Related
Ok, I've just upgraded to windows 7. I was pretty psyched about the whole thing, and my computer seems like a whole new machine, coming from XP 32 bit.
So one thing I'm attempting to get adb to work with my phone. Heres my first problem - right off the bat, my computer doesnt recognize my phone as anything but an unknown device. YES I'VE TRIED DEBUGGING, DISK DRIVE, ETC., but nothing works.
I go to device manager, all I see is unknown device. Ok fine. I download the adb files that allow you to download the Android 2.1 thing and usb drivers. Still nothing works. I go to device manager, try to update the drivers for said "unkown device" and i get a message "the drivers are the newest up to date" or something. I try downloading the 64-bit HTC Hero drivers, same thing. I download and install HTC Sync, same thing.
I get this message when I plug the phone in...
"USB Device not recognized
One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message"
So my question is, how do i get my computer to recognize my phone, even as storage device??
jasongthang said:
Ok, I've just upgraded to windows 7. I was pretty psyched about the whole thing, and my computer seems like a whole new machine, coming from XP 32 bit.
So one thing I'm attempting to get adb to work with my phone. Heres my first problem - right off the bat, my computer doesnt recognize my phone as anything but an unknown device. YES I'VE TRIED DEBUGGING, DISK DRIVE, ETC., but nothing works.
I go to device manager, all I see is unknown device. Ok fine. I download the adb files that allow you to download the Android 2.1 thing and usb drivers. Still nothing works. I go to device manager, try to update the drivers for said "unkown device" and i get a message "the drivers are the newest up to date" or something. I try downloading the 64-bit HTC Hero drivers, same thing. I download and install HTC Sync, same thing.
I get this message when I plug the phone in...
"USB Device not recognized
One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message"
So my question is, how do i get my computer to recognize my phone, even as storage device??
Click to expand...
Click to collapse
try uninstalling htc sync and using a different usb port. does that work?
And to address how to get it to recognize as a drive, when you plug it in you should be presented with options where you can make it a disk drive. Or pull down your notification bar and change the type.
elegantai said:
And to address how to get it to recognize as a drive, when you plug it in you should be presented with options where you can make it a disk drive. Or pull down your notification bar and change the type.
Click to expand...
Click to collapse
On the phone yes, I can select a different type. On my computer, I just get that unknown device message.
And out of the blue I just tried a different USB port, and now it works as a storage device.
Did you restart the computer after installing the drivers? Sometimes mine gets a little goofy like that.
jasongthang said:
On the phone yes, I can select a different type. On my computer, I just get that unknown device message.
And out of the blue I just tried a different USB port, and now it works as a storage device.
Click to expand...
Click to collapse
i had that issue with one of my usb ports too. i think sometimes a bank of usb ports are used as basically a usb hub, and the evo doesn't like that, from what i understand.
Reboot comp, reboot EVO. Connect 'em, and then go into Device Manager, uninstall the "unknown device" (EVO), and then have it scan for new devices. Now, when it says scanning for drivers (or something to that effect) look for an advanced or "skip checking Windows Update for drivers" option. Then navigate to the ADB drivers in the Android SDK and tell it to use those. Make sure you have USB Debugging turned on, and EVO's set for "Charging Only".
If that still doesn't work, then there's an incompatibility with your computer's USB controller and Win7.
drmacinyasha said:
Reboot comp, reboot EVO. Connect 'em, and then go into Device Manager, uninstall the "unknown device" (EVO), and then have it scan for new devices. Now, when it says scanning for drivers (or something to that effect) look for an advanced or "skip checking Windows Update for drivers" option. Then navigate to the ADB drivers in the Android SDK and tell it to use those. Make sure you have USB Debugging turned on, and EVO's set for "Charging Only".
If that still doesn't work, then there's an incompatibility with your computer's USB controller and Win7.
Click to expand...
Click to collapse
lol, I did all that a few times, but im sure its not an incompatibility issue. probably just a skipped step somewhere.
jasongthang said:
lol, I did all that a few times, but im sure its not an incompatibility issue. probably just a skipped step somewhere.
Click to expand...
Click to collapse
If your computer is old enough, incompatibility is a possibility. See if there's other ports you can use, like on a different side of the case. Also, what brand computer?
--Swyped from my EVO using XDA App.
drmacinyasha said:
If your computer is old enough, incompatibility is a possibility. See if there's other ports you can use, like on a different side of the case. Also, what brand computer?
--Swyped from my EVO using XDA App.
Click to expand...
