JUST ANOTHER AOSP BUILD!
This is an AOSP Build of 4.0.3 I have made basically no changes as of right now. I have fixed tethering and market restore. I plan to add some useful modifications in the future.
Gapps-403_signed.zip
md5sum cf82c67056c31101cfed0f936cac29c1
Gorilla-toro_AOSP_v1.1.zip
md5sum 9ce8af2122bd743862c0aa6d49bed97d
Full wipe if coming from any other ROM. Especially if they have made framework changes.
Use my gapps if you want to make sure market restore works. These are the same as the latest that are floating around I just included google backup transport apk in mine.
Google Wallet - download the unmodified apk. Install as usual after full wipe. Seems to work, I haven't used it recently though.
Kernel - Stock for now.
Also I can't check any of the NFC stuff because I don't know anyone else with an NFC enabled phone.
Big thanks to everyone as usual, CM Team, RootzWiki, RootzBoat, Birdman, Pete of Bugless Beast fame, I looked at all of their vendor make files to figure out how to set those up.
Source Code: Google AOSP 4.0.3 Master Branch - my changes will uploaded tonight when I get off work to my github.
Post any issues that you notice. I don't expect many though since it is currently a pure AOSP build.
MD5 Sums are correct now.
Facebook Sync fixed, added reboot recovery menu.
Google wallet works. Do a fresh install of Google Wallet after wiping.
I am working on the camera panorama mode.
Reserved one more time
Post on Rootzwiki?
I shall later today. I want to get my source uploaded to my github. Otherwise I will get hear a lot of whining..as in source, source, source..... Just here for now. Upload there tonight or in the morning.
Thanks for this. I've been looking for a mostly-stock 4.0.3 ROM.
This is EXACTLY what I have been looking for! Thank you!
My only reservation is that I really don't want to wipe my device as I've only recently got everything sorted the way I wanted it on my phone. Is there a quick and dirty way to unlock the tethering capabilities with ADB or Root Explorer? Or is that part of the framework that would have to be properly flashed with the installation of a new ROM like this one?
It is part of the Frameworks. It is built into the system. There is no quick and dirty way. You could do a titanium back up and restore everything after the flash. The changes are minimal and should not affect anything from another build. I suppose there could be problems if you restore from 4.02 to 4.03 but you can always Nandroid and try it if you like.
Going to post an update today. It will have working FB sync and a file manager built in from CM otherwise no changes.
do i install this with CWM? can someone tell me how to install this?
I'll be checking this one out soon, been waiting for an all stock 4.0.3
A couple quick questions:
Is it rooted?
Does it have busybox?
Is it deodexed?
On a side note, the md5sums you have listed, are the same for both files
Does anyone else get a force close when using panorama mode in the camera?
Sent from my Galaxy Nexus using xda premium
jimmytinsnips said:
Does anyone else get a force close when using panorama mode in the camera?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I sure do. Tried to fix permissions to see if that would help to no avail.
Can you rent and watch movies from the market? Each rom I try, it seems either tethering is unlocked, or you can rent and watch movies. I would love a rom where I can do both.
I am now working on Panorama mode. Just found that it force closes, because I never use it. The current release has the Facebook fix, thanks to team kang, also I added in a reboot recovery menu. Otherwise it is stock with working tethering.
I will let you know when I see why panaorma isn't working.
Thanks. I don't use Panorama much, but it's nice to have the feature available.
I will post an update to fix the camera it is simply due to a couple of missing libs that I didn't add to the extract.sh script. I will also fix it and post the updated rom tonight. I am not sure about movies from the market. I think that has something to do with rooted devices and googles agreements with the copyright holders. Probably due to piracy concerns.
Let me know if you notice any other bugs. There really shouldn't be many since it is basically a pure AOSP build.
Gr8gorilla said:
I will post an update to fix the camera it is simply due to a couple of missing libs that I didn't add to the extract.sh script. I will also fix it and post the updated rom tonight. I am not sure about movies from the market. I think that has something to do with rooted devices and googles agreements with the copyright holders. Probably due to piracy concerns.
Let me know if you notice any other bugs. There really shouldn't be many since it is basically a pure AOSP build.
Click to expand...
Click to collapse
While you're fixing the panoramic camera, would you be able (and willing) to add back the original live wallpapers and ringtones? Or if not in the build itself, perhaps a separate flashable zip file that would add them back? I tried (and failed) to modify your ROM with these original files added back in and, of course, I only got a bootloop.
If you need the files, I can adb pull them for you and zip them up easily.
Thanks again for your awesome ROM.
j.bruha said:
While you're fixing the panoramic camera, would you be able (and willing) to add back the original live wallpapers and ringtones? Or if not in the build itself, perhaps a separate flashable zip file that would add them back? I tried (and failed) to modify your ROM with these original files added back in and, of course, I only got a bootloop.
