Note: Posting this on behalf of ytt3r. I will be maintaining this thread on Team Talon's behalf.
Happy hump day! This is TalonMTD, for CM7 and MIUI (and potentially other MTD based ROMs). This kernel has nearly all of the features of TalonDEV--and more coming sooner than later. Lets get straight into it!
Code:
Features
[LIST]
[*]Overclock up to 1440MHz/Undervolt for all frequencies (having only 5 frequencies undervolted seems most stable)
[*]Nexus S Framebuffer
[*]Voodoo Color v2 (No yellow tint!)
[*]Voodoo Sound v10
[*]Based on Linux kernel 2.6.35.13
[*]GPU overclock
[*]GPU Tweaks
[*]Bonus Governors: InteractiveX, Smartass, Conservative governor compiled as a module (not enableable yet)
[*]Bonus Schedulers: SIO, V(R), BFQ2r1, CFQ with tweaks
[*]Undervolted ADC and RAM
[*]Disabled Userspace governor
[*]Kangsterizer’s LED notifications
[*]Asynchronous I/O support
[*]Logcat compiled as a module, must be enabled via ‘logcat-on’
[*]Lowmemorykiller tweaks by kodos96
[*]Jhash3
[*]RAM tweaks
[*]Readahead tweaks
[*]Kernel HZ set at 250
[*]Disabled kernel printk for less overhead
[*]KTLO (Keep the Lights On)
[*]Samsung ARM fix
[*]16.25 lbs. of ext4 fixes
[/LIST]
Code:
#include <std/disclaimer.h>
/*
* While this build is heavily optimized, it is also capable of pushing your Captivate
* much harder. I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or the current economic crisis. Please do some
* research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modificiations, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
You can download it here...
0.0.3: http://dl.dropbox.com/u/9426310/TalonGalaxyS-0.0.3.zip
Source code: http://existz.darkirc.info/git/?p=kernel/talonmtd.git
Join us on freenode, channel #suckerpunch for support.
Many thanks to my co-devs eXistZ, kodos96, and zacharias.maladroit/zachy_md. (original Talon thread here: http://forum.xda-developers.com/showthread.php?t=1050206)
Huge thanks to
Supercurio
Teamhacksung
morfic
netarchy
TheEscapist
TK-Glitch
kangsterizer
And a great big final thanks to my testers, the great folks who put up with me breaking stuff and putting up a new build every 5 minutes, the guys who pushed me to greater heights to get stuff done:
Shoman94
Vivified (the great motivator)
Thegodsquirrel
Abee_13
lownox
Wanna say thanks? Buy me a root beer, and/or hit thanks!
Addendum: This is relatively untested on the i9000 as the main testing was done in Captivate.
0.0.3 (Maintenance Upgrade)
TONS AND TONS of ext4 fixes (more info here: http://existz.darkirc.info/git/?p=kernel/talonmtd.git;a=shortlog)
Minor upstream fixes including call volume tweak
0.0.2
Improved USB signal quality
OndemandX governor (offers sleep power consumption improvements over ondemand, not ready for the big time yet. Seems to cause 3D choppiness.)
Fixed enable_conservative script (released separately, coming soon)
Upstream DVFS fixes
Many more ARM fixes (for more information visit http://existz.darkirc.info/git/?p=kernel/talonmtd.git;a=shortlog and take a look at the ARM fixes)
Low power mode support (buggy)
Upstream touchkey tweak to prevent accidental button pushing
BUMPED OVERCLOCK VOLTAGES--People were reporting serious instability, so I bumped the voltages. This should fix the majority of issues.
init.d cleaning script from zacharias.maladroit
Major tweaks from Infuse to help with CPU scaling above 1000 MHz
Im usually all about constructive comments... but..
I love you.
That is all.
hi, i'm new to miui rom, after flash this kernel...if not suitable, how to flash back to ori kernel?
minjiet said:
hi, i'm new to miui rom, after flash this kernel...if not suitable, how to flash back to ori kernel?
Click to expand...
Click to collapse
You mean the original kernel that comes with MIUI? You can flash the CWM zip for the kernel itself. If the CWM zip is not available, you only have the full CWM ROM zip, you could:
1. Remove all instances of system files in the zip and only keep the kernel (in the updates dir) and the META-INF
2. Edit the updater-script in the META-INF and only leave the kernel copying procedure
3. Run the CWM zip in recovery mode.
This is what I usually do in Samsung based ROMs. It might be a little different for MIUI/CM7, or you could flash any other CM7/MIUI kernels using their CWM flasheable zips.
Let me know if you're unsure of what you need to do and I'll offer you support in the IRC instead.
totally clueless....please guide me step by step.
thanks
minjiet said:
totally clueless....please guide me step by step.
thanks
Click to expand...
Click to collapse
Come to the IRC. I'll guide you step by step
Edit: http://webchat.freenode.net #suckerpunch
fuyooohhhh, new kernel for cm7! :clap:
Im on MUIU and lost recovery trying to flash the above kernel with rom manager. Is there a way i can odin a muiu kernal? the phone boots to muiu but cant access recovery...
illusion786 said:
Im on MUIU and lost recovery trying to flash the above kernel with rom manager. Is there a way i can odin a muiu kernal? the phone boots to muiu but cant access recovery...
Click to expand...
Click to collapse
Try using Heimdall to flash the boot.img of another custom kernel.
heimdall flash --kernel /path/to/boot.img
thanks for the reply, it did flash but i didnt get cwm recovery to load. it just shows the triangle.
illusion786 said:
thanks for the reply, it did flash but i didnt get cwm recovery to load. it just shows the triangle.
Click to expand...
Click to collapse
Not sure what triangle you're mentioning there. Can you post up a screenshot?
If you've successfully flashed the boot.img using Heimdall in download mode, can you boot the phone?
i can boot the phone, thats not a problem... I cant get access to recovery.
when i try to boot to recovery i get a triangle and a file next to it.
dont worry about it, ill just full flash it again.
so far not very good - instant freeze after boot and than it restarts itself.
Also uses old recovery - absolutely not a big deal, just something that catches eyes and fingers.
Sent from my GT-I9000 using xda premium
illusion786 said:
i can boot the phone, thats not a problem... I cant get access to recovery.
when i try to boot to recovery i get a triangle and a file next to it.
dont worry about it, ill just full flash it again.
Click to expand...
Click to collapse
That's download mode.
Sent from my GT-I9000 using xda premium
dupel said:
so far not very good - instant freeze after boot and than it restarts itself.
Also uses old recovery - absolutely not a big deal, just something that catches eyes and fingers.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Did you clear oc/uv settings? Voltages might be a little different than other kernels.
Sent from my Inspire 4G using XDA app
existz said:
Did you clear oc/uv settings? Voltages might be a little different than other kernels.
Sent from my Inspire 4G using XDA app
Click to expand...
