EDIT: There was an error in the file I uploaded in /ect/motorola. The error has now been fixed. You should now get a working signal when following the instructions. Please re download the "DEFY2BRAVO.zip". It has been updated.
Here is a list of what to do in order to get ROMs like CM7 and MIUI for the Defy to work on the Bravo. This method works PERFECT.
Before you start:
Download my "DEFY2BRAVO.zip"
Get Winrar
Get Notepad++
1) Open the Defy ROM you want to get working on the Bravo
2) Delete "boot.img", "devtree.img", and "logo.img"
3) Go to \META-INF\com\google\android\
4) Open file "updater-script" in notepad++
5) Scroll to the bottom and delete these 9 lines:
Code:
assert(package_extract_file("logo.img", "/tmp/logo.img"),
write_raw_image("/tmp/logo.img", "/dev/block/mmcblk1p10"),
delete("/tmp/logo.img"));
assert(package_extract_file("boot.img", "/tmp/boot.img"),
write_raw_image("/tmp/boot.img", "/dev/block/mmcblk1p15"),
delete("/tmp/boot.img"));
assert(package_extract_file("devtree.img", "/tmp/devtree.img"),
write_raw_image("/tmp/devtree.img", "/dev/block/mmcblk1p12"),
delete("/tmp/devtree.img"));
6) Open my "DEFY2BRAVO.zip" click and drag everything in \system\etc\ in my "DEFY2BRAVO.zip" into \system\etc of the ROM you are porting
7) Open my "DEFY2BRAVO.zip" click and drag everything in \system\lib in my "DEFY2BRAVO.zip" into \system\lib of the ROM you are porting
Done. You can flash this and everything up to the camcorder will work perfect. We still need the actual camera to work, so please help join in on the effort.
Enjoy whatever you just ported!
Excellent dude, I had it, but I'll copy everything so I can make ports also.
Do you have video camera working doing these steps?
When I did it a couldnt get video camera.
josuearisty said:
excellent dude, i had it, but i'll copy everything so i can make ports also.
do you have video camera working doing these steps?
when i did it a couldnt get video camera.
Click to expand...
Click to collapse
i confirm the camcorder working perfectly !!! Waiting for camera !!
Nice, gonna try it later.
I have a question for you BravoMotorola.
I'd like to make a custom rom from the system dump from gingerblur, so that we can install it as a normal rom, not as a restore backup.
Thanks.
We can also use rdannar's sbf when flashing these roms
Sent from my gingerbravo
And Walter released his ms2ginger 2.0. Unfortunately we can't port it beside it's a backup. I tried to do it but I got stuck on boot logo everytime
Sent from my gingerbravo
marquae11 said:
And Walter released his ms2ginger 2.0. Unfortunately we can't port it beside it's a backup. I tried to do it but I got stuck on boot logo everytime
Sent from my gingerbravo
Click to expand...
Click to collapse
No, we cant do it this way, I think its not the same.
I'd like to convert this backup to a normal rom, but dont know how.
I hope that this version is not based on a kernel 2.3, because then we are not going to port it anymore, unless a code master come to us.
marquae11 said:
We can also use rdannar's sbf when flashing these roms
Sent from my gingerbravo
Click to expand...
Click to collapse
That fix is specific to MIUI and also doesn't come with a camera fix
Related
r1 released - view topic.
Please continue any discussion in that topic!
P
Gonna download now, great to see you jumping onto the Tab, loved your work on the hero
Good Job , will upgrade to the kernal soon and the rom..
The date is the 24th though lol..
And could you maybe put this in the next rom if not already?
http://forum.xda-developers.com/showthread.php?t=922692
It is much improved GPS for the Tab
Cheers
Typo.
Will check that thread out. I suspect the files are already in this release.
P
First happy customer on the MoDaCo thread. Sweet!
P
Just flashed your kernel and rom Paul.
Cheers
So does this have CWM embedded in the kernel like Koush's version that was posted on here (and which caused quite a few issues)? I'm just wondering how easy it would be to switch to other kernels/roms later if running with this rom.
paulobrien said:
This is a very very very very very early Alpha release of my MoDaCo Custom ROM for the Samsung Galaxy Tab.
Here's what you need to know. READ ALL OF THIS SECTION.
It's based on the XWJMF release.
It's tested on my Euro tab only.
