I am pretty picky when it comes to car mounts. I typically hate universal mounts because they are so bulky. So as i wait for for a sweet made-for-evo sexy solution, this is the next best thing that i have found. This thing folds up on itself when not in use. This video describes it way better than i can.
thanks to a nice member of the slickdeals forum, the coupon code WOOT brings the total to $5 per set (up to 3) plus $5 flat rate for shipping. Each set comes with one mounting arm and 2 buttons (for 2 devices i guess)
I have no clue how long the coupon lasts for but i snagged two, one for me and one for the wifes car so we can swap back and forth. The few reviews seem good and i figure its not that great of a risk for 15 bucks. I am going to stick on the little buttons to a case, not directly to the evo. If anyone is interested, i can post pics and stuff when it comes in.
Edit: I don't have enough posts to post links...
hmm, now i cant edit either. i am not trying to spam, just trying to share.
if you go to google and search "soundgate m2 wired for less" you will find the links to discussions of the deal on multiple sites. maybe a kind soul could post a link here too?
pretty slick...I do not like how ever that a "disc" is required that attaches it to the actual device. I wouldnt be putting it on my phone. So I would have to pick up another snap case and mod it...
But not a bad price and not a bad looking product.
It is interesting...I need something...and you can't beat $10
https://www.wiredforless.com/ProductDetails.asp?ProductCode=SOUNDM2
exactly what i was thinking! i kinda wish i bought an extra one so i could have a little nerd dock at my desk.
I have these...and I use them for my iPad...yep! It works with the iPad. I am VERY happy with these. They came pretty fast too across the country. I recommend these very much. To be honest, I am NOT a fan of putting a disc on the back...but I have a skin on my iPad so if the skin comes off so does the disc so that made me feel better about it leaving marks...weird..I know...and it comes with extra discs.... the owner is a nice guy too. Very helpful.
Just my opinion...
pretty cool you can just put that disk on another case and slip your phone into that one when your in the car if you dont want to put it on the actual phone...
hey ken987,
How thick would you say those little disk thingies are? I already ordered it but i am a little curious if these things will be low profile enough to still slide in my pocket. I am planning on sticking it to the back of an innocase ii
Wow for 10 bucks this is a great find. Thanks
Cool find and great coupon code, thank you! I already have a mount for my phone, but I will use this for my girlfriend's car. I went ahead and ordered three.... just need to figure out what to do with the other two, maybe buy a tablet?
I would say as thick as a quarter......I don't think it would be a bother. I have 2 on the back of my ipad so I can do landscape or portrait and I barely notice them when I hold the iPad in the house.
blackshin0bi said:
no longer working with the coupon code of "WOOT" ?
Click to expand...
Click to collapse
Still works, I just tested it.
also if you put 1 button on the back of a phone case, can you choose if you want it in portrait or landscape after the install? In other words i am wondering if it only seats properly 1 way and you have to stick it on right or if you can swivel your phone back and forth. perhaps portrait for music time and landscape for gps?
I bought one and the spare disk kit. I was looking for a kit and this is not bulky will be out of the way but accessible. I thought about the extra re-installation kit. I will go to home depot for that if I ever need it but that disc for the device...you never know.
The video shows that you can rotate the base 90 degrees to put your device in landscape / portrait w/o having to use a different disc.
This is a great find. $40 off with the coupon code??? I ordered two as well. Thanks for sharing OP. I'll share my experiences with it when it comes in.
Thanks just ordered one too... Great!
Got this installed last night, works quite well. For those planning on using it mostly in landscape orientation I recommend putting the disc in the middle of the EVO, not higher up as they recommend. I put the disc right over the HTC logo and it tends to hang a bit crooked in landscape because it is out of balance.
This is a pretty decent car mount option though, the disc on the back is only mildly annoying. It's pretty easy to mount and unmount, although I still wish there was a custom mount option.
Thanks to the OP for the post and the coupon!
There is an issue with the Evo as it has a textured finish to the case. The disc has a tendency to fall off when turning to lock it.
Love the mount, this is top quality stuff and very small form factor. The disk is not noticeable on the phone (yet protects the camera)
Thanks for sharing it with us, for only $5 I figured I would get two and check 'em out. I don't want to put anything on my phone though, so I think I'll find a cheap case and use it that way. You really can't beat the price though!
I got my Vibrant last week, and I needed a contest entry for a contest over at Instructables, so I hacked up a cheapy iPod dock into an awesome dock for my Vibrant.
The speakers are great for desktop use at work, despite being so cheap.
Unfortunately, I can't post a link to it ... so here are some pictures instead.
Not bad, how do you feed audio into those speakers? Using the AUX jack on the top of the Vibrant im guessing?
Yeah. It's not shown in the pictures, but that speaker set has a built-in 3.5mm cable. You just plug it into the headphone jack on the Vibrant.
NICE! I love instructables.
