In this thread, You can share and discuss other links of new official stock firmware for the Galaxy Z Fold 3 International (NO CUSTOM ROMs and/or ROOT talk).
How to flash firmware to your phone:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Extract the firmware file (i.e. to folder C:\Odin) ***
2. Download Odin v3.14.4
3. Extract the Odin ZIP file (i.e. to folder C:\Odin)
4. Open Odin
5. Power OFF your Z Fold3
6. Reboot Phone in Download Mode: Hold down "Volume up" and "Volume down" at same time. While holding down, connect the your phone to your PC via USB. Or use the command "adb reboot-bootloader".
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
10. Click the start button, sit back and wait few minutes for the device to automatically restart.
*** You can find the latest firmware on Post #2
Latest firmware for the Galaxy Z Fold3
CHANGELOG:
• Stability and reliability
Device behavior has been improved.
• Security
The device is protected with improved security.
Click to expand...
Click to collapse
This is the latest ROM for Multi-CSC OXM and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is an official Samsung ROM so KNOX will not be triggered!
Model SM-F926B
Model name Galaxy Z Fold3
Country Multi-CSC OXM
Version Android 13
Changelist 26203421
Build date 2023-06-1
Security Patch Level 2023-06-01
Multi-CSC OXM
PDA F926BXXU4EWF1
CSC F926BOXM4EWF1
Details for download with Frija:
Unzip the archive and place the files in the designated slots in Odin 3.14.4
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset to factory settings
Multi-CSC Descriptions
The Asian model (XTC by default) of the Z Fold3 (SM-F926B) will get a Multi-CSC designated as OXM and that is the main focus of this particular thread but others can and will be discussed.
CountryProduct CodeMulti-CSCAfghanistan(AFG)OXMAlbania(AVF)OXMAustralia(XSA)OXMAustralia(OPS)OXMAustralia(TEL)OXMAustralia(VAU)OXMAustria(DRE)OXMAustria(MOB)OXMAustria(MAX)OXMAustria(ATO)OXMBaltic(SEB)OXMBulgaria(BGL)OXMCaucasus Countries(CAU)OXMChile(CHO)OXMCroatia(CRO)OXMCroatia(VIP)OXMCzech Republic(XEZ)OXMCzech Republic(O2C)OXMCzech Republic(TMZ)OXMCzech Republic(VDC)OXMEgypt(EGY)OXMFrance(XEF)OXMFrance(BOG)OXMFrance(FTM)OXMFrance(SFR)OXMGermany(DBT)OXMGermany(DTM)OXMGermany(VD2)OXMGreece(EUR)OXMGreece(COS)OXMGreece(VGR)OXMHungary(XEH)OXMHungary(TMH)OXMIndia(INU)OXMIraq(MID)OXMIreland(TSI)OXMIreland(MET)OXMIreland(3IE)OXMIreland(VDI)OXMIsrael(ILO)OXMItaly(ITV)OXMItaly(HUI)OXMItaly(TIM)OXMItaly(OMN)OXMKazakhstan(SKZ)OXMKenya(AFR)OXMKenya(DKR)OXMLebanon(ILP)OXMLibya(BTC)OXMLuxembourg(LUX)OXMMacedonia(MBM)OXMMalaysia(XME)OXMMorocco(MWD)OXMNepal(NPL)OXMNetherlands(PHN)OXMNetherlands(TNL)OXMNetherlands(VDF)OXMNigeria(ECT)OXMNordic countries(NEE)OXMPakistan(PAK)OXMPanama(TPA)OXMPhilippines(GLB)OXMPhilippines(XTC)OXMPoland(XEO)OXMPoland(OPV)OXMPoland(PLS)OXMPoland(PRT)OXMPoland(TPL)OXMPortugal(MEO)OXMPortugal(TPH)OXMPortugal(TCL)OXMRomania(ROM)OXMRomania(COA)OXMRomania(ORO)OXMRomania(CNX)OXMRussia(SER)OXMSaudi Arabia(KSA)OXMSaudi Arabia(ACR)OXMSerbia(MSR)OXMSerbia(TOP)OXMSingapore(MM1)OXMSingapore(XSP)OXMSingapore(SIN)OXMSingapore(STH)OXMSlovakia(ORX)OXMSlovakia(ORS)OXMSlovakia(TMS)OXMSlovenia(SIO)OXMSlovenia(MOT)OXMSlovenia(SIM)OXMSouth Africa(XFE)OXMSouth Africa(XFA)OXMSouth Africa(XFV)OXMSouth East Europe(SEE)OXMSpain(PHE)OXMSpain(XEC)OXMSpain(AMO)OXMSpain(ATL)OXMSri Lanka(SLK)OXMSweden(HTS)OXMSwitzerland(AUT)OXMSwitzerland(SWC)OXMThailand(THL)OXMThailand(MYM)OXMTrinidad and Tobago(EON)OXMTunisia(TUN)OXMTurkey(TUR)OXMUkraine(SEK)OXMUnited Arab Emirates(LYS)OXMUnited Arab Emirates(XSG)OXMUnited Kingdom(BTU)OXMUnited Kingdom(EVR)OXMUnited Kingdom(H3G)OXMUnited Kingdom(O2U)OXMUnited Kingdom(VOD)OXMUnknown(EUX)OXMUnknown(EUY)OXMUnknown(XNZ)OXMUzbekistan(CAC)OXMVietnam(XXV)OXM
These are the other Multi-CSC types available that may see new updates released at different times:
CountryProduct CodeMulti-CSCArgentina(ANC)OWEChile(CHE)OWECosta Rica(ICE)OWEDominican Republic(DOR)OWEJamaica(CWW)OWEUnknown(BAT)OWE
CountryProduct CodeMulti-CSCArgentina(ARO)OWOArgentina(CTI)OWOArgentina(UFN)OWOArgentina(PSN)OWOBolivia(BVO)OWOBrazil(ZTO)OWOBrazil(ZTA)OWOBrazil(ZTM)OWOBrazil(ZVV)OWOChile(CRC)OWOChile(CHL)OWOChile(CHT)OWOColombia(COL)OWOColombia(COO)OWOColombia(COM)OWOColombia(COB)OWODominican Republic(CDR)OWOEcuador(EBE)OWOEcuador(ECO)OWOGuatemala(PGU)OWOGuatemala(CGU)OWOMexico(IUS)OWOMexico(TMM)OWOMexico(TCE)OWOPanama(CPA)OWOParaguay(UPO)OWOParaguay(PSP)OWOParaguay(TGP)OWOPeru(PET)OWOPeru(PEO)OWOPeru(PNT)OWOPeru(SAM)OWOSouth America(NBS)OWOUnknown(BVT)OWOUnknown(MXO)OWOUruguay(UFU)OWOUruguay(CTU)OWO
Lastly, phones with these product codes do not currently share CSC with different countries:
CountryProduct CodeCSCIndonesia(XID)OLE
RESERVED #3
Very good
annson08 said:
Multi-CSC Descriptions
The Asian model (XTC by default) of the Z Fold3 (SM-F926B) will get a Multi-CSC designated as OXM and that is the main focus of this particular thread but others can and will be discussed.
