Related
Hi
Please help me before i go completely mad. I cannot get those pesky maps to install. I am installing from the original tomtom 5 cds in the Software + maps of western Europe version. The main software and UK jane voice all install Ok. But when i insert the second cd and select any of the UK maps option the install programjust disapears. I tried doing a Hard reset on my Universal and starting again. Still get nothing. When i run the TT sw it says "no maps found".
Then i stumbled accross this thread read it through and see that there are many more hurdles needed after i get the maps but found a few usefull threads on maps so. I did another hard reset and tried the suggestion of copying the Cab files direct to my SD card and running from there this time I get the message "Installation of Great_Britain_Plus was unscessful" I have tried this on 2 different SD cards a 1 gb and a 4gb both with plenty of space.
I would be really greatful for a step by step guide or a pointer to the correct thread on this or any other site. I am even happy to pay someone who lives in London to install for me. I am going away on a driving holliday in the UK next week and was hoping to use GPS for the trip but am feeling a bit dissapointed about it now.
Many thanks for any helpfull suggestions
Regards
Try putting the SD card in a reader and install the new map to the card reader (you get the location - where to install option during the install process) instead of on the PDA through active sync. Then simply open Tomtom and go to options and select change map and select from the one/s that you have installed through the card reader.
Hope this makes sense, and possible helps
put the maps into your root of storage card , remeber to keep the orginal names of foldesr. it looks like this in my case..
\storage card\great_britain-map.v5.66
you also have CurrentMap.dat file put in the TomTom folder in My Documents and creat empty TomTom folder in storage card. voices should be put it Voices folder of the storage card .
cheers, cudo
hope it helps ..
get the lastest update from the tomtom website for the universal otherwise youll have trouble getting it to work the isnt set to write protect is it
TomTom 5 latest version is 5.21. That said, the map installation software is horrible.
The only way to install the maps is to specify to a memory card. Do not use the install to Pocket PC or Folder. Select Other and use a memory card.
It goes very slowly ... so have some patience, get some coffee/tea/snacks while you do this.
I can't believe that this is a commercial software. It just not workable in this manner.
Happy day!!!!!!
i just found there is a update for trinity from tomtom.com
all we need to do is download latest tomtom home, install it, then download the new voice file from tomtom home(the old voice files cannot be readed by tomtom 6.03 on trinity)
here is the link http://www.tomtom.com/support/index.php?FID=6736&Lid=1
Hope this can help everyone who get the same problem as me. cheers
after i install the tomtom6.3 on my trinity(wm6), the voice doesn't work. i do have the "voices" folder in my sd card, but the voice just doesn't work!
anybody knows why this happened? thanks.
sailer1983 said:
after i install the tomtom6.3 on my trinity(wm6), the voice doesn't work. i do have the "voices" folder in my sd card, but the voice just doesn't work!
anybody knows why this happened? thanks.
Click to expand...
Click to collapse
put all voices (all files inside \voice\ folder) into tomtomnavigator folder, where is tomtom navigator.exe...
usually this trik works
bye!
ervius said:
put all voices (all files inside \voice\ folder) into tomtomnavigator folder, where is tomtom navigator.exe...
usually this trik works
bye!
Click to expand...
Click to collapse
thanks man, but i have tried this way before, it doesn't work.
when i use Garmin iQue M5(windows mobile 2003), tomtom6.3 works perfect.
Is there a newer version than 6.03? My installation has a Program files/Navigator/Voices folder with a file called collected on the phone. On the SD card there is also a Voices folder with a collected file and two data08 files, one of which is quite large (671kb). Also , the sound is muted if TomTom is launched when there's a data connection.
sailer1983 said:
thanks man, but i have tried this way before, it doesn't work.
Click to expand...
Click to collapse
How about deleting the collected.ini file, I vaguely remember reading that you need to delete this file in both voices directories (making sure tomtom is not running). Then restart tomtom.
Also put the voices file into the program files/navigator/voices directory on phone - I've never had any luck with the voices directory on the storage card, even though my maps are on there??
Sorry if somebody has already suggested this...
Cheers.
Voices are located in sd card root folder "voices", if you have problems try to download voices from tomtom, even if you have a "trial" version i think you can download.
PGMMA said:
Is there a newer version than 6.03?
Click to expand...