Is that Sugru for the bumpers? Trying to think of things to do with my samples - neat stuff.
Anyway, awesome dock. Need to keep my eyes open for a cheap dock like that.
Yeah, the Sugru is for the bumpers. I also used it to cover the rough edges of the cut plastic, and to give traction to the feet and stabilize the bottom of the speakers (they liked to rock forward when the phone was placed on the tray).
Those speakers are linked in the Instructable ... I can't post links, but if you search on Amazon for "folding speaker set" and then sort price lowest to highest, you can get those speakers for less than $5 including shipping. They have black ones too.
I happened to get the white set for free from a giveaway. The sugru was free too, so in my case, this dock cost me nothing but a USB cable.
Here -- I think this is your Instructable: http://www.instructables.com/id/Hacking-Cheap-iPhone-speakers-for-Android-Dock/
And the dock: http://amzn.com/dp/B000C8TSCQ
Might need to try making myself one of these too.
Personally, I'm hoping for a rotation mod (like CM has......it'll probably have to wait until CM6 is ported to it) that'll allow for the phone to be upside down. When that happens, I'll try to basically make this, but with a mount for the phone to actually dock into the connections.
If/When I ever get the ambition to do this, I'll definitely be using this instructable as a starting point.
THANK YOU!
Saiboogu said:
Here -- I think this is your Instructable:
Might need to try making myself one of these too.
Click to expand...
Click to collapse
Awesome, thanks for posting those. That is indeed my Instructable.
tjhart85 said:
Personally, I'm hoping for a rotation mod (like CM has......it'll probably have to wait until CM6 is ported to it) that'll allow for the phone to be upside down. When that happens, I'll try to basically make this, but with a mount for the phone to actually dock into the connections.
If/When I ever get the ambition to do this, I'll definitely be using this instructable as a starting point.
THANK YOU!
Click to expand...
Click to collapse
Yeah, rotation upside down would be awesome. If that were the case, you'd have to lose part of the tray in this version. But I do have a set of desktop computer speakers that are USB powered ....
Nice
Where did you get the clock app?
It's called Digital Clock, you can get it on the Market. It's a free app.
I also have those speakers. I can honestly say they are very cheap but good for the money. If you don't feel like waiting for shipping just go to wal-mart, they are packaged with some of their shirts for about 7 bucks
Sent from my SGH-T959 using XDA App
Here's another one that I submitted to Instructables today ... no speakers on this stand.
tekkguy said:
Here's another one that I submitted to Instructables today ... no speakers on this stand.
Click to expand...
Click to collapse
jesus hahahah
Hey bro, what case are you using, and where did you buy it from?
I'm using the Jelly Case by Amzer ... got it at Amazon: amzn (dot) to (slash) aTMvCj since I can't post links
By the way ... voting started today at Instructables, so if you're a member there, I'd love to have the votes!
Sugru substitute
You can use Goop or other similar type instead of sugru. There is also liquid handle sold as well. You can buy it at home depot or other places like that in adhesives section. there area bunch of these poly urethane polymers. Basically all you have to do to form it is use wax paper to create the depression shape desired.
BTW. You mentioned USB speakers. I have hooked those same speakers up via usb (just strip on end and shove it where the overall + and - of the batteries would be). Take very little electrical knowledge, but I would look it up if you haven't messed around with wiring things up, but I love turning things into USB powered. Although I wanted to put a mini-usb connector on mine and have yet to do it, but just say, for those of you out there, these speakers run off USB just fine.
Well when you buy them from amazon they come with a usb power cord. I didn't get mine from amazon.
Sent from my SGH-T959 using XDA App
I have a Samsung Captivate and was unable to find the dock sold in Canada at stores or online, so I decided to create a dock of my own.
All I used was a black sketching board (not bristol), black electrical tape and a few other items used to create the dock (scissors, ruler, pencil), also added two batteries for weight but anything else could work.
The dock in my opinion looks very good, I was aiming for a minimalistic look while making it sturdy as well. This dock is also very versatile, it can work in both landscape and portrait mode.
Overall time to make this was two hours *due to figuring out measurements and putting it precisely together*, but it was worth it. I saved myself several dollars which is always a plus.
If you are interested or have any questions about this, just ask!
I have uploaded a few pictures of process and final. (I wasn't able to upload each step by step process due to the picture limit of my account)
Cheers!
Nice!
deadly0ne said:
I have a Samsung Captivate and was unable to find the dock sold in Canada at stores or online, so I decided to create a dock of my own.
All I used was a black sketching board (not bristol), black electrical tape and a few other items used to create the dock (scissors, ruler, pencil), also added two batteries for weight but anything else could work.
The dock in my opinion looks very good, I was aiming for a minimalistic look while making it sturdy as well. This dock is also very versatile, it can work in both landscape and portrait mode.
Overall time to make this was two hours *due to figuring out measurements and putting it precisely together*, but it was worth it. I saved myself several dollars which is always a plus.
