Hi. I'm a fun of yours work on Samsung Wave. I come here to ask if is possibile to create a program that automatically delete the gps+ data.
I have the JL2 unofficial fw on my Wave and I checked that, without a manual delete data + gps, they are not downloaded. It 's always necessary, any time, enter the secret menu (*#4097*4097#) and manually delete the data.
It would be possible to build a tool able to do this procedure automatically and, perhaps, start Route66 in the same time. In short, do everything with one click. With this settings the fix of our Wave will be always in the order of time of 20-30 seconds. It's possible in yours opinion?
Why do you need to delete any data? I've installed Sygic and i get a lock after about 10-20 sec ....
pockobg said:
Why do you need to delete any data? I've installed Sygic and i get a lock after about 10-20 sec ....
Click to expand...
Click to collapse
Is difficult to explain the situation. I use Ruote66 and fw JL2. I haven't a flat plan on phone and I use wap configuration. I think isn't a problem of Ruote66 but of the internal settings of gps. In my case, if I don't used the gps from a week, the fix is slow (12 min). I have active gps+ but the download doesn't run automaticaly if I delete gps data.
Nezmanpro said:
Is difficult to explain the situation. I use Ruote66 and fw JL2. I haven't a flat plan on phone and I use wap configuration. I think isn't a problem of Ruote66 but of the internal settings of gps. In my case, if I don't used the gps from a week, the fix is slow (12 min). I have active gps+ but the download doesn't run automaticaly if I delete gps data.
Click to expand...
Click to collapse
So this is a problem for Route66? Why dont you try Sygic?
pockobg said:
So this is a problem for Route66? Why dont you try Sygic?
Click to expand...
Click to collapse
Becouse I buyed Route66. I want use it and not another software.
Question: Can you give me the fw in your Wave and the setting in secret menù of gps (*#4097*4097#)? My interest is for "gps type" and the value of "time - out" in the "application settings". Thanks
Time out - 60000
GPS Device-Type - HYBRID
I found that setting a timeout to 1000 worked a little better but effectively deleting the data gets it going more quickly. That is after setting up the system correctly in the first place.
Sent from my Hero using Tapatalk
duxxyuk said:
I found that setting a timeout to 1000 worked a little better but effectively deleting the data gets it going more quickly. That is after setting up the system correctly in the first place.
Sent from my Hero using Tapatalk
Click to expand...
Click to collapse
I use this settings:
gps mode: standalone;
gps option: location+ velocity + altitude;
session type: tracking mode;
gps device - type; build - in;
data receive..: All;
time out: 60000 (change to 1000);
Horizzontal Accuracy: 1000;
Vertical Accuracy: 500;
I tryed to use the hybrid type of gps, but my apn doesn't support traffic of data. So I set built - in and it's ok if I delete gps data. Now, the most rational solution is waiting a new fw that, perhaps, will solve this problem but my idea is easy and can give to all those who use route66 an immediately solution.
So, there is anyone that can realise this application? Is possible?
Here's how I got mine working correctly. (effectively I finish with Nezmanpro's settings as well)
1. Dial *#4097*4097#
2. Choose 3-User setting
3. Choose 1-Assist Method Type then select AGPS. System will reboot.
4. When the phone boots and returns to idle mode (after entering pin and checking the SD Card) dial *#4097*4097#.
2. Choose 3-User setting
3. Choose 2-SUPL Setting and set the options as below
Use AGPS or NOT = On
MT-Auto Configuration = Off
SUPL MT-Response Type = Accept
Server Address Type = IP_ADDRESS
Server FQDN Type = Custom Config (this was originally BMC LIVE TEST )
SUPL Secure Socket = Off
Server IP Address = 74.125.77.192
Server Port = 7276
I then go back up to "Server Address Type" and set that to "HOST_NAME". I can then set Server Custom FQDN = supl.google.com
I think there's a bug here as the port should also be available when using a host name - when choosing host_name the port field is locked, that's the reason behind going back up and changing the "Server Address type".
