{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AOSP Kernels for HTC's 8x50, 7x30, and 8x60 Devices
Also available for the Motorola XoomAfter much testing, developing, and debugging, Team Tiamat Xoom is proud to present Backtrack 5 with Aircrack for Motorola Xoom! Backtrack 5 is a Linux Distro designed specifically for Information Security (InfoSec) professionals. Aircrack is a software suite for wireless network vulnerability and penetration testing (pentest). We are very excited that we have been able to unify Backtrack, Aircrack, and the Xoom to produce a robust, unified, and mobile security solution.
UPDATE 1/31/12: I'm putting fresh links up do to popular demand. I no longer support this project except in the context of producing an ICS 2.6.39 kernel with compat wireless capabilities. Don't ask when I'll have the kernel. I'll let you know when i have it.
Click to expand...
Click to collapse
Resources for Honeycomb
Link for the BT5 Image Installer Here
Link for the kernel with modules here
Click to expand...
Click to collapse
UPDATE 2/7/12: Updated to ICS version with 2.6.39.4 rtl8187 driver. Shortly, I'll post a kernel with all supported USB Wireless drivers. If you don't know what this is, don't download it. I am not babysitting this thread. However, if you have an intelligent question, I'm sure some of the more motivated users may be able to help.
Download Backtrack 5 for Xoom ICS
Download ICS Xoom Development Overlay rev 4 which contains the needed kernel and various BT5 scripts
Download Backtrack 5 Flashable Zip Remover Tool much love and credit to Iruiz2!
Click to expand...
Click to collapse
Please be advised: The purpose of this thread is to release the Tiamat Xoom Backtrack 5 with Aircrack Expansion Pack. It is also to advance the Android implementation of this suite, along with discussion of drivers, dongles, and other aspects AS IT PERTAINS TO ANDROID. This is not the thread for asking about how to use the software suite. There are countless sources on the internet on which to find information about using the software suite. Also, due to the nature of this software, it may be a violation of XDA policy to discuss certain aspects of vulnerability testing, network penetration, and the like. I will personally follow up with XDA Moderation to determine what is fair game and what it not. Upon receiving guidance from moderation, I will open a thread in the Xoom General section for sharing scripts, tips, strategies, etc.
Tiamat Xoom Moray BT5 Power User Expansion Pack
DEPRICATED -- Use the development overlay in the Tegra Hardware and Feature Implementation thread or just download in the above post.
Tiamat Xoom Rom users who use the Backtrack 5 package should be able to flash rom upgrades on not skip a beat! Simply flash this expansion pack over your Tiamat Xoom Moray rom update to keep backtrack running and add functionality.
RELEASE PAGE
HIGHLIGHTS
Dynamic BCM4329 MAC address change script
Modules for virtually every usb wifi dongle out there
bt5.img mount and unmount script for easy file access
mount symlinked to android root for easy file access
bt5 script in /xbin for easy chroot shell access
ftdi_sio.ko, pl2303.ko, and pegasus.ko for the guys over on the Xoom General board (see, I remember )
NEW BT5 Script and Resource Flash Zip tool
tcpdump
And, of course, Tiamat Tachi 2.1 stock gpu kernel
This pack replaces the wifi-fix download
Tools
ConnectBot for HoneycombGrab it here . Much credit and thanks to arctu for putting this together. You can have many shells open and easily access them for processing jobs
Awesome
Will your MOD also work with an VNC Client like "BackTrack 5 ARM (with GUI via TightVNCServer)" from here http://forum.xda-developers.com/showthread.php?t=1074723 ?
Nice
My, you have been busy! Nice work.
Nice work --
I'm wondering if users can contribute specific dongles that support monitoring mode with packet injection. I've only used pcmcia cards for monitoring mode. I'm also aware different chipsets seem to perform better than others. I've had good look with the atheros (mad_wifi driver) and broadcom (b43 driver) cards, however I'm aware usb dongles may contain different chipsets. If users could contribute whats working it would be great.
kevdog said:
Nice work --
I'm wondering if users can contribute specific dongles that support monitoring mode with packet injection. I've only used pcmcia cards for monitoring mode. I'm also aware different chipsets seem to perform better than others. I've had good look with the atheros (mad_wifi driver) and broadcom (b43 driver) cards, however I'm aware usb dongles may contain different chipsets. If users could contribute whats working it would be great.
Click to expand...
Click to collapse
Sup kevdog. Ya, that would be perfect. In fact I got 2 OP spots to update with that info. Personally, I have an Alfa and a Netgear dongle and both work well. The Alfa works great. If users could post confirmed working dongles with a link to purchase, that could be useful. Also, I know Solarnz has a dlink that works. However, that dongle required additional firmware to be installed inside the BT image. I haven't addressed firmware yet, but this is an open-ended project in which community involvement is welcome.
bluedragon1982 said:
Awesome
Will your MOD also work with an VNC Client like "BackTrack 5 ARM (with GUI via TightVNCServer)" from here http://forum.xda-developers.com/showthread.php?t=1074723 ?