If you are interested or have any questions about this, just ask!
I have uploaded a few pictures of process and final. (I wasn't able to upload each step by step process due to the picture limit of my account)
Cheers!
Click to expand...
Click to collapse
THATS AWESOME! looks great i have got to try this. unfortunately i have the creativity of a dead leaf
That's pretty awesome. I was thinking of doing something similar with fiber glass shortly. Lol
Sent from my SAMSUNG-SGH-I897 using XDA App
Problem is.... and I'm NOT trying to be critical here, please understand that from the get go.... that ISN'T a dock, it is a stand! A dock also incorporates the charger so you "dock" the phone into the charging port so it automatically connects the cable. What you have, and it is very nice looking, no doubt about it, is a stand with a cable behind it, same as what I've done and most of us have done.
I've rigged a car charging DOCK up once, but the thing is SO fussy, if you are off by a fraction of a millimeter or don't push the phone all the way in with the strength of the Hulk it sometimes seems, then it won't charge the phone, and all those hours spent making something custom are wasted....
Looks good, again! Now make it charge the phone just by dropping it in!
Heya
This looks really nice, is there any way you could make a youtube video or something with the process? im definetly interested. The only image i saw with dimensions isnt enough :S.
Supaphreek
I'm getting a free Galaxy Tab 3 as a promotion from Time Warner Cable (which I assume is the 7" version based on the statement on their website that says "$199 value") and thought it would be kind of cool to use it for recipes. The idea is that I would use Pepperplate, and use Smart App Protector to keep the screen on while Pepperplate is open. The part I haven't decide on is where to put it. At this point, the most practical thing seems to be to get a case that has strong magnets fastened to the back, which could remain on the tablet at all times, and when I want to use it to cook with I could just slap it on the fridge. But I haven't been able to find any cases that seem to fit this need. Does anyone have any suggestions for this? Or suggestions for a case that may be ideal to Gorilla Glue some neodymium magnets too?
The under-the-counter mounts don't seem to be a good solution because I would like this to be portable when it needs to be. Also, I'd love to hear if anyone has any suggestions on how to implement some method of charging while it's on the fridge, though this is not too important to me and is more of a curiosity than anything else. I was thinking perhaps if the tablet is capable of wireless charging, having magnets around the edge and a wireless charging base on the fridge that would go in the center, then trying to find a way to run the cord along the edge of the fridge door. And if it has NFC (which unfortunately it looks like it may not) perhaps I could have a tag on the fridge that would trigger Pepperplate to launch.
This is all just for fun, but it would be really neat to have some sort of set up where I could just slap the tablet on the fridge and have it do its thing. The biggest priority is finding a case that would be magnetic or easily modified to be magnetic. Any input is welcome. Thanks!
Super Sam Galaxy said:
I'm getting a free Galaxy Tab 3 as a promotion from Time Warner Cable (which I assume is the 7" version based on the statement on their website that says "$199 value") and thought it would be kind of cool to use it for recipes. The idea is that I would use Pepperplate, and use Smart App Protector to keep the screen on while Pepperplate is open. The part I haven't decide on is where to put it. At this point, the most practical thing seems to be to get a case that has strong magnets fastened to the back, which could remain on the tablet at all times, and when I want to use it to cook with I could just slap it on the fridge. But I haven't been able to find any cases that seem to fit this need. Does anyone have any suggestions for this? Or suggestions for a case that may be ideal to Gorilla Glue some neodymium magnets too?
The under-the-counter mounts don't seem to be a good solution because I would like this to be portable when it needs to be. Also, I'd love to hear if anyone has any suggestions on how to implement some method of charging while it's on the fridge, though this is not too important to me and is more of a curiosity than anything else. I was thinking perhaps if the tablet is capable of wireless charging, having magnets around the edge and a wireless charging base on the fridge that would go in the center, then trying to find a way to run the cord along the edge of the fridge door. And if it has NFC (which unfortunately it looks like it may not) perhaps I could have a tag on the fridge that would trigger Pepperplate to launch.
This is all just for fun, but it would be really neat to have some sort of set up where I could just slap the tablet on the fridge and have it do its thing. The biggest priority is finding a case that would be magnetic or easily modified to be magnetic. Any input is welcome. Thanks!
Click to expand...
Click to collapse
here's how I would do it...
Get yourself a (or 2) cheap TPU cases. I have one called BoxWave. 5-6 bucks.... Ebay or Amazon
A semi flexible stiff rubber (TPU) case that the Tab gets fitted into..just like the supersoft silicone cases, but the TPU material is alot stiffer, but still flexible enough to get it on and off your tab easily..
then get peel and stick magnet strips for any hardware store..Home Depot, Lowes, Walmart, True Value, Ace... wherever
Stick the magnets to the TPU case and let them set up for 24 hours before putting the Tab in it and putting weight on it..
if youre scared..