Click to collapse
No- 6.03 is the latest version
sailer1983 said:
after i install the tomtom6.3 on my trinity(wm6), the voice doesn't work. i do have the "voices" folder in my sd card, but the voice just doesn't work!
anybody knows why this happened? thanks.
Click to expand...
Click to collapse
Have you tried rerunning the initial setup wizard- you may be able to reselect the voice you want from the list, then TTN will copy it to the Navigator folder as the data0*.chk file.
In the directory of the map you are using, replace files TRAFFIC.INC and MapSettings.cfg with original versions from these. Make a copy of them first (e.g. as xtraffic.inc and xmapsettings.cfg)
This works for me.
You will loose references to favorites, home, etc.
I hope this helps.
thanks everyone here, appreciate for your help.
the way from CRH66 doesn't work. but thanks all the same.
MJ, i have to say, i have the right files in vovics folder, and it is in the root directory, i also put them in program files/navigator/voices
not very clear about Benzin's method use which file to replace the one your mentioned?
i will try NeilM's trick later, then i will let u know what happed. cheers
sailer1983 said:
...not very clear about Benzin's method use which file to replace the one your mentioned?
Click to expand...
Click to collapse
Each and every map directory contains cline.dat, cname.dat, etc, and also the two files I mentioned. These two files are updated each time you use TomTom. Sometimes they become corrupted and TomTom looses the voice. You need to replace them with an earlier version that works. Copy them from another installation (a friend, emule, etc.) and substitute the ones you have.
Sometimes just deleting/renaming them and making a soft reset may work.
I insist, this works for me. If this does not solve your case, there is information in other fora about the deletion of a file in the windows directory. I tried this before without success.
Sound has a big bug in TomTom 6.030
... late
Thanks for the information in the first post. I hope this solves completely the issue.
The latest version is 6.03. What sound bug - never had a problem myself.
No sound bugs in tomtom 6.03
As far as i know, the latest release of TOMTOM 6.03 contains no bugs voices.
Well the main and best thing, would be better u unisntall your soft completely from your mobile with activesync, "off your mobile completely for 1mn" then reinstall the soft again again.
better to try something than not to try anything.
The Thread Starter has now updated his 1st post to say the problem is fixed!
AFAIK there is no problem with the older versions of TTN and the Trinity, nor with 6.03 and voices, but certainly installing TT Home often helps because it allows the configuration to be managed.
Benzin said:
Each and every map directory contains cline.dat, cname.dat, etc, and also the two files I mentioned. These two files are updated each time you use TomTom. Sometimes they become corrupted and TomTom looses the voice. You need to replace them with an earlier version that works. Copy them from another installation (a friend, emule, etc.) and substitute the ones you have.
Sometimes just deleting/renaming them and making a soft reset may work.
I insist, this works for me. If this does not solve your case, there is information in other fora about the deletion of a file in the windows directory. I tried this before without success.
Sound has a big bug in TomTom 6.030
Click to expand...
Click to collapse
Hi Benzin, the problem has been solved, but thanks any way for your kindly help.
NeilM said:
The Thread Starter has now updated his 1st post to say the problem is fixed!
AFAIK there is no problem with the older versions of TTN and the Trinity, nor with 6.03 and voices, but certainly installing TT Home often helps because it allows the configuration to be managed.
Click to expand...
Click to collapse
NeilM, i completely aggree with u. there is no bug in ttn6.03.
and i think i have found the point.
when i install ttn6.03 and it's voices into my Garmin iQue M5(WM2003se),it works perfect. Then i install the same program and voices into my Trinity(WM6), the problem comes, no sound!
After downloading the new voice files via Tomtom home, i found there are different voice files for WM2003se and WM6. The voices for WM6 are a lot bigger than the one for WM2003se!!!
It means the same voice files will work for WM2003se but not for WM6!
All those people who have this voice problem should update their voice files
What the hell? Before I've changed the File system cache to auto it did work! But now that I have much more ram available about 21MB, it doesn't want to start. So I tried to go back to 4MB file system cache... but nothing, still that error message.
TomTom 7 is installed in the memory card... wtf???
zooster said:
What the hell? Before I've changed the File system cache to auto it did work! But now that I have much more ram available about 21MB, it doesn't want to start. So I tried to go back to 4MB file system cache... but nothing, still that error message.
TomTom 7 is installed in the memory card... wtf???
Click to expand...
Click to collapse
I've had this happen before, and if I remember correctly, it was a corrupt Map File. I restored an earlier copy of my maps to the SD Card, and all was good again.