Save this. then go into 4-Network Profile
4. Set the network to the one you use for your internet access, not the mms.
5. Check that in the PDR Setting all is checked.
6. Go back to the main menu of LBS Application then select 2. Application Setting
7. Set the following options:
GPS Mode = A-GPS CP Based
(See the following post for further info http://forum.xda-developers.com/showthread.php?t=729118)
GPS Option = Location+Velocity + Altitude
Session Type = Tracking Mode
GPS Device-Type = HYBRID
Date Recieve Type = All
Time Out = 1000 (like Nezmanpro)
Horizontal Accuracy = 100
Vertical Accuracy = 500
8. I then go back into User Setting
9. Back into Assist Method
10. Set Assist Method Type = GPS+
System will restart
11.When the phone boots and returns to idle mode (after entering pin and checking the SD Card) dial *#4097*4097# to get back to the LBS Application.
12. Go back into 3-User Setting
You'll see that SUPL settings are no longer present.
13. Go into GPS+ Setting and check that Auto Download = Enabled
14. Go back to the LBS Application menu then 6- DELETE GPS DATA
16. Happy navigation. Phew
duxxyuk said:
Here's how I got mine working correctly. (effectively I finish with Nezmanpro's settings as well)
1. Dial *#4097*4097#
2. Choose 3-User setting
3. Choose 1-Assist Method Type then select AGPS. System will reboot.
4. When the phone boots and returns to idle mode (after entering pin and checking the SD Card) dial *#4097*4097#.
2. Choose 3-User setting
3. Choose 2-SUPL Setting and set the options as below
Use AGPS or NOT = On
MT-Auto Configuration = Off
SUPL MT-Response Type = Accept
Server Address Type = IP_ADDRESS
Server FQDN Type = Custom Config (this was originally BMC LIVE TEST )
SUPL Secure Socket = Off
Server IP Address = 74.125.77.192
Server Port = 7276
I then go back up to "Server Address Type" and set that to "HOST_NAME". I can then set Server Custom FQDN = supl.google.com
I think there's a bug here as the port should also be available when using a host name - when choosing host_name the port field is locked, that's the reason behind going back up and changing the "Server Address type".
Save this. then go into 4-Network Profile
4. Set the network to the one you use for your internet access, not the mms.
5. Check that in the PDR Setting all is checked.
6. Go back to the main menu of LBS Application then select 2. Application Setting
7. Set the following options:
GPS Mode = A-GPS CP Based
(See the following post for further info http://forum.xda-developers.com/showthread.php?t=729118)
GPS Option = Location+Velocity + Altitude
Session Type = Tracking Mode
GPS Device-Type = HYBRID
Date Recieve Type = All
Time Out = 1000 (like Nezmanpro)
Horizontal Accuracy = 100
Vertical Accuracy = 500
8. I then go back into User Setting
9. Back into Assist Method
10. Set Assist Method Type = GPS+
System will restart
11.When the phone boots and returns to idle mode (after entering pin and checking the SD Card) dial *#4097*4097# to get back to the LBS Application.
12. Go back into 3-User Setting
You'll see that SUPL settings are no longer present.
13. Go into GPS+ Setting and check that Auto Download = Enabled
14. Go back to the LBS Application menu then 6- DELETE GPS DATA
16. Happy navigation. Phew
Click to expand...
Click to collapse
Ok. But you must always manually delete gps data after this operation? I Knew that this operation was for functionally to have more speed to data download but my problem doesn't solve, becouse you must always delete gps data. Or not?
In order to get a fix quickly - ahem - in less than 3 minutes I need to delete the gps data.
Compared to a HTC hero I have the impression that the phone has no A in GPS.
the HTC hero locks in under 30 seconds the wave in under 3 minutes.
duxxyuk said:
In order to get a fix quickly - ahem - in less than 3 minutes I need to delete the gps data.
Compared to a HTC hero I have the impression that the phone has no A in GPS.
the HTC hero locks in under 30 seconds the wave in under 3 minutes.
Click to expand...
Click to collapse
An application that auto deletes the gps data would fix this problem.
So the Wave does not use network assisted GPS? Then those Application settings in the GPS menu do not make sense other than the Standalone mode?
bsbharath1987 said:
So the Wave does not use network assisted GPS? Then those Application settings in the GPS menu do not make sense other than the Standalone mode?
Click to expand...