Click to collapse
Didnt do it manually, assumed script would do it (glitch and platypus do). Will try out again later when I get back home. If it didnt clean scripts, there could be a lot left from platypus I guess.
Sent from my GT-I9000 using xda premium
wow thanks !!!
I was just wishing for days for this to happen !!!
please, can you implement ZRam and Memory Freak app for CM7 ?
heheh Talon Dev when on Samsung Roms and Talon MTD when on CM7 / MIUI
( yes , i am constantly rotating between those, i currently love MilkyMod and CM7. Latest Miui is also very nice )
this rom is awesome , i get about 190 - 196 free ram everytime i use the app killer(the inbuilt one in miui) , im on galnet chameleon rc2 , its super smooth , only bug i found till now is that the overclock is very very unstable , it freezes even at 1.2 ghz , previously i could go upto 1.4 stable and 1.5 for benchmarks
It's really great to see the TalonDev team on CM7.
I'm loving your kernel on my stock rom
And now on CM7... OHH MY GOD HOW CAN I CHOOSE BETWEEN ZACK AND TALON KERNEL
Related
First is an O/C kernel that I built from the HTC source. This kernel is stable and with the right profiles setup in setCPU has given me very good battery life. I'm giving coolbho3000 credit here as his post in the G2 forums is what helped me to do this. I am also acknowledging gr8gorilla who helped me several times through this process. Second is a kernel built from the latest CM kernel zource from zinx. It has proven to be very stable (after tweaking the voltages).
Now for the boring part ... If you choose to flash this you do it at your own risk. I am in no way, shape, or form responsible if you flash this and your phone turns into a paperweight. Once again, flash this at your own risk.
There, now that that is out of the way we can get on to the good stuff.
Make sure you choose the right kernel. The stock kernel will break your CM install if you flash it.
Kernels for Stock and Stock based roms
Kernel 2.6.32.21grankin010OC0v0.05
http://t1mgmaps.com/file.php?id=24
Md5Sum: 72c3430177eeefc6ff4b2c658efa0949
Features:
adb root enabled by default
system set r/w at boot (no need to remount)
voltages tweaked
cacheflush hack from zodttd integrated
noatime for better FS performance
Kernel 2.6.32.21grankin01-OC-v0.04
http://t1mgmaps.com/file.php?id=20
Md5Sum: a8668bdb2c1c7ca6ef0d9fbdafbe6969
Features(+v0.03):
Same features as v03 but with different voltages
Kernel 2.6.32.21grankin-OC-v0.03
http://t1mgmaps.com/file.php?id=19
Md5Sum: a82111399a9a4d570def14dce563a073
Features(+v0.01):
Voltages tweaked - Hopefully this one is more stable for you guys.
Kernel 2.6.32.21grankin01-OC-v0.02
http://www.mediafire.com/?o216o3b6jea13f9
Md5Sum: 2fdcde29532339743f0c41daae32db7f
Features(+v0.01):
O/C'd to 1.8Ghz with several intermediate clock speeds
Voltages for 1.7Ghz have been turned up a little bit to address stability concerns
Kernel 2.6.32.21grankin01-OC-v0.01
http://www.mediafire.com/?bqbdgb38m15n789
Md5Sum: af73907d0f9d8fbc1b5dcc41ea6b9552
Features:
Ext4 support (if you want to play with it)
O/C'd to 1.7Ghz with several intermediate clock speeds
ADB has root privileges automatically
System is set R/W on boot (no need to mount anymore)
HTC Perflock is disabled (pre-requisite for over-clocking)
CPU Governors:
Performance
Conservative
OnDemand
UserSpace
PowerSave
Kernels for CyanogenMod and MIUI
Do not use these with CM7-GB. They will not boot properly.
Kernel_grankin01-CM-OC-v0.10
http://t1mgmaps.com/file.php?id=26
Md5Sum: 6c4f5b18ca5509cc83cf5eac0667b3e0
Features:
Same as v09 but video works
Kernel_grankin01-CM-OC-v0.09
http://t1mgmaps.com/file.php?id=25
Md5Sum: 63bcc734bf33cb30eb0dd335f807bf10
Features(+v0.08):
Wifi is fixed in this release
Kernel 2.6.32.27grankin01-CM-OC-v0.08
http://www.mediafire.com/?4hs3ix1b8rdmz36
Md5Sum: 7822eb4dcf547d712c455c72c83d4118
Features:
Noatime for better FS performance
Cacheflush hack by zodttd is integrated
Voltages have been tweaked (again )
Inludes all the standard features also
Kernel 2.6.32.27grankin01-CM-OC-v0.07
http://t1mgmaps.com/file.php?id=18
Md5Sum: 9273d9405e6bdb76f754c96916e36262
Features(+0.06):
System Permanent R/W Fix (edited code in v06 and left that out ... oops)
Video is fixed
Voltages changed (hopefully for better battery life)
Kernel 2.6.32.27grankin01-CM-OC-v0.06
http://t1mgmaps.com/file.php?id=17
Md5Sum: 55f04250126b6763db2f180b2829e4ac
Features(+0.05):
Newest Bluetooth fixes
Newest Video fixes - broken/missing code
System Permanent R/W - Broken (edited code and left that out ... oops)
Kernel 2.6.32.27grankin01-CM-OC-v0.05
http://t1mgmaps.com/file.php?id=16
Md5Sum: 026e5717311fa42da073ac8a9fc442d5
Features(+0.03):
Bluetooth fix
Charge issue fix
Kernel 2.6.32.27grankin01-CM-OC-v0.03
http://www.mediafire.com/?3g6yv8g9ypsu953
Md5Sum: 0424f5565387f86818c1e67ff636443e
Features(+v0.02):
New version of kernel includes fix for video
Kernel 2.6.32.27grankin01-CM-OC-v0.02
http://www.mediafire.com/?jsux5wtj7mgcvzo
Md5Sum: 8c243df7f53143a6a3be5292073f052b
Features:
Ext4 support (if you want to play with it)
O/C'd to 1.8Ghz with several intermediate clock speeds
ADB has root privileges automatically
System is set R/W on boot (no need to mount anymore)FIXED
HTC Perflock is disabled (pre-requisite for over-clocking)
CPU Governors:
Performance
Conservative
OnDemand
UserSpace
PowerSave
Interactive
CM7-Gingerbread Kernels
Do not use these with CM6-Froyo! They have different ramdisks and wifi options built in.
These kernels have no issue with video. If you are having trouble with youtube and such update your GB rom to one of the newest. There was a memory leak in the source for the rom itself that zinx has fixed. Thirty to Forty-Five minutes of straight youtube action and I had no problem at all.
