Related
Does anyone have a link for the thread that discussed the correct way to wipe battery stats when upgrading to a new Rom? I remember it went something like drain dead, charge to full, drain dead again then charge to full and wipe stats. I can't remember the complete process. Thanks for the help.
Sent from my PC36100 using XDA App
I've seen a couple different threads on that here, one saying discharge fully then charge while powered off, and the other saying to do a full charge "conditioning cycle". I did the latter and it seems to have made a difference.
Here's what I did:
Charge the phone fully with it powered on
When fully charged, disconnect cable
After green LED goes off, power the phone off
When phone is fully powered off, reconnect cable, amber charging light should be on
When LED goes green, disconnect cable
Repeat previous two steps 10 times
After 10th cycle, boot into recovery and wipe battery stats.
I am using Amon Ra recovery which has the wipe battery stats option under the Wipe option. I never did this when I had Clockwork recovery installed, so I don't know if the option is in the same place.
Being an electrical engineer, I find this business of battery conditioning interesting, along with the Ni-Cd "memory" vs. Li-Ion "no memory" issue. If anyone has found a decent physics-based explanation as to why these things do or do not have any basis in fact, I'd appreciate a link. Yes, I'm too lazy to Google it at the moment.
Hmm, I may have to look into this again. I charged my phone all night (powered off) and unplugged it this morning. I did nothing with it this morning but turn it on and look at it, then put it in standby (quick press of power button). It lost 16% of charge in less than 2 hours!
I'm running BS1.2 with the Baked1 (low voltage/best battery) kernel.
Damn, just installed System Panel and found that my CPU is at 100% constantly!
I'm trying this now. The longest I've pushed my battery was 22 hours... and that was with 39 minutes of screen on time, lol. In standby almost the entire 22 hours....
Ok, I believe my issue was related to a camcorder problem, my CPU usage has dropped back to normal levels after fixing that separate problem. After my battery recharges fully I will see what happens with the charge.
the other methods to do "calibrate your battery" (which isnt really calibrating the battery but the battery stats of the phone so it can accuratly judge when it stops and starts charging)
1) charge the phone to full
2) unplug and use phone till it shuts off from no battery (do not plug in until it shuts off)
3) charge phone to full again with out unplugging till 100% (check under about phone > battery it shoudl say full charge there)
this should reset the battery stats.
the last method is one from HTC
1)Charge the phone for 8 hours uninterupted with power on
2) turn off the phone and charge for an additional hour
3) turn ont he phone unplug it and let it sit for 2 minutes then plug it in for an additional hour.
all 3 methods listed should help. I personally dont like the x10 method because it has the potential and basically over charges the battery to make sure it is acctually at a full charge. It is much faster then the other 2 methods though so to each there own.
Dont waste your time on...
plug/unplug 10 times. It really doesn't recal the battery.
the unplug/plug 10 times.
1. Phone on...charge until green light comes on. Immediately unplug and turn phone off.
2. Plug phone back in until green light comes on again. Immediately boot into Recovery and wipe battery stats.
3. Use the phone on battery until dies.
4. recharge phone to 100%
You are good to go!
If I tether during the day (5+ hours) a lot, is it bad on my battery? Isn't that like a constant charge or does once the LED turn green it stops trying to charge?
Thanks.
fldash said:
If I tether during the day (5+ hours) a lot, is it bad on my battery? Isn't that like a constant charge or does once the LED turn green it stops trying to charge?
Thanks.
Click to expand...
Click to collapse
the evo doesnt do a trickle charge so when the light turns green it stops, this is why you will almost always drop 1-5% battery rather quickly.
Are you sure? My light has been green for a while, and my phone battery status says 'Full'.
fldash said:
Are you sure? My light has been green for a while, and my phone battery status says 'Full'.
Click to expand...
Click to collapse
There's a lot of confusion over how the battery / charging circuit works and how it reports. My advice is to just charge until it's green and full, then unplug it. If you leave it plugged in all night, unplug it for 10 mins in the morning, then plug it back in to top off.
That doesn't really help me SilverZero, my question is only if leaving it tethered (which means connected to USB) is bad for my battery.
