Related
So I bought a car usb charger that claimed it was rated at 1 amp. Using both my blackberry and HTC oem usb cables it will only show up as a USB charger (500ma).
This is not exactly enough to charge the phone while using 3g, gps, full screen brightness, etc. I'm looking for a good confirmed 1 amp hardwire (not using a usb cable) car charger and home charger. I used my sisters Samsung charger (rated at 700ma) and it charged it quicker than with the OEM htc charger.
And I would like to try and get ones that are confirmed to show up as fully charging the phone. I would appreciate some insight
Sent from my PC36100 using XDA App
And now that I think about it,
I would like to be able to use my Amazon prime for a change, so amazon links would be nice
Sent from my PC36100 using XDA App
I went through a few different car chargers, so I can help you out here. I bought the Belkin car charger recommended here in another thread, low profile and rated at 1A, but my phone only recognized it as USB and charging was fairly slow, extended road trips using video recording and navigation while plugged in would drain my battery over time.
I used my friend's palm pre home charger and it worked very well, so I went on to Amazon and bought the "palm vehicle charger". The one I got in the mail (from Park Deals) was DOA, wouldn't turn on at all (I emailed Park Deals and they sent me a new replacement free of charge, didn't even have me ship back the defective one). I called the local radio shacks and found one in stock at $9.99 (radio shack isn't carrying palm anymore, so the accessories are on closeout but hard to find in stock). Works like a charm, the phone recognizes as AC charging, the phone still charges while running navi or recording video.
My friend got a cheapo car kit on ebay, came with rubberized case, mount that fits the evo with the same case on, and a cheap unlabeled car charger with a bungie type cord. I tried this on my phone, my evo recognizes it as AC also, so I assume it would charge well if it's rated at 1A. I've seen several other cheapo car chargers rated at 1A as well.
Another thread here on XDA says that if you modify your charger/cable by altering the middle data pins you can get the phone to believe the usb port is plugged into the wall and draw full current from the charger. I tried covering the two middle pins with a piece of paper and plugging it in, but this didn't work for me. The other methods involved shorting the two data pins together, I didn't really want to waste a cable or mess up a charger and potentially my phone so I just bought a different charger. Another thread mentioned buying a specific rocketfish usb cable had a similar effect.
nhutpham said:
I went through a few different car chargers, so I can help you out here. I bought the Belkin car charger recommended here in another thread, low profile and rated at 1A, but my phone only recognized it as USB and charging was fairly slow, extended road trips using video recording and navigation while plugged in would drain my battery over time.
I used my friend's palm pre home charger and it worked very well, so I went on to Amazon and bought the "palm vehicle charger". The one I got in the mail (from Park Deals) was DOA, wouldn't turn on at all (I emailed Park Deals and they sent me a new replacement free of charge, didn't even have me ship back the defective one). I called the local radio shacks and found one in stock at $9.99 (radio shack isn't carrying palm anymore, so the accessories are on closeout but hard to find in stock). Works like a charm, the phone recognizes as AC charging, the phone still charges while running navi or recording video.
My friend got a cheapo car kit on ebay, came with rubberized case, mount that fits the evo with the same case on, and a cheap unlabeled car charger with a bungie type cord. I tried this on my phone, my evo recognizes it as AC also, so I assume it would charge well if it's rated at 1A. I've seen several other cheapo car chargers rated at 1A as well.
Another thread here on XDA says that if you modify your charger/cable by altering the middle data pins you can get the phone to believe the usb port is plugged into the wall and draw full current from the charger. I tried covering the two middle pins with a piece of paper and plugging it in, but this didn't work for me. The other methods involved shorting the two data pins together, I didn't really want to waste a cable or mess up a charger and potentially my phone so I just bought a different charger. Another thread mentioned buying a specific rocketfish usb cable had a similar effect.
Click to expand...
Click to collapse
That was me on both accounts. Love my rocket fish cable. Bought the 12v/usb converter for the car and whether or not i use the pc or car to charge, it shows as ac charger on the phone. I use this cable on all my pc's as well as the usb outlet in my vehicle.
This is the charger that I bought from amazon. It shows up as charging from AC (instead of USB) charging. It's available for Amazon Prime for under $6:
The Motorola P513 micro-usb charger.
