Develop Bugs

[Q] Kezra Value Pack V1.1 Samsung keypad and Restart-loop

Just flashed the latest (as I understand) ROM. Samsung keypad is back (in version V4 it was removed) but I can't use it.
Added languages via Settings -> Languages and keyboard -> Samsung keypad -> Input languages. Checked English, Russian, Latvian. When writting sms, I can switch between input languages, but letters don't change. So no matter what input language you choose, you can write english.
Another sad thing is restart-loop. When phone stays idle for some time, its restarts by itself and goes into restart-loop. Only thing is to flash ROM again.
Any ideas of fixes?

KP has quit ROM cooking, i've used this rom till a month ago, this rare bug is unsolvable now, for example i hadn't this one.
Try some more up-to-date roms, for example Mutant ROM, i use it for several weeks and enjoy it!
Other hand why are you so stuck with samsung keypad? why aren't you using swype for example? Mutant ROM + Swype serve me well for russian\english combo.
Everyone of us can thank KP for his work for SGW community, but his own roms are no more actual today, they've brought much power to modern SGW works.

you could use swiftkey 3.........its a really good keyboard

I've been using K. Rom VPack V1.1 (the one with O.C. kernel capabilities) for quite long (i'm still using it), it's a very very fast/smooth and battery efficient ROM. I underclock Cpu to 1.2 MHz and could use phone for 3-4 (or 5!) days without charging.
I had also same issues with keyboard and restart thing.
So,
1)The samsung keyboard issue has already been solved (check thread for Kezra VPack V1.1)
The problem was that T9DB folder was missing from Rom, so copy from stock ROM T9DB folder and put it in /system Kezra's Rom.
Dont forget to check permissions and restart phone.
2) Restart problem.. i suffer same thing (not any more). For possible solution see http://forum.xda-developers.com/showthread.php?t=1773098
Also (if not already) UPDATE your Baseband/Modem Version to XXLM6 at least! Just flashing Kezra's Rom won't update Baseband/Modem!
Good luck!
..

Looks like I've missed something... never updated Baseband/Modem, mine says XXKL3. Haven't noticed that baseband update is required.
Currently I followed dimaka's advice and moved to newer rom... Bagux Project ROM. It runs almost excellent. There are some glitches like Flashlight turns out after 5 seconds, etc, and I was about to start new topic on that, but now... maybe this all is about Baseband update.
Can someone point me to the right direction? I currently have XXKL3 region Europe/Latvia.
yannis_gr said:
I've been using K. Rom VPack V1.1 (the one with O.C. kernel capabilities) for quite long (i'm still using it), it's a very very fast/smooth and battery efficient ROM. I underclock Cpu to 1.2 MHz and could use phone for 3-4 (or 5!) days without charging.
I had also same issues with keyboard and restart thing.
So,
1)The samsung keyboard issue has already been solved (check thread for Kezra VPack V1.1)
The problem was that T9DB folder was missing from Rom, so copy from stock ROM T9DB folder and put it in /system Kezra's Rom.
Dont forget to check permissions and restart phone.
2) Restart problem.. i suffer same thing (not any more). For possible solution see http://forum.xda-developers.com/showthread.php?t=1773098
Also (if not already) UPDATE your Baseband/Modem Version to XXLM6 at least! Just flashing Kezra's Rom won't update Baseband/Modem!
Good luck!
..
Click to expand...
Click to collapse

I updated Baseband to "i8150XXLM8". Took "Slovakia" from here http://forum.xda-developers.com/showthread.php?t=1570726
So far everything is fine. What do you use to underclock Cpu?

tomzuu said:
I updated Baseband to "i8150XXLM8". Took "Slovakia" from here http://forum.xda-developers.com/showthread.php?t=1570726
So far everything is fine. What do you use to underclock Cpu?
Click to expand...
Click to collapse
You can use Antutu CPU Master along with Antutu Benchmark to rate your phone. They're both free on market.
Set it on 1.2 GHz and post results!

Ok, Antutu results with and without underclock. How are they?

tomzuu said:
Ok, Antutu results with and without underclock. How are they?
Click to expand...
Click to collapse
I think most important is Ram and CPU where Kezra's Rom is a winner!!:victory: (you dont have ext.sdcard that's why sdcard results are zero).
Check out and long last battery screenshot (with very light usage though).

[ROM][29July2013] mROM v4.0 JSS15J - stock 4.3 + GAPPS, MOD(s), etc.

Here is a 4.3 ROM built from AOSP source designed to emulate what a Verizon 4.3 ROM would be like. The changes from AOSP include the addition of GAPPS, addition of Verizon apps, appropriate binaries so everything works, addition of busybox, correct eri.xml, home screen layout to mimic a stock ROM, and the removal of the tethering restriction. The ROM is not pre-rooted, so flash Chainfire's SuperSU if you want root.
As usual, flash at your own risk and post any successes or problems.
Download Link(s) for v4.0: MD5: be4377ab16432112f09d18ae37c91041
DOWNLOAD via Goo.im
Cubby.com MIRROR
SuperSU v1.51 - you may want to check for a more recent version if this link becomes outdated. Flash after you flash the ROM.
Bugs - text-to-speech may not work correctly. Please flash fix attached to this post after flashing the ROM. Thanks AndroJak!
MODS:
Extended Power Menu - CM style
- Ability to reboot, hot reboot, reboot recovery, & reboot bootloader.
- Replaces /system/framework/android.policy.jar
- Thanks to Cyanogenmod and xIC-MACIx
- DOWLOAD
- MIRROR
Thanks to mmuzzy for help building from aosp (fixing t-cdma64 in eri.xml and cell broadcasts menu, plus other stuff I'm probably forgetting), adrynalyne, and djp952 for help building from AOSP.

mwalt2 said:
Here is a stock, rooted, busybox, etc. ROM built from the 4.1.1 AOSP source for Verizon. It has GAPPS included from the GSM developer preview and the Verizon apps as well (MyVerizon and the backup one). My attempt was to make a stock rooted ROM for Verizon based off of the 4.1.1 source on AOSP. Some things are still added to this rom from 4.0.4 IMM76K Verizon ROM, but I did include the new binaries for toro. I haven't fully tested everything, but camera, google now, gps, and wifi all work as expected. I'll try to get some add-on's / mods before too long and have them posted as flashable .zips.
As usual, flash at your own risk and post any successes or problems.
Download Link(s):
about 5 min or so....
Click to expand...
Click to collapse
first cant wait!!! ^.^

Here we go!!!!!