In order to use, you must have installed my EXT4 Kernel (version r2) or above and completed the conversion to EXT4. The ROM does not include the kernel at this time.
The ROM must be installed via ClockworkMod recovery, which is automatically installed with the above kernel.
The ROM is optimised with the MCR build system.
The ROM is deodexed.
The ROM retains the stock Samsung certificates at this time, so a wipe should not be required.
The ROM has some Samsung crapware removed.
The ROM will grow rapidly in features from this point forward - this is the starting point!
Keyboard backlights, GPS, Gyros, Rotation etc. etc. - they all work.
Baseband XXJMA is the accompanying version for this ROM, but it *should* work with other basebands.
YOU INSTALL THIS ROM AT YOUR OWN RISK, make sure you take a backup with ClockworkMod first, and ensure you are familiar with using ODIN / Heimdall for recovery.
Feeling brave? Go ahead!
alpha1 DOWNLOAD (ROMraid Load Balancing) - MD5: 73bb262e1a01845ebf35e234f6e9a047
P
Click to expand...
Click to collapse
Hi modaco , for the ext4 coversion, we need only room for the system data ( < 1,5 GB ) or also for the data on the SD ?
E: Cant open /sdcard/p100-modacocustomrom-alpha1-unsigned.zip
(bad)
installation aborted
on tab&furious jme rom
I love this! It has been a somewhat lengthy and frustrating couple of months, but am loving the sight of people finally breaking through with beta ROM's. Premature no doubt, but the movement is on! Thanks paulobrien for bringing this out
Redownload or check MD5...
P
DeiphoneaAndroid said:
Hi modaco , for the ext4 coversion, we need only room for the system data ( < 1,5 GB ) or also for the data on the SD ?
Click to expand...
Click to collapse
Data + system...
P
paulobrien said:
Data + system...
P
Click to expand...
Click to collapse
Ok ... I think I need a new microSD
paulobrien said:
Redownload or check MD5...
P
Click to expand...
Click to collapse
im re-downloading, but how do i check the md5 sum
b0ricuaguerrero said:
im re-downloading, but how do i check the md5 sum
Click to expand...
Click to collapse
http://www.pc-tools.net/win32/md5sums/
good rom, fast.
needs market??
cheers
itje said:
good rom, fast.
needs market??
cheers
Click to expand...
Click to collapse
How do you mean?
Obviously it has Market and all the other usual stuff.
P
ritdaw said:
http://www.pc-tools.net/win32/md5sums/
Click to expand...
Click to collapse
thanks but a lil vague. where do i put this? in my folder were adb is located?
b0ricuaguerrero said:
thanks but a lil vague. where do i put this? in my folder were adb is located?
Click to expand...
Click to collapse
Download the zip, extract the exe file and drag the file you want to check the MD5 for. It should display back the same as the ones Paul posted.
as far as I tested the kernel / rom everything looks fine BUT
if I turn off the device and plug it into the USB port, it shows the battery symbol and then freezes. after pluggin off and do the 5 second reset, everything went up fine.... any ideas?
Well, I wanted to try this, I saw it in DEFY forums and as always I thought this could work for BRAVO too.
I tried and everything is working fine.
Im using now CM7 and ICS CM9 Quarx version with froyo kernel
I'll try later with GINGERBLUR!
Follow this steps:
http://forum.xda-developers.com/showthread.php?t=1364659
Any question Im here!
josuearisty said:
Well, I wanted to try this, I saw it in DEFY forums and always I thought this could work for BRAVO too.
I tried and everything is working fine.
Im using now CM7 and ICS CM9 Quarx version with froyo kernel
I'll try later with GINGERBLUR!
Follow this steps:
http://forum.xda-developers.com/showthread.php?t=1364659
Any question Im here!
Click to expand...
Click to collapse
I tried also with good results! CM7 + CM9 is a good combo - allows us to have camera working as well as the latest and greatest AOSP. It's amazing how similar the two devices are.
The trick is to correctly allocate the sizes of the 3 ext-3 fsimages based on personal use. 300 mb was way too small for me
This mod definitely has lots of quirks though...if you don't know what you're doing, it might not work.
After downloading files, I would suggest looking at this post: http://forum.xda-developers.com/showpost.php?p=21401063&postcount=249
So u have a working camera on Cm9 ::
Sent from my MB520 using XDA App
marquae11 said:
So u have a working camera on Cm9 ::
Sent from my MB520 using XDA App
Click to expand...