Ok so I ended up with the Moto 513 charger as well (950ma rated)
http://www.amazon.com/Motorola-Vehi..._1_5?ie=UTF8&s=wireless&qid=1280759739&sr=8-5
But I cant find any AC chargers under prime that are 1000ma
investinwaffles said:
Ok so I ended up with the Moto 513 charger as well (950ma rated)
http://www.amazon.com/Motorola-Vehi..._1_5?ie=UTF8&s=wireless&qid=1280759739&sr=8-5
But I cant find any AC chargers under prime that are 1000ma
Click to expand...
Click to collapse
this one works great. I have it.
Ok, so I found an OEM Nokia for the N97 that is rated at 1200ma. Is this safe to buy for my phone?
http://www.amazon.com/Nokia-Origina..._1_2?ie=UTF8&s=wireless&qid=1280760676&sr=8-2
Auction with more specifics of the charger:
http://cgi.ebay.com/NOKIA-US-AC-10U...ccessories&hash=item414e190fa7#ht_2800wt_1026
There's a nokia micro usb charger for $6.99 available for Amaazon Prime. The model number is AC 6U. ASIN: B0030T0ULW
I'm charging with the scosche reviveII at 2.1 amps without any problems.
linhpham2 said:
There's a nokia micro usb charger for $6.99 available for Amaazon Prime. The model number is AC 6U. ASIN: B0030T0ULW
Click to expand...
Click to collapse
From this ebay listing it looks like the AC-6U is only a ~600ma charger:
http://cgi.ebay.com/NOKIA-CELL-PHON..._Accessories&hash=item5639f88b1c#ht_500wt_721
I think ill spend the extra few bucks on the 1200ma charger, I don't think ill have any problems (and i have the best buy warranty also so I'm not too worried).
linhpham2 said:
I'm charging with the scosche reviveII at 2.1 amps without any problems.
Click to expand...
Click to collapse
How fast does it charge?
One the 2.1 amp port, the Evo only charges at 1 amp. The Evo doesn't charge any faster with this charger than any other 1 amp charger.
linhpham2 said:
One the 2.1 amp port, the Evo only charges at 1 amp. The Evo doesn't charge any faster with this charger than any other 1 amp charger.
Click to expand...
Click to collapse
Gotcha, thanks for the info.
I just ordered a Rocketfish cable. We'll see how that works.
Would be nice if they made a Y-cable to get 1amp from 2 USB ports in a PC. I mean, I know they MAKE cables like this but I read somewhere that HTC phones were designed to still only charge at 500mAh even with one of those.
Dunno.
It depends on what you're using as a charging source. When usb charging on my home pc or car, it's AC charging at 1 amp.. But if I'm charging with my Energizer external battery, it's only USB charging at 0.5 amp. This is using the same usb cable.
iGo
Would anyone happen to know what an iGo tip (A97) delivers? I am trying to rig up a custom solution that is hard-wired, but uses iGo tips so I don't have to use the cigarette lighter plug and I have the flexibility at the corner of my windshield to swap tips for different devices.
Right now, I have a 4-port USB hub installed under the dash that is 12v powered. I then use a proprietary iGo cable that uses a standard PC style USB connector on one end and then terminates into an iGo tip connector at the other end. That USB cable runs up to the corner of the windshield so I can swap tips at will.
If I use the iGo A97 tip on their cigarette lighter adapter, it seems to charge, but I am not sure at what rate. If I try to use the A97 tip on the USB hub, it charges for about 2 seconds, and then the light goes out. The Evo does not seem to like the custom arrangement, yet all my other micro usb devices do not seem to have any issues and charge just fine...
Thanks,
-Rob
I can attest to the Moto 513 working fine - it has served me very well on my Evo and the Treo Pro before it.
Unfortunately it is a big ass charger though - wish there was a good micro option.
How do u determine how much power its actually charging at or if its not using the full 1amp rating?
_______________________________
Sent from my EVO 4G
robroy90 said:
Would anyone happen to know what an iGo tip (A97) delivers? I am trying to rig up a custom solution that is hard-wired, but uses iGo tips so I don't have to use the cigarette lighter plug and I have the flexibility at the corner of my windshield to swap tips for different devices.
Right now, I have a 4-port USB hub installed under the dash that is 12v powered. I then use a proprietary iGo cable that uses a standard PC style USB connector on one end and then terminates into an iGo tip connector at the other end. That USB cable runs up to the corner of the windshield so I can swap tips at will.
