Received my Trident Aegis case today. Went with the bright green (which I so far prefer to the darker green which they previously used, I had a Cyclops case in this color on my HTC Glacier.)
One gripe is, so far, the open space surrounding the camera on the back of the case. This is an odd decision. Not a big deal to me, though; but still worth mentioning.
The biggest gripe, though, is that the phone is not at all easy to actually get into the case. I'm not saying that it doesn't fit. The problem is that you first place the phone into the colored, gel surrounding piece. You then have to fit these piece (and its protruding buttons) into the very hard and rigid black/grey plastic piece. It's kind of hard to do this since the gel-covered buttons have to fit into the holes on the device, and I ended up hitting the power button over and over again, and botting into recovery because one of the volume rockers was held down.
My Cyclops case, for the Glacier, was designed in the opposite way. The phone first fit into two hard pieces (a front and back piece, basically), and then a black rubber surrounding piece went around the plastic itself. This was really easy to take the phone out of and place it back within.
I know people will ask...I'd say the phone doesn't add too much in the way of size to the already very large S-II, but the only comparison I have is the D30. I do not have the Incipio or Seideio cases to compare.
My aegis case for my vibrant was the same. Its how they all are in terms of getting it on. Waiting for mine to get for the sgs2
Sent from my SGH-T989 using xda premium
my main concern is how well it protects but a close second on how hard it is to get out of the pocket. if im going to spend to cash to get something that would work well i want it to be what i want. any opinions?
So overall how do you feel about the case?
Sent from my SGH-T989 using xda premium
I'd say pocket fitment is mostly contingent upon the pocket. I have been putting the SII + Trident case in the front pocket of shirts and it only sticks out a small bit. It fits in my jeans pockets, but I wear my jeans a bit baggy. It won't fit in the pockets of my dressier slacks. So, I find it easy to get out of most pockets. My Glacier + Trident was actually probably a bit more difficult due to the ribbed silicone surround. The case for the S II doesn't have much to snag on. Keep in mind though, that the Glacier + Case was a lot thicker, front screen to back battery cover, than the S II is. This definitely had something to do with it as well.
Overall I am pleased with the case. I like the color options, shape, and structural design of the case. While I did find the previous "Cyclops" style case that I had for my Glacier to be easier to take off and on, this new case seems, at least at first glance, to provide equal or better protection while also being easier to fit in pockets.
One footnote: I'm using this case along with a Zagg wet application invisible shield and I'm not having any issues with the corners peeling.
What did you pay? Looks sick.
Sent from my SGH-T989 using XDA App
damn just found the case i've been looking for.
+1 to TJBunch1228
How much did you pay for it? And where did you get it?
From http://www.tridenteer.com/products/Aegis-Case-for-Samsung-Galaxy-II-T989-(T%2dMobile)-(Green).html maybe?
yindraad said:
damn just found the case i've been looking for.
+1 to TJBunch1228
How much did you pay for it? And where did you get it?
From http://www.tridenteer.com/products/Aegis-Case-for-Samsung-Galaxy-II-T989-(T%2dMobile)-(Green).html maybe?
Click to expand...
Click to collapse
That is the one I got. paid about $24, I had a code for about 15% off. I just got another code for 20%. Will post it when I find it.
Sent from my SGH-T989 using xda premium
Does this case have a built in screen protector??
¤sent by the juggernaut¤
Daddio06 said:
Does this case have a built in screen protector??
¤sent by the juggernaut¤
Click to expand...
Click to collapse
No, but a screen protector is included.
Sent from my SGH-T989 using xda premium
_eroz said:
No, but a screen protector is included.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Same question I had, it says on product page that it includes a "Re-Applicable Screen Protector".
BTW, coupon code "holiday2011" gives you a nice $7 off!
does the screen protector look to be of good quality?
I also noticed that the plastic doesn't hold/secure the rubber on the bottom of the phone, is it easy for the bottom corners to come off say when you're putting it in or pulling it out of your pockets?
Thanks!
mealekz said:
Same question I had, it says on product page that it includes a "Re-Applicable Screen Protector".
BTW, coupon code "holiday2011" gives you a nice $7 off!
does the screen protector look to be of good quality?
I also noticed that the plastic doesn't hold/secure the rubber on the bottom of the phone, is it easy for the bottom corners to come off say when you're putting it in or pulling it out of your pockets?
Thanks!
Click to expand...
Click to collapse
+2 is the bottom or top floppy lime a basic gel case??
Sent from my SGH-T989 using XDA App
mealekz said:
Same question I had, it says on product page that it includes a "Re-Applicable Screen Protector".
BTW, coupon code "holiday2011" gives you a nice $7 off!
does the screen protector look to be of good quality?
I also noticed that the plastic doesn't hold/secure the rubber on the bottom of the phone, is it easy for the bottom corners to come off say when you're putting it in or pulling it out of your pockets?
Thanks!
Click to expand...
Click to collapse
rosebud1 said:
+2 is the bottom or top floppy lime a basic gel case??
