Related
Okay, lots of hx2000 users already flashed their roms, now facing the bugs:
# A2DP not working, please try this software. It might work for your IPAQ hx2000 series.
Attached Bluetooth Audio Router. Please give me reports if it works.
# Battery Drained Issue: Have you ever left your Pocket PC in your bag for the night and the next morning discovered that the handheld’s battery was flat?
ActiveSync
1) Go to Start> Program> ActiveSync> Menu> Add Server Source, under Server address put 1.1.1.1.
2) Tap Next (bottom right)
3) You’ll get three boxes to fill in: Username, Password, Domain. Fill in xxx in all, tap Next, Finish, Menu, Schedule
4)Peak times> change to manually
5) Off-peak times> change to manually
6) On top right click Ok
7) On bottom right click Menu> Options, on bottom middle click Delete, when you get the warning, click Yes.
You're all done. If you follow this fix correctly (as was originally stated above, it will almost always (as it would appear by others posts( fix the battery drain issue.
Messaging Accounts (Outlook Mobile)
Open up the messaging application. Tap Menu > Tools > Options > select the email account you wish to change, then tap Next > Next > Next > Options button. Remove the checkmark in the box next to "Connect and check for messages every xxx minutes." Then tap Next > Next > Finish.
Notifications
Tap Settings > Personal tab > Sounds & Notifications icon. Select the Notifications tab, and then tap the down arrow next to the Event dialogue box. Select the “Reminders” event and make sure "Repeat" is not checked.
Today Timeout
tap Start > Settings > Today icon > Items tab. Remove the checkmark next to “Today timeout” to disable the feature
HP Protect Tools
Do not use this, except you work for FBI and has lots of secret data.
Running Applications
Tap the Running Programs tab, select the application you wish to close, and tap the Stop button (or you can tap the Stop All button to close all running applications). Be sure all applications closed before turning off your IPAQ.
Power Setting
Pocket PC devices that are running Windows Mobile turn on at midnight to search for appointments for the coming day. Reminders are set and the Today view is updated with the day's events, thus on Battery power, turn off device if not used for 1 minute, Backlight on battery power: 30 seconds.
You can adjust whatsoever you want, the rule is turn off device > turn off backlight.
TODAY Plug-ins:
Better you uninstalled all today plug-ins thrid party progs.
Installed programs on SD/CF running in memory sometimes not respond after you turn on from automatic battery turn off.
It takes between 3-5 seconds to get response and/or sometimes program automatically closed by itself.
Solution: installed the programs in DEVICE.
Tips: Remove any unnecessary files in memory storage, so you will have more ROM memory storage.
After I turn on the device(2490b) from automatic battery turn off every time the backlight on battery power change to 10 seconds, no matter which setting I was choose. Until the device power off(auto or manually) the setting works, but after power on the setting change to 10 seconds again. Have anyone else this issue? Any solution?
dancer_69 said:
After I turn on the device(2490b) from automatic battery turn off every time the backlight on battery power change to 10 seconds, no matter which setting I was choose. Until the device power off(auto or manually) the setting works, but after power on the setting change to 10 seconds again. Have anyone else this issue? Any solution?
Click to expand...
Click to collapse
Uhmm strange, try to do clean reset whether the symptom disappear.
BT phone manager that you missed in wm6.0
extracted from WM5.0
Dear All,
Please pay attention that after making changes, installing new software or doing your usual software settings it is advisable to power off your device before soft-resetting.
Example, I recently setup my Inbox mail accounts and soft resetted my device in a usual way. After a soft reset I found out that none of my accounts was actually kept. So, I did setup again, powered off my device and soft-resetted it. After soft-reset all mail accounts were saved and were workable
To limit CPU Usage
1.Do the Activesync Fake server trick then turn all schedule to manual
To prevent Compaction
1.As much as possible free your program memory and install all programs in the SD of CF (if possible)
2.Move all cache to SD or CF (memmaid or SKtools can do this)
Registry: ActiveSync Manually
The above Activesync fix will also fix the problem many are having with not being able to turn on their WM6 unit.
JUST TO MAKE SURE ACTIVESYNC IS MANUALLY ACTIVATED:
You can also check the following registry entry:
[HKEY_LOCAL_MACHINE\System\ActiveSync\Engines\{176F 4FFD-F20C-4bd4-BDD7-01D0726C567B}\Settings] SyncAfterTimeWhenCradled (x)
Where x is one of the following:
0=Manually synchronize
5=5 minutes. Default value.
15=15 minutes
30=30 minutes
60=60 minutes
120=2 hours
240=4 hours
Here is real fix for A2DP problem on any custom hx2000 firmwares (e.g. 3.50, 3.52, WM6).
Download this cab file: Udillak_A2DP_Fix_for_hx2000_custom_firmwares.cab
Install it, make softreset and relax with working sound and controls of your bluetooth headphones.
Hello,
Since I've installed WM6 on my hx2790b it's great for everything but the PIM...
It's impossible to add a contact, an appointment, etc... It tells me "An unexpected error has occurred in this program." And it's impossible to synchronize the PIM with my PC
Any idea ?
Try to flash rom again, but you must do clean reset before (holding 1+power+3+ and stylus-reset). After successful update, u must do a clean reser again (on screen "formatting ps").
Synchronizing with PC, you must use the latest ActiveSync 4.5.
MightyBob said:
Hello,
Since I've installed WM6 on my hx2790b it's great for everything but the PIM...
It's impossible to add a contact, an appointment, etc... It tells me "An unexpected error has occurred in this program." And it's impossible to synchronize the PIM with my PC
Any idea ?
Click to expand...
