Ok guys so in a nutshell here's the problem. I have a rooted EVO that's I've been playing with for over two months. I used to have amazing 3G at home especially, like over 1.5 mbps minimum 800 kpbs at peak. Since about 2 nights ago after updating MikG 2.15 to 2.2 I've been stuck at 1x and can't get 3G to hold. It's not an AOSP vs Sense interpretation issue since there is an actual performance issue. Speed tests won't even load and if they do it's like 15kpbs and web sites do not load or take minutes to load google.com
4G is intact and when I went to work today I noticed in the car I got a 3G lock however speeds were around 500k so it has something to do with location but sprint as well as my 3 other phones in the house confirm it's not an area disruption. I've wiped all, calkulin wipe, reflashed, nandroid restored, EPST restored, tried different sense and AOSP, reflashed latest radio combo, prl and profile updated... Pretty much everything. If it matters I did have this problem when I first got the evo prior to rooting and sprint tech told me to so the EPST restore and that worked like magic but the problem then was my 3G didn't work anywhere, home or work.
Is there anything I'm missing or do I need to figure out how to remove all traces of root and head to sprint? (if so an tips on standard procedure would be appreciated like about sd card censoring etc)
Currently latest OTA rom rooted 4.24
Latest radio combo
Prl 60680 (which I'd like to blame actually considering 3g lock at work I think I was good with 0115 or whatever prior was but can't find file or get epst to load ##776# )
not sure to confirm hardware version if that matters cuz I've had it read out both as 003 and 002. I got the phone at the end of April rooted it may 24 via unrevoked.
Really bummed out and any advice appreciated. Once again I've spent two days googling and looking through forums and tried all options but mine seems to be resistant so please avoid the "google" it advice. One forum post on Androidforums seemed like my issue but it was also unreplied to unfortunately.
Your user profile password could have changed. It can change for a number of reasons, but one example is you to switch to a different phone on your Sprint phone line while you had somebody else root your phone for you and then switching back when he returns it. Flash to a ROM that has "Update Profile" and update you profile username.
Also sometimes you can get slower 3G speeds if you let your phone "Update PRL". So cancel the PRL update if your phone tries to update after you "Update Profile".
TiOeM said:
Your user profile password could have changed. It can change for a number of reasons, but one example is you to switch to a different phone on your Sprint phone line while you had somebody else root your phone for you and then switching back when he returns it. Flash to a ROM that has "Update Profile" and update you profile username.
Also sometimes you can get slower 3G speeds if you let your phone "Update PRL". So cancel the PRL update if your phone tries to update after you "Update Profile".
Click to expand...
Click to collapse
Thanks for the reply. I always had the phone on me and thats why I went back to a sense rom. I've updated profile and reset it too canceling prl update. Even tried all the tweaks out there. Finally gave in and called sprint, they pushed something OTA during a battery pull probably profile cuz it did same thing on reboot. It brought me up to like 100-200 kbps since that didn't work their grand solution was offering me a free airman access point which is awesome since I didn't even know about it or ask for it but that still leaves me helpless outside my home which is where a cell phone is meant to be lol
Something to note is I just updated to the 11114 PRL posted 7/17 and I'm moving around 400-500 Kbps which is technically 3G but crap still especially when I did have fast speeds. I'm about to give up, gonna chalk it up to sprint service issues they won't admit to and it can't be throttling because my 5 lines use less than the average heavy user uses on one line. Another week of this and I'll probably have to unroot and head to store, especially if airvana doesn't help.
Related
so i thought i did the right thing...to start from the top...my old evo broke...got a new evo...didnt update the prl...rooted/flashed a new rom and boom...my internet blows...its stuck on 1x...so..i flashed a sense rom...updated the prl...now im missing something because when i go back to the roms i wanna use...its still stuck on 1x...what am i doing wrong?
phillyzxp said:
so i thought i did the right thing...to start from the top...my old evo broke...got a new evo...didnt update the prl...rooted/flashed a new rom and boom...my internet blows...its stuck on 1x...so..i flashed a sense rom...updated the prl...now im missing something because when i go back to the roms i wanna use...its still stuck on 1x...what am i doing wrong?
Click to expand...
Click to collapse
You're most likely not doing anything wrong. I assume you're using an AOSP rom. Aosp roms show your true signal, if you're on 3g or 1x. Sense roms show 3g all the time, even if you're on 1x. Sense lies to you. Aosp shows the truth. Although there is now a mod that allows you to see true signal on Sense as well now.