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
The screen protector does look cheap. I'm not using it so I didn't really pay much attention to it. The hard case does not wrap around the bottom, so it is just the gel casing. But I haven't had any issues with the case coming off when putting the phone in my pocket
I really wish otter would make a defender case for this phone! I loved it on my iPhone
¤sent by the juggernaut¤
I paid $22 with free shipping using the promo code holiday2011.
And yes, I got it from the tridenteer site.
i just ordered one... ill compare and take pictures comparing it to my incipio silicrylic case when i get the trident
I put the screen protector on. Used a wet install. Looks great so far. Smooth feel and very clear. It is dark outside right now, so I will report back tomorrow during the day. Looks really good in the house. Just a few air bubbles settling. I can tell they will go away though.
Screen protector is great. Really clear in light and dark. I'm sure there's better quality out there but for free its great. Also I have the green case. Get compliments like crazy about this case. Very high quality and looks pretty sick. Great protection. Great looks. Great case.
FYI the Incipio case has the slight gap around the camera as well.
The only issue I have seen, been using the case about a week, is the flap that covers the charging port doesn't want to stay closed. It doesn't hang down enough to cause problems really but isn't a tight fit and would def let dust in. Other than this small issue the case works great.
Related
With all the talk about the Otterbox Defender ($50), haven't heard much press on the Otterbox Impact ($19.95 / $15 after discounts).
Anyway, my Otterbox Defender was a disaster so I got this instead and I gotta say, it is REALLY nice. The rubber is solid yet soft, fits ubersnug and the screen protector is THICK and high quality. For about $15 I am VERY pleased.
** Just put on the screen protector - no lint, bubbles easy to squeeze out - love it! This MUCH nicer than the Defender.
I am just amazed by this case. Just a simple silicone case but the silicone quality is so high and smooth feeling without being overly soft. The screen protector is thick and with zero finger drag. I honestly don't know why anyone would need more protection than this. The Defender is pure overkill.
Sent from my PC36100 using XDA App
Where did u get it ?
Sent from my PC36100 using XDA App
Ordered a couple of the Impact Series case's from otterbox site, hoping thy don't take as long as some of their cases have for people. Was leaning towards the trident case but after looking around decided to go with this. As far as cases go, a good silicon is all I really need so I'm excited to see how these then out. Glad to hear you like it, as with any case I've heard mixed results but I'm eager to see it in person.
SWYPED from my SUPASONIC
I bought and love the Commuter case. Has silicone core with plastic around it. Not big or heavy. Plus it doesn't catch pocket lint.
Sent from my PC36100 using XDA App
conqu1stador said:
Ordered a couple of the Impact Series case's from otterbox site, hoping thy don't take as long as some of their cases have for people. Was leaning towards the trident case but after looking around decided to go with this. As far as cases go, a good silicon is all I really need so I'm excited to see how these then out. Glad to hear you like it, as with any case I've heard mixed results but I'm eager to see it in person.
SWYPED from my SUPASONIC
Click to expand...
Click to collapse
Mine took about 5 days to arrive but I live on the east coast.
Even though the case is just silicone, it is pure quality. The screen protector is awesome too.
Sent from my PC36100 using XDA App
Looked at the commuter, I guess if I'm not feeling the Impact I could get that, all the stores around here carry that one and that one alone.
I keep reading about lint and or various fibers, which I don't necessarily foresee as being an issue (lint free), but do the grooves / textured backing catch stuff a lot? Like I said I'm not too worried, only curious.
And as far as the screen protector goes, I just use the ones Sprint sells. Have some extras so will see how different thr otterbox one is. Zero issues with this Sprint branded generic one, touch input / sensitivity or otherwise. Might just leave it.
SWYPED from my SUPASONIC
conqu1stador said:
Looked at the commuter, I guess if I'm not feeling the Impact I could get that, all the stores around here carry that one and that one alone.
I keep reading about lint and or various fibers, which I don't necessarily foresee as being an issue (lint free), but do the grooves / textured backing catch stuff a lot? Like I said I'm not too worried, only curious.
And as far as the screen protector goes, I just use the ones Sprint sells. Have some extras so will see how different thr otterbox one is. Zero issues with this Sprint branded generic one, touch input / sensitivity or otherwise. Might just leave it.
SWYPED from my SUPASONIC
Click to expand...
Click to collapse
Lint isn't a big problem because although this case is silicone it is a higher grade silicone and a bit harder than typical cheaper cases. The screen protector is nice because it is extra thick plastic so it is easier to get rid of bubbles.
To prevent lint and scratches just grab a microfiber glasses case from your local mall and slip your EVO into that before placing it in your pocket
Sent from my PC36100 using XDA App
Hmm, just got mine. Yesterday actually, but was sleeping. Initial impressions are mixed ... case is extremely loose on the sides. Guess I thought it would have been a snuggled fit with the "harder silicon" but it really is quite loose. To the point of it being a little bothersome. Not sure how much of an issue it'll be over the course of a day but a slight brush moves it. I dunno. Feels comfortable in the hand(s) though. Will have to give it a few days.