If I use the iGo A97 tip on their cigarette lighter adapter, it seems to charge, but I am not sure at what rate. If I try to use the A97 tip on the USB hub, it charges for about 2 seconds, and then the light goes out. The Evo does not seem to like the custom arrangement, yet all my other micro usb devices do not seem to have any issues and charge just fine...
Thanks,
-Rob
Click to expand...
Click to collapse
Should pull 1A off the Igo
how do i determine if its recognizing a charger as ac versus usb? could this be rom specific? it seems to charge much faster with cyanogen than it did with damagecontrol
Ive been using my OEM charger cord untill the other day it fell off my desk while charging and bent the tip. I started using another cheap 99 cent ebay cord with a blackberry logo on it and it seems like my phones never charged slower. So I installed current widget and it seems to be charging at 280MA while the OEM cord charges at 380MA. Does anyone know where I can get a new cord that charges just as good as the OEM one for cheap?
Amazon has the HTC cord identical to the one that comes with the phone for like $6. My phone charges at around 800ma with the screen off. I suggest spending the extra $5.
skittlesV1 said:
Ive been using my OEM charger cord untill the other day it fell off my desk while charging and bent the tip. I started using another cheap 99 cent ebay cord with a blackberry logo on it and it seems like my phones never charged slower. So I installed current widget and it seems to be charging at 280MA while the OEM cord charges at 380MA. Does anyone know where I can get a new cord that charges just as good as the OEM one for cheap?
Click to expand...
Click to collapse
FWIW, it might be worth mentioning that your battery will actually last longer if you charge it with lower amperage. The downside to this, is that it will also take longer to charge.
In fact, your battery's overall life expectancy will also be longer using lower amperage charging.
Just thought I'd mention it.
--Chris
jdbiggles said:
Amazon has the HTC cord identical to the one that comes with the phone for like $6. My phone charges at around 800ma with the screen off. I suggest spending the extra $5.
Click to expand...
Click to collapse
Do you have the link to this still? im having a hard time finding it
i am about to try a few from monoprice.com
too cheap not to try
You can buy the original charger, and cord off ebay from a guy for 10$ shipped..when i bought mine, he had 10 left.
nolig2278 said:
i am about to try a few from monoprice.com
too cheap not to try
Click to expand...
Click to collapse
I use monoprice cables. Seems to work fine, although, I never tested charge speed.
did you guys get the USB charge cable with your EVO? I never got one. All I have is AC charge cable, and using my wife's moment USB Charge Cable, and works fine.
Typical Micro USB cables (like those from monoprice.com, awesome btw) don't charge my for-work Blackberry Curve.
Go figure. I hate Blackberries.
Correct me if I'm wrong but that micro usb cable that came with your evo can be plugged into a usb port or the wall charger itself, and it can even be plugged into a car charger hat accepts usb cables.
Sent from my PC36100 using XDA App
potna said:
Correct me if I'm wrong but that micro usb cable that came with your evo can be plugged into a usb port or the wall charger itself, and it can even be plugged into a car charger hat accepts usb cables.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
I'm doing this now, charging my phone from my car charger that accepts USB cables. It charges REALLY slow however, I'll check to see at what amperage.
potna said:
Correct me if I'm wrong but that micro usb cable that came with your evo can be plugged into a usb port or the wall charger itself, and it can even be plugged into a car charger hat accepts usb cables.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
No reason to correct you - you are absolutely correct on all counts.
--Chris
I'd like to buy a new and extra cable (not the charger) to connect my device to my computer and charge it then as well.
Apparently this kind of cable, micro data usb, seems to be universal. Is it really so as I don't want to damage it if I buy a generic cable.
Any help me would be great
I was also wondering this because I would like to buy a much longer cable since my power outlet is far from my bedside table.
The cables are universal, so any length would work for charging (data transfer not guaranteed).
Actually they are not that universal. While I dont have any technical specs there are quite large differences.
eg a PC USB slot will only deliver 500 mA UNLESS certain pins are connected that allows the connected device to tell the PC that it can take more than 500 mA. They will look the same but 1 cable will only deliver 500 mA & a different cable could deliver 1000 mA.
Another cable might be wired up for delivering power only from a USB slot or from the wall adapter, but at the same time not be able to do any data transfer.
To be sure I bought an Htc official cable.
You could always just buy a usb extender. That way you can use it for multiple things.
