Develop Bugs

XDA IIs Wifi and lockups

Does anyone have a problem with their wifi locking up their xda iis? I have bought a linksys router and am getting frequent lockups when using wifi. I am using the shipped O2 rom, thanks

I have no problem at all with Netgear router. Try changing the connection speed setting in the router to the "b" mode only. Hopefully this can solve your problem.

No problems here either I'm afraid. I'm using a Draytek Vigor 2600VG at home and at work there are two of us with XDA IIs using a Linksys BEFDSR41W wireless router and no problems there either.
Sorry! :-(
Try a hard reset (gulp!) and see if you still have problems (Without anything else installed that might be inteferring) otherwise might be a faulty unit perhaps.
--Neil

I second what xanth said, I had the problem where wifi would not turn on, so I hard reset and installed each software back individually the problem was Calligrapher 7.3 did not like being in Storage or Storage Card only in Main memory (go figure)

efjay said:
Does anyone have a problem with their wifi locking up their xda iis? I have bought a linksys router and am getting frequent lockups when using wifi. I am using the shipped O2 rom, thanks
Click to expand...
Click to collapse
I use the XDA IIs on a variety of wireless networks and experience problems with an alarming regularity. The most annoying is the fact that the top bar seems to loose functionality, when using wireless!!

I will actually add that I do seem to have problem with the "range" of WiFi.
I need to do more testing, but it doesn't seem to be more than 20m or so before have communication issues/timing out :-( Will have to find out what our walls are made of!!!

I have problems connecting sometimes. I regularly use three routers, Draytek, Buffalo and Belkin. The only time that it locks up is when using skype. The skype problem is a known issue with no cure.
Nigel

I am having a problem where my Siemens SX66 will loose connection to my Microsoft MN700 wireless AP on occasion. -It simply appears as if the Wifi radio shuts itself off.
Weird.....

Wifi has never worked for me. It simply doesn't work in the way nature intended.
The main problem (as far as I can tell) seems to be that it cannot get DNS or IP configuration settings from my router (Belkin 7630) automatically.
It can connect to my wireless network without any hassle, but that's about it. If I enter DNS and IP settings manually it works fine. But this is unworkable if you want to connect to another wireless network.
If I can't sort this out by next week I'm going to sell the unit on eBay. It's been nothing but a pain since I mistakenly bought it in December.
Wifi is a nightmare on this device! I'm going back to Nokia.

I am going to do a hard reset and test to see if i still get any freezes. Anyone know of any software i can use to backup my text messages?

WiFi
Hi guys,
Haven't had too many issues with WiFi over here - standard O2 Asia ROM (with the BT 3500 update).
I'm running a Netgear WG602 @ home with 64bit WEP and a Dlink AP2100 @ work with WPA-PSK. No connectivity problems at either location, both DHCP. It does however take a few minutes to connect, but this is on the odd occasion.
The only frustrating thing with the WiFi is that I have to soft-reset often to turn Wi-Fi on - any ideas? Hopefully O2 will fix this in the next ROM. Other than that, I've had the Nokia 9500, P900/800 and this is by far the best device for the power user.
Just me 2c!
Cheers
cK

Wifi is on all the time on my device, sometimes when I switch the device on while within range of an AP it does not connect. Often switching wifi off and then onn again causes it to connect. If this does not work then I can often go into the network dialogue section, and see the network marked as 'availble' but not connected (why it sometimes does not auto connect I dont know). Tapping connect usually cures. If that does not work then I too need to soft reset.
I hope like you that they fix this cause its damned anoying. I will be interested to see what the Benq P50 is like when its released. I shall get one from expansys to test and ship it back within the 7 days.
Nigel

As for those having problems with specific access points. It is not nessesarily the fault of the blue angel. It seems to me that none of the manufacturers of wireless kit understand the term 'standard' they all seem to have their own take on it, which is why kit from different manufacturers refuses to talk to each other. I am of the opinion that they do it in purpose to lock you into using their client cards with their AP's !!
Try it with some non Belkin kit and see what happens.
Nigel

Well i tried a hard reset and didnt install any apps and tried connecting to wifi again and still got a lockup and loss of connectivity. Im going to swap the router for another make and see what happens

Swapped my linksys router for a D-Link and so far no problems after 2 days. so looks like my problem was my router.

Swapped my linksys router for a D-Link and so far no problems after 2 days. so looks like my problem was my router.