Is Google Now working? I know mmuzzy was having issues on his AOSP ROM. Either way, I'll give 'er a test once the download links are available.

Download for 1 server is ready now. I'll get a mirror up as well.
BrandT90 said:
Is Google Now working? I know mmuzzy was having issues on his AOSP ROM. Either way, I'll give 'er a test once the download links are available.
Click to expand...
Click to collapse
Yes, it's working. I asked it how long a bridge was and it read the answer back to me. I haven't done much more than that though yet.

Downloading. Looking forward to this. Thanks Mwalt for sharing!!!
Quick DL as well. 2 minutes has got to be a new record for a JB rom

BrandT90 said:
Is Google Now working? I know mmuzzy was having issues on his AOSP ROM. Either way, I'll give 'er a test once the download links are available.
Click to expand...
Click to collapse
OP says Google Now is working. I'm downloading now.

excellent. you're a regular johnny on the spot!

downloading now, hope its all good! i'm looking for a "stock jb" style rom of the newest update. ill post my outcome shortly. going to test the basics that are supposed to work.

Is a flash to the JB bootloader recommended? Finally, a build that seems to have all/most components working! No issues with the 4G's or the LTE's?? Lol.
Galaxy Nexus - Slim ICS 4.2

Downloading now. Any thoughts on current JB kernel compatibility?

i wiped data, cache and dalvik cache 2x each, installed and installed trinity kernel on top and hit reboot. (i like trinity for the colors and such, and good battery life ).
first boot took a minute.
updating some apps and gonna test some things.
still getting t-cdma 64 as a carrier

mwalt2 said:
Here is a stock, rooted, busybox, etc. ROM built from the 4.1.1 AOSP source for Verizon. It has GAPPS included from the GSM developer preview and the Verizon apps as well (MyVerizon and the backup one). My attempt was to make a stock rooted ROM for Verizon based off of the 4.1.1 source on AOSP. Some things are still added to this rom from 4.0.4 IMM76K Verizon ROM, but I did include the new binaries for toro. I haven't fully tested everything, but camera, google now, gps, and wifi all work as expected. I'll try to get some add-on's / mods before too long and have them posted as flashable .zips.
As usual, flash at your own risk and post any successes or problems.
Download Link(s):
DOWNLOAD from Dev-Host
MD5: 8383b87cc2f9e5b510807c3034052ffe
Click to expand...
Click to collapse
Any issues in this build? Also, what are the install instructions?

when going to sounds to set ringtones i have a lot of doubles of default ringtones, wonder where i can remove them?

^System/media/ringtones maybe?
Galaxy Nexus - Slim ICS 4.2

works well so far. thanks!

xweaponx said:
Downloading now. Any thoughts on current JB kernel compatibility?
Click to expand...
Click to collapse
I've always used stock, so I can't really comment. Now that source is out, I'd expect the JB kernels to work better.
imablackhat said:
still getting t-cdma 64 as a carrier
Click to expand...
Click to collapse
No sure what causes this, but I've never seen it with this build or the previous developer preview build. Did it happen on first boot before you installed anything else?
tycoon177 said:
Any issues in this build? Also, what are the install instructions?
Click to expand...
Click to collapse
I'd recommend a full factory reset, but people can try what they feel comfortable with. Personally, I did a factory reset, wiped both caches, and then flashed the ROM (with TWRP).
imablackhat said:
when going to sounds to set ringtones i have a lot of doubles of default ringtones, wonder where i can remove them?
Click to expand...
Click to collapse
Do you have any on your sdcard partition in the Ringtones folder? If not, I'd check \system\media\audio path (subfolders for ringtones, alarms, etc). Delete any duplicates you find in there. I don't have any duplicates and there aren't any in the rom.zip I uploaded.

just overwrote mms.apk in system/apps to get the custom pink mms, and got a quick reboot to my boot screen, this never happened on 4.1 roms that weren't source, don't know if this is normal because i replaced the app and it was a one time thing (i hope). as far as going to system/media/ringtones, i see them but there arent any doubles, however theres doubles when i go to select a ringtone from the menu, for everything system related, ringtones and notifications.

What issues have people had? Any boot issues?

I replaced the "stock" keypress ogg files from ics/jelly bean that sound better with this 4.1.1 release, the new key click sounds are horrible. works fine. i used to have t-cdma 64 with any build from 4.1.1 there is a fix that works that ill just apply. its a xml file or something.