USB cables
Sorry to revive a dead thread, but there is some unclear info in here that I thought I could clear up:
Micro-USB cables are universal in the sense that they will all fit and to one degree or another charge your phone. The combination of the charger and the cable, however can yield wildly different charge rates. If you want fast charging:
1. Look at the small print on your wall charger and see what current level it will output. You're looking for something 1 amp or higher. Some chargers will say something like 500ma, which is 500 milliamps or half an amp, and that's slower.
2. Consider buying a special "charging" cable. These cables use the USB power that would normally be used for data to charge the battery faster, and thus they won't work as data cables when plugged into your computer. Here's an example of a charging cable from Amazon:
http://www.amazon.com/Mediabridge-U...1367955673&sr=8-2&keywords=usb+charging+cable
Basically what you want to look for on your One V is in the power settings for the phone it should say "Charging (AC)" when you plug it in and *not* "Charging (USB)". With the AC setting you know you're getting as much charging power as you can get.
I use my old Blackberry charge/USB cable with my One V without issue.
same here lol
Sent from my One V using xda premium
martijn99 said:
same here lol
Sent from my One V using xda premium
Click to expand...
Click to collapse
Glad I'm not the only one!
hahaha i because of the short lenght of original cable and it makes an irritating noisy sound xD
Sent from my One V using xda premium
martijn99 said:
hahaha i because of the short lenght of original cable and it makes an irritating noisy sound xD
Sent from my One V using xda premium
Click to expand...
Click to collapse
Yeah, I don't even use my HTC cable anymore. I originally stopped using it because I dropped my phone while it was plugged into it and it bent the connector. However, I HATED how short it was!! Then, I noticed that my Blackberry cable had the same end on it, and I've been using that for USB tethering, and I use my Samsung bluetooth earpiece charger to just charge my One V. lol
Oh, and I use the HTC USB to wall socket adapter to plug in my ecig. XD
ah nicee!
Sent from my One V using xda premium
zombiegirl2010 said:
Yeah, I don't even use my HTC cable anymore. I originally stopped using it because I dropped my phone while it was plugged into it and it bent the connector. However, I HATED how short it was!! Then, I noticed that my Blackberry cable had the same end on it, and I've been using that for USB tethering, and I use my Samsung bluetooth earpiece charger to just charge my One V. lol
Oh, and I use the HTC USB to wall socket adapter to plug in my ecig. XD
Click to expand...
Click to collapse
I unintentionally bought some blackberry ones to have in my car, at my PC, at work, etc and they work great for me. I am just really careful about the wall adapter output because using my dad's tablet charger with micro usb killed my wife's optimus t.
Specs aren't listed and I've already wasted money on 2 car chargers that don't charge my note 2, despite being touted to do so.
Sent from my SPH-L900 using xda app-developers app
Well..they charge him, but in slow mode. Connect your phone and go to Settings->Battery..and you will see one of this "Charging (USB)" or "Charging (AC)". If it says USB, then you only have 500 mA, and AC gives you max from your charger. Original charger for Note 2 is 2A. So, I doubt that any car charger will give you that amount of electric charge. It can help, but it is a really slow process.
Sent from my GT-N7000 using xda premium
Does your cigarettlighter-outlet in your car working?
I'm using a SonyEricsson MicroUSB car charger bought and used with the SE Xperia X10 Mini in 2010. It does easily charge the Note1 while using Google Navigate+GPS and the Spotify (Via Bluetooth with the car stereo).
this subforum for N7000, I suppose?
Sent from my GT-N7000 using xda app-developers app
I purchased a splitter from Amazon that came with 2 cigarette and 2 USB connections. I used the cable that came with my N7000 originally and plugged that in and it works fine. You can go on eBay and search for 2ah USB cigarette charger and just use the cable that came with the note to charge it up.
I wouldn't buy any longer cables as it seems to slow down the charging process by quite a bit.
hi
i have ipod 2port usb car charger
usb 1: 2.1 A
usb 2: 1.2 A
i use 1.2A and charge my note very good and fast
thanks
I have this one working great ^^
http://www.amazon.fr/gp/product/B005ZHD3FW/ref=oh_details_o08_s00_i00?ie=UTF8&psc=1
Don't know if I could post this link, so excuse me and delete it if it's forbidden
Anyone know of a good source to get an OEM cord that will properly charge in the car? Tried monoprice and a couple others and they appear to be charging but don't actually charge.
sent from my hammerhead
Anyone?
sent from my hammerhead
http://forum.xda-developers.com/showthread.php?p=51825009
Sent from my Nexus 5 using Tapatalk
If you are trying to charge from a USB port built in to your car, you are only going to get a 500mA current which isn't enough to charge your phone if you're using navigation or anything.
