXMCaucasus Countries(CAU)OXMChile(CHO)OXMCroatia(CRO)OXMCroatia(VIP)OXMCzech Republic(XEZ)OXMCzech Republic(O2C)OXMCzech Republic(TMZ)OXMCzech Republic(VDC)OXMEgypt(EGY)OXMFrance(XEF)OXMFrance(BOG)OXMFrance(FTM)OXMFrance(SFR)OXMGermany(DBT)OXMGermany(DTM)OXMGermany(VD2)OXMGreece(EUR)OXMGreece(COS)OXMGreece(VGR)OXMHungary(XEH)OXMHungary(TMH)OXMIndia(INU)OXMIraq(MID)OXMIreland(TSI)OXMIreland(MET)OXMIreland(3IE)OXMIreland(VDI)OXMIsrael(ILO)OXMItaly(ITV)OXMItaly(HUI)OXMItaly(TIM)OXMItaly(OMN)OXMKazakhstan(SKZ)OXMKenya(AFR)OXMKenya(DKR)OXMLebanon(ILP)OXMLibya(BTC)OXMLuxembourg(LUX)OXMMacedonia(MBM)OXMMalaysia(XME)OXMMorocco(MWD)OXMNepal(NPL)OXMNetherlands(PHN)OXMNetherlands(TNL)OXMNetherlands(VDF)OXMNigeria(ECT)OXMNordic countries(NEE)OXMPakistan(PAK)OXMPanama(TPA)OXMPhilippines(GLB)OXMPhilippines(XTC)OXMPoland(XEO)OXMPoland(OPV)OXMPoland(PLS)OXMPoland(PRT)OXMPoland(TPL)OXMPortugal(MEO)OXMPortugal(TPH)OXMPortugal(TCL)OXMRomania(ROM)OXMRomania(COA)OXMRomania(ORO)OXMRomania(CNX)OXMRussia(SER)OXMSaudi Arabia(KSA)OXMSaudi Arabia(ACR)OXMSerbia(MSR)OXMSerbia(TOP)OXMSingapore(MM1)OXMSingapore(XSP)OXMSingapore(SIN)OXMSingapore(STH)OXMSlovakia(ORX)OXMSlovakia(ORS)OXMSlovakia(TMS)OXMSlovenia(SIO)OXMSlovenia(MOT)OXMSlovenia(SIM)OXMSouth Africa(XFE)OXMSouth Africa(XFA)OXMSouth Africa(XFV)OXMSouth East Europe(SEE)OXMSpain(PHE)OXMSpain(XEC)OXMSpain(AMO)OXMSpain(ATL)OXMSri Lanka(SLK)OXMSweden(HTS)OXMSwitzerland(AUT)OXMSwitzerland(SWC)OXMThailand(THL)OXMThailand(MYM)OXMTrinidad and Tobago(EON)OXMTunisia(TUN)OXMTurkey(TUR)OXMUkraine(SEK)OXMUnited Arab Emirates(LYS)OXMUnited Arab Emirates(XSG)OXMUnited Kingdom(BTU)OXMUnited Kingdom(EVR)OXMUnited Kingdom(H3G)OXMUnited Kingdom(O2U)OXMUnited Kingdom(VOD)OXMUnknown(EUX)OXMUnknown(EUY)OXMUnknown(XNZ)OXMUzbekistan(CAC)OXMVietnam(XXV)OXM
These are the other Multi-CSC types available that may see new updates released at different times:
CountryProduct CodeMulti-CSCArgentina(ANC)OWEChile(CHE)OWECosta Rica(ICE)OWEDominican Republic(DOR)OWEJamaica(CWW)OWEUnknown(BAT)OWE
CountryProduct CodeMulti-CSCArgentina(ARO)OWOArgentina(CTI)OWOArgentina(UFN)OWOArgentina(PSN)OWOBolivia(BVO)OWOBrazil(ZTO)OWOBrazil(ZTA)OWOBrazil(ZTM)OWOBrazil(ZVV)OWOChile(CRC)OWOChile(CHL)OWOChile(CHT)OWOColombia(COL)OWOColombia(COO)OWOColombia(COM)OWOColombia(COB)OWODominican Republic(CDR)OWOEcuador(EBE)OWOEcuador(ECO)OWOGuatemala(PGU)OWOGuatemala(CGU)OWOMexico(IUS)OWOMexico(TMM)OWOMexico(TCE)OWOPanama(CPA)OWOParaguay(UPO)OWOParaguay(PSP)OWOParaguay(TGP)OWOPeru(PET)OWOPeru(PEO)OWOPeru(PNT)OWOPeru(SAM)OWOSouth America(NBS)OWOUnknown(BVT)OWOUnknown(MXO)OWOUruguay(UFU)OWOUruguay(CTU)OWO
Lastly, phones with these product codes do not currently share CSC with different countries:
CountryProduct CodeCSCIndonesia(XID)OLE
RESERVED #3
Very good
annson08 said:
Multi-CSC Descriptions
The Asian model (XTC by default) of the Z Fold3 (SM-F926B) will get a Multi-CSC designated as OXM and that is the main focus of this particular thread but others can and will be discussed.