Kernel_2.6.32.27grankin01-CM-GB-OC-v0.09
http://t1mgmaps.com/file.php?id=29
Md5Sum: 7565340ac31ff7560d45ab42e043acc0
Features(+v0.08):
Changed voltages a tad
I get great battery life with light to moderate usage on this kernel
Kernel 2.6.32.27grankin01-CM-OC-v0.08-GB
http://t1mgmaps.com/file.php?id=22
Md5Sum: b7b5fde8db99a01d827c3b7fc81a387e
Features:
Noatime for better FS performance
Cacheflush hack by zodttd is integrated
Ext4 support (if you want to play with it)
O/C'd to 1.8Ghz with several intermediate clock speeds
ADB has root privileges automatically
System is set R/W on boot (no need to mount anymore)
HTC Perflock is disabled (pre-requisite for over-clocking)
CPU Governors:
Performance
Conservative
OnDemand
UserSpace
PowerSave
Interactive
I have packaged this into an update.zip format that you can flash through your custom recovery. Simply choose to install a zip from the sdcard and pick the update package to install it. It will install the wifi driver at the same time so you don't need to worry about that. Everything works with this kernel so far for me if you have any problems please post them and I'll see what I can do to fix them.
Remember that you hardware is not the same as your neighbor's so while he may be able to max the settings out and run stable your device may need to be set to a lower clock speed to run stable.
Source code for both kernels has been added to github. If you want to play around with them download source from here: https://github.com/grankin01
Happy Modding/Devving!
wow, thank you sir
I was just about to start testing kernels with Zinx's CM6 anyway. Looks like yours is first.
hmmm... could not run update.zip through clockworkmod. I was looking to extract the files and push them manually, however, I don't see a zImage file to push.
No luck with the miui rom. Cant get past the splash screen.
Sent from my HTC Glacier using XDA App
monnietron said:
No luck with the miui rom. Cant get past the splash screen.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Yeah, its based off of CM. I'm working on one built fromthe CM source right now.
Christopher3712 said:
I was just about to start testing kernels with Zinx's CM6 anyway. Looks like yours is first.
hmmm... could not run update.zip through clockworkmod. I was looking to extract the files and push them manually, however, I don't see a zImage file to push.
Click to expand...
Click to collapse
There isn't a zimage. I wrapped it all up in its own boot.img and then packaged it in the update.zip with the wifi module.
Does this break the nightly CM ROM? I know gorilla's kernel does.
I appreciate your work!
TmobileDash12 said:
Does this break the nightly CM ROM? I know gorilla's kernel does.
I appreciate your work!
Click to expand...
Click to collapse
Yes, it breaks it horribly. I'm working on it now.
grankin01 said:
Here is an O/C kernel that I built from the HTC source. This kernel is stable and with the right profiles setup in setCPU has given me very good battery life. I'm giving coolbho3000 credit here as his post in the G2 forums is what helped me to do this. I am also acknowledging gr8gorilla who helped me several times through this process.
Click to expand...
Click to collapse
Thanks for this grankin01. Great work to you and the others involved.
So no miui or cm6 on this kernel correct I just dont wanna break anything.
Sent from my icey cold glacier 4g freezing every phone in its path.
jriv said:
So no miui or cm6 on this kernel correct I just dont wanna break anything.
Sent from my icey cold glacier 4g freezing every phone in its path.
Click to expand...
Click to collapse
Not yet. It will work with the rom that you have installed right now though.
hey guys. im a noob to android. every other phone i have had has been winmo. i wanted to try this oc kernel because it seems easier to install than the gorilla one. however i ran into a problem when installing. i have a stock rom 2.2.1, perm rooted s=off, using clockwork recovery. i backed up my rom and flashed via rom manager. it then began to send me into a boot loop never getting past the first screen. just kept turning off and rebooting. soooooo i rebooted directly into clockwork and tried to do it from there and the same thing happened. so i restored my recovery and now everything is back to normal. can anyone point me in the right direction? i did notice that in clockwork it gave me two options to flash the kernel or to flash an update from the sd card. should i have flashed the update zip instead of the kernel or flash both.. sorry im a partial noob. i know how to use adb a lil and the emulator, this is the first thing i flashed on my phone and nearly had a heart attack from thinking i was bricked! any help is appreciated
Do you already have setCPU installed? Not everyone's phone will be able to reach the maximum speed without bootlooping or locking up. Just the nature of the beast. Try setting your speed down in setCPU (if you already have it installed) and turn set at boot off and then flashing and rebooting. Then you can test the speeds one by one to know what is working for you.
Edit: New kernel for CM and MIUI is nearly ready. 1.8Ghz with over 3200 on quadrant!!!
grankin01 said:
Not yet. It will work with the rom that you have installed right now though.
Click to expand...
Click to collapse
Oh I'm running miui now just haven't changed my sig lol
Sent from my icey cold glacier 4g freezing every phone in its path.
Can't wait for your kernel for CM! I wanna see my phone unleash its true power! Lol thanks dude.
Sent from my HTC Glacier using XDA App
grankin01 said:
Do you already have setCPU installed? Not everyone's phone will be able to reach the maximum speed without bootlooping or locking up. Just the nature of the beast. Try setting your speed down in setCPU (if you already have it installed) and turn set at boot off and then flashing and rebooting. Then you can test the speeds one by one to know what is working for you.
Edit: New kernel for CM and MIUI is nearly ready. 1.8Ghz with over 3200 on quadrant!!!
Click to expand...
Click to collapse
thanks.... stupid me... duuhhh.... i have setcpu installed already and it is set at "set on boot".... thanks for the help man... will give it a go and let you know how that works out!
Edit: turning off set on boot in setcpu didnt work. still boot looped. i will try uninstalling setcpu, then flashing, then reinstalling. i dont get it though because my highest on setcpu is the stock 1024.... hmm maybe its the profiles i have set up... either way, gonna give it another go in a few. im gonna get this working today if its the last thing i do. so thankful for backups to restore lol
grankin01 said:
Do you already have setCPU installed? Not everyone's phone will be able to reach the maximum speed without bootlooping or locking up. Just the nature of the beast. Try setting your speed down in setCPU (if you already have it installed) and turn set at boot off and then flashing and rebooting. Then you can test the speeds one by one to know what is working for you.
Edit: New kernel for CM and MIUI is nearly ready. 1.8Ghz with over 3200 on quadrant!!!
Click to expand...
Click to collapse
That's...retarded. I can't wait to see how that handles. lol! Are you incorporating U/V's on the lower frequencies as well?
UV / OC?
Is this a UV / OC kernel? Thanks for the help.
Christopher3712 said:
That's...retarded. I can't wait to see how that handles. lol! Are you incorporating U/V's on the lower frequencies as well?
Click to expand...
Click to collapse
Yes, and O/V's in the higher frequecies for stability. This one was picky.
InvisibleHero said:
Is this a UV / OC kernel? Thanks for the help.
Click to expand...
Click to collapse
Only in the lower frequencies. The higher frequencies weren't stable running lower voltages.
Thanks OP. When you say the lower ranges, at which MHz did you not UV? Just curious. I am thinking of not OC'ing more than 1.4MHz and didnt know if I would get the UV benefit.