Click to collapse
no.
cm7 w/ camera is on 2ndint
cm9 w/o camera is on 2ndboot
if i want camera, i can simply boot into 2ndint. so then i don't have to keep reflashing cm7 if i want a working camera! it's very convenient
Oh I was very confused
Sent from my MB520 using XDA App
josuearisty said:
Well, I wanted to try this, I saw it in DEFY forums and as always I thought this could work for BRAVO too.
I tried and everything is working fine.
Im using now CM7 and ICS CM9 Quarx version with froyo kernel
I'll try later with GINGERBLUR!
Follow this steps:
http://forum.xda-developers.com/showthread.php?t=1364659
Any question Im here!
Click to expand...
Click to collapse
what is GINGERBLUR and froyo kernel???I am using CM7 now.Is there any way to make camera working on CM9 for bravo?????
---------- Post added at 11:03 PM ---------- Previous post was at 10:59 PM ----------
syllogyking said:
no.
cm7 w/ camera is on 2ndint
cm9 w/o camera is on 2ndboot
if i want camera, i can simply boot into 2ndint. so then i don't have to keep reflashing cm7 if i want a working camera! it's very convenient
Click to expand...
Click to collapse
Do you mean u boot into CM7 for working camera and boot into CM9 for other time & this is very convenient due to multi boot manager????.OR have u found any means by which u get working camera on CM9???
eternal.sumit said:
what is GINGERBLUR and froyo kernel???I am using CM7 now.Is there any way to make camera working on CM9 for bravo?????
---------- Post added at 11:03 PM ---------- Previous post was at 10:59 PM ----------
Do you mean u boot into CM7 for working camera and boot into CM9 for other time & this is very convenient due to multi boot manager????.OR have u found any means by which u get working camera on CM9???
Click to expand...
Click to collapse
I have a library replacement hack to get photo camera working, should be in the next thead down. I'd use the libraries from the latest nightly released earlier today, they're probably better since they were updated since last release.
josuearisty said:
Well, I wanted to try this, I saw it in DEFY forums and as always I thought this could work for BRAVO too.
I tried and everything is working fine.
Im using now CM7 and ICS CM9 Quarx version with froyo kernel
I'll try later with GINGERBLUR!
Follow this steps:
http://forum.xda-developers.com/showthread.php?t=1364659
Any question Im here!
Click to expand...
Click to collapse
please can you provide with detail step by step guide of how to do this.The link you provided as steps is quite confusing.I have full working quarx CM7 nightly edition of bravo as base ROM.I don't even see you tube video for this guide.It would be great aid to bravo users if you could possibly upload video on this at you tube.
eternal.sumit said:
please can you provide with detail step by step guide of how to do this.The link you provided as steps is quite confusing.I have full working quarx CM7 nightly edition of bravo as base ROM.I don't even see you tube video for this guide.It would be great aid to bravo users if you could possibly upload video on this at you tube.
Click to expand...
Click to collapse
If you are running alredy CM7 it will be very easy for you.
You can try Multiboot manager instead of doing it manually:
http://forum.xda-developers.com/showthread.php?t=1522329
It is very easy, anything Im going to be here to answer!
Probably naive...
I'm just getting back into the fun, and it's nice to see how things have progressed...wow.
Will multi-boot CM7/CM9 share app data?
EDIT: And I don't see the Play app in CM9?
sdrawkcab3 said:
I'm just getting back into the fun, and it's nice to see how things have progressed...wow.
Will multi-boot CM7/CM9 share app data?
EDIT: And I don't see the Play app in CM9?
Click to expand...
Click to collapse
Follow this thread and download gapps for ics maybe you skipped.
http://forum.xda-developers.com/showthread.php?t=1595898
You should access to your account in the rom so that everything updates itself.
josuearisty said:
If you are running alredy CM7 it will be very easy for you.
You can try Multiboot manager instead of doing it manually:
http://forum.xda-developers.com/showthread.php?t=1522329
It is very easy, anything Im going to be here to answer!
Click to expand...
Click to collapse
thanks a lot!!.I finally succeeded in multibooting CM7 & CM9.But when i flash CM7White Rabbit it doesn't boot at all.I think I made mistake while creating virtual image file.can u please help me succeed CM7White rabbit to boot flawlessly using multi boot.Also I need to install MIUIpikachu version via multiboot.please help me.
eternal.sumit said:
thanks a lot!!.I finally succeeded in multibooting CM7 & CM9.But when i flash CM7White Rabbit it doesn't boot at all.I think I made mistake while creating virtual image file.can u please help me succeed CM7White rabbit to boot flawlessly using multi boot.Also I need to install MIUIpikachu version via multiboot.please help me.