Click to collapse
stop! lol its fine. it works. i guess i should have stated that i've been on these forums for quite a while, and have flashed and rooted a few different phones using this computer, but with xp.
i just switched to windows 7, and of course lost all my drivers, and everything I had saved would have to be switched to 64-bit. I just couldnt get anything to work, but it seems to work now.
and I dont know what brand necessarily this computer is. i built it. I do have a dell keyboard though.
Shows up on my laptop but not on my desktop, have tried back and front USB ports
have uninstalled USB drivers, reinstalled USB drivers (universal adbdriversetup6 downloaded from xda sources)
downloaded android SDK manager and installed whatever USB stuff it had there
used USBdeview to remove any nexus 7 related things and then re-install USB drivers
Cannot for the life of me figure out what's going on... can anyone help me please
When I plug it in my desktop it makes the sound like something got connected... even has the safely remove hardware thing with nexus 7 there, but nothing in my computer
also have tried with/without USB debugging
tried removing my rom and flashing stock etc
Nothing has worked so far
and yes forgot to put in the title but this is for the Nexus 7FHD 2013
Is there a chance you are using usb3.0 port and can switch to usb2.0?
I would suggest you backup, flash stock, and redo your driver deinstall/install on stock. Try to get it working there first. Make sure USB debugging is disable on stock.
sfhub said:
Is there a chance you are using usb3.0 port and can switch to usb2.0?
I would suggest you backup, flash stock, and redo your driver deinstall/install on stock. Try to get it working there first. Make sure USB debugging is disable on stock.
Click to expand...
Click to collapse
tried USB 3.0 as well as 2.0 on desktop doesnt work, shows up as a device on safely remove hardware, and I can also see it under other devices in hardware manager or whatever but doesnt display in computer
USB debugging enabled or disabled on stock doesn't work.. tried going back to stock and doing driver installation etc as well
In device manager are there any unknown devices?
Did you remember to
Originally Posted by Geodude074 View Post
When you uninstall the driver, make sure you check the option to DELETE the driver as well. Otherwise when you try to reinstall it, it will just reinstall the old driver again
Driver instal with WinXP
I went around with this problem after both my Win7 laptop and WinXP desktop both recognized my N7 2013 the first time I connected to them. I had no problem dragging and dropping files.
I had then returned the tab back to BB for a exchange for another. This time after setting up the tab and setting the MTP file toggle and USB settings correctly......The Win7 laptop worked find and recognized the N7 just like it did on the first tab. But now the WinXP desktop did not work and only saw the N7 as a ABD device.
You may already have the correct drivers (if not those are available here in several posts). You just have to direct windows driver update to the correct place for the MTP driver. Here is how i did it.
1. Open up the Device Manager on your PC and locate the Android device it sees. Select the update driver option and you get to the "Welcome to the Hardware Update Wizard" screen.
2. In this window it asks "Can Windows connect to Windows Update to search for software?" Select the 3rd option ' No, not at this time"
3. In the next window "This wizard helps you install software for...." Select the 2nd option "Install from a list or specific location (Advanced)
4. In the "Please choose your search and installation options" window... go down to the bottom and select "Don't search, I will choose the driver to install" option.
5. Now finally the window we need..... "Select the device driver you want to install for this hardware" The "show compatible hardware" button should be selected...if not check that box. You should see 2 choices in the "Model" area..... Google Nexus ADB Interface" and what we need to select " MTP Device" click on the MTP Device and hit next......it should install and your Nexus 7 should then show up properly.
Hope this works for all that have had a hard time as I did....I just found it odd after getting a replacement N7 my XP desktop did not recognize it as it did to the original one I used the day prior.
un1bomber said:
Shows up on my laptop but not on my desktop, have tried back and front USB ports
have uninstalled USB drivers, reinstalled USB drivers (universal adbdriversetup6 downloaded from xda sources)
downloaded android SDK manager and installed whatever USB stuff it had there
used USBdeview to remove any nexus 7 related things and then re-install USB drivers
Cannot for the life of me figure out what's going on... can anyone help me please
When I plug it in my desktop it makes the sound like something got connected... even has the safely remove hardware thing with nexus 7 there, but nothing in my computer
also have tried with/without USB debugging
tried removing my rom and flashing stock etc
Nothing has worked so far
Click to expand...
Click to collapse
Just go in settings then storage and then computer usb connection by opening preferences in storage and then make sure mtp is checked.
Thank you guys SO MUCH for the help... I actually just returned my unit to staples because those POS wont give me a price adjustment vs google play
Will buy another one from google play and follow steps in the thread!
un1bomber said:
Thank you guys SO MUCH for the help... I actually just returned my unit to staples because those POS wont give me a price adjustment vs google play
Will buy another one from google play and follow steps in the thread!
