Okay, this is up now for you brave people to test!
Here's the original thread.
[EXPERIMENTAL] MultiROM v11 (Touchscreen support) - Boot ROM from sdcard
All the important info and how-to-use instructions are in the first two posts of that thread.
If you like it, please go there and click on thanks for Tassadar.
I've given it over a week of testing between v10 and v11 and haven't found a single glitch myself.
So, here you go!
The ported recovery has a kernel compatible with either novatek or hitachi screens, if you're wondering
CWM-based MultiROM recovery for the Optimus V (flashable zip)
md5sum: 3113af2b52db9532717ab8d38e82e6e8
MultiRom v11 for the Optimus V
md5sum: 3f3523ffe17158d3ff5b8e3b662c76bf
Previous links are dead, bite me 4shared
here is twrp, cwm, and multirom installer with a working (for now, bite me androidfilehost too,) download folder
https://www.androidfilehost.com/?w=files&flid=317349
I'll post more info later (I'm short on time but said I'd get this uploaded today.)
all you really need to know to make it work is in the original thread. Just use these Optimus V files instead of the ones in Tasssadar's post.
I'll edit this and the second post later with more specific instructions.
FYI: This is not a ROM. This is a recovery, and flashable overlay for your boot.img which allow booting from roms on sd-ext or from internal memory.
Please read the original thread before using.
More later! Enjoy.
Oh, yeah.
Standard disclaimer: Flashing your phone may cause bricking.
Don't blame me, or Tasssadar... Just take proper precautions. As the original thread says, BACKUP! Also, never flash a ROM and recovery at the same time, make sure the first works before you flash the second.
extra info:
you can't mix froyo and gingerbread ROMS unless you flash a Xionia or Xionia Redux anykernel over your boot.img first.
The multiROM uses the boot.img kernel for all the installed ROMs, and most kernels are made for either froyo or gingerbread but not both. Xionia kernels are the only exception to that rule I'm aware of.
I'll link to the xionia kernels later, for now it's just a short warning.
Yay, my old login still works! Downloading now, will test and report on both forums.
Edit:: Just saw my post count. Wowsers! I knew I was a lurker but two and half years and this is my first post here!?
Thanks alot for porting this over to the OV! I'm going to test it out as soon as I have an hour or two. Should make things easier when debugging new builds.
Going to try this sometime today I'm pretty sure some will find the original thread guide a bit confusing lol
I'm going to try this over the weekend. It might come in handy for testing builds. Ill try it. Thanks.
Sent from my LG-VM670 using xda premium
DarkLG said:
Going to try this sometime today I'm pretty sure some will find the original thread guide a bit confusing lol
Click to expand...
Click to collapse
unfortunately I'm even wordier than Tasssadar, so when i eventually get time to rewrite the directions and add them to post 2, they probably won't be much more user-friendly.
and it may be a couple days until screenshots and directions show up.
mostly i just wanted the thing up for others to play around with.
bigsupersquid said:
unfortunately I'm even wordier than Tasssadar, so when i eventually get time to rewrite the directions and add them to post 2, they probably won't be much more user-friendly.
and it may be a couple days until screenshots and directions show up.
mostly i just wanted the thing up for others to play around with.
Click to expand...
Click to collapse
True having it up is most important I'll try it sometime today and possibly try making a noob friendly guide if I have some time.
Alright guys i successfully got this to work. Its pretty cool,thanks.My son is freaking out,how i got 2 roms booted at the same time.
Installed, how do you want me to help test?
Sent from my LG-VM670 using Tapatalk
Been on this all nite and all day,runs smoooth. No glitches at all.
Optimus V Backside- ICStheme
with multitom v11
Heeres the guide I made as simple as I could haha:http://forum.xda-developers.com/showthread.php?p=20654451#post20654451
Nice to see this, good work By the way, MultiROM Mgr app (in original thread) should work on this device too, but do not use online install/update feature, it is only for LGP500 for now, but I will add support for this phone, too.
Can somebody send me output of "cat /proc/cpuinfo" on your phone?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-VM670 using Tapatalk
One more thing - show me output of "ls -l /dev/block" please, just to be sure sd-card has same major number.
Sent from my LG-VM670 using Tapatalk
Thanks. v13 should be compatible with this phone, do full backup before testing however. It is using files by bigsupersquid.
http://www.multiupload.com/NYYBX9CAFD
smokenbiskits said:
Installed, how do you want me to help test?
Sent from my LG-VM670 using Tapatalk
Click to expand...