Click to collapse
Calibrating your Battery
Read this:
http://h41206.www4.hp.com/webapps/IV3/adddoc.iv?locale=en_us&type=rep&prodSeriesId=349051&target=/NL_HW_IPG_iPAQ_common_EN_01_E/Resets/AllipaqsPoweIssuesBatteryCalibration.html&node=prodITRC/NL_HW_IPG_iPAQ_common_EN_01_E/N1|4|2|3&prodTypeId=215348&serverId=1
Calibrating your Battery
Power issues you may experience with your iPAQ over time:
* Unit fails to Power On
* Unit fails to charge 100% only holding 50% of the charge
Important: If you experience problems with power on your unit the fault may not be with the main battery. Swap testing the battery with a known good working battery may show the same fault. Calibrating your unit by running the 'Battery Calibration' test may resolve 'Power Related Issues'. You must follow the tests below exactly for good results.
1. Charge the unit for 30 minutes (No More, No Less) only powered by AC Adapter and 22-pin connector and not connected to the PC/Cradle (make sure the unit is switched/powered off).
2. Remove the power and full 'Hardware Reset' and then 'Soft Reset'.
3. Charge the unit again for 4 hours connected to ac power only. By following the procedure exactly as outlined in the steps above this will enable full calibration of the battery with the unit (make sure the unit remains switched/powered off during this charge period).
Note: After a software reset the power Leds (Light Emitting Diodes) should now be on and the battery should be showing 100%. If the unit still fails on power do the following checks:
*Test the AC Adapter at another location/power source.
*Swap test The AC Adapter if possible.
THIS WILL HELP BATTERY DRAINED ISSUE of WM6.0 in some HX2000 series; USING SKTOOL or MEMMAID:
1. KILL BioDtect in Windows Startup
2. Set Credant Manager in StartupService as MANUAL and STOP.
3. Set Standby into 24 Hr in Power Setting
4. Soft reset
5. DO NOT EVER EVER RECHARGE YOUR IPAQ USING USB in the CRADLE!!! RECHARGE YOUR IPAQ USING CABLE POWER SUPPLY ADAPTOR!!!
Bricked My Ipaq! hx2795... HELP!!
Hi,
I just got an Ipaq hx2795 and I upgraded to WM6, and it worked perfectly!. However, I saw a supposedly upgraded version of WM6 and i tried to install it, and too hastily I think. I did it without first removing my SD and CF cards. the upgrade said it went through ok on the PC, but it froze on the PPC, about halfway. ever since then, I've only been able to bring up the pda in pre-BL mode. Whenever I attempt to re-load any ROM (WM5 or WM6), I get the error message that the language of my current ROM is unknown and hence, the upgrade cannot go through. To further complicate my problem, I was trying to recover it about 3 nights ago and accidentally left the pda on all night in pre-BL mode. Now I think the battery is dead and I do not know how to charge it. Is there any resource or anyone that can help me with this problem? Is there a way to load the rom and Ignore the language setting on the Ipaq? What should I do now? HELP!!
Please let me know ASAP and Thanks!!
reggae,
You didn't follow step by step the flashing ROM procedure....please read it carefully...as written at: http://forum.xda-developers.com/showthread.php?t=329079
BEFORE FLASHING ROM: MAKE SURE IPAQ HAS BATTERY POWER ABOVE 80%
AFTER FLASHING ROM YOU MUST: CLEAN RESET AGAIN (FORMAT P.S.) and SOFT reset.
GOOD LUCK!
abbaml said:
reggae,
You didn't follow step by step the flashing ROM procedure....please read it carefully...as written at: http://forum.xda-developers.com/showthread.php?t=329079
BEFORE FLASHING ROM: MAKE SURE IPAQ HAS BATTERY POWER ABOVE 80%
AFTER FLASHING ROM YOU MUST: CLEAN RESET AGAIN (FORMAT P.S.) and SOFT reset.
GOOD LUCK!
Click to expand...
Click to collapse
Thanks for the assistance, however the flash keeps on saying that my pda's language is "unknown" and hence stops the upgrade as a result. What do i do about this?
Thanks
WM6 hx2795 and WiFi
Hello everyone,
I just came across this forum today, and was very happy to. I flashed my rom from wm5 to wm6 and definitely like wm6 more.
Now for my bug. I'm using an hx2795. Wi-Fi worked in wm5, now after I flashed the WiFi manager will connect to a AP then says 'Driver not loaded.' and disconnect. I saw Anavas' post in the "i will pay..." thread and said that wifi was working on his. So, I'm guessing it's possible to have wifi on this model. I'm hoping he/she or someone else can help me out? It's just strange that it seems to start working (can shortly do SiteSurvey as well sometimes)...
As can be guessed the driver update from HP doesn't work (incorrect revision error).
Resetting makes it works for a short time, but then I get the 'Driver not loaded' thing.
/* EDIT
* This only appears to happen when in the cradle. I took it out and it didn't give me anymore problems...weird, maybe something to do with connecting through usb vs wi-fi conflict?
*/
Thanks a bunch.
CE OS 5.2.1437 (Build 17944.0.3.1)
hi,
I checked with my hx2795 and I don't have any problem connecting WiFi so far,
I can able to connect it from my home and the office.
I even checked with the cradle, I have no problem,
Have you done a hard reset once you flashed the ROM, or did you install any other driver / software ?
I used my ppc at school all day today, and plugged it in cradle just now. I can't repeat the error, so I have no idea how, but it's working just fine. So....solution was to do nothing and let it go away, haha.
Ipaq Hx 2190 Wm6 Pdaviet Installed Ok
I Have Installed Wm6 Pdaviet Rom On My Hx2190 And All Worked Faster And Better.
No Problems To Install From Hp Rom 1.00.01h, Just Update In Pre-bootloader Mode In Windows Xp Sp2 Os. After Flashing No Need To Make Hard Reset, The System Starts Normaly.No Problems It Batery.
-put device into WHITE bootloader mode and again run the 1.0h rom setup. When you arrive at the screen that asks "update" or "cancel",
1. rename the wm5.xxx.nbf original from HP to wm5.xxx.nbf.old
2. rename the new wm6.xx.nbf from the 4pda.rar/pdaviet file to whatever your wm5-wm5.xxxx.nbf.