SWYPED from my SUPASONIC
conqu1stador said:
Hmm, just got mine. Yesterday actually, but was sleeping. Initial impressions are mixed ... case is extremely loose on the sides. Guess I thought it would have been a snuggled fit with the "harder silicon" but it really is quite loose. To the point of it being a little bothersome. Not sure how much of an issue it'll be over the course of a day but a slight brush moves it. I dunno. Feels comfortable in the hand(s) though. Will have to give it a few days.
SWYPED from my SUPASONIC
Click to expand...
Click to collapse
Weird. Mine literally could not be any more snug. There is no wiggle room at all.
If you mean that you can flip the edge a bit with your finger, well its silicone I personally don't find that bothersome at all.
Sent from my PC36100 using XDA App
Hah yes, right it is silicone and I know there is a lot of surface "area" between the edges but it seems flimsier than I would have imagined. As I said I thought, as read, that it had harder silicon. And I've had silicon cases for various devices and with most, once on, fit rather snug.
And with the backing ... noticed it seems to collect various "particle" stuff but can easily be wiped away. The one most often voiced concerning doesn't seem to be an issue. Doesn't seem to pull on my pocket lining. I like it but the flimsy edging is really bothering me. It even seems to stick out in the middle on the left / right sides. To the point if you push it you can see it press in to the side of the phone. I dunno ... I have 2 so it doesn't appear to be a defect ....
SWYPED from my SUPASONIC
conqu1stador said:
Hah yes, right it is silicone and I know there is a lot of surface "area" between the edges but it seems flimsier than I would have imagined. As I said I thought, as read, that it had harder silicon. And I've had silicon cases for various devices and with most, once on, fit rather snug.
And with the backing ... noticed it seems to collect various "particle" stuff but can easily be wiped away. The one most often voiced concerning doesn't seem to be an issue. Doesn't seem to pull on my pocket lining. I like it but the flimsy edging is really bothering me. It even seems to stick out in the middle on the left / right sides. To the point if you push it you can see it press in to the side of the phone. I dunno ... I have 2 so it doesn't appear to be a defect ....
SWYPED from my SUPASONIC
Click to expand...
Click to collapse
Dunno dude. Mine doesn't stick out at the sides at all. It is a VERY snug fit and the silicone on the sides is quite thick and not even remotely flimsy.
Don't know what to say. :-( The fit on mine simply could not be any tighter.
Sent from my PC36100 using XDA App
Get a cheap sunglasses pouch and put your EVO in it when the phone is in your pocket. Prevents lint and scratches and makes it easier to take out.
Sent from my PC36100 using XDA App
I got the impact case and used it for two weeks. The sides become flimsy with time with all the times you pull it out of your pocket. It's a nice case. But the sides becoming flimsy started to bug me. It also added bulk to it not alot but still adds some. I loved the grip though awesome.
I went to a sprint store and tried out the commuter case. Loved it, hard casing with rubber skin. Its a bit slippery though. But the case isnt bulky and fits the phone like a glove. Only thing I dislike is the bottom plug that protects the hdmi and usb. It opens up at times. But it's not a big deal. I get compliments on the commuter case as well pricey but I think its worth it. Both cases are great though. If the impact case didnt get flimsy with time it would still be on my phone the grip is great.
Sent from my PC36100 using XDA App
With all your raving about this case I had to see what the hubbub was about. Ordered mine yesterday. Thanks for the heads up, OP.
I do like the case, but still the edging on the sides is my only beef. Was thinking; I use these regular old screen protectors that cover just the screen and the one that came with case seems to cover most of front of phone. And wondering if maybe the little extra space would result in the front being more snug. Maybe not as its not that thick. Either way I'm liking it. The grip feels very nice.
SWYPED from my SUPASONIC
conqu1stador said:
I do like the case, but still the edging on the sides is my only beef. Was thinking; I use these regular old screen protectors that cover just the screen and the one that came with case seems to cover most of front of phone. And wondering if maybe the little extra space would result in the front being more snug. Maybe not as its not that thick. Either way I'm liking it. The grip feels very nice.
SWYPED from my SUPASONIC
Click to expand...
Click to collapse
Yeah that might have something to do with it. The screen protector that comes with it is thick. If I were you I would use it instead.
Sent from my PC36100 using XDA App
_MetalHead_ said:
With all your raving about this case I had to see what the hubbub was about. Ordered mine yesterday. Thanks for the heads up, OP.
Click to expand...
Click to collapse
Lol, yeah well I love it. MUCH better than the POS Defender.
Sent from my PC36100 using XDA App
Atticustrd said:
I got the impact case and used it for two weeks. The sides become flimsy with time with all the times you pull it out of your pocket. It's a nice case. But the sides becoming flimsy started to bug me. It also added bulk to it not alot but still adds some. I loved the grip though awesome.