Well on mine i would check it every once in awhile and i would see that once it get downs to under 90% that it would charge again till it recognized that it was full again. So based on that i dont think you should have to worry about it. It seems to only draw the charge when needed. I also leave mine plugged in alot when im home so its good to go when i leave and havent noticed a loss of battery life at all.
You guys don't want the charger to trickle charge. Li-Ion does not accept overcharge, even 0.01C (15 mA on the stock Evo battery) will cause it to vent and probably combust.
So does "calibrating the battery" calibrate the phone or the actual battery?
I ask because I have 3 spare batteries, wondering if I have to do this for each of them??? They are all standard size, one of them OEM
Hi all,
I am puzzled by my problem. I am using Virtuous 2.7 + King's BFS kernel #4.
My phone battery will drop quickly from 100% to 92% right after unplugged from the power cord. By quickly, I meant I did not use the phone, killed all tasks, and battery will drop to 92% literally in minutes.
Bump charging, wiping battery stats, wiping dalvik cache, killing all tasks are not helping at all. I don't have SetCPU, but someone in the forum mentioned they have SetCPU, and it is not helping either.
Is anyone having this problem? Does anyone have any idea on how to solve this?
Please help.
Thank you!!!
chillmeow said:
Hi all,
I am puzzled by my problem. I am using Virtuous 2.7 + King's BFS kernel #4.
My phone battery will drop quickly from 100% to 92% right after unplugged from the power cord. By quickly, I meant I did not use the phone, killed all tasks, and battery will drop to 92% literally in minutes.
Bump charging, wiping battery stats, wiping dalvik cache, killing all tasks are not helping at all. I don't have SetCPU, but someone in the forum mentioned they have SetCPU, and it is not helping either.
Is anyone having this problem? Does anyone have any idea on how to solve this?
Please help.
Thank you!!!
Click to expand...
Click to collapse
I spoke to RMK as well as others about this in IRC, doesn't look like anything we can do, deep in the HTC code I guess.
I have the same issue using SkyRaider 3.1. Battery is 100% then after 5-10 minutes drops down to low 90s. It bothered me at first but after several days of moderate to heavy use and still having almost 50% battery left at the end of the day, I just figured it was some kind of bug when reading the battery level at the beginning. How is your battery life overall? If it's like mine, then i wouldn't worry too much about it as long as it's lasting longer. I'm using the 1750mAh battery from Sedio.
I was having the exact same problems until I went back to stock everything and bump charged. Took the OTA for 2.2, rooted, custom recovery, bump charged, wiped stats and cache and now I'm good to go. I usually dont think crap like this works but it made a huge difference in battery life and stopped the 100-90% problems I was having.
KB
I found this on EVO forum, but I don't know how his solution works. I personally don't think this would be the solution.
http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=704272
I am using the 1500 mAh battery.
My battery life is uptime around 24 hours and awake time around 6-9 hours depending on usage.
so you're not having the issue anymore, after going back to stock (non rooted) with the official OTA 2.2?
KB Smoka said:
I was having the exact same problems until I went back to stock everything and bump charged. Took the OTA for 2.2, rooted, custom recovery, bump charged, wiped stats and cache and now I'm good to go. I usually dont think crap like this works but it made a huge difference in battery life and stopped the 100-90% problems I was having.
KB
Click to expand...
Click to collapse
KB Smoka, so you don't have this problem anymore?
Do you think format the phone and wipe all the data will help?
Have anyone tried formating the phone?
I've searched and found that the cause is the phone saying the battery is charged fully when its not basically so to fix this after it goes to 100% while the phone is one then u should turn it off and let it charge fully from there
Sent from my ADR6300 using XDA App
superchilpil said:
I've searched and found that the cause is the phone saying the battery is charged fully when its not basically so to fix this after it goes to 100% while the phone is one then u should turn it off and let it charge fully from there
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I did bump charge this phone, but it still drops like crazy.
I'll try this out tonight.
Thanks!