Click to collapse
i put this up for grabs more as a public service than a work-in-progress.
just run the roms like you usually would, and post anything that doesn't work right (unless, of course that item is broken in the rom itself)
Wow, this works nicely.
Oh, I forgot something: If first line in Updater in Mgr app is not "Model: LS670/VM670", do not even try it! It means it did not recognize that it runs on different phone.
Related
HI all,
just do a quick port.you can run android 2.3 GINGERBREAD on your Hero now.
but with many many not working hardware.
you can use this as a demo to exprence the UI improvement on android 2.3
the screenshot is in Chinese but the ROM is full language.
not working:
wifi
data/radio
almost all...what a pitty...
but i will do my best to make it work.
hope your guys like it.
Originally Posted by shaverdoff
some people of friendly site 4pda.ru try to flash this rom and have error.. question to author of topic - how you flash it on you device? via m-recovery 162?
I am too lazy to sign the zip file. please sign it before you flash it.in other way you can use ClockWorkMod recovery to flash this pacakge .ClockworkMod Recovery will not verify the signature.
http://bbs.goapk.com/thread-41684-1-1.html
http://rapidshare.com/files/435455200/update_signed.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks Tenfar but my Chinese isn't good enough to sign up and it seems a bit too much effort to learn for a incomplete taster. Looks interesting though.
hi there!
Gingerbread with flykernel
epic!
I recon that if vanila roms had all hardware operational, perhaps with gingerbread it will be the same.
With regards
brat.haneq
flash or not to flash... that is the question! haha
Awesome! Too bad it's in chinese. But I'll consider flashing it to have a look.
Ill definitely flash just not now. At college with 10% battery left why do all the good things happen when I'm stuck here
Sent from my HTC Hero using XDA App
I can try and get the English one posted up, but it's not gonna be supported or likely ever updated. More something to look at, gaze at, and uninstall
google translate will help
To be honest, as nice as it is to see gingerbread running as a proof of concept, I am not sure anyone will bother completing the port.
Don't take this as an attack on the devs, who have done a miraculous job of keeping the Hero relevant in a world of 3.7"+ screens and 1GHz processors. The Hero is just getting too long in the tooth now, and the hardware was very quickly outdated. Most of the people who bought one when it came out will be nearing the end of their contracts (mine is up next March) and I can't see it surviving as long as the G1 did simply because the hardware didn't rely on locked down proprietary drivers like the Hero does.
It was quickly ignored by HTC and superseded by devices of the Nexus spec, and I can't see it being able to cope much longer. It would be a really nice swan song for it to get 2.3 though, nice way to draw a line under it development. I hope someone proves me wrong and there are still talented devs with Hero's as daily devices, but as far as I can tell most of them (if not all) have moved on to bigger and better devices, and who can blame them?
EDIT: I will look at using the framework-res to create a theme for our hero's so we can at least pretend we have Gingerbread
im pretty damn positive someone WILL make a decent port of Gingerbread.
Only a mater of time... lol
some people of friendly site 4pda.ru try to flash this rom and have error.. question to author of topic - how you flash it on you device? via m-recovery 162?
have a bug then try to flash
E:Wrong digest: META-INF/com/google/android/update-script
E:Verification Failed
Click to expand...
Click to collapse
shaverdoff said:
some people of friendly site 4pda.ru try to flash this rom and have error.. question to author of topic - how you flash it on you device? via m-recovery 162?
Click to expand...
Click to collapse
I am too lazy to sign the zip file. please sign it before you flash it.in other way you can use ClockWorkMod recovery to flash this pacakge .ClockworkMod Recovery will not verify the signature.
If someone upload the file, I will sign it. I can't seem to sign up to the forum so I can't download it.
EDIT: OK so I got signed up, where is the download link?
EDIT2: Found it! Gimme 15 min to download and I will upload a signed version
tenfar said:
I am too lazy to sign the zip file. please sign it before you flash it.in other way you can use ClockWorkMod recovery to flash this pacakge .ClockworkMod Recovery will not verify the signature.
Click to expand...
Click to collapse
thanks for rapidly answer but for me is not good idea to flash another recovery.... fix my opinion if i'am wrong
can't wait uploading^))
I've downloaded it, signed it and flashed it and it works, I am uploading to rapidshare now
EDIT: I wouldn't get too excited about it, not only does nothing work (not even USB so I can't sideload anything), but it is laggy as hell. I will try and rip the resources from it though
EDIT2: Here is the signed version http://rapidshare.com/files/435455200/update_signed.zip
with your permition i can upload to my server too, no waiting, and nice and fast.