Click to expand...
Click to collapse
Please try it again.
I tried three roms at a time and worked fine for me.
CM7, CM9 and MIUI.
I will try this rom to see if there is a problem with me.
WR and Pikachu were originally made to be used with 2nd-boot, but that never worked with the Bravo. I've never tried them on multiboot. I don't normally use multi boot due to too much music on my sdcard. That, and I had problems with roms with bugs/glitches they didn't have when installed to the system.
Honestly, WR is buggy as hell. I'd release an update, but I can't get some of the tweaks to work right and there's no radio after installing the updated one. If you want an updated WR, the closest thing is my current nandroid...The only problem is its touch recovery and I've never once tried multi boot with touch recovery.
I suppose I could remove touch recovery up my nandroid later today. It has working Bravia(yes I tested before and after and I made a difference), updated beats audio, 30 step volume, cyanbread framework themeing, brews coffee, the miui explorer from Defy forum, custom framework animations, transparent status bar/notification drawer, walks your dog, and zepplinrox's scripts already ran and set up. It has everything WR had except Go Launcher and Miui apps.
Autocorrect is pissing me off. Miui was Louis, Mohican, and Minuit. And my thumb is sore now.
josuearisty said:
Follow this thread and download gapps for ics maybe you skipped.
http://forum.xda-developers.com/showthread.php?t=1595898
You should access to your account in the rom so that everything updates itself.
Click to expand...
Click to collapse
Thanks, got Gapps working! Now I can't seem to figure out root?
A little late, but superuser was broken on ICS multiboot. Its fixed on the 0417 release.
Has anyone else been having problems installing multiboot when CM9 is the primary nand rom? It installs, boots to 2nd-system, but nothing works except boot from nand. Selecting anything other than boot from nand gives me the multiboot error screen and I have to reboot. The same zip works perfectly fine with CM7.
skeevy420 said:
A little late, but superuser was broken on ICS multiboot. Its fixed on the 0417 release.
Has anyone else been having problems installing multiboot when CM9 is the primary nand rom? It installs, boots to 2nd-system, but nothing works except boot from nand. Selecting anything other than boot from nand gives me the multiboot error screen and I have to reboot. The same zip works perfectly fine with CM7.
Click to expand...
Click to collapse
I have never installed cm9 as a prinary rom, well I did it, but didnt install other roms.
ONE IDIOT QUESTION： two system will use more battery? Or there are any disadvantage to use two system?
769151238 said:
ONE IDIOT QUESTION： two system will use more battery? Or there are any disadvantage to use two system?
Click to expand...
Click to collapse
A system installed on the sdcard tends to use a bit more battery in my experience. That and the lost gigabyte of sd storage are the only disadvantages of using multiboot.
I will add that some roms have glitches when installed to the sdcard they normally wouldn't have as a nand install. Its a hit or miss when dealing with multiboot sd roms and glitches.
Does anyone have the original app file for Optimus G? I liked the camera when was on stock, but everything else was bad so I went custom rom.
running unofficial cm11 now: http://forum.xda-developers.com/showthread.php?t=2528556
anyone can help? thanks!
hope it will work.
mishteuse said:
hope it will work.
Click to expand...
Click to collapse
do i use the apk, or .odex? sorry not very experienced with this... thanks so much!!
edit: btw is this google stock camera? When I replaced this file with GoogleCamera.apk in system/app, fixed permission and rebooted, the camera is still Google stock. This is a surprise, because I couldn't get the camera working before. It would always fail to open with "gallery stop responding" error.
how install this camera?
Flashing i think, is a "zip".
realy? it works in CM11?
AdrianSC said:
Flashing i think, is a "zip".
Click to expand...
Click to collapse
Good evening from me and I want to ask ie if I put a another Rom as the cm11 and pass this file and i do install i will have the original camera e975 4.1.2jb ports? what about 4.4.2kk ports in camera we have any info or zip file?beacose it have better ports and the photos is more clean and pure...and one last question.... you have do it this in your phone? i mean the quality of camera is better that android camera in cm11???? beacose that camera is sucks and that is my biggest problem and it is the reason that i am not go in any custom rom yet........ty a lot and sry for all this questions.