CountryProduct CodeMulti-CSCAfghanistan(AFG)OXMAlbania(AVF)OXMAustralia(XSA)OXMAustralia(OPS)OXMAustralia(TEL)OXMAustralia(VAU)OXMAustria(DRE)OXMAustria(MOB)OXMAustria(MAX)OXMAustria(ATO)OXMBaltic(SEB)OXMBulgaria(BGL)OXMCaucasus Countries(CAU)OXMChile(CHO)OXMCroatia(CRO)OXMCroatia(VIP)OXMCzech Republic(XEZ)OXMCzech Republic(O2C)OXMCzech Republic(TMZ)OXMCzech Republic(VDC)OXMEgypt(EGY)OXMFrance(XEF)OXMFrance(BOG)OXMFrance(FTM)OXMFrance(SFR)OXMGermany(DBT)OXMGermany(DTM)OXMGermany(VD2)OXMGreece(EUR)OXMGreece(COS)OXMGreece(VGR)OXMHungary(XEH)OXMHungary(TMH)OXMIndia(INU)OXMIraq(MID)OXMIreland(TSI)OXMIreland(MET)OXMIreland(3IE)OXMIreland(VDI)OXMIsrael(ILO)OXMItaly(ITV)OXMItaly(HUI)OXMItaly(TIM)OXMItaly(OMN)OXMKazakhstan(SKZ)OXMKenya(AFR)OXMKenya(DKR)OXMLebanon(ILP)OXMLibya(BTC)OXMLuxembourg(LUX)OXMMacedonia(MBM)OXMMalaysia(XME)OXMMorocco(MWD)OXMNepal(NPL)OXMNetherlands(PHN)OXMNetherlands(TNL)OXMNetherlands(VDF)OXMNigeria(ECT)OXMNordic countries(NEE)OXMPakistan(PAK)OXMPanama(TPA)OXMPhilippines(GLB)OXMPhilippines(XTC)OXMPoland(XEO)OXMPoland(OPV)OXMPoland(PLS)OXMPoland(PRT)OXMPoland(TPL)OXMPortugal(MEO)OXMPortugal(TPH)OXMPortugal(TCL)OXMRomania(ROM)OXMRomania(COA)OXMRomania(ORO)OXMRomania(CNX)OXMRussia(SER)OXMSaudi Arabia(KSA)OXMSaudi Arabia(ACR)OXMSerbia(MSR)OXMSerbia(TOP)OXMSingapore(MM1)OXMSingapore(XSP)OXMSingapore(SIN)OXMSingapore(STH)OXMSlovakia(ORX)OXMSlovakia(ORS)OXMSlovakia(TMS)OXMSlovenia(SIO)OXMSlovenia(MOT)OXMSlovenia(SIM)OXMSouth Africa(XFE)OXMSouth Africa(XFA)OXMSouth Africa(XFV)OXMSouth East Europe(SEE)OXMSpain(PHE)OXMSpain(XEC)OXMSpain(AMO)OXMSpain(ATL)OXMSri Lanka(SLK)OXMSweden(HTS)OXMSwitzerland(AUT)OXMSwitzerland(SWC)OXMThailand(THL)OXMThailand(MYM)OXMTrinidad and Tobago(EON)OXMTunisia(TUN)OXMTurkey(TUR)OXMUkraine(SEK)OXMUnited Arab Emirates(LYS)OXMUnited Arab Emirates(XSG)OXMUnited Kingdom(BTU)OXMUnited Kingdom(EVR)OXMUnited Kingdom(H3G)OXMUnited Kingdom(O2U)OXMUnited Kingdom(VOD)OXMUnknown(XNZ)OXMUzbekistan(CAC)OXMVietnam(XXV)OXM
These are the other Multi-CSC types available that may see new updates released at different times:
CountryProduct CodeMulti-CSCArgentina(ANC)OWEChile(CHE)OWECosta Rica(ICE)OWEDominican Republic(DOR)OWEJamaica(CWW)OWEUnknown(BAT)OWE
CountryProduct CodeMulti-CSCArgentina(ARO)OWOArgentina(CTI)OWOArgentina(UFN)OWOArgentina(PSN)OWOBolivia(BVO)OWOBrazil(ZTO)OWOBrazil(ZTA)OWOBrazil(ZTM)OWOBrazil(ZVV)OWOChile(CRC)OWOChile(CHL)OWOChile(CHT)OWOColombia(COL)OWOColombia(COO)OWOColombia(COM)OWOColombia(COB)OWODominican Republic(CDR)OWOEcuador(EBE)OWOEcuador(ECO)OWOGuatemala(PGU)OWOGuatemala(CGU)OWOMexico(IUS)OWOMexico(TMM)OWOMexico(TCE)OWOPanama(CPA)OWOParaguay(UPO)OWOParaguay(PSP)OWOParaguay(TGP)OWOPeru(PET)OWOPeru(PEO)OWOPeru(PNT)OWOPeru(SAM)OWOSouth America(NBS)OWOUnknown(BVT)OWOUnknown(MXO)OWOUruguay(UFU)OWOUruguay(CTU)OWO
Lastly, phones with these product codes do not currently share CSC with different countries:
CountryProduct CodeCSCIndonesia(XID)OLE
Click to expand...
Click to collapse
The links lead to S21 Ultra Software, not Z Fold3
hkr said:
The links lead to S21 Ultra Software, not Z Fold3
Click to expand...
Click to collapse
Thanks, updating rn.
EDIT: Updated. Please note that not all countries has firmware for them YET so some links will return as "not found".
annson08 said:
In this thread, You can share and discuss other links of new official stock firmware for the Galaxy Z Fold 3 International (NO CUSTOM ROMs and/or ROOT talk).
How to flash firmware to your phone:
View attachment 5498513
1. Extract the firmware file (i.e. to folder C:\Odin) ***
2. Download Odin v3.14.4
3. Extract the Odin ZIP file (i.e. to folder C:\Odin)
4. Open Odin
5. Power OFF your Z Fold3
6. Reboot Phone in Download Mode: Hold down "Volume up" and "Volume down" at same time. While holding down, connect the your phone to your PC via USB. Or use the command "adb reboot-bootloader".
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
10. Click the start button, sit back and wait few minutes for the device to automatically restart.
*** You can find the latest firmware on Post #2
Click to expand...
Click to collapse
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?
annson08 said:
Multi-CSC Descriptions
The Asian model (XTC by default) of the Z Fold3 (SM-F926B) will get a Multi-CSC designated as OXM and that is the main focus of this particular thread but others can and will be discussed.
CountryProduct CodeMulti-CSCAfghanistan(AFG)OXMAlbania(AVF)OXMAustralia(XSA)OXMAustralia(OPS)OXMAustralia(TEL)OXMAustralia(VAU)OXMAustria(DRE)OXMAustria(MOB)OXMAustria(MAX)OXMAustria(ATO)OXMBaltic(SEB)OXMBulgaria(BGL)OXMCaucasus Countries(CAU)OXMChile(CHO)OXMCroatia(CRO)OXMCroatia(VIP)OXMCzech Republic(XEZ)OXMCzech Republic(O2C)OXMCzech Republic(TMZ)OXMCzech Republic(VDC)OXMEgypt(EGY)OXMFrance(XEF)OXMFrance(BOG)OXMFrance(FTM)OXMFrance(SFR)OXMGermany(DBT)OXMGermany(DTM)OXMGermany(VD2)OXMGreece(EUR)OXMGreece(COS)OXMGreece(VGR)OXMHungary(XEH)OXMHungary(TMH)OXMIndia(INU)OXMIraq(MID)OXMIreland(TSI)OXMIreland(MET)OXMIreland(3IE)OXMIreland(VDI)OXMIsrael(ILO)OXMItaly(ITV)OXMItaly(HUI)OXMItaly(TIM)OXMItaly(OMN)OXMKazakhstan(SKZ)OXMKenya(AFR)OXMKenya(DKR)OXMLebanon(ILP)OXMLibya(BTC)OXMLuxembourg(LUX)OXMMacedonia(MBM)OXMMalaysia(XME)OXMMorocco(MWD)OXMNepal(NPL)OXMNetherlands(PHN)OXMNetherlands(TNL)OXMNetherlands(VDF)OXMNigeria(ECT)OXMNordic countries(NEE)OXMPakistan(PAK)OXMPanama(TPA)OXMPhilippines(GLB)OXMPhilippines(XTC)OXMPoland(XEO)OXMPoland(OPV)OXMPoland(PLS)OXMPoland(PRT)OXMPoland(TPL)OXMPortugal(MEO)OXMPortugal(TPH)OXMPortugal(TCL)OXMRomania(ROM)OXMRomania(COA)OXMRomania(ORO)OXMRomania(CNX)OXMRussia(SER)OXMSaudi Arabia(KSA)OXMSaudi Arabia(ACR)OXMSerbia(MSR)OXMSerbia(TOP)OXMSingapore(MM1)OXMSingapore(XSP)OXMSingapore(SIN)OXMSingapore(STH)OXMSlovakia(ORX)OXMSlovakia(ORS)OXMSlovakia(TMS)OXMSlovenia(SIO)OXMSlovenia(MOT)OXMSlovenia(SIM)OXMSouth Africa(XFE)OXMSouth Africa(XFA)OXMSouth Africa(XFV)OXMSouth East Europe(SEE)OXMSpain(PHE)OXMSpain(XEC)OXMSpain(AMO)OXMSpain(ATL)OXMSri Lanka(SLK)OXMSweden(HTS)OXMSwitzerland(AUT)OXMSwitzerland(SWC)OXMThailand(THL)OXMThailand(MYM)OXMTrinidad and Tobago(EON)OXMTunisia(TUN)OXMTurkey(TUR)OXMUkraine(SEK)OXMUnited Arab Emirates(LYS)OXMUnited Arab Emirates(XSG)OXMUnited Kingdom(BTU)OXMUnited Kingdom(EVR)OXMUnited Kingdom(H3G)OXMUnited Kingdom(O2U)OXMUnited Kingdom(VOD)OXMUnknown(XNZ)OXMUzbekistan(CAC)OXMVietnam(XXV)OXM
These are the other Multi-CSC types available that may see new updates released at different times:
CountryProduct CodeMulti-CSCArgentina(ANC)OWEChile(CHE)OWECosta Rica(ICE)OWEDominican Republic(DOR)OWEJamaica(CWW)OWEUnknown(BAT)OWE
CountryProduct CodeMulti-CSCArgentina(ARO)OWOArgentina(CTI)OWOArgentina(UFN)OWOArgentina(PSN)OWOBolivia(BVO)OWOBrazil(ZTO)OWOBrazil(ZTA)OWOBrazil(ZTM)OWOBrazil(ZVV)OWOChile(CRC)OWOChile(CHL)OWOChile(CHT)OWOColombia(COL)OWOColombia(COO)OWOColombia(COM)OWOColombia(COB)OWODominican Republic(CDR)OWOEcuador(EBE)OWOEcuador(ECO)OWOGuatemala(PGU)OWOGuatemala(CGU)OWOMexico(IUS)OWOMexico(TMM)OWOMexico(TCE)OWOPanama(CPA)OWOParaguay(UPO)OWOParaguay(PSP)OWOParaguay(TGP)OWOPeru(PET)OWOPeru(PEO)OWOPeru(PNT)OWOPeru(SAM)OWOSouth America(NBS)OWOUnknown(BVT)OWOUnknown(MXO)OWOUruguay(UFU)OWOUruguay(CTU)OWO
Lastly, phones with these product codes do not currently share CSC with different countries:
CountryProduct CodeCSCIndonesia(XID)OLE
Click to expand...