Gorrilia glue will work too.. remember.. it's just a cheap case and worth the sacrifice..
Then there ya go!! slip the Tab into the case and stick the Tab on the Fridge!!!
Good luck and be sure to post Pictures of your success!!
jimmbomb said:
here's how I would do it...
Get yourself a (or 2) cheap TPU cases. I have one called BoxWave. 5-6 bucks.... Ebay or Amazon
A semi flexible stiff rubber (TPU) case that the Tab gets fitted into..just like the supersoft silicone cases, but the TPU material is alot stiffer, but still flexible enough to get it on and off your tab easily..
then get peel and stick magnet strips for any hardware store..Home Depot, Lowes, Walmart, True Value, Ace... wherever
Stick the magnets to the TPU case and let them set up for 24 hours before putting the Tab in it and putting weight on it..
if youre scared..
Gorrilia glue will work too.. remember.. it's just a cheap case and worth the sacrifice..
Then there ya go!! slip the Tab into the case and stick the Tab on the Fridge!!!
Good luck and be sure to post Pictures of your success!!
Click to expand...
Click to collapse
That sounds like a fantastic way to do it. I was very uneasy about magnets because of two things: the first is that I was afraid they would separate and the other is that I thought I'd need magnets so strong they may damage the tablet. Gorilla gluing them to a case is perfect because it's strong, doesn't damage the tablet, and doesn't require ridiculously strong magnets like I'd need if I had something like a metal plate inside the tablet that the magnets would need to stick to. I wish I'd seen this post a few days ago, because as it turns out I have already started another plan, which I've already ordered the parts for, but I'm strongly considering cancelling my order to give your method a try. The one thing that makes me hesitate is that with the new plan, I've come up with a way to hide the cord, whereas I was unable to think of a way to do this when it's on the fridge.
Here's what I put together: I have a cabinet directly on the left of my stove (as opposed to the fridge which is directly to the right of it). The cabinet starts about a foot and a half off the ground and comes up to about my neck. The idea is to mount it on the cabinet door and hide the cord in the cabinet, and the specifics are as follows. There's no power source inside the cabinet, so I was going to drill an extension cord sized hole in the back base of the cabinet to slip an extension cord into. Then I'd drill another (smaller) hole in the door for the micro USB end of the charging cable. Next, I'd put the power cable together, and it consists of 3 parts. The extension cord, a USB-to-power adapter, and a micro USB to USB flat cable that I've orderd. I ordered a flat one so it can go behind the tablet without being very visible. So once I have cleared a path for the cord and put it together, I'll run the cord from the wall to the hole in the door, and staple it along the edges everywhere in between so it's not in the way. Finally, I'll mount a TPU case on the top part of the door by drilling holes and screwing it in, securing it with hex fasteners on the other side of the door. I've included a simple MS Paint rough draft of what the finished product will look like.
The idea is that it will be mounted on the door, the cords won't be visible, and it will always be connected to a power source (unless I remove it temporarily). I'm not too worried about frying the battery since there are not many instances that would require me to remove it from power so as to rely on the battery. I hate to be so OCD but visible cords are a bit of a bother to me. However, if you have any ideas as to how I may hide them with the method you mentioned I'd be happy to hear them since your method sounds far easier and less destructive, and probably an all around better option if it weren't for those pesky cords! Also, since my tablet hasn't arrived yet I can't check this for myself: (if you have the same tablet) does the Galaxy Tab 3 7.0 have NFC capabilities? I couldn't find anything saying it did, but I couldn't find anything saying it didn't either. If so, I'd put an NFC sticker on the inside of the case and create a set of tasks in Tasker so that when I put it in its home it goes into "Kitchen Mode". Anyway, thanks for all your help and suggestions, and whatever I end up doing I will definitely post a few pics to show it off!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Super Sam Galaxy said:
That sounds like a fantastic way to do it. I was very uneasy about magnets because of two things: the first is that I was afraid they would separate and the other is that I thought I'd need magnets so strong they may damage the tablet. Gorilla gluing them to a case is perfect because it's strong, doesn't damage the tablet, and doesn't require ridiculously strong magnets like I'd need if I had something like a metal plate inside the tablet that the magnets would need to stick to. I wish I'd seen this post a few days ago, because as it turns out I have already started another plan, which I've already ordered the parts for, but I'm strongly considering cancelling my order to give your method a try. The one thing that makes me hesitate is that with the new plan, I've come up with a way to hide the cord, whereas I was unable to think of a way to do this when it's on the fridge.