XDA IIi and wifi
I just bought one of these and can't get it connected. I have a netgear wg602 access point. When I finally figured out how to set the IP manually (the 02 xda tech support said it can't be done - maybe they're right ;-)
I now have it saying it's connected, with right IP address. My DNS and gateway are set up for the wireless adapter in network adapters. The signal is average. The XDA says wifi is connected. The access point even says it's authenticated and associated - same as my other stations.
Only problem is, internet explorer doesn't find any web pages - says "The page you are looking for cannot be found" (works fine through GPRS)
Also, terminal services times out trying to connect to an internal IP address (to eliminate DNS as a problem)
So, anyone know how I troubleshoot network problems - it looks like a TCP/IP issue? Can't find ping or arp etc. I've also tried an IP address that I know works on the network.
thanks for any help
Dave

Hi
For ping, ipconfig and stuff, head to http://www.cam.com/windowsce.html
I have had multiple issues trying to get wifi working reliably. It still fails now, but there are a few tricks to get it working again. Most of my wifi issues have been due to regular use of three AP's [email protected] and [email protected] along with GPRS and VPN.
To start with I suggest setting all the ****e in connections (internet and home network to 'My ISP' then goto your wifi setup, network adapters, and tell it that the wireless card connects to the internet. Now, tap ok, and goto tools, network cards, tap the active connection (it must already be connected) and ensure that its set to internet.
Next soft reset the thing, and wait for it to connect to yr wifi. Now, use the ipconfig tool and ping tool from the above site to check that all is OK. Check that its got the default gateway right and a sensible LAN IP.
I have found on occasion that I can be connected via wifi, but that the device is still trying to talk using an old IP allocated by gprs which means nothing to my lan! IPconfig will show if all is OK.
Whoever wrote the whole of the networking system (and its terrible gui's) on windows mobile wants shooting. I usually have 2 VPN profiles setup under my work network. If I leave it set to that, and use wifi from my lan to connect to the internet all is fine. However if I try and access a local server, the damned thing starts trying to connect a vpn (it aint inteligent enough to work out that the IP I asked it to connect to is local).
I have been trying to find a setting for all this networking rubbish that allows me to do *everything* without reconfiguring each time - to no avail.
Another thing to note is that you cant send/receive MMS messages while wifi is connected (more stupidity), it tries to connect to the MMS server using the wifi connection, and the telco blocks it cause it wants to charge you for sending MMS over GPRS. Only solution is to disconnect wifi, send MMS then reconnect wifi!!!
Nigel

No problems with WiFi for me
Hmm I'm using an O2 Asia Rom as well.. and my wifi manager seems to automatically create "settings" for each AP it detects and I seem to have no problems connecting at all... been using WiFi around my house since the first day i got it..
i am using a Linksys Wireless 802.11b router..
btw I am new here.. finally able to register!
How's everybody doing?

Cannot turn off IEEE 802.1x
Has anyone had problems unchecking the 'IEEE 802.1x netwrok access control' checkbox???
I uncheck it, but then when I go back to the screen (click on the connection | then select 802.1x tab at the bottom) it has checked itself again!
The XDA IIs does not save the setting - it just keeps re checking itself 02 help have been no use - they sent me an instruction manual and it even says in one of the step 'uncheck IEEE check box'
Im am using a netgear wirelesss router and have also tried on a d-link
Sugestions - is anyone else having this problem??

Connected ti WiFi router, but IE not connecting to Sites

Hey guys, I just recently got my Softbank and upgraded to WM6 this morning. All is good except for my WiFi. The phone is able to connect to my router but when I try to go to sites with IE it gives me this error:
"THe page cannot be displayed or downloaded because connection was lost. Check the connection and try again"
Sites show up fine with EDGE, but IE does not show sites via WiFi. Router even shwos the phone connected to it and that an IP is assigned.
Excuse my ignorance, I am new and any help and advice is greatly appreciated.

Try this ...
kman79 said:
Hey guys, I just recently got my Softbank and upgraded to WM6 this morning. All is good except for my WiFi. The phone is able to connect to my router but when I try to go to sites with IE it gives me this error:
"THe page cannot be displayed or downloaded because connection was lost. Check the connection and try again"
Sites show up fine with EDGE, but IE does not show sites via WiFi. Router even shwos the phone connected to it and that an IP is assigned.
Excuse my ignorance, I am new and any help and advice is greatly appreciated.
Click to expand...
Click to collapse
Click-start>settings>connections tab>wi-fi>network adapters>
make sure your ieee 802.11b/g compatible wi-fi Ad....is connecting you to "The Internet" and not "Work." Cheers

Thanks for the reply. I verified that, checked it and double checked, but I'm still getting the same error. Are there other settings I need to change or look at?