Click to collapse
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?
annson08 said:
Latest firmware for the Galaxy Z Fold3
* The Next OTA Update changelog screenshot will be inserted here *
This is the latest ROM for Multi-CSC OXM and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is an official Samsung ROM so KNOX will not be triggered!
What's new:
* Next Update's changelog will be inserted here *
Model SM-F926B
Model name Galaxy Z Fold3
Country Multi-CSC OXM
Version Android 12
Changelist **
Build date **
Security Patch Level **
Multi-CSC OXM
PDA F926BXXS1BUL6
CSC F926BOXM1BUL5
Details for download with Frija:
View attachment 5498529
Unzip the archive and place the files in the designated slots in Odin 3.14.4
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset to factory settings
* Software Information Screenshot will be inserted here *
Click to expand...
Click to collapse
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?
shaifullah.ahad said:
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?
Click to expand...
Click to collapse
Sorry as you have asked three times the link has locked and you must try again tomorrow
I have EUX as product code. Will the firmware work?
/CK
Café King said:
I have EUX as product code. Will the firmware work?
/CK
Click to expand...
Click to collapse
yes, just choose HOME CSC.
shaifullah.ahad said:
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?
Click to expand...
Click to collapse
just use HOME CSC, doesn't matter if it's BKD, MSP, EUX, EUR or else.
As long as you have a SM-F926B model, not U model.
annson08 said:
Latest firmware for the Galaxy Z Fold3
* The Next OTA Update changelog screenshot will be inserted here *
This is the latest ROM for Multi-CSC OXM and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is an official Samsung ROM so KNOX will not be triggered!
What's new:
* Next Update's changelog will be inserted here *
Model SM-F926B
Model name Galaxy Z Fold3
Country Multi-CSC OXM
Version Android 12
Changelist **
Build date **
Security Patch Level **
Multi-CSC OXM
PDA F926BXXS1BUL6
CSC F926BOXM1BUL5
Details for download with Frija:
Unzip the archive and place the files in the designated slots in Odin 3.14.4
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset to factory settings
* Software Information Screenshot will be inserted here *
Click to expand...
Click to collapse
CSC : XID MSR and XSP are all the same, it gives in Friya some difference bul6 bul5 bul4 or bul 6 bul 4 bul4, but when installed, they are identical from decmeber 1th, with same baseband, build number and all.
I´ve the Fold 3 with DBT Eu Germany, can i flash the Build
SM-F926B_1_20211223115230_4zv7w7a7n9_fac
HOME_CSC_OXM_F926BOXM1BUL5 ?
I´m a little afraid
Gojira-r32 said:
CSC : XID MSR and XSP are all the same, it gives in Friya some difference bul6 bul5 bul4 or bul 6 bul 4 bul4, but when installed, they are identical from decmeber 1th, with same baseband, build number and all.
Click to expand...
Click to collapse
MSR and XSP are the same since they both belong in the same multi-CSC family. XID is different, don't get confused. PDA might be the same but contents may differ a little bit. To avoid getting bugs or errors, if you are going to flash firmware from a different multi-CSC, do not use HOME_CSC (this will result in a factory reset).
ShadowK10 said:
I´ve the Fold 3 with DBT Eu Germany, can i flash the Build
SM-F926B_1_20211223115230_4zv7w7a7n9_fac
HOME_CSC_OXM_F926BOXM1BUL5 ?
I´m a little afraid
Click to expand...
Click to collapse
Yes, as long as your current firmware and the new firmware you downloaded belongs to the same multi-CSC, you can use HOME_CSC.
i always use HOME csc
annson08 said:
MSR and XSP are the same since they both belong in the same multi-CSC family. XID is different, don't get confused. PDA might be the same but contents may differ a little bit. To avoid getting bugs or errors, if you are going to flash firmware from a different multi-CSC, do not use HOME_CSC (this will result in a factory reset).
Yes, as long as your current firmware and the new firmware you downloaded belongs to the same multi-CSC, you can use HOME_CSC.
Click to expand...
Click to collapse
Will this wipe the data on my phone？
fripSide-NY said:
Will this wipe the data on my phone？
Click to expand...
Click to collapse
That depends if you are flashing to a different multi-CSC.
If you are flashing to a different multi-CSC then you are required to use CSC instead of HOME_CSC. But if you're flashing to the same multi-CSC, then you just have to use HOME_CSC.
annson08 said:
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset to factory settings
Click to expand...
Click to collapse
Related
I9000AOJP4
OFFICIAL release
Version: 2.2 Froyo
PDA version I9000AOJP4
PDA Build time: 2010.10.26 14:55:45 KST
PDA Changelog: Unknown
MODEM version I9000AOJP3
MODEM Build time: 2010.10.27 11:32:47 KST
MODEM Platform: Infineon X-Gold 616
Carrier Specific: Yes (O2 Germany)
The rom is intended to be used with O2 Germany branded phones, but with different CSC it can be used anywhere in Europe.
The rom can be used with any of the CSCs listed below.
Swype languages supported by AOJP4:
Swype: Czech, Croatian, Dutch, English, French, German, Greek, Italian, Korean, Polish, Portuguese, Romanian, Slovak, Slovenian, Spanish.
------------------------
I9000BUJP8
OFFICIAL release
Version: 2.2 Froyo
PDA version I9000BUJP8
PDA Build time: 2010.11.10 10:21:44 KST
PDA Changelog: Unknown
MODEM version I9000BUJP5
MODEM Build time: 2010.10.27 13:22:35 KST
MODEM Platform: Infineon X-Gold 616
Carrier Specific: Yes (Vodafone)
The rom is intended to be used with Vodafone branded phones, but with different CSC it can be used anywhere in Europe.
The rom can be used with any of the CSCs listed below.
Swype languages supported by BUJP8:
Swype: Czech, Croatian, Dutch, English, French, German, Greek, Italian, Korean, Polish, Portuguese, Romanian, Slovak, Slovenian, Spanish.
------------------------
I9000JVJPF
OFFICIAL release
Version: 2.2 Froyo
PDA version I9000JVJPF
PDA Build time: 2010.11.02 19:27:57 KST
PDA Changelog: Unknown
MODEM version I9000JXJPD
MODEM Build time: 2010.10.26 19:35:03 KST
MODEM Platform: Infineon X-Gold 616
Carrier Specific: No
The rom can be used with any of the CSCs listed below.
Swype languages supported by BUJP8:
Swype: Dutch, English, French, German, Italian, Korean, Polish, Portuguese, Spanish, Turkish.
I have not modified the code in any way, although I have repacked the release to make CSC selection possible.
Usually Odin3 images are provided in a single integrated .tar package which contain all of the necessary files. This way the CSC cannot be selected separately.
That is why I splitted the release in three different parts (CODE, MODEM, CSC).
Since Odin3 has flashfile checksum support I also added md5 hash tail to the .tar files. This way is more secure because Odin will not allow flashing corrupted images. Flashing takes a bit longer thou because the checksums are checked in the beginning of the update process.
Note: The files are 7zip Self Extractors, double click to extract.
Download links:
GT-I9000_I9000AOJP4_I9000AOJP3_CODE-MODEM_OSP-MID
GT-I9000_I9000BUJP8_I9000BUJP5_CODE-MODEM_OSP-MID
GT-I9000_I9000JVJPF_I9000JXJPD_CODE-MODEM_OSP-MID
CSC_I9000NEEJP4 (Single CSC, Pcode "NEE")
CSC_I9000XEEJP4 (Single CSC, Pcode "XEE")
CSC_I9000XENJP2 (Single CSC, Pcode "XEN")
CSC_I9000OXAJPO (Multi CSC, Pcodes "CPW", "DBT", "KOR", "XEO", "XEU")
CSC_I9000OZSJPD (Multi CSC, Pcodes "BRI", "TGY")
CSC_I9000DBTJP3 (Single CSC, Pcode "DBT")
CSC_I9000ERAJP2 (Single CSC, Pcode "ERA")
CSC_I9000XEFJP3 (Single CSC, Pcode "XEF")
CSC_I9000TMNJP3 (Single CSC, Pcode "TMN")
CSC_I9000ITVJP3 (Single CSC, Pcode "ITV")
CSC_I9000GVODJP7 (Single CSC, Pcode "VOD")
CSC_I9000SERJP1 (Single CSC, Pcode "SER")
CSC_I9000OXXJP7 (Multi CSC, Pcodes "ATO", "AUT", "BSE", "CNX", "COA", "COS", "CRO", "CYO", "CYV", "EUR", "HAT", "IRD", "MET", "MOT", "MOZ", "MSR", "MTL", "O2C", "O2I", "ONE", "ORO", "ORS", "SEB", "SIM", "SMO", "SUN", "TMZ", "TOP", "TPH", "TRA", "TSR", "TWO", "VDH", "VDI", "VIM", "VIP", "VVT", "XEH", "XEO", "XEZ", "XFA", "XFC", "XFE", "XFM")
CSC_I9000O2UJP3 (Single CSC, Pcode "O2U")
CSC_I9000OJPJPF (Multi CSC, Pcodes "EGY", "JED", "KSA", "MAT", "MED", "MID", "MMC", "MWD", "PAK", "THR", "WAN", "XSG", "XSS")
CSC_I9000TWMJP6 (Single CSC, Pcode "TWM")
CSC_I9000OXFJP6 (Multi CSC, Pcodes "BHT", "CNX", "COA", "ERO", "HAT", "KOR", "MSR", "MTL", "ORO", "SIM", "SMO", "TMT", "TOP", "TRA", "TSR", "TWO", "VIM", "VIP", "VVT")
CSC_I9000VIAJP2 (Single CSC, Pcode "VIA")
CSC_I9000PROJP2 (Single CSC, Pcode "PRO")
CSC_I9000OLBJPA (Multi CSC, Pcodes "CCM", "DGI", "GLB", "MIS", "MM1", "SIN", "SMA", "STH", "THL", "UMB", "XEV", "XME", "XSE", "XSO", "XSP", "XTC", "XTE", "XXV")
CSC_I9000OJVJPC (MultiCSC, Pcodes "ABS", "AFR", "ARB", "FWD", "KEN", "OTU", "TMC", "TUN", "TUR")
How to check which CSC (major) version you should use:
Open dialer and type: *2767*4387264636#
The second line will read: PCode:GT-I9000HK?xxx.
