Develop Bugs

SDHC for Artemis WM6 CAB

As many posts already speak about that. Here are the .cab that work (P3300, ARTEMIS, with WM6)
MOST IMPORTANT is to format your actual SD card and future SDHC card with fat32 ! (backup data before)
DONT NEED TO FORMAT IF YOUR CARD IS ALREADY FORMATED WITH THIS FILE FORMAT.
You can then use any fat32 card you want after SDHC upgrade.
WM5torage 1.78b is working fine but slow for me after SDHC upgrade. Tell us if it run for you too.
Artemis running WM5 could be flashed too, with Certification .cab (.xml inside). I will post a link as soon as possible.
ANSWER!! Yes WM5torage is very slow, as it is not working as usual. Don't know if the creator of this program gonna upgrade it for SDHC use. This software is not so important for the use of your SDHC Card, that was just to say that it could work (very slow) with new SDHC drivers.
[WARNING] There was some problems after this install. Tell me if you got problems using this .cab --> SDHC_Artemis_back2original.cab are the original OMAP850.dll, SDBus.dll, SDMemory.dll for Artemis, so you can load it at any time to go back to your original settings without SDHC support.
[WARNING] there is a problem if you plan to flash with SDHC card inserted on your device. With USB wire too. Remove your SDHC card before flashing or hard resetting your device.

I m the first one to get it.

I've got it
Thanks
Now waiting for the 6Gb

SdHc
gguyaz said:
As many posts already speak about that. Here are the .cab that work (P3300, ARTEMIS, with WM6)
MOST IMPORTANT is to format your actual SD card and future SDHC card with fat32 ! (backup data before)
You can then use both of them after SDHC upgrade.
WM5torage 1.78b is working fine for me after SDHC upgrade. Tell us if it run for you too.
Click to expand...
Click to collapse
Hi,
anything for WM5?
thanks

Someone has tested? Please make a comment
quelqu'un l'a testé? merci de nous faire un commentaire

6 Gb Sandisk Micro Sdhc, Htc P3300, Original Wm6
IT WORKS!!!!!!!!!!!!!!!!
Just bought the phone upgraded the ROM with original HTC WM6 ROM. Used the file as above. Pluged in my Micro SD and it works!!!!!!!
I had phoned HTC support for help as I bough the 6GB SDHC card when i bought the phone but couldnt get it to work, but was then told it doesnt support SDHC!
BUT IT DOES NOW!!!!

finally 4GB working on my P3300 WM6 (original HTC rom)
hoooooowever, the transfer through wm5torage is veeeeeeeeeeeeeeery slow!
sais 2h. for 1GB thats way off normal. wasn't that slow with my 2GB card (didn't try the 2GB card with new driver tho)
anyways, when i got everything on my new 4GB card, i am gonna do some benchmarks, try the card from the phone itself... and if it's just the USB transfer that is hella slow... i can take that.
btw, when i saw wm5torage 178beta so slow i tried 175. it works, but same slow speed

Thats a slow speed indeed. I have been copying files to fill my 6gb card since 6.45 just after my last post above. Its is now 7.40 and i have copied 1.7 GB.
Thats 1.7 gb an hour. Not a fantastic speed.
Im connected to a USB 2.0 port on my PC using Active Sync 4.5, connected directly to my P3300 (no cradle).
I didnt run all the files above though. All i ran was the first file SDHC_Artemic.cab
I didnt run the WM5torage file. Should i have?
Regardless it is working fine so far with out.

rpb said:
I didnt run the WM5torage file. Should i have?
Click to expand...
Click to collapse
if you're used to transfer via active sync, you're perfectly fine.
wm5torage is just a program to convert your phone+sd card into some sort of "usb memory stick" so you can access your phones sd card on every computer without drivers.

merci bq
gguyaz
merci encore pour ce cab... ca reglera l'un des plus gros soucis de l'artemis

gguyaz said:
As many posts already speak about that. Here are the .cab that work (P3300, ARTEMIS, with WM6)
MOST IMPORTANT is to format your actual SD card and future SDHC card with fat32 ! (backup data before)
You can then use both of them after SDHC upgrade.
WM5torage 1.78b is working fine for me after SDHC upgrade. Tell us if it run for you too.
Click to expand...
Click to collapse
This great thanks for the file.
One question - If my current SD card is already fat32 do I need to reformat it and then install the patch or can I just install the patch and upgrade the SD card to an SDHC card later?
Thanks
Rich

First cab?
I can't download the first can file?
I get redirected to the login screen.
But i'm already login

ok, USB transfer was slow, but worked. gonna see next days how syncing goes.
so, this worked great... except on my p3300 the GPS stopped working. u think there is something in this cab patch that could have affected that somehow?

lepsyfou said:
Someone has tested? Please make a comment
quelqu'un l'a testé? merci de nous faire un commentaire
Click to expand...
Click to collapse
It works!
Test passed.
http://bbs.pdafans.com/viewthread.php?tid=460614&extra=page=1&filter=type&typeid=176&page=1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