Is this a once time fix thing or do you have to do it every time you charge?
bump charging 4 or 5 times in a row (basically bump as many times as you need to to get it to where the light turns green withing a minute of 2 or plugging it in again) and then wiping battery stats solved this for me... kinda.. i still have to bump twice, but after that it'll stay at 100 for a good while and work it's way down normally, no jumping 10% down..
superchilpil said:
I've searched and found that the cause is the phone saying the battery is charged fully when its not basically so to fix this after it goes to 100% while the phone is one then u should turn it off and let it charge fully from there
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
That is bump charging. Something htc is unable or unwilling to fix.
The issue has been known for a while and you have to 'bump charge' every time to avoid the 5-10% drop.
Here's their response about fixing the "bump charge".
"Dear **********,
I understand you would like to know if an update has be released to help get a full charge on your battery without having to bump charge it. At this time we have no information about any updates being released to help resolve this issue on your device. If an update is released for your device you will receive a notification on your device that an update is available.
To send a reply to this message or let me know I have successfully answered your question log in to our ContactUs site using your email address and your ticket number ************.
Sincerely,
Victor
HTC"
melophat said:
bump charging 4 or 5 times in a row (basically bump as many times as you need to to get it to where the light turns green withing a minute of 2 or plugging it in again) and then wiping battery stats solved this for me... kinda.. i still have to bump twice, but after that it'll stay at 100 for a good while and work it's way down normally, no jumping 10% down..
Click to expand...
Click to collapse
Do you bump charge every single time you charge right now? It's pain in the butt if I have to bump charge everyday.
Yup every day. 4 or 5 times is way overkill though. Just charge phone until green, turn off (don't need to unplug), wait until it turns green then do the plug/unplug one more time.
ufvj217 said:
so you're not having the issue anymore, after going back to stock (non rooted) with the official OTA 2.2?
Click to expand...
Click to collapse
Went to stock (official OTA), rooted, custom recovery, bump charged, reset stats and cache and I'm good now.
I charged it to "full" while it was powered on. Once the light turned green I turned the phone off, charged again until the light turned green. Took about 25 minutes. Powered up in recovery wiped battery and cache and now I'm good. The key is after doing all this you have to let the phone completely die.
If you're wiping your battery stats after a bump charge, you will have this problem every time you don't bump charge.
If you wipe your battery stats after it goes green without a bump charge, you won't have this problem.
This is because the software thinks the bump charged battery levels equal 100% charge. A bump charge adds approximately 10 percent of charge.
Formatting your phone or any software changes won't actually do anything other than wipe your battery stats while your phone is not at bump charge levels.
vantagejuan said:
If you're wiping your battery stats after a bump charge, you will have this problem every time you don't bump charge.
If you wipe your battery stats after it goes green without a bump charge, you won't have this problem.
This is because the software thinks the bump charged battery levels equal 100% charge. A bump charge adds approximately 10 percent of charge.
Formatting your phone or any software changes won't actually do anything other than wipe your battery stats while your phone is not at bump charge levels.
Click to expand...
Click to collapse
I'll try this instead! I don't want to bump charge everyday! It's too troublesome.
chillmeow said:
Hi all,
I am puzzled by my problem. I am using Virtuous 2.7 + King's BFS kernel #4.
My phone battery will drop quickly from 100% to 92% right after unplugged from the power cord. By quickly, I meant I did not use the phone, killed all tasks, and battery will drop to 92% literally in minutes.
Bump charging, wiping battery stats, wiping dalvik cache, killing all tasks are not helping at all. I don't have SetCPU, but someone in the forum mentioned they have SetCPU, and it is not helping either.
Is anyone having this problem? Does anyone have any idea on how to solve this?
Please help.
Thank you!!!
Click to expand...
Click to collapse
The reason this happens is because the battery gets charged fully to 100%, and then is allowed to slowly drain back to 90% (or so) before it's charged back to 100% again. This is how Lithium batteries are charged.
Try this: charge the battery to 100%, and immediately disconnect it after it's full. Notice how the battery doesn't drop to the low 90's immediately.
The reason "bump charging" appears to work is because there is no drain on the battery, since the phone is off. It goes to 100% and stops.
There's nothing we can do code-wise to fix this; it's just how the battery technology works. Keeping it fully charged at 100% while on would damage the charging capacity of our phones.