[Custom Rom]KangVIP Rom-date (update 16.05.)closed

As always, use at your own risk!​
Because my English is not very, I can only use Google to translate. I hope it's still understandable.
This is Rome for the MT7-L09 and the Asian MT7-L10, base is the Asian. Previous experience it only runs on and the MT7 - L09. KangVIP offers to Rome but also for other versions.
prerequisite:
The boot loader must be open and installed CWM. In addition, you should the B127 MT7-L09 Western Europe or the B122SP06 installed, otherwise it will get to the bootloop.
- B121-SP02A1
- B122SP06v1.1
- B122SP06v1.2
- B123SP03
(When you first start there must be a data connection, as King User (SuperSU) is updated. Otherwise, no root!)
- B125SP01(Does not work with Vodafone!)
(Here SuperSU.zip must be installed as King user (root) is no longer in it!)
Themespatch
- B125 V2(Does not work with Vodafone!)
420DPI Patch
- B125 V2.1(Does not work with Vodafone!)
420 DPI Patch
- B126SP03(Does not work with Vodafone!)
Quelle
installation:
- The best, but not a must, you use the KangVIP CWM.
- Download Rom and the Mate7. Whether internal or external SD does not matter.
optional
- Secure with Titanium Backup everything.
- Copy the Play Store app (Phonesky.apk) from system / priv app on the memory card, as in this version lacks. Then just copy back into CWM cache and Dalvik wipen.
- Booting into the CWM and make a backup.
- Make Fatory reset.
- Now the install Zip.
- Restart the device.
Alternatively, install Google Apps:
PA_Gapps Modular Pico (35MB)
(the wichtigstens Gapps for calendar sync, PlayStore, etc.)
or
Banks Gapps on XDA
(different packages with additional Gapps)
Those coming from Rome KangVIP B121-SP02A1, it can iron directly over it. All settings and data are retained.
Who backed up with Titanium Backup can backup his (No system apps are written in red!) To play back.
The first start takes a little longer. At the first window you will have everything in Asian, patience, switches. Then there is the normal installation.
Go to Rome, for me it runs without problems.
Advantage (my opinion):
- Deodexd
- Use the Advanced Settings (unte settings) can be removed network operator name or enter another name. It is possible to change battery indicator / Hide. Clock can be centered or hidden. It is an advanced power menu available. And much more.
cons:
Do I still have not found.
To mention:
Since I'm at the Telekom I can not comment as it looks (800 Mhz) with LTE. For me, LTE is running. When choosing one can not choose anything too. I suspect that it has to do with the dual capability of the original version and probably Sim are two assigned.
The Asian contained programs, they can all be safely deleted.
Xposed (2.4.1) and modules run.
This note is that then the themes do not work!
If you want to return, simply play through CWM backup back.
My thanks go to KangVIP.
XDADevDB Information
KangVIP for MT7-L10/MT7-L09
Contributors
KangVIP
Source Code: http://translate.google.de/translat...vmall.com/thread-2301046-1-1.html&prev=search
ROM OS Version: 4.4.2
Based On: asia Rom
Version Information
Status: Custom
Created 2015-03-26

finally...
Thanks... I'll try this as soon as I got some free time... Maybe the weekend...

Better ask before ok and uncertainty.

Hi Fooox1
Here you are for the first question...
At the moment I have B130... Should I downgrade to B127?

No, 127 is the minimum requirement. Can use the 130.

It is the best rom for Mate 7
I use the month. Good job Fooox1 by topic

Can I just verified and can not be fooled by the 122 corresponds to the 127.

Thanks Fooox1. Nice to see a new rom. I 'll try it durring weekend. Curious
EDIT:
Well... I gave it a go. Easy to install with no problems. Works fine, but even if I choose English language there are a lot of Chinese things in there.
I did't notice any difference in speed. Maybe in Antutu benchmarks (but I forgot to run it).
Finally I restored my previews backup only because of the Chinese that I cannot understand

tried and...
Thanks again to fooox1 for posting instructions how to...
To be honest it's really simple and I did not found any problem to install the custom rom.
Unfortunately - as already noticed by freco - still there's a lot of Chinese stuff (probably bloatware for the largest part). More importantly the virtual keyboard it quite different as it includes (obviously) Chinese I was really in trouble to use it....
After a couple of hours, I restored the recovery backup... and I'm waiting for lollipop update
Ciao..

I can not confirm your problems unfortunately. The Chinese programs can all be deleted. When the keyboard is Google doing. Also works without hesitation. Have the Mate switched to English, also because there is no Chinese characters.
Made possible, impatient maintains her when you first start, after flashing. Here you should wait at the first window until it changes from China to the appropriate language and then set on.

Even if I changed language, restart, finish setup, restart, there are still chinese characters in several places and search boxes.
Otherwise everything works perfect.

Can you give me a position exactly, then I can check with me. The one where me is something shows up at the Apollo player, with the name. But only affects ü, ä, ß, etc.

I cannot. Sorry.
I already switched back to my older backup.

No Problem. I invite tomorrow once the high 1.2.

Compatible mate 7 lt09 europeen merci

lechat33 said:
Compatible mate 7 lt09 europeen merci
Click to expand...
Click to collapse
Yes. My mate is LT09 and I confirm you can install it whithout problem.

Question: will gravitybox work with this ROM? Xposed modules can't override the stock theme on the stock ROM at all. If Xposed modules like gravitybox work well then I'll definitely install this ROM when I get a chance

Yes, running like the Stock Rom. Nothing more, nothing less. The Rom yes the Stock base.
http://forum.xda-developers.com/mate-7/themes-apps/xposed-modules-t2957769

i love it , theres more option than my European stock rom!!

Update B125SP01.