First of all, Hi. I am new to this fourm and found it very helpful. Anyway, I can confirm that this works for my "O2 XDA Orbit" with 6GB card (FAT32 formatting), it has windows mobile 6 and the ROM version is "3.4.206.2 WWE". I have checked my GPS and Wireless adapter, they both seem to be working fine aswell.
Just to mention the WM5Storage, even before the patch, it was very slow for moving information in and out of the PDA. So I think that it needs an update for WM6 although I haven't yet tried the version that is attached in the very first post becuase alot of people are complaining about it so I didn't even bother, I just used the card reader that came with my card.
Thanks gguyaz for your excellent work.
My Window mobile 6 is official one from o2 itself. Hope it helps

Any news of a cab for WM5?
Cheers,

mugglesquop said:
Any news of a cab for WM5?
Cheers,
Click to expand...
Click to collapse
Hi! did you run a PDA with WM5?
If yes, could you tell us if there are OMAP850_SDHC.dll, sdbus.dll and sdmemory.dll on your \windows directory.

mugglesquop said:
Any news of a cab for WM5?
Cheers,
Click to expand...
Click to collapse
Hi, why don't you install the official WM6 provided by your PDA supplier (It's free).
Regards

kamal_chauhan said:
Hi, why don't you install the official WM6 provided by your PDA supplier (It's free).
Regards
Click to expand...
Click to collapse
1. If you look at my sinature, u'll see i'm with T-Mobile, they suck so much that they didnt release a upgrade for the MDACIII
2. i cant connect my MDA to a PC caus i blew up the USB board (computer doesnt see it when you plug it in)
finally, gguyaz, yes i have all of those files.

gguyaz said:
Hi! did you run a PDA with WM5?
If yes, could you tell us if there are OMAP850_SDHC.dll, sdbus.dll and sdmemory.dll on your \windows directory.
Click to expand...
Click to collapse
I have the HTC P3300 w/ WM5.
I just checked and only seen OMAP850_SDHC.dll.

Linux on HTC Artemis

Hi Windows users,
I just upload a Linux version for people who want to test. Lot of thing are still missing but it is a start.
http://linuxtogo.org/~htcpxa/htcartemis/qtopia/
To install this, simply copy both file on root folder of your sdcard ( you need at least 200MB free after copy)
At the moment you can find a list of what is working here http://www.handhelds.org/moin/moin.cgi/Artemis
I try to maintain this list up to date.
Roller and trackball does not work in Qtopia, i need few developement for this environment.
Also a Comm Manger is missing, i ll try to do one to activate GPS / BT
Notice that actually this works fine on HTC P3300, i did not have any report for other Artemis devices.
As this devices run WM5 or WM6, all data are backup on flash, and linux is just running on SD. For more information please see thread for "linux on Blueangel" or "Linux on Universal"
Update 28 May 2008 , some screenshot
A com manager :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A GPS geocahing software ( website here : http://www.qlandkarte.org ):
A Messenger tools for various protocols ( http://linuxbox2.free.fr/qtapp <- sorry for website, i m bad for that ):
USB Storage tools :
Good luck
Fabrice

wow, I am gna test it..

looks very very nice.

Salut Fabrice.
J'ai essayé sur mon SPV650. C'est très beau. J'espère que tu arriveras à activer le GSM.
Bon courage.
Hi Fabrice.
I tried on my SPV650. It's very beautiful. I hope you get to activate GSM.
Good luck.

interface is really good
i really liked the keyboard

what about opie

moohaad said:
what about opie
Click to expand...
Click to collapse
It does not support the phone operation.

moohaad said:
what about opie
Click to expand...
Click to collapse
opie / gpe / openmoko / android can now work on this device, just need someone to do it.
only limitation is missing drivers like gsm / sound ...

is there ne working android port for artemis???????

sheennick123456 said:
is there ne working android port for artemis???????
Click to expand...
Click to collapse
That's easy to do it yourself, just take artemis kernel and follow one of any howto available get android image, that's all

BabelOued said:
That's easy to do it yourself, just take artemis kernel and follow one of any howto available get android image, that's all
Click to expand...
Click to collapse
I Love to see a linux kernel for artemis... i allready tried it.. it works fine.
Can you give us a little more information about android? I cant find something on the net..

Fracoon said:
I Love to see a linux kernel for artemis... i allready tried it.. it works fine.
Can you give us a little more information about android? I cant find something on the net..
Click to expand...
Click to collapse
have a look here
loving linux on the artemis, would love to get android

Fracoon said:
I Love to see a linux kernel for artemis... i allready tried it.. it works fine.
Can you give us a little more information about android? I cant find something on the net..
Click to expand...
Click to collapse
You can look here http://elinux.org/Android_on_OMAP andspecially thechapter Extracted binaries...
Have fun, i ve tried, but don't like it

love it
working ok, some times when i load qutopia, the screen gous blank(############### it says louding linuc on htc artemis############).
waiting for the new update..... but when ??