Click to collapse
Having deleted the gps data this morning. I put the phone in 3G mode... gps lock in under a minute... I think YES the phone is capable of being assisted it's just that Samsung appear to have completely misconfigured and have forgotten to implement the gps data timeout :-(
definitely not something that would get past Steve Jobs....
i think we have nothing to do untill now except waiting a new firmware fixing this
Related
Having problems getting on the internet. Does anyone have an Optus ROM or the settings required to get this phone working on the net....thanks Hugh
perthbar said:
Having problems getting on the internet. Does anyone have an Optus ROM or the settings required to get this phone working on the net....thanks Hugh
Click to expand...
Click to collapse
enable auto config... under settings connection / advanced network...
mine works without any extra settings...
but i'm sure gprs /3g settings are on optus' mobile homepage
Hi
I experienced a similar problem with my Diamond I purchased on the weekend. It was a Telstra NextG model that was supposedly unlocked and able to work on all networks.
It worked with my Optus SIM as a phone but I couldn't get any Internet connectivity.
I ended up flashing it to a cooked ROM which auto-detected the Optus SIM on first boot and configured itself automatically. Internet is now working without problem.
FYI I'm now using "Dia Druitt v05" ROM and am very happy with it. Original ROM version was 1.38.
Battery life is not great but I have just changed the radio from .06 to .bs14 and will see if that makes any difference.
Cheers
Loki
loki429 said:
Hi
I experienced a similar problem with my Diamond I purchased on the weekend. It was a Telstra NextG model that was supposedly unlocked and able to work on all networks.
It worked with my Optus SIM as a phone but I couldn't get any Internet connectivity.
I ended up flashing it to a cooked ROM which auto-detected the Optus SIM on first boot and configured itself automatically. Internet is now working without problem.
FYI I'm now using "Dia Druitt v05" ROM and am very happy with it. Original ROM version was 1.38.
Battery life is not great but I have just changed the radio from .06 to .bs14 and will see if that makes any difference.
Cheers
Loki
Click to expand...
Click to collapse
HI Loki
Can you explain how you did this by Dia Druitt v05 ROM...I have the same problem...I can call and SMS but now internet activity / MMS...dont know what to change on the phone...thanks for your help
You should be able to download the optus/vodafone rom from HTC using the Telstra Next G diamond serial without any issues.
Otherwise, here are the steps to manually input them:
For Internet:
1. Tap on the Start button.
2. Tap on Settings.
3. Tap on Connections.
4. Tap on the Connections Icon.
5. Tap on Add a new modem connection under My Work Network.
6. Enter Optus WEB in the Enter a name for the connection field.
7. Select Cellular Line (GPRS) in the drop down list of Select a modem.
8. Tap Next.
9. Enter internet in the Access point name field.
10. Tap Next.
11. Enter in the User name field or otherwise leave it blank.
12. Enter in the Password field or otherwise leave it blank.
13. Tap Advanced.
14. Select Use server-assigned IP address.
15. Tap OK.
16. Tap Finish.
for some pdas it is compulsary to set proxy for internet connetion if so in step 9 instead of "internet" put "wap.optus.net.au" and for proxy setting put "202.139.83.152" and port "8070".
For MMS:
1. Tap on the Start button.
2. Tap on Settings.
3. Tap on Connections.
4. Tap on the Connections icon.
5. Under My ISP, tap on Add a new modem connection.
6. Enter Optus MMS in the Enter a name for the connection field.
7. Select Cellular Line (GPRS, 3G) in the drop down list of Select a modem.
8. Tap on Next.
9. Enter mms in the Access point name field. Tap on Next.
10. Enter in the User name field.
11. Enter in the Password field.
12. Tap Advanced.
13. Select Use server-assigned IP address. Tap OK.
14. Tap Finish.
15. Tap OK.
16. Tap on Settings.
17. Tap on Messaging.
18. Tap on Menu which is located at the bottom right corner.
19. Tap on MMS Configuration.
20. Under Servers, tap on New.
21. Enter Optus MMS in the Server name field.
22. Enter 61.88.190.10 in the Gateway field.
23. Enter 9201 or Permanent, non-secure in the Port number field.
24. Enter http://mmsc.optus.com.au:8002 in the Server Address field.
25. Select My ISP in the Connect via drop down selection.
26. Select WAP 2.0 in the WAP Version drop down selection.
27. Tap on OK.
28. Tap on Set As Default.
29. Tap OK.
If setting above doesnt work change the port address on step 23 to "8070" then try again.