Click to expand...
Click to collapse
I'm not sure. We used the stock BT5 ARM distro as a base. So if tightvncserver is included, it should. If not, you can always dpkg -i it. Keep in mind, we see no use for vnc in this enviroment and will not be supporting it. This is all shell sir , the way a good pentest enviro should be
bigrushdog said:
I'm not sure. We used the stock BT5 ARM distro as a base. So if tightvncserver is included, it should. If not, you can always dpkg -i it. Keep in mind, we see no use for vnc in this enviroment and will not be supporting it. This is all shell sir , the way a good pentest enviro should be
Click to expand...
Click to collapse
The link i posted, is based of "ARM with Gnome" so there is a gui. I dont know if your version also has a gui.
All i know is that vncserver is a part of BT5.
Sent from my Nexus One using xda premium
My wifi is broken after installing the zip file via CWM. Shows 'Error' under Wifi in the settings. Any ideas? Do I *need* a dongle to use this add-on?
I truely have no use for this, but this is great development for the xoom! Congratulations on another wonderful piece of work!
Awesome work OP. I have a Netgear dongle lying around to play with. Will report results later.
Broken wifi
After I flashed this my WiFi broke
[No message]
^^ demonstration of how speechless I am by the level of contributions made by the awesome developers on Tiamat and Rogue.
Sorry about the wifi guys
Fix here
It wasn't flashing the kernel right. I missed it because me and the testers already had the kernel installed. Now we're in the game
I know this is Tiamet but will this work with Moray? I want to flash but I don't want to mess anything up.
gqstatus0685 said:
I know this is Tiamet but will this work with Moray? I want to flash but I don't want to mess anything up.
Click to expand...
Click to collapse
Yes. In fact it should work with any rooted Xoom.
BRD...this is great news. I can't wait to get my Xoom back next week. I let my son borrow mine for college. He isn't really using it so he is sending it back to me. I played the the BT5 ARM version when it was first release but it was limited. Looks like this addresses those limitations.
Great job as always
thnx
thanx for this you guys..
can you pleas provide a tut....that will allow me to go into GUI mode ?
thnx in advance
Related
Hi guys,
Compiled Cyanogen 6 from sources:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
All right folks, everything is now part of CMSGS project. See http://cmsgs.com and http://github.com/cmsgs
Use build instructions from http://cmsgs.com/mediawiki/index.php?title=Building_from_Source
Before building apply local patches from device/samsung/galaxytab/patches
After building use tools from device/samsung/galaxytab/tools to build kernel and build factoryfs.ext4 from system.img, read the readme files
Thanks to Deodexed, who provided his hosting, we now have public beta
Only for people with GSM tabs who know how to use adb and heimdall
If you dont know how to backup and restore your tab don't try it!
Grab: http://files.deodexed.com/ModADroid-Galaxy-Tablet/Technomancer/cm6beta.zip
Read the readme file and have fun ;-)
The Tab should be partitioned with P1_add_hidden like for JJ4 or later ROMs.
If anyone wants to use Odin, rename factoryfs.ext4 to factoryfs.rfs and tar all rfs files and zImage and Odin should be able to flash it too.
Status:
What works
Phone calls, data
Wifi
Bluetooth Keyboard
GPS
Buttons backlight - linked to LCD backlight
Sensors:
- BMA020/BMA150 Accelerometer
- AK8973B
What doesn't
Camera
Sensors:
- BH1721FVC light sensor
- L3G4200D gyro
- Some are probably screwed up because of hwrotation = 90
Bluetooth Audio
Issues and workarounds
* Stuck on CM boot ani after flash
Probably / data is not mounted.
run "adb shell mount"
it will show list of mounted partitions, if /data is not mounted to /dev/block/mmcblk0p2 as rfs, format the /data partiton.
To do that "adb reboot recovery". "adb shell" when in recovery, "parted /dev/block/mmcblk0", initialize/format partition 2 to fat32 using "mkfs 2 fat32"
* BT doesnt start
Try again
Try rebooting
If that doesnt help try "adb shell stop hciattach" Sometimes hciattach service gets stuck when starting. I have added code to stop it automatically.
Latest fixes:
2011-01-20
Replaced lights with my own built from source
The linking of backlight and button light is now done in lights module instead of java LightsService
Replace copybit and s3cjpeg modules with ones from noobnl's samsung/common
2011-01-19
Switch to Nexus S libaudio. Much simpler, doesn't crash and Bluetooth headset shows some signs of life.
2011-01-17
Fix p1_keyboard.kl, remove key codes unsupported in CM. add left and right alt.