Batuss said:
love it
working ok, some times when i load qutopia, the screen gous blank(############### it says louding linuc on htc artemis############).
waiting for the new update..... but when ??
Click to expand...
Click to collapse
Update when i get more thing running , i m working on it... for your white screen, if you have linux and know well linux it can be very good if you post a dmesg output here in an attach .txt file
thanks

got the file but i dont know how to get it from qtopia
Bt is not working, usb not working
I notice 2 problems
1) Suspending is not working correctly, when my artemis suspends(turns the screen off) i cannot turn it on(have to take out my battery)
2) Turning off/restaring the device dont work to, it goes to 100% and noting happends(have to take out my battery)

Batuss said:
got the file but i dont know how to get it from qtopia
Bt is not working, usb not working
I notice 2 problems
1) Suspending is not working correctly, when my artemis suspends(turns the screen off) i cannot turn it on(have to take out my battery)
2) Turning off/restaring the device dont work to, it goes to 100% and noting happends(have to take out my battery)
Click to expand...
Click to collapse
Bt / GPS / USB are working, just need to start it :
USB up is ifconfig usb0 xx.xx.xx.xx
BT is echo 1 > /sys/devices/platform/htcartemis-bt.1/bt_power && hciattach /dev/ttyS0 any
GPS is echo 1 > /sys/devices/platform/htcartemis-gps.1/gps_power
I ve to upload another image with my commanager application so you can see, have to do a tips to extract dmesg automatically too.
Suspend / resume is not working at 100 % i ve flagged it as WIP on status website as you can see, for your device and white screen problem i need more dump ( let see this evening )

Hello
On this page this person was able to run the GSM module on Google Android
http://it029000.massey.ac.nz/vogue/
On the artemis is what is feasible?
On this page.
http://vivien.chappelier.free.fr/typhoon/gsm.html
This person was able to operate part of the GSM module. This is not the same phone but it's still the same processor (TI OMAP 850).
As Babeloued you think?
Sorry my for my english

Phonny said:
Hello
On this page this person was able to run the GSM module on Google Android
http://it029000.massey.ac.nz/vogue/
On the artemis is what is feasible?
Click to expand...
Click to collapse
It is not same processor at all, artemis is OMAP850 and vogue is msm7xxx
Phonny said:
On this page.
http://vivien.chappelier.free.fr/typhoon/gsm.html
This person was able to operate part of the GSM module. This is not the same phone but it's still the same processor (TI OMAP 850).
As Babeloued you think?
Click to expand...
Click to collapse
Yes i know about this one, i m working with their work, but it seem there is small difference between tornado / typhoon and Artemis
Phonny said:
Sorry my for my english
Click to expand...
Click to collapse
English not a problem
BTW i 'm working on RDS FM radio part to try to get RDS/radio working on linux and maybe get TMC informations as it is part of RDS data trame
I just up^load a new image with some improvement and a Com manager quickly done ( around 30mn ) so just GPS / BT works with this tools.
Bye

BabelOued said:
You can look here http://elinux.org/Android_on_OMAP andspecially thechapter Extracted binaries...
Have fun, i ve tried, but don't like it
Click to expand...
Click to collapse
After much research I did not understand how to launch Android on the HTC Artemis.
What to do with system.tar.gz and data.tar.gz files of page http://benno.id.au/blog/2007/11/14/android-filesystems ?
Thank you

FROYO x GINGER ETA: PROJECT SOON TO BE DISCONTINUED

FROYO x RED CAMERA 2011.02.24 FOR BLACKSTONE
I'M STILL UPDATING THIS THREAD FOR NEW BUILD
THANKS TO neopeek AND midnight FOR THIS
First off, there is an insanely huge list of guys who are responsible for making this possible.
Thanks to phhusson, dbz, Stinebd, ACL, arrrghhh , viruscrazy, WisTilt2, Klinux, kama, Reefermattness, chkms, davidebeatrice, elroy944, kstephens98, DracoLX, zenulator, Chamonix, Makkonen, Mrpippy, cr2, Markinus, Babijoee and anyone else forgotten!. I WILL ADD MORE
Thanks to those who have already helped, and to those who will. THANK YOU!
THANKS TO F22 FOR HIS KERNELS
THANKS TO VIRUSCRAZY FOR HIS CAMERA KERNELS
THANKS TO Stickman89 FOR HIS Latest Rootfs + Corrected key mapping for Blackstone
GUYS, I'M NOT A DEV. I JUST HELPING PEOPLE.
FROYO X RED CAMERA 2011.02.24 FOR BLACKSTONE
CHANGE LOG
0- MMS SHOULD WORK FOR GSM
1-MOD BUILD.PROP
2-better gps and location.
3-add it Japanese IME. make sure to unchecked Japanese IME in setting to English (language & keyboard setting)
4-wifi works
5-modprobe ipv6 support. add it ko driver to modules for support
6- zeam launcher
7-add it (rm -f /sdcard/*.rec) to the froyo.user.conf. you will not see those FSCK files any more in wm
8-auto backlight for keyboard. need to change kernels camera, 1250 or 1253
9- speaker phone. need to change kernels camera, 1250 or 1253
10-new market
APPS
1-ASTRO
2-BROWSER
3-CALCULATOR
4-CALENDAR
5-CAMERA.APK
6-CAR HOME
7-CLOCK
8-CONTACTS
9-DEV TOOLS
10-EMAIL
11-GALLERY
12-GMAIL
13-MAPS.
14-NEW MARKET
15-MARKET ENABLER
16-MESSAGING
17-MORELOCALE 2
18-MUSIC
19-GENIE WIDGET
20-SETTINGS
21-SPARE PARTS
22-SPEECH RECORDER
23-SUPERUSER
24-TALK
25-TAPATALK PRO
26-TITANIUM BACKUP
27-VOICE
28-VOICE DIALER
29-VOICE SEARCH
30-WIRELESS TETHER
31-YOUTUBE.
NOT WORKING IN THIS BUILD
1-Bluetooth- still working on this. not working on rhod. please try for you phones
2-3.5mm headset jack
3-Notification LED-doesn't notify, but just outputs whether device is in sleep or active
PREPARE YOUR SD CARD
1-FORMAT YOUR SD CARD TO FAT32. FULL FORMAT
2-DOWNLOAD FROYO X
3-UNZIP IT INTO YOUR SD CARD. ANDBOOT OR TO ROOT SD CARD
4-USE YOUR STARTUP.TXT FOR YOUR DEVICES. ADD THIS COMMAND YOUR STARTUP. rel_path=andboot. OR WITH YOU PUT EVERTHING ON YOUR ROOT SD CARD YOU DON'T NEED TO ADD THIS TO YOUR STARTUP.TXT
5- for cdma devices. add this command for the camera on your startup. board-htcrhodium.is_cdma=1
for gsm devices. add this command for the camera on your startup. board-htcrhodium.is_gsm=0.
FOR CDMA PHONES. REMOVE THE SIM CARD
6- for cdma & gsm devices make sure you have this command on your startup for data. force_cdma=1. for gsm devices is force_cdma=0