I went to a sprint store and tried out the commuter case. Loved it, hard casing with rubber skin. Its a bit slippery though. But the case isnt bulky and fits the phone like a glove. Only thing I dislike is the bottom plug that protects the hdmi and usb. It opens up at times. But it's not a big deal. I get compliments on the commuter case as well pricey but I think its worth it. Both cases are great though. If the impact case didnt get flimsy with time it would still be on my phone the grip is great.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Lol, I honestly don't get the whole flimsy sides thing. The sides on my case are as snug as they can possibly be. Lol, oh well.
Sent from my PC36100 using XDA App
mitchellvii said:
Lol, I honestly don't get the whole flimsy sides thing. The sides on my case are as snug as they can possibly be. Lol, oh well.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Mine was snug fit at first. Over time it will get flimsy and loose won't be a snug as it was when new. Still a great case though.
Sent from my PC36100 using XDA App
I just got my S-line case (black) from eBay and I love it. It adds very little bulk, seems like it will do a good job protecting my phone, and looks very nice.
Definitely worth the $5!
Edit: Pics added
Jaxidian said:
I just got my S-line case (black) from eBay and I love it. It adds very little bulk, seems like it will do a good job protecting my phone, and looks very nice.
Definitely worth the $5!
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
I have one as well. Love it. Too bad the car dock doesn't work with the case on. I hate having to take it off, but at least it's pretty easy.
ttran97 said:
I have one as well. Love it. Too bad the car dock doesn't work with the case on. I hate having to take it off, but at least it's pretty easy.
Click to expand...
Click to collapse
Agree with you on all fronts, including car dock and easiness of taking the case off.
Sent from my ADR6400L using XDA App
Link?
10char
want a droid said:
Link?
10char
Click to expand...
Click to collapse
Was easy enough to find:
S-Line Ebay Case
For what it's worth, I got the black one, but I've heard better comments on the smoke one when I was doing my research.
Sent from my ADR6400L using XDA App
is the material that soft gel/rubber type? they look "sticky" lol how does it feel in the hand?
pretty cool looking, does it hold up?
is the inside rubber/silicon?
viceversa said:
is the material that soft gel/rubber type? they look "sticky" lol how does it feel in the hand?
Click to expand...
Click to collapse
There seems to be 2 types of materials, 3 finishes.
On mine, the clearish part is a slightly-bendable hard plastic with the texture of what all of my matte hard plastic. Think the type of plastic that is one most power adapters (that aren't shiny) but add a slightly bendable aspect to it.
The black part on the back is shiny, slick, smooth, and more flexible. It's similar to silicon cases (what I can assume you mean by soft gel/rubber) but I think it's still different. It seems to be less "floppy" even though it is very bendable. The shiny black part seems to "stick" to certain surfaces (such as my desk and other hard/flat surfaces) but not to some that you would expect (it doesn't stick to my pockets at all and glides just fine across my clothing, car seat, and non-leather furniture - it might stick to leather, I don't know). The black part on the front appears to be the same material as the black part on the back, but with a matte finish. The result of the different finish is that it doesn't have the "stickiness" on much of any surface, yet still gives your hand a slight bit of grip beyond what the stock TBolt gives you.
Overall, the "feel in hand" is comfortable and it gives you extra grip but doesn't feel sticky or anything like that. Imagine going from a slick, hard-plastic phone to a phone with a rubberized body (like our TBolt has). Going from a naked TBolt to this case is kinda like taking that one step further. But in no way could I ever describe it as "feeling sticky" in my hand or pocket.
jblist90 said:
pretty cool looking, does it hold up?
Click to expand...
Click to collapse
So it looks like/feels like it's not going to just fall apart or anything like that, if that's what you mean. I can't envision drops/dings or other daily use wearing it down.
The ONE concern that I have about it holding up is because it is made with two types of "plastic" (I don't know if it's plastic, silicon, rubber, or whatever, hence my quotes). I fear that if I take the case off and on a lot (for my car dock), that the joints of the two plastics might start to come apart. This is NOT based on any quality issues that I have seen so far, just a concern based on the fact that this wasn't produced in a single mold when it was melted down (this is coming from somebody with an engineering background).
I will be shocked, though, if I have a problem with this case in the next 6 months, and for $5, well, I'd say that's pretty damned good!
boristhebladexx said:
is the inside rubber/silicon?
Click to expand...
Click to collapse
Read my post a couple posts up about the 2 different types of materials with 3 finishes. As best as I can tell, the inside is the same material as the outside. What this means is that 60% of it is the very flexible plastic while the clear part does cover ~40% of the back. I would expect the black part to offer more protection to a fall/bump than the clear part, and fortunately the black part covers most of the corners and edges. Still, I expect the clear part to offer more protection than a hard plastic case would.
Updated the OP with some photos. Perhaps they will help.
thanks for the detailed feedback!
This case will also fit into the Verizon holster/shell combo holster. You just can't use the VZW shell, but it'll slide into the holster. The fit is a little snug, but it works. I like to swap out this case with the VZW shell. This one provies more protection, but the VZW one is pretty cool too.