3.Flashing begin wait until finish. AC power must be conect. voila!!!
Normal Bootloader Mode:
contacts + mail + reset -let go and press calendar to activate
White Screen Bootloader Mode:
contacts + itask + reset -let go and press calendar to activate
Format P.S. (hold down until activated)(screen will say formating p.s. when activated):
contacts + messaging + power + reset
OR (I had to use this to format the p.s. after the PDAVIET rom upgrade)
calender + power + messaging + reset, release reset - release all
*ROM 4pda.ru
http://4pda.ru/forum/index.php?showtopic=52176 (site)
http://rapidshare.com/files/53282580/WM06.rar.html (rom)
*ROM Pdaviet (Better then 4pda)
http://pdaviet.net/showthread.php?t=13245 (site)
1/2 http://tom-love.net/ROM/HP/WM6.0_5.0...2000.part1.rar (rom)
2/2 http://rapidshare.com/files/60450793...part2.rar.html (rom)
Great Job. Thanks From Portugal.
Randomly when I update QuickGPS I get an error:
"Data Activation Failed:
Location setting must be on so that the latest satellite data can be used to speed up GPS positioning"
I'm on a T-Mobile USA Touch Pro 2.
If I restart my device, I can update QuickGPS without error. But once I get this error, I always do until I restart my device. Its like the "location setting" just dissapeared. Anyone have a similar issue or know of a fix?
I'm having same problem.
I've try to update the QuickGPS and it tells me I need to set location to on but I can not find it anywhere. It suppose to be at Start, Settings, Phone, Services then I should be able to see locations but I don't see it.
It's missing and I hate to call customer's services and run into someone who reads out of manuals.
Any takers?
TIA.
Anyone have any ideas?
same prob
I see that my location is set to on, but wont update regardless of soft reset. just updated to europe wwe 6.5 from htc site. didnt have prob with 6.1 stock from tmo usa
I have the same problem with the stock rom from sprint. it will say i need to turn on location setting, but when i look, it's already on. also, if i try to turn off location setting, it stays on. when i look again, after selecting off, ok, etc., the location setting says on again. soft reset is the only thing that fixes it.
after soft reset, i quickgps, then run garmin and it works fine. after i turn off garmin and don't use it for awhile, then i can't get a fix and i get the location setting error when trying to run quickgps.
any ideas?
I'm using HTC Topaz with official WM6.5. I've found that this problem happens after installing WM6VoIP.cab (it's necessary for enabling SIP). Btw not only QuickGPS fails with update, GPS completely stops working.
Removing of "Sleuth's WM6VoIP" through "Add\remove programs:" doesn't work - only Hard reset helps.
Hi. I'm a fun of yours work on Samsung Wave. I come here to ask if is possibile to create a program that automatically delete the gps+ data.
I have the JL2 unofficial fw on my Wave and I checked that, without a manual delete data + gps, they are not downloaded. It 's always necessary, any time, enter the secret menu (*#4097*4097#) and manually delete the data.
It would be possible to build a tool able to do this procedure automatically and, perhaps, start Route66 in the same time. In short, do everything with one click. With this settings the fix of our Wave will be always in the order of time of 20-30 seconds. It's possible in yours opinion?
Why do you need to delete any data? I've installed Sygic and i get a lock after about 10-20 sec ....
pockobg said:
Why do you need to delete any data? I've installed Sygic and i get a lock after about 10-20 sec ....
Click to expand...
Click to collapse
Is difficult to explain the situation. I use Ruote66 and fw JL2. I haven't a flat plan on phone and I use wap configuration. I think isn't a problem of Ruote66 but of the internal settings of gps. In my case, if I don't used the gps from a week, the fix is slow (12 min). I have active gps+ but the download doesn't run automaticaly if I delete gps data.
Nezmanpro said:
Is difficult to explain the situation. I use Ruote66 and fw JL2. I haven't a flat plan on phone and I use wap configuration. I think isn't a problem of Ruote66 but of the internal settings of gps. In my case, if I don't used the gps from a week, the fix is slow (12 min). I have active gps+ but the download doesn't run automaticaly if I delete gps data.
Click to expand...
Click to collapse
So this is a problem for Route66? Why dont you try Sygic?
pockobg said:
So this is a problem for Route66? Why dont you try Sygic?
Click to expand...
Click to collapse
Becouse I buyed Route66. I want use it and not another software.
Question: Can you give me the fw in your Wave and the setting in secret menù of gps (*#4097*4097#)? My interest is for "gps type" and the value of "time - out" in the "application settings". Thanks
Time out - 60000
GPS Device-Type - HYBRID
I found that setting a timeout to 1000 worked a little better but effectively deleting the data gets it going more quickly. That is after setting up the system correctly in the first place.
Sent from my Hero using Tapatalk
duxxyuk said:
I found that setting a timeout to 1000 worked a little better but effectively deleting the data gets it going more quickly. That is after setting up the system correctly in the first place.
Sent from my Hero using Tapatalk
Click to expand...
Click to collapse
I use this settings:
gps mode: standalone;
gps option: location+ velocity + altitude;
session type: tracking mode;
gps device - type; build - in;
data receive..: All;
time out: 60000 (change to 1000);
Horizzontal Accuracy: 1000;
Vertical Accuracy: 500;
I tryed to use the hybrid type of gps, but my apn doesn't support traffic of data. So I set built - in and it's ok if I delete gps data. Now, the most rational solution is waiting a new fw that, perhaps, will solve this problem but my idea is easy and can give to all those who use route66 an immediately solution.
So, there is anyone that can realise this application? Is possible?