Click to expand...
Click to collapse
We are always here to help.
I remember few years back I installed miui ROM on my xperia n couldn't connect to PC , only to realise USB wasn't turned to mtp by default. I thought it was a bug, tried everything even to fix it only to realise this.
Thanks a lot !!! This solution worked perfectly for me
You saved lots of time for me
Thanks a ton :good::good::good:
Best regards,
RR215 said:
I went around with this problem after both my Win7 laptop and WinXP desktop both recognized my N7 2013 the first time I connected to them. I had no problem dragging and dropping files.
I had then returned the tab back to BB for a exchange for another. This time after setting up the tab and setting the MTP file toggle and USB settings correctly......The Win7 laptop worked find and recognized the N7 just like it did on the first tab. But now the WinXP desktop did not work and only saw the N7 as a ABD device.
You may already have the correct drivers (if not those are available here in several posts). You just have to direct windows driver update to the correct place for the MTP driver. Here is how i did it.
1. Open up the Device Manager on your PC and locate the Android device it sees. Select the update driver option and you get to the "Welcome to the Hardware Update Wizard" screen.
2. In this window it asks "Can Windows connect to Windows Update to search for software?" Select the 3rd option ' No, not at this time"
3. In the next window "This wizard helps you install software for...." Select the 2nd option "Install from a list or specific location (Advanced)
4. In the "Please choose your search and installation options" window... go down to the bottom and select "Don't search, I will choose the driver to install" option.
5. Now finally the window we need..... "Select the device driver you want to install for this hardware" The "show compatible hardware" button should be selected...if not check that box. You should see 2 choices in the "Model" area..... Google Nexus ADB Interface" and what we need to select " MTP Device" click on the MTP Device and hit next......it should install and your Nexus 7 should then show up properly.
Hope this works for all that have had a hard time as I did....I just found it odd after getting a replacement N7 my XP desktop did not recognize it as it did to the original one I used the day prior.
Click to expand...
Click to collapse
If nothing else here has helped you solve this issue, check my thread, it should be of some help to you...
I'm having an issue where I can connect to my laptop in debug mode, but I'm not able to connect in the MTP mode with debug turned off. I expected to be able to mount the device storage in either mode.
Is that correct? If so, any ideas? I do notice I can't seem to get the MTP driver to stay in device manager.
Rick
Got a weird one - got the M9, able to connect it at work and on a laptop but not the computer I've got ADB and everything on.
Phone simply does not recognize as a USB drive, I get that it's looking for "Android phone" but it never shows as a device. (MTP, ADB, etc) Suggesting where the HTC drivers I just downloaded results in me getting that they're not what it's looking for.
This is a computer that has worked for my EVO 4G, 3D, 4G LTE, One m7, m8 along with being fine with a host of other devices.
I've uninstalled and reinstalled everything I know to do but no ADB, no MTP. Not a recognizable device to windows other than being "Android Phone" with no drivers findable.
Some things I've done:
Installed HTC Sync
Deleted HTC Sync
installed HTC drivers pack
removed
Bang head on keyboard
Plug into different USB ports
Change cable
Just one computer, the one that I've used with no problem for ages, wants to be a punk
Have you tried enabling USB debugging?
-settings
-about
-software information
-more
-tap build number 7 times
Then go back to settings and enter developer options and check USB debugging
NotSatan said:
Have you tried enabling USB debugging?
-settings
-about
-software information
-more
-tap build number 7 times
Then go back to settings and enter developer options and check USB debugging
Click to expand...
Click to collapse
Yup. I just get "Android Phone" as an unrecognized device. I've also set to Disk Drive, MTP, debugging on and off.
Just plugged in the M8, same issue... so it's something that's not M9 specific...
Well that's as far as my expertise goes haha.
mildlydisturbed said:
Got a weird one - got the M9, able to connect it at work and on a laptop but not the computer I've got ADB and everything on.
Phone simply does not recognize as a USB drive, I get that it's looking for "Android phone" but it never shows as a device. (MTP, ADB, etc) Suggesting where the HTC drivers I just downloaded results in me getting that they're not what it's looking for.
This is a computer that has worked for my EVO 4G, 3D, 4G LTE, One m7, m8 along with being fine with a host of other devices.
I've uninstalled and reinstalled everything I know to do but no ADB, no MTP. Not a recognizable device to windows other than being "Android Phone" with no drivers findable.
Some things I've done:
Installed HTC Sync
Deleted HTC Sync
installed HTC drivers pack
removed
Bang head on keyboard
Plug into different USB ports
Change cable
Just one computer, the one that I've used with no problem for ages, wants to be a punk
Click to expand...