Sent from my PC36100 using XDA App
phillyzxp said:
so i thought i did the right thing...to start from the top...my old evo broke...got a new evo...didnt update the prl...rooted/flashed a new rom and boom...my internet blows...its stuck on 1x...so..i flashed a sense rom...updated the prl...now im missing something because when i go back to the roms i wanna use...its still stuck on 1x...what am i doing wrong?
Click to expand...
Click to collapse
A PRL is a "preferred roaming list" and has nothing to do with data speeds unless you're talking about data speeds when you're roaming. Do you mean that you are getting no 3G coverage at all?
phillyzxp said:
so i thought i did the right thing...to start from the top...my old evo broke...got a new evo...didnt update the prl...rooted/flashed a new rom and boom...my internet blows...its stuck on 1x...so..i flashed a sense rom...updated the prl...now im missing something because when i go back to the roms i wanna use...its still stuck on 1x...what am i doing wrong?
Click to expand...
Click to collapse
Are you sure you are getting 3g at all? Sense doesnt tell you when you are on 1x unless you grab an app for that. Are the 1x culprits all aosp and you are just under the impression you are getting 3g on sense when in all reality you are not? Run a few speedtest.net tests and let us know what your speeds are on both on both. I doubt your speed changed.
hmmm...interesting....well im running MIUI...but its weird...because i used to get good signal...i wonder if maybe this is tying in too all the problems it seems a lot of people are having...im gonna run the speed test right now and see
signal and speed arent necessary related, though i believe aosp does calculate that into theirs. On sense it is (almost?) always separate. Anyhow I have only seen a few phones get "stuck" internally at 1x, no worries that would also be fixable.
You may just be having tower issues, thank sprint for that. Another good question is do you get 3g on a diff tower? drive out of the range of your current tower and see what ya get.
yea im gettin a steady 1x from home all the way to work which is about 15 miles away...
my first test:
Ping: 558ms Dl:125 Ul:148
second test:
ping: 807ms Dl: 126 Ul: 140
3rd:
ping: 786ms dl: 126 ul: 143
im not too knowledgable about this stuff....but i feel like the numbers are good right?
No, those are def 1x speeds. Sprint average is 540k. Being that you have used multiple towers i would assume its the phone. Grab easy settings from triforce, luke and see what the settings are. If you cant get back to 3g you may want to grab the 2g/3g toggle from triforce, luke for a buck and set it to hybrid or evdo only and see if that works. Its the only thing that helped me once.
I tried profile restores, other prls, everything. Have you tried any other prls? I wouldnt suggest a profile restore because you dont have 3g and it needs that to provision.
Have you gone into ##3282# (sense rom), and cleared your profile data (top item, then menu IIRC). This will cause the phone to reboot, and do an OTA activation on the subsequent boot.
Have you messed with your 3g settings - meaning, is the device being forced into cdma mode only??
Which rom did you specifically flash?
And I guess most importantly, before you did anything, did you ensure 3g/4g work with the phone in its stock state?
gpz1100 said:
Have you gone into ##3282# (sense rom), and cleared your profile data (top item, then menu IIRC). This will cause the phone to reboot, and do an OTA activation on the subsequent boot.
Have you messed with your 3g settings - meaning, is the device being forced into cdma mode only??
Which rom did you specifically flash?
And I guess most importantly, before you did anything, did you ensure 3g/4g work with the phone in its stock state?
Click to expand...
Click to collapse
I had this same issues awhile back and the quoted text is what worked for me.
you can try a profile restore but it may not activate well without 3g. Sprint told me that themselves, so have others...though it did activate for me, i have seen people get stuck though for a bit...
well...from what i understand i guess i have no idea if 3g was working before...i know 4g did work fine...and it still works weather im using the wimax setting on a sense rom or even before i rooted it....so somebody give me a run down of what to try...i read a lot of those suggestions...and to be totally honest...i have no idea what too do...like i said im kinda new to this whole thing
nevermind...i found the thread with the whole step by step process...thanks for your help guys...i got it up and running
My speed tests are returning obnoxious speeds like 700ms with 0.1 down and 0.4 up. (Measuring in Mbps.) It is absolutely ridiculous. My wife's LG Optimus S gets 130ms/5/3.5 running at the exact same time, side by side. I can't figure out what is going on. I've changed the radio, updated the PRI, changed ROMs and kernels. I'm running out of ideas and I really hope it isn't a hardware problem (don't want to be phone-less.) The only odd thing I can find is that my PRL version is 01115. But I don't think that really has anything to do with my 3G speeds but odd none the less. I found a screenshot that someone else has a PRL version over 6xxxx.