If you need the files, I can adb pull them for you and zip them up easily.
Thanks again for your awesome ROM.
Click to expand...
Click to collapse
Sure, no problem. Zip them up and upload them to dropbox or multiupload or something and I will fix it up over the weekend.
Also, Sorry for the delay on teh camera fix. I have just been extremely busy with a project that is a few days past deadline at work. Unfortunately, real life has to come first....
Flashed the update...lost my camera completely...
Sent from my Galaxy Nexus using xda premium
Wow, that's Crazy. Sorry I have not been maintaining the thread here. School has me so busy I just don't have the time right now. I am in a Physics Class, Electricity, Electromagnetism, and fiberoptics. And at the same time in an advanced Computer Science Class with 4 hours of Elective Classes....Kinda busy....
Related
Hey Guys,
Figured I would share this with you all.
What this is:
AOSP 4.0.3
VZW OTA (4.0.3) Build props
What this has:
Vzw tethering guard disabled
facebook sync fix - Thanks Roman
Reboot menu with screen shot in power menu (Thanks syaoran)
Toggles on drop down for things (Thanks cm team for this commit)
su - Root
Fully working wallet (Get the hacked APK)
Thanks to anyone i have forgot.
Rom:
http://aospdev.com/rhcp/rhcp-final-r4-1.zip - NFC TAGS fixed! Facebook sync should work 100% in this build too - Auto brightness hack added (special request)
Flash this in clockwork and a FULL WIPE is needed. (If you are using my rom, You should not have to wipe.)
I have posted my changes on github for people who would like to contribute or perhaps add/fix/change things.
Here is the github Link: https://github.com/rhcp011235
I will take any pull requests you guys want. I cannot promise i will accept them Since, This rom is for ME But, feel free and perhaps we can work this out
Change Log R1:
Added T9 dialer - Thanks CM
added a few tweaks
New Imo 1.3 kernel - Thanks IMO
some brightness hacks
Change Log R2:
Full re-work of src on the git. Many things automated now.
Root / Superuser built in.
VZW Apps working (VZW nfl mobile / myvzw) with aosp tether still working
Languages removed per request so no keyboard logo shows
Stock un-secured kernel. (You can flash whatever one you want)
R3:
Want to know the changes from now on. Read the github commits. I am not doing changelogs anymore.
The major addon here is 4G toggle / Lockscreen
Working Wallet: http://www.multiupload.com/CPVXPXF6VH
Gapps 4.0.3 http://aospdev.com/rhcp/gapps-ics-403-Kejar31-122711.zip Thanks kajar.
CM7 RingTones http://aospdev.com/rhcp/ring_cm7.zip - Thanks CM team. By request I have added a flashable zip which will give you all the CM7 ringtones and audio.
Samsung Stock Ringtones http://aospdev.com/rhcp/ring.zip - These will wipe all STOCK (ICS) Ringtones and add the samsung (VZW ONES)
i want to try this but im scared to mess up wallet. i already got secure element and needed a new phone. if i wipe and install your rom which includes wallet what should i do? restore my backup with wallet or what?
qman66 said:
i want to try this but im scared to mess up wallet. i already got secure element and needed a new phone. if i wipe and install your rom which includes wallet what should i do? restore my backup with wallet or what?
Click to expand...
Click to collapse
Yes, restore your wallet that works. The AOSP wallet does not work.
You need the hacked Wallet.
Which is: http://www.multiupload.com/CPVXPXF6VH
I backed up and gave this a shot. It seemed to install fine, but I didn't realize I needed gapps as a seperate zip. I'm downloading one now that I'm going to try. If apps update I'll be pretty happy. Can I restore app data from a 402 rom?
I'm really looking forward to 403, but I'm worried about committing to a rom before the OTA is out to base it on.
Edit: The gapps installed, but market force closes when I try to install dropbox so I can install titanium... I think I'm going to go back to 402 for now.
TheTomas said:
I backed up and gave this a shot. It seemed to install fine, but I didn't realize I needed gapps as a seperate zip. I'm downloading one now that I'm going to try. If apps update I'll be pretty happy. Can I restore app data from a 402 rom?
I'm really looking forward to 403, but I'm worried about committing to a rom before the OTA is out to base it on.
Click to expand...
Click to collapse
I would not restore things from 4.02 to 4.03.
This is a very stable 4.0.3 rom with working wallet and everything working.
TheTomas said:
I backed up and gave this a shot. It seemed to install fine, but I didn't realize I needed gapps as a seperate zip. I'm downloading one now that I'm going to try. If apps update I'll be pretty happy. Can I restore app data from a 402 rom?