Here's what I put together: I have a cabinet directly on the left of my stove (as opposed to the fridge which is directly to the right of it). The cabinet starts about a foot and a half off the ground and comes up to about my neck. The idea is to mount it on the cabinet door and hide the cord in the cabinet, and the specifics are as follows. There's no power source inside the cabinet, so I was going to drill an extension cord sized hole in the back base of the cabinet to slip an extension cord into. Then I'd drill another (smaller) hole in the door for the micro USB end of the charging cable. Next, I'd put the power cable together, and it consists of 3 parts. The extension cord, a USB-to-power adapter, and a micro USB to USB flat cable that I've orderd. I ordered a flat one so it can go behind the tablet without being very visible. So once I have cleared a path for the cord and put it together, I'll run the cord from the wall to the hole in the door, and staple it along the edges everywhere in between so it's not in the way. Finally, I'll mount a TPU case on the top part of the door by drilling holes and screwing it in, securing it with hex fasteners on the other side of the door. I've included a simple MS Paint rough draft of what the finished product will look like.
The idea is that it will be mounted on the door, the cords won't be visible, and it will always be connected to a power source (unless I remove it temporarily). I'm not too worried about frying the battery since there are not many instances that would require me to remove it from power so as to rely on the battery. I hate to be so OCD but visible cords are a bit of a bother to me. However, if you have any ideas as to how I may hide them with the method you mentioned I'd be happy to hear them since your method sounds far easier and less destructive, and probably an all around better option if it weren't for those pesky cords! Also, since my tablet hasn't arrived yet I can't check this for myself: (if you have the same tablet) does the Galaxy Tab 3 7.0 have NFC capabilities? I couldn't find anything saying it did, but I couldn't find anything saying it didn't either. If so, I'd put an NFC sticker on the inside of the case and create a set of tasks in Tasker so that when I put it in its home it goes into "Kitchen Mode". Anyway, thanks for all your help and suggestions, and whatever I end up doing I will definitely post a few pics to show it off!
Yes.. I can see that fastening a tpu case to the cabinet door would work out good... and hiding your cord is a neet way too... too bad that your cabinet door will have to have a huge hole it it behind the Tab...
Maybe mount the TPU closer to the edge and run the Micro USB out of the tab, and a U-turn BEHIND the cabinet door instead of thru it.. your tab will be off center from the cabinet door... but and now remember... it's stuck there. when you pull your tab out.. you'll have an empty TPU case with 4 screws hanging on your cabinet door.
Ive seen stick on magnet strips here about 1"X4".. peel and stick.... I think 4 of those on a TPU case... perfect.. cause you can snatch it off the fridge anytime. carry it away.. stick it to the stove hood..... anywhere.... screwing to a door is semi permanant.. .. Ill go so far as to suggest 2 TPU's... one magnets on the back.. and 1 screwed to the cabinet door.
Subscribe to this thread and it will notify you of replies immediately....
good luck.. keep the ideas comming...
by the way... I thought we were talking about the 8 inch tab3 not the 7,,,,, my bad... I have an 8 incher
Click to expand...
Click to collapse
jimmbomb said:
Super Sam Galaxy said:
That sounds like a fantastic way to do it. I was very uneasy about magnets because of two things: the first is that I was afraid they would separate and the other is that I thought I'd need magnets so strong they may damage the tablet. Gorilla gluing them to a case is perfect because it's strong, doesn't damage the tablet, and doesn't require ridiculously strong magnets like I'd need if I had something like a metal plate inside the tablet that the magnets would need to stick to. I wish I'd seen this post a few days ago, because as it turns out I have already started another plan, which I've already ordered the parts for, but I'm strongly considering cancelling my order to give your method a try. The one thing that makes me hesitate is that with the new plan, I've come up with a way to hide the cord, whereas I was unable to think of a way to do this when it's on the fridge.
Here's what I put together: I have a cabinet directly on the left of my stove (as opposed to the fridge which is directly to the right of it). The cabinet starts about a foot and a half off the ground and comes up to about my neck. The idea is to mount it on the cabinet door and hide the cord in the cabinet, and the specifics are as follows. There's no power source inside the cabinet, so I was going to drill an extension cord sized hole in the back base of the cabinet to slip an extension cord into. Then I'd drill another (smaller) hole in the door for the micro USB end of the charging cable. Next, I'd put the power cable together, and it consists of 3 parts. The extension cord, a USB-to-power adapter, and a micro USB to USB flat cable that I've orderd. I ordered a flat one so it can go behind the tablet without being very visible. So once I have cleared a path for the cord and put it together, I'll run the cord from the wall to the hole in the door, and staple it along the edges everywhere in between so it's not in the way. Finally, I'll mount a TPU case on the top part of the door by drilling holes and screwing it in, securing it with hex fasteners on the other side of the door. I've included a simple MS Paint rough draft of what the finished product will look like.