[ROM] [AROMA] [ULTIMATE Note 7 Hybrid] [N930PVPU1APGC] [v1.1] [updated 5/12/2017

Ultimate Note7 Hybrid aka UN7​The next generation ROM for the Sprint Galaxy Note 4!​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About ROM​Warning: This ROM is ONLY for the Sprint SM-N910P!!! DO NOT FLASH THIS ROM ON ANY OTHER MODEL!!! If you do then please don't ask for help in this thread. You are on your own! Know what you are doing before flashing and modifying your phone!!! Yes this is an amazing rom BUT it is for the Sprint network model SM-N910P ONLY!!! Please resist the urge to flash this rom on any other model. This is your fair warning.
Initial Release: v1.0
This is a "stock" build with no custom mods other than unlocked native hotspot
Fully deodexed framework and system apps
I built the entire rom and made underhood adjustments as needed. There is way too much work to list here!!!
Root by @Chainfire
Busybox
Init.d support
100% Sprint Note 7 framework and system apps.
100% Sprint Note 4 system files for hardware & feature dependecies.
This rom is guaranteed to bring new life into your Note 4 and make you love it again!
Software version: N930PVPU1APGC
Kernel: Official Samsung N910PVPS4DPJ1 modified to support Samsung UX software
Features​This is a mostly stock rom running the stock Samsung kernel. Although there are no major problems in the rom, I do plan to continue making fine adjustments in order to make this rom as perfect as I can. However, it is a port and many things have been done precisely for the smoothest and most trouble-free operation. Expect minimal issues. Currently this rom is amazing. In the future it will be even more amazing. The ROM includes all working features of the Sprint Note 7 software version N930PVPU1APGC excluding items listed below.
(other than iris and fingerprint scanner and fm radio)
All stock Samsung and Google apps as well as the main Sprint apps like Visual Voicemail and Sprint Zone
Native Hotspot unlocked
Disabled High Volume Warning
5-way Reboot mod for convenience
Removed Itson
Removed/Disabled Knox and related apk's & libs/modules
Removed Sprint bloat installer and Sprint ID
Removed WhatsAppDownloader
Removed Facebook and facebook feature apps (can be downloaded from Google Play)
Removed Samsung Pay and Payment Framework (they are useless on rooted roms since they don't work if you have a rooted system or have tripped knox flag)
There are a few csc tweaks as well as build.prop tweaks. The usual. Nothing far from stock.
Added the following apps:
Peel Smart Remote ( Why not? The Note 4 has a IR blaster unlike the note 7 )
GifMaker app (is an add-on feature for the stock Samsung photo gallery and can be found in the stock gallery's menu)
Samsung fonts package (can be accessed from fonts settings. There's a lot so it takes a few seconds to load them all. When you open fonts settings be patient, they will load)
S7 Edge Nougat TW Launcher
Chinese Smart Manager because it's prettier!
Added Features:
None at this time
Known issues:
This is the list of known minor issues upon initial release.
Always On Display aka "AOD", Edge Lighting and Night Clock are obviously not gonna work properly.
(I have it turned off by default. You can enable it and play with it as well as try different "AOD "fixes" that may be available)
Fingerprint Scanner not working (Workaround added)
No Iris Scanner (I removed instances of Irus scanner in setting because obviously the N4 has no Iris scanner module)
FM radio is broken (I plan to fix this in the future as time permits. (I simply did not make this a priority )
WiFi calling is impossible to fix. (The IMS versions of N4 and N7 are very different. No way to fix this with the N7 dialer)
Update PRL and Profile is not working yet. I plan to fix this when I have more time. Fixed by @jc.m !!!
Launcher swiping left and right has a glitch where it sticks if you press to swipe between home screens
(use short "flicks" instead and there's no issue swiping left & right) Fixed! Flashable zip fix is in post #2
Lockscreen pin/password entry causes reboot.. Fixed by @carlosggb !!!
There are probably a few more minor things that i'm forgetting so I will work on a more precise bug list as I get to them.
***Please report any issues or bugs if you find something. Also PM me so your report doesn't get overlooked in the thread***
Changelog​***v1.0 Initial release (rom features listed above)***​***v1.1 Aroma Update***​REBOOT UNLOCK ISSUE FIXED!!!! @carlosggb
PRL UPDATE FIXED!!!! (Thanks @jc.m!!!!)
3minit Battery and Clock Added!!!
Default DPI changed to 560 (from 640)
MTP Dialog removed
Call Recording (With auto call recording to all numbers or specific numbers!)
AOD Tweaks added (Including custom brightness)
Added Fingerprint workaround (Instructions Detailed on Post #5)
Gestures and TWSwipe added to Stock Launcher
Launcher flicker fixed (Thanks @tx_dbs_tx!!!!)
Added Viper4Android
UHQ Modded Camera
DolbyAtmos added
Camera Flash mod under 15%
Added Extra Toggles!! (Thanks @ianmb!!!)
All apps multiwindow and multi-instance
USB Plug/Unplug disable wake up
Installing app older versions over newer allowed
A Couple of bootanimations included
Fixed Gallery bug (Thanks @ianmb!!!)
Fixed Calendar bug (Thanks @ianmb!!!)
Fixed Keyboard bug (Thanks @ianmb!!!)
Added Updated PhotoStudio (Thanks @ianmb!!!)
Added RomControl
Home button Wake via romcontrol
Inmersive Mode via RC
Permanent Notifications Removable (Toggle in RC)
IME Notifications Removable (Toggle in RC)
Custom Screen Off Timeout added to RC
Added DBeditor, Adaway and Texdroider DPI Changer apps
More Csc tweaks
And a few things more i don't remember​
Flashing instructions:​Before you flash this rom you absolutely MUST be running the latest N910PVPS4DPJ1 firmware for the Sprint Note 4. Specifically the bootloader and modem. Your phone needs to be fully activated prior to flashing any custom rom to ensure a trouble-free transition to this rom. Before you flash this rom, while on a stock Sprint N4 rom, go to Settings/System updates and update PRL then update Profile. Reboot your phone and then go to Settings/Activate this device and launch it to properly activate your phone on the Sprint network. Once this completes, make sure data, calls messaging/mms and gps works as it should. Once everything is activated and working, then proceed with the flashing instructions below. If you ignore this requirement please expect issues and don't ask for help until you do these initial steps.