Check these as well...
kman79 said:
Thanks for the reply. I verified that, checked it and double checked, but I'm still getting the same error. Are there other settings I need to change or look at?
Click to expand...
Click to collapse
start>settings>connections>wi-fi:
1. Click on your wirless SSID which should say connected.
2. Make sure it says connected to the internet.
3. Select the "This is a hidden network."
4. Make sure all of your keys/passwords are correct.
start>settings>connections>wireless LAN:
1. Make sure it is connected with good strength.
2. Verify It gave you an ip on the Advanced Tab.
3. Turn the Power Mode all the way up to Best Performance.
In your router verify you are not blocking or mac address filtering this connection. You might want to reserve the IP address for you device MAC.

kman79 said:
Thanks for the reply. I verified that, checked it and double checked, but I'm still getting the same error. Are there other settings I need to change or look at?
Click to expand...
Click to collapse
Worked for myself and others... http://forum.xda-developers.com/showthread.php?t=300887&page=5
(post #44)

I tried the settings and still no go. I'm using a Linksys router and I have it set up to where the router assigns the phone a specific IP. According to the router, the phone is connected and according to the phone, the phone is connected. Should the GPRS(EDGE) be active and connected at the same time? Cause it is, how do I manually disable it? I feel really stupid if this is why.
prodigalfish: Is that cab only for use with cingular network? I'm on tmobile network, so I'm not sure if I could use that cab. I will do a hard reset though, haven't tried that yet.

Yes It does matter....
kman79 said:
I tried the settings and still no go. I'm using a Linksys router and I have it set up to where the router assigns the phone a specific IP. According to the router, the phone is connected and according to the phone, the phone is connected. Should the GPRS(EDGE) be active and connected at the same time? Cause it is, how do I manually disable it? I feel really stupid if this is why.
prodigalfish: Is that cab only for use with cingular network? I'm on tmobile network, so I'm not sure if I could use that cab. I will do a hard reset though, haven't tried that yet.
Click to expand...
Click to collapse
TURN IT OFF!!!
Inside of activesync you must tell it allow wireless / data connection. If you press and hold the hangup red button the GRPS connection will drop. You can also turn it off in the comm manager.

Did you ever solve this problem as I am having exactly the same the one.
1. Wifi works fine, can transfer files over the network, Skype connects etc
2. Only PIE (PIEPlus) does not connect to web pages.
I have done everything mentioned here. Hmm

Wam7 said:
Did you ever solve this problem as I am having exactly the same the one.
1. Wifi works fine, can transfer files over the network, Skype connects etc
2. Only PIE (PIEPlus) does not connect to web pages.
I have done everything mentioned here. Hmm
Click to expand...
Click to collapse
My guess is that the version of PIE you are using (or PIEPlus) has a hard-coded proxy address that your device cannot reach. I use Opera myself, works much better than PIE (IMHO).
John

Have you tried changing the authentication to Shared instead of Open?
This worked for me.

I have the same problem with these newest roms, just after set up 3G connection(Softbank by using ConnSBM).
It worked fine with roms before 5/15th.

htc wifi router installed, now internet not working

I got the htc wifi router working and surfed for a few minutes. I logged out of my PC and back in and the internet wouldnt work on my PC or my phone. I rebooted my phone and still the same problem. Has anyone else run across this problem? How do I fix it/troubleshoot it? 3G is showing it is connected

Has anyone else had this problem? I had to finally do a hard reset/wipe to get things working again.

There's another similar report here, maybe in the cdma area.
I'm not clear on your issue. Is this wmwifi not working after a reboot or Activesync not recognizing after the reboot?
And are you using the latest wmwifi?
edit: I'm adding that I downloaded the latest wmwifirouter last friday 18sep09, and I thought it was a vpn/wifi issue on my laptop. My TP2 did not recognize under activesync after I did a few things, but WM did work the one time I tested it.

I am not using wmwifi. I am using HTC CM Internet Sharing:
http://forum.xda-developers.com/showthread.php?p=4170499#post4170499
I figured it was put out by HTC (and free) so it should work right?
It created the wifi access point fine, and I was able to surf with my laptop at good speeds. I left and came back and the internet would no longer connect (laptop or phone).
I tried everything from soft rebooting, to removing the application, to calling *228 (reset the phone), and even manually setting up the verizon data settings. Nothing worked. I just could not establish a data connection.
Finally I gave up and did a hard reboot and restore and it finally worked.
I really need a reliable way of setting up a wifi access point but dont want to risk this fiasco again.

Yeah, I mis-read your first post, sorry!

For me it was as simple as starting the wifi router program and then cleanly stopping it. If forced to quit, you will have no network access. It's happened a couple times for me.

jbass350z said:
I got the htc wifi router working and surfed for a few minutes. I logged out of my PC and back in and the internet wouldnt work on my PC or my phone. I rebooted my phone and still the same problem. Has anyone else run across this problem? How do I fix it/troubleshoot it? 3G is showing it is connected
Click to expand...
Click to collapse
Hi there, I had used htc wifi router a while back and hadnt tried connecting the phone to the local wifi network since. After reading your post, I thought I'd check and yes I was getting the same problem, i.e. it wouldn't connect to my home wifi network.
I found the fix to be as follows:
1) Go into comms manager, turn WiFi on
2) Under settings go to wireless LAN
3) In the main tab you will that the SSID is set to "Mobile router", select change network button underneath.
4) Now you should see the SSID of your network, dont select anything, just press o.k at the top and hey presto it will connect.
Let us know if this worked.