THINGS YOU NEED
Current Kernel Builds
http://glemsom.users.anapnea.net/android2/htc-msm-linux/
Current rootfs Builds
http://files.xdandroid.com/rootfs/
Current initrd.gz Builds
http://files.xdandroid.com/initramfs/
Frequently Asked Questions
http://sites.google.com/site/androidport/faq

FROYO x RED camera Install
THANKS TO bassiebal
So I noticed there wasnt any tutorial on how to install it and you just had to search all the posts in the froyo x thread to figure it out. Now I have done it this way.Im sure there are tons of other ways.But this one workes for me and I just want to share it. I will try to keep it up to date so everybody can install android on their blackstone.
All credits to Tiad8 and other developers this is not my build!
special thanks to TRNSLN who helped me install froyo so I can help you
Anyway first things first. Is this something for me to use daily? well here is your change to figure out.
My homescreen+menu+latitude
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
proof the camera works
Sample video(shot with blackstone)
[http://www.youtube.com/watch?feature=player_detailpage&v=OrYAP99pZI4][/YOUTUBE]
screenshot camera app:
sample photo(shot with blackstone) click http://img814.imageshack.us/img814/6485/img20110224231634.jpg for full image
So is this something for you?
whats working and whats not?
wifi/3G/sync =Ok!
market =Ok!
latitude =Ok!
Headphones =Ok!
messaging/calling(call/receive) =Ok!
Bluetooth =testing..
Battery =10/11 hour
Usb =No (at least not with standard app, there have been reports of usb via other program havent tested it yet)
Chapters of this tutorial:
[1]Formatting SD card
[2]Installing Froyo X red
[3]Installing Camera
[4]Finishing up
Downloads
1 Froyo X Red http://www.multiupload.com/16UTFCYLTA
2 kernel+libs http://www.multiupload.com/YGVM8VELPV
3 Haret+Startup.txt-Ts-Calibration http://www.multiupload.com/33Z52W8L14
4 If having problems with booting android try this startup.txt
[1]Formatting SD card
Easy as pie.
put your memory card in a sd card reader (your blackstone will do fine) and plug it in your pc/laptop.
open My pc and look for your memory card and right click on it.
Click Format
http://img37.imageshack.us/img37/3646/16774455.png
Ok great Sd card is formatted and ready to go. no lets move on..
[2]Installing froyo X Red /B]
ok first things first download Froyo X Red and Haret+Startup.txt-Ts-Calibration.
Then unpack Froyo X Red to the root of your memory card(root means on your memory card not in an folder on your memory card)
Then open up Haret+Startup.txt-Ts-Calibration and copy all the files to the root of your memory card.
Now unmount your Blackstone or Sd card reader from your pc.Put the Sd card in your blackstone(if it isnt already there) navigate to your storage card and open the file Haret
Now it shoud just give you a bunch of text and a little linux penguin let it load for a while(note: It coud take some minutes so dont think it wont boot)
it shoud boot. now follow the set-up and sync your google account.then turn off your blackstone and reboot it.so it boots in windows mobile again.when its in windows mobile go to the next step!
[3]Installing Camera
so android working accordingly everything set up but still no camera..
its time to change that
download kernel+libs
simply unpack the zip to your memory card..
overwrite zImage
thats that your done. enjoy android with working camera!
[4]Finishing up
this isnt really a neccesary step but I do recommend it.
open up spare parts and set the Window animation and Transition animation to Fast
and your done! have fun with your brand new Android phone..
dont forget to check this thread for updates!