If you are running software older than PJ1 then you can either take the ota updates in order on your phone via OTA updates, or use odin to flash the software in order of release until you are fully updated. OTA updates on your phone are installed differently than odin packages therefore you may only have to take one or two updates to become current. The OTA updates run scripts to patch your current rom unlike odin tar packages that completely write the entire partition replacing everything clean. I will not go into great detail about that here. I have covered this many times in my other threads so if you aren't sure then do some searching here in the Note 4 forums. If you already updated your software past the PJ1 version then you can try to flash the rom BUT you could possibly have hardware issues with wifi, etc. So if you want to play it safe, revert to the official PJ1 firmware which can be done by odin flashing the stock N910PVPS4DPJ1 software on your PC or a custom firmware only package that can be packaged for this purpose. Just ask if you need help finding it there's a couple of people here that can help with that. My advice is to run this rom with the PJ1 firmware for the best results since the kernel, modules and hardware specific software is based on version PJ1.
***Before you flash this rom, please make sure your battery has at least 30% charge***​
OK... Lets begin!
1. Download the rom
2. Check the MD5!!! Use a MD5 checksum tool on your pc or phone (Google is your friend)
3. Copy the downloaded rom to your phone's internal storage or micro-sd card
Note: It has become apparent to me that if you are coming from another custom rom, especially another port rom, that you MUST also wipe your internal storage. Left over data from other roms DO cause major problems! So if you want the best trouble-free experience with this rom, I highly recommend that you backup anything you need from you internal storage and wipe it in recovery. You should do this before placing this rom on your internal storage or else put the rom zip on your micro-sd card.
4. Backup anything you need to backup from your internal storage and copy it to your pc or sd-card (DO NOT RESTORE BACKED UP APPS! INSTALL THEM FRESH FOR THE BEST TROUBLE-FREE EXPERIENCE!)
5. Reboot to TWRP custom recovery. Press "Wipe". Do the "Factory Reset" several times then go into "Advanced Wipe" options and wipe Dalvic-Cache, System, Data, and Cache several times.
6. Go to recovery home screen and select "Install" and select the rom zip that you have already copied to your phone in step 3 above. Install the rom and the script will prompt you to reboot system when it is finished flashing.
7. The initial boot process will take around 12 minutes. Please be patient. It WILL boot.
8. Once the phone has booted and you will see "Installing Applications". The phone will reboot once during this process then continue installing upon reboot.
9. Once you reach the setup wizard ...
10.Reboot to Recovery and Flash Modset, pick your options in the Aroma!!
11.Once you are back to the Wizard Proceed as usual and setup your phone. At the very last step when allowing the weather location access the phone will reboot one more time. Upon reboot you will be at the home screen.
12.If you picked Magisk as your root method, go to the Download folder and install MagiskManager apk or you wont have root access!
13.That's it! You're done! You are now going to smile as you experience the best ROM for the Sprint Galaxy N4 to date.
Note: Immediately upon reaching the home screen you may notice some lagginess. This is due to Google and Samsung accounts syncing all of their respective account features at once. I highly recommend that you first go to cloud/sync settings and set these account options right away to conserve battery and data usage Uncheck the things you don't want or need.
Enjoy the official Note 7 port ROM for the Sprint Samsung Galaxy Note 4! Please feel free to post rom feedback and support questions.
Credits​Without the following people NONE of this would be possible. Period.​@Chainfire for root and SuperSU. Thank you!​@iBotPeaches for the continued development and support of apktool. Thank you!​@JesusFreke for smali/baksmali tools! Thank you!​
ROM Development​tx_dbs_tx​
Modset Development​carlosggb​
Hybrid ROM Testing & Troubleshooting Team​The following XDA members contributed to the success of this ROM​(in alphabetical order... more people will be added)​@Cflynt​@freeza​@ianmb​@ipodhacked86​@jc.m​@Jhill110​@kenjesse​@LMMT​@Qubanaso​@SaintZ93​@samep​@wantedman76​@Zaileion​
Follow me on my google hangouts for current and up to date discussions on current and future rom projects! We have fun and talk about anything! Just PM me your gmail address and I can add you to my Hangouts. Don't forget to introduce yourself with your XDA username so other people will know who you are. See you there!
Donate​(Click the paragraph below or the orange "donate" button below my avatar from any of my posts)​I want to kindly ask that each person who downloads this rom to please consider making a donation for all of my time and hard work! I spent months on this and many long nights getting thing working right for everyone here to enjoy. It was grueling at times. It's not the amount that counts, it's the fact that you took the time to donate that means the most to me. It is truly appreciated and it shows me that people do appreciate what I do for the community. Without this kind of gesture developers like myself are not inclined to continue devoting this kind of work in the future. Depending on the downloads-to-donations ratio for this rom, I will take this into consideration when deciding on any future projects. Thank you to everyone for your continued support!​P(lease enter your XDA username in the "Notes" section of you PayPal transaction)​
Top Supporters​@radjay​@Hec1N1​
DOWNLOAD​( MD5 checksums are provided below. They are the same regardless of link used )​Ultimate Note7 Hybrid SM-N930P v1.0​MD5: F44AB6C8CB762CD912FDA26610233293​
UN7 Modset v1.1​MD5: 65ABD93452608DD53B91EE18F8A34AD9​
Alternate links​Ultimate Note7 Hybrid SM-N930P v1.0​UN7 Modset vv1.1​
XDA:DevDB Information
ULTIMATE Note 7 Hybrid [N930PVPU1APGC], ROM for the Sprint Samsung Galaxy Note 4
Contributors
tx_dbs_tx, carlosggb
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: N910PVPS4DPJ1_N910PSPT4DPJ1_N910PVPS4DPJ1_HOME
Based On: AP_N930PVPU1APGC_CL8706608_QB10377011_REV00_user_low_ship_MULTI_CERT_meta
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2017-05-12
Created 2017-01-14
Last Updated 2017-08-25