Try hiding your maps and see if TomTom will run. It should ask you to use a Voucher. If it does, then it's the map problem and TomTom is fine.
Nope, I've tried this tip but no success... It's really odd...
Hi Zooster. Sorry to hear about the headache you currently have.
I have had similar problems in the past month, the first time really freaked me out.
In my case, I noticed that some of the files on my sd card know longer showed up, and later discovered that others had indeed become corrupted.
I solved it (and continue to do so when it happens) by formatting my sd card and copying back onto it a copy I have of all the Tomtom files. Infact, once you get it working again, I suggest you regularly make a copy of whatever is on your sd card in case it happens again. For me, it seems to be ROM specific, i.e. only happens when I flash some of the new ROMs. Sometimes the sd card suddenly stops showing up in file explorer, sometimes I just need to remove tomtom and then reinstall it.
The problem for you now may be getting the original Tomtom files, I guess it depends where you got them from.
When I flash some ROMS, this problem occurs. I have to avoid ROMs that do that and choose another.
I hope you manage to sort it out. I know what's it like when these things suddenly go wrong for no reason! Best of luck.
Mattster.
Ok, I'll try to restore original files... I'll let you know.
WHAT TOMTOM FILES DO YOU NEED ON YOUR SD CARD?
There seems to be an awful lot of tomtom files on my sd card, so I've started to delete some and see if Tomtom still works. And it does!
I've got it down to:
My Documents folder with maps inside
Voices folder
plus the following files:
ALBUM.VOL
AutoRun
Autorun.exe-run
Start
TTN
TTN2003
ttnavigator.bif
I've lost the 2257 file (that apparently causes automatic self install of Tomtom when you insert the card) so if anyone has that I'd like it back!!!
So, my question to all of you Tomtom users is: Which files are actually needed for Tomtom to work?
(I know there is the tidy up option of chucking any mystery files into a folder, but I like to know what all files on my sd card are actually doing!)
Mattster.
Hmmm...
Just had this problem myself, but might have fixed it on my Artemis
Originally I copied the TomTom Navigator.EXE to \windows\start menu\programs and it worked
However; it stopped working with the "not enough memory error" - so I started disabling applications, uninstalling them etc.
Still no joy
Just out of interest tried the TomTom Navigator.EXE within the TomTom folder on my SD card - and it worked...
I've deleted the .exe from "my device" and created a shortcut to my SD Card and now it looks like it is working again
Going to keep testing now - but perhaps worth a shot
Mattster_spv said:
WHAT TOMTOM FILES DO YOU NEED ON YOUR SD CARD?
There seems to be an awful lot of tomtom files on my sd card, so I've started to delete some and see if Tomtom still works. And it does!
I've got it down to:
My Documents folder with maps inside
Voices folder
plus the following files:
ALBUM.VOL
AutoRun
Autorun.exe-run
Start
TTN
TTN2003
ttnavigator.bif
I've lost the 2257 file (that apparently causes automatic self install of Tomtom when you insert the card) so if anyone has that I'd like it back!!!
So, my question to all of you Tomtom users is: Which files are actually needed for Tomtom to work?
(I know there is the tidy up option of chucking any mystery files into a folder, but I like to know what all files on my sd card are actually doing!)
Mattster.
Click to expand...
Click to collapse
For tomtom, TTN is the installation file, the others can be all deleted.
After installation, we only need the following 3 folders:
1. maps
2. voices
3. zip
All of them need stored in sd card root path.
If you need the satellite view, then you need one more folder in your sd card root, which is "raster"
The file "ttnavigator.bif" is auto generated by tomtom everytime you use it, you will always find it is still there even you have delete it sometime before, just leave it. Also "ttnavigator.bif" is a log file for tomtom, so it is useful, dont delete this file.
Mattster_spv said:
WHAT TOMTOM FILES DO YOU NEED ON YOUR SD CARD?
There seems to be an awful lot of tomtom files on my sd card, so I've started to delete some and see if Tomtom still works. And it does!
I've got it down to:
My Documents folder with maps inside
Voices folder
plus the following files:
ALBUM.VOL
AutoRun
Autorun.exe-run
Start
TTN
TTN2003
ttnavigator.bif
I've lost the 2257 file (that apparently causes automatic self install of Tomtom when you insert the card) so if anyone has that I'd like it back!!!