CountryProduct CodeMulti-CSCAfghanistan(AFG)OXMAlbania(AVF)OXMAustralia(XSA)OXMAustralia(OPS)OXMAustralia(TEL)OXMAustralia(VAU)OXMAustria(DRE)OXMAustria(MOB)OXMAustria(MAX)OXMAustria(ATO)OXMBaltic(SEB)OXMBulgaria(BGL)OXMCaucasus Countries(CAU)OXMChile(CHO)OXMCroatia(CRO)OXMCroatia(VIP)OXMCzech Republic(XEZ)OXMCzech Republic(O2C)OXMCzech Republic(TMZ)OXMCzech Republic(VDC)OXMEgypt(EGY)OXMFrance(XEF)OXMFrance(BOG)OXMFrance(FTM)OXMFrance(SFR)OXMGermany(DBT)OXMGermany(DTM)OXMGermany(VD2)OXMGreece(EUR)OXMGreece(COS)OXMGreece(VGR)OXMHungary(XEH)OXMHungary(TMH)OXMIndia(INU)OXMIraq(MID)OXMIreland(TSI)OXMIreland(MET)OXMIreland(3IE)OXMIreland(VDI)OXMIsrael(ILO)OXMItaly(ITV)OXMItaly(HUI)OXMItaly(TIM)OXMItaly(OMN)OXMKazakhstan(SKZ)OXMKenya(AFR)OXMKenya(DKR)OXMLebanon(ILP)OXMLibya(BTC)OXMLuxembourg(LUX)OXMMacedonia(MBM)OXMMalaysia(XME)OXMMorocco(MWD)OXMNepal(NPL)OXMNetherlands(PHN)OXMNetherlands(TNL)OXMNetherlands(VDF)OXMNigeria(ECT)OXMNordic countries(NEE)OXMPakistan(PAK)OXMPanama(TPA)OXMPhilippines(GLB)OXMPhilippines(XTC)OXMPoland(XEO)OXMPoland(OPV)OXMPoland(PLS)OXMPoland(PRT)OXMPoland(TPL)OXMPortugal(MEO)OXMPortugal(TPH)OXMPortugal(TCL)OXMRomania(ROM)OXMRomania(COA)OXMRomania(ORO)OXMRomania(CNX)OXMRussia(SER)OXMSaudi Arabia(KSA)OXMSaudi Arabia(ACR)OXMSerbia(MSR)OXMSerbia(TOP)OXMSingapore(MM1)OXMSingapore(XSP)OXMSingapore(SIN)OXMSingapore(STH)OXMSlovakia(ORX)OXMSlovakia(ORS)OXMSlovakia(TMS)OXMSlovenia(SIO)OXMSlovenia(MOT)OXMSlovenia(SIM)OXMSouth Africa(XFE)OXMSouth Africa(XFA)OXMSouth Africa(XFV)OXMSouth East Europe(SEE)OXMSpain(PHE)OXMSpain(XEC)OXMSpain(AMO)OXMSpain(ATL)OXMSri Lanka(SLK)OXMSweden(HTS)OXMSwitzerland(AUT)OXMSwitzerland(SWC)OXMThailand(THL)OXMThailand(MYM)OXMTrinidad and Tobago(EON)OXMTunisia(TUN)OXMTurkey(TUR)OXMUkraine(SEK)OXMUnited Arab Emirates(LYS)OXMUnited Arab Emirates(XSG)OXMUnited Kingdom(BTU)OXMUnited Kingdom(EVR)OXMUnited Kingdom(H3G)OXMUnited Kingdom(O2U)OXMUnited Kingdom(VOD)OXMUnknown(XNZ)OXMUzbekistan(CAC)OXMVietnam(XXV)OXM
These are the other Multi-CSC types available that may see new updates released at different times:
CountryProduct CodeMulti-CSCArgentina(ANC)OWEChile(CHE)OWECosta Rica(ICE)OWEDominican Republic(DOR)OWEJamaica(CWW)OWEUnknown(BAT)OWE