PS. I just did a search on google for "Optus MMS settings" and copied and paste those instructions.
Optus Rom Update
I've got the same problem. My Touch Diamond is from Telstra, but I'm with Optus. I can send/recieve sms, but not mms.
Can someone post up the latest rom for Optus users? I can'd download it from the HTC website as the serial number on the phone will only download the Telstra one.
Hey guys, I'm really sorry to bring this up again (after all this time) but I'm having issues getting the optus mms to work and I can't for the life of my work out why. I'd tried using all the suggested settings and it still refuses to work (the mobile internet is and has been working flawlessly for some time now).
I was just wondering if any of you guys actually managed to get the mms working or if you all just ended up flashing with a cooked rom.
I have a verizon 6900 that I updated using NFSFAN's WM6.5 1.00 FINAL ROM and now I cannot get the internet to work. I went back to the factory 6.1 and was unable to even make calls, so I spoke with verizon and got the phone working but they were unable to get the internet working. I flashed the ROM with the WM6.5 1.00 again and ran a couple different provisions and I still cannot get the internet. Can someone please help.
Sorry it keeps asking for username and password.
internet
VZW can tell you the user name and password its something simple like vzw3g or something. If you have that setup correctly you may be in the same boat im in. I can not connect to the internet. I did a hard reset some time back and lost the ability to data connect. I contacted the vzw techies who could not solve the problem, went into the store who could not solve the problem, went back to the "techs" on the phone who could not solve the problem. They all said it was my software which I think is bs. The problem is not my software because my phone tries to connect to their network and I have no known software issues. It has to be on the network end where the network wont recognize my phone. I quit working on the problem because I dont use data right now anyways and was on a pay as you go data plan so it was vzw's financial loss that i can not use data.
This fixed my Verizon Phone
1) dial ##778, enter in 000000 for the password
2) copy the ESN(Hex) Exactly how it is(you need the caps)
3) click View Info in the lower left corner and click M.IP Settings
4) Change MIP_MODE to Simple IP Only
5) Click View Info again and goto Security
6a) HDR AN AUTH User Id = [email protected] (fill the 5's with your 10-digit number)
6b) HDR AN AUTH Password = (Your ESN(Hex) With CAPS)
6c) PPP USER ID = [email protected] (Same as above)
6d) PPP PASSWORD = vzw
I left DUN log on blank
Change settings under
7) Click OK in the top right corner and save and reboot.
Goto Start->Settings->Connections->Connections
9) Click Manage existing connections
10) Select Alltel Wireless and click Edit...
11) Click Next in the lower right cornder until you get to the user name and password screen
12a) Username is [email protected] (Same as above)
12b) Password is vzw
13) Click Finish in the lower right corner
14) Enjoy verizon wireless internet!
Also make sure you update your PRL to an verizon one.
Go to M.IP Default Profile.
Enable Profile: Enable
NAI: [email protected]
DUN NAI: leave blank
But know I cannot update my radio. This has been an issue since I unlocked my phone. I cannot get the bootloader to load from my 1 GB microSD. I am not sure what to do. XV 6900
I have had this problem for months now.I have tried everything possible. Called vzw i dunno how many time I dunno how many new A-keys I have had.I even tried these settings. Nothing seems to be workn.But who knows. Only way I can get internet on this phone is to manullay put my phone in 1x. which is way slow but it works
I got everything working great now. I ran the .40 unlocker and then flashed back to the factory ROM from HTC. I entered all of the setting back into the phone that I listed above and then flashed it again with the factory ROM. All of this put my phone back to factory. I then re flashed it with the 2.31 and was able to update radio and flash with the 6.5 ROM from SD card in phone.
Hi Guys I have not been able to enable data on my Epic 4G, calls, text function properly the only issue is data it just doesn't work. What can Fix it? Any help? Thanks
Wrong section
Sent from my SPH-D700 using XDA
Sorry, I forgot. Well I think I found the fix, It may help some people
Fixing Data Service
1- Download QPST
2- Get your own SPC Number Click Here & Enter Your MEID. That will be your key to unlock the phone and your password. Your MEID could be found at Settings->About Phone->Status ... it's all numbers
3- Got to Start-->All Programs-->QPST-->QPST Configuration.