So, my question to all of you Tomtom users is: Which files are actually needed for Tomtom to work?
(I know there is the tidy up option of chucking any mystery files into a folder, but I like to know what all files on my sd card are actually doing!)
Mattster.
Click to expand...
Click to collapse
In the 2577 (not 2257) map are the following files:
AutoRun.exe
Autorun.exe-run
TTN.cab
TTN2003.cab
So you just moved them to the root
The actual files for running TT are automatically stored on the device, not on the storage card
Arjan
adejager1 said:
The actual files for running TT are automatically stored on the device, not on the storage card
Arjan
Click to expand...
Click to collapse
Thanks Arjan. Thanks for the reply.
What I'm curious to know is, after a new ROM flash (i.e. before TT has been installed on their clean device) what TT files do they have on the SD card.
Mattster_spv said:
Thanks Arjan. Thanks for the reply.
What I'm curious to know is, after a new ROM flash (i.e. before TT has been installed on their clean device) what TT files do they have on the SD card.
Click to expand...
Click to collapse
Sorry, can't answer that. Flashed my rom quite a few times but never bothered to clean up my storage card. Probably still got Tom Tom 6 and or WM5 stuff on there
i had the issue with artemis and tomtom Navigator v7.910.9185. It was on sd. Then i deleted voice and raster folder and suddenly the problem solved!
Then i copied voice folder back to sd with 3 voices (before i had about 25) and now it works like charm.
I have had this same 'memory' problem on a few devices,
it has always been sorted by an SD card format and a card restore from my PC.
as to Tomtom after a re-flash ... I have never had any issues with it at all,
I just restore a full backup with SPB backup.
i have tomtom 7 ver. 7.910 on my p3600 running wm6 pro but seems to always come up no gps device can anyone help, please send me a message soon thanks mossy
Go to Change Preferences, Configure GPS, Click Configure, Tap left Arrow to show Other NMEA GPS receiver and tap Select, Set 4800 Baud and tap Done, Select GPS in COM9, and you are good to go. Click Done to go back to main screen.
I had the same problem once, install chaps advance config an relocate the internet temporary internet files.
by default they are located in: \windows\profiles\guest
if you use youtube a lot and google maps i can happen too.
I get this all of the time.
the problem occurs when my battery gets lower than 70% and I launch TomTom Navigator 7.
what i do now is make a copy of the Map Folder and keep it on my memory card.
I also make a zip archive and keep that on my device (not SD Card) in My Docs or somewhere else with a copy of the corresponding .dct file and .bif files and installers.
this way, i can restore tomtom onto another sd card if need be.
usually i format the card and restore the zip archive!
*chung* said:
Hmmm...
Just had this problem myself, but might have fixed it on my Artemis
Originally I copied the TomTom Navigator.EXE to \windows\start menu\programs and it worked
However; it stopped working with the "not enough memory error" - so I started disabling applications, uninstalling them etc.
Still no joy
Just out of interest tried the TomTom Navigator.EXE within the TomTom folder on my SD card - and it worked...
I've deleted the .exe from "my device" and created a shortcut to my SD Card and now it looks like it is working again
Going to keep testing now - but perhaps worth a shot
Click to expand...
Click to collapse
Just had this same problem. Changing the Start Menu from a copy of the executable to a shortcut seems to have fixed it. Thanks for the tip!
Dan
Formatted sd card, reinstalled maps and everything needed from a backup = works.
Thanks xda, once again a timesaver...
Unable to start. Not enough memory is available. Mio 678 tomtom 7910
zooster said:
What the hell? Before I've changed the File system cache to auto it did work! But now that I have much more ram available about 21MB, it doesn't want to start. So I tried to go back to 4MB file system cache... but nothing, still that error message.
TomTom 7 is installed in the memory card... wtf???
Click to expand...
Click to collapse
hi, i have this problem to Mio spirit 678 when i try to stat tomtom 7910.
Can you help me.
ciao Diego.
Right so i have my Touch HD and i have installed TomTom 7 following instructions:
bmcconalogue said:
Can't help you with the freeware (aside from Google Maps, and the missus reading the instructions out loud, or maybe a map!)
To get TTN7 working (this is legally):
Go to this thread to get the link to 7.915 which works on the Touch HD.