Holy cow it's TX... Sup man? I have moved on to an unlocked Note 9 (Snapdragon) that I'm using on a tracfone related service. For which I got a t-mobile tracfone sim for easier compatibility with wifi calling. Which now works by the way. Saving $$ on a phone bill has actually freed up $ for other cool things/projects like doing some TV repair. Haven't felt any need to root actually. I use it for work big time now & don't want to complicate things. Moved away from Sprint which was the only issue with this ROM but you had a solution for that too.
Sprint gone now (on its way out)
Sent from my SM-N960U1 using Tapatalk

Fixes and Additional Files
SMS/MMS​During testing a few people had issues with sms/mms not sending after a reboot. The guys figured out a fix for this problem so I created a flashable fix which will be copied to your sd card upon flashing the rom. If you definitely have a problem sending sms/mms and it becomes a constant thing then you need to flash this fix. It's a simple edit in one xml file in csc. Simply flash AlternateSmsMmsSendingFix_UN7_Hybrid_by.txdbstx.zip
and reboot. That should fix the sms/mms sending problem.
==========================================================================
Root & SuperSU after a factory reset​The original SuperSU root package will also be copied to your sd card during the rom flash. You will need this if you do a factory reset because you will lose root. Simply flash SR1-SuperSU-v2.78-SR1-20160915123031.zip in recovery AFTER you have done a factory reset AND rebooted your phone at least once.
==========================================================================
Samsung Gallery​If your photo thumbnails disappear in Samsung Gallery then wipe the data and cache for Gallery in "Applications" section of Settings. This should fix the problem. :good:
==========================================================================
The Notorious TouchWiz Launcher Swipe Glitch​Flash this UN7-TW-Launcher-Fix-by-tx_dbs_tx.zip and the bug will be gone. You can use any compatible TW launcher without worrying about the launcher swipe glitch. Remember, this fix took me a while to figure out. It should work on other N7 port roms that have the same issue. But please do NOT reupload or post other links to my fixes in other rom threads. Instead, direct people here to this post and make sure people understand that there is a real fix for this problem and I am the one who took the time to fix it 100%. Thank you and enjoy!

Kernels
​I highly recommend that you NOT flash kernels from other N4 variants. They likely have different configs for those models. It's not worth it. If you didn't listen to this advice and flashed a different kernel and need to flash the original kernel, check out the recovery flashable kernels here.
==================================================​Original Ultimate Note7 PJ1 Kernel​This is the original PJ1 kernel that is specifically modified for this UN7 Hybrid ROM. (Includes original root package)​UN7_Hybrid_SM-N930P-PJ1-KernelOnlyPlusRoot.zip​==================================================​BeastMode r61 PJ1 Kernel exclusively for Ultimate Note7 Hybrid ROM​This is a custom tweaked Samsung PJ1 kernel that is specifically modified for this rom by none other than @freeza.​BeastMode-Kernel-r61-MM-N910P-PJ1-RAGE-UN7-Hybrid-ROM​
==================================================​BeastMode r61 PJ1 Kernel "ZEROLEMON" exclusively for Ultimate Note7 Hybrid ROM​This is the exact same kernel as above except it supports ZEROLEMON and other extended capacity batteries.​BeastMode-Kernel-r61-MM-N910P-PJ1-RAGE-ZL-UN7-Hybrid-ROM​
For kernel source & details on BeastMode Kernel vist freeza's THREAD​

Rules for this thread
I want to keep this thread 100% positive with zero negativity. So I ask that everybody here please treat others with respect and don't post rude or insulting comments towards other people. Nobody here is perfect and I know for a fact that everybody has something to offer so never underestimate the other girl/guy. I have learned that the best people are those who have not been given the chance to shine. Trust me. Thanks for keeping the thread awesome!!! :highfive:
My fellow dev friends will help out as much as they can. So if you ask a question and I haven't replied, most likely someone here will see your post and try to lend you a hand. So just know that the guys who are part of my private dev group are patrolling these forums and they have my permission to offer advice etc in my absence. They are familiar with the rom and it's progression from the beginning so you can trust their input. Thank you. And don't forget to rate this thread at the very top!

STEPS TO SETUP FINGERPRINT (LONG BUT VERY DETAILED TO PREVENT ISSUES )
1. ALL FILES NEEDED ARE PUSHED TO YOUR PHONE DOWNLOAD FOLDER WITH THE INSTALLATION OF THE MODSET
RESPECT THE SEQUENCE, DON'T CHANGE ORDER AND DON'T SKIP STEPS!!!
2. install and Open Applock ( apk is in internal storage/Download)
3. open AppLock / set master pin
4. go to settings tab then password settings
5. Select lock type (make sure password(pin) is set by default or change to one of the other options)
6. go to settings / Enable Service - Tick / App Lock - Tick (but it should be ticked by default)
7. go to Home Screen Lock / Switch on Home Screen Lock
8. Setup Authorization email (required)
9. Select AppLock as Launcher (then app lock will ask you what launcher you wish to use, you can change this later if you install a different launcher)
10. App lock will close / reopen app lock and enter pin
11. Apply Lock Convenience Feature - Tick
12. exit AppLock by pressing home button
13. go to phone settings / accessibility / scroll down to services and switch on AppLock / enter pin
MAKE SURE TO GIVE ACCESSIBILITY ACCESS TO THE APP BY GOING TO THE SYSTEM SETTINGS ->ACCESSIBILITY, SCROLL TO SERVICES AND SWITCH ON APPLOCK BEFORE DOING STEP 14!!!!!
14. reboot into recovery / flash N4settings.zip (internal storage/Download) and reboot
***It is CRITICAL that you follow these next steps VERY SPECIFICALLY and DO NOTHING ELSE***
15. go to UN7 RomControl / Misc and Launcher Tab / Select Fingerprint Management
16. Select Fingerprint manager to register fingerprints / click ok
17. swipe down on home button repeatedly until it says complete (should be 10 times)
18. Setup Backup Password
19. Do NOT Enable Fingerprint Lock (select cancel)
20. Add 2nd and 3rd fingerprint (you can use this to add additional fingers)
21. Reboot into recovery / flash N7settings.zip (internal storage/Download) then reboot
22. Open App Lock / Enter Pin
23. Select settings tab then password settings / Use fingerprint - Tick
24. Go into phone system settings / Lock Screen and Security / Select Screen Lock type NONE
25. Open UN7 RomColtrol and open Mod Centeral / Select AddBlocker and enable
26. Reboot
27. Profit!!