*EDIT* Meant GHz
Presenting, my HD2 NAND Android kernel!
Summary
To provide, stable, fast and up to date kernels for our HD2s running either DFT or CWM nand android
Features
- 1190, 1190 Undervolt auto scaling versions available. listed is kernel MAX speed, it will scale to anything less depending on demand and ROM installed. Default max seepd is 998 without the use of an overclocking app
- Faster IO tweak taken from hastarins kernel tree
- Latest YAFFS driver
- Always built from latest source tree
- Very responsive kernel configuration
- Battery efficient
- Supports EXT 2 / 3 / 4, depending our your chosen ROM
- RMNET / PPP both supported, depending on your chosen ROM
- Bluetooth, WiFi, LED notifications all working correctly
- Smartass (default), Interactive and all standard CPU governors supported
- CIFS supported
- MAX defualt speed is 998, use setCPU or similar to overclock if you so wish
- cLK supported
- Automatic Extended Battery Support
Choosing your kernel
1190Mhz
This should work perfectly on nearly every HD2. It offers good speed at a slight cost to battery life. It will, depending on how your chosen ROM implements it, scale anywhere between 245-1190 Mhz depending on load
1190Mhz Undervolt
Same performance as 1190Mhz above, but with lower CPU voltage settings. It will work perfectly on most phones, but not all. If you experience FCs or random reboots then chose one of the aforementioned versions. This kernel offers significant battery life improvements if it works for you.
About the source and GPL compliance
The kernel is built direct from main GIT. You can access the commit logs and sources here on gitorious
The changes and modifications as mentioned in the changelog, and my build .config are all in my separate patch file, which you can download here
Download
All the kernels are supplied on one zip package. Contained within the package are the 2 kernel zImages and the associated modules. Chefs and advanced users will know what to do with these.
Download v11 (files only) --> http://htcfanboys.com/CleanEx/Kernel/DISTRIBUTION KERNELv11.zip
Download CWM ZIPs FOR NON TYPHOON ROMS (*series A*)
http://forum.xda-developers.com/showpost.php?p=11968195&postcount=408
Download CWM ZIPs FOR TYPHOON ROMS / ROMS SHIPPED WITH TYTUNG v6 (*series B*)
these include the wpa_supplicant fix for Wifi / bootlooping
http://forum.xda-developers.com/showpost.php?p=11974837&postcount=471
(the RAM named ones are for typhoon ram build)
Flash under cwm.
Wipe Cache and Dalvik Cache.
~~~~IMPORTANT~~~~
If you are not sure you need the WiFi patch, flash the *series A* kernel. If you find your phone bootlooping / wifi crashing, flash the *series B* kernels
As a backup, the wifi patch remains attached to this post
Changelogs
v11
- Pulled new updates from GIT
- Automatic Extended Battery support
- cLK patches and support built in
- some cleanups
- config changes, more responsive (quadrant wont improve thats IO bound)
v10
- Bug fixes, WiFi should work for everyone without the patch
- Imported the i2c, gsensor, GPU decoupling driver patches to new build tree
- Removed all debugging from kernel (99.9% people dont need it)
- Some build config changes, little more responsive
v9
- Fixed WiFi driver for non GB builds
- Fixed default CPU speed @ 998 max
- Fixed crashes / bootloops / random reboots
v8
- Switch to main branch, import speed mods from previous version
- Fix WiFi for GB / non-GB builds
- config changes for better response times
v7
- Switched to tytungs branch
- Swapped tytungs GB only WiFi driver for main one from primary GIT
- Added CIFS support
- Removed 998 / 1536 speeds
- 1190 Normal is not undervolted and will work for everyone
- 1190 uv is undervolted and might not work for everyone
- Reverted to SLAB, should fix bootlooping
- Other minor config changes
v6
-First public release
Disclaimer
I am not responsible for any damage, loss of data or earnings resulting from the use of my kernels. Users who wish to use an overclock kernel do so on the understanding that running any device outside its normal operating parameters may have damaging consequences
Credits:
Cotulla, Bepe, Hastarin, Tytung, Rafpigna, Markinus and all other kernel source contributors as mentioned on the GIT Commit logs.
Fadzy, JoPlayer, Dave and Jan-Willem for their never ending support, friendship, help and good laughs.
First! This is in a kleandroid 2.55?
yes....and no
its just been recompiled, and i added pure 998mhz for people who have phones that cant take the faster speeds!
Awesome! This is the best kernel, have been using it for like three days and it gives me the best battery life and performance. I loved it. I'll pack this one into cwm zip when I get home and flash it.
Edit: how much does battery life actually improve with the uv one? Now I'm torn between the uv and oc to 1.5ghz. Battery or performance?
Sent from my HD2 running Android on NAND
Can anyone test this on sergio's coredroid 1.4 and post results? I would but dont have my computer for a couple days.
g.lewarne
Please add 998Mhz kernel to next update CleanDroid!
Derek0228 said:
Awesome! This is the best kernel, have been using it for like three days and it gives me the best battery life and performance. I loved it. I'll pack this one into cwm zip when I get home and flash it.
Edit: how much does battery life actually improve with the uv one? Now I'm torn between the uv and oc to 1.5ghz. Battery or performance?
Sent from my HD2 running Android on NAND
Click to expand...
Click to collapse
you might get maybe possible 15% more battery time out of the UV kernel. in ideal circumstances in a perfect world of course
CWM
How to use that? :-(
Any zip to use on cwr?
felipemadox said:
How to use that? :-(
Any zip to use on cwr?
Click to expand...
Click to collapse
Not yet, it is still underway.
I made some cwm zips, before going to sleep. I wasn't able to test them because it's late, but they should work. If g.lewarne wants to post them in the OP, i have no problem. Inside the zip, after you download, there are 4 more zips, one for 998, 1190, 1536(this one doesn't work for me) and 1190 UV. Just flash the one you like and enjoy!
http://www.multiupload.com/DPR3F7TW7J
http://www.mediafire.com/?sqg55hze9evgchb
If you find this useful donate me a click on my thanks button.
Thanks derek.
g.lewarne said:
Thanks derek.
Click to expand...
Click to collapse
Once tested, please update, i will test a rom on it.
raviluke said:
Once tested, please update, i will test a rom on it.
Click to expand...
Click to collapse
I can't test anything now as im off to bed . Its 2am and I did a 14 hour day. Yawn!
report
Derek0228 said:
I made some cwm zips, before going to sleep. I wasn't able to test them because it's late, but they should work. If g.lewarne wants to post them in the OP, i have no problem. Inside the zip, after you download, there are 4 more zips, one for 998, 1190, 1536 and 1190 UV. Just flash the one you like and enjoy!
Please give feedback, again I say, they should work but haven't tested them. I've made all his previous kernel versions cwm zip, and flashed them successfully.
http://www.multiupload.com/DPR3F7TW7J
http://www.mediafire.com/?sqg55hze9evgchb
Click to expand...