Ts-calib for Blackstone. Rmove extension and put it in your andboot folder.

You will also need the "lib_camera" folder in the root of your SD-Card for camera to function. This is missing in this ROM distribution, but you can find the link for it in the first post here: http://forum.xda-developers.com/showthread.php?t=883966

Is this FroyoX build of yours still based on the Huawei U8150 from Neopeek? Just wondering of curiosity.

Hello,
I just tried with the 3 different camera modules, and with and without oc.
I used calibration from this thread and also from an older install of mine.
Find attached my STARTUP.txt.
I always have the same result.
Haret Booting OK
Passing Boot animation OK
Unlock SIM card OK
Then during the setup process, after clicking on the droid, it freezes and the image stay put, I can not do anything but soft reset. It does it at different stages: Time setup, or google account setup, or location setup...
If there is a way I can give you more information about what's going on please ask.
Cheers,

ok for those who are having crashes from setup screen: THIS IS WHAT WORKED FOR ME ON MY BLACKSTONE AND MY WORK WITH OTHER DEVICES!!
OPTION (1)
1) WHEN YOU REACH SETUP SCREEN REMOVE SIM CARD ONLY.....NOT BATTERY!
2) NOW CARRY ON WITH SETUP SCREEN AND SKIP EVERYTHING IT MAY FREEZE FOR 5SEC OR SO JUST WAIT!
3) NOW YOUR AT HOME SCREEN NAVIGATE TO (SETTINGS, WIRELESS & NETWORKS, MOBILE NETWORKS, ACCESS POINT NAME.......CHOOSE YOUR PROVIDER!
4) NOW THAT YOU HAVE PROVIDER AND IT HAS A GREEN DOT TO THE RIGHT OF IT YOU NEED TO POWER OFF YOUR DEVICE!
5) REPLACE YOUR SIM CARD AND POWER UP IN WM AND THEN RUN HARET AND YOU SHOULD BE GOOD TO GO WITH NO FREEZING IF YOU HAVE THE 3G ICON SHOW IN YOUR STATUS BAR AT THE TOP!!
OPTION (2)
THIS REQUIRES SPEED BUT WILL WORK BUT YOU HAVE TO BE FAST YOU MAY HAVE TO REBOOT LEAST 3 TIME BECAUSE IT MAY FREEZE!
BOOT HARET WHEN YOU REACH SETUP SCREEN THIS TIME LEAVE SIM CARD IN BUT TRY TO SKIP EVERYTHING AS QUICK AS U CAN, TO GET TO HOME SCREEN, IF YOU MANAGE TO GET TO HOME SCREEN THATS THE SETUP PROCESS DONE, IF YOUR PHONE FREEZES RESTART IT AGAIN YOU SHOULD BE AT HOME SCREEN THIS TIME, YOU NEED TO GO TO (SETTINGS, WIRELESS & NETWORKS, MOBILE NETWORKS, ACCESS POINT NAME.......CHOOSE YOUR PROVIDER THEN GO BACK 1 THEN GO TO NETWORK OPERATORS AND SELECT AUTOMATICALLY IT WILL SEARCH THEN AFTER 10 SECONDS FREEZE...........REBOOT AND YOU SHOULD BE GOOD TO GO! (NOTE YOU SHOULD DO THIS QUICKLY FROM WHEN YOUR HOME SHOWS HOME SCREEN BECAUSE IT WILL FREEZE WITHIN 40 SECONDS)
i know it alot of messing around but its worth it,........if you want to try this build out because its fast fast fast!!!!!
hope it works for you all

These issues are been delt with ive been told in the nxt update............no camera working at the moment

Thank you, that helped.
Now testing other functionalities.
I changed end button mapping to "back home" as it seems it had same mapping as power button initialiy. I also put animations and transitions to fast.
I synchronized my google account and gmail/contacts/agenda are fine.
I'll keep you up to date. But, so far, this is definitely the best versions I ever tested. It is amazingly fast!
This is awesome work!
UPDATE1:
- Wifi : not OK.
This is a shame because as I do not have data plan, it means I can not download apps from the market without wifi, and I would really like to download some apps. I would really appreciate a fix!
- Gallery: OK
- SMS receive and send: OK
- Camera: Not OK
- Music Player: Partially OK because there audio stuttering (note: is this applicable to this version: http://forum.xda-developers.com/showthread.php?t=905085&page=4)
Update2:
-Wifi is OK (just has to change zImage and modules)
- Market: OK (download apps included)
Update3:
- Screen orientation OK
- Talk OK
So far no freeze or sluggishness. Amazingly fast.

Everything works perfect! Even the live wallpapers are working! Thanks to the developers...