Thank you! Can't wait to try this out. Downloading now and have to update bootloader. Will report back later on.

Enjoy this guys...long time in the making!

Yeah guys, you're in for a treat. This one's a game changer.
Sent from my SM-N920P using Tapatalk

Just out of curiosity as I wait for everything to download, does this have themes working?

OMG, It's here! :victory:
I was feeling depressed today, and then i saw this!
Downloading now, can't wait to flash.
:highfive: Thank you @tx_dbs_tx and team, for all your hard work and time involved to bring us this awesome rom!
I'm sure it'll be great! :good:

fredgar75 said:
Just out of curiosity as I wait for everything to download, does this have themes working?
Click to expand...
Click to collapse
This is the real deal. Themes absolutely work!

aaron74 said:
OMG, It's here! :victory:
I was feeling depressed today, and then i saw this!
Downloading now, can't wait to flash.
:highfive: Thank you @tx_dbs_tx and team, for all your hard work and time involved to bring us this awesome rom!
I'm sure it'll be great! :good:
Click to expand...
Click to collapse
And Thank you Ohio for making America Great again! Enjoy!

tx_dbs_tx said:
And Thank you Ohio for making America Great again! Enjoy!
Click to expand...
Click to collapse
For Sure!!! plus also Donation Sent! :good:

ok currently i am at the restoring screen restoring a bunch of apps. i'm asssuming that means they get installed fresh and not as restored from a backup. When you said dont restore from backup you were refering to titanium backup or similair?

He has done it again....good work
Im still runnin Hybrid 3.0 im looking forward to this.

Thank you very much...I have been waiting for this.
I am now on PK1... Anyone tried it on PK1?
If I want to downgrade to PJ1 via odin my device won't brick?

anees02 said:
Thank you very much...I have been waiting for this.
I am now on PK1... Anyone tried it on PK1?
If I want to downgrade to PJ1 via odin my device won't brick?
Click to expand...
Click to collapse
just odin bl/fw is the easiest/fastest way rather than odin the entire stock rom.
i odin'd from PG1 to PK1 and vice versa

KLPFL said:
just odin bl/fw is the easiest/fastest way rather than odin the entire stock rom.
i odin'd from PG1 to PK1 and vice versa
Click to expand...
Click to collapse
Then I will delete all files from the PJ1 tar file except aboot file only and flash?

anees02 said:
Then I will delete all files from the PJ1 tar file except aboot file only and flash?
Click to expand...
Click to collapse
if you know how... you would need to have two tar file.. one for baseband and one firmware.
---------- Post added at 04:16 PM ---------- Previous post was at 04:12 PM ----------
give me a second.. i'll upload the PJ1 bl/fw for you...
---------- Post added at 04:20 PM ---------- Previous post was at 04:16 PM ----------
here is the BL/FW i created:
uncheck auto reboot under Option on Odin app...
load the firmware or baseband doesn't matter which one is first... pull battery after you odin one of them, then reboot in download mode volume down + home + power keys at the same time. odin the other file, pull out battery then reboot into recovery then flash your rom... of course your rom has to be in External SDcard and make sure you follow Ops installation instructions.
https://www.dropbox.com/s/juzvlftjbeltrfr/N910P-PJ1-baseband.tar?dl=0
https://www.dropbox.com/s/pf62zcb422nnqfn/N910P-PJ1-firmware.tar?dl=0
Updated download link.. go here.
https://forum.xda-developers.com/no...-baseband-file-to-flash-t3573701/post71463151

I finally got this up and running. Thank you thank you thank you! It is running great so far. Gonna give it a couple of days to settle and will report back if I find anything. And yes, themes are working great.

[ROM] TeleNougat V4.5

TeleNougat V4.5 for Sprint
@tdunham managed to get the stock deodexed Nougat rom which is based on the Sprint QC5 7.0 Nougat Note 5. I have everything tweaked in this rom specifically for the s6+ Sprint users.
"Features:
- Pre-Rooted with Magisk
- Hotspot enabled
- Knox Removed
- ItsOn Removed
- Extra Toggles added
- MSL disabled in ##DATA menu"
- S8 Apps:
Calculator/Calendar/Camera/Clock/Contacts/DownloadUi/Email/Galaxyapps/Gallery/Launcher feat. Hello Bixby/Lockscreen/Phone/SamsungInterent/Messages/Music/MyFiles/Phone/Video/Voicerecorder
Known Issues
1. language settings inside of Language and Input fc. (the issue is in systemui if someone wants to play around with it, may not get fixed anytime soon since no one really changes it from english anyway.
2. Hello Bixby app (uncheck video to not get a fc)
3. Night Clock and AOD doesnt work (due to kerne)
ROM INFO
Since this is stock based, everything Sprint related works. (prl, profile update, wifi calling, voicemail)
Personally prefer you to be on QC5 everything first (check general section in you need help odin to Nougat stock.)
Fresh wiped phone is always preferred before installing roms.
Flashing tutorial if needed:
1. Grab a cold one. (Key step)
2. Boot into twrp and WIPE SYSTEM, dalvik cache, cache in TWRP before flashing
3. Flash rom
4. Reboot
*dont forget that Android 7.0 is API 24 which means XPOSED will not work, there isn't an unofficial or official build for it yet.*
Rom Links:
V2 TeleNougat_V2Final4/20
V3 TeleNougat_V3
V4 TeleNougatV4_4/27Build
V4.5 TeleNougat4.5
V4.5 changelog: since noone has been complaing about the test 4.5, here it is. Bixby is pretty much perfect (if fc, clear data/cache for the app) + a few sammy updates (NOTHING MAJOR FROM 4)
V4 changelog: updated ALL SAMSUNG APPS, added samsung members, samsung flow, reminder app, added media ui sounds for rom, Galaxy themes fixed, briefing tab in Bixby working, bootscreen, few edits in build prop.
V3 changelog: updated touchwiz, calendar, clock app, s8 ringtones & media, calculator, phone app, shealth root fix, etc from S8 port base.
V2 changelog: NewStuffAddons is now built in, debloated system, s8 lockscreen, more stock features in stock mms app, no fc for device maintenance (smart manager), 3mini battery/clock, etc.
V1 changelog: Stock Deodexed
Credits:
@SuperR. for the rom kitchen and his ongoing support
@topjohnwu For Magisk root"
@tdunham for deox rom
@Jacobh25 for S8 apps, etc
SlidderG3, MorganTaylor, and others for troubleshooting and help
For discussion and updates join https://telegram.me/n7ton920p
“I don’t always drink, but when I do, I prefer dark liq”
https://www.paypal.com/cgi-bin/websc...=QJDY6W6PGBEAJ