Here's how I got mine working correctly. (effectively I finish with Nezmanpro's settings as well)
1. Dial *#4097*4097#
2. Choose 3-User setting
3. Choose 1-Assist Method Type then select AGPS. System will reboot.
4. When the phone boots and returns to idle mode (after entering pin and checking the SD Card) dial *#4097*4097#.
2. Choose 3-User setting
3. Choose 2-SUPL Setting and set the options as below
Use AGPS or NOT = On
MT-Auto Configuration = Off
SUPL MT-Response Type = Accept
Server Address Type = IP_ADDRESS
Server FQDN Type = Custom Config (this was originally BMC LIVE TEST )
SUPL Secure Socket = Off
Server IP Address = 74.125.77.192
Server Port = 7276
I then go back up to "Server Address Type" and set that to "HOST_NAME". I can then set Server Custom FQDN = supl.google.com
I think there's a bug here as the port should also be available when using a host name - when choosing host_name the port field is locked, that's the reason behind going back up and changing the "Server Address type".
Save this. then go into 4-Network Profile
4. Set the network to the one you use for your internet access, not the mms.
5. Check that in the PDR Setting all is checked.
6. Go back to the main menu of LBS Application then select 2. Application Setting
7. Set the following options:
GPS Mode = A-GPS CP Based
(See the following post for further info http://forum.xda-developers.com/showthread.php?t=729118)
GPS Option = Location+Velocity + Altitude
Session Type = Tracking Mode
GPS Device-Type = HYBRID
Date Recieve Type = All
Time Out = 1000 (like Nezmanpro)
Horizontal Accuracy = 100
Vertical Accuracy = 500
8. I then go back into User Setting
9. Back into Assist Method
10. Set Assist Method Type = GPS+
System will restart
11.When the phone boots and returns to idle mode (after entering pin and checking the SD Card) dial *#4097*4097# to get back to the LBS Application.
12. Go back into 3-User Setting
You'll see that SUPL settings are no longer present.
13. Go into GPS+ Setting and check that Auto Download = Enabled
14. Go back to the LBS Application menu then 6- DELETE GPS DATA
16. Happy navigation. Phew
duxxyuk said:
Here's how I got mine working correctly. (effectively I finish with Nezmanpro's settings as well)
1. Dial *#4097*4097#
2. Choose 3-User setting
3. Choose 1-Assist Method Type then select AGPS. System will reboot.
4. When the phone boots and returns to idle mode (after entering pin and checking the SD Card) dial *#4097*4097#.
2. Choose 3-User setting
3. Choose 2-SUPL Setting and set the options as below
Use AGPS or NOT = On
MT-Auto Configuration = Off
SUPL MT-Response Type = Accept
Server Address Type = IP_ADDRESS
Server FQDN Type = Custom Config (this was originally BMC LIVE TEST )
SUPL Secure Socket = Off
Server IP Address = 74.125.77.192
Server Port = 7276
I then go back up to "Server Address Type" and set that to "HOST_NAME". I can then set Server Custom FQDN = supl.google.com
I think there's a bug here as the port should also be available when using a host name - when choosing host_name the port field is locked, that's the reason behind going back up and changing the "Server Address type".
Save this. then go into 4-Network Profile
4. Set the network to the one you use for your internet access, not the mms.
5. Check that in the PDR Setting all is checked.
6. Go back to the main menu of LBS Application then select 2. Application Setting
7. Set the following options:
GPS Mode = A-GPS CP Based
(See the following post for further info http://forum.xda-developers.com/showthread.php?t=729118)
GPS Option = Location+Velocity + Altitude
Session Type = Tracking Mode
GPS Device-Type = HYBRID
Date Recieve Type = All
Time Out = 1000 (like Nezmanpro)
Horizontal Accuracy = 100
Vertical Accuracy = 500
8. I then go back into User Setting
9. Back into Assist Method
10. Set Assist Method Type = GPS+
System will restart
11.When the phone boots and returns to idle mode (after entering pin and checking the SD Card) dial *#4097*4097# to get back to the LBS Application.
12. Go back into 3-User Setting
You'll see that SUPL settings are no longer present.
13. Go into GPS+ Setting and check that Auto Download = Enabled
14. Go back to the LBS Application menu then 6- DELETE GPS DATA
16. Happy navigation. Phew
Click to expand...
Click to collapse
Ok. But you must always manually delete gps data after this operation? I Knew that this operation was for functionally to have more speed to data download but my problem doesn't solve, becouse you must always delete gps data. Or not?
In order to get a fix quickly - ahem - in less than 3 minutes I need to delete the gps data.
Compared to a HTC hero I have the impression that the phone has no A in GPS.
the HTC hero locks in under 30 seconds the wave in under 3 minutes.
duxxyuk said:
In order to get a fix quickly - ahem - in less than 3 minutes I need to delete the gps data.
Compared to a HTC hero I have the impression that the phone has no A in GPS.
the HTC hero locks in under 30 seconds the wave in under 3 minutes.
Click to expand...
Click to collapse
An application that auto deletes the gps data would fix this problem.
So the Wave does not use network assisted GPS? Then those Application settings in the GPS menu do not make sense other than the Standalone mode?
bsbharath1987 said:
So the Wave does not use network assisted GPS? Then those Application settings in the GPS menu do not make sense other than the Standalone mode?
Click to expand...
Click to collapse
Having deleted the gps data this morning. I put the phone in 3G mode... gps lock in under a minute... I think YES the phone is capable of being assisted it's just that Samsung appear to have completely misconfigured and have forgotten to implement the gps data timeout :-(
definitely not something that would get past Steve Jobs....
i think we have nothing to do untill now except waiting a new firmware fixing this
Sorry for my English!
CAUTION: USE THIS AT YOUR OWN RISK!
YouTube, your favorite navigation app, video player, online radio, online TV etc. now works on factory multimedia.
No need to connect your multimedia to internet!
This method works fine on models 2016-2018 of issue:
KIA: Optima JF (K5), Rio, Soul, Ceed, Sorento Prime, Stinger, Sportage, Cerato (Forte) (may be other).