Fixed exec flags on recovery executables
2011-01-16
Moved everything to http://github.com/cmsgs
This build should be functionally the same as previous one
2011-01-15
Fix vold configuration so usb mount/unmount works
Add code to bt_enable to stop hciattach service if it is stuck.
older
Switched back to binary vold which is better and enables UMS
Force Phone app to start with speaker on
Switch to su built from sources
Big thanks to
noobnl, coolya and codeworkx for advice and CMSGS work
Current testers:
lilstevie
A_Snowman
JeffR714
Landroid
clmntch
ayman07
You can catch me on Freenode as TCMAN-dmg
This is quite amazing. Great job. Do you really think you need to build it all from source? Can't you just modify the current build instead of starting from scratch? Wouldn't it be faster. Please people don't bug the dev about doing testing or helping if you have NO dev experience. I'm sure he will release it if it's stable enough. This thread is gonna get raped in sure of it
ayman07 said:
This is quite amazing. Great job. Do you really think you need to build it all from source? Can't you just modify the current build instead of starting from scratch? Wouldn't it be faster. Please people don't bug the dev about doing testing or helping if you have NO dev experience. I'm sure he will release it if it's stable enough. This thread is gonna get raped in sure of it
Click to expand...
Click to collapse
I have already built it (CM6 for Galaxy S) from source once, its not that bad.
I will need to create my own initramfs and proprietary samsung device files extracted from Tab ROM to get camera,wifi,bt and other stuff working.
Now where is my jar of vaseline ;-)
This is exactly what I've been waiting for!
Nice one
Sent from my GT-P1000 using XDA App
What about the Sprint Galaxy Tab?
This is awesome. I have the sprint tab and I always feel like my n1 running cm performs so much better than the tab even though the tab has more powerful hardware. Can't wait for this and certainly willing to help whether that be through testing or donations.
Sent from my Nexus One using XDA App
I only have ATT Tab so I can only do GSM development. But if any devs with Sprint or Verizon Tabs wanna join we can set up some git repositories ans cooperate.
So galaxy tab friendly our no?
Sent from my unlocked and rooted SGH-I987 using XDA App
Wow, this is awesome
Super Awsome buddy! All the best.
This is awesome work, but note it is really really unstable at the moment.
Last night when I was helping test it really did hose things, had to repartition and reformat the entire internal MMC to get any default firmwares to even boot again
But this is a good sign for the future
i cant wait for this
bumpity bumpy bump
CM 6 compiled from sources now! Looking for testers , see first post
Now to pull from the CM7 source for some Gingerbread goodness
I can test if you want, running JME at the moment on a GSM Tab.
knightnz said:
Now to pull from the CM7 source for some Gingerbread goodness
I can test if you want, running JME at the moment on a GSM Tab.
Click to expand...
Click to collapse
Gingerbread goodness most likely requires newer kernel (2.6.35) so its not that easy ;-(
Will a cdma version be worked on or no?
Sent from my ADR6300 using XDA App
I would test but im not very good at android. I can flash my N1 like the best of them thou.
Sent from my AT&T TAB using XDA App
papi92 said:
Will a cdma version be worked on or no?
Click to expand...
Click to collapse
No
You are welcome to start working on it yourself
coming along well, hope its read by the time i get my tab. keep up the good work
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And thank you all for your Ad clicking and donations. You guys are awesome!
Android Market Link [free]
ROM Factory
What is ROM Factory?
Its a tool that will allow the user to create a picture perfect .img from your boot and system partition. It will then create an update.zip from it.
What is a "Fruit Cake"?
A fruit cake is the finish product, a self contain rom, already ready for installation, already inside an update.zip.
So really what does it do?
It allows a bootloader unlocked user to create a full copy of their boot and system partition. All of it, including mods and changes done to either one of those partitions.
Can this be use for easier rom development?
Yes! Beyond just its normal capabilities! After installing the resources you can modify the script and add things to it in *sdcard* /fcm/workdir! Once you are done adding and changing things in there, press "Create ROM".
Supported Devices:
olympus (atrix), sunfire (photon), triumph, WX435, fb0 (triumph), p999 (lg g2x), p990 (lg o2x), p970 (lg optimus black), ace (htc desired hd), pyramid (htc sensation), galaxys2, GT-I9100, GT-I9100M, GT-I9100T, SGH-I777, SGH-I727, hercules, crespo (nexus s), crespo4g (nexus s 4g), toro (cdma galaxy nexus), maguro (gsm galaxy nexus)
Experimental Support:
umts_jordan(defy), wingray, stingray (xoom)
Your phone must be rooted!
Step One: Press the Install Resources button on screen.
Patience this step could take up to 5 minutes.
Step Two: Press the Create Fruit Cake button on the screen.
Patience this step could take up to 5 minutes.
You use this application at your own risk, I am in no way responsible for any damage this application causes.
Oficial Support for Galaxy S2
Back Up mode = Further information is needed to enable back up mode for this device
Am I right to understand that this is an alternative to taking Nandroid backup?.
hacksome said:
Am I right to understand that this is an alternative to taking Nandroid backup?.
Click to expand...
Click to collapse
no 10 xchar
So it will create an update.zip which is CWM flashable? How about generating a .tar.md5 for Odin?
Anyways, great work! Looking forward to this!
hacksome said:
Am I right to understand that this is an alternative to taking Nandroid backup?.
Click to expand...
Click to collapse
Sounds like it, looks cool non the less.