Unlimited bandwidth to burn! haha
Blimey! Nice to see that it even runs! (I'm guessing its 3.0 not 2.3 which is going to have super stringent hardware requirements)
I do agree with l0st.prophet though. I bought my Hero sim free and I've made a deal with myself and my bank account that I won't upgrade until it's totally obselete. With 2.2 and Google decentralising updates to the OS the Hero should last a bit longer (Hopefully long enough for me to finish my degree and get a job!)
I would love a 2.3 theme though as the look and feel of the new OS is just more pleasent.
can u please upload it on an other server rather than rapidshare
I just broke my Desire, so i have to wait for my insurance company to send me a new one so i can start testing early alpha/beta ROMs on my old Hero
Will test this one for sure when i have it. probably within the next two weeks.
...................................
Awesome to see some cdma love. I may flash this while waiting for hc beta.
Sent from my Samsung Galaxy Tab using XDA Premium App
Congratulations, sir. Thank you for the time and your interest in the CDMA tabs. We are lucky to have you here.
congrats and nice work Jim.
thanks alot, we need more people like you here on the galaxy tab section.
seriosly, there is far too little roms for the CDMA/verizon tab.
flashing now
now dont bike my head off for posting what works and what dosent
Thanks for the rom. I will test it on a sprint taaab.
Installation aborted
First off thanks for providing another ROM for us CDMA ppl!
Now to business, I have CWM v3, i go to run the .zip and it goes
Installing update...
Installation aborted.
This happens every time, I tried to re-download the zip and giving it another shot but same issue, any ideas?
Thanks!!
jschmid698 said:
First off thanks for providing another ROM for us CDMA ppl!
Now to business, I have CWM v3, i go to run the .zip and it goes
Installing update...
Installation aborted.
This happens every time, I tried to re-download the zip and giving it another shot but same issue, any ideas?
Thanks!!
Click to expand...
Click to collapse
I ran across this problem with one of my tabs, but not both.
If I accessed CWM using the power and Vol+ key CWM would boot, but fail at flashing.
Go to advanced, reboot recovery
Then try to flash the kernal, then rom.
Im about to post the link to the "package" that has the zimage so people can flash the kernal via heimdall.
oldmacnut said:
I ran across this problem with one of my tabs, but not both.
If I accessed CWM using the power and Vol+ key CWM would boot, but fail at flashing.
Go to advanced, reboot recovery
Then try to flash the kernal, then rom.
Im about to post the link to the "package" that has the zimage so people can flash the kernal via heimdall.
Click to expand...
Click to collapse
Ok, i tried that twice and still getting the same issue. any other ideas?
Thank you so much for some vzw love! I love my tab and hate the lack of support. You and spacemoose are awesome! Charging batt as I type to flash this!
Sent from my SCH-I800 using XDA App
Alright, If rebooting recovery doesnt work install the kernal via CWM, than reboot into recovery again, although this time its with Koush's kernal. I was than able to flash the rom!
Thanks!
Alright, If CWM wont install the .zip, install the kernal via CWM, than reboot into recovery and Koush's kernal will than allow you to flash the .zip.
BTL? Psirens? Smeghead? Bit of a fan of the big red one are we?
Ding ding ding.
Ha ha, oh, in a big way
knightnz said:
BTL? Psirens? Smeghead? Bit of a fan of the big red one are we?
Click to expand...
Click to collapse
Sent from my SCH-I800 using XDA App
wow if you actually get around to releasing a gingerbread, that would be awsome. i know spacemoose is already working on a honeycomb, but im almost sure gingerbread has Netflix support on the GSM roms
i can wait untill you release that, ill help you with finding bugs if you need me, remember, im never scared of flashing, just hit me up. if i could do more than find bugs, i would.
I love this rom so much. Is there a way to fix rotation?
Sent from my SCH-I800 using XDA App
So I applied the .so file from the voodoo kernal thread, and rotation works on this ROM. It's also pairing with my bluetooth keyboard folio, so that's win. I pink puffy heart the browser, too. It's fun.
Sent from my SCH-I800 using XDA App
wolfie083188 said:
wow if you actually get around to releasing a gingerbread, that would be awsome. i know spacemoose is already working on a honeycomb, but im almost sure gingerbread has Netflix support on the GSM roms
i can wait untill you release that, ill help you with finding bugs if you need me, remember, im never scared of flashing, just hit me up. if i could do more than find bugs, i would.