HYUNDAI: Solaris, SantaFe, Sonata, Elantra, Creta, Genesis G70, Genesis G80 (may be other).
On board we have Navigation/Multimedia system on Android 4.2.2;
All fine-work applications on my Cloud drive HERE
Please watch all videos from my YouTube channel Everything about everything
If you like this please — Donate!:fingers-crossed:
PayPal – [email protected]
If you are not sure in your actions - I can lead you by Skype (WhatsApp, Telegram)
WARNING!
Do not install any LAUNCHERS (NovaLauncher etc.) or ROOT - it`s brick your device.
Do not do anything else! Do not enter in other sections of Engineering mode.
Be patient and follow the instructions strictly!
FIRST:
Download all the apps from my Cloud drive HERE
And put all this files to root of the USB drive (FAT32)
Let`s Go!
This hack method no need`s to connect your multimedia to internet, if necessary
- activate wifi access point on your phone or use wifi router. Connect your multimedia system to hotspot.
You can watch my VIDEO MANUAL on YouTube HERE
ENGINEERING MODE:
Go to All Menus -> Settings -> Screensaver.
To enter in the Engineering mode you need to tap 7 times under screensavers icons (on red rings) from left to right and back.
do it fast.
Great! Now we have password window! The password is – time on your clock now!
Ok, its luck!
ANDROID SETTINGS:
Now we need to enter to Android settings -> Security and activate Unknown resources.
Done! This will give us the opportunity to install applications from the USB drive.
Note: this system hasn`t go Google apps, Play Market etc.
Push Home button and then we need to access to Engineering mode again.
INSTALLING FILE MANAGER:
To access to the USB drive and install all the applications we need to install File Manager first!
Go to All Menus -> Settings -> Screensaver, tap-tap-tap-tap-tap-tap-tap, password - time on clock.
Engineering mode -> All Applications -> Browser
On adress bar write: file:///storage/usb0/file.apk and tap OK!
Now you can install the File Manager, install it and tap Open!
Got it!
INSTALLING APPS:
In File Manager -> USB Storage you will see all apps.
Fist install EasyTouch, when it`s intalled tap Open.
Play EasyTouch Demo and them tap Go.
Note: EasyTouch Settings works only on portrait orientation (don`t be afraid it`s mormal).
So, there are many settings, they are no need us now, we need just activate EasyTouch button.
Done! Now push Home and than tap EasyTouch button to open а window. Now we have BACK and HOME buttons.
With long press on any icon in this window it can changed. Change one of them by choosing Engineering mode shortcut on Choose app -Done! Tap anywhere to close window.
Call the window again, swipe left and open Android settings -> Special abilities -> Services EasyTouch - ON
That’s Ok, now we can normally surf in internet and have all shortcuts of any apps.
SOUND FIX:
Note: Sound on third-party apps works only on MEDIA MODE whit connected USB flash drive (with media files) or with connected Bluetooth device.
On RADIO or AUX MODE sounds from third-party apps doesn’t works!
So, push EasyTouch button then swipe window and choose File Manager. Open USB storage and install SoundAbout, the Open it.
Now we in SoundAbout settings. Choose on MEDIA AUDIO - Wired Headphones and that`s all.
Tap EasyTouch button and BACK.
Now we need to restart the multimedia - push reset button in SD card slot one time (or find it near you screen). Or you can turn off ACC, open and close driver door and wait 5 minutes to restart the Multimedia.
Sound fixed!
Now you can install any apps and it will be working fine with sound!
YOUTUBE:
On board we hasn`t got Google apps, so we need to install YouTube modification – YOUTUBE VANCED
Push EasyTouch button then swipe window and choose File Manager. Open USB storage and install YouTube Vanced.
Now you can try it!
Open EasyTouch window and place YOUTUBE VANCED shortcut.
VLC PLAYER:
Push EasyTouch button then swipe window and choose File Manager. Open USB storage and install VLC Lite.
Go to VLC Settings -> Hardware acceleration – Full acceleration. Set it because we has poor hardware.
Now you can watch films, clips, cartoons and everything you want from your USB flash drive or SD card.
Don`t forget about shortcut.
HERE NAVIGATION (or another favorite navigation):
Note: Do not forget to connect WIFI first.
Push EasyTouch button then swipe window and choose File Manager. Open USB storage and install HERE WeGo, launch, place shortcut.
You can install everything applications you need but remember:
DO NOT INSTALL ANY LAUNCHERS AND ROOT. DO NOT OPEN ANYTHING ELSE IN THE ENGINEERING MENU.
If you are not sure in your actions - I can lead you by Skype (WhatsApp, Telegram)
Thanks!:victory:
Amazing.
How about other applications? Is it safe to install other simple apps without dependency on Google Play?
Did you try Torque?
This hack is missing a very important part: how to backup everything and restore to factory state.
Dissimilis said:
Amazing.
How about other applications? Is it safe to install other simple apps without dependency on Google Play?
Did you try Torque?
This hack is missing a very important part: how to backup everything and restore to factory state.
Click to expand...
Click to collapse
Yep, its safe! im test this files
I don`t try Torque but someone try it and its work perfect
Sorry, this is my video "How to do Factory Reset from Engineering Mode" https://youtu.be/MmJOSUUyB3Y
zavpasha said:
Yep, its safe! im test this files
I don`t try Torque but someone try it and its work perfect
Sorry, this is my video "How to do Factory Reset from Engineering Mode"
Click to expand...
Click to collapse
You said not to touch any of engineering mode applications.
Do you have a list of what is safe try? I'm interested in poking around logs and stuff, but afraid to touch anything because of your warning
zavpasha said:
Sorry for my English!
CAUTION: USE THIS AT YOUR OWN RISK!
YouTube, your favorite navigation app, video player, online radio, online TV etc. now works on factory multimedia.
No need to connect your multimedia to internet!
This method works fine on models 2016-2018 of issue:
KIA: Optima JF (K5), Rio, Soul, Ceed, Sorento Prime, Stinger, Sportage, Cerato (Forte) (may be other).