Wow! Can confirm this is a lightning fast version!
Especially WIFI I've never seen so fast on FROYO build, could not believe my eyes, much appreciated!
(note: for some reason added modules and zkernel could not get WIFI to work, tried several things, but in the end changed to latest kernel (1253) and got amazing results!)
Camera would be nice, could you also check if "sound stuttering" is fixed in next build?
(as you probably already know, VirusCrazy managed to disable battery polling during sound playback in test kernel http://forum.xda-developers.com/showthread.php?t=883966)
Final note: keymapping is still wrong for blackstone, power button can be mapped to home, with long press to latest programs, see also http://forum.xda-developers.com/showthread.php?t=936601
All in all, great start, can't wait to see next steps!
Cheers,
Robbert
Blackstone, 524MHz, FROYO X 2011.02.02

littlewhitedog said:
Thank you, that helped.
Now testing other functionalities.
I changed end button mapping to "back home" as it seems it had same mapping as power button initialiy. I also put animations and transitions to fast.
I synchronized my google account and gmail/contacts/agenda are fine.
I'll keep you up to date. But, so far, this is definitely the best versions I ever tested. It is amazingly fast!
This is awesome work!
UPDATE1:
- Wifi : not OK.
This is a shame because as I do not have data plan, it means I can not download apps from the market without wifi, and I would really like to download some apps. I would really appreciate a fix!
- Gallery: OK
- SMS receive and send: OK
- Camera: Not OK
- Music Player: Partially OK because there audio stuttering (note: is this applicable to this version: http://forum.xda-developers.com/showthread.php?t=905085&page=4)
Click to expand...
Click to collapse
TRY USING THE OTHER kernel_module + ZIMAGE IN PACKAGE.........WIFI WORKS FOR ME

All thanks to tiad8 for making it possible on our blackstone!

welard said:
TRY USING THE OTHER kernel_module + ZIMAGE IN PACKAGE.........WIFI WORKS FOR ME
Click to expand...
Click to collapse
Thanks, it did the trick. I updated my first post and will keep testing!

littlewhitedog said:
Thanks, it did the trick. I updated my first post and will keep testing!
Click to expand...
Click to collapse
what about the battery ? does it stay alive for more than one day ?

tarmacmaster said:
what about the battery ? does it stay alive for more than one day ?
Click to expand...
Click to collapse
I will keep you up to date with the result after this week end. Today is not really a typical day because I rebooted a lot, changed versions this morning.

littlewhitedog said:
I will keep you up to date with the result after this week end. Today is not really a typical day because I rebooted a lot, changed versions this morning.
Click to expand...
Click to collapse
ok ! I'm looking forward to see how much it can stay alive with this FROYO

well
hmmmm
froyo X always worked for my blackstone

Hi
On my blackstone
WiFi don't work
Camera don't work (i try three kernels)
Can you help me?

Android on HTC Touch Pro Problem

Hi,
I want to install Android on my HTC Touch Pro and I want to also do that Dual Boot program. Problem is that I can't get android to work.
I downloaded Android, and it is not installing well. After I boot, the top bar of the Android comes, but it seems all grainy, and my mobile restarts :/ I tried changing to a different RAPH startup.txt, but it just crashes in the middle -.-
Pics: (sorry, they are HUGE)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any ideas anybody?!

Don't try changing to a different startup.txt! Make sure you're using the right file for your phone model. You could also try simply redownloading XDANDROID.

Which RAPH do you have?
Perhaps you need to read the FAQ.
Also, 1) don't take huge pics and post them to a thread - resize them and provide links if anything, although the pics seem useless TBH. 2) post in the build thread, don't create a new thread. Thanks.

@Ben_duder
I downloaded so many lol
@arrrgh
Thanks for that FAQ page, I know I have a RAPH100 now
1. Didn't notice how big they were until I posted them
2. Link to thread pls
Thanks for the help till now every1
EDIT: My download doesn't have RAPH100, but RAPH, RAPH500 and RAPH800 -.-
Is RAPH equivilant to RAPH100?
EDIT2: Ok, so i finally got a RAPH100 one, and it was installing. The last message was 'mp_dma : busy'
It kept on going after a bit, until screen calibration, i didn't even have the time to calibrate, as it kept on going.
Only to get 'stuck' on mp_dma : busy...again
Whilst writing this, it started again....only to get 'stuck'.....AGAIN...on mp_dma : busy....AGAIN!!
Is it normally like that? Does this site have live shat or smthn? Or can some1 PM their MSN/Skype so I can have 'live help' lol

Yes, it is "normal". What shouldn't be normal is the fact that you can't find the RAPH100 startup in the full bundle from THIS thread(for FroYo) or THIS thread (for Gingerbread). Keep in mind, FroYo is more complete and Gingerbread is still in alpha stages even though it seems more "stable" than FroYo.
Additionally, if you just want to be able to boot, the magic number we are looking for is 10 minutes. However, if you aren't getting to the XDAndroid boot animation, this might mean you aren't doing something right. Also, you'll need to grab the ts-calibration file for your device from either thread and put it in the same folder as haret

Hmm, I seem to have got it to work. It look me around 10 minutes to complete It seems ok (I downloaded the new XDAndroid from the official Wiki page). All works fine, incl. camera and Wi-Fi.
Now, I want to do the dual Boot thing. I have the exe downloaded, but now its a new set of CAB and EXT files. I'm going to opt for what seemes to be the newer version (v 1.0.6.0) but when i extract that and open a the file, I get 5 new files
Gen.Y DualBOOT QVGA v1.0.6.0 - Storage Card.cab
Gen.Y DualBOOT VGA v1.0.6.0 - Internal Storage.cab
Gen.Y DualBOOT VGA v1.0.6.0 - Storage Card.cab
Gen.Y DualBOOT WQVGA v1.0.6.0 - Storage Card.cab
Gen.Y DualBOOT WVGA v1.0.6.0 - Storage Card.cab
no idea what to do next.