For a charger that will work well in the car, look at the Anker PowerIQ charger.
http://www.amazon.com/Anker®-Dual-P...&qid=1397483180&sr=8-6&keywords=anker+poweriq
Both ports will charge Android devices or iPhones at the full rate.
raptir said:
If you are trying to charge from a USB port built in to your car, you are only going to get a 500mA current which isn't enough to charge your phone if you're using navigation or anything.
For a charger that will work well in the car, look at the Anker PowerIQ charger.
http://www.amazon.com/Anker®-Dual-P...&qid=1397483180&sr=8-6&keywords=anker+poweriq
Both ports will charge Android devices or iPhones at the full rate.
Click to expand...
Click to collapse
if u turn off ur screen & only listen to the directions, it will charge, but if u want to see where ur going, the battery will remain flat. power in = power out.
raptir said:
If you are trying to charge from a USB port built in to your car, you are only going to get a 500mA current which isn't enough to charge your phone if you're using navigation or anything.
For a charger that will work well in the car, look at the Anker PowerIQ charger.
http://www.amazon.com/Anker®-Dual-P...&qid=1397483180&sr=8-6&keywords=anker+poweriq
Both ports will charge Android devices or iPhones at the full rate.
Click to expand...
Click to collapse
Whaaaaaat?? Cars can put out more than 500ma
Sent from my Nexus 5 using Tapatalk
Ben36 said:
Whaaaaaat?? Cars can put out more than 500ma
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
If the port is a charging-only port, sure. But most are charging + data ports.
I have a car charger but for some reason the cables I've gotten don't charge properly, even though it looks like it is.
sent from my hammerhead
Ben36 said:
Whaaaaaat?? Cars can put out more than 500ma
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
It varies dramatically from car to car, even from year to year. Generally, if it doesn't look like it's charging much, if at all, it's because it's not putting out enough amps, period.
ldubs said:
I have a car charger but for some reason the cables I've gotten don't charge properly, even though it looks like it is.
sent from my hammerhead
Click to expand...
Click to collapse
How have you determined that it is the cable and not the charger? It is much more likely that a charger would be defective than a cable.
raptir said:
How have you determined that it is the cable and not the charger? It is much more likely that a charger would be defective than a cable.
Click to expand...
Click to collapse
because I had an OEM cable working fine in the charger, but the tiny clips at the end got bent down and now it doesn't stay seated properly in the charging port, so I tried a couple of places (Amazon, Monoprice) to get a replacement OEM charging cable - I have a dual port charger and have tried both ports with the replacement cables. They appear to charge (battery icon spins, using Mahdi Rom) my phone but when I get home the battery level is lower than when I plugged it into the car. Hence my quest to find an OEM charging cable, with the proper tiny clips so it stays properly seated, that I can use in the car. Monoprice cable fits nicely in the charging port, but doesn't seem to charge the phone. Not sure if there are data-only cables made but these were advertised as charging/sync cables...
Well, Monoprice has a lifetime guarantee so if you received defective cables they will replace them. I use both the Monoprice Premium cable and the standard cable and have no issue with any charger.
http://www.monoprice.com/Product?c_id=103&cp_id=10303&cs_id=1030307&p_id=9762&seq=1&format=2
http://www.monoprice.com/Product?c_id=103&cp_id=10303&cs_id=1030307&p_id=4868&seq=1&format=2
The only issue I run into is that one of my chargers is an iPhone charger and thus shows as "Charging (USB)" when you go to the Battery menu. That means they will only charge at 500mA which is not enough power to keep the phone running as a GPS. This Anker PowerIQ charger plus either of the Monoprice cables charges my phone without any issue (displays "Charging (AC)") while using the phone as a GPS.
http://www.amazon.com/Anker®-Dual-P...&qid=1397483180&sr=8-6&keywords=anker+poweriq
Edit: Also, when you say "OEM cable" do you mean the one that came with your Nexus 5 or the cable that came with your charger (since both are provided by the manufacturer of the equipment)? If it's the one that came with your Nexus 5 it is probably just that you received a defective cable since the Nexus 5 cable is a standard sync + charge cable. If it came with your charger it may be that your charger uses the iPhone spec and needs a charge only cable to properly charge an Android phone.