CountryProduct CodeMulti-CSCArgentina(ARO)OWOArgentina(CTI)OWOArgentina(UFN)OWOArgentina(PSN)OWOBolivia(BVO)OWOBrazil(ZTO)OWOBrazil(ZTA)OWOBrazil(ZTM)OWOBrazil(ZVV)OWOChile(CRC)OWOChile(CHL)OWOChile(CHT)OWOColombia(COL)OWOColombia(COO)OWOColombia(COM)OWOColombia(COB)OWODominican Republic(CDR)OWOEcuador(EBE)OWOEcuador(ECO)OWOGuatemala(PGU)OWOGuatemala(CGU)OWOMexico(IUS)OWOMexico(TMM)OWOMexico(TCE)OWOPanama(CPA)OWOParaguay(UPO)OWOParaguay(PSP)OWOParaguay(TGP)OWOPeru(PET)OWOPeru(PEO)OWOPeru(PNT)OWOPeru(SAM)OWOSouth America(NBS)OWOUnknown(BVT)OWOUnknown(MXO)OWOUruguay(UFU)OWOUruguay(CTU)OWO
Lastly, phones with these product codes do not currently share CSC with different countries:
CountryProduct CodeCSCIndonesia(XID)OLE
Click to expand...
Click to collapse
The links lead to S21 Ultra Software, not Z Fold3
hkr said:
The links lead to S21 Ultra Software, not Z Fold3
Click to expand...
Click to collapse
Thanks, updating rn.
EDIT: Updated. Please note that not all countries has firmware for them YET so some links will return as "not found".
annson08 said:
In this thread, You can share and discuss other links of new official stock firmware for the Galaxy Z Fold 3 International (NO CUSTOM ROMs and/or ROOT talk).
How to flash firmware to your phone:
View attachment 5498513
1. Extract the firmware file (i.e. to folder C:\Odin) ***
2. Download Odin v3.14.4
3. Extract the Odin ZIP file (i.e. to folder C:\Odin)
4. Open Odin
5. Power OFF your Z Fold3
6. Reboot Phone in Download Mode: Hold down "Volume up" and "Volume down" at same time. While holding down, connect the your phone to your PC via USB. Or use the command "adb reboot-bootloader".
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
10. Click the start button, sit back and wait few minutes for the device to automatically restart.
*** You can find the latest firmware on Post #2
Click to expand...
Click to collapse
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?
annson08 said:
Multi-CSC Descriptions
The Asian model (XTC by default) of the Z Fold3 (SM-F926B) will get a Multi-CSC designated as OXM and that is the main focus of this particular thread but others can and will be discussed.