Sent from my GT-I9100 using XDA App
Kingybear said:
Sounds like it, looks cool non the less.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Afaik a nandroid backup is everything including data folder. This one i think is a little less than that. As op said it copies the rom so devs can pass them to their beta testers etc. A nandoid backup is including ur personal settings like bookmarks or last viewed webpages and contacts etc. And a nandroid backup is recovery dependant. Afaik a nandroid from a cwm v4 base wont be suitable for a phone with a cwm v5 phone.
Sent from my GT-I9100 using Tapatalk
FCM RC3 v1.4.4
FCM RC3 v1.4.4(Current Release)
Release Notes
Added Reset Option Menu.
Re-write the engine that configures the phone install!
fixed a bug on photon 4g.
fixed the force close of doom bug.
fixed sgs2att issues
fixed sgs2att install script
fixes to various bugs
Added support for latest ics
GUI Touch Ups
Added Experimental Support:
triumph, WX435, fb0, p999, p990, p970, ace, pyramid, galaxys2, GT-I9100, GT-I9100M, GT-I9100T, SGH-I777, SGH-I727, hercules, crespo, crespo4g, toro, maguro
#FCM RC4 v1.5(Current Release)
-GUI Enhancements
Multiple Screen Size support
Tablet Support
A new themed layout
NO MORE ADS
-Script Engine Enhancements
Options, ie: Dev name, rom name, save rom preferences.
-Performance
Complete Re-write of the install and create methods (faster performance)
The reset button is bye bye! The app will now erase the workdir as it creates the rom!
Hello Guys
Is anyone experiencing issues, someone msg me about some installation issues, but did not really offer any info. If you are an user and you are suffering from install issues, let me know!
guys for latest info always check http://fcm.x10.mx/joomla/
1.6 - The update that took a month. Will be release today. This will be amazing. I'm just waiting on testers.
Advance Mode
Apps Mode
Back Up Mode
New look
Open Source components
New site, new forums, new devices.
The update will be made available late tonight or early tomorrow. Depends on how tire I am after i get off work.
We are alive and kicking. Since release, Fruit Cake Maker has been downloaded 1,956 times. We are 556 active developers. A total of 12 bugs have been crushed. We currently work on 20+ devices and devices variants.
Nightlys and experimental.
Starting Feb 1st or 2nd. My build bot will begin auto compiling nightlys for those who want to experiment with the latest changes. Nightlys will be compile each night and made available no later than midnight.
An experimental build will begin to be compile mid Feb. the build will be compile every friday at 6pm. The experimental build will feture a different preference screen, and will require the user to specify all the variables. ie: boot location, system location, storage, mode. so on. This build aims at enthusiast who wish to use the tool on a non supported device.
FCM now has requirements. Busybox must be installed to use the back up mode.
Thank guys for your support.
I think it's great personally, used it on DHD also with ease.
I'm surprised this project doesn't receive more attention.
It certainly deserves it.
Many thanks
Wow. If I get it well, it create a flashable zip image of your current installation, with apps etc?
Wow. That will be a lot easier to share beta ROMs in the future.
Many many thanks.
Envoyé depuis mon GT-I9100 avec Tapatalk
I'm currently waiting on Google.
I submitted the new version into the market, but somehow i ended up with an older version being available for download. hopefully this issue will be solved soon. I'm sorry for the inconvenience.
1.6 finally!
Some of the testers are reporting errors with the new modes, but changing storage location seem to be working quit good. I will be writing a tutorial on how to properly use all the new modes. Regardless, this new version requires Busybox for app mode, and back up mode. It must be installed on /system/xbin << same location used by cm7 and cm9. I will be releasing a new version tomorrow or Thursday, to fix some of the new mode woes.
Again, sorry for the inconvenience.
Very good work!
Awesome! keep the good work, I will try it tonight from home.
Sounds Great
Hello,
The ROM Factory sounds like a great Idea, im not a developer but i can see why its great for devs,
Question is, will it be useful for just a user like I am?
if i am to use it to back up, how does it differ from Titanium and CWM NAND backup?
Thanks
Go read post #7
JOdin3 Web Browser Based and Offline flashing tool
This is the official support page for JOdin3, a CASUAL-X project. JOdin3 allows you to flash Odin files on Linux, Mac and Windows. It is powered by CASUAL and @Benjamin Dobell 's Heimdall tool. Using the power of CASUALcore, LibPit and Heimdall, it enables flashing of Odin files in the same manner you'd expect from the offical Samsung Odin tool.
Read more: http://casual-dev.com/2014/01/04/jodin3-web-browser-or-offline-flashing-tool/
Website: http://Jodin3.casual-dev.com
Download:http://goo.im/devs/AdamOutler/JOdin3
Never download from anywhere except the link above. I won't have the CASUAL name tarnished with malware. Also, verify that your download has the proper signatures with the "jar-signer -verify" command.