Click to expand...
Click to collapse
OK, first off.....NOT MY PORT.
But I did stay at a holiday in last night.
This is a cdma cm7 gingerbread port, in a way its kinda a hybrid build. I myself am working on stripping out all the cm7 stuff, fixing camera, apps, weird touchscreen bugs, etc.
I'm kinda shooting for an aosp-ish build, however, I am waiting on permission from original developer to publish any changes I make.
3g and wifi do work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SCH-I800 using XDA App
in CMW, it hangs at around 10% when copying files.
this bites, and i did it pace by pace
Awesome!
I already clicked thanks, but also wanted to write, Thanks!
It will be nice to have something different to play with while I await HC beta...
Already downloaded both files, I'll install and test tonight.
This is my first rom for the WFS, Mainly i made it for my wife but its stable,Fast,Rosie is snappy and runs pretty damn good with the standard kernel!
I will try to update it as much as i can but its my wifes WFS and she worries about me with her phone lol
Based on the HTC Europe 2.13.401.2 RUU with some added bits and pieces.
So "Whats different?" Well try it and see how it feels! I've added quite a few tweaks and am pretty sure its the fastest WFS Rom i've tried!
I WILL UPDATE OP TOMORROW AFTER WORK!
Antutu score :1500? Will have to improve that!
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment 845540
It also includes....
Orange Signal boost (UMA)
Alot of tweaks, Some from the Sensation forums (makes it pretty fast!)
CIQ REMOVED!
Sense 3.0 Style Lockscreen
Apps2sd (Please let me know on this as she doesn't use it)
Advanced Reboot Menu - Thanks to mindhaxer (i had it nearly done but it wouldn't compile! Saved me so much work!)
More Tweaks
More that i have forgotten!
Used parts of Jinkaro's updater script (although i think it was originally erasmux's)
To come...
Remove unwanted apps
Move large files to SD by default (NOT APPS2SD) (Ringtones ETC)
More...
The important bit....
MD5SUM:Marvelous_V2.zip c07ba6e0765ff52b6653c6e5caf4a822
CHECK THE MD5SUM BEFORE FLASHING!
DOWNLOAD HERE at 3:30am GMT
If you would like to donate, Do so to my wife the poor woman has to put up with me! I do not ask for donations but every Cent/Pence Helps DONATE Personally i like people to press my Thanks button on the right under this writing
Tips and Tricks
1.Apps2sd) I think its disabled on start so check HERE For Darktremors command list (cachepart puts the device into bootloop for me)
or try this in terminal or adb shell
su
a2sd cachesdreset Thanks to elf2009
2.First boot) The ROM is de-odexed so it WILL take a while to boot up! Keep this in mind!
3.Installation) I am NOT responsible for ANY damage to your phone, Your on thee forums you accept that by flashing anything.Full wipe is recommended but not essential.
4.Overclocking) You can use overclocking kernels if you wish, make sure its compatible! I dont use them on my wifes WFS.
Orange Signal Boost Requested by Eoghan2t7
You have to Edit your build.prop to haev this line rild.libpath=/system/lib/librilswitch.so Then flash the zip file through recovery, Turn on your WIFI and open the app wait a minute and Voila
Big big props to ratykat and brokenwall.
DOWNLOAD HERE
Bug Reports...
As far as i know there are not any bugs please feel free to PM me if there are any.Im on the Sensation forums all the time and rarely here.
Can you upload the signal boost app please
Sent from my HTC Wildfire S using xda premium
Sure give me 5 minutes, You need matching lib files..I will make it as an update.zip
Updated 2nd post with Orange signal boost UMA
bonesy said:
Sure give me 5 minutes, You need matching lib files..I will make it as an update.zip
Click to expand...
Click to collapse
Thanks I would download the whole rom but I'm not on wifi at the moment
Sent from my HTC Wildfire S using xda premium
Its done.3.09MB File
Mods may as well remove this as no one seems interested in it
I would test if I were gsm, but the librilswitch advice is great. I added a little detail to my porting notes. Don't loose faith man.
Rob
Sent from my HTC Marvelc using Tapatalk
will there be an oc kernel for this rom ? and some date about updates ? what u working on, and when can we except it to appear ? ^^
r3v0Lut10n said:
will there be an oc kernel for this rom ? and some date about updates ? what u working on, and when can we except it to appear ? ^^
Click to expand...