Make the last three characters match with the CSC product code.
So how to proceed:
Put your phone to download mode (hold down: volume down, home key, power)
DO NOT plug in your phone yet, Odin / driver does not like it at this stage.
Start Odin3
Tick "Re-Partition", check that "Auto Reboot" and "F. Reset Time" have been ticked.
Click "PIT" button and select s1_odin_20100512.pit file.
Plug in the phone and wait until Odin finds it.
Click "Start" button... <Firmware update start...> <Get PIT for mapping...> appear. The phone will turn off and the screen indicates "Reset". Wait until Odin indicates "Pass".
Plug out your phone, remove the battery, put it back in and put phone to download mode again.
Click "Reset" button in Odin and untick "Re-Partition" box.
DO NOT select PIT file again.
Click "PDA" button and select "CODE_I9000xxJPx.tar.md5" file.
Click "MODEM" button and select "MODEM_I9000xxJPx.tar.md5" file.
Click "CSC" button and select the desired version "CSC_I9000???JP?.tar.md5".
Plug in the phone and wait until Odin finds it.
Click "Start" button and wait until phone reboots with the new software version.
When using a *Multi CSC* you need to select the CSC matching your product code (see above how to check). Open the dialer and type *#272*IMEI# (IMEI being... your 15 digit IMEI code )
Then select the desired CSC version from the list and press "Install".
The phone will reboot once the change is done.[/B]
The rom is a middle package as usual, so no bootloader included.
Regards.
- Nottingham
@richthofen...
Do you by any chance have a csc for vodafone operator for australia?
Sent from my GT-I9000
GREAT : Cooooooking
DocRambone said:
GREAT : Cooooooking
Click to expand...
Click to collapse
*drooling*
What are the chances that these firmwares differ a lot from the official XXJPO and XWJPA firmware ? Especially I9000BUJP8 , seems to be a lot newer . Don't get me wrong I think it's great all these releases are posted , I am just wondering if it would be worthwhile to flash one of these firmwares. ( I am on XWJPA official dutch rght now)
Please report back, im also going to try I9000BUJP8, or I9000JVJPF
flashing
http://www.samsunggalaxysforum.com/...000xfjp7-multicsc(s)-europe-flash-whith-odin/
here you have all csc
i will flash and say what diferences are and how all works
Quadrant Scores - I9000BUJP8
1 run: 921
2 run: 981
3 run: 1006 - woot!
- Now going to try with Super Optimized 4_2 kernel.
Dont know how you can get 2451 xD - im getting with this Firmware 2221 first run. With your lagfix options.
AHA, 2 run: 2377 quadrant. This is going great!! No Lag, Smooth, Testing battery now, running Super Optimized kernel 4_2.
no market on I9000JVJPF
there is no market app
give it 2 fact reset and also wipe everything and swype error force close
scufutz said:
there is no market app
give it 2 fact reset and also wipe everything and swype error force close
Click to expand...
Click to collapse
no market here too
Quadrant with I9000BUJP8 - 4_2 Super Optimized Kernel
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- EDIT: My marked work fine
i was just going to flash, but no market app? how is this possible?
BlueEyes99 said:
i was just going to flash, but no market app? how is this possible?
Click to expand...
Click to collapse
- My marked works fine. I got marked v 2.09
Thx you so much for all your work, Richthofen! Great job, i really appreciate all what you have done (and perhaps will do) for us!
So, Thank You!
I also have no market on JPF... Did a factory reset, still nothing.
aeo087 said:
I also have no market on JPF... Did a factory reset, still nothing.
Click to expand...
Click to collapse
- Go for I9000BUJP8
Great Job.
No problems so far with I9000BUJP8 and CSC_I9000OXXJP7 (EUR ) Greece
and with Super Optimized Kernel (4_2 STABLE) even better
Isn't JP8 meant for Vodafone?
I think its the same as JPA/JPO but modified for other country/carriers.
Since JPM/JP6 its very hard to get behind Samsungs naming.
Please give us battery report
Sent from my GT-I9000 using XDA App
In this thread, you can discuss and share the Mega links of new firmwares (OFFICIAL STOCK) for the Galaxy S10+
NO CUSTOM ROM's and/or ROOT-talk
How to flash the firmware to your phone:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download Odin v3.14.4
3. Extract the Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.14.4
5. Power OFF your S10+
6. Reboot Phone in Download Mode (1st plug-in USB-cable to your S10+!!!), push Bixby + Volume Down buttons, while pushing them plug-in USB-cable to PC. Or use the command "adb reboot-bootloader".
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
10. Click the start button, sit back and wait few minutes for the device to automatically restart.
*** You can always find the LATEST firmware in message #2
I have taken over these threads and they are dedicated to the memory of Henk, you can read more about him here:
RIP Henk, saying goodbye to our good friend and colleague
It's a sad day for all of us at SamMobile. One of the biggest Samsung fans is no longer among ...
www.sammobile.com
Latest firmware for the Galaxy S10+
This is the latest ROM for Multi-CSC OXM and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is an official Samsung ROM so KNOX will not be triggered!
(No changelog image available yet)
What's new:
* January security patches (Samsung Android Security Updates)
* The security of your device has been improved.
Model SM-G975F
Model name Galaxy S10+
Country Multi-CSC OXM
Version Android 12
Changelist 25257816
Build date Fri, 06 Jan 2023 07:46:08 +0000
Security Patch Level 2023-01-01
Multi-CSC OXM
PDA G975FXXSGHWA3
CSC G975FOXMGHWA3
Details for download with Frija:
Unzip the archive and place the files in the designated slots in Odin 3.14.4
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset to factory settings
Multi-CSC Descriptions
The European model of the S10+ (SM-G975F) will get a Multi-CSC designated as OXM and that is the main focus of this particular thread but others can and will be discussed.