Easy flashing
We expect this to be relatively trouble-free. However, there are some stumbling blocks. First, JOdin3 requires a PIT file, which can be automatically obtained, but it requires a device reboot. Jodin3 will walk you through this process. On windows, drivers should be auto-installed. On Mac, Heimdall will be auto-installed. On debian-based Linux, Heimdall will be automatically installed and you will receive in-app instructions on all platforms.
With that said, 99.9999% of problems should be solvable with the simple troubleshooting guide below
Troubleshooting Guide
Mac: Visit the Heimdall Website and install the packages for your distribution, then reboot: http://glassechidna.com.au/heimdall/
Linux: Visit the Heimdall Website and install the packages for your distribution: http://glassechidna.com.au/heimdall/
Windows: Put your device into Download mode, install this driver and reboot. http://android-casual.googlecode.co...ALcore/src/CASUAL/resources/heimdall/CADI.exe
media
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Special instructions for Mac:
About
This is a CASUAL-X project. CASUAL-X projects are based on or around CASUAL but not part of the main stream. This CASUAL-X project will be updated alongside of CASUALcore and will be available as long as our servers can handle the load. You can read more about CASUAL at http://casual-dev.com
Credits
@Benjamin Dobell for creating Heimdall
@jrloper for streamlining processes and creating drivers
@Loglud for providing the server space and many helpful utilities which enable this
@Ralekdev for analyzing PIT files helping me to gain a better understanding of how they function
Truly an honor working with you Adam
casual-dev
Greetings,
I haven't had a chance to use JOdin3 yet. I am super excited and hoping it will help get my bootloader unlocked. I was worried I wouldn't be able to get there after taking the Dec 20th OTA. The forums seemed pretty barren for those with bootloaders still locked =/. Plus, the Note 2 is old enough now that I am guessing support is falling off.
Just a two, hopefully helpful comments:
It appears the JOdin3 link on the bottom of the post on the homepage has a typo. It is currently "jodin.casual-dev.com" which 404s.
Another smaller but possibly still important issue is: the link on casual-dev.com to this post "http://forum.xda-developers.com/showthread.php?p=49133090" doesn't appear to be in an <a href> tag.
Thanks for all the hard work!
Edit: I tried to follow the youtube tutorial and JOdin seems to think my pit file is corrupt. I also tried to create a pit file manually using Heimdall and still had no luck. I suspect it is due to me having taken 4.3 OTA (I605VRUEMJ9). I was able to get root using safe root ("Based on the CVE-2013-6282 exploit by cubeundcube"), not sure if that helps. Also not sure if it's relevant but, while I can get recoveries installed but, on reboot phone complains and i have to flash stock to continue.
I had to lit. download odin for every flash... this should end the days for that. Great! thanks @AdamOutler and team. A compatible odin, I wonder how this works with models like galaxy wonder etc.
Thanks for your hard work. So is Odin opensource ? How did you accessed to download mode protocol ? Really interesting..
Hey guys, nice work. Now I once thought about something like that, too, but I had another idea: Maybe it would be somehow possible that you don't need to download a firmware but just paste a download link or something like that in jodin3 to flash it. Just a crazy idea
Gesendet von meinem SM-N9005 mit Tapatalk
I use a Mac and only heimdall is available on it. It was very difficult to use and odin was not compatible with it. But now with JOdin3, I can easily root and flash my devices. A huge thanks to all the developer team.
Sent from my GT-N7100 using XDA Premium 4 mobile app
---------- Post added at 07:30 PM ---------- Previous post was at 07:25 PM ----------
imstar19 said:
I use a Mac and only heimdall is available on it. It was very difficult to use and odin was not compatible with it. But now with JOdin3, I can easily root and flash my devices. A huge thanks to all the developer team.
Please post a basic guide on how to begin with JOdin3.
Click to expand...
Click to collapse
Thanks for your hard work. I run a Linux (Open Suse) and I always had to use my wife's laptop. Now I don't need to talk to her anymore..... Just kidding
Saw this just on Google + and now it's already in portal! Even though I don't have a Samsung device anymore, maybe in future I will and this helps me in helping others. Thanks!
Edit. Oh first page F yeah!
Sent from my Nexus 5 using XDA Premium 4 mobile app
Many thanks for your continued efforts to make customizing and fixing phones THAT much better! Truly next level work. I've never had issues with regular Odin that wasn't my fault or the wrong download, but awesome that we have options like this to work across all the major platforms.
Adam. Are you going to be able to help us unlock the bootloader on the note 3.
Sent from my SM-N900V using Xparent BlueTapatalk 2
yashade2001 said:
Thanks for your hard work. So is Odin opensource ? How did you accessed to download mode protocol ? Really interesting..
Click to expand...
Click to collapse
No way, but Heimdall is an >90% perfect implementation of download mode.
It also requires manually matching partition image filenames to partition IDs or (in the official GUI version) loading a package -- both require a little manual work to convert from Odin format: this tool is an alternative UI that does the conversion on the fly!
first of all HAPPY NEW YEAR TO @AdamOutler
i wanna ask that what is meant by web based flashing and then i wanna ask that what is the difference between this and simple odin
freefalling0411 said:
Adam. Are you going to be able to help us unlock the bootloader on the note 3.