HYUNDAI: Solaris, SantaFe, Sonata, Elantra, Creta, Genesis G70, Genesis G80 (may be other).
On board we have Navigation/Multimedia system on Android 4.2.2;
All fine-work applications on my Cloud drive HERE
If you like this please — Donate!:fingers-crossed:
PayPal – [email protected]
If you are not sure in your actions - I can lead you by Skype (WhatsApp, Telegram)
WARNING!
Do not install any LAUNCHERS (NovaLauncher etc.) or ROOT - it`s brick your device.
Do not do anything else! Do not enter in other sections of Engineering mode.
Be patient and follow the instructions strictly!
FIRST:
Download all the apps from my Cloud drive HERE
And put all this files to root of the USB drive (FAT32)
Let`s Go!
This hack method no need`s to connect your multimedia to internet, if necessary
- activate wifi access point on your phone or use wifi router. Connect your multimedia system to hotspot.
You can watch my VIDEO MANUAL on YouTube HERE
ENGINEERING MODE:
Go to All Menus -> Settings -> Screensaver.
To enter in the Engineering mode you need to tap 7 times under screensavers icons (on red rings) from left to right and back.
do it fast.
Great! Now we have password window! The password is – time on your clock now!
Ok, its luck!
ANDROID SETTINGS:
Now we need to enter to Android settings -> Security and activate Unknown resources.
Done! This will give us the opportunity to install applications from the USB drive.
Note: this system hasn`t go Google apps, Play Market etc.
Push Home button and then we need to access to Engineering mode again.
INSTALLING FILE MANAGER:
To access to the USB drive and install all the applications we need to install File Manager first!
Go to All Menus -> Settings -> Screensaver, tap-tap-tap-tap-tap-tap-tap, password - time on clock.
Engineering mode -> All Applications -> Browser
On adress bar write: file:///storage/usb0/file.apk and tap OK!
Now you can install the File Manager, install it and tap Open!
Got it!
INSTALLING APPS:
In File Manager -> USB Storage you will see all apps.
Fist install EasyTouch, when it`s intalled tap Open.
Play EasyTouch Demo and them tap Go.
Note: EasyTouch Settings works only on portrait orientation (don`t be afraid it`s mormal).
So, there are many settings, they are no need us now, we need just activate EasyTouch button.
Done! Now push Home and than tap EasyTouch button to open а window. Now we have BACK and HOME buttons.
With long press on any icon in this window it can changed. Change one of them by choosing Engineering mode shortcut on Choose app -Done! Tap anywhere to close window.
Call the window again, swipe left and open Android settings -> Special abilities -> Services EasyTouch - ON
That’s Ok, now we can normally surf in internet and have all shortcuts of any apps.
SOUND FIX:
Note: Sound on third-party apps works only on MEDIA MODE whit connected USB flash drive (with media files) or with connected Bluetooth device.
On RADIO or AUX MODE sounds from third-party apps doesn’t works!
So, push EasyTouch button then swipe window and choose File Manager. Open USB storage and install SoundAbout, the Open it.
Now we in SoundAbout settings. Choose on MEDIA AUDIO - Wired Headphones and that`s all.
Tap EasyTouch button and BACK.
Now we need to restart the multimedia - push reset button in SD card slot one time (or find it near you screen). Or you can turn off ACC, open and close driver door and wait 5 minutes to restart the Multimedia.
Sound fixed!
Now you can install any apps and it will be working fine with sound!
YOUTUBE:
On board we hasn`t got Google apps, so we need to install YouTube modification – YOUTUBE VANCED
Push EasyTouch button then swipe window and choose File Manager. Open USB storage and install YouTube Vanced.
Now you can try it!
Open EasyTouch window and place YOUTUBE VANCED shortcut.
VLC PLAYER:
Push EasyTouch button then swipe window and choose File Manager. Open USB storage and install VLC Lite.
Go to VLC Settings -> Hardware acceleration – Full acceleration. Set it because we has poor hardware.
Now you can watch films, clips, cartoons and everything you want from your USB flash drive or SD card.
Don`t forget about shortcut.
HERE NAVIGATION (or another favorite navigation):
Note: Do not forget to connect WIFI first.
Push EasyTouch button then swipe window and choose File Manager. Open USB storage and install HERE WeGo, launch, place shortcut.
You can install everything applications you need but remember:
DO NOT INSTALL ANY LAUNCHERS AND ROOT. DO NOT OPEN ANYTHING ELSE IN THE ENGINEERING MENU.
If you are not sure in your actions - I can lead you by Skype (WhatsApp, Telegram)
Thanks!:victory:
Click to expand...
Click to collapse
hi ... unfortunately I can not type the address in the bar because the keyboard does not appear (either by tapping or holding down on the bar)
mvlion1975 said:
hi ... unfortunately I can not type the address in the bar because the keyboard does not appear (either by tapping or holding down on the bar)
Click to expand...
Click to collapse
Try this https://youtu.be/vlcB3VtociY
If it's not help write me
Thanks!!
And audio + radio?
Not possible?
josan1990 said:
Thanks!!
And audio + radio?
Not possible?
Click to expand...
Click to collapse
May be later...
Now it's not
good evening
you do not have a solution for unbricked the tablet? she boot on the hyundai logo for 2 days. I cut the battery 1 night but it's the same .. help me please
sorry for my english: i m french and it s google traduction work for me
Hi,
using Soundabout is ok but after it is installed, if the car plays the autovelox sound or other alerts from AVM, the front speakers stop working until you reset the audio configuration or restart the car.....
chrispazz said:
Hi,
using Soundabout is ok but after it is installed, if the car plays the autovelox sound or other alerts from AVM, the front speakers stop working until you reset the audio configuration or restart the car.....
Click to expand...