In case anybody was wondering, I got mine from this seller from China: http://goo.gl/62Fhx
It took something like 10 days to get to me, but I didn't mind since it cost less than a good burger.
Jaxidian said:
I just got my S-line case (black) from eBay and I love it. It adds very little bulk, seems like it will do a good job protecting my phone, and looks very nice.
Definitely worth the $5!
Edit: Pics added
Click to expand...
Click to collapse
Hey, thanks for the write up. I'm in Arizona and ordered one for $5 from a California seller. I should have it early next week.
Thanks again
Sent from my BAMF ADR6400L using XDA Premium App
I ordered mine just before the thread was started and its my favorite case for my Thunderbolt. It looks so cool too!
sent from my BAMF Thunderbolt!
Well Done
$5 ARE YOU KIDDING ME? grrr I have the silicone case that I got from VZW for $15 and it's not even all that..
But I think all cases will add some bulk for for that price you cant go wrong. Great buy.
Might have to check this one out
Just a heads up, with this casr the phone fits like a champ in the holster of the shell/holster combo i got from VZW
sent from my BAMF Thunderbolt!
Here is a quick video review I made of the Trident Kraken vs. the Otterbox Defender for our GN:
Feel free to ask any questions you may have and I'll try my best to answer them.
I have a Defender, and it sucks for this phone. The holster security is nice, but the thing looks retarded when the phone isn't in it....
Thanks for posting the video, you have solidified my decision in buying the Kraken that comes in next week!
Good review. And yeah I agree the belt holster clip on the trident is not easy to use. A more conventional type would have been better.
Ahh I thought this would be the Kraken against the Commuter, not the Defender. I think the Defender is atrocious IMHO
Have you considered comparing these cases to the Incipio Silicrylic? I always go with Incipio when possible. Their support is amazing, their prices are reasonable, and their products look nice.
Pandages said:
Have you considered comparing these cases to the Incipio Silicrylic? I always go with Incipio when possible. Their support is amazing, their prices are reasonable, and their products look nice.
Click to expand...
Click to collapse
Incipio states all of their products are incompatible with the extended battery. Does it fit?
idefiler6 said:
Incipio states all of their products are incompatible with the extended battery. Does it fit?
Click to expand...
Click to collapse
Their feather case and the silicrylic case both do not fit with the extended battery and cover on, however if you pop the back door off the Nexus both fit like normal. I'm not sure about their TPU case though.
Yeah, I decided to compare these two because they are both supposed to be heavyweight cases unlike most others on the market.
I'd probably compare the Commuter to something like the Seidio cases.
As far as the Incipio, that would probably compare with the likes of the SGP Neo Hybrid or Ultra Hybrid.
I might do something like that next.
Sent from my Galaxy Nexus using xda premium
If you want a brick tough case go ballistic. Its awesome. Managed to fit it on my extended bat GSM. Made for i515 but fits wife's GSM too. Love it!
Sent from my Galaxy Nexus using xda premium
Does that come with a holster? If so, I may make a comparison vid with that one against the Trident Kraken.
Sent from my Galaxy Nexus using xda premium
Just got my defender today. I'll go ahead and give my 5-minute analysis. My Trident Kraken should be here early next week.
Pros:
Will protect phone very well (obviously)
Belt-clip holster is top-notch
The feel of pressing the side buttons is nice
Fantastic grip on the phone
Cons:
Dust and lint MAGNET
Hard to move in/out of pocket, might as well use the holster everywhere you go
Built-in screen protector is HORRIBLE. It makes the screen look as if it is covered in a thin layer of grease (I will be tearing this thing off)
Fairly impossible to see notification pulse if not viewing at direct angle
My GSM moves up/down inside of the case slightly (may not occur with extended battery)
Two other small gripes are that the mic hole is a bit off from where it is cut into the silicone shell (probably not a big deal, though). Also, pulling back the dust covers for access to the charging and audio port is also a small pain due to the way they open. It's essentially a two hand task (one to hold open the cover, the other to plug in) which was different from my old phone where once the cover was open, it would stay open by itself.
I will probably only use the Defender when I go to work. Other than that, I see the Kraken as being my daily case. I'll update in a few days with my opinion on it.
OP, it appears the Kraken covers up the LED notif light. Can you confirm?
WiredPirate said:
OP, it appears the Kraken covers up the LED notif light. Can you confirm?
Click to expand...
Click to collapse
It covers up about half of it, maybe a little more
Ngo93 said:
It covers up about half of it, maybe a little more
Click to expand...
Click to collapse
Yea that's the only thing I hate about the kraken... other than that the kraken is an amazing case I love it
Sent from my Galaxy Nexus using xda premium
dnguyen1988 said:
Yea that's the only thing I hate about the kraken... other than that the kraken is an amazing case I love it
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Yeah I was kinda bummed when I figured this out. Was looking forward to having a multicolored notification LED again, but I'd rather have the protection of the Kraken
Sent from my Galaxy Nexus using xda premium
Nitemare3219 said:
Just got my defender today. I'll go ahead and give my 5-minute analysis. My Trident Kraken should be here early next week.