Btw.. wrong forum.
Solutions in search of a problem
Let me preface this by saying that I’m not an electrical engineer, or any sort of expert on phone hardware, but I think a couple issues are being confused. I’ve seen many posts about this battery “problem” here and elsewhere and an important point is being missed. People are confusing what the battery is actually doing with what the phone SAYS the battery is doing. They are NOT the same thing. The battery is a physical device and it will do what it’s going to do.
Battery life is a function of battery quality, initial state of charge, and demand. If you want the battery to last longer, look at ways of reducing demand. What applications are in use? How long is the screen on? What brightness level? Overclocking and undervolting settings? All these will affect ACTUAL battery life.
At lot of the “solutions” discussed have nothing to do with conserving energy use, but have everything to do with messing with how the phone REPORTS the state of charge. A good example is the issue of the initial drop reported by many users during the first few minutes after unplugging the charger. I see this on my own phone. If the phone is “taught” that 100% charge is when it is totally crammed with juice and plugged in as well, it’s not surprising that there is a good bit of voltage drop (+/- 10%?) right after unplugging. Does this mean there is a problem? NO! It’s just the battery doing what batteries do. A lot of the suggestions about wiping battery stats and such have nothing to do with saving energy. They are ways of fiddling with how the phone REPORTS its condition under various circumstances.
My advice: if you are happy with how your battery lasts, over the course of a day or so, then learn to relax, crack open a cold brew, and revel in just what a great phone the Incredible is. If your battery isn’t lasting as long as you need it to, then look at ways to save power or get a larger capacity battery. Tweaking the battery meter function is simply a feel-good exercise and won’t get you any actual improved performance. END OF RANT.
I can confirm that my gf's phone and my good buddies phone(both were never rooted) have never had a problem with the phone charging up slow first off(both phones charge about 1% per minute). And since they accepted the OTA, have not had the problem of charging to 100% and quickly jumping down to 90%. For instance, the other day my buddy charged his phone while on to 100%, played a game for about 2 minutes and closed it, battery was at 99%. Now I have tried and continually try every possible solution to my battery dying quick and charging slow, but am realizing that this must just be the cost of customizing my phone to my liking. And at least for the moment, a stock 2.2 DINC is just not an option for me.
larsrya8 said:
The reason this happens is because the battery gets charged fully to 100%, and then is allowed to slowly drain back to 90% (or so) before it's charged back to 100% again. This is how Lithium batteries are charged.
Try this: charge the battery to 100%, and immediately disconnect it after it's full. Notice how the battery doesn't drop to the low 90's immediately.
The reason "bump charging" appears to work is because there is no drain on the battery, since the phone is off. It goes to 100% and stops.
There's nothing we can do code-wise to fix this; it's just how the battery technology works. Keeping it fully charged at 100% while on would damage the charging capacity of our phones.
Btw.. wrong forum.
Click to expand...
Click to collapse
Sorry that I posted in the wrong forum. I thought this is related to the kernel or ROM I am using (Which is development right????).
Not to question your knowledge about the "battery technology", but why is it only happening to certain people? Nowadays most device are using Li-ion battery, why this phenomenon do not occur to all devices?
So, I'm on my Evo today, playing a game (Air Strike). My battery is at 93% when I picked the phone up to play, and the phone is plugged in. Suddenly, with no warning what-so-ever, my phone shuts off. Of course a mini-freak out and many "wtf's" ensue. No warning, no signs, even the led went off. I pulled the battery, put it back, then plugged the phone in again. After that it gave me the blinking light indicating the battery was too low to turn on. After a few minutes charging she came back on and battery was at 5%.
How the hell does a battery go from 93% to 0% in less than 5 minutes, and give no warning at all?? Anybody else ever have this problem?
Wow I've have never heard or that happening before. Maybe a glitch in the battery stash? Did it take awhile to charge up to 100%? Can you reproduce the issue again?
Sent from my EVO (CM 6.1.1) using XDA App
I had this problem with my older phone once. The battery itself may have a problem or your phone is not getting charged properly.