Click to collapse
You can use this overclock kernel
http://forum.xda-developers.com/showthread.php?t=1430677
intel007 said:
You can use this overclock kernel
http://forum.xda-developers.com/showthread.php?t=1430677
Click to expand...
Click to collapse
ok, will try it as soon i meet my gf -.- but cwm backup 1st
Whats to come is in the first post.Firstly i want to clear some more space up and add advanced reboot menu hopefully before the weekend!
Hey man, have you considered apps2sdgui from market to configure darktremors scripts? I don't have a wfs so can't test, but i use it on my hd2 and it works a treat =]
Sent from my HD2 using XDA App
Hey
First of all: nice work, it's a great ROM, i installed and it's very snappy but, has a major inconvenient, at least for me, to little space on internal storage - around 60 mb. If you can solve this to be alt least 100 it will be great.
Thank you for you ROM an keep up the good work!
efl2009 came up with a solution...Write this in terminal or adb shell command
su
a2sd cachesdreset
Click to expand...
Click to collapse
Very interesting, have been browsing for a rom that has a stock a look as possible, but with performance tweaks. Downloading now, thanks bonesy!
Sent from my Skate using Tapatalk
Bug?
I think i found a bug. GPS doesn't work! Any ideas?
Thank you?
efl2009 said:
I think i found a bug. GPS doesn't work! Any ideas?
Thank you?
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showthread.php?t=1392466
Flash from clockwork mod.
Thank you for the info.
I used this patch http://forum.xda-developers.com/showthread.php?t=1447593 and is working perfect now.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
General Info:
More information about Firefox OS (B2G) is available here and here. So... I saw this and couldn't resist having a little sneaky play around with it. This is NOT a daily driver. This is NOT stable. It's pre-alpha. If you want something to use as a phone, this isn't it. If you just want to use your phone as a phone, you need android rom.
With that aside, and with the clear understanding that while this won't brick your phone, it's nothing to do with me if it did for some reason, or likewise if your cat (or other cute pet) suffers a painful death as a result of flashing this. At your own risk, like everything else here on XDA-Developers!
So without further ado, WTF is this? Well, it's a project from Mozilla (the lovely people behind the Firefox browser). I won't go into details, suffice to say I suggest you read a lot over at their wiki - start off at https://wiki.mozilla.org/B2G and work your way through the pages.
These builds can only be installed with CWM!!!
Instructions for installing the first time :
Wipe data/factory reset
Format system
Install data.zip
Install system.zip
Upgrade Instruction:
Format system
Install system.zip
Download:
Data
System
Code:
Build 6:
-Update code base
-Some changes in kernel
-A new method of installing data
Build 5:
-Update code base. This month guys from mozilla have done a lot work on creating your own font and acceleration drawing graphics.
Build 4:
-Update code base
-Volume keys used as a menu button
-A new method of installing firmware via recovery
-Use ftp server for firmware. Thank you so much for this, [B][I][U]ancdix[/U][/I][/B]
-Small code cleanup
-Fix some small bugs
Build 3 did not laid out in public.
Build 2:
-Update code base
-Support flash firmware via recovery
-Increased performance
Build 1:
- Initial release
Follow me on G+ for more news:good:
Really nice work, I was looking at giving this a go myself.
So what doesn't work?
That would make it's easier to determine whether to experiment or not!
Do calls and sms work?
Sent from my Galaxy Nexus using Tapatalk 2
Instalation from twrp or cwr recovery nor work, only fastboot?
Oh, sorry, only fastboot. (((
Sent from my Galaxy Nexus using xda premium
Elisha said:
So what doesn't work?
That would make it's easier to determine whether to experiment or not!
Do calls and sms work?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
It is not for daily using, only for experiments)
KeLeM said:
Instalation from twrp or cwr recovery nor work, only fastboot?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I wrote instraction. For now it only for fastboot.
this could be EPIC!
Can we have the images to start testing?
Menelkir said:
Can we have the images to start testing?
Click to expand...
Click to collapse
Press download
Oh, the link didnt appears in tapatalk, my bad.
hehe, just tested it out.
Looks pretty awesome, suprised at how fast it boots. Can't wait to see the development for this, looks like it's going well already!
Neat, going to test it out
One massive bug I noticed is that the ROM has no buttons, which makes doing anything difficult, since you can't go back or home
Just to let people know, this will wipe your sdcard folder so take your backup out! ^^
Neato! Can someone post a video of it running on the Gnex?