Click to collapse
Deactivate mute sounds function in navigation settings
Yes, but in this way If I am right the notification about speed cameras will not silence music.....correct?
chrispazz said:
Hi,
using Soundabout is ok but after it is installed, if the car plays the autovelox sound or other alerts from AVM, the front speakers stop working until you reset the audio configuration or restart the car.....
Click to expand...
Click to collapse
You need to deactivate mute sounds function in your navigation
Thanks for sharing this knowledge. I tried getting into Engineering Mode in Kia Sorento 2019 using this method and it doesn't seem to work. The local dealer installed Waze and a radio app on it so there must be a way to install other apps as well. Any idea of an alternative access method or what to try next?
chrispazz said:
Yes, but in this way If I am right the notification about speed cameras will not silence music.....correct?
Click to expand...
Click to collapse
Yep!
ericb01 said:
good evening
you do not have a solution for unbricked the tablet? she boot on the hyundai logo for 2 days. I cut the battery 1 night but it's the same .. help me please
sorry for my english: i m french and it s google traduction work for me
Click to expand...
Click to collapse
It's terrible, I'm warning ⚠ you in my post
so you have 2 ways:
1. Hard: find a good radiomechanic or mobile phone fixer man and give your device to him and show this instructions https://www.drive2.ru/l/523031635092832690/
Than wait...
2. Easy: goes to hyundai dealer and said that "I woked up in the morning, got my, start the engine and saw hyundai logo... It's warranty!"
So, if I'm will be on your place - I'm choosed second way
hello
thank you.. i wait an answer from my cc.
Apk not compatible
Hi,
Thanks zavpasha for all the procedure !
Working as a driver, I wonder if an app like " uber driver" could run onto this tablet.
I did the test by launching the .apk and very quickly an error says the package is not compliant.
Versions of this app are available here:
www apkmirror com/apk/uber-technologies-inc/uber-driver/
Question: could it help to setup in developper + debug mode ?
Cheers
Jcg2a said:
Hi,
Thanks zavpasha for all the procedure !
Working as a driver, I wonder if an app like " uber driver" could run onto this tablet.
I did the test by launching the .apk and very quickly an error says the package is not compliant.
Versions of this app are available here:
www apkmirror com/apk/uber-technologies-inc/uber-driver/
Question: could it help to setup in developper + debug mode ?
Cheers
Click to expand...
Click to collapse
Nope, Uber needs newest Android version, so in our multimedia old Android 4.4.2
I have a 2015 Santa fe Sport ultimate package. Any hacks for this AVN system?
I'm trying to find information about a multimedia system i have installed in my Skoda, the sticker on the device says CNT100, which is manufactured by CarNeTek (device page - https://www.carnetek.com.tw/products_detail/15.htm, not sure if they are the manufactures or just a reseller).
The company which sell and install it locally are not willing to share any information about the device, and of course are not willing to unlock it (to install applications from the play store, tweak configuration, etc.).
On the device there are 6 dip switches (which i couldn't figure out what they control), and no visible button (to get into recovery), i can get to the play store, and install applications - but as soon the installation is completed - they get uninstalled (there is a list of application that are not automatically uninstalled).
The launcher looks like a custom local version, there is no way to get into the settings page and the notification bar cannot be clicked (or dragged down), if i click multiple times on the menu - i get a dialog for some configuration, where i'm prompt for password (the dialog has a random number on it - which i suspect is used to generate correct password).
is anyone familiar with this device? or can suggest a way to unlock it?
(attached images of the device and the boot screen)
Hey mrtowel!
Trying to figure out that as well.
You said "if i click multiple times on the menu"
Where is this menu? possible to send a photo of that?
I'm talking about an Israeli version
Seems to be customized by [email protected]
sorry but i was wrong describing the way to get to the password dialog, on the home screen - there is a weather widget, showing the weather on the left side and the clock on the right side, multiple taps on the weather allows you to reboot the device, while multiple taps on the clock gets you to the password dialog.
I made some progress with the device - still working on getting it unlocked completely, let me know if you want more details.
mrtowel said:
Seems to be customized by [email protected]
sorry but i was wrong describing the way to get to the password dialog, on the home screen - there is a weather widget, showing the weather on the left side and the clock on the right side, multiple taps on the weather allows you to reboot the device, while multiple taps on the clock gets you to the password dialog.
I made some progress with the device - still working on getting it unlocked completely, let me know if you want more details.
Click to expand...
Click to collapse
Hey!
Just found that new to me. Pushed 6 times on the clock of the weather widget and got a prompt for the password. I receive a 9 digit number with that.
Also found that if you do the same on the temperature indication, you'll be prompt for device restart.
So that's a progress.
Anyways, I will be happy to hear from you, what progress you have made on this.
Will send you a PM.
Did someone have any success?
Hello, i have a Toyota corolla 2016 with "android multimedia" that have only 2 apps without google play or any apps, the startup screen is like yours.
i wan to unlock the system, someone know how to do that?
gtrs36 said:
Hello, i have a Toyota corolla 2016 with "android multimedia" that have only 2 apps without google play or any apps, the startup screen is like yours.
i wan to unlock the system, someone know how to do that?
Click to expand...
Click to collapse
try to get to app store (in case it is installed) through one of the installed apps using the 'rate us' option, you can also try and push a play store link through bluetooth, if it works - the android system will launch the play store app, and you'll be able to setup your account.
Once you get to the play store - download and install Googel app (https://play.google.com/store/apps/details?id=com.google.android.googlequicksearchbox&hl=en) this will let you ask google assistant to 'Open Display Settings' (in my case this option let me enable the drag down menu, where i could easily access the settings and other stuff).
hope that helps
?
Hey did you succeed?
please help
Hi
did any one of you had any success with getting into setting menu ?
i can get to google play...but as was posted before, everything i try to install immediately erase itself.....
does any one have the approved app list from ituran ?
i do believe that together we can crack this....
thanks
Thanks for the tips I've made it to download youtube! But how I can bypass the limit to install all apps from play store?