Pros:
Will protect phone very well (obviously)
Belt-clip holster is top-notch
The feel of pressing the side buttons is nice
Fantastic grip on the phone
Cons:
Dust and lint MAGNET
Hard to move in/out of pocket, might as well use the holster everywhere you go
Built-in screen protector is HORRIBLE. It makes the screen look as if it is covered in a thin layer of grease (I will be tearing this thing off)
Fairly impossible to see notification pulse if not viewing at direct angle
My GSM moves up/down inside of the case slightly (may not occur with extended battery)
Two other small gripes are that the mic hole is a bit off from where it is cut into the silicone shell (probably not a big deal, though). Also, pulling back the dust covers for access to the charging and audio port is also a small pain due to the way they open. It's essentially a two hand task (one to hold open the cover, the other to plug in) which was different from my old phone where once the cover was open, it would stay open by itself.
I will probably only use the Defender when I go to work. Other than that, I see the Kraken as being my daily case. I'll update in a few days with my opinion on it.
Click to expand...
Click to collapse
the case is made for the cdma version or extend version, if you put two small bandaids on the inside of the back plastic plate it will keep your phone from shifting and avoid all scratches.
Ngo93 said:
It covers up about half of it, maybe a little more
Click to expand...
Click to collapse
dnguyen1988 said:
Yea that's the only thing I hate about the kraken... other than that the kraken is an amazing case I love it
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thanks for the confirmation. I should be getting my Kraken in Monday and I will start thinking of ways to cut the hole out.. Any ideas what the best way to do this will be? Maybe just a drill bit?
WiredPirate said:
Thanks for the confirmation. I should be getting my Kraken in Monday and I will start thinking of ways to cut the hole out.. Any ideas what the best way to do this will be? Maybe just a drill bit?
Click to expand...
Click to collapse
No prob and yea that probably is the best way. U can probably cut off a little bit of the silicon and the then use a drill to put a little groove in the face plate so the light can show
Sent from my Galaxy Nexus using xda premium
dnguyen1988 said:
No prob and yea that probably is the best way. U can probably cut off a little bit of the silicon and the then use a drill to put a little groove in the face plate so the light can show
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Sweet, appreciate the info. Wish I had a mill lol.
Ok so i just bought the ballistic maxx case from the at&t store for $50. I walk out to my car to put it on and quickly find out the case is a piece of $h!t. I dont know where to start but ill try. 1st its nothin lime the ballistic HC case i owned for other phones and absolutely loved. All it is is a ballstic sg case with this redicilous removable screen protector. Itd a hard plastic piece that you put on the phone after you slide the rubber gel on the phone. The plastic is hard to put on. I can see eventually scratching the phone trying to do this snd when you do get it on its lose as hell. It sits off the phone so far theres a gap in between it and the screen. When you press it it clicks against phone. The lip on the case is so big you have to curl your thumb to hit home screen. And ballistic has the balls to charge $50 for that piece of crap. This is one of the worst cases i have ever seen. I immediately took it back and got my refund. If you need a rugged case wait for the defender. That case is junk. If you dropped it in water the water would poor right through the cheap screen protector. Also theres no protection for camera. I took a few pics before returning.
Sent from my SPH-L710 using xda app-developers app
I was hoping to try the ballistic series too....dang
Sent fromTyra's galaxy siii C:
browniegirl said:
I was hoping to try the ballistic series too....dang
Sent fromTyra's galaxy siii C:
Click to expand...
Click to collapse
I checked it out at a AT&T as well and I have to agree...I thought it was garbage.
I dont understand what it is there trying to do. There HC cases were very good cases. Fit both my evos very good. Ballistics only downfall to me was customer service and they were normally late to the game. This case is just an embarassment to ballisctic. Very cheap not well cut and just dosent go well with the phone
Sent from my SPH-L710 using xda app-developers app
I hate bulky cases on slim phones anyway.
I got the case and I don't see why you guys are giving it such a bad rap. I bought it for when I go over to the desert for the extra protection and it should work just fine. I actually liked the look and feel better than other otterbox cases. Personal preference I guess.
I have the normal Ballistic SG coming from amazon tuesday or wednesday so I'm hoping it winds up being a nice case. if not ill probably check out the trident ageis or casemate tough
Thats too bad, it looks pretty cool
The main thing is that whole removable screen protector. That wws just a dumb idea
Sent from my SPH-L710 using xda app-developers app
Not really what I was wanting for $50, guess I'll get the otterbox.
Heres a video i found
http://www.youtube.com/watch?v=tKm14N17aSk&feature=youtube_gdata_player
Sent from my SPH-L710 using xda app-developers app
I had the same issue! It would bubble up after installing the screen protector. The case is JUNK. That is a fact.