In case you haven't installed stuff before:
Connect your Touch HD via ActiveSync
Copy the cab file to your touch (anywhere, I keep cabs I'm gonna install in a folder on microSD card)
On your HD click the cab to open and follow the instructions. I installed to the microSD card and it works fine, but people on here have said it works installed on the device too - whatever floats your boat)
Try running TomTom to check it works (you'll get a warning about having no maps, but it should give you the option to download a mall city map. I got the London map which only took a few seconds to download).
I'd then unplug the HD for the moment. Download the latest version of TTHome (this always give the latest version)
Before connecting your Touch you have to doctor TTHome to recognise the HD. Thanks to Noiz for helping me out here:
Go to C:\Program Files\TomTom HOME 2\xul\chrome and paste this over the contents.
Now you can plug your HD into your PC and TTHome will recognise it.
Finally in TomTom Home or the website buy the maps you want (the USA maps are still down for TTN7 last time I checked, but you can get full Europe, and lots of others still, and traffic and speed camera subscriptions).
Once you've bought them they'll appear in TTHome. It shouldn't (after the Noiz fix) say the map isn't compatible, but it won't install it. It should let you download it, it will go to the download directory (you can set that in TTHome options). Simply go there, extract the zip file to the root of your storage card with a folder the same name as the zip file. Extract the cab file that begins activation in the same folder.
You can now download new cars, voices, mapshare updates, speed camera subscriptions.
Sorry if I've written any of this wrong, in front of a different machine with none of this installed so doing it all from memory and glancing at bookmarked pages.
(None of this work is my doing, I have just got some hints from people on the way and combined it onto one post). All thanks to them!
Click to expand...
Click to collapse
so i have got to the part where i have added my free map, but i have a quick question before i continue - can i move the maps i have downloaded to a new memory card or will i have to redownload / buy them?
as im using a 512mb card at moment as mine didnt arrive with its 8gb card
you should be OK using a different card, because TomTom uses Device ID (switching Phones wouldn't work) not Card ID
anyone know differently?
okay thank you for the help - i just wanted to make sure before i go any further
I have a new copy of TomTom Navigator 7 and want to use it on my HTC HD Mini. It was supplied on a 4GB card but as I've got a 16GB card installed in the phone I've copied the contents over.
Originally I fitted the memory card they sent me into the phone but it kept reporting that this version was not compatible with this phone.
How did others manage to get this working on the HD mini...
Roy_s
If you use "search feature", you'll find a lot of post about Tomtom...
The official version is not compatible with HDmini, you have to look for another software version, modified...
Thanks for the reply, I did read some of the other posts but thought that they had managed to get the new version to work. I've used an older version (WM5) on an older HTC phone for a few years. The HD mini being the newer 6.5 you'd have thought it would work and still be compatible........
Roy_s
Like you , i've been disappointed to notice that Tomtom is unable to sell a correct version for a new mobile like HDmini while you can find one easily on the net .
I have asked them about this without correct answer at that moment !
I did the same, they can't even say when it will be tested or even if it is on the list to be tested with this phone.
I've since found the file ttn7.917.9186_vga_black.cab and will try running that to see if it then allows me to run the installation.
Roy_S said:
I did the same, they can't even say when it will be tested or even if it is on the list to be tested with this phone.
I've since found the file ttn7.917.9186_vga_black.cab and will try running that to see if it then allows me to run the installation.
Click to expand...
Click to collapse
If im right, im still using this version succesfully:
TTN_7.916.9192_QVGA_black_fixed_BT
You need the QVGA version with the Bluetooth fix, or else you will get errors.
Yes did see a post about TTN_7.916.9192_QVGA_black_fixed_BT but someone reported the GPS lagged. Have tried to search for that file but can't find a site that allows me to download it.
Still need to confirm the installation steps, do I run the cab first then install Navigator 7 or are there other files that I need to copy over..?
No problem, I have purchased the latest Navigator 7 from TomTom, just need help from everyone to get their software working.....
Roy_S said:
Yes did see a post about TTN_7.916.9192_QVGA_black_fixed_BT but someone reported the GPS lagged. Have tried to search for that file but can't find a site that allows me to download it.
Still need to confirm the installation steps, do I run the cab first then install Navigator 7 or are there other files that I need to copy over..?
Click to expand...
Click to collapse
The cab is Navigator 7 (TTN=TomTom Navigator). I can't imagine you can't find the file after a thorough google search...