Click to collapse
Was this resolved? Having this same issue...
It looks like you are just trying to get ADB?
* Make sure USB debugging is enabled (I know you said it is).
* Make sure your computer is not blacklisted on your phone from making connections to ADB.
* Make sure any htc sync or driver package is totally removed.
* Make sure your keyboard still works enough after the head banging. You will only need a mouse, enter, space, a, b, c, d, e, i, s and v to complete the following; but more is always better just in case you need an h or something.
Look in Device Manager. Is it an unknown device (is there a yellow exclamation mark or something next to it)?
Try deleting the driver that it's using - like actually choose to delete the driver software from your machine, not just remove the device.
Once you're totally clean and the phone shows up with a yellow !, try update driver -> let me choose -> have disk -> your android sdk's extras/google-usb-driver .inf.
Pick one of the ADB ones, not sure if it'll be composite or the other one, then test with
Code:
adb devices
in your cmd window.
If it shows up, cool. If not try the other ADB usb driver from the inf...
xfinrodx said:
It looks like you are just trying to get ADB?
* Make sure USB debugging is enabled (I know you said it is).
* Make sure your computer is not blacklisted on your phone from making connections to ADB.
* Make sure any htc sync or driver package is totally removed.
* Make sure your keyboard still works enough after the head banging. You will only need a mouse, enter, space, a, b, c, d, e, i, s and v to complete the following; but more is always better just in case you need an h or something.
Look in Device Manager. Is it an unknown device (is there a yellow exclamation mark or something next to it)?
Try deleting the driver that it's using - like actually choose to delete the driver software from your machine, not just remove the device.
Once you're totally clean and the phone shows up with a yellow !, try update driver -> let me choose -> have disk -> your android sdk's extras/google-usb-driver .inf.
Pick one of the ADB ones, not sure if it'll be composite or the other one, then test with
Code:
adb devices
in your cmd window.
If it shows up, cool. If not try the other ADB usb driver from the inf...
Click to expand...
Click to collapse
Thanks. I tried this and nothing helped. Finding the device from ADB devices isn't the issue. It is that the SD card does not show up in Windows Explorer. Other than taking the SD card out and using a micro SD card adapter for my PC, I cannot transfer files via USB. See attached image. The MTP is the issue. Why doesn't HTC Sync/Drivers from HTC.com fix this? -_-;
Oh, I'm sorry I misunderstood your need. Well if adb works yes can always push/pull... Which version of Windows are you on? Is it possibly a 32/64 bit driver issue? I'm reaching here, HTC sync should cure whatever ails you... I hate MTP.
xfinrodx said:
Oh, I'm sorry I misunderstood your need. Well if adb works yes can always push/pull... Which version of Windows are you on? Is it possibly a 32/64 bit driver issue? I'm reaching here, HTC sync should cure whatever ails you... I hate MTP.
Click to expand...
Click to collapse
Windows 7, yea it's probably a64 bit problem.
typhoonikan said:
Was this resolved? Having this same issue...
Click to expand...
Click to collapse
Resolved after I updated to windows 10
mildlydisturbed said:
Resolved after I updated to windows 10
Click to expand...
Click to collapse
Not for me. Would love a solution.
Bump. Help? So annoying.
typhoonikan said:
Bump. Help? So annoying.
Click to expand...
Click to collapse
I' having the same issue. M9 not recognized as an MTP device on Win 10 64 bit. Running CM 12.1. Adb works, and the device shows up in Device Manager as "MTP USB Device" under "Portable Devices" section. Right clicking gives only propertied and scan for h/w change option, there is no option to update device driver. Phone shows up as HTC M9 under "Unspecified" category in "Devices and Printers".
My Lg G2 runs CM12.1 as well and works fine as mtp device. (Adb works too). I have been trying everything to get M9 working, but failed.
EDIT
Solved the issue trying random things! The issue was the xposed module "Xposed Media Scanner Optimizer" which was preventing MTP mode by not allowing media scanner to run.
droidphile said:
I' having the same issue. M9 not recognized as an MTP device on Win 10 64 bit. Running CM 12.1. Adb works, and the device shows up in Device Manager as "MTP USB Device" under "Portable Devices" section. Right clicking gives only propertied and scan for h/w change option, there is no option to update device driver. Phone shows up as HTC M9 under "Unspecified" category in "Devices and Printers".
My Lg G2 runs CM12.1 as well and works fine as mtp device. (Adb works too). I have been trying everything to get M9 working, but failed.
EDIT
Solved the issue trying random things! The issue was the xposed module "Xposed Media Scanner Optimizer" which was preventing MTP mode by not allowing media scanner to run.