No disrespect meant at all....but I completely disagree with the OP. I have this case and have grown to really like it. OP mentioned the screen protector having a gap between it and screen....it does not if installed correctly. Instructions clearly state to place screen protecter on phone BEFORE applying gel case. There is a lip around the screen prot/gel case that locks it into place (which also greatly aids in keeping water out....not saying go drop it in the washer and walk away but you get what I mean). then the polycarb shell fits perfectly....it's all a tight fit and imo looks good. i added pics of mine installed in another thread(can't remember where at the moment). Anyway, I wrote this reply to let people know it's not a bad case....actually had an otterbox defender on my previous phone and it became stretched out and ugly as hell. this case won't do that bc of the outter poly carb shell and how the gel shell is locked on the screen protector. Just saying don't dismiss this case on one or two bad reviews. It's a great case if installed correctly. I even ordered the Ballistic SG in a different color combo to switch things up since i already have the screen protector and holster. I would NOT have ordered a second if it was crap!!
EDIT: http://forum.xda-developers.com/showthread.php?t=1732976&page=6 Here's the link to the thread w/ pics of the BSGMaxx
werked said:
No disrespect meant at all....but I completely disagree with the OP. I have this case and have grown to really like it. OP mentioned the screen protector having a gap between it and screen....it does not if installed correctly. Instructions clearly state to place screen protecter on phone BEFORE applying gel case. There is a lip around the screen prot/gel case that locks it into place (which also greatly aids in keeping water out....not saying go drop it in the washer and walk away but you get what I mean). then the polycarb shell fits perfectly....it's all a tight fit and imo looks good. i added pics of mine installed in another thread(can't remember where at the moment). Anyway, I wrote this reply to let people know it's not a bad case....actually had an otterbox defender on my previous phone and it became stretched out and ugly as hell. this case won't do that bc of the outter poly carb shell and how the gel shell is locked on the screen protector. Just saying don't dismiss this case on one or two bad reviews. It's a great case if installed correctly. I even ordered the Ballistic SG in a different color combo to switch things up since i already have the screen protector and holster. I would NOT have ordered a second if it was crap!!
EDIT: http://forum.xda-developers.com/showthread.php?t=1732976&page=6 Here's the link to the thread w/ pics of the BSGMaxx
Click to expand...
Click to collapse
You also said in that thread that your not using the screen protector. I would imagine its bc of the lack of clarity or something else? Why pay $50 for a rugged case if you dont have the built in screen protector? They need to bring back the HC series. And when the defender is released youll see how making a 3 layer rugged case look smooth and fluid isnt that hard
Sent from my SPH-L710 using xda app-developers app
bmoreboy02 said:
You also said in that thread that your not using the screen protector. I would imagine its bc of the lack of clarity or something else? Why pay $50 for a rugged case if you dont have the built in screen protector? They need to bring back the HC series. And when the defender is released youll see how making a 3 layer rugged case look smooth and fluid isnt that hard
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
You are correct. When I posted that I wasn't using the sp. I liked it then. Now I have it on and like other just the same. Its still very responsive and clear. NO gap between screen and sp at all. I have used an ob defender....smooth and fluid are not words I would use to describe it. I liked it bc I could bounce it off of cement with no ill effects but it was hello ugly imo. To r each his own I guess. Just wanted everyone to see how the sgmaxx preformed when installed correctly.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
werked said:
You are correct. When I posted that I wasn't using the sp. I liked it then. Now I have it on and like other just the same. Its still very responsive and clear. NO gap between screen and sp at all. I have used an ob defender....smooth and fluid are not words I would use to describe it. I liked it bc I could bounce it off of cement with no ill effects but it was hello ugly imo. To r each his own I guess. Just wanted everyone to see how the sgmaxx preformed when installed correctly.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
In your pictures it dose look like a nice fit. I tryd puttin the screen protector on before putting silicone on and after and it just was hidious. Also watchin the video review on youtube people really didnt have anything good to say. I just like the HC case and tje Defender because it gives you the feeling the phone is sealed tight and well protected. Ballstic sg maxx to me isnt really any different then a seidio rugged combo case. Layer after layer but no real screen protection
Sent from my SPH-L710 using xda app-developers app
Bought a clone from ebay. $5. Hasn't arrived yet. I still think the Kraken will be the one to beat.
I have a commuter now and i really like this case. I normally hlget defenders but must admit after a while between the dirt that gets under the screen protector and stuff it gets annoying. I have the visor screen protector now and really like the slim case.
Sent from my SPH-L710 using xda app-developers app
The case isn't horrible but it is (at least for me) difficult to hit the buttons at the bottom of the screen. The removable protector is not a "bad" idea but if they had a better fitting screen protector I think it would be better for us users. Having the option to replace it is nice but you don't have the option to have the screen face out while in the holster. I saw that seidio has the surface case so I might return this case and buy that. I really wish they would make a waterproof otterbox case which might happen because FINALLY Samsung has a device that is the same shape for all the carriers!