Reserved
RESERVED

Everything is working great. I dirty flashed, though, being on QC5 already is why I did. Saved time from setting everything back up again.

Yuwei01 said:
Everything is working great. I dirty flashed, though, being on QC5 already is why I did. Saved time from setting everything back up again.
Click to expand...
Click to collapse
Glad to hear, yea if you are already on nougat, i usually only wipe /system in twrp since im flashing another system that way all my settings still there and its a lil cleanier to me. But lemme know how battery life is after a day or 2.

your file only 137 kb
SM-G928P_QC5_Deodexed_v1.1.zip"]SM-G928P_QC5_Deodexed_v1.1.zip
your file only 137 kb， i can not download your file in china ,can you upload it to mega or google drive

@bihailantian655
They are both on mediafire. They are 1.65GB and 70mb for the addon
Others have it downloaded already (the links are good, i just rechecked them) , try refreshing? Or redownloading.

thank very much. testing

l have tried two different pc and two vpn. :crying:137kb :crying:

Just Curious?
Do you think there's a possibility of something like this being ported over to the standard galaxy s6 (SM-G920P). I just happened to stumble upon this while doing some google searches.

even i have flashed the 70m file still .can not use data and shealth

AlienMerc said:
Do you think there's a possibility of something like this being ported over to the standard galaxy s6 (SM-G920P). I just happened to stumble upon this while doing some google searches.
Click to expand...
Click to collapse
I doubt it, though you could try, ive never messed with s6 Devices 920P.

Question to OP or anyone who would like to give feedback: If I Backup my Stock-Rooted(SU) in TWRP, then decided to use this ROM, and then also Backup this Rom. Should there be any issues on going back and fourth between the 2? Thanks in advance to anyone willing to give me feedback on this!

SprintBama said:
Question to OP or anyone who would like to give feedback: If I Backup my Stock-Rooted(SU) in TWRP, then decided to use this ROM, and then also Backup this Rom. Should there be any issues on going back and fourth between the 2? Thanks in advance to anyone willing to give me feedback on this!
Click to expand...
Click to collapse
No I didn't have any issues when I'd swapped backups. :good:

Custom Rom QC5
Yuwei01 said:
Everything is working great. I dirty flashed, though, being on QC5 already is why I did. Saved time from setting everything back up again.
Click to expand...
Click to collapse
Do I have to be rooted to flash this ROM ? I am on Stock QC5 .
Thanks.

Mulzac said:
Do I have to be rooted to flash this ROM ? I am on Stock QC5 .
Thanks.
Click to expand...
Click to collapse
Yes, if you install twrp without rooting with the Magisk-v12.0 zip. Stock recovery will replace twrp recovery at least it did for me. If you try to install this Rom without root in twrp I believe your get a not rooted error. You could try it? And also that Rom is prerooted FYI.

Is there a way to add Avatar for sent messages? I tried frash install and still no luck
Great Rom, Thank you!

SM-G928P Custom NougatFirmware G928PVPU3DQC5
drewiskee said:
RESERVED
Click to expand...
Click to collapse
I flashed the ROM and everything is working great, but how do I get rid of Sprint Hands Free Activation in the installed GT Idoneapps.
When I click on Samsung DM Manager all I get is :" idoneapps is granted super user rights. No permissions to enter OMADM Hidden menu"
Thanks Again .......great rom

Mulzac said:
I flashed the ROM and everything is working great, but how do I get rid of Sprint Hands Free Activation in the installed GT Idoneapps.
When I click on Samsung DM Manager all I get is :" idoneapps is granted super user rights. No permissions to enter OMADM Hidden menu"
Thanks Again .......great rom
Click to expand...
Click to collapse
what are you trying to do exactly?
Maybe that will help me. I clicked it and it said the same for me

So far so good. Is there any way to disable the data usage stats on pull down? I have unlimited and don't need it. It will just bug me. Thanks a bunch
EDIT: I figured this one out myself. I am including the change in case anyone else wants the data stats removed from quick settings.
1) use ES File explorer or another root explorer.
2) copy others.Xml from "system/ csc"
3) change permissions (not sure if needed but just to be safe)
4) edit others.xml. Near bottom are the new entries for mod and I just changed <CscFeature_SystemUI_SupportDataUsageViewOnQuickPanel>FALSE</CscFeature_SystemUI_SupportDataUsageViewOnQuickPanel>. Was originally true.
5) copy over the existing file
6) reboot
7) profit.
Thanks for Rom. can't wait to get it just the way I want.

drewiskee said:
Glad to hear, yea if you are already on nougat, i usually only wipe /system in twrp since im flashing another system that way all my settings still there and its a lil cleanier to me. But lemme know how battery life is after a day or 2.
Click to expand...
Click to collapse
The Rom hasn't had a battery drain impact in anyway for me. Thanks again it's running buttery smooth.