Click to collapse
Thank you!
1190Mhz Undervolt its working here.
1536 does not work for ne! Causes random reboot on boot. If you want to test it, do so, but i'm pretty sure it's a problem with the kernel, not with the zip, because the one g.lewarne uses on his rom had 1536 and caused random reboots too, cant be a coincidence . Also, youre welcome!
I flashed the 1190 to test, now off to flash the UV one!
Sent from my HD2 running Android on NAND
raviluke said:
Once tested, please update, i will test a rom on it.
Click to expand...
Click to collapse
It works, but not the 1536 one, or at least not for me.
Sent from my HD2 running Android on NAND
Might I just point out that in real world situations the 1190 kernels are just as fast. 1536 is really just a gimmick but some people want it so there you to. Myself, I run my own personal 1305
Sorry for spamming this thread, but I must ask, is uv dangerous? If so, what are some steps I have to follow to prevent my phone from getting fu'd? Like for example,i know that for the 1536, we shouldn't have it always o/c'd to the 1.5ghz.
Sent from my HD2 running Android on NAND
Derek0228 said:
Sorry for spamming this thread, but I must ask, is uv dangerous? If so, what are some steps I have to follow to prevent my phone from getting fu'd? Like for example,i know that for the 1536, we shouldn't have it always o/c'd to the 1.5ghz.
Sent from my HD2 running Android on NAND
Click to expand...
Click to collapse
Uv Isn't dangerous in the same way, the only problem is possible crash, cpu is safe
Derek0228 said:
I made some cwm zips, before going to sleep. I wasn't able to test them because it's late, but they should work. If g.lewarne wants to post them in the OP, i have no problem. Inside the zip, after you download, there are 4 more zips, one for 998, 1190, 1536(this one doesn't work for me) and 1190 UV. Just flash the one you like and enjoy!
http://www.multiupload.com/DPR3F7TW7J
http://www.mediafire.com/?sqg55hze9evgchb
If you find this useful donate me a click on my thanks button.
Click to expand...
Click to collapse
Installed the UV Kernel on Coredroid v1.4 TMOUS ver its getting stuck at GO GO GO
OK, first off, this kernel is SUPER alpha! And I mean, SUPER ALPHA! If you're not experiencing crashes every once in a while, #yourdoinitwrong. Now to the good stuff.
Join us on freenode: #suckerpunch
Huge special thanks to Xcaliburinhand and eXistZ (current co-dev), without them, this kernel wouldn't eXistZ.
Talon Kernel build 0.1.4:
Chainfire's initramfs
CWM 3.0.0.5
Reorient by Xcal
Jhash3
Voodoo Color Fix
Voodoo Sound v8
Wired Headset Support
Audio Dock Support
Battery Polling set to 60s
Set Light Sensor Polling to 1s
SIO Scheduler
Interactive Governor
OC/UV support up to 1.2ghz
Stochastic Fair Blue (SFB) network scheduler
Disabled Android Logger (Logcat) // Not sure how this is a feature, but I'll look into it.
Few Upstream Fixes
CONFIG_HZ=100
341 MB of RAM! ZOMG
More OC/UV levels coming soon
And bam! That's it! You can get it here: http://dl.dropbox.com/u/9426310/Talon.zip
Development is moving very quickly. Expect your build to be obsoleted in an hour. Get your hourly here. (Completely untested. If something is wrong, let me know in the thread.)
And to everyone who downloads this: THIS IS NOT A BUG REPORTING THREAD. If you find a bug, put it on the github issue tracker here: https://github.com/existz/linux_gt-i9000-gb/issues
And you can grab the source code here:
https://github.com/existz/linux_gt-i9000-gb
Muchas Gracias to:
Supercurio
eXistZ
Xcaliburinhand
Chainfire (http://forum.xda-developers.com/showthread.php?t=788108)
designgears
Raspdeep
sztupy
Laststufo
Kodos96
Morfic
Anyone else I forgot
Messed up and saved unstable voltage control settings to boot? Erase them from CWM! advanced->wipe voltage settings
Original Captivate (not craptivate) thread: http://forum.xda-developers.com/showthread.php?t=1050206
You can track commits to the repo at http://twitter.com/#!/existz_dev. Have fun, click thanks, follow me on twitter, and heck, if you have a few extra bucks, I wouldn't mind if you pressed donate (the money is going toward a Nook Color to develop on)!
Bugs:
Tell me on github!
Voltage control settings might not stick on reboot. Updating busybox fixes this.
EXT4 support?
It has Chainfire's initramfs. The conversion has to be done via his app.
Nice>>>>>>
i has been waiting for OC on JVB rom
testing and report
tanks and keep the good work (i hope to see OC to 1.5Hz)
flash over SimpleHoney 3.1 final rom, the mounting of internal SD have problem, all app on sdcard show SD icon only, maybe need a fresh rom to flash it?
versa-desire said:
flash over SimpleHoney 3.1 final rom, the mounting of internal SD have problem, all app on sdcard show SD icon only, maybe need a fresh rom to flash it?
Click to expand...
Click to collapse
Try wiping cache and dalvik cache in CWM
froli13 said:
Try wiping cache and dalvik cache in CWM
Click to expand...
Click to collapse
yes, already wipe both, still the same, thanks for suggestion anyway
Sounds interesting.
Sent from my GT-I9000 using XDA App
finelly oc/ov kernel thanks for your effort man,can use Pimp My Cpu with it
I've been waiting for thissss!!! mucho gracias..! Obrigado! terima kasih!
*Craptivate? lol.. Is that on purpose?
/nik on XWJVA
Finally flash it from start with JVB-JV3-JVK CF Kernel, Talon Kernel, it work now, thanks!
Awesome.. We can't let the cm and miui guys have all the ocing fun!
Will keep an eye on this project. ;-)
Sent from my GT-I9000 using XDA Premium App
I found the answer of disappear of SDCARD app, it only occur when u convert the file system to EXT4, if in RFS that is no problem
Ah the talon kernel Ive been hearing so much about on ...
Rave reviews on the captivate
Will be watching the development of this
Hey glad to see this thread up! I'm sure my first test is obsolete already! Lol!
**Simply Honey 3.1, Talon i9000 test kernel OC/1.2Ghz, JVK modem**
versa-desire said:
flash over SimpleHoney 3.1 final rom, the mounting of internal SD have problem, all app on sdcard show SD icon only, maybe need a fresh rom to flash it?
Click to expand...
Click to collapse
Exact same problem here, so it IS rom related then...
**Simply Honey 3.1, Talon i9000 test kernel OC/1.2Ghz, JVK modem**
rlorange said:
Exact same problem here, so it IS rom related then...
**Simply Honey 3.1, Talon i9000 test kernel OC/1.2Ghz, JVK modem**
Click to expand...