If you have a RAPH100 use Gen.Y DualBOOT VGA v1.0.6.0 - Storage Card.cab. If you have a DIAM100 use Gen.Y DualBOOT VGA v1.0.6.0 - Internal Storage.cab
NOTE/hint
One installs to internal storage/soldered microSD and the other installs to the storage card/microSD

R^7Z said:
If you have a RAPH100 use Gen.Y DualBOOT VGA v1.0.6.0 - Storage Card.cab. If you have a DIAM100 use Gen.Y DualBOOT VGA v1.0.6.0 - Internal Storage.cab
NOTE/hint
One installs to internal storage/soldered microSD and the other installs to the storage card/microSD
Click to expand...
Click to collapse
Yeh i'll do that.
And I understood the Internal Storage and Storage card bit.
Also, I seem to get A LOT of lag when I play a game, is it normal? Probs coz the phone ain't too power full maybe

I did it, and it works well, it just tells me Android missing :S :S

Is haret in anything other than the root of the microSD? If not, it won't pick it up. There is a trick to get it to recognize the build in something other than the root of the microSD but you'll need to check in that thread where you got the dualboot program.

Yea the dualboot program is really a WinMo issue. You need to set the registry entry for it to work correctly.
But since it's not an Android or even an XDAndroid issue, I'd prefer you to post Gen.Y related questions in the correct section of the forum. Thanks.

@R^7Z
Haret is in Storage Card/bootand. And I forgot where I got the dualboot program though lol.
@arrrghhh
First of all, I'll thank you yest, as I'm restricted to 5 per day.
Also, link to where I can find this thread/section.
Thanks for all the help guys

In short if you want to use that program, you will need to visit the thread where you got the dualboot program from OR push everything up a level. In other words, cut and paste everything under the andboot folder to the root of the microSD and it should work like a charm, my friend!

R^7Z said:
In short if you want to use that program, you will need to visit the thread where you got the dualboot program from OR push everything up a level. In other words, cut and paste everything under the andboot folder to the root of the microSD and it should work like a charm, my friend!
Click to expand...
Click to collapse
What was the reason they told us to do an andboot folder then?

Well aside from "organization", not much else
I honestly only run one build because it is my preference to do so. Most who know what they are doing (or at least more than I do), use the rel_path=andboot option. "6 one way, half a dozen the other" is what I say.

R^7Z said:
Well aside from "organization", not much else
I honestly only run one build because it is my preference to do so. Most who know what they are doing (or at least more than I do), use the rel_path=andboot option. "6 one way, half a dozen the other" is what I say.
Click to expand...
Click to collapse
Well, apart from the fact that I understood NOTHING from that previous post, I want to say that it worked like a charm I cut all the files in the andbooot file to the right place, and what do you know, it worked!
I have a tiny thing to ask you guys Its laggy, and I mean VERY laggy. When i play games, like Angry Birds and such, it jumps, makes it tedious and not really fun to use. I do understand that my phone wasn't built for Android, and that Android needs higher system specs then Win Mobile (it also lags a bit on Win Mobile LOL) but maybe there is a fix to that.
When I check phone settings, it says I'm running Android version 2.2.2, which I think is the latest version, so maybe going to a previous version will make it better. I'm ready to take a small downgrade, only if I will still be able to use all my stuff (3G, camera, wi-fi etc.) I'm hoping to make Android my permanent OS, but with it being this laggy, I'd rather not.
Any ideas

[Roboto 4.1+ICS] Did I really get Link2SD working or not ?

Hi,
I've just successfully installed Rom RobotoMod and I got it working.Thanks to devs for their impressive work.
I chose CM9 when installing, and for SD management, I chose Bulent Apkinar's Link2SD.
Besides, I have to say that i run RobotoMod installation through ClockWorkMod 6.0.0.7
I have a 16-Gb microSD card. I also partitionned it using the ClockWorkMod recovery features. Now I have a Ext3 ( 2 Gb) + Linux Swap (256 Mb) + Fat32 Data Partition (~13 Gb).
After launching and configurating everything, I ran link2sd, and it successfully detected the Ext3 partition, and created the mounting scripts.
I chose AutoLink in the features, then I went in my explorer (ES Explorer) and installed some Apks.
When I came back in Link2SD to see the memory usage, I noticed something : Though it seems Apk data goes to the Ext3 partition, some files (I suspect them to be the dex files) remains in the internal memory. Even if they don't weight that much (1 ~7 Mb) compared to the Apk Data themselves, it causes the internal memory to decrease slightly.
My point is, does Link2SD really behave this way ? Isn't there a way to move everything to the Ext3 partition ?
Sorry If my question sees to be silly, I just wanted to ask.
And sorry for the english mistakes, I am french.
Thanks in advance.