Try These :
1) Try charging the phone overnite from the Wall charger (Not through USB of your computer)
2) If the above does not work, and you have access to another evo battery, then try using that.(try using a friends battery and charger for a day. ) (Ofcourse needless to say the charger and battery must be for Evoonly )
In my case, my phone started working fine again after getting my battery & charger replaced.
Probably shouldn't worry about it too much just yet. Could be something as simple as your battery meter was mis-calibrated. The meter itself is software so it can easily be wrong/off. If it continues you may have a bad battery.
Sounds to me like something is wrong. Did you just get the phone or have you had it?
Idk... The phone had been plugged in for most of the day (hadn't gone anywhere. Lazy day lol) And like I said, the led went completely out as well.
Haven't had the problem again, so we'll see I guess....
Mark_Hardware said:
Idk... The phone had been plugged in for most of the day (hadn't gone anywhere. Lazy day lol) And like I said, the led went completely out as well.
Haven't had the problem again, so we'll see I guess....
Click to expand...
Click to collapse
I've seen some posts about the Evo battery shutting off the charge when its being used. Were you using your Evo while it was charging?
If the battery doesn't seem to be giving you percentages that are accurate, you might want to recalibrate your battery.
Common misconceptions sticky (Evo Q&A) said:
Battery recalibration (Thanks to Cyanogen for this and to fachadick for bringing it to my attention).
If you're experiencing higher than normal battery drain, try the following:
1. Charge the phone to full battery; let it keep charging until the battery says it is fully charged. Do not just wait until the light is green, it isn't always fully charged, causing a lot of inaccuracies. (You can check by going to: Settings -> About Phone -> Status -> Battery Level = Full.)
2. Boot to recovery and wipe battery stats.
(To have the most accurate of battery stats, reboot the phone immediately after wiping the battery stats and wait for your ROM to boot completely to the desktop. Once your entire boot is done and you have full access to the phone, go ahead and pull the charger and continue.)
3. Do not charge the phone until after draining the battery completely, resulting in it automatically shutting off. Take out the battery, and keep trying to turn on your phone until it will not turn back on at all.
4. Recharge the phone completely and then use as you normally would.
This is a method that has been proven to work, I am sure there are other ways. My battery lasts longer after doing this and the reading is much more accurate. It might be advisable to do this after every ROM install if you want the most battery life and most accurate battery reading by the phone's software.
Click to expand...
Click to collapse
Hey what's up. I got this G2 with the latest cm7, which is build number 21 and the battery life is horrible. Like 8 hours with an hour of the display being on. I'm coming from the Epic which had pretty good battery life once calibrated.
So what's the proper way of calibrating the G2? I am using the stock kernel that comes with the Cm7 rom right now but I did try the pershoot kernel couple times and underclocked it but it still didn't help. I think all that kernel flashing messed up my battery life. So any ideas? Thanks!
Sent from my HTC Vision using Tapatalk
saywhat4118 said:
Hey what's up. I got this G2 with the latest cm7, which is build number 21 and the battery life is horrible. Like 8 hours with an hour of the display being on. I'm coming from the Epic which had pretty good battery life once calibrated.
So what's the proper way of calibrating the G2? I am using the stock kernel that comes with the Cm7 rom right now but I did try the pershoot kernel couple times and underclocked it but it still didn't help. I think all that kernel flashing messed up my battery life. So any ideas? Thanks!
Sent from my HTC Vision using Tapatalk
Click to expand...
Click to collapse
Charge your phone all the way to 100% (not just until the LED turns green, which is around 90%), unplug and boot into recovery, wipe battery stats, boot back into Android and use your phone until the battery drains and your phone shuts off. Keep trying to power up until it won't any more.
Now, plug your phone in (into the wall, not a computer) and charge until full *without* turning it on. Remember, the LED turns green around 90% so you'll need to leave it another few hours after the LED changes. Once you're full, unplug and boot into Android and again use it until the battery is fully drained and you can't power up anymore and you're good to go.
Remember, after wiping stats, during the draining process *do not* plug it in to the charger or your computer as thiss will mess up the calibration.