4- Select your phone from the list (the phone should be in Debug Mode).
5- If you don't see your phone Click on "Add New Port" uncheck "Show Serial ....blablabla" and select the port and add it.
6- With your phone selected go to Start Clients-->Service Programing. Select the phone and click OK.
7- If a dialog came up telling you to retry click on retry.
8- Click on "Read from Phone" you will be asked for your SPC number to unlock the phone and get its information.
**** BE REALLY CAREFUL AFTER THIS POINT YOU COULD MISS-UP YOUR SERVICE AND FLASHING YOUR PHONE WILL NOT RESTORE THESE SETTING... SO TAKE EXTRA CARE FROM THIS POINT ON***
9- Go to M.IP tab and select profile 0 and edit your user name remove the "aaak." just for the first row.
10- Go to PPP Config-->Um change the user name (Your Phone#@mymetropcs.com) and insert your SPC as the password
11- Go to PPP Config-->An change the user name (Your Phone#@mymetropcs.com) and insert your SPC as the password
12- M.IP tab change the mobile ip behavior to: simple IP only (thanks to oscarher4)
Write to Phone (the phone should restart by itself)
13- Download "Network" Click Here, and install it.
14- Turn off your WiFi
15- Run the App and in the "Set preferred network type:" Select CDMA auto (PRL). Tap Turn off radio wait about 5 seconds and turn radio ON.
16-Make Sure Toggle DNS check is "Allowed"
Full Thread
http://androidforums.com/admire-all-things-root/454073-regarding-2-3-6-update-metropcs-solved.html
4g data connected but not able to surf the net
tichs said:
Sorry, I forgot. Well I think I found the fix, It may help some people
Fixing Data Service
1- Download QPST
2- Get your own SPC Number Click Here & Enter Your MEID. That will be your key to unlock the phone and your password. Your MEID could be found at Settings->About Phone->Status ... it's all numbers
3- Got to Start-->All Programs-->QPST-->QPST Configuration.
4- Select your phone from the list (the phone should be in Debug Mode).
5- If you don't see your phone Click on "Add New Port" uncheck "Show Serial ....blablabla" and select the port and add it.
6- With your phone selected go to Start Clients-->Service Programing. Select the phone and click OK.
7- If a dialog came up telling you to retry click on retry.
8- Click on "Read from Phone" you will be asked for your SPC number to unlock the phone and get its information.
**** BE REALLY CAREFUL AFTER THIS POINT YOU COULD MISS-UP YOUR SERVICE AND FLASHING YOUR PHONE WILL NOT RESTORE THESE SETTING... SO TAKE EXTRA CARE FROM THIS POINT ON***
9- Go to M.IP tab and select profile 0 and edit your user name remove the "aaak." just for the first row.
10- Go to PPP Config-->Um change the user name (Your Phone#@mymetropcs.com) and insert your SPC as the password
11- Go to PPP Config-->An change the user name (Your Phone#@mymetropcs.com) and insert your SPC as the password
12- M.IP tab change the mobile ip behavior to: simple IP only (thanks to oscarher4)
Write to Phone (the phone should restart by itself)
13- Download "Network" Click Here, and install it.
14- Turn off your WiFi
15- Run the App and in the "Set preferred network type:" Select CDMA auto (PRL). Tap Turn off radio wait about 5 seconds and turn radio ON.
16-Make Sure Toggle DNS check is "Allowed"
Full Thread
http://androidforums.com/admire-all-things-root/454073-regarding-2-3-6-update-metropcs-solved.html
Click to expand...
Click to collapse
Where I can get this app "Network"?
Some of those steps are placebo, and unnecessary. That will only get you 1x internet, and dependent on your location you may/may never get 3g to work they've been blocking off more cities from flashed phones from getting 3g..
Sent from my SPH-D700 using xda premium
Bada 2.0 S8500 GPS location Problem after Upgrade 2.0
Dear Friends,
i am facing problem in Location Service/GPS system my Bada S8500 after upgrade Bada 2.0. It's not working.
Please any one solve my problem...