Click to expand...
Click to collapse
I do not have that module installed, so that can't be what is keeping Windows from noticing my phone as a storage device.
Also, if i hadn't mentioned it before, I am able to see my device with adb devices in the command prompt.
typhoonikan said:
I do not have that module installed, so that can't be what is keeping Windows from noticing my phone as a storage device.
Also, if i hadn't mentioned it before, I am able to see my device with adb devices in the command prompt.
Click to expand...
Click to collapse
Most likely it is a driver conflict or missing drivers. Uninstall all portable device drivers and start again.
I wish I stole my HTC M9.
typhoonikan said:
I do not have that module installed, so that can't be what is keeping Windows from noticing my phone as a storage device.
Also, if i hadn't mentioned it before, I am able to see my device with adb devices in the command prompt.
Click to expand...
Click to collapse
I have the same issue, nothing! MTP device driver is not present...adb works but MTP nothing.
Please, someone check if the win 10 installed is N version? maybe is this the problem, maybe....
Thanks
Something to try. Connect your phone to the PC, then go into device manager and look for portable devices. The phone should be listed there and most likely you will see a yellow triangle on it. Click on it and choose to uninstall. After it uninstalls, unplug the phone from the PC and then plug it back in. Allow it to fully re-install before doing anything.
DeeZZ_NuuZZ said:
install another theme from themes Manager which is dark, or has dark Keyboard. the easiest way
Click to expand...
Click to collapse
Nope. I've played with device manager for over an hour at a time. Windows doesn't like m9.
Well, my understanding is that the driver used for mtp for Android devices is the same driver that is used for Windows Media Player. When you connect your phone to the PC and open Windows Media Player, is the phone listed there? If not, then you may have something interfering with media scanner. Have you tried starting the M9 in safe mode and then connecting to the PC?
Weird. You must bring it to store to fix
I have my new Nexus 5X with Android 6 on it. I am trying to unlock and root.
I have enabled USB debugging and OEM unlock.
I have downloaded and installed the SDK package with Platform-Tools and drivers in the 'Extras' folder.
When first plugging in the phone I install the drivers with the 'Have Disk' and browse method.
Every time, installing the driver returns an Error 'Code 10 - device cannot start. 'Android ADB interface' shows up in device manager when I plug in the phone but with an exclamation point.
I have uninstalled, downloaded fresh drivers from other sources, reinstalled, tried plugging the phone in while in 'recovery' mode (starting by pressing all 3 hardware buttons).
I uninstall every time and reboot both the computer and the phone. The drivers simply won't work.
What is going on here? Is the phone/Android 6 still too new to unlock and root?
P.S. I should also say that I go into Developer options and change the Select USB Configuration between PTP and MTP (between which, I have not seen mention of the correct choice. Does it not matter?) - I cannot chose the others RNDIS, Audio Source, or MIDI; it seems to want to default to 'Charging' when I try to change to these choices.
Having the same issues on Windows 8.1. Can't get my 5x to connect to transfer files or to show up in adb.
Just need the right drivers. Download the driver files from here: https://www.dropbox.com/sh/e43knzpxvr9hzqi/AAC7Yiz8EShMpFiMkClPpkC5a?dl=0
1. Then with the phone plugged in and in PTP mode go into the device manager on your PC.
2. You'll probably have an Android device listed with an exclamation point showing. Right click on it.
3. Pick update driver.
4. Pick browse my computer for driver software.
5. Then pick "let me pick from a list of device drivers.
6. Then pick have disk.
7. Navigate to the folder you downloaded and select android_winusb
8. Let it install and you should be ok
bsinc1962 said:
Just need the right drivers. Download the driver files from here: https://www.dropbox.com/sh/e43knzpxvr9hzqi/AAC7Yiz8EShMpFiMkClPpkC5a?dl=0
1. Then with the phone plugged in and in PTP mode go into the device manager on your PC.
2. You'll probably have an Android device listed with an exclamation point showing. Right click on it.
3. Pick update driver.
4. Pick browse my computer for driver software.
5. Then pick "let me pick from a list of device drivers.
6. Then pick have disk.
7. Navigate to the folder you downloaded and select android_winusb
8. Let it install and you should be ok
Click to expand...
Click to collapse
I've got the same problems & the driver did not fix it. My computer won't use the android_winusb file gives me an error that it is not a 64 bit system fle. Same with te official google file.
ahunter said:
I've got the same problems & the driver did not fix it. My computer won't use the android_winusb file gives me an error that it is not a 64 bit system fle. Same with te official google file.