The idea is that it will be mounted on the door, the cords won't be visible, and it will always be connected to a power source (unless I remove it temporarily). I'm not too worried about frying the battery since there are not many instances that would require me to remove it from power so as to rely on the battery. I hate to be so OCD but visible cords are a bit of a bother to me. However, if you have any ideas as to how I may hide them with the method you mentioned I'd be happy to hear them since your method sounds far easier and less destructive, and probably an all around better option if it weren't for those pesky cords! Also, since my tablet hasn't arrived yet I can't check this for myself: (if you have the same tablet) does the Galaxy Tab 3 7.0 have NFC capabilities? I couldn't find anything saying it did, but I couldn't find anything saying it didn't either. If so, I'd put an NFC sticker on the inside of the case and create a set of tasks in Tasker so that when I put it in its home it goes into "Kitchen Mode". Anyway, thanks for all your help and suggestions, and whatever I end up doing I will definitely post a few pics to show it off!
Yes.. I can see that fastening a tpu case to the cabinet door would work out good... and hiding your cord is a neet way too... too bad that your cabinet door will have to have a huge hole it it behind the Tab...
Maybe mount the TPU closer to the edge and run the Micro USB out of the tab, and a U-turn BEHIND the cabinet door instead of thru it.. your tab will be off center from the cabinet door... but and now remember... it's stuck there. when you pull your tab out.. you'll have an empty TPU case with 4 screws hanging on your cabinet door.
Ive seen stick on magnet strips here about 1"X4".. peel and stick.... I think 4 of those on a TPU case... perfect.. cause you can snatch it off the fridge anytime. carry it away.. stick it to the stove hood..... anywhere.... screwing to a door is semi permanant.. .. Ill go so far as to suggest 2 TPU's... one magnets on the back.. and 1 screwed to the cabinet door.
Subscribe to this thread and it will notify you of replies immediately....
good luck.. keep the ideas comming...
by the way... I thought we were talking about the 8 inch tab3 not the 7,,,,, my bad... I have an 8 incher
Click to expand...
Click to collapse
I do like the fact that your way doesn't involve destroying parts of my kitchen! I'm thinking now that if I find a way to fasten the USB cable to the fridge in a semi-permanent manner it may not be so bad... The cord is white, like the fridge, and with it being flat it may be less noticeable. I wonder how it would hold up with the door being open and closed, as in whether or not it would slide/fall from the repeated movement... This is going to be a tougher decision than I initially thought! At least there's time to figure it out, the tablet won't be here for like 2 months.
Click to expand...
Click to collapse
ill get me some stick on magnets soon and stick them to my TPU and test it out.
Ill post the results..
How come yours wont come in for 2 months? and are you getting the 7" or the 8"
Ive seen the tab3 -7"incher at Best Buy last weekend for only 49$$ but they want you to contract up on a data plan..
WEAK!!!!... I pull my ATT go phone sim out of my phone and jam it into my 315 and BAM!!! an 8" Galaxy phone with data, mms, and voice calls!!!
good luck
jimmbomb said:
ill get me some stick on magnets soon and stick them to my TPU and test it out.
Ill post the results..
How come yours wont come in for 2 months? and are you getting the 7" or the 8"
Ive seen the tab3 -7"incher at Best Buy last weekend for only 49$$ but they want you to contract up on a data plan..
WEAK!!!!... I pull my ATT go phone sim out of my phone and jam it into my 315 and BAM!!! an 8" Galaxy phone with data, mms, and voice calls!!!
good luck
Click to expand...
Click to collapse
Please do post results! Sorry I didn't see the reply again, I did subscribe to the thread but I must have missed the email... now it's been a while! Anyway, the 2 month period is just one of the hoops TWC makes you go through to get something free. It will be the 7 inch tablet. I am actually on the phone with them now trying to get them to honor their agreement and it's like pulling teeth. But they are either going to give me a tablet or I'm not going to pay my bill for the next 3 months to make up the difference and I'll buy my own damn tablet! Anyway, I intend to post photos when it's done. I've got everything set up, I just need a table to go in the TPU case.
UPDATE: Just got off the phone with TWC after an hour and 36 minutes, and they told me that they are going to "pass my details to the correct department" and I'd get a call within "3-4 days". Funny, as I pointed out, that was the same thing they told me 8 days ago, after another equally long phone conversation. Anyway, to sum it up they are giving me a credit equal in value to the tablet and I'm debating between the Galaxy Tab 3 (7 inch), which was what the promotion originally offered, or the 2013 Nexus 7. The Nexus has gotten great reviews, is there anything about the Galaxy Tab that you'd recommend over the Nexus? I know I'm kind of getting off track here but I'm just curious.
Super Sam Galaxy said:
Please do post results! Sorry I didn't see the reply again, I did subscribe to the thread but I must have missed the email... now it's been a while! Anyway, the 2 month period is just one of the hoops TWC makes you go through to get something free. It will be the 7 inch tablet. I am actually on the phone with them now trying to get them to honor their agreement and it's like pulling teeth. But they are either going to give me a tablet or I'm not going to pay my bill for the next 3 months to make up the difference and I'll buy my own damn tablet! Anyway, I intend to post photos when it's done. I've got everything set up, I just need a table to go in the TPU case.
Click to expand...