I will try to fix bugs and will make a new build every weak. Second build will be avaliable as cwm archive without wiping sdcard)
Sorry for by bad english =)
xrCore said:
Neato! Can someone post a video of it running on the Gnex?
Click to expand...
Click to collapse
I like this idea, +1.
This is great work though, you guys here on xda are incredible. This is EXACTLY why i got a Nexus.
So anyone create a way to have onscreen buttons yet?
I know theres a lot fo you super talented guys out there
I would like to see a video too, as i'm very curious, but I´m fine with my actual rom
Actually theres a few youtube videos of what it looks like. Not great videos but at least an idea of what it is. Honestly it doesnt look super different from Android. At least as far as the interface goes.
flashed it, testet, wanted to revert ... now my sdcard is formated, alle data gone...
xrCore said:
Neato! Can someone post a video of it running on the Gnex?
Click to expand...
Click to collapse
I'd like to see this too!
So here's the deal. I rooted my D710BST (ICS 4.0.4, fl24) with framaroot. I had no custom recovery so i used mobile odin (i don't have a pc) to flash garwynn's custom kernel ( http://www.sxtpdevelopers.com/showthread.php?t=119 ) so i can run agat's cr. Well now i have random power downs and gps failure. I have not been able to play ingress in over a week and its driving me nuts!!!
I just wanted to run this by more knowledgeable individuals. In theroy (until confirmed), since the kernel is a safe kernel, i can jump straight outta ICS. I am wanting to load ProjectX ROM ( http://forum.xda-developers.com/showthread.php?t=2320041 ). It requires a clean flash. [q] Since mobile odin can flash from internal SD and i lack computer, can i not move all my pics, vids, personal files (etc...) to my external SD, remove it, then flash clean?
noob alert: everything i have ever done in the root world is in this post
5min between posts?!?!? I just wanna edit this one!!! grr
What gives? Do i need to put "[q]" in the title?
I drive a cab and kinda rely on my gps. I can manage, with just my map; but i miss my navi!
Can you put a custom recovery?
Sent from my LG-LS970 using xda app-developers app
It is running agat's custom recovery from kernel targeted by first link on op.
If you have access to a computer I would highly recommend starting with this-http://forum.xda-developers.com/showthread.php?t=2216606
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
More stock stuff? Sheeesh, why am i rooting? This beautiful sounding ROM was developed by your team! Why the discouragement? And, as i said before, i do not have a computer. How come no one will just answer the question? I am a strong person and can take criticism, if that is what i needed. Is your projectX ROM not safe/ideal?!?!? Sorry man, Im just baffled you would discourage use of your own products. Am i missing something? Confused
Sorry for sounding stubborn but, i really wanna try that ROM. Im just saying, if i wanted to stay stock, i would have never researched my way to xda. All the op details were so i can be thorough. The actual question was about the internal (clean) flash. I mean, should i not try your ROM?
If you read the first post in the thread you would see the instructions on how to install... and the first step is upgrading to the official upgrade because this creates the Preload partition, it is a necessary step. Not discouraging you from using Project X at all, I am about to release an update soon. I just want you to be aware of the proper procedure so things don't go wrong. The first post in the Project X thread has all the steps you need along with links to all the files you need.
Oh my god! I am sooo sorry i read that the wrong way! I feel like anass now! My apologies.
Yeah, i read about the partition change from ICS. So, using your link to upgrade and fix partitions would make for a smooth projectX installation? Does that mean i don't have to clean flash, since Im not coming from ICS?
Blaze68 said:
Oh my god! I am sooo sorry i read that the wrong way! I feel like anass now! My apologies.
Yeah, i read about the partition change from ICS. So, using your link to upgrade and fix partitions would make for a smooth projectX installation? Does that mean i don't have to clean flash, since Im not coming from ICS?
Click to expand...
Click to collapse
Just follow the instructions exactly and you'll be fine
bilgerryan said:
If you have access to a computer I would highly recommend starting with this-http://forum.xda-developers.com/showthread.php?t=2216606
Click to expand...
Click to collapse
Thank you for all your help. This, in particular, helped me out the most. Without knowing what to expect, I got a bit worried when there was no boot after el29 kernel flash. Limited computer access kinda snailed the process. Once i was up, i had to do the "clear data" on play store and its framework, in order to download anything. I lost your custom store but, I'm running! I am really enjoying all the green! I love the Pandora lock screen and the starry boot animation and the....... I'm sure I'll find tons more, in due time!
Sent from my SPH-D710 using xda app-developers app