Click to expand...
Click to collapse
I was running into the same issue. The problem is you need to install them first as an ADB Interface Device (not composite) with the phone on and plugged in. From Device Manager choose the Google | Android ADB Interface (not the composite one. I saw another reference to making sure it's in PTP mode which may force it to this one as well but I didn't test). Then when you get into FastBoot mode on your phone and plug it in you can go through the same Update Driver steps and choose the "Android ADB Interface" for it as well when it shows the Nexus 5 with the yellow triangle. Then you should be good to go.
rgerrans said:
I was running into the same issue. The problem is you need to install them first as an ADB Interface Device (not composite) with the phone on and plugged in. From Device Manager choose the Google | Android ADB Interface (not the composite one. I saw another reference to making sure it's in PTP mode which may force it to this one as well but I didn't test). Then when you get into FastBoot mode on your phone and plug it in you can go through the same Update Driver steps and choose the "Android ADB Interface" for it as well when it shows the Nexus 5 with the yellow triangle. Then you should be good to go.
Click to expand...
Click to collapse
My phone shows up as a portable device/Nexus 5x . Are you saying it should be in Device Manager choose the Google | Android ADB Interface?
ahunter said:
My phone shows up as a portable device/Nexus 5x . Are you saying it should be in Device Manager choose the Google | Android ADB Interface?
Click to expand...
Click to collapse
Sorry. I should have been more specific. Part of it is I did so many different approaches they've bled together in my head and I was on my way out the door yesterday when I fired off the reply.
To try to break it down from memory (going to throw in a couple of different options since I can’t seem to fully uninstall / reinstall so please provide any corrections once you get it to work or let me know if anything doesn’t match what you find and I’ll try to remember from there):
Phase I (phone on and connected to computer):
Open Device Manager. My phone shows as Android Device | Android Composite ADB Interface or Android ADB Interface.
If it is the Composite version, I believe I had to update it to the straight “Android ADB Interface to get Phase II to work)
If you don’t see that, look to see if you have any uninstalled devices by scanning for new. If so, then right click on that device, and choose “Update Driver”
Choose “Browse my computer for driver software”
Choose the “Have disk” option and browse to your USB Driver folder
From there, choose “Google | Android ADB Interface”
Phase II (phone in recovery connected to computer)
On phone, choose “Update device from ADB”
Open Device Manager and you should see the Nexus 5 under Other Devices with the yellow triangle.
Right click on it and “Update Drivers”
Choose “Browse my computer for driver software”
Choose “Let me pick from a list….”
Choose “Android Device”
Choose “Android ADB Interface”
Now you should be able to push the update over
Simple method: What I did was plug it in and wait for it to show up in device manager. Then I deleted the device (the one that shows adb) from device manager. Then I unplugged the device and plugged it back in... Then waited for drivers to install on it's own. Everything was good after that.
I have no trouble other than on Windows 10. Windows 10 doesn't even show the drivers from a list to install.
Sent from my Nexus 5X using Tapatalk
I followed this to get my Nexus 5X detected on my Windows 10: http://stackoverflow.com/questions/...ould-we-use-for-the-nexus-5/19839812#19839812
I have no trouble with Fastboot or adb. It only happens when I try and sideload. I end up have to use my Macbook Pro to sideload.
Sent from my Nexus 5X using Tapatalk
bsinc1962 said:
Just need the right drivers. Download the driver files from here:
1. Then with the phone plugged in and in PTP mode go into the device manager on your PC.
2. You'll probably have an Android device listed with an exclamation point showing. Right click on it.
3. Pick update driver.
4. Pick browse my computer for driver software.
5. Then pick "let me pick from a list of device drivers.
6. Then pick have disk.
7. Navigate to the folder you downloaded and select android_winusb
8. Let it install and you should be ok
Click to expand...
Click to collapse
I wish it were that easy. But, no, this does not work. Nor do I believe my issue is the same as you others here, as I have Windows 7 and not the 8.1 and 10 issues that you are having.
No, no matter what driver I use, including any from your kind link, bsinc1962, they return an error, code 10 when trying just to install the drivers. I cannot go further.
What is this Code 10 error preventing drivers from installing?
When I connect Nexus 5X to a Windows 10 PC, I can't see it in File Explorer.
Many people said that one should change the option from charging only to MTP in the USB connection notification, appeared when plugged in. But I don't even have that notification, and cannot find the option anywhere else.
In Devices and Printers, there's a Nexus 5X under Unspecified; and in Device Manager, I can see a "ACER ADB Interface" there which I assume is for Nexus 5X. I tried to download Nexus driver from Google buy it seems is the same with the ACER ADB thing and is not helping.