Click to collapse
well... after you vacated the thread, I figured you lost interest or just decided to drill holes in your cabinet door..
So, I didnt get any magnets.. BUT I will get them this weekend.. maybe tomorrow... Id like to shoot a video of it stuck to the fridge while opening anf closing... how to post it though??
jimmbomb said:
well... after you vacated the thread, I figured you lost interest or just decided to drill holes in your cabinet door..
So, I didnt get any magnets.. BUT I will get them this weekend.. maybe tomorrow... Id like to shoot a video of it stuck to the fridge while opening anf closing... how to post it though??
Click to expand...
Click to collapse
Perhaps upload to Youtube and send a link? Anyway, don't worry about it if it's a bother, but if you get a chance I'd be interested to see. I'll try to keep up with the thread better!
jimmbomb said:
well... after you vacated the thread, I figured you lost interest or just decided to drill holes in your cabinet door..
So, I didnt get any magnets.. BUT I will get them this weekend.. maybe tomorrow... Id like to shoot a video of it stuck to the fridge while opening anf closing... how to post it though??
Click to expand...
Click to collapse
Also, here's a photo of the finished product (pending insertion of tablet). Let me know what you think.
Super Sam Galaxy said:
Also, here's a photo of the finished product (pending insertion of tablet). Let me know what you think.
Click to expand...
Click to collapse
well that looks pretty cool, now that sits right in the middle of your cabinet door? How did you mount the case to the door, I don't see any screws on the backside of the case that went through the cabinet door with I'm guessing nuts on the other side..I will look for the magnets today at to hardware stores on the way home from work
jimmbomb said:
well that looks pretty cool, now that sits right in the middle of your cabinet door? How did you mount the case to the door, I don't see any screws on the backside of the case that went through the cabinet door with I'm guessing nuts on the other side..I will look for the magnets today at to hardware stores on the way home from work
Click to expand...
Click to collapse
Thanks! It's actually a flip-cover case, so the screws are in the cover part, which is flipped over behind it. then I drilled a small hole for the micro USB cable and ran that along the edge of the inside of the cabinet. Now that I'm debating getting a Nexus 7 instead (TWC just gave me a credit to my account in the amount of the tablet, so I have up to $200 to go toward any tablet I want at this point) I'm considering using a wireless charging pad so all I have to do is place the tablet in the case, though not sure if that would work through a case. Still playing with ideas, and if I do the Nexus 7 then I'll need a new case, but thankfully, they're cheap!
Super Sam Galaxy said:
Thanks! It's actually a flip-cover case, so the screws are in the cover part, which is flipped over behind it. then I drilled a small hole for the micro USB cable and ran that along the edge of the inside of the cabinet. Now that I'm debating getting a Nexus 7 instead (TWC just gave me a credit to my account in the amount of the tablet, so I have up to $200 to go toward any tablet I want at this point) I'm considering using a wireless charging pad so all I have to do is place the tablet in the case, though not sure if that would work through a case. Still playing with ideas, and if I do the Nexus 7 then I'll need a new case, but thankfully, they're cheap!
Click to expand...
Click to collapse
Ok... lets try this...
https://www.youtube.com/watch?v=5jD25aOvicI&feature=youtube_gdata_player
Now, my fridge finish is textured and not smooth. Kind of like a course orange peel,
So I think the grip was not as strong as if it were a smooth surface. If I were to keep this, I would go with a 1 inch wide magnet instead of a half inch which was $1.59 for 30 inches X 1/2".
Good luck!
jimmbomb said:
Ok... lets try this...
https://www.youtube.com/watch?v=5jD25aOvicI&feature=youtube_gdata_player
Now, my fridge finish is textured and not smooth. Kind of like a course orange peel,
So I think the grip was not as strong as if it were a smooth surface. If I were to keep this, I would go with a 1 inch wide magnet instead of a half inch which was $1.59 for 30 inches X 1/2".
Good luck!
Click to expand...
Click to collapse
Looks great! When you say the grip isn't as strong, I'm wondering, did it slide at all when you opened and shut the door? I didn't see any movement the first time you shut the fridge door and it didn't seem to be in a noticeably different location so I couldn't tell if it did, but that's my primary concern with the magnet method, so if it stays in place then that looks like a perfect solution.
On another topic, what app are you using for the dialer? As I understand it (correct me if I'm wrong), the tablet itself does not come with a dialer, and that was something I was planning on looking into down the road - particularly one that can be used with Google Voice. So my questions are 1) what is the name of the app and 2) does it allow Google Voice capabilities? I know that Google Voice is going to disable third party apps that use its service in a few months, but in the mean time it would be cool to use it to make calls.
Anyway, thanks for taking the time to make the video, and I really like how you have it set up.
Super Sam Galaxy said:
Looks great! When you say the grip isn't as strong, I'm wondering, did it slide at all when you opened and shut the door? I didn't see any movement the first time you shut the fridge door and it didn't seem to be in a noticeably different location so I couldn't tell if it did, but that's my primary concern with the magnet method, so if it stays in place then that looks like a perfect solution.