I'm really looking forward to 403, but I'm worried about committing to a rom before the OTA is out to base it on.
Edit: The gapps installed, but market force closes when I try to install dropbox so I can install titanium... I think I'm going to go back to 402 for now.
Click to expand...
Click to collapse
Make sure you are using gapps for 4.0.3 - GAPPS-ICS-10
Look in the second section. I will link gapps here.
Any info on Imo's kernel?
Could we get the stock kernel as an optional zip install?
TIA
Can anyone confirm the status of formatting NFC tags with this ROM?
Thanks!
okeefferd said:
Can anyone confirm the status of formatting NFC tags with this ROM?
Thanks!
Click to expand...
Click to collapse
NFC works 100% I have used it in mcdo / taxis and other places.
mrZoSo said:
Any info on Imo's kernel?
Could we get the stock kernel as an optional zip install?
TIA
Click to expand...
Click to collapse
Imo's kernel.
Is a OC/UV + GPU OC kernel which i run everyday and he's quite the kernel hacker.
If you guys want. I can include a zip of the orig stock kernel as-well.
how did you build a 4.0.3 ROM without the CDMA binaries? I couldn't find them anywhere
Thanks in advance, this has everything I've been wanting and I'll flash it tonight. One dumb question, does wiping everything erase the sdcard?
Sent from my Galaxy Nexus using Tapatalk
Do the notification toggles work for LTE and the flashlight?
letsgoflyers81 said:
Do the notification toggles work for LTE and the flashlight?
Click to expand...
Click to collapse
No toggles for LTE or flashlight
fubaya said:
Thanks in advance, this has everything I've been wanting and I'll flash it tonight. One dumb question, does wiping everything erase the sdcard?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
If you wipe with clockwork no. If you wipe with fastboot then yes
melterx12 said:
how did you build a 4.0.3 ROM without the CDMA binaries? I couldn't find them anywhere
Click to expand...
Click to collapse
I'm special
rhcp0112345 said:
No toggles for LTE or flashlight
Click to expand...
Click to collapse
Bummer, do you think those could be added? The ROM I'm using now is 4.0.2 which works well enough, I just miss the toggles from CM7. I'm using Widgetsoid which has notification toggles but LTE and flashlight don't work.
letsgoflyers81 said:
Bummer, do you think those could be added? The ROM I'm using now is 4.0.2 which works well enough, I just miss the toggles from CM7. I'm using Widgetsoid which has notification toggles but LTE and flashlight don't work.
Click to expand...
Click to collapse
I may be able to work on it. Trying to get my source up to github before i make any more changes
should your wallet work on other 4.0.3 builds? tried it on bugless beast but didn't work there oddly, other wise rom cool
Sent from my Galaxy Nexus using xda premium
This is very simple the ROM is intended to serve as a ROM for people who are like me who likes the stock ROM but with a little customization, and enjoys the ICS OS without some of the customizations found in the AOSP choices that we have so far. The goal for this is simple, stock, and bugless as a ROM can be and there is no donate button in the ROM. It uses mods and battery saving techniques that I found to work for me, but like I said since this is more of a modded stock ROM I'll keep this intro brief.
Features:
De-odexed
Build.prop tweaks for performance and to perserve battery life
Dalvik Cache moved to cache
Super User (root) and Busy Box
Native Tethering
I also have customized some settings for better user experience (well at least for me). I am keeping this simple so I'll tell you now I like how the stock ROM works so I have not added any of the CM Mods or Kang Mods and probably won't as of now. Also I am not gonna post any screen shots since this is a re-vamp of what you got out of the box and there is no visual customizations added since all of my tweaks are to the apps and settings. ....... anyway take a chance try this out let me know what ya think ...........
Download for today
http://www.mediafire.com/?ws5d7hbdpkjvk3d
or
http://www.4shared.com/zip/DIdXuE7p/Icee_Modz_1_0_6_051312.html
As always make sure you know how to flash a ROM before using this or you may encounter problems or even brick your device please follow these instructions:
1: Factory reset data and system wipe
2: Wipe cache
3: Install ROM .zip file
4: Reboot
To ensure that you get the best out of my preset customizations don't sign into google services when you setup the ROM you can always do this later, try the rom out as is to put it to the test before you add your customizations and settings to it.
ENJOY
JD
NOTE: The Google Apps provided in this ROM is to be only used with the Sprint branded variant of the Galaxy Nexus and not to be redistributed to any other device not licensed to Sprint or not a Sprint variant Galaxy Nexus, the Google Apps are the property of GOOGLE and should be respected as such and if need be I will demolish all links to Google property should I be asked to.