Also how can I cancel the restrictions of using apps during drive?
Thanks
Allon
Hey @mrtowel any change you can share some more details?
I tried connecting to the USB with my laptop to try doing some adb commands but it did not detect anything
I'm also wondering about the dip switch
and how to get the password bypass
Would really like to hear some more details if you can share please?
Just came here to see if can recall my steps from last time i played with the device (i kind of gave up, as it worked well with what there is, but recent update made it work really slow).
turns out there is a post on facebook (https://facebook.com/groups/gilcar/permalink/729881061134680/?comment_id=729883497801103), i'm going to try and build some utility to generate unlock codes (last time, i managed to get to an adb terminal, but i wasn't aware of the `pm hide` option to disable the installation blocker ****).
will post updates here if i get some progress
For anyone interested, attached the list of whitelisted apps. a jar to generate the code to enable tech mode and how i disabled the installation blocker
For the jar - you would need to get your device Wifi MAC address (see old post from 2019 on how to enable the navigation bar), which can be retrieved from the 'אודות' section. (run the jar by running 'java -jar codeGen_jar.jar 00:11:22:33:44:55' - replace the numbers with your device mac address)
Wifi must be enabled - before the next step
To get to the code, hit few clicks on the clock widget in the home screen would prompt you with a password (if the code generator matches your version of connect-it (if it isn't - see bypass admin mode workaround below), the codes would match), enter the unlock code (admin mode result from the codeGen output) and move to the apps section - you would see 'tech mode' application.
Wifi must be connected before the next step
On the tech mode application - you would have another code (tech mode result from the codeGen) enter it - and it would open a page to enable adb remote server (you must be connected to a wifi network to get it to work).
Connect to the adb using a remote shell from another device (or a laptop), to the specified IP on port 1917 (note that most mobile tethering options won't work due to networking limitations). If you don't have an accessible wifi network - see Wifi Workaround below
From adb, run the following:
to disable the application which blocks installations: pm hide com.ituran.installationblocker
Disable updates: pm hide com.ituran.systemupdateservice
Disable blocking applications while driving: pm hide com.ituran.driveusagemonitor
Tips:
While in admin mode, you can see all installed applications, and pin them to the start page of the home screen, recommend to pin Play Store app (as it is usually hidden)
Don't try to enable or enter 'Guest mode' (i tried it, and the device went into boot loop)
The codes generated are date sensitive, so either generate new ones if you won't use them in the same day, or change the device date.
Wifi Workaround : a workaround can be to install modified version of 'Remote ADB Shell' (attached) on the device, save it to your mobile phone, and push it to the device through bluetooth, this version is the same version as 'Remote ADB Shell' from the play store - only names 'Spotify' which will keep it installed on the device, after installation, run it and connect to 127.0.0.1 on port 1917 instead.
Bypass admin mode workaround : while Admin Mode enables you to view the hidden applications, in the above process, it mainly gives you the option to run the tech mode app. if the code for the admin mode isn't working for you, install 'Amaze file explorer' (attached - it was renamed to bypass the installation blocker) by pushing it through bluetooth.
You can find more details on this facebook post (not mine - but i used details from this thread to figure out how to disable the application from ADB)
Enjoy and drive safely.
mrtowel said:
For anyone interested, attached the list of whitelisted apps. a jar to generate the code to enable tech mode and how i disabled the installation blocker
For the jar - you would need to get your device Wifi MAC address (see old post from 2019 on how to enable the navigation bar), which can be retrieved from the 'אודות' section. (run the jar by running 'java -jar codeGen_jar.jar 00:11:22:33:44:55' - replace the numbers with your device mac address)
Wifi must be enabled - before the next step
To get to the code, hit few clicks on the clock widget in the home screen would prompt you with a password (if the code generator matches your version of connect-it (if it isn't - see bypass admin mode workaround below), the codes would match), enter the unlock code (admin mode result from the codeGen output) and move to the apps section - you would see 'tech mode' application.
Wifi must be connected before the next step
On the tech mode application - you would have another code (tech mode result from the codeGen) enter it - and it would open a page to enable adb remote server (you must be connected to a wifi network to get it to work).
Connect to the adb using a remote shell from another device (or a laptop), to the specified IP on port 1917 (note that most mobile tethering options won't work due to networking limitations). If you don't have an accessible wifi network - see Wifi Workaround below
From adb, run the following:
to disable the application which blocks installations: pm hide com.ituran.installationblocker
Disable updates: pm hide com.ituran.systemupdateservice
Disable blocking applications while driving: pm hide com.ituran.driveusagemonitor
Tips:
While in admin mode, you can see all installed applications, and pin them to the start page of the home screen, recommend to pin Play Store app (as it is usually hidden)
Don't try to enable or enter 'Guest mode' (i tried it, and the device went into boot loop)
The codes generated are date sensitive, so either generate new ones if you won't use them in the same day, or change the device date.
Wifi Workaround : a workaround can be to install modified version of 'Remote ADB Shell' (attached) on the device, save it to your mobile phone, and push it to the device through bluetooth, this version is the same version as 'Remote ADB Shell' from the play store - only names 'Spotify' which will keep it installed on the device, after installation, run it and connect to 127.0.0.1 on port 1917 instead.
Bypass admin mode workaround : while Admin Mode enables you to view the hidden applications, in the above process, it mainly gives you the option to run the tech mode app. if the code for the admin mode isn't working for you, install 'Amaze file explorer' (attached - it was renamed to bypass the installation blocker) by pushing it through bluetooth.
You can find more details on this facebook post (not mine - but i used details from this thread to figure out how to disable the application from ADB)
Enjoy and drive safely.
Click to expand...
Click to collapse
Does this method work with Hyundai, Mitsubishi, etc...?
Hi Mr.
mrtoweldo you have any videos explain the steps in post #13 I will be thankful if you provide me with for urgent case.
thank you dear for great job