Yes, there is some GPS lag. This can be solved by installing GPSmod driver:
http://forum.xda-developers.com/showthread.php?t=571266
Tomtom7 working perfectly in hd mini.
Hello, is more 'than a year I use tomtom 7 - although I prefer (IGOPRIMO1.2) per hour with only ris.480X272 - TTS, but much more detailed than the TomTom. I'm leaving screenshot .... screenshot4 in particular. Here's the data that I use TOMTOM WORKING PERFECTLY! Else can not .........
P.S. my vers. not to install but copy / paste to SD card. Start navigator.exe.
The only copy is on a Dutch share site that you need to be a member to download, tried a number of variations of the name but nothing labelled as BT fix.
So I tried ttn7.917.9186_vga_black.cab which I loaded to the phone memory. It found my map on the memory card and it asks for the activation code but then returns message saying its not valid..?
It's a legal map (Western_Europe_1GB) & code I purchased so should not be a problem.
Maybe I should delete all of the files that TomTom sent me on the SD card and just put the map on there in case their Navigator 7 files are causing the problem.
In fact .... I tried that (cab) you say ..... but does not work. You have to find a zip file, where there is only one folder. you just have to (COPY IN SD CARD) exe = navigator.exe. no installation on device! Then you have to validate your map.
p.s.To run you must first validate the MAP. by the code of your device you need the code for tomtom. the code of the device (it IDENTIFYING YOUR PHONE) is one that I deleted on screenshot4.
oregon69 said:
In fact .... I tried that (cab) you say ..... but does not work. You have to find a zip file, where there is only one folder. you just have to (COPY IN SD CARD) exe = navigator.exe. no installation on device! Then you have to validate your map.
p.s.To run you must first validate the MAP. by the code of your device you need the code for tomtom. the code of the device (it IDENTIFYING YOUR PHONE) is one that I deleted on screenshot4.
Click to expand...
Click to collapse
Thanks for the reply, I'm not sure I understand fully.
The cab I have loaded (ttn7.917.9186_vga_black.cab) you say does not work, which one did you use & where can I get it?
I can't find any file called navigator.exe either in the phone or on the memory card or the SD card that TomTom sent me.
Hello. You can not tell you more, because it violates copyright laws ......
I try to make you understand:
1. tomtom program:
time ago I tried (ttn7.917.9186_vga_black.cab) but I had problems .... then turning the net I found a file.zip. Inside a folder (Navigator). if you find that you just file.zip estract in sd card root. start *. exe. The version that I use are in screenshot4.
2 then you have to unlock the MAP,
ie have the license (serial number that you derive from your serial device). Your serial device appears when you start tomtom for the first time. (registration map).
I hope you understand.
Thanks for the reply, my version is a purchased copy from TomTom so I'm not violating anything I'm just trying to get it to work. The steps I've done so far are:-
Loaded TomTom 7.916.9192 QVGA black bt.cab
> Bttrayce error reported at boot up, deleted files BtCoreIf.dll & BtSdkCE30.dll, rebooted phone
> No error message
> Run Navigator, "Western_Europe_1GB map has not been activated" message
> Entered code from TomTom, message to say "Activating"
> Error "Activation failed. Sorry this is not a valid map activation code for Western_Europe_1GB"
The map is valid, it was supplied on a memory card with the activation code by TomTom, I have only copied the map to the memory card in the phone, none of the other files on the card supplied by TomTom.
I seem to have got over the Navigator installation problem but can't get the map to activate...? Its like this cab is not compatible with the latest map I have.
I have got TomTom v7 working on the HD mini.
As this was a purchased copy I contacted TomTom support and they manually activated the map, I loaded their activation file and all working.
I have noticed a little lag, not by much, but if I compare to an older phone running TomTom my new version seems to be 10 to 20 meters behind....?
Is this the GPS lag that others have pointed out, is there a latest patch to correct this...?
Not tried the home application yet either.
Roy_S said:
I have got TomTom v7 working on the HD mini.
As this was a purchased copy I contacted TomTom support and they manually activated the map, I loaded their activation file and all working.
I have noticed a little lag, not by much, but if I compare to an older phone running TomTom my new version seems to be 10 to 20 meters behind....?
Is this the GPS lag that others have pointed out, is there a latest patch to correct this...?
Not tried the home application yet either.
Click to expand...
Click to collapse
Read my post 9 in this thread, GPSmod driver should fix it.