CountryProduct CodeMulti-CSCAfghanistan(AFG)OXMAlbania(AVF)OXMAustralia(XSA)OXMAustralia(OPS)OXMAustralia(TEL)OXMAustralia(VAU)OXMAustria(DRE)OXMAustria(MOB)OXMAustria(MAX)OXMAustria(ATO)OXMBaltic(SEB)OXMBulgaria(BGL)OXMCaucasus Countries(CAU)OXMChile(CHO)OXMCroatia(CRO)OXMCroatia(VIP)OXMCzech Republic(XEZ)OXMCzech Republic(O2C)OXMCzech Republic(TMZ)OXMCzech Republic(VDC)OXMEgypt(EGY)OXMFrance(XEF)OXMFrance(BOG)OXMFrance(FTM)OXMFrance(SFR)OXMGermany(DBT)OXMGermany(DTM)OXMGermany(VD2)OXMGreece(EUR)OXMGreece(COS)OXMGreece(VGR)OXMHungary(XEH)OXMHungary(TMH)OXMIndia(INU)OXMIraq(MID)OXMIreland(TSI)OXMIreland(MET)OXMIreland(3IE)OXMIreland(VDI)OXMIsrael(ILO)OXMItaly(ITV)OXMItaly(HUI)OXMItaly(TIM)OXMItaly(OMN)OXMKazakhstan(SKZ)OXMKenya(AFR)OXMKenya(DKR)OXMLebanon(ILP)OXMLibya(BTC)OXMLuxembourg(LUX)OXMMacedonia(MBM)OXMMalaysia(XME)OXMMorocco(MWD)OXMNepal(NPL)OXMNetherlands(PHN)OXMNetherlands(TNL)OXMNetherlands(VDF)OXMNigeria(ECT)OXMNordic countries(NEE)OXMPakistan(PAK)OXMPanama(TPA)OXMPhilippines(GLB)OXMPhilippines(XTC)OXMPoland(XEO)OXMPoland(OPV)OXMPoland(PLS)OXMPoland(PRT)OXMPoland(TPL)OXMPortugal(MEO)OXMPortugal(TPH)OXMPortugal(TCL)OXMRomania(ROM)OXMRomania(COA)OXMRomania(ORO)OXMRomania(CNX)OXMRussia(SER)OXMSaudi Arabia(KSA)OXMSaudi Arabia(ACR)OXMSerbia(MSR)OXMSerbia(TOP)OXMSingapore(MM1)OXMSingapore(XSP)OXMSingapore(SIN)OXMSingapore(STH)OXMSlovakia(ORX)OXMSlovakia(ORS)OXMSlovakia(TMS)OXMSlovenia(SIO)OXMSlovenia(MOT)OXMSlovenia(SIM)OXMSouth Africa(XFE)OXMSouth Africa(XFA)OXMSouth Africa(XFV)OXMSouth East Europe(SEE)OXMSpain(PHE)OXMSpain(XEC)OXMSpain(AMO)OXMSpain(ATL)OXMSri Lanka(SLK)OXMSweden(HTS)OXMSwitzerland(AUT)OXMSwitzerland(SWC)OXMThailand(THL)OXMThailand(MYM)OXMTrinidad and Tobago(EON)OXMTunisia(TUN)OXMTurkey(TUR)OXMUkraine(SEK)OXMUnited Arab Emirates(LYS)OXMUnited Arab Emirates(XSG)OXMUnited Kingdom(BTU)OXMUnited Kingdom(EVR)OXMUnited Kingdom(H3G)OXMUnited Kingdom(O2U)OXMUnited Kingdom(VOD)OXMUnknown(XNZ)OXMUzbekistan(CAC)OXMVietnam(XXV)OXM
These are the other Multi-CSC types available that may see new updates released at different times:
CountryProduct CodeMulti-CSCArgentina(ANC)OWEChile(CHE)OWECosta Rica(ICE)OWEDominican Republic(DOR)OWEJamaica(CWW)OWEUnknown(BAT)OWE
CountryProduct CodeMulti-CSCArgentina(ARO)OWOArgentina(CTI)OWOArgentina(UFN)OWOArgentina(PSN)OWOBolivia(BVO)OWOBrazil(ZTO)OWOBrazil(ZTA)OWOBrazil(ZTM)OWOBrazil(ZVV)OWOChile(CRC)OWOChile(CHL)OWOChile(CHT)OWOColombia(COL)OWOColombia(COO)OWOColombia(COM)OWOColombia(COB)OWODominican Republic(CDR)OWOEcuador(EBE)OWOEcuador(ECO)OWOGuatemala(PGU)OWOGuatemala(CGU)OWOMexico(IUS)OWOMexico(TMM)OWOMexico(TCE)OWOPanama(CPA)OWOParaguay(UPO)OWOParaguay(PSP)OWOParaguay(TGP)OWOPeru(PET)OWOPeru(PEO)OWOPeru(PNT)OWOPeru(SAM)OWOSouth America(NBS)OWOUnknown(BVT)OWOUnknown(MXO)OWOUruguay(UFU)OWOUruguay(CTU)OWO
Lastly, phones with these product codes do not currently share CSC with different countries:
CountryProduct CodeCSCIndonesia(XID)OLE
Click to expand...
Click to collapse
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?
annson08 said:
Latest firmware for the Galaxy Z Fold3
* The Next OTA Update changelog screenshot will be inserted here *
This is the latest ROM for Multi-CSC OXM and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is an official Samsung ROM so KNOX will not be triggered!