If you just upgraded from bada 1.x to bada 2.0 and and now have problem with Navigation (Route 66), do this simple setting:
1. Setting => Location =>Location service (set it to on; i.e. green colour).
2. Back to main menu, launch "Navigation" (allow it to run for few seconds)
3. Then click on "More" (on Navigation menu) => Contents (download contents for Navigation, to sync your license; download maps; and download any other contents you have purchased e.g safety camera, etc).
4. That's all.
NB: In case your problem is not with Navigation (Route 66), please do well to explain in details what problem you are facing.
All setting is enable....
Actually i download foursqure application in my device. when i going to use 1 msg appear on screen..your loction could not be found. verify your gps setting and also the same problem with other apps.
asjad_shaez said:
All setting is enable....
Actually i download foursqure application in my device. when i going to use 1 msg appear on screen..your loction could not be found. verify your gps setting and also the same problem with other apps.
Click to expand...
Click to collapse
Normally when you install any location/GPS app manually, you need to also activate/include this app in the location service manually. Otherwise you will always receive the said error of 'Location service is disabled'
For Example, I installed the GPS Status app.
When I tried to start the GPS, it displayed error of 'Location service is disabled'.
Yes, even if I have enabled location service in my phone, but I have not enabled it for GPS Status app.
To solved this, I go to Setting => Location => Location service (already set to ON, if not, turn it ON),
then on same page/menu, scroll down to bottom of page where you will find your installed location/GPS app (in this example, GPS Status), and turn it ON.
Now go back and launch your location/GPS app, and it will no longer display the error. It will now work.
See screenshots below:
I've been working on a fix since a long time now. If you are in SD community then you prolly know me. Anyway I was able to fix this on two of my phones and it's now working fine. I tested for 12 hours now. I'll also tell you in the end what problems I'm seeing. I'm also working on a fix for that.
I noticed that a service is started when the fallback happens but if I kill that service the network also dies. But if you follow the below method it safely starts a new service which kills the one that's responsible for killing the 4G/LTE
1. Upgrade your phone to 13B firmware
2. Root 13B
3. Now download Shortcut Master lite app from play store.
4. Now add these shortcuts to your favorites in the "Shortcut Master lite app". You can search for "LTE" and click on search button
LTEBandSelection
LTETestMain
LTE System Selection
CDMAPreference
5. Now click on "LTEBandSelection" and enable all the bands
6. Save and reboot
7. You now need to enable your data and turn off your wifi. Make sure your phone is in Global mode (in settings >> Mobile networks >> System select)
8. After your phone is rebooted open "Shortcut Master lite" app.
9. Now tap on LTETestMain
10. Select Click on CDMA preference.
Now choose Band preference and select "any"
P_REV_Preference ---> "MOB_P_REV 3
This is important.. EVDO Revision --> Rev A
11. "LTE Connect w/o IMS PDN" must be checked
12. Now go back to your main menu in shortcut master lit app
13. This step is very important. Changing the timeout is important. Tap on LTE System Selection
Except "Scan duration" add a couple zeros to all the other timers. For eg: T_mpsr timer (Min) is 200
The fallback timer will reset itself after reboot. But don't worry the configuration is already updated with the new value. For some reasons the shortcut master lite app is not picking it up.
14. Now finally click on "CDMA preference" in the main menu and make sure it has the value you set in Step 10
At step 10 or 13 your network should go away and your phone should complain about "no network". That's fine. just ignore the message.
Now finally reboot your phone. That's it. You should now have 4G LTE and it won't fallback to 3G or H+
The only problem is when I'm on a call my 4G LTE is dropped to 3G/H+. But after I hang up it goes back to 4G LTE after 12 seconds. I don't know if it's an expected behavior. But I'm trying to see if there is a fix for that.
I tested this with Tmobile. Make sure your APN settings are correct.
Thanks @motorhead_biker., you rock!!!
I am on rooted 11a, flashing stock back and then will go to 13b to try this out. Was waiting for this.....
Isn't this thread a duplicate of http://forum.xda-developers.com/verizon-g4/general/guide-fix-vs986-dropping-to-3g-h-4g-lte-t3272434? Can they be consolidated?
Thread closed as there is already a copy in General and that is where it belongs.
Forum moderator,
matt4321