Click to collapse
Same here. It has to do something with lagfix (as versa-desire already mentioned) most likely, because I'm running on stock and all my partitions have been converted to ext4. Haven't tried converting back to RFS.
well i don't have probleme fo this moment undervolting to
100mhz 100mv
200mhz 100mv
400mhz 75mv
800mhz 75mv
1000mhz 25mv
1200mhz 25mv
rlorange said:
Hey glad to see this thread up! I'm sure my first test is obsolete already! Lol!
**Simply Honey 3.1, Talon i9000 test kernel OC/1.2Ghz, JVK modem**
Click to expand...
Click to collapse
Must of been your rant in simply honey rom
Hey Everyone,
I'm by no means a pro at kernel building but I've put lots of effort into these kernels so I thought I'd share them with you. The Uber kernel will always be updated to the latest Kernel version and will be overclocked to 1890 MHz or 1998 GHz (2 GHz) you decide which option you are willing to do. Unlike some of the other T-mobile Galaxy S II Hercules developers out there, I actually have a Galaxy S II and plan on having it until Summer 2014. This means that EVERY KERNEL I POST HAS BEEN TESTED AND IS WORKING although it might not be perfect (few things in life ever are).
Even though I don't post anything unless it works I still don't want to be liable for user errors. In other words, if you flash one of these Kernels your warranty is void and I AM NOT RESPONSIBLE for any data loss or bricked devices etc. A Clean install is ALWAYS recommended. That does not necessarily mean you can't install these kernels on you current build it just means that you might have problems if you do. Recently apps have been getting corrupted for whatever reason whether on Stock or AOSP and in most cases they cause RRs and SODs. If you find yourself in one of those situations a clean install is the easiest fix. If you want to try and save you apps then connect to you phone while in recovery using adb. Then type adb shell. Now once you are in that shell you can run this command to fix your apps "e2fsck -yfDC0 /dev/block/mmcblk0p25" it could take anywhere from a few minutes to an hour depending on the state of your apps.
[AOSP 4.4.x UBER KERNEL LINK]
UBER 4.1 - 1.89 GHz RELEASE for AOSP 4.4 KitKat
UBER 4.1 - 2 GHz RELEASE for AOSP 4.4 KitKat
All old Kernels can be found on Dev Host via this link (be careful you read file names and descriptions carefully if you choose to take a peek around) http://d-h.st/users/Cl3Kener/
Installation Instructions
**** IMPORTANT!!! USE TWRP 2.6.1.0+ for 4.4 kernels!!! Failure to do so may result in bootloops due to changes made to TWRP to accommodate SELinux in 4.4 ROMs (Links include flashable TWRP installation zips credits to meekrawb. Just flash them in your current recovery! ) ****
1. For best results a install these kernel after a fresh ROM install (although it still should work if you don't do that)
2. Reboot into recovery (MAKE SURE YOU USE THE RIGHT ONE!!! (See red print above))
3. Flash Kernel Zip
4. Reboot and let Settle for ~10 minutes
5. Install Trickster MOD from the App Store for access to all of the options.
6. Change the settings to something other than INTERACTIVE (Especially if you run it with BFQ it will give you the worst screen lag ever). Then enable "Set at Boot" and push the check mark button at the top right hand portion of the screen or else you will lose your configurations.
7. Enjoy!!!
Error Reporting
I am always open to hearing about your errors although just telling me something went wrong without giving me details does me absolutely no good. So here are my expectations if you do want to complain about something not working:
1. Please list the ROM you are using,
2. The IO scheduler you were using
3. The CPU governor you were using
4. The CPU frequency range (192/1080 etc)
5. What you have done to attempt to fix it.
6. If you were able to simulate it again using the same settings.
7. Anything else you think is applicable to the issue
I would also hope that you would consider trying some of the following things to fix your issue before you ever report it because most of these things will fix the problem without me even having to change a thing.
1) Fix file permissions using a program that does a thorough job. I recommend using the fix file permissions in ROM manager because it is the best I’ve seen. For the record, I don’t actually use ROM manager for anything other than fixing permissions. Please consider trying this first because it tends to fix most of the FC/RR/SOD errors you might have.
2) Make a backup and install a clean version of the ROM you are running and see if you are still experiencing those same errors. You may have corrupted files if you’ve been dirty flashing.
3) If that doesn’t solve it, redownload and reflash, maybe something got corrupted but it still managed to flash. This happens sometimes and I can cause you grief.
4) For advanced users pull a logcat. I know not everyone knows how to do this but you can learn if you check out this OP or other ones like it
SPECIAL THANKS TO:
Android88 - because he is awesome and encouraged me to create this thread!
Samsung - for the source code to build these Kernel (and for making the phone)
Ayysir - for his wonderful tutorial on making a bash script to build kernels and for helping me out all of the time with everything!
Elbermu - For Bringing Thermal and Sweep2Wake to Hercules and for the help!
Bmg002 - For his extensive work fixing/rewriting my init.d scripts
Gruntparty - For completely redoing/fixing the build.prop injector I use for my AOSP Kernels
I Am The Frost - For being my first and best tester on xda. He's debugged several issues in these kernels for me
UBER Kernel Repositories can be found at https://github.com/Cl3Kener/HERC-KERNELS and are properly labeled for your convenience (see the branches)
Informational Links
Here is a fantastic guide on "Innards" of Kernels
Optimizing Linaro Keychains
Building a Bash Script to make Kernels
JOIN MY GOOGLE COMMUNITY IF YOU WANT INSTANT UPDATES ON ANY OF ANDROID STUFF I DO.
Reserved!
XDA:DevDB Information
[KERNEL][AOSP 4.4.x][2GHz/1.89 GHz] UBER 4.1 | LINARO 4.7.4, a Kernel for the T-Mobile Samsung Galaxy S II
Contributors
Cl3Kener
Kernel Special Features:
Version Information
Status: Beta
Created 2013-12-02
Last Updated 2014-01-30
Changelogs
Changelogs
Changelog UBER 4.1 Release
- ONLY FOR ANDROID 4.4.2 CM 12/16 Nightlies and beyond!!!!
- Kernel Version 3.0.101 - Linaro 4.7.4 2013.12
- USB fastcharge
- MORE TCP Options "Veno as default
- Fsync toggle - disable for better performance but beware that if your phone crashes you will lose data.
- Overclocked CPU 1890 or 2GHz/ GPU 3D = 320 2D = 266
- IO Schedulers - cfq, bfq, row, noop, deadline, sio, vr, FIFO, and zen
- CPU Governors - intellidemand, interactivex, lazy, wheatley, smartass, badass, lionheart, minmax, fantasy, savagedzen, scary, HYPER and samsung.
- Frandom Lag Reducer
- Smaller sized kernel due to xz compression.
- CPU link - elbermu
- Sweep2wake - thanks dennis rassmann (@show-p1984) for his awesome code and elbermu for modifying it to fit this device!