CountryProduct CodeMulti-CSCAfghanistan AFGOXMAustralia XSAOXMAustralia OPSOXMAustralia TELOXMAustralia VAUOXMAustria ATOOXMBaltic SEBOXMBangladesh BNGOXMBulgaria BGLOXMCambodia CAMOXMCaucasus Countries CAUOXMChile CHOOXMColombia COOOXMCzech Republic XEZOXMEgypt EGYOXMFrance XEFOXMGermany DBTOXMGreece EUROXMHungary XEHOXMIndia INSOXMIran THROXMIraq MIDOXMIsrael ILOOXMItaly ITVOXMKazakhstan SKZOXMKenya AFROXMKenya DKROXMLibya BTCOXMLuxembourg LUXOXMMalaysia XMEOXMMorocco MWDOXMNepal NPLOXMNetherlands PHNOXMNew Zealand TNZOXMNew Zealand NZCOXMNew Zealand VNZOXMNigeria ECTOXMNordic countries NEEOXMPakistan PAKOXMPanama TPAOXMPeru PEOOXMPhilippines GLBOXMPhilippines XTCOXMPhilippines SMAOXMPoland XEOOXMPortugal TPHOXMRomania ROMOXMRussia SEROXMSaudi Arabia ACROXMSaudi Arabia KSAOXMSingapore MM1OXMSingapore XSPOXMSingapore SINOXMSingapore STHOXMSlovakia ORXOXMSlovenia SIOOXMSouth Africa XFEOXMSouth Africa XFAOXMSouth Africa XFVOXMSouth East Europe SEEOXMSpain PHEOXMSri Lanka SLKOXMSwitzerland AUTOXMTaiwan BRIOXMThailand THLOXMThailand MYMOXMTrinidad and Tobago EONOXMTunisia TUNOXMTurkey TUROXMUkraine SEKOXMUnited Arab Emirates XSGOXMUnited Arab Emirates LYSOXMUnited Kingdom BTUOXMUnited Kingdom / Ireland XEUOXMUnknown XNZOXMUnknown MXOOXMUnknown LAOOXMUnknown DOOOXMUzbekistan CACOXMVietnam XXVOXM
These are the other Multi-CSC types available that may see new updates released at different times:
CountryProduct CodeMulti-CSCAustria DRECKHIreland 3IECKHItaly HUICKHSweden HTSCKHUnited Kingdom H3GCKH
CountryProduct CodeMulti-CSCAustria MAXODXAustria TRGODXCroatia DHRODXCroatia CROODXCzech Republic TMZODXGermany DTMODXGreece COSODXHungary TMHODXMacedonia MBMODXNetherlands DNLODXNetherlands TNLODXPoland TPLODXRomania COAODXSlovakia TMSODX
CountryProduct CodeMulti-CSCFrance FTMOGCPoland OPVOGCRomania OROOGCSlovakia ORSOGCSpain AMOOGC
CountryProduct CodeMulti-CSCSpain XECOTFUnited Kingdom O2UOTF
CountryProduct CodeMulti-CSCAustria MOBOVFCroatia VIPOVFCyprus CYVOVFCzech Republic VDCOVFGermany VD2OVFGreece VGROVFItaly OMNOVFNetherlands VDFOVFPortugal TCLOVFRomania CNXOVFSlovenia SIMOVFSpain ATLOVFSwitzerland SWCOVFUnited Kingdom VODOVF
CountryProduct CodeMulti-CSCArgentina CTIOWABrazil ZTAOWAChile CRCOWAChile CHLOWAColombia COMOWADominican Republic CDROWAEcuador ECOOWAGuatemala PGUOWAMexico TCEOWAPanama CPAOWAPeru PETOWAPuerto Rico PCTOWAUruguay CTUOWA
CountryProduct CodeMulti-CSCArgentina PSNOWBBrazil ZTMOWBParaguay PSPOWB
CountryProduct CodeMulti-CSCMexico IUSOWCMexico UNEOWC
CountryProduct CodeMulti-CSCArgentina ANCOWEChile CHEOWEChile CHXOWECosta Rica ICEOWEDominican Republic DOROWEEcuador ALEOWEJamaica JDIOWEPanama PCWOWEPeru PNTOWEUnknown BATOWE
CountryProduct CodeMulti-CSCColombia COLOWMGuatemala CGUOWMParaguay TGPOWMUnknown BVTOWM
CountryProduct CodeMulti-CSCArgentina AROOWOBolivia BVOOWOBrazil ZTOOWOParaguay UPOOWO
CountryProduct CodeMulti-CSCArgentina UFNOWTBrazil ZVVOWTChile CHTOWTColombia COBOWTEcuador EBEOWTGuatemala TGUOWTMexico TMMOWTPanama PBSOWTPeru SAMOWTSouth America CRMOWTSouth America NBSOWTUruguay UFUOWT
CountryProduct CodeMulti-CSCFrance SFROXJPortugal MEOOXJ
Lastly, phones with these product codes do not currently share CSC with different countries:
CountryProduct CodeCSCBosnia and Herzegovina BHTBHTFrance BOGBOGItaly TIMIM4Slovenia MOTMOTSerbia MSRMSRCzech Republic O2CO2CUnited Kingdom EVROBEIndonesia XIDOLEPoland PLSPLSPoland PRTPRTSerbia TOPTOP
No Root , no Exposed ! , enjoying Note9 with Rooted Oreo & exposed installed .
henklbr said:
In this thread, You can share the Mega-Links of new firmware's (OFFICIAL STOCK) for the Galaxy Note9 (so: NO CUSTOM ROM's and/or ROOT-talk)...
How to flash firmware to your phone:
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download Odin v3.13.1
3. Extract Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.13.1
5. Power OFF Note9
6. Reboot Phone in Download Mode (1st plug-in USB-cable to your S10+!!!, push Bixby + Volume Down buttons, while pushing them plug-in USB-cable to PC
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots
9. Make sure re-partition is NOT ticked
10. Click the start button, sit back and wait few minutes
*** You can always find the LATEST firmware in msg #2
Click to expand...
Click to collapse
Nothing about the front camera led notifications?
@henklbr plz correct "Note 9" to Galaxy S10+ in the first msg .
Bofahad said:
No Root , no Exposed ! , enjoying Note9 with Rooted Oreo & exposed installed .
Click to expand...
Click to collapse
Actually, this thread is about S10+'s stock firmwares
iteam said:
Nothing about the front camera led notifications?
Click to expand...
Click to collapse
Nope,only time will tell.
Virgo_Guy said:
@henklbr plz correct "Note 9" to Galaxy S10+ in the first msg .
Click to expand...
Click to collapse
Done: thanks
Hi I am not able to boot into recovery mode or download mode. I am aware of three button method, I have been flashing ROMS since S6 Has anything changed?
rishab_s said:
Hi I am not able to boot into recovery mode or download mode. I am aware of three button method, I have been flashing ROMS since S6 Has anything changed?
Click to expand...
Click to collapse
Have you read msg #1?
Procedure download-mode can be found there...
Recovery: VolUP-Bixby-Power
Does Any One Have The Build.prop For the Galaxy S10 ?????
OFF-TOPIC!
serg2018 said:
Does Any One Have The Build.prop For the Galaxy S10 ?????
Click to expand...
Click to collapse
This has nothing to do with thread's subject...
"G975FXXU1ASBA" mirrors:
MEGA:
https://mega.nz/#!3apTwYAR!NQOEw6vusVROIMjiruLWJXNmrKp4I7BsEPTu3nwcn5Q
Androidfilehost:
https://www.androidfilehost.com/?fid=1395089523397910201
Could anyone that has downloaded this, may do me a favor of sharing the file checksum? I downloaded from somewhere else earlier, but wanna make sure is legit... Thanks!
henklbr said:
This ROM is the latest ROM for Multi-CSC OXM released 08 Mar 19, and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is official Samsung ROM, so KNOX won't be triggered!
What's new:
* OneUI Pie (Android 9)
* February security patches (Samsung Android Security Updates)
· The stability of Camera has been improved
· The performance of Fingerprint recognition has been improved
· Added feature to set the app or function which runs when the Bixby key is pressed
Model SM-G975F
Model name Galaxy S10+
Country Multi-CSC OXM
Version Android 9
Changelist 15445945
Build date Sun, 24 Feb 2019 04:49:44 +0000
Security Patch Level 2019-02-01
Multi-CSC OXM
PDA G975FXXU1ASBA
CSC G975FOXM1ASBA
Details for download with SamFirm:
UN-ZIP the archive and place the files in the designated slots in Odin 3.13.1
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will be resetted
SM-G975F OXM multi CSC ( ACR AFG AFR ATO AUT BGL BNG BRI CAC CAM CAU CHO COO DBT DKR ECT EGY EON EUR ILO INS ITV KSA LAO LUX MID MWD MXO MYM NEE NPL ORX PAK PEO PHE PHN ROM SEB SEE SEK SKZ SLK SMP THL THR TPA TPH TTT TUN TUR XEF XEH XEO XEU XEZ XFE XME XSG XSP XTC XXV )
single : ( BTC BTU CPW DOO EMP GLB GTO LYS MAT MM1 NZC OPS SER SIN SIO SMA STH TEB TEL TMC TNZ VAU VNZ WTL XFA XNZ XSA )
by default : DBT
Click to expand...
Click to collapse
Brazil ZTO CSC is not part of Multi-CSC OXM too? In Brazil the S10's versions will come with Exynos this time
cdneto said:
Brazil ZTO CSC is not part of Multi-CSC OXM too? In Brazil the S10's versions will come with Exynos this time
Click to expand...
Click to collapse
Nope: Brazil (ZTO) is part of Multi-CSC OWO
I have tried to flash with OWO CSC but doens´t work. My S10 came from another country and flashing with this OWO version (ZTO) it kept the previous configuration and Samsung Pay doens´t work. Then I downloaded a french one with OXM CSC and it´s not perfect as some services comes in French but Samsung Pay is working in Brazil. Hopefully they will release a OXM ZTO and then could work. With the OWO doens´t work. I´ve tried everything CSC only (wipe), with Home, etc....doens´t work
henklbr said:
The European model of the S10+ (SM-G975F) will get a Multi-CSC -> OXM
SM-G975F OXM multi CSC ( ACR AFG AFR ATO AUT BGL BNG BRI CAC CAM CAU CHO COO DBT DKR ECT EGY EON EUR ILO INS ITV KSA LAO LUX MID MWD MXO MYM NEE NPL ORX PAK PEO PHE PHN ROM SEB SEE SEK SKZ SLK SMP THL THR TPA TPH TTT TUN TUR XEF XEH XEO XEU XEZ XFE XME XSG XSP XTC XXV )
single : ( BTC BTU CPW DOO EMP GLB GTO LYS MAT MM1 NZC OPS SER SIN SIO SMA STH TEB TEL TMC TNZ VAU VNZ WTL XFA XNZ XSA )
by default : DBT
Click to expand...
Click to collapse
for SM-G975F OXM DBT is not the CSC by default
so if you are not able to extract CSC from firmware please respect forum rules
thanks
yakapa40 said:
for SM-G975F OXM DBT is not the CSC by default
so if you are not able to extract CSC from firmware please respect forum rules
thanks
Click to expand...
Click to collapse
1. I DO respect the rules of the forum
2. On this forum we do help eachother, not to react/correct someone in an "arrogant" way -> not amused (you could telling me also via DM, don't you agree?)