I dont put much stock in those speed and benchmark tests
chefdave12118 said:
I dont put much stock in those speed and benchmark tests
Click to expand...
Click to collapse
Youtube constantly buffers and web page loading is abysmal.
have you tried the "tweak" that is in the dev forums? the one about removing the proxies from the data config.
LINK
chefdave12118 said:
I dont put much stock in those speed and benchmark tests
Click to expand...
Click to collapse
If there's any testing that's viable is the speed tests. Benchmarks are the useless ones.
I didn't think I had problems until I tried someone's suggestion on the Mik forums.
On your sense rom;
dial ##3282# > choose edit mode > when prompted enter your MSL number* > choose data profile > hit menu button, then choose restore
This process will reboot your phone, reactivates handset, and updates profile and prl. It'll try to update firmware at the end too but I just hit cancel after that showed up. After I did this, I was getting 3g speeds of over 2mbs when I was previously getting less than 500kbs.
*download the MSL reader app if you don't know your MSL number
I tried the fix and no change. I have already cleared out my profile more than once with no change. I'm consistently getting 0.1/0.4 now.
Edit : Just flashed to an entirely different set of radios, PRLs, and so on. Now I'm consistently 1000ms/0.3/0.3.
Spent an hour or two on the phone with Sprint last night. Most likely going all the way back to stock everything, doing one last test, and then dropping it off at their store. Nothing we tried did anything at all. Nothing I have tried has done anything at all. Out of ideas.
If someone has any last advice, let me know. I'd sure be happy if I could get this damnable thing working without going through the unroot process and such.
Have you tried the new radio? Its version 2.15.00.04.08. A lot of people have gotten faster 3g including myself.
dglowe343 said:
Have you tried the new radio? Its version 2.15.00.04.08. A lot of people have gotten faster 3g including myself.
Click to expand...
Click to collapse
Tried it.
I have recently flashed my Evo to Boost mobile using my seek as the donor. Now I know seek gets 3g speeds and have figured out the HA/AAA secret and have written it. Now the 3g icon pops up for about 5 minutes every couple of hours and then goes away. It is running either 1x or nothing at all. I had to remove the RC2-GodMode rom and replaced it with gingerbread 2.3.3, sense 2.1 deodexed. Is there anyone out there that can give me an idea why I may not be getting 3g locked in? And if so can you tell me how to fix it? Thanks everyone and happy flashing.
I would be very interested myself. My donor is a Rant. My data connection comes and goes, but mostly sticks. I'm only getting around 130 kbps DL. I've done everything exactly as instructed and think its just the donor phone. The Incognito is supposed to work very well.
The one thing that confuses me is that my profile and prl will not update in the settings > update section. Everytime I try, I get the error 67 message.
Sent using Tapatalk
Great news! I just redid my entire flash today line by line based on this guide posted in post #1 http://forum.xda-developers.com/showthread.php?t=1182260 . I skipped over the sections for repairing the meid (since I've already done this), but completed the rest exactly. I also used the profile info from the instructions(pictures) and just changed over my NAI, HA, AAA passwords.
Rebooted and 3G is working now! no stalling or dropping and my speeds have gone from around 130kbps DL to 500kpbs. It's still not the best speeds but much better. I was also able to update the profile and prl in the settings > update section.
Let me first start by saying I am testing another Evo 4g as well as an Evo 3D at the same time next to each other. My phone gets around .3 everytime while the other phones receive .6-1.8 on avg. The Evo 3D is stock, unrooted and the other Evo 4G is running CM7 currently.
I was originally on CM7, then I tried 3G turbocharger script. Then I moved to MikG (currently running 3.1) and additionally tried ##3282# method, but it was already at all 0's when I first launched it on MikG.
I am looking to find out if anyone knows a specific area that I may have messed something up or some other way to fix this issue. It isn't fixed by AOSP/Sense, and the 3G turbocharger/##3282# method is not affecting my speeds.
Thanks in advance if anyone has any help to this. All I seem to find time and time again is the ##3282# method when I search, but my phone has had that as the default setting all along...
Welcome to Sprint, where unlimited 3g means you get dial-up speeds from 1998.