On another topic, what app are you using for the dialer? As I understand it (correct me if I'm wrong), the tablet itself does not come with a dialer, and that was something I was planning on looking into down the road - particularly one that can be used with Google Voice. So my questions are 1) what is the name of the app and 2) does it allow Google Voice capabilities? I know that Google Voice is going to disable third party apps that use its service in a few months, but in the mean time it would be cool to use it to make calls.
Anyway, thanks for taking the time to make the video, and I really like how you have it set up.
Click to expand...
Click to collapse
Like I said that my fridge has a textured finish, so the mags were not getting a solid grip.
It DID stay up there. I even shut the fridge door hard once to test it, but, I'm suspicious, so IF,
IF, I were to do this set up on MY fridge, I would double up on the mag area. & yes, It did NOT move when I had it, just that I wouldnt do it full time without doubling up on the mag area..
My SM-T315 8" Tab came with the Samsung dialer installed.. ya see... It's actually an 8 inch galaxy phone.
Does everything the phones do just in a larger screen.
It has a sim card slot... I take the sim out of my smaller phone (ATT) and slide the sim into the tab 3 8" and BAM!!! The tab is now my phone...
Phone , data plan, mms, everything now comes to the tab with my same number. No need for google voice.
it cost a bit more than the wifi only ones sold at the brick and mortars here in the USA, but, I like the phone and mms features.
good luck
Good luck..
jimmbomb said:
Like I said that my fridge has a textured finish, so the mags were not getting a solid grip.
It DID stay up there. I even shut the fridge door hard once to test it, but, I'm suspicious, so IF,
IF, I were to do this set up on MY fridge, I would double up on the mag area. & yes, It did NOT move when I had it, just that I wouldnt do it full time without doubling up on the mag area..
My SM-T315 8" Tab came with the Samsung dialer installed.. ya see... It's actually an 8 inch galaxy phone.
Does everything the phones do just in a larger screen.
It has a sim card slot... I take the sim out of my smaller phone (ATT) and slide the sim into the tab 3 8" and BAM!!! The tab is now my phone...
Phone , data plan, mms, everything now comes to the tab with my same number. No need for google voice.
it cost a bit more than the wifi only ones sold at the brick and mortars here in the USA, but, I like the phone and mms features.
good luck
Good luck..
Click to expand...
Click to collapse
That's nice that it works as a phone out of the box. I use Google Voice as my primary number, which is a pain sometimes, but I like the fact that I can answer it from my mobile, my home phone and my computer, and when I call out from any of those it also shows the Google Voice number on caller ID to the person I'm calling (for the home phone, this is through Ooma Telo). Wish I could have the tablet work the same way in case it's closer when the phone rings. Did you have to order that through a special online service, or can you find that version on Amazon?
Super Sam Galaxy said:
That's nice that it works as a phone out of the box. I use Google Voice as my primary number, which is a pain sometimes, but I like the fact that I can answer it from my mobile, my home phone and my computer, and when I call out from any of those it also shows the Google Voice number on caller ID to the person I'm calling (for the home phone, this is through Ooma Telo). Wish I could have the tablet work the same way in case it's closer when the phone rings. Did you have to order that through a special online service, or can you find that version on Amazon?
Click to expand...
Click to collapse
Maybe not Amazon.. I know they had the 311 which is the same but NON-LTE.... E bay has a bunch..
I got mine and all my international stuff from Negri Electronics. They operate in Las Vegas. Very good store and after the sale customer relations.
good luck deciding now.
jimmbomb said:
Maybe not Amazon.. I know they had the 311 which is the same but NON-LTE.... E bay has a bunch..
I got mine and all my international stuff from Negri Electronics. They operate in Las Vegas. Very good store and after the sale customer relations.
good luck deciding now.
Click to expand...
Click to collapse
Thanks!
The nexus is a newer version of android but the galaxy has a SD card slot. A big plus in my mind.
Sent from my SM-T210 using XDA Premium 4 mobile app
Latheman said:
The nexus is a newer version of android but the galaxy has a SD card slot. A big plus in my mind.
Sent from my SM-T210 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I agree that removable storage is nice, but I wouldn't say it's a deal breaker for me because of the fact that I can get something like a Meenova to easily add more storage if I need to. At this point I'm leaning toward the Nexus because for this purpose, wireless charging capability seems more beneficial than removable storage simply due to the fact that it would be cool to not have a cord showing when it's mounted, and to not have to plug it/unplug it every time I want to take it down for a bit. Of course, the flip side is that instead of seeing a cord, I'd see the Meenova sticking out of it, but that doesn't seem as bad since I probably wouldn't need to have one in there all the time. Either way, I do appreciate the suggestion and I will certainly take into account the capability for removable storage when making my choice. Thanks!