AdrianSC said:
Flashing i think, is a "zip".
Click to expand...
Click to collapse
This zip doesn't have the usual scripts and path structure that comes with those who are supposed to be flashed from recovery.
I'm not stating anything "for" or "against", but are you sure this one is really supposed to be flashed "as is"?
enapah said:
This zip doesn't have the usual scripts and path structure that comes with those who are supposed to be flashed from recovery.
I'm not stating anything "for" or "against", but are you sure this one is really supposed to be flashed "as is"?
Click to expand...
Click to collapse
Guys, this is obviously NOT a flashable zip. Just unpack, and copy files over manually (both apk and odex). In KK, the path is /system/priv-app.
Where can I find the fotocamer astock LG Optimus G E975 for CM 12? Thank You.
HI,
im at the Point where I install the mimicry Rom from Andromadus.
But after I have choose the zip file with clockworkmodrecovery it installs...andromadus logo splashes shortly and then its done. when i reboot froya android 2.2 (where i downgraded to) is starting again with a fresh Setup...
I found this in the mimicry dev Forum:
http://forum.xda-developers.com/showthread.php?t=1893028&page=1
Quote:
Originally Posted by XAlexander_AlexanderX View Post
Well I tested it with 7zip and it said Data error in 'system\lib\libposteffect.so'. File is broken. I hope this helps!
I'll try replacing the file and see if that will push it through.
SUCCESS! Nyandroid boot is going!
Replace the file in the zip with the one from the link
For slightly more clear instructions, open the .zip with your decompression software of choice.
Go to 'system\lib\'
Replace libposteffect.so with
http://www.flinny.org/libposteffect.so
Now flash, and watch rainbows through space
Click to expand...
Click to collapse
Until the OP updates his post I'm hosting the fixed ROM Get Mimicry 1.5.0 vivow fixed right here
So for any of you who don't want to try all the unzipping and rezipping, this is for you
PLEASE NOTE!!
You'll also need GAPPS as it's not included. Aero's v13 Kernel is optional
Click to expand...
Click to collapse
all the links do not work anymore, so i cannot get either the .so file or the updated .zip. can anyone help me?
thanks alot
Boot to bootloader and write down everything from that screen here
demkantor said:
Boot to bootloader and write down everything from that screen here
Click to expand...
Click to collapse
okay I will.
meanwhile I installed the normal mimicry and not the ported one (mimicry vivow) and that one is working.
I think we do not need to fix ma problem anymore, as it might take too much time just for this.
case closed with the result ROM Port Andromadus Mimicry 1.5.0 (mimicry vivow) is not working anymore.
An OP might inform the creator to either fix or mark that ROM as broken?
regeards yromem
STOCK ANDROID NOUGAT [N] CAMERA FOR ALL CUSTOM ROM
How To Install
1. Download Zip file
2. Reboot into TWRP recovery
3. Flash Zip file
4. Reboot
5. Done Enjoy Stock Camera on any custom rom
I'd like to give credit to DevendraMilmile121 for the original port here.
Also credits to data365 for his mod here
I patched the apk to avoid the FC when com.motorola.frameworks.core.addon.jar is present.
No need to delete the com.motorola.*** .jar files from system/framework/
Download v6.0.54.1
Download v6.0.78.1
Enable Write to external sdcard:
ExtSD_Fix_rw-signed-v1.9b.zip
Thank you so much. Working fine on pure Nexus
Enviado desde mi Moto G4 mediante Tapatalk
Many thanks for this, working on resurrection remix 5.8.3 26/04 build without issue. how did you get around the FC problem, if I may ask?
Working fine on crDoid. Thank you so much!
echo92 said:
Many thanks for this, working on resurrection remix 5.8.3 26/04 build without issue. how did you get around the FC problem, if I may ask?
Click to expand...
Click to collapse
My understanding is that when /system/framework/com.motorola.frameworks.core.addon.jar is present
com.motorola.camera.device.framework.CameraMotExt.<clinit> fails to find class "android.hardware.Camera$EnvDetectCallback"
So I emptied out the static method (<clinit>) and initialised a couple of variables outside.
I used DexPatcher to modify it.
Then the behaviour is the same as if /system/framework/com.motorola.frameworks.core.addon.jar wasn't there.