Its a pain, and takes a day or so, but its worth it. To speed up the draining process, do some process intensive things (video watching, game playing, etc.)
Sent from my T-Mobile G2 using XDA App
OriginalGabriel said:
Charge your phone all the way to 100% (not just until the LED turns green, which is around 90%), unplug and boot into recovery, wipe battery stats, boot back into Android and use your phone until the battery drains and your phone shuts off. Keep trying to power up until it won't any more.
Now, plug your phone in (into the wall, not a computer) and charge until full *without* turning it on. Remember, the LED turns green around 90% so you'll need to leave it another few hours after the LED changes. Once you're full, unplug and boot into Android and again use it until the battery is fully drained and you can't power up anymore and you're good to go.
Remember, after wiping stats, during the draining process *do not* plug it in to the charger or your computer as thiss will mess up the calibration.
Its a pain, and takes a day or so, but its worth it. To speed up the draining process, do some process intensive things (video watching, game playing, etc.)
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
Thanks for the tip. Now I have been doing some reading and saw some people recommended charging the phone while it is on when it is fully discharged the first time. You recommend while its off? Does it make a huge difference?
saywhat4118 said:
Thanks for the tip. Now I have been doing some reading and saw some people recommended charging the phone while it is on when it is fully discharged the first time. You recommend while its off? Does it make a huge difference?
Click to expand...
Click to collapse
I don't think it would make that big of a difference; if you think about it though, you're dealing with the battery and battery only if the system is turned off.
Sent from my T-Mobile G2 using XDA App
True we are dealing with the battery but when we wipe the battery stats I think it only wipes the battery information the phone had in its system. So if we wiped the stats when it is full then let it discharge till completely empty, im assuming, you would have to charge it while its on so the phone can now learn what the battery level is and when its full and its capacity. I'm just guessing I could be wrong though. I'm just going to try both and see what happens.
Sent from my HTC Vision using Tapatalk
OriginalGabriel said:
Charge your phone all the way to 100% (not just until the LED turns green, which is around 90%), unplug and boot into recovery, wipe battery stats, boot back into Android and use your phone until the battery drains and your phone shuts off. Keep trying to power up until it won't any more.
Now, plug your phone in (into the wall, not a computer) and charge until full *without* turning it on. Remember, the LED turns green around 90% so you'll need to leave it another few hours after the LED changes. Once you're full, unplug and boot into Android and again use it until the battery is fully drained and you can't power up anymore and you're good to go.
Remember, after wiping stats, during the draining process *do not* plug it in to the charger or your computer as thiss will mess up the calibration.
Its a pain, and takes a day or so, but its worth it. To speed up the draining process, do some process intensive things (video watching, game playing, etc.)
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
I have used this method to calibrate the battery and can say that it does have a pretty big impact on battery life. +/- 20% in my case. I also find that I need to re-calibrate roughly once every month or so.
To be clear, there is not such thing as "calibrating the battery", you are calibrating the battery meter (volt meter) on the phone. Maybe its just a semantic distinction, and that is what the OP and subsequent replies are talking about. But many people get this confused, due to the old process of "conditioning" NiCad batteries, which is not applicable to modern cell phone (Li ion) batteries.
In my understanging, you aren't going to increase battery life by doing any of the above, but only making the battery meter more correctly read how much power is left. For instance, if the meter is not properly calibrated, it may read lower than it should. So people think they are increasing their battery life.
I would discourage from discharging the battery to empty. Over discharge of Li ion batteries can possibly (not often, but in a small percentage of cases) prevent the battery from taking a charge. There is a safety circuit which is supposed to prevent over discharge, but it does not always work. Therefore, Li ion batteries should not be discharged lower then 20% whenever possible. Most of us do it from time to time on accident, but there is not reason to do it intentionally. Charge the battery to 100%, drain to 20%, and repeat a couple times. This will get your battery meter plenty accurate. Draining it to empty does not really gain you anything (the battery meter is not that accurate in the best of circumstances, anyway), and can harm the battery.