Any tips or solutions? Thanks in advance!
PS. First xda thread started by me, yay!
UPDATE: After awhile, maybe it's because I slid the screen while connected, the notification did pop up. But EVEN after I chose MTP, there's still nothing in my File Explorer...
Hiya,
I had the same thing happen on my 5X. I was only able to get to the "Use USB for Charge / MTP" dialog by enabling Developer Mode.
To do that: Go to Settings / About Phone, and scroll all the way to the bottom.
Tap "Build number" seven times. On the sixth tap, you should see a message that says "one more tap will unlock Developer mode" or something to that effect.
Back-arrow to the Settings main menu.
Click on Developer options
Look for Networking / Select USB Configuration.
Choose the mode you want.
The notification should appear when you plug in the USB cable to your computer.
elzapato said:
Hiya,
I had the same thing happen on my 5X. I was only able to get to the "Use USB for Charge / MTP" dialog by enabling Developer Mode.
To do that: Go to Settings / About Phone, and scroll all the way to the bottom.
Tap "Build number" seven times. On the sixth tap, you should see a message that says "one more tap will unlock Developer mode" or something to that effect.
Back-arrow to the Settings main menu.
Click on Developer options
Look for Networking / Select USB Configuration.
Choose the mode you want.
The notification should appear when you plug in the USB cable to your computer.
Click to expand...
Click to collapse
Thanks for this info! I'll keep that in mind, but now I still have problem after chose the transfer mode. Maybe it's because I slid the screen while connected, the notification do pop up. But EVEN after I chose MTP, there's still nothing in my File Explorer...
could be a driver issue?
download and install latest usb drivers.
Go to My Computer> Properties>Device Manager> Find the android device>Right Click update driver software>Browse My Computer>set to folder where you have usb driver saved and go from there?
You can also try to let me pick (instead of browse local folders) and pick the google ADB interface from there.
I have also had success in the past using other software (PdaNet) to manage the whole installataion of drivers; but this adds software to both phone and computer ... may or may not be useful.
After re-reading your first post its definately driver related. It shouldnt say Acer just ADB Interface or google adb interface.
alienboytw said:
When I connect Nexus 5X to a Windows 10 PC, I can't see it in File Explorer.
Many people said that one should change the option from charging only to MTP in the USB connection notification, appeared when plugged in. But I don't even have that notification, and cannot find the option anywhere else.
In Devices and Printers, there's a Nexus 5X under Unspecified; and in Device Manager, I can see a "ACER ADB Interface" there which I assume is for Nexus 5X. I tried to download Nexus driver from Google buy it seems is the same with the ACER ADB thing and is not helping.
Any tips or solutions? Thanks in advance!
PS. First xda thread started by me, yay!
UPDATE: After awhile, maybe it's because I slid the screen while connected, the notification did pop up. But EVEN after I chose MTP, there's still nothing in my File Explorer...
Click to expand...
Click to collapse
Check Device Manager, is it listed as ACER Device? It probably is. It happened to me. Select the device, mouse right, update driver, choose "let me pick a driver" or something simmilar. Then you should get a list of compatible drivers and 2 entries, the current ACER driver and some generic USB driver. Choose the generic USB driver. That did the trick for me.
This i got from reddit . I had the same problem today this link helped me .. hope it helps you too
arpan_pratik said:
Check Device Manager, is it listed as ACER Device? It probably is. It happened to me. Select the device, mouse right, update driver, choose "let me pick a driver" or something simmilar. Then you should get a list of compatible drivers and 2 entries, the current ACER driver and some generic USB driver. Choose the generic USB driver. That did the trick for me.
This i got from reddit . I had the same problem today this link helped me .. hope it helps you too
Click to expand...
Click to collapse
@arpan_pratik, Thank you! You are the best! This is exactly what my problem is and I solved it using your suggestion!
Although I didn't yet find any useful information from reddit regarding my issue, you must used some magic keywords
@The_Automator, thank you, too! It indeed is a driver issue. I tried many times to update the driver or uninstall the ACER ADB driver, but none of them worked. Didn't realize that it is Windows chose the wrong default driver. Don't know why, maybe it's because I installed adb before?
So, for the record, here are some key points to solve the problem:
The wrong driver for my Nexus 5X showed in Device Manager is ACER Device\ACER ADB Interface
No use to install Nexus driver from Google, even use "Browse my computer for driver software" and search the extracted Google driver folder. Windows will say the driver is up to date.