Sent from my SM-N900V using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
+1
aditya rathee said:
first of all HAPPY NEW YEAR TO @AdamOutler
i wanna ask that what is meant by web based flashing and then i wanna ask that what is the difference between this and simple odin
Click to expand...
Click to collapse
Its exactly what it sounds like. You go to a website and flash your phone. If you want, you can download the app and use it like that.
The difference: This works on Windows, Linux and Mac. This works from a website or a download. This will auto-install drivers on all platforms except Mac ( @Benjamin Dobell needs a Mac Developer ID signer). This is a self-contained single-file executable. This provides better errors and will troubleshoot and fix problems for you. This is a single file rather than multiple ones. This provides way more detailed logs rather than a simple failure like Odin. And its open source.
Its not all roses though.. This can only flash a single device per-start-button-press and not 8 like Odin. Heimdall also has a problem with extremely large files like Note III system images.
AdamOutler said:
Its exactly what it sounds like. You go to a website and flash your phone. If you want, you can download the app and use it like that.
The difference: This works on Windows, Linux and Mac. This works from a website or a download. This will auto-install drivers on all platforms except Mac ( @Benjamin Dobell needs a Mac Developer ID signer). This is a self-contained single-file executable. This provides better errors and will troubleshoot and fix problems for you. This is a single file rather than multiple ones. This provides way more detailed logs rather than a simple failure like Odin. And its open source.
Its not all roses though.. This can only flash a single device per-start-button-press and not 8 like Odin. Heimdall also has a problem with extremely large files like Note III system images.
Click to expand...
Click to collapse
thanks sir got it
Totally awesome is this compatible for the note 2 and 3?
TappEd from my Note II
Check out my website for encouragement....
www.projectintercession.blogspot.com
What an accomplishment! Brilliant work guys!
As a Ubuntu-Linux user I was waiting for an easier solution for flashing our Samsungs. This will be awesome. Thank you for the fantastic work.
I have an updated Ubuntu system with:
java version "1.7.0_25"
OpenJDK Runtime Environment (IcedTea 2.3.12) (7u25-2.3.12-4ubuntu3)
OpenJDK 64-Bit Server VM (build 23.7-b01, mixed mode)
But upon launching JOdin3 I get this message:
"This application requires a newer version of the Java runtime"
Is this a known problem?
(I'd prefer not to install the Oracle version ... if this is indeed a solution for this, hopefully temporary, problem)
Thank you so much.
freefalling0411 said:
Adam. Are you going to be able to help us unlock the bootloader on the note 3.
Sent from my SM-N900V using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
NinCaptain said:
+1
Click to expand...
Click to collapse
++1 :crying:
Or maybe African-Canadian Sock Monkey may need to help us out once again
Hi,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a port of Sailfish OS to the Xiaomi Mi Mix 2 (aka chiron).
At the moment this is a very early state port.
Current state: Alpha 1
Download:
Sailfish OS Version 2.x (work in progress)
ROM lineage-14.1-20171229_174133-UNOFFICIAL-chiron.zip
Alpha 1: sailfishos-chiron-release-2.1.3.7-guhl180103.zip (current)
Installation:
Be warned. This will wipe all your data and you will get a very, very early user experience!
Remark: The installation of the correct LOS (14.1 for SF 2.x) image is only necessary once. So if you already did this the first time you can skip steps 1,2 and 5.2
1. Boot into fastboot mode and format the data partition using the command:
Code:
fastboot format userdata
2. Boot into your custom Android Recovery (TWRP) and make sure that the sdcard is mounted
3. Upload the LOS release:
Code:
adb push lineage-14.1-20171229_174133-UNOFFICIAL-chiron.zip /sdcard/
4. Upload Sailfish OS:
Code:
adb push sailfishos-chiron-release-2.1.3.7-guhl180103.zip /sdcard/
5. In the Recovery on the device:
5.1. Clear data and cache (factory reset)
5.2. Install the CM release by picking the CM image (this is needed so that the correct version of the binary libraries and firmware files are in place)
5.3. Install Sailfish OS by picking the SFOS image (this will take quite some time)
6. Reboot the device
After the initial boot the language selection and initial setup will show.
You have to skip the WLAN connection because there is no working WLAN or modem atm.
After that it will take a while and then the Jolla tutorial should come up. You can skip the tutorial if you want by clicking the corners of the screen in the following sequence: Top-Left, Top-Right, Bottom-Right, Bottom-Left.
Change-log:
Version 20180103
What works:
Telnet access via USB to the device on IP 192.168.2.15 and port 2323
ssh access for the user nemo after Remote connection is enabled in Developer tools in Settings
GUI
You can play Galaxy Attack if you enable the on screen controls as sensors do not work yet (click on top-right corner)
What does not work:
everything else
Credits:
mal, sledges, MisterMagister - et al. from the #sailfish-porters IRC channel on freenode
These guys are doing amazing work and their competence and readiness to help is really inspiring.
Without their support this would not be possible!