http://batteryuniversity.com/learn/article/do_and_dont_battery_table
Flashing a new ROM resets the battery meter. So until its properly calibrated, it will give you junk readings. This is one reason why people often jump the gun and think that a custom ROM is getting them poor battery life. Calibrate the meter, and use the ROM for a couple days, then you should get a real indication of what the battery life is like on that ROM.
redpoint73 said:
I would discourage from discharging the battery to empty. Over discharge of Li ion batteries can possibly (not often, but in a small percentage of cases) prevent the battery from taking a charge. There is a safety circuit which is supposed to prevent over discharge, but it does not always work. Therefore, Li ion batteries should not be discharged lower then 20% whenever possible. Most of us do it from time to time on accident, but there is not reason to do it intentionally. Charge the battery to 100%, drain to 20%, and repeat a couple times. This will get your battery meter plenty accurate. Draining it to empty does not really gain you anything (the battery meter is not that accurate in the best of circumstances, anyway), and can harm the battery.
Click to expand...
Click to collapse
I was about to post this. Letting a LiIon discharge all the way is more harmful to the battery than recharging it mid drain cycle.
I'm having a bit of battery issues, I haven't flashed a ROM or calibrated my battery meter. So I charge my phone to full while still on, unplug it and drain it until it turns off (NOT until the battery is completely drained, which could potentially damage the battery), plug it up and let it charge while off, and I should be calibrated?
Do you need to have root to be able to reset battery stats?
Sent from my T-Mobile G2 using XDA App
So, I bought another battery. Will this sort it?
Also, what's the usual procedure?
Should I charge the battery to full in the phone (turned off) then boot, set up, then charge again and reset battery stats?
The problem is that the battery control chip doesn't take into account that the battery ages.
Resetting battery stats or charging while turned off will only clear the stats you see in the settings menu. This guide will make your battery drain to 0% again: http://forum.xda-developers.com/showthread.php?t=1534892
I don't know what a new battery will do though.
I gathered that, but as the phone is going to a new user (my stepson) we got him a new battery anyway
I just wondered what the correct procedure is. I know you need to do a first charge with a new battery, as with a new phone, however, this phone obviously has a working ROM already on it.
So, the phone is charging now, switched off. Should I turn it on, use a little, then use the battery calibration app to delete the stats and then drain to 0%?
Kryten2k35 said:
I know you need to do a first charge with a new battery, as with a new phone
Click to expand...
Click to collapse
Well, that assumption is probably inherited from the NiHM batteries in the past, because it's not needed with Li-Ion batteries. In fact charging to 80% is better than charging to 100% and keeping it plugged in.
You can read more about it here and here.
Kryten2k35 said:
So, the phone is charging now, switched off. Should I turn it on, use a little, then use the battery calibration app to delete the stats and then drain to 0%?
Click to expand...
Click to collapse
Just charge it and use it for a full cycle. If it shuts down at 15%, you can try the battery calibration from the thread I mentioned above. If it doesn't, you're battery capacity is the same as the one the battery chip has calculated, which is good.
So, why does the first charge take so long?
This thing is still charging and it's been on the charger for 3 hours, whereas usually it'd be charged fully by now.
Been like that for every Li-Ion battery I've ever had (including my S3, took around 6 hours to charge, usually takes 3).
EDIT:
Just to clarify, I don't intend on leaving it past the green light. As soon as it says it's full I'll be taking it off charge and not trying ot overcharge it. But I still have the orange charging light after 3-4 hours.
To be honest, I don't know. Maybe it's a safety to prevent overcharging. Coincidentally, I've got exactly the same issue now. I asked about it in the calibration thread. I suppose it's normal, but I'm not sure about that.
Kryten2k35 said:
So, why does the first charge take so long?
This thing is still charging and it's been on the charger for 3 hours, whereas usually it'd be charged fully by now.
Been like that for every Li-Ion battery I've ever had (including my S3, took around 6 hours to charge, usually takes 3).
EDIT:
Just to clarify, I don't intend on leaving it past the green light. As soon as it says it's full I'll be taking it off charge and not trying ot overcharge it. But I still have the orange charging light after 3-4 hours.
Click to expand...
Click to collapse
my battery took just over 6 hours to charge the other day from completly dead
Sent from my HTC Desire