3. thank you for telling me the "correct default CSC".
i have no PM , where you ask me if you can post OXM multi CSC and for helping eachother , here in post11 :
https://forum.xda-developers.com/s1...pdate-odin-t3908710/post79091791#post79091791
Ok sorry if I am a bit junior on this but I have flashed other galaxy with ZTO (Brazil) and always worked well. It's the first time I downloaded the ZTO (OWO compilation) and doesn't work. If someone here can help or "teach" me how can I have Brazilian services changing the CSC to ZTO on OWO compilation posted on SAMMOBILE I do appreciate. For me the only working is OXM but still many services such as concierge in French.
Thanks
In this thread, You can share the Mega-Links of new firmware's (OFFICIAL STOCK) for the Galaxy Note10+ (so: NO CUSTOM ROM's and/or ROOT-talk)...
How to flash firmware to your phone:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download Odin v3.14.4
3. Extract Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.14.4
5. Power OFF your Note10+
6. Reboot Phone in Download Mode (1st plug-in USB-cable to your Note10+!!!), push Volume Up + Volume Down buttons, while pushing them plug-in USB-cable to PC
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots
9. Make sure re-partition is NOT ticked
10. Click the start button, sit back and wait few minutes
*** You can always find the LATEST firmware in msg #2
Latest Firmware Note10+
This ROM is the latest ROM for Multi-CSC OXM released 25 Feb 21, and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is official Samsung ROM, so KNOX won't be triggered!
What's new:
* March security patches (Samsung Android Security Updates)
* OneUI 3.1
* The security of your device has been improved
Model SM-N975F
Model name Galaxy Note10+
Country Multi-CSC OXM
Version Android 11
Changelist 21054212
Build date Thu, 18 Feb 2021 05:22:26 +0000
Security Patch Level 2021-03-01
Multi-CSC OXM
PDA N975FXXU6FUBD
CSC N975FOXM6FUBD
Details for download with Frija:
UN-ZIP the archive and place the files in the designated slots in Odin 3.14.4
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset
SM-N975F OXM multi-CSC:
ACR AFG AFR ATO AUT BGL BNG CAC CAM CAU CHO COO DBT DKR ECT EGY EON EUR GTO ILO INS ITV KSA LAO LUX MID MWD MXO MYM NEE NPL ORX PAK PEO PHE PHN ROM SEB SEE SEK SKZ SLK SMP THL TPH TTT TUN TUR XEF XEH XEO XEU XEZ XFE XME XSG XSP XTC XXV
BKD BTC BTU CPW GLB ILP LYS MM1 NZC OPS SER SIN SIO SMA STH TEL TNZ TPA VAU VNZ XFA XFV XNZ XSA
By default : AUT
Multi-CSC OXM
SM-N975F OXM multi-CSC:
ACR AFG AFR ATO AUT BGL BNG CAC CAM CAU CHO COO DBT DKR ECT EGY EON EUR GTO ILO INS ITV KSA LAO LUX MID MWD MXO MYM NEE NPL ORX PAK PEO PHE PHN ROM SEB SEE SEK SKZ SLK SMP THL TPH TTT TUN TUR XEF XEH XEO XEU XEZ XFE XME XSG XSP XTC XXV
BKD BTC BTU CPW GLB ILP LYS MM1 NZC OPS SER SIN SIO SMA STH TEL TNZ TPA VAU VNZ XFA XFV XNZ XSA
By default : AUT
N975FXXU1ASH5 (Multi-CSC OXM)
This ROM is the latest ROM for Multi-CSC OXM released 15 Aug 19, and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is official Samsung ROM, so KNOX won't be triggered!
What's new:
* August security patches (Samsung Android Security Updates)
* Initial Firmware
* Camera Firmware update
Model SM-N975F
Model name Galaxy Note10+
Country Multi-CSC OXM
Version Android 9
Changelist 16618471
Build date Fri, 09 Aug 2019 07:17:48 +0000
Security Patch Level 2019-08-01
Multi-CSC OXM
PDA N975FXXU1ASH5
CSC N975FOXM1ASH5
Details for download with Frija:
UN-ZIP the archive and place the files in the designated slots in Odin 3.13.3
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will be resetted
SM-N975F OXM multi-CSC:
ACR AFG AFR ARO ATO AUT BGL BNG BTC BTU CAC CAM CAU CHO COO CPW DBT DKR DOO ECT EGY EON EUR FWD GLB GTO ILO INS ITV KSA LAO LUX LYS MID MM1 MWD MXO MYM NEE NPL NZC OPS ORX PAK PEO PHE PHN ROM SEB SEE SEK SER SIN SIO SKZ SLK SMA SMP STH TEL THL TNZ TPA TPH TTT TUN TUR VAU VNZ XEF XEH XEO XEU XEZ XFA XFE XFV XME XFG XNZ XSA XSP XTC XXV
By default : XEF
Great, thanks for maintaining this on the other tread! All we need is @jaylence to obtain Note 10 and OTA flow to continue
Download "N975FXXU1ASH5" firmware:
AndroidFileHost
henklbr said:
In this thread, You can share the Mega-Links of new firmware's (OFFICIAL STOCK) for the Galaxy Note10+ (so: NO CUSTOM ROM's and/or ROOT-talk)...
How to flash firmware to your phone:
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download Odin v3.13.3
3. Extract Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.13.3
5. Power OFF your S10+
6. Reboot Phone in Download Mode (1st plug-in USB-cable to your Note10+!!!), push Volume Up + Volume Down buttons, while pushing them plug-in USB-cable to PC
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots
9. Make sure re-partition is NOT ticked
10. Click the start button, sit back and wait few minutes
*** You can always find the LATEST firmware in msg #2
Click to expand...
Click to collapse
Sir, in line 5 it reads as S10 +. Humble request to change to note 10 . Because it is causing confusion.
Off topic post removed by OP request.
Is there a root or not ??
No ROOT talk in this thread!
AboodySahhaf said:
Is there a root or not ??
Click to expand...
Click to collapse
Read message #1 first sentence...
Anyone have AT&T firmware I can flash to my unlocked note 10+ for wifi calling etc?
OFF-TOPIC!
jwbolfer said:
Anyone have AT&T firmware I can flash to my unlocked note 10+ for wifi calling etc?
Click to expand...
Click to collapse
Read the thread's subject:
This thread is about the "International SM-N975F" model of the Note10+, not the US-model...
Hello,
Just wanted to ask help here.. I just got my Note10+ here in PH and locked by my carrier Globe. Can i flash an openline firmware and will it trigger knox voiding my warranty? I have attached the screenshot of my phone software information. Appreciate your help which sofware I can download and flash via Odin. Thanks in advance!
SM-N975F/DS https://m.imgur.com/a/IofpGBQ
Got my N10 plus today and received the august update right away
Verstuurd vanaf mijn SM-N975F met Tapatalk
bh0n said:
Hello,
Just wanted to ask help here.. I just got my Note10+ here in PH and locked by my carrier Globe. Can i flash an openline firmware and will it trigger knox voiding my warranty? I have attached the screenshot of my phone software information. Appreciate your help which sofware I can download and flash via Odin. Thanks in advance!
SM-N975F/DS https://m.imgur.com/a/IofpGBQ
Click to expand...
Click to collapse
Your CSC won't change, because Globe and Open Line are both in Multi-CSC OXM
Any suggestions how can i make my unit openline? Badly need it. Thank you!
Would this work in Australia rom? XSA or TEL? Same model N975F.
Thank you
henklbr said:
Your CSC won't change, because Globe and Open Line are both in Multi-CSC OXM
Click to expand...
Click to collapse
So there would be no other way to change the CSC and possible to open line our unit? Or we can flash a different region that is not in the Multi-CSC?
henklbr said:
Your CSC won't change, because Globe and Open Line are both in Multi-CSC OXM
Click to expand...
Click to collapse
I would also like to know the right way to change the CSC. Currently on ASH5 rom with XSA CSC. Would like to swap to THL. I have a thailand sim card but the normal method of reset with sim card inserted didn't work like it worked for my Note8
rexii2323 said:
I would also like to know the right way to change the CSC. Currently on ASH5 rom with XSA CSC. Would like to swap to THL. I have a thailand sim card but the normal method of reset with sim card inserted didn't work like it worked for my Note8
Click to expand...
Click to collapse
Could you go to Software Info on your device, scroll down to "Software Serviceprovider" and post that info here (screenshot)...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This thread is for the INTERNATIONAL Note10+, SM-N975F, only!!!
Continuously "asking" "where's the UPDATE.ZIP" is NOT DONE!
Be aware, it's NOT very easy to pull the UPDATE.ZIP, and is done by persons in their free time! ( i.e. Cyber John )
If you "can't wait" for the UPDATE.ZIP, pull it yourself and post it here!
Samsung is starting a Beta-program Android 10/OneUI 2 for the Note10-series. In this thread, we'll post the UPDATE.ZIP files (when available).
REMEMBER: don't install these files if you want to have a STABLE phone! As this is a BETA, it's possible the firmware isn't BUG-free!