billu said:
Hi there, I had used htc wifi router a while back and hadnt tried connecting the phone to the local wifi network since. After reading your post, I thought I'd check and yes I was getting the same problem, i.e. it wouldn't connect to my home wifi network.
I found the fix to be as follows:
1) Go into comms manager, turn WiFi on
2) Under settings go to wireless LAN
3) In the main tab you will that the SSID is set to "Mobile router", select change network button underneath.
4) Now you should see the SSID of your network, dont select anything, just press o.k at the top and hey presto it will connect.
Let us know if this worked.
Click to expand...
Click to collapse
Thanks. I couldnt connect to the internet through 3G either though, even though the 3G icon was showing in my status bar.

jbass350z said:
Thanks. I couldnt connect to the internet through 3G either though, even though the 3G icon was showing in my status bar.
Click to expand...
Click to collapse
Ah, that's probably for some other reason, no issues with 3G connection for me.

Same problem for me. I connect to the mobile through wifi (Adhoc connection) and the mobile is connected in 3G but I can't surf internet from my laptop.

Enable DHCP
Hi all
Sometimes after using this software you need to renable DHCP in the connections settings. This can be done via:
Start>Settings>Connections>WiFi>Wireless Networks>Network Adaptors>NE2000 Compatible Ethernet Adaptor and then select Use server-assigned IP address.
Cheers
andrew-in-woking

hi i installed e htc wifirouter but it is using my mms setting instead of my phone internet setting. any1 can help?

[Q] Strange Wifi Problem after Simcard change

Hello folks,
since yesterday i have a strange Wifi Problem:
I'm running a WPA2 Wifi which runs perfectly till yesterday.
I was using it with the
desire for more then 2 weeks now.
I see myself "online" with the small Wifi Icon with full power wifi, i can ping and connect to other pc's and macs on my network but if i want to get to the outside behind my router, everything is dead.
I can see the connection request for google in my router for the desire, also i can see that the access is granted, but i get no answer. The router was not changed.
First i thought of a DNS Problem and pinged www google com (removed the dots because i am a new user) from a terminal.
No answer. I pinged the ip of www google com (removed the dots because i am a new user), still no answer.
On my PCs this worked.
i can ping anything in my network, even the router so this should not the problem, but when it gets outside the router no response.
I have searched the xda up and down and did't find something which could met my criteria.
I'm using Pays Rom 1.3 if someone want to ask.
I'm on static ip addresses and yes the desire and the router are on the same network and netmask
What did i change yesterday?
I switched to a new Simcard from the same provider. Had to type the login data for google and everything worked, i thought. Till i tried Wifi today.
If i use Edge there is no connection problem, but if i am at home i want to use wifi.
Any suggestions?
Thank you in advance!
Greetings da_druck

Problem Solved!
I tried different things like removing the wlan on my phone and adding it back up.
Adding a different dns-server, restarting the phone, etc.
This all doesn't solved the problem, and i thought it could be no problem with the router, as all the other pc's could connect to the net.
BUT i thought i should try to reboot the router itself, just to test everything and what shoud i say: Its working again. So it was no android problem.
Maybe the router was a bit upset for running for more then 6 weeks without reboot, i don't know. So this can be closed
Greetings
da_druck

having wifi issues

been having trouble with wifi connecting. It was working fine... i decided to give a different rom a try (express 3.61 landscape). i couldnt get wifi to work and there were a couple things i didnt really care for, so i switched back to my energy 2/6/12 with anthrax kernel and still not connecting to wifi... well thats only partially true. I have a linksys WRT54GS2 router and i use CISCO NETWORK MAGIC to manage/monitor my network. When i try to disable the network lock to add my phone back in it just keeps searching and never finds it, but my phone will be connected to my network. As soon as I cancel the scan it drops the wifi connection. I even tried using WPS with no luck. Do you think it has something to do with updating my PRL and profile while on the Express rom? this is really annoying me.

UPDATE: I've been playing around in my routers configuration utility and i got this figured out. I jsut couldnt do it with in Network Magic. Ill post my steps incase anyone had this same issue:
1. open web browser on pc enter you address to get into your router(this is usually 192.168.1.1 on linksys routers)
2. leave the user name blank and type admin in the PW section(unless you changed it when you did setup)
3. Go to the "wireless" tab
4. Then goto "wireless MAC filter" subtab
5. click edit mac filter list button
6. get your phones mac address( menu\settings\about phone\hardware information
7. enter phones mac address into an open slot then click save settings at the bottom of the page. then save the changes in the router setup.
It may vary some for different routers but this worked for me... WHAT A PITA!