Link2sd uses a little memory in internal memory. No need to ne afraid.
Open link2sd. Select user applications from the funnel icon. Then click menu, then select the ones u want to move to ext. Then click create link. Tik link application file, link dalvic cache files and link library files. Press ok.
It's pretty basic stuff.

Link2sd a l'inconvenient, en general, de ne pas "prevenir" le telephone qu'il a deplacé les fichiers d'une application.
Je te conseillerais plutot d'utiliser un script App2SD, ou tout simplement S2E (Play Store)
-----------
"You can overclock as much as you want, your phone will always seem too slow."

omnomnomkimiiee said:
Link2sd a l'inconvenient, en general, de ne pas "prevenir" le telephone qu'il a deplacé les fichiers d'une application.
Je te conseillerais plutot d'utiliser un script App2SD, ou tout simplement S2E (Play Store)
Click to expand...
Click to collapse
Well, Thanks (Merci)
J'essaierai aussi App2SD et Simple2Ext, probablement.
Mais qu'entends tu par " ne pas prévenir le téléphone" ? Parce que lorsque j'installe une application, Link2SD me notifie que l'app a été liée à a SD, via la barre de notifications, justement.
finance.resat said:
Link2sd uses a little memory in internal memory. No need to ne afraid.
Open link2sd. Select user applications from the funnel icon. Then click menu, then select the ones u want to move to ext. Then click create link. Tik link application file, link dalvic cache files and link library files. Press ok.
It's pretty basic stuff.
Click to expand...
Click to collapse
Thanks for the tip, but I already did that.
Fact is, I installed Link2SD first. Then I turned on the Auto-link feature.
Then I started installing all the others applications.
Well , lemme show you through pics (sorry they are in French, but I'll explain).
First of all, here is the current state of my SD Card (37 user-apps installed, all linked)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then, using a file explorer, I run two heavy apks. (Angry Birds and Angry Birds Space, for instance)
Back to Link2SD, you can see that those file seems to be linked do the SD card
Here are the details for one of the previously installed Apk
Now, here is the Info storage screen, just after installing those two Apps. It seems they were installed in Internal memory...Strange, huh ?
But, one interesting thing. If i reboot the phone, back to the info storage screen of Link2SD, I got something direct:
Well, my conclusion is that files are properly linked, but the system takes it into account only after restarting the phone.
Weird...
Any thoughts ?

Roland_Y said:
Well, my conclusion is that files are properly linked, but the system takes it into account only after restarting the phone.
Weird...
Any thoughts ?
Click to expand...
Click to collapse
This is perfectly normal behaviour for Link2SD. It fools the phone into thinking the apps are installed on the internal memory. It is rather like a shortcut in Windows-speak.

Roland_Y said:
Well, Thanks (Merci)
J'essaierai aussi App2SD et Simple2Ext, probablement.
Mais qu'entends tu par " ne pas prévenir le téléphone" ? Parce que lorsque j'installe une application, Link2SD me notifie que l'app a été liée à a SD, via la barre de notifications, justement.
Thanks for the tip, but I already did that.
Fact is, I installed Link2SD first. Then I turned on the Auto-link feature.
Then I started installing all the others applications.
Well , lemme show you through pics (sorry they are in French, but I'll explain).
First of all, here is the current state of my SD Card (37 user-apps installed, all linked)
Then, using a file explorer, I run two heavy apks. (Angry Birds and Angry Birds Space, for instance)
Back to Link2SD, you can see that those file seems to be linked do the SD card
Here are the details for one of the previously installed Apk
Now, here is the Info storage screen, just after installing those two Apps. It seems they were installed in Internal memory...Strange, huh ?
But, one interesting thing. If i reboot the phone, back to the info storage screen of Link2SD, I got something direct:
Well, my conclusion is that files are properly linked, but the system takes it into account only after restarting the phone.
Weird...
Any thoughts ?
Click to expand...
Click to collapse
phishphinger said:
This is perfectly normal behaviour for Link2SD. It fools the phone into thinking the apps are installed on the internal memory. It is rather like a shortcut in Windows-speak.
Click to expand...
Click to collapse
Yeah thats true, I once post about this problem. But no one replied anyways, it gives me low memory notification everytime.
So I switched to data2sd again. But Link2sd is faster than data2sd. U dont need to restart, just click menu->multiselect->selectall->actions->createlink->tik all->Ok. It will relink and re calculate free memory.
As tigger suggested I also think the auto link feature should be disabled. Its faster.
See my screenshots.
before & after createlink
and by the way cm9 is not good at games and video play back, also consumes lots of battery and no fm radio. and I cant live a day without radio.

Okay, I think the problem's solved now. Thanks all for the answers.
@finance.restat: Wait, are you running Gran Theft Auto on a Wildfire S ? :highfive:
What version is it ?

It's GTA III 10 year anniversary version 1.0.
Data file has to be downloaded from software and then from xda for smoother playback. Check in apps section u'll see the post. May be few pages behind.
Only dust and cake kernels can play it.