- Thermal - thanks once again to dennis rassmann (@show-p1984) for his awesome code and elbermu for modifying it to fit this device!
- IO Booster
- CPU Power - Vincent Guittot
- Frontswap Support
- Google "Snappy" compression/decompression
- KGSL GPU Control - carvsdriver
Additional Info
Terminal commands to enable/change a kernel features if you are don't like kernel tuning apps
Fsync
To enable - echo 1 > /sys/module/sync/parameters/fsync_enabled
To disable - echo 0 > /sys/module/sync/parameters/fsync_enabled
USB Fast Charge
To enable - echo 1 > /sys/kernel/fast_charge/force_fast_charge
To disable - echo 0 > /sys/kernel/fast_charge/force_fast_charge
Set Thermal Values
Go to /sys/kernel/msm_thermal/conf/ in a root file browser and change the values
Set MPDecision Values
Go to /sys/kernel/msm_mpdecision/conf/ in root file browser and change the values
Disable CPU Link
echo 0 > /sys/kernel/cpu_gov_sync/force_cpu_gov_sync
Recommended CPU Govs by Category
For Performance
Performance Governor - Full OC
HYPER - full oc
Lionheart - full oc
For good battery life with decent performance use
Intellidemand
Interactivex
Ondemand
Samsung
Lazy
Moderately Conservative
Badass
Conservative
Wheatley (debatable could be in the above category)
Very Conservative
Powersave
SavageZen
not sufficient info? checkout out this op
Sweet! New kernel!
Sent from my SGH-M919 using Tapatalk
Sweet! Will try this out right now :good:
Flashed beautifully thanks @CI3kener
Sent from my SAMSUNG-SGH-T989 using Tapatalk
gotta love the uber, thank you kener
Sent from my SAMSUNG-SGH-T989
Thank You !
Will this work on alpha 3??
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
JNMM said:
Will this work on alpha 3??
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Yes ?
Sent from my SAMSUNG-SGH-T989 using Tapatalk
3 New Performance Boosters
Hey Everyone,
For those of you who haven't heard I've been using "Koding" as my new kernel build server. Space is very limited with my free account but if you'd like you can click here and signup to help me get more free space. You'll also find that you can learn how to code just about anything (java, html5, php, to name a few). Many developers and adding tutorials and sharing their projects so if you are interested in that stuff make sure to sign up!
I've made two nightlies this morning which need testing. For those of you who were around for my 4.3 you might recall that somewhere along the line there was suddenly a curious SD Card Mounting/Unmounting that would happen after unlocking the phone. I had made so many commits in such a short time frame that I was unsure which one caused the error. I've gone back and added my top three performance improving commits from the questionable series to see if any of these three commits caused the error (I certainly hope they did not, I really hope it was caused by the LZ4 compression and not the performance boosters). Let me know if you see any problems as you use these nightly kernels!!! Remember these are for 4.4 ONLY!!!
Here are the links!
UBER 1.89 GHz
UBER 2 GHz
Cheers!
Cl3Kener
just to let you know i have not been getting the sd card error on the 4.4 uber
Signed up on Koding maybe you can teach me a thing of two (^o^)
Sent from my SAMSUNG-SGH-T989 using Tapatalk
Confirmed working on almites cm build
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
BETA2 For 12/16 CM Nightlies and Beyond
Hey Everyone!
Well Team Chopsticks finally got video working although from what I can tell all of the work was actually all done by our very own @bryan2894 who went and found the patches that fixed the video!!! Great work @bryan2894!!! Part of this video fix included the kernel so here is an updated kernel with the patch needed. This kernel will only have fixed video on CM 12/16 nightlies and beyond. I bet it might work with earlier but you might as well update if you are a CM user so what's the point?
Anyhow, enjoy the updates!
Cheers!
Cl3Kener
PS since I know someone will ask, This actually does work great with the 12-14 HellKat build since it also has working video because we grabbed the patches from CM before they were merged.
Sent from my SAMSUNG-SGH-T989
Question: for official CM 11 update, i am currently using recovery CWM 6.0.3.7, because CM officialssaid so or phone will run into problems. but this kernel requires TWRP, i am wondering can i update CM 11 nighlies with the given TWRP recovery?
Please advise. Thanks.
syan8182 said:
Question: for official CM 11 update, i am currently using recovery CWM 6.0.3.7, because CM officialssaid so or phone will run into problems. but this kernel requires TWRP, i am wondering can i update CM 11 nighlies with the given TWRP recovery?
Please advise. Thanks.
Click to expand...
Click to collapse
That stuff is nonsense. The latest TWRP in fact is much better for this phone and flashing this or any other ROM here IMHO. I tested both CWM and TWRP on more than one occasion and results were identical. For me TWRP is also much easier to get into when you have an issue with a new ROM booting and you need to get into recovery via the power & volume up buttons.
syan8182 said:
Question: for official CM 11 update, i am currently using recovery CWM 6.0.3.7, because CM officialssaid so or phone will run into problems. but this kernel requires TWRP, i am wondering can i update CM 11 nighlies with the given TWRP recovery?
Please advise. Thanks.
Click to expand...
Click to collapse
I've flashed CM11 (my builds) about 10 times in the last month and have been using TWRP 2.6.1.0 since Sept. without issue.
Just don't try to flash TWRP from within GooManager, either flash from recovery or use Odin (best).
Since the video recording is working now I moved to CM11 using the @Almite (Rom) and @Cl3Kener (Uber 2GHz kernel) and I can tel you this is solid Rock combination in performance and stability even those are still in Nightlies/Beta so thank you all for this amazing team work...
Is it possible to add the BLN notification (I know some don't like it but usually this the feature can be disabled)
Thanks
AOSP RIN Kernel for D851
Close to stock with some sugar added ... delicous!
Hey guys and girls,
here is my attempt to build up on the cm source for an modified AOSP kernel, hope you like it, have fun
First of, DISCLAIMER, I'm not responsible for bricked devices, dead unicorns, rainbows with missing colors, world war, nose bleed, void warranty (you know that already, don't you? your warranty is void now and it's your fault ) or any other harm happening to your device, you or people around you!
What does it serve? (Features)
AnyKernel
Kexec Hardboot patch
FauxSound support
OC to 2.7GHz and UC support
Voltage control
Intelliplug
Cpu limiter
GPU Overclocking to 675Mhz
Simple GPU Algorithm
Simple_ondemand GPU Governor fixed
fsync on/off support (on by default)
Power efficient workqueues
Dynamic management of dirty page writebacks
Dynamic Read Ahead
IO Schedulers
CFQ
DEADLINE
FIFO
FIOPS
NOOP
ROW (default)
SIO
TRIPNDROID
VR
ZEN
Governors
Adaptive
Conservative
DanceDance
Intelliminmax
Interactive (default)
Lagfree
Lionheart
OnDemand
Performance
Powersave
SmartassV2
Userspace
Wheatley
Smartmax
TCP Congestion Algorithms
BIC
Westwood+
Vegas
Veno
Yeah
HTCP
Cubic (default)
Reno
LiveSharpening
2-Way Call Recording support
exFat support
DriveDroid support
KSM
android logger sysfs toggle (disabled by default)
Many under the hood fixes
Stability
More to come
How to apply it? (Installation)
IMPORTANT: Read through all the requirements, steps and warnings before you do anything, if any requirement doesn't match or you don't know what one or more of the steps below mean or do, ask before you do any of them, if you don't know how all the steps can be done, let it be, I warned you, if you don't do and something bad happens, I'll just laugh at you!!