What's new:
* Next Update's changelog will be inserted here *
Model SM-F926B
Model name Galaxy Z Fold3
Country Multi-CSC OXM
Version Android 12
Changelist **
Build date **
Security Patch Level **
Multi-CSC OXM
PDA F926BXXS1BUL6
CSC F926BOXM1BUL5
Details for download with Frija:
View attachment 5498529
Unzip the archive and place the files in the designated slots in Odin 3.14.4
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset to factory settings
* Software Information Screenshot will be inserted here *
Click to expand...
Click to collapse
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?
shaifullah.ahad said:
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?
Click to expand...
Click to collapse
Sorry as you have asked three times the link has locked and you must try again tomorrow
I have EUX as product code. Will the firmware work?
/CK
Café King said:
I have EUX as product code. Will the firmware work?
/CK
Click to expand...
Click to collapse
yes, just choose HOME CSC.
shaifullah.ahad said:
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?
Click to expand...
Click to collapse
just use HOME CSC, doesn't matter if it's BKD, MSP, EUX, EUR or else.
As long as you have a SM-F926B model, not U model.
annson08 said:
Latest firmware for the Galaxy Z Fold3
* The Next OTA Update changelog screenshot will be inserted here *
This is the latest ROM for Multi-CSC OXM and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is an official Samsung ROM so KNOX will not be triggered!
What's new:
* Next Update's changelog will be inserted here *
Model SM-F926B
Model name Galaxy Z Fold3
Country Multi-CSC OXM
Version Android 12
Changelist **
Build date **
Security Patch Level **
Multi-CSC OXM
PDA F926BXXS1BUL6
CSC F926BOXM1BUL5
Details for download with Frija:
Unzip the archive and place the files in the designated slots in Odin 3.14.4
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset to factory settings
* Software Information Screenshot will be inserted here *
Click to expand...
Click to collapse
CSC : XID MSR and XSP are all the same, it gives in Friya some difference bul6 bul5 bul4 or bul 6 bul 4 bul4, but when installed, they are identical from decmeber 1th, with same baseband, build number and all.
I´ve the Fold 3 with DBT Eu Germany, can i flash the Build
SM-F926B_1_20211223115230_4zv7w7a7n9_fac
HOME_CSC_OXM_F926BOXM1BUL5 ?
I´m a little afraid
Gojira-r32 said:
CSC : XID MSR and XSP are all the same, it gives in Friya some difference bul6 bul5 bul4 or bul 6 bul 4 bul4, but when installed, they are identical from decmeber 1th, with same baseband, build number and all.
Click to expand...
Click to collapse
MSR and XSP are the same since they both belong in the same multi-CSC family. XID is different, don't get confused. PDA might be the same but contents may differ a little bit. To avoid getting bugs or errors, if you are going to flash firmware from a different multi-CSC, do not use HOME_CSC (this will result in a factory reset).
ShadowK10 said:
I´ve the Fold 3 with DBT Eu Germany, can i flash the Build
SM-F926B_1_20211223115230_4zv7w7a7n9_fac
HOME_CSC_OXM_F926BOXM1BUL5 ?
I´m a little afraid
Click to expand...
Click to collapse
Yes, as long as your current firmware and the new firmware you downloaded belongs to the same multi-CSC, you can use HOME_CSC.
i always use HOME csc
annson08 said:
MSR and XSP are the same since they both belong in the same multi-CSC family. XID is different, don't get confused. PDA might be the same but contents may differ a little bit. To avoid getting bugs or errors, if you are going to flash firmware from a different multi-CSC, do not use HOME_CSC (this will result in a factory reset).
Yes, as long as your current firmware and the new firmware you downloaded belongs to the same multi-CSC, you can use HOME_CSC.
Click to expand...
Click to collapse
Will this wipe the data on my phone?
fripSide-NY said:
Will this wipe the data on my phone?
Click to expand...
Click to collapse
That depends if you are flashing to a different multi-CSC.
If you are flashing to a different multi-CSC then you are required to use CSC instead of HOME_CSC. But if you're flashing to the same multi-CSC, then you just have to use HOME_CSC.
annson08 said:
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset to factory settings
Click to expand...
Click to collapse

Categories

Resources