Usually with the Otterbox cases I pop out the built in protector and put one on the screen directly. I had an iPhone 4 that got chips in the glass because of little particles getting in between the glass and the built in screen protector.
bmoreboy02 said:
You also said in that thread that your not using the screen protector. I would imagine its bc of the lack of clarity or something else? Why pay $50 for a rugged case if you dont have the built in screen protector? They need to bring back the HC series. And when the defender is released youll see how making a 3 layer rugged case look smooth and fluid isnt that hard
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I have the same case and I like it. It was not too difficult to put on for me. As for the screen protector, I also have it off and like that it is not like the Otterbox. Why do that on a $50 case? Its the same reason I rip the display cover off the Otterbox Defender series. Because I don't like them. If I ever start scratching my display maybe I will install the removable display cover since it can go on and off. But I get these cases not for the screen protector but for those rare times I drop my device. And for that I am fine with it.
Can anyone recommend this case? I've been searching like mad for the perfect case to fit my requirements, and been having a hard time. I need a case:
Protects phone
Easily removable
Able to slip into/ carry in a side
Leather holster
Must have good grip!
I need good grip as I'm a mechanic
and dirty/greasy hands makes for
more potential dropping. The diztronic case appears to fit my needs, but would appreciate some feedback! Thanks!
Sent from my SGH-T989 using xda app-developers app
md95 said:
Can anyone recommend this case? I've been searching like mad for the perfect case to fit my requirements, and been having a hard time. I need a case:
Protects phone
Easily removable
Able to slip into/ carry in a side
Leather holster
Must have good grip!
I need good grip as I'm a mechanic
and dirty/greasy hands makes for
more potential dropping. The diztronic case appears to fit my needs, but would appreciate some feedback! Thanks!
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
I have the diztronic tpu case and i love it. It fits better than any other case i've used for this phone. Slips in and out easily. Doesn't add much to the thickness of the phone. Only recommendation - get it in black. I had it in clear and in smoke, both yellowed in a matter of weeks. I have a black one now and it is awesome! They're pretty cheap too, I got mine on amazon. Think it was like 10 bucks or something...
Sounds good..What about fitting into a side belt holster? Will the case meterial catch too much? I'd like to avoid having to fight getting the phone in and out. Thanks man! For 10 bucks I should prob just try it out lol..
Sent from my SGH-T989 using xda app-developers app
md95 said:
Sounds good..What about fitting into a side belt holster? Will the case meterial catch too much? I'd like to avoid having to fight getting the phone in and out. Thanks man! For 10 bucks I should prob just try it out lol..
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
The case doesn't add much thickness to the phone at all. You can get the case in matte back finish or glossy back finish. I've always gotten the matte finish, because it looks nice, slides easily, but still provides excellent grip. I've read reviews that the glossy finishes attract dust, and I would imagine the glossy finish one would get caught more easily in your belt holster. I would definitely recommend the matte back black case. I doubt you will be disappointed.
I can't post links because i'm still "new member" (i don't really post a lot), but if you search amazon for B005YEFM8M then you will see the case I am talking about. Currently going for $9.90.
Thanks for the info! I went ahead and ordered the matte black case. I'll come back here and review after I get it.
SGH T989 SII JEDI MIND TRICK V6
still waiting on the case..bump for 10th post lol
SGH T989 SII JEDI MIND TRICK V6
I have the clear one, and I like it but it has damaged my phone's frame. I think its because it doesn't fit 100% perfectly so dust accumulated in between the frame and the case, thus scratching the frame.
So just make sure you clean it often.
Sent from my SGH-T989 using xda app-developers app
joshuoner said:
I have the clear one, and I like it but it has damaged my phone's frame. I think its because it doesn't fit 100% perfectly so dust accumulated in between the frame and the case, thus scratching the frame.
So just make sure you clean it often.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Yea, same thing happened to mine, but as long as you keep a case on it, you can't even tell.
Got the case today and here are my thoughts: Fit and finish is good. My biggest gripe is the sides. Its fairly easy to move the sides away from the phone, and this is especially noticed when pulling the phone out of the side holster. Not a deal breaker, but something to be aware of.
I was anticipating a bit more grip, but its not bad. For protection, I think it should do the job, although dropping the phone from chest height to concrete is something that concerns me. Hopefully I won't have to find out lol. I need a larger side holster as its a bit too tight, and retrieving the phone should be easier. I'll stick with this case for now, but still open to other options.
I still feel like I need just a tiny bit more bulk and grip, to be perfect.
SHG-T989 SII JEDI V6
Ordered a black case and loving it! Fits very nicely and not too bulky. The customer service is awesome as well. I recommend!
Sent from my SGH-T989D using xda app-developers app
Got mime in the mail today and like it so far
Sent From a Jedi Knight far far away... using Jedi Kernel
Base on the posts here, I ordered the Diztronic and just got mine yesterday from Amazon and it's a **perfect** fit for my TMobile T989. Thanks!
testrider said:
Base on the posts here, I ordered the Diztronic and just got mine yesterday from Amazon and it's a **perfect** fit for my TMobile T989. Thanks!
Click to expand...
Click to collapse
be sure to periodically clean dust from its borders because I think it scuffs the phone otherwise