If you want to help and participate, please find me on IRC
Have fun - Guhl
Sweet, looking forward to checking it out
Thanks for supporting mix 2 :laugh:,
Its great to see support for our device increases with every passing day. Loving it . Looking forward to it
This is so cool. Thanks for supporting this phone.
Waiting .....Thanx
***TAPATALKING***
What time with it!
Nice.
Waiting to test it
Interesting stuff, thanks for keeping the MIX 2 dev scene alive!
Great work, wait for 1 st public build
Hi,
thanks for the encouragement!
Currently I am fighting with the Wifi driver. As soon as I have this up I'll upload the first ROM.
Have fun - Guhl
Cool. I'm really interested in trying this ever since I heard the Turing phone uses it.
cant wait..
good luck
Well, on to the important stuff! Do bluetooth audio, proximity sensor, and VoLTE work!?!?!?
Just kidding. Cool that you're bringing Sailfish to this phone. Best of luck
duraaraa said:
Well, on to the important stuff! Do bluetooth audio, proximity sensor, and VoLTE work!?!?!?
Click to expand...
Click to collapse
Hehe!
Well atm still nothing works but hwcomposer (screen output) and touchscreen.
Porting for a device that has a 4.4 kernel (no Sailfish OS port is using such a recent kernel) and not even having the real kernel sources for the device is challenging.
But I wanted a challenging device for my 4th Sailfish OS port so nothing to complain.
I am making progress on the Wifi but i am still not there.
Have fun - Guhl
guhl99 said:
Hehe!
Well atm still nothing works but hwcomposer (screen output) and touchscreen.
Porting for a device that has a 4.4 kernel (no Sailfish OS port is using such a recent kernel) and not even having the real kernel sources for the device is challenging.
But I wanted a challenging device for my 4th Sailfish OS port so nothing to complain.
I am making progress on the Wifi but i am still not there.
Have fun - Guhl
Click to expand...
Click to collapse
Take you time. Merry Christmas
Great new
Waiting ??
Does the mi mix support sellfish
Coz if it does Itz awesome
Alpha 1 -> Sailfish OS 2.1.3.7
Hi,
I released Alpha 1 and updated the OP.
See installation instructions and changelog in OP.
I can not press enough that this is Alpha 1. No Wifi, no modem, no sensors, no nothing. Only the Sailfish GUI user experience and you can play Galaxy Attack. Yes Galaxy Attack and that even in HD
The installation process will wipe your user data. So you better know how to backup/restore your stuff.
I would be happy if you give it a try but of course I understand that there is a lot to loose (but well, you get Galaxy Attack).
Have fun - Guhl
guhl99 said:
Hi,
I released Alpha 1 and updated the OP.
See installation instructions and changelog in OP.
I can not press enough that this is Alpha 1. No Wifi, no modem, no sensors, no nothing. Only the Sailfish GUI user experience and you can play Galaxy Attack. Yes Galaxy Attack and that even in HD
The installation process will wipe your user data. So you better know how to backup/restore your stuff.
I would be happy if you give it a try but of course I understand that there is a lot to loose (but well, you get Galaxy Attack).
Have fun - Guhl
Click to expand...
Click to collapse
Wait, does this mean it's possible to Port Android 4.4?!
nima0003 said:
Wait, does this mean it's possible to Port Android 4.4?!
Click to expand...
Click to collapse
What do you mean by that.
Are you referring to Alian Dalvik that is running on Jolla Phones to run Android? Well yes that would be Android 4.4.
But Alien Dalvik won't be running on this Sailfish OS port anyway as it is a licensed closed source product that must not be installed on Sailfish OS ports.
Well whatever. I personally do not care for any kind of Android Version or Android anymore. Otherwise I would not use my time to port Sailfish OS to other phones.
Have fun - Guhl
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A project by Offensive Security
The Kali NetHunter is an Android penetration testing platform targeted towards Nexus and OnePlus devices built on top of Kali Linux, which includes some special and unique features. Of course, you have all the usual Kali tools in NetHunter as well as the ability to get a full VNC session from your phone to a graphical Kali chroot, however the strength of NetHunter does not end there. We've incorporated some amazing features into the NetHunter OS which are both powerful and unique. From pre-programmed HID Keyboard (Teensy) attacks, to BadUSB Man In The Middle attacks, to one-click MANA Evil Access Point setups, access to the Offensive Security Exploit Database... And yes, NetHunter natively supports wireless 802.11 frame injection with a variety of supported USB NICs.