Clearly this is a workaround not a fix. It would be nice to know why it can't find the class and fix it so that "CameraMot" is supported (I guess this is some hardware optimisation)
Would you please share another link beside afh because i get some problem with download from afh
Thank you for this. After I deleted those files, an FC message saying "Motorola Settings" has stopped would greet me at every boot. This'll take care of that.
I don't believe it has anything to do with video recording though, does it?
baunthiyal said:
Thank you for this. After I deleted those files, an FC message saying "Motorola Settings" has stopped would greet me at every boot. This'll take care of that.
I don't believe it has anything to do with video recording though, does it?
Click to expand...
Click to collapse
I didn't see issues with video recording either with the patched Moto camera and deleting the .jar files, or using this Moto camera as is. The Motorola settings seems to pop up whenever, but dismissing it doesn't seem to cause issues with the camera app or the system itself - curious!
dedik46 said:
Would you please share another link beside afh because i get some problem with download from afh
Click to expand...
Click to collapse
https://ufile.io/y6fm5
How to change the storage location to external SD card.? It is not accessible through settings.
Thanks in advance.
ramansehra said:
How to change the storage location to external SD card.? It is not accessible through settings.
Thanks in advance.
Click to expand...
Click to collapse
https://forum.xda-developers.com/mo...-motorala-camera-write-to-externalsd-t3498573
gabriwinter said:
My understanding is that when /system/framework/com.motorola.frameworks.core.addon.jar is present
com.motorola.camera.device.framework.CameraMotExt.<clinit> fails to find class "android.hardware.Camera$EnvDetectCallback"
So I emptied out the static method (<clinit>) and initialised a couple of variables outside.
I used DexPatcher to modify it.
Then the behaviour is the same as if /system/framework/com.motorola.frameworks.core.addon.jar wasn't there.
Clearly this is a workaround not a fix. It would be nice to know why it can't find the class and fix it so that "CameraMot" is supported (I guess this is some hardware optimisation)
Click to expand...
Click to collapse
Yes look forward to [emoji4]
gabriwinter said:
STOCK ANDROID NOUGAT [N] CAMERA FOR ALL CUSTOM ROM
How To Install
1. Download Zip file
2. Reboot into TWRP recovery
3. Flash Zip file
4. Reboot
5.Done Enjoy Stock Camera on any custom rom
Download
All credits to DevendraMilmile121 for the original port here.
I just patched to avoid the FC when com.motorola.frameworks.core.addon.jar is present.
No need to delete the com.motorola.*** .jar files from system/framework/
Click to expand...
Click to collapse
Thx!!!!!!!!!!!!!!!!!!
Can we auto-update via Playstore to newer version?
Is quality as good as it's on stock roM? thx!!!!!!
optionalmgrr.la said:
Thx!!!!!!!!!!!!!!!!!!
Can we auto-update via Playstore to newer version?
Is quality as good as it's on stock roM? thx!!!!!!
Click to expand...
Click to collapse
It can't be updated or it would loose the patch.
Quality wise I would say it's close to stock but probably a little below (can someone confirm this?)
For now I think this is the best we can get for non stock roms.
If someone wants to step up and try to get a proper fix that would be ideal.
gabriwinter said:
It can't be updated or it would loose the patch.
Quality wise I would say it's close to stock but probably a little below (can someone confirm this?)
For now I think this is the best we can get for non stock roms.
If someone wants to step up and try to get a proper fix that would be ideal.
Click to expand...
Click to collapse
Cool. Let's hope someone fix this further
i mean, perhaps setup a wrapper to divert the error message.... something like that.
btw, on stock there is a "Camera tuner for Moto G(4)", is it needed?
https://play.google.com/store/apps/details?id=com.motorola.imagertuning_athene
optionalmgrr.la said:
btw, on stock there is a "Camera tuner for Moto G(4)", is it needed?
https://play.google.com/store/apps/details?id=com.motorola.imagertuning_athene
Click to expand...
Click to collapse
I'm using cr droid and had this camera tuner by default
i'm geting "device not compatable" when i open the camera. And nothing to delete com system/framework
i have an moto x2 (xt1097) on aosp extended 7.1.2
help
tiagovicente2 said:
i'm geting "device not compatable" when i open the camera. And nothing to delete com system/framework
i have an moto x2 (xt1097) on aosp extended 7.1.2
help
Click to expand...
Click to collapse
This camera port is for athene only.