Requirements? Yes!
D851
Custom Recovery
AOSP based lollipop ROM (Mainly cm12 based)
How to flash the kernel?
BEWARE to be on the default kernel of the given ROM (NO custom, except at updates of this one!!) when flashing this kernel, the ramdisk is taken from the currently flashed kernel!!!
Download zip
Place on internal or external SD
Reboot to recovery
Choose install zip
Search for the downloaded zip
Confirm flashing
Wipe cache
Reboot
Have fun
Changes? (Changelog)
14.01.2015/1.6.5
FauxSound support added
Dynamic read ahead
13.01.2015/1.6
Initial AOSP release
Full list of commits can be found here
Where to get it from? (Download)
google drive | AndroidFileHost | dev host
Let me test!! (Beta Testing Community)
Google+ LG G3 Beta Testing Community
Show me the so(u)rce(ry)! (Source Code)
https://github.com/tectas/android_kernel_lge_msm8974ac/tree/rin-cm-12.0
Donators (huge thanks, you're simply great )
@Toneman07
@Helloworld294
@shaarky
@Dreamxtreme
@guyd
@mosincredible
@tobitege
@AndroidUzer
Credits
XDA for the great community
Google for their great operating system
LG for the great device
CyanogenMod for the base this is built up from
@invisiblek for his marvelous job on the bring up of the device and the many patches
@HolyAngel for some commits I used
@faux123 for his great work with intelli* and beyond
@KAsp3rd for some commits I used
@myfluxi for some commits I used
@trialsrider1 for some commits I used
@Skin1980 for his breakthroughs at our device, his support and for being such a nice guy
@Lord Boeffla for some commits I used
@GuneetAtwal for some commits I used
@DooMLoRD for some commits I used
@Fechinator for some commits I used
@savoca for AnyKernel, Livesharpening and some other stuff
@Christopher83 for his implementation of Dynamic management of dirty page writebacks and some additional stuff
If you like my work, please show your appreciation by pressing the thanks button, if you want to do more, i've nothing against a little donation, but I'm as happy when you just thank me by pressing the button
XDA:DevDB Information
Rin Kernel AOSP, Kernel for the T-Mobile LG G3
Contributors
Tectas
Source Code: https://github.com/tectas/android_kernel_lge_msm8974ac/tree/rin-cm-12.0
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 1.6.5
Beta Release Date: 2015-01-14
Created 2015-01-14
Last Updated 2015-01-14
Reserved
Awesome thanks. Heard good things about your STK LG kernel. Downloading
razrlover said:
Awesome thanks. Heard good things about your STK LG kernel. Downloading
Click to expand...
Click to collapse
Super addition to the D851 arsenal.
Thanks
P.S: Can't seem to find it in the downloads!
arifqur said:
Super addition to the D851 arsenal.
Thanks
P.S: Can't seem to find it in the downloads!
Click to expand...
Click to collapse
Sorry, link fixed.
Tectas said:
Sorry, link fixed.
Click to expand...
Click to collapse
Thanks for the link and especially thanks for being the first Dev to include kexec hard boot patch for D851 in his kernel
Heh, I managed to screw up my MultiROM setup.
Fusion LP was a tertiary ROM. I decided to flash this kernel against it. Almost 10 minutes and it never finished flashing. TWRP was also frozen.
On restart none of the ROMs would boot. Trying to reselect Fusion in MultiROM would fail and freeze/lock TWRP. Seems the partition with Fusion got corrupted.
Got tired of pulling the battery so wound up restoring primary ROM and will start over with MultiROM.
Just one of those things probably unrelated to the kernel itself.
I should have at least backed up the secondary ROM. Oh well. ?
Small update to 1.6.5:
14.01.2015/1.6.5
FauxSound support added
Dynamic read ahead
Download within the OP, have fun
Tectas said:
Small update to 1.6.5:
14.01.2015/1.6.5
FauxSound support added
Dynamic read ahead
Download within the OP, have fun
Click to expand...
Click to collapse
Thanks
Working well so far, thanks :good:
marcdw said:
Heh, I managed to screw up my MultiROM setup.
Fusion LP was a tertiary ROM. I decided to flash this kernel against it. Almost 10 minutes and it never finished flashing. TWRP was also frozen.
On restart none of the ROMs would boot. Trying to reselect Fusion in MultiROM would fail and freeze/lock TWRP. Seems the partition with Fusion got corrupted.
Got tired of pulling the battery so wound up restoring primary ROM and will start over with MultiROM.
Just one of those things probably unrelated to the kernel itself.
I should have at least backed up the secondary ROM. Oh well. ?
Click to expand...
Click to collapse
I'm using it with Fusion as primary ROM with no problems. But flashing fusion itself takes close to ten minutes to flash, and the progress bar shows nothing until it's done. I was already on fusion, then flashed RIN and Multirom.
Never mind.
Working well with Euphoria.
Thanks for a great AOSP kernel
joshuajones said:
I'm using it with Fusion as primary ROM with no problems. But flashing fusion itself takes close to ten minutes to flash, and the progress bar shows nothing until it's done. I was already on fusion, then flashed RIN and Multirom.
Click to expand...
Click to collapse
I changed my primary SkyDragon ROM then reflashed kexec kernel and multirom. Discovered my CM11 was still there (cool) then reflashed Fusion.
Flashed RIN kernel but this time I waited. It took much longer than the ROM install.
But all is good. Fusion seems to be running great with RIN.
Thanks.
Sent from my LG-D851 using Tapatalk
Kernel is working great
I've used this Kernel on about 3 different LP ROM's (clean flash) and on each of them, the pull down menu appears and freezes after ending calls whether its being made or receiving them. If you are able to get out of the menu, the pull down no longer works. You must reboot for everything to return to normal...
Nothing says great batterylife except when it tells me 1 day 19 hours and hasnt been on a charger since 8 am
Nice kernel exelent battery and no complains for now ?
Been off charger all day with light use and its still going strong
scribbles92 said:
I've used this Kernel on about 3 different LP ROM's (clean flash) and on each of them, the pull down menu appears and freezes after ending calls whether its being made or receiving them. If you are able to get out of the menu, the pull down no longer works. You must reboot for everything to return to normal...
Click to expand...
Click to collapse
Done a few clean flashes since I started using this kernel but I'm not having this problem...