Download :
Kernel
Magisk NetHunter Module Thread
Full chroot archive
Or
Minimal chroot archive
Installation :
Code:
Download the Kernel and latest Magisk NetHunter Module and flash it
Reboot
Download chroot archive of your choice
Extract the archive in /sdcard
Open net hunter app
Click on Kali chroot manager and select SD card
Chroot will start installing (approx. 10 mins)
Open net hunter terminal app
Choose kali
And type apt-get update && dist-upgrade
Credits :
Offensive Security
@kenny3fcb
@Atharva Ambre[AT]
@jcadduono
@DD3Boh & @cosmedd
XDA:DevDB Information
Kali Nethunter, Kernel for the Lenovo ZUK Z2 (Plus)
Contributors
kenny3fcb, Atharva Ambre[AT]
Source Code: https://github.com/kenny3fcb/kernel_zuk_msm8996/commits/nethunter-8.1
Version Information
Status: Beta
Beta Release Date: 2018-07-08
Created 2018-07-08
Last Updated 2018-07-08
Changelogs
Version 0.1 :
- Initial build
Version 0.2 :
- Improvements from aosip default kernel
- Performance improvements compared to 0.1 build
- Enabled F2FS filesystem support
- Compiled with -O3 optimization
Reserved pt.2
Could you post some kernel features ?
abhi.goel said:
Could you post some kernel features ?
Click to expand...
Click to collapse
WiFi attacks now are supported I.e u can connect external WiFi adapters for monitor mode.
HID works. (Still need confirmation)
MITM etc etc works...
Screenshots:-
WiFi adapter used:- TP LINK 722n
Confined working.
Nice dud thanks
Are internal WiFi card work or we should use external
zakaria12 said:
Nice dud thanks
Are internal WiFi card work or we should use external
Click to expand...
Click to collapse
No unfortunately the chipset that is used by our device is Qualcomm atheros so it doesn't support internal WiFi chipset....it will definetly support all the external major Realtek or Atheros WiFi adapters which supports MONITOR MODE & PACKET INJECTION.
Does it support non Treble rom?
mouadh97 said:
Does it support non Treble rom?
Click to expand...
Click to collapse
as the label says
no it's not
Sent from my z2_plus using XDA Labs
Finally nethunter!!
I will check it out tommorow, thx man!!
Oh my god. I've been waiting for this. Nethunter on zuk z2. Definitely gonna test it. By the way, why there is unofficial tag in thread name?
ChetanLokhande said:
Oh my god. I've been waiting for this. Nethunter on zuk z2. Definitely gonna test it. By the way, why there is unofficial tag in thread name?
---------- Post added at 07:39 PM ---------- Previous post was at 07:38 PM ----------
Yes it does. Label says it is treble
Click to expand...
Click to collapse
Read properly.. He asked if it supports non treble rom to which @Faizauthor12 said that it doesn't.. simple as that
ChetanLokhande said:
Oh my god. I've been waiting for this. Nethunter on zuk z2. Definitely gonna test it. By the way, why there is unofficial tag in thread name?
Click to expand...
Click to collapse
It is unofficial bcoz its not officially developed by the Offensive Security .I.e creators and maintainers of Kali net hunter.The kernel has been made with the help of the guide given by Dev team of Net hunters.
So yes the unofficial doesn't affect any feature or provide less than what other users get through the official kali net hunter build . Its one and the same.
Atharva Ambre[AT said:
;77018254]No unfortunately the chipset that is used by our device is Qualcomm atheros so it doesn't support internal WiFi chipset....it will definetly support all the external major Realtek or Atheros WiFi adapters which supports MONITOR MODE & PACKET INJECTION.
Click to expand...
Click to collapse
I have Alfa network realtek
zakaria12 said:
I have Alfa network realtek
Click to expand...
Click to collapse
Ya it will work just try googling the model number and check if it supports monitor mode or not...
Or simply flash the files in description and check whether it works or not and report us.
Cheers.
Run this command
airmon-ng
U will get the list of WiFi chipset (internal+ external adapter)
Usually the third name in the list is ur external WiFi adapter.
Then try enabling monitor mode
Suppose ur WiFi adapter has name wlan1
Type
airmon-ng start wlan1
airodump-ng wlan1mon
Den it will scan all the WiFi networks and dump it in the existing terminal.
Note: Commands to be entered in the Nethunter terminal under Kali option.... NOT normal android terminals.
Monitor mode not working. It shows error. Can someone tell step by step. I'm getting only p2p0 and wlan0 in airmon-ng
Atharva Ambre[AT said:
;77021207]Ya it will work just try googling the model number and check if it supports monitor mode or not...
Or simply flash the files in description and check whether it works or not and report us.
Cheers.
Run this command
airmon-ng
U will get the list of WiFi chipset (internal+ external adapter)
Usually the third name in the list is ur external WiFi adapter.
Then try enabling monitor mode
Suppose ur WiFi adapter has name wlan1
Type
airmon-ng start wlan1
airodump-ng wlan1mon
Den it will scan all the WiFi networks and dump it in the existing terminal.
Note: Commands to be entered in the Nethunter terminal under Kali option.... NOT normal android terminals.
Click to expand...
Click to collapse
Okkk thanks I will try
ChetanLokhande said:
Monitor mode not working. It shows error. Can someone tell step by step. I'm getting only p2p0 and wlan0 in airmon-ng
Click to expand...
Click to collapse
Check your otg cable if it works perfectly or not
Which adapter do you use?
Phone is getting heated while playing games like pugb. Performance wise there is so much lag.