So I have to do this: In Device Manager -> RMB on ACER Device\ACER ADB Driver -> Properties -> Update Driver -> Browse my computer for driver software -> Let me pick from a list of device drivers on my computer -> check "Show compatible hardware" -> choose "MTP USB Driver" (this is a Microsoft driver under "standard MTP Device" category) -> Problem solved!
Then I can find my Nexus 5X in Device Manager here: Portable Devices\Nexus 5X
After the right driver installed, if I try again to update the driver using ""Search automatically for updated driver software", Windows 10 will actually install the wrong driver (ACER ADB) back!
Thank you all in this thread to help me exclude other possibilities, lock down the culprit and finally solve the issue!
Just got a Nexus 5X, and I'm having the same problem under Windows 10. I don't see an Acer device in Device Manager though, I see a "Nexus 5X" under "Other devices" with a yellow triangle exclamation mark.
When I tried following the steps, I don't have "Show compatible hardware" nor "MTP USB Driver". When I tried installing "MTP Device", I get an error "The install class is not present or is invalid."
cigar3tte said:
Just got a Nexus 5X, and I'm having the same problem under Windows 10. I don't see an Acer device in Device Manager though, I see a "Nexus 5X" under "Other devices" with a yellow triangle exclamation mark.
When I tried following the steps, I don't have "Show compatible hardware" nor "MTP USB Driver". When I tried installing "MTP Device", I get an error "The install class is not present or is invalid."
Click to expand...
Click to collapse
Were you ever able to get this working on your PC?
azsl1326 said:
Were you ever able to get this working on your PC?
Click to expand...
Click to collapse
Yeah, and it's been a while so I don't remember exactly, but I think it was a different cable that made it work.
I've switched to a Droid Turbo 2. The 5X didn't have enough battery life for my usage.
thanks
i fuking love u
SadsArches said:
i fuking love u
Click to expand...
Click to collapse
Huh? LOL
Sent from my Nexus 5X using Tapatalk
Brilliant! Solved and excellently described. Many thanks.
Bruce
cigar3tte said:
Just got a Nexus 5X, and I'm having the same problem under Windows 10. I don't see an Acer device in Device Manager though, I see a "Nexus 5X" under "Other devices" with a yellow triangle exclamation mark.
When I tried following the steps, I don't have "Show compatible hardware" nor "MTP USB Driver". When I tried installing "MTP Device", I get an error "The install class is not present or is invalid."
Click to expand...
Click to collapse
If you have other android devices that is working on your PC, you'll notice that the driver used is the "wpdmtp.inf" you can get it on your 64-bit Windows on this location:
"C:\Windows\WinSxS\amd64_wpdmtp.inf_31bf3856ad364e35_10.0.16299.15_none_42867195f7d5106b\wpdmtp.inf"
Locate this file via device manager and choose "MTP USB Device"
And viola! You can now transfer files again in your Nexus 5x!
I am in the same boat but my PC stopped recognizing my phone at all. PC will see all my other devices including my pixel 2xl. But every since that Nov update I believe my PC's and diffet cables does not show up at all. Have read all the threads and so far nothing has worked for me.
Travisdroidx2 said:
I am in the same boat but my PC stopped recognizing my phone at all. PC will see all my other devices including my pixel 2xl. But every since that Nov update I believe my PC's and diffet cables does not show up at all. Have read all the threads and so far nothing has worked for me.
Click to expand...
Click to collapse
Did you get it working again? I have 2 other phones working fine but the nexus5x disappeared and cant get it back. Even deleted the cache and the data for the System apps named "External Storage and Media Storage" as some suggested. Shows up as unknown device now.
AlienTeck said:
Did you get it working again? I have 2 other phones working fine but the nexus5x disappeared and cant get it back. Even deleted the cache and the data for the System apps named "External Storage and Media Storage" as some suggested. Shows up as unknown device now.
Click to expand...
Click to collapse
Nope, was never able to find a fix. If you do please let me know.
Yes I got it working. Since longer USB cables only shows unknown device I installed android development system and it made no difference.. But I had a 6inch charging cable that came with my power brick and I tried that and viola the Nexus showed up.. Not as a nexus 5x like before but as something like romaster composite ADB interface or something and I was able to flash TWRP recovery so now I can at least get access to it. Backed up the memory to a flash drive.. Have not flashed SU or anything yet but that should not be a problem with TWRP installed.. And like usual it takes a few flashes and rebooting into TWRP for it to stick other wise the recovery goes away.. Still dont know why the longer USB cables make any difference.. I even tried it out on a USB extension socket which is a 20 foot long USB extender and that also works.. So it must be something else like when I had the MB changed the adapter I was using did not work for data transfer.. Might be using some wire that is missing in the longer cable..