Does it say 1x or 3g?
i have had that problem before with the evo 4g it happens sometimes because sprint updates there PRL and Profile updates to connect too cell towers and with a lot of custom roms you cant update these things like on the official firmware.This causes loss of service in some areas and in some cases no service at all.
I live in a 4g area but when I get to a spot that it coverts to 3g I hate life....slow is a kind work for the speeds.....suck would be more appropriate
Yes, but like I was saying, the speeds on the phones next to me running custom CM7 and unrooted are both pulling in similar DL speeds that usually more than quadruple mine. I just can't figure out how to match theirs... I want to know what is different btwn our phones and where to find that information.
The only 2 options I see are trying to install the sprint based ROM and if that doesn't work, unroot my phone, try that, and next step would be to get them to trade it in...
I just hope there is a way I can change settings; it would save tons of time and effort.
Ok what is your current Dl speed? on the evo?
with that info i can probably find more ways to help you.
it ranges from .1-.4mbps on average. The other phones in the area achieve .6-1.8 or so... I spend a lot of time in the .27 range -sigh-
I am getting the new Ford Focus in a couple of weeks and I want to stream media to it while I drive, sooooo I would really like this resolved b4 my car arrives.
In that case i would reccomend,
flashing the evo back to stock sprint firmware and when you get done go to system update and update PRL and the Profile if that doesn't help let me know and we can try other options and if it does work you can put your custom firmware back on if you chose.
Updating the PRL and Profile in MikG doesn't work even though it looks the same and says it updated?
i actually just flashed a new rom today
it was the mikg kinged shooter 3d rom i was having problems myself so the best bet would go to stock because some features in mikg rom might not install those updates properly .
I will post back the results tonight or tomorrow when I get time. Thank you.
any time.
any questions feel free to ask
Last night i installed http://forum.xda-developers.com/showthread.php?t=1319881 and did the prl update and profile update. I nandroided back to MikG, and I don't think it helped. I will only know for sure on monday when I can test the other sprint phones next to mine.
At this point it is probably the hardware, right?
All right I have a few question I figured I'd ask in one thread they pertain to one another I guess.
1. (blazer rom 4.0) So last night I flashed this rom because i have not given GB a chance everything went well flashed fine......but when I booted the phone everything came up but I had no service. not a empty signal display it had the circle with the slash through it no service. under about phone it said I had no number, no prl, no nothing. after doing a shutdown and restart service would come on periodically and the it would go back to what I had just mentioned.
2. (prl and profile update) so the whole reason I flashed I flashed back was to update my prl and profile. but for some reason I can not do either. for this one i just flashed back stock el29. It would say and show that I had a 3g signal but everytime I the instant I would hit update the signal would vanish and 5 seconds later i would get (error: no connection) thried this with 3g,4g,wifi no luck.
this also happen when I was talking to a sprint rep setting my epic up, it took an hour and half to get my phone updated, no bueno.
do we have prl zips for are phone? and where, if so?
and any help with the blazer rom would be great. From the little bit I messed with it, it was a very smooth and snappy rom.
gilbydakid said:
All right I have a few question I figured I'd ask in one thread they pertain to one another I guess.
1. (blazer rom 4.0) So last night I flashed this rom because i have not given GB a chance everything went well flashed fine......but when I booted the phone everything came up but I had no service. not a empty signal display it had the circle with the slash through it no service. under about phone it said I had no number, no prl, no nothing. after doing a shutdown and restart service would come on periodically and the it would go back to what I had just mentioned.
2. (prl and profile update) so the whole reason I flashed I flashed back was to update my prl and profile. but for some reason I can not do either. for this one i just flashed back stock el29. It would say and show that I had a 3g signal but everytime I the instant I would hit update the signal would vanish and 5 seconds later i would get (error: no connection) thried this with 3g,4g,wifi no luck.
this also happen when I was talking to a sprint rep setting my epic up, it took an hour and half to get my phone updated, no bueno.
do we have prl zips for are phone? and where, if so?
and any help with the blazer rom would be great. From the little bit I messed with it, it was a very smooth and snappy rom.
Click to expand...
Click to collapse
There are no prl zips that IM AWARE of. I'm pretty sure there are none! Idk try to see if sprint repair can find something wrong with it! Or you can try to flash a different modem. Sorry about your issues
~Blu Kuban~ "My EDiTiON"
also if I helped you in anyway, Lets have some manners and hit the thanks!
The blazer service issues are logged in the op forum.