The UPDATE.ZIP files are pulled from a GERMAN (DBT)-device; be sure your device is on the N975FXXU1ASJ2 build! (Radio/CP & CSC must be on: ASIC (Radio/CP) & ASJ2 (CSC))
The UPDATE.ZIP can be installed on devices with the following CSC's:
SM-N975F OXM multi-CSC:
ACR AFG AFR ARO ATO AUT BGL BNG BTC BTU CAC CAM CAU CHO COO CPW DBT DKR DOO ECT EGY EON EUR FWD GLB GTO ILO INS ITV KSA LAO LUX LYS MID MM1 MWD MXO MYM NEE NPL NZC OPS ORX PAK PEO PHE PHN ROM SEB SEE SEK SER SIN SIO SKZ SLK SMA SMP STH TEL THL TNZ TPA TPH TTT TUN TUR VAU VNZ XEF XEH XEO XEU XEZ XFA XFE XFV XME XFG XNZ XSA XSP XTC XXV
How to install the UPDATE.ZIP to your Note10+ (by @madvinegar ); YouTube-video by SStech
ADB-method:
1. Download SDK platform tools from here https://developer.android.com/studio/releases/platform-tools
2. Extract them on your desktop.
3. Inside the extracted folder put the update.zip
4. Inside this folder, holding left shift, right click the mouse and select "open command prompt here". The command prompt will open.
5. Shutdown the phone.
6. Holding power+bixby+volume up buttons, enter into recovery mode.
7. Select "update via ADB". (you scroll down using the volume buttons and select using the power button).
8. Connect the phone to the PC using original samsung USB cable.
9. In the command prompt run the following command:
./adb devices
10. Wait to see that the daemon has started and that your device is found.
11. If you device is found, run the following command:
./adb sideload update.zip
The update process will start. You will see a percentage counting. First it will verify, then patch etc. Do not move the cable, disconnect the phone or power off the PC.
Once the process is completed (it takes some time) the phone will boot itself, update the apps and log into your home screen.
SD-card method:
1. Download the bin file and rename it to update.zip (by going to file options in win10 you can select to view the file extensions. This makes the renaming process much easier and safer, and avoids renaming the file to update.zip.zip)
2. Copy it to the root directory of your SDcard.
3. Shut down your phone.
4. Hold simultaneously Power+bixby+volume up buttons to get into stock recovery.
5. Using your volume keys navigate to "update via SdCard" and press power button to select it.
6. Again using volume keys navigate to the file "update.zip" and press power button to select it.
7. Update will start. Leave it till it completes. It will take some time.
8. Phone will reboot by itself and load android.
This will not trip KNOX if done by the method i told
NOTE: THESE UPDATE.ZIP's ARE ONLY FOR DEVICES WITH MULTI-CSC OXM!!!
You can check this, to type in your dialer *#1234#, and check if OXM is in the CSC-build...
Note10+:
Beta1 (28 Oct) ASJ2 -> ZSJF : N975F_ASJ2_ZSJF
You need to be at this build: AP : N975FXXS1ASJ2 - CP : N975FXXS1ASIC - CSC : N975FOXM1ASJ2
Beta1 (08 Nov) ASJG -> ZSK4 : N975F_ASJG_ZSK4 (thanks to @dr.ketan)
You need to be at this build: AP : N975FXXS1ASJG - CP : N975FXXS1ASJ2 - CSC : N975FOXM1ASJ2
Beta1 (14 Nov) ASJM -> ZSK4 : N975F_ASJM_ZSK4 (thanks to SamMobile)
You need to be at this build: AP : N975FXXS1ASJM - CP : N975FXXS1ASJ4 - CSC : N975FOXM1ASJC
Beta2 (18 Nov) ZSK4 -> ZSK8 : N975F_ZSK4_ZSK8 (thanks to @dr.ketan)
Beta2 (18 Nov) ZSJF -> ZSK8 : N975F_ZSJF_ZSK8 INSTALL VIA SD-CARD METHOD!
Beta3 (29 Nov) ZSK8 -> ZSKN : N975F_ZSK8_ZSKN (Thanks to GalaxyClub)
Beta4 (06 Dec) ZSKN -> ZSL4 : N975F_ZSKN_ZSL4 (Thanks to GalaxyClub)
Beta5 (11 Dec) ZSL4 -> ZSL7 : N975F_ZSL4_ZSL7 (Thanks to SamMobile)
Stable (13 Dec) ZSL7 -> BSL7 : N975F_ZSL7_BSL7 (Thanks to Cyber John )
Note10:
Beta1 (28 Oct) ASJ2 -> ZSJF : N970F_ASJ2_ZSJF
Beta2 (18 Nov) ZSJF -> ZSK8 : N970F_ZSJF_ZSK8 INSTALL VIA SD-CARD METHOD!
Beta3 (29 Nov) ZSK8 -> ZSKN : N970F_ZSJ8_ZSKN (Thanks to SamMobile)
Beta4 (06 Dec) ZSKN -> ZSL4 : N970F_ZSKN_ZSL4 (Thanks to SamMobile)
Beta5 (11 Dec) ZSL4 -> ZSL7 : N970F_ZSL4_ZSL7 (Thanks to Cyber John )
Stable (13 Dec) ZSL7 -> BSL7 : N970F_ZSL7_BSL7 (Thanks to Cyber John )
RENAME THE FILE TO update.zip
NOTE: after installing the update, CLEAR your cache by going into recovery (VolUP - Power)
If you want to run the BETA-firmware flawlessly, do a FACTORY-reset afterwards... (not necessary, but... )
UPDATING to Beta is your own choice, and I don't take responsibility if something is going wrong!
If you're NOT officially registered, you WON'T receive OTA: you'll have to update everytime MANUALLY with above method!!!
If you want to DOWNGRADE back to Pie: download the latest Pie-firmware for your own CSC, flash AP BL CP & CSC_OXM -> your device will reset afterwards which is mandatory!
In previous BETA releases being able to connect devices such as your watch has been very hit and miss.
There was a thread somewhere about Android 10 and it not connecting to the Active 2 watch. Just something to keep in mind if you are considering updating to the BETA and have such devices
Note 10 android beta delayed until 24.10, maybe.
"SAMSUNG LIVE CHAT <SAMSUNG LIVE CHAT
MICHAELA YORKS / CHATE ID: 22459678 MICHAELA YORKS / CHATE ID: 22459678
have lost.
14:23
Welcome! small
Wait a minute, it's about to go Los_13: 21 For the Note10 / Note10 + will be the
Beta program expected from
Good day Marcel Racky. My name the 24.10. be empowered. 14:23
1st Michaela Yorks. I like to help
welter! 14:21 Um, let's just say it
on 21.10
14'24, 7
So hello again, here I am
was just kicked c looks like
that now off with the rest of the information When does the rollout start?
to the beta program for note 10 at German time?
and the 10 plus comes the 14:24
tomorrow? if so when does it start?
rollout ?? Because I suspect that belongs to the more up-to-date information
the start is delayed as it stands at 24.10.
the s10 series 14:24
14:22
For this we are not current
It's us Marcel. Unfortunately, information had before ..
we have a connection error, 14:24
We also turn our customers
have lost. Okay, good to know that's too bad
14:23 again delayed"
megatooth said:
Note 10 android beta delayed until 24.10, maybe.
"SAMSUNG LIVE CHAT <SAMSUNG LIVE CHAT
MICHAELA YORKS / CHATE ID: 22459678 MICHAELA YORKS / CHATE ID: 22459678
have lost.
14:23
Welcome! small
Wait a minute, it's about to go Los_13: 21 For the Note10 / Note10 + will be the
Beta program expected from
Good day Marcel Racky. My name the 24.10. be empowered. 14:23
1st Michaela Yorks. I like to help
welter! 14:21 Um, let's just say it
on 21.10
14'24, 7
So hello again, here I am
was just kicked c looks like
that now off with the rest of the information When does the rollout start?
to the beta program for note 10 at German time?
and the 10 plus comes the 14:24
tomorrow? if so when does it start?
rollout ?? Because I suspect that belongs to the more up-to-date information
the start is delayed as it stands at 24.10.
the s10 series 14:24
14:22
For this we are not current
It's us Marcel. Unfortunately, information had before ..
we have a connection error, 14:24
We also turn our customers
have lost. Okay, good to know that's too bad
14:23 again delayed"
Click to expand...
Click to collapse
Yes: was mentioned in my 1st post (1st line)
Wonder if it's to do with the whole fingerprint with screen protector issue that's going on at the minute. Maybe they want to get that in the beta and that's why it's delayed.
Wouldn't flashing the update.zip file directly via the recovery menu work? nor not trip knox? When pie beta was released last year for the note9, flashing the update file directly worked. I remember I was at the airport that time and just couldn't wait to get home to flash it so I did everything there with only a charging port available around.
Sent from my SM-N975F using Tapatalk
annson08 said:
Wouldn't flashing the update.zip file directly via the recovery menu work? nor not trip knox? When pie beta was released last year for the note9, flashing the update file directly worked. I remember I was at the airport that time and just couldn't wait to get home to flash it so I did everything there with only a charging port available around.
Sent from my SM-N975F using Tapatalk
Click to expand...
Click to collapse
We had to flush update.zip via adb on s10 last week.
Anyway, old news, my new n10 is coming Thursday on potential beta day too lol
henklbr said:
6. Holding power+volume up buttons, enter into recovery mode.
Click to expand...
Click to collapse
Note 10 Plus has no Power Button, Probably the Bixby button is meant?
6. Odin v3.13.3 must be on ,connect cable (original) to your phone then holding VOLUME DOWN + VOLUME UP than connect cable in PC USB = enter into recovery mode.
woodchild said:
Note 10 Plus has no Power Button, Probably the Bixby button is meant?