raptir said:
Well, Monoprice has a lifetime guarantee so if you received defective cables they will replace them. I use both the Monoprice Premium cable and the standard cable and have no issue with any charger.
http://www.monoprice.com/Product?c_id=103&cp_id=10303&cs_id=1030307&p_id=9762&seq=1&format=2
http://www.monoprice.com/Product?c_id=103&cp_id=10303&cs_id=1030307&p_id=4868&seq=1&format=2
The only issue I run into is that one of my chargers is an iPhone charger and thus shows as "Charging (USB)" when you go to the Battery menu. That means they will only charge at 500mA which is not enough power to keep the phone running as a GPS. This Anker PowerIQ charger plus either of the Monoprice cables charges my phone without any issue (displays "Charging (AC)") while using the phone as a GPS.
http://www.amazon.com/Anker®-Dual-P...&qid=1397483180&sr=8-6&keywords=anker+poweriq
Edit: Also, when you say "OEM cable" do you mean the one that came with your Nexus 5 or the cable that came with your charger (since both are provided by the manufacturer of the equipment)? If it's the one that came with your Nexus 5 it is probably just that you received a defective cable since the Nexus 5 cable is a standard sync + charge cable. If it came with your charger it may be that your charger uses the iPhone spec and needs a charge only cable to properly charge an Android phone.
Click to expand...
Click to collapse
I meant the cable that came with my Nexus (or maybe it came with my wireless charger). Car charger didn't come with a cable, I got this one:
http://www.amazon.com/gp/product/B006SU0SX0/ref=wms_ohs_product?ie=UTF8&psc=1
Like I said, it was working fine with the original cable until the tiny pins got bent and it no longer stays seated in the charging port properly. I have the 3 foot version of that monoprice cable.
ldubs said:
I meant the cable that came with my Nexus (or maybe it came with my wireless charger). Car charger didn't come with a cable, I got this one:
http://www.amazon.com/gp/product/B006SU0SX0/ref=wms_ohs_product?ie=UTF8&psc=1
Like I said, it was working fine with the original cable until the tiny pins got bent and it no longer stays seated in the charging port properly. I have the 3 foot version of that monoprice cable.
Click to expand...
Click to collapse
Then the only thing I can think of is that you received a defective cable. I use this charger with the monoprice cable and have no issue:
http://www.amazon.com/Anker®-Dual-P...&qid=1397483180&sr=8-6&keywords=anker+poweriq
raptir said:
Then the only thing I can think of is that you received a defective cable. I use this charger with the monoprice cable and have no issue:
http://www.amazon.com/Anker®-Dual-P...&qid=1397483180&sr=8-6&keywords=anker+poweriq
Click to expand...
Click to collapse
I chatted with monoprice and after I sent them a link to the car charger I'm using, they found it has both a 2.4 amp and a 1 amp slot. Said to try the 2.4 amp slot and see if that helps. I'll report back...
ldubs said:
I chatted with monoprice and after I sent them a link to the car charger I'm using, they found it has both a 2.4 amp and a 1 amp slot. Said to try the 2.4 amp slot and see if that helps. I'll report back...
Click to expand...
Click to collapse
The 2.4A slot is designed using the Apple spec and won't charge the Nexus 5 properly. Once you plug it in check under the Battery menu. If you see "Charging (USB)" then it is capping at 500mA.
raptir said:
The 2.4A slot is designed using the Apple spec and won't charge the Nexus 5 properly. Once you plug it in check under the Battery menu. If you see "Charging (USB)" then it is capping at 500mA.
Click to expand...
Click to collapse
hmm that could be a problem. will check later and see what's what.
raptir said:
The 2.4A slot is designed using the Apple spec and won't charge the Nexus 5 properly. Once you plug it in check under the Battery menu. If you see "Charging (USB)" then it is capping at 500mA.
Click to expand...
Click to collapse
Actually it does charge the phone quite nicely with the monoprice cable. Maybe problem solved. It shows charging ac. I'll let it run for a few days and see how it is.
sent from my hammerhead
This is the best car charger period.
http://www.amazon.com/Motorola-Vehicle-Adapter-micro-USB-Charger/dp/B000S5Q9CA