Click to expand...
Click to collapse
How do you Power-ON your Note10 when it's OFF?
megatooth said:
6. Odin v3.13.3 must be on ,connect cable (original) to your phone then holding VOLUME DOWN + VOLUME UP than connect cable in PC USB = enter into recovery mode.
Click to expand...
Click to collapse
You're saying? ? ?
You DON'T go to "recovery mode" when you're doing this (you'll enter in ODIN-mode!)
More specific: odin on, phone off, attach cable to phone, push VOLUME UP + VOLUME DOWN same time, attach cable to usb pc . Voilà!
megatooth said:
More specific: odin on, phone off, attach cable to phone, push VOLUME UP + VOLUME DOWN same time, attach cable to usb pc . Voilà!
Click to expand...
Click to collapse
"My" method is much easier, don't you agree?
henklbr said:
How do you Power-ON your Note10 when it's OFF?
Click to expand...
Click to collapse
Yes, that´s right No Power off Button but Bixby Button is Power On button if device off My Mistake
henklbr said:
"My" method is much easier, don't you agree?
Click to expand...
Click to collapse
Yes. It is. Because "my method" is for flash with odin
Another mistake
megatooth said:
Yes. It is. Because "my method" is for flash with odin
Another mistake
Click to expand...
Click to collapse
"My" method can also be used to flash with Odin:
Choose: Boot to Bootloader
And "what" do you mean with "Another mistake"?
henklbr said:
And "what" do you mean with "Another mistake"?
Click to expand...
Click to collapse
I think he means that in relation to my post # 14. I wrote "My mistake"
henklbr said:
And "what" do you mean with "Another mistake"?
Click to expand...
Click to collapse
My mistake !
NOTICE
When, I say WHEN, the BETA is released today, keep following in mind:
Continuously "asking" "where's the UPDATE.ZIP" is NOT DONE!
Be aware, it's NOT very easy to pull the UPDATE.ZIP, and is done by persons in their free time! ( i.e. Cyber John )
Read message #1: all instructions are there!
Not complying with above results in reporting to the Mod's!
Keep this thread CLEAN!!!
three uk devices are sold unlocked apparently, does this mean i dont need to play around with the csc to get the beta to bite??
Hello everyone! I made a tutorial regarding flashing the latest update when not available in your region:
Video tutorial:
Spoiler: Video
Steps:
1. Download and extract both Frija and Odin.
2. Launch Frija.
3. Check the "Auto" button. Write your device's Model Number and CSC
(Your model number is at Settings, then About phone).
4. Click on "Check Update".
5. Click on "Download" and choose a folder to save the firmware.
6. After the download is complete, extract the firmware .zip.
7. Launch Odin.
8. Click the "BL" button and select the file that starts with "BL_...".
9. Click the "AP" button and select the file that starts with "AP_...".
10. Click the "CP" button and select the file that starts with "CP_...".
11. Click the "CSC" button and select the file that starts with "HOME_CSC_..." (Selecting CSC_... will wipe your data!).
12. Turn off your phone.
13. Boot into Download Mode by holding both Volume Up + Volume Down buttons and then connecting it to your PC.
14. After booting into Download Mode, press the Volume Up button to continue.
15. Back to Odin, click "Start".
16. The flashing process will be over when "PASS" is shown in Odin and your phone reboots. You may close Odin and disconnect the phone from your PC then.
17. Congrats! You have successfully flashed the latest update to your device.
18. After your phone is on, turn it off again.
19. Boot into Recovery Mode by connecting to your PC and holding Volume Up + Power Button (+ Bixby Button).
20. Navigating with the Volume Buttons and selecting with the Power Button, go to "Wipe cache partition".
21. Select "Yes".
22. Select "Reboot system now".
Links:
Odin 3 by Samsung:
Index of /samsung-tools/
Frija by invmini:
[Tool] Frija - Samsung firmware downloader/checker
* * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
CSCs Cheat Sheet:
List of Samsung Galaxy CSC Country Specific Product code and region they belong to
List of CSC Country Specific code for Samsung Galaxy & various countries, regions, network carriers, model numbers, variants phone belong to.
www.androidsage.com
I hope it helps you!
Can I patch Magisk on the AP file before doing this and have it work? Can anyone confirm?
its hard to speak of Frija without also mentioning SamFirm. Its an equally effective tool to obtain firmware. I was unaware that FW was available for this device already. Good news for the modding community
can I flash BTU SM-G781B on XSG SM-G781B with Odin? will I lose any functionality? will I get regular BTU ota updates?
kk12002 said:
can I flash BTU SM-G781B on XSG SM-G781B with Odin? will I lose any functionality? will I get regular BTU ota updates?
Click to expand...
Click to collapse
You may flash it and no functionality will be lost. However, you will still be getting XSG updates in the future.
If you wish to change the CSC too and haven't updated to the January 2021 patch yet, please check my other tutorial:
[GUIDE] Change your CSC on any Samsung Galaxy devices running Android 10 or older - will also work in Android 11 for builds older than January 2021
Hello everyone! I made this video tutorial regarding changing the CSC on your Samsung Galaxy device. This method will work for Android 10 and older, and Android 11 (builds older than January 2021). Credits to...
forum.xda-developers.com
BredzProh said:
You may flash it and no functionality will be lost. However, you will still be getting XSG updates in the future.
If you wish to change the CSC too and haven't updated to the January 2021 patch yet, please check my other tutorial:
[GUIDE] Change your CSC on any Samsung Galaxy devices running Android 10 or older - will also work in Android 11 for builds older than January 2021
Hello everyone! I made this video tutorial regarding changing the CSC on your Samsung Galaxy device. This method will work for Android 10 and older, and Android 11 (builds older than January 2021). Credits to...
forum.xda-developers.com
Click to expand...
Click to collapse
thanks for the info. so the basic CSC is hard coded and cannot be changed or is there a way to get BTU otas? I'm only doing this to get the latest ota asap.
also would u recommend DBT or BTU.. are both multi CSC? I Thanks again
kk12002 said:
thanks for the info. so the basic CSC is hard coded and cannot be changed or is there a way to get BTU otas? I'm only doing this to get the latest ota asap.
also would u recommend DBT or BTU.. are both multi CSC? I Thanks again
Click to expand...
Click to collapse
Yes you are doing it right. If you want to get the latest OTA manually, you flash it every time, having XSG.
If you want to always be the first to get the latest OTA, I would suggest DBT.
DBT and BTU are the same regarding updates, but there are a lot of cases when DBT is the first to get them.
2 questions
1 Will this trip knox?
2 will I receive updates as normal?
Does flashing with odin loses waranty in any way? Im from israel and people here says that any touches other then getting ota manualy and update loses waranty to the device…
Thanks it worked for me
bmakk2055 said:
2 questions
1 Will this trip knox?
2 will I receive updates as normal?
Click to expand...
Click to collapse
Hello!
1- No, it will not. Knox will be tripped only if you root your device.
2. Yes!
galza said:
Does flashing with odin loses waranty in any way? Im from israel and people here says that any touches other then getting ota manualy and update loses waranty to the device…
Click to expand...
Click to collapse
No, you will not lose your warranty!
Warranty is lost only if you install a custom (unoffical) ROM or by rooting your devide.
BredzProh said:
Hello!
1- No, it will not. Knox will be tripped only if you root your device.
2. Yes!
Click to expand...
Click to collapse
Ok thanks
I managed to upgrade my SM-G781W model using this method, but I cannot downgrade. Is this normal?
kbytes said:
I managed to upgrade my SM-G781W model using this method, but I cannot downgrade. Is this normal?
Click to expand...
Click to collapse
sadly yes, Samsung made downgrading impossible after 3.1
Ayuda por favor Creo que destruí mi teléfono celular. La actualización de Odin falló y la pantalla dice que se ha producido un error al actualizar el software del dispositivo.
AlexSomozus said:
Ayuda por favor Creo que destruí mi teléfono celular. La actualización de Odin falló y la pantalla dice que se ha producido un error al actualizar el software del dispositivo.
Click to expand...
Click to collapse
you might have flashed the wrong version/kind for your phone.
Make sure you have the correct version. is it unlocked? is it an actual international?
we need more information to help you at all.
I keep getting error "Re-Partition operation failed". I don't have the repartition option ticked. I'm trying to flash SM-G781U1 to replace G781U. Advice?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have a bricked SD/SIM slot after an OTA update, can I flash the firmware via ODIN and retain all data on the phone?
Alright, did this 2 weeks ago when I reverted to stock ROM. this time I used sammobile to download the firmware (firmware version ILO - As it was on original bootloader). Fortunately, it worked and after relocking the bootloader, about 95% of the features came back to work, this includes:
* Play Certificate
* OTA Updates
* Most of Samsung features including some Knox protected features working fine again
* CSC features including call recording work fine
* Banking apps including wallet work fine again
* Galaxy wearable, private share, fine my device worked fine no matter the tripped knox.
The only issues were on some more knox resicted apps such Samsung health, samsung pass, secure folder. but anyways I don't use them mainly so I don't really care about losing them and I can always find alternatives for them, Google apps are excellent choice. I won't throw away my device just because those tiny amount of apps won't work. As long my phone is fine I'm happy.
Would consider to keep the device with stock ROM unless newer custom ROM of android 14 comes (and a one that is actually for daily use lol)