Change Log
050412:
Initial release for Jakd-Modz 3
rom 3.0.8
Changed the name to Icee_Modz
ROM allows native tethering (at least thru USB thats all I tested)
Updated:
Maps
GoogleEarth
Street
GooglePlus
GoogleVoice
wallet
Lock Screen rotation is enabled
I'll try it when I get home.
Sent from my Galaxy Nexus
Does the compass work properly with this?
peabody42 said:
Does the compass work properly with this?
Click to expand...
Click to collapse
I don't see why it wouldn't
Not sure what you do with these ROMS but they are fast smooth and bugless like you state. Only issue I have on this version is MMS won't send. Had this problem on another earlier build also can't do a PRL or Profile update. Not sure why not though I have flashed wiped and reflashed like always but jo go.
GN Sent
ifly4vamerica said:
Not sure what you do with these ROMS but they are fast smooth and bugless like you state. Only issue I have on this version is MMS won't send. Had this problem on another earlier build also can't do a PRL or Profile update. Not sure why not though I have flashed wiped and reflashed like always but jo go.
GN Sent
Click to expand...
Click to collapse
I'll check on that for you and thanks
OK gotta fix mms
Hey sorry was on a plane but I got it fixed. You just need to get the SDM.apk which apparently has the sprint prl and profile update in it. Put that in system, set permissions then reboot update profile and prl and you are golden. If you need the SDM.ak pm me and ill get it to you. Just getting off the plane but can do it when I get home.
Thanks again for this kick a$$ rom, I have tried AOKP and team eos but my phone likes this one the best with franco kernel. I do t use all the fancy stuff the others have so this is erfect.
GN Sent
ifly4vamerica said:
Hey sorry was on a plane but I got it fixed. You just need to get the SDM.apk which apparently has the sprint prl and profile update in it. Put that in system, set permissions then reboot update profile and prl and you are golden. If you need the SDM.ak pm me and ill get it to you. Just getting off the plane but can do it when I get home.
Thanks again for this kick a$$ rom, I have tried AOKP and team eos but my phone likes this one the best with franco kernel. I do t use all the fancy stuff the others have so this is erfect.
GN Sent
Click to expand...
Click to collapse
Yeah I just removed the sdm package because I got tired of the phone wanting to activate every time I flash lol but I'm on my way to Chicago for the weekend and won't get back until Sunday so I will fix this then and thanks for the positive words
No worries man. I got tired of that too. Once I reinstalled it I updated and then froze it with TB. Have a good trip.
GN Sent
Any screenshots?
would try...
jakdillard said:
Build.prop tweaks to perserve battery life
Dalvik Cache moved to cache
Super User (root) and Busy Box
Build.prop tweaks to force better GPU rendering
Zipaligning on boot
Click to expand...
Click to collapse
Thanks for sharing your work. Just to clarify, this is based on the Sprint's as-shipped GN ROM, with the customizations listed above, and Google Apps removed (which can be installed via the separate package you provided).
Is there anything else I'm missing?
What is the MMS issue?
Lastly, what are your customizations?
Cheers.
snovvman said:
Thanks for sharing your work. Just to clarify, this is based on the Sprint's as-shipped GN ROM, with the customizations listed above, and Google Apps removed (which can be installed via the separate package you provided).
Is there anything else I'm missing?
What is the MMS issue?
Lastly, what are your customizations?
Cheers.
Click to expand...
Click to collapse
yep based off sprint shipped and all of googles apps removed and every thing I've done to it is not anything that you will see like a theme or extra options for whatever its all under-the-hood type tweaks, and the mms thing is a fluke on my part because I removed the package that updates your profile to sprint to allow you to send mms.
broad_st_bully said:
Any screenshots?
Click to expand...
Click to collapse
Its just like stock except cleaner so I dont think screens are needed for that ?
jakdillard said:
yep based off sprint shipped and all of googles apps removed and every thing I've done to it is not anything that you will see like a theme or extra options for whatever its all under-the-hood type tweaks, and the mms thing is a fluke on my part because I removed the package that updates your profile to sprint to allow you to send mms.
Click to expand...
Click to collapse
Just to verify--the package is now put back into the ROM? Also, does the separate GApps package put everything back that you took out?
Thanks.
snovvman said:
Just to verify--the package is now put back into the ROM? Also, does the separate GApps package put everything back that you took out?
Thanks.
Click to expand...
Click to collapse
No I'm in the process of rebuilding from scratch and haven't fix that yet. so I'd wait to try this out
Ok did a complete rebuild, the ROM is just like what you get out the box now (I actually like the stock ROM) everything is there just like what you get out of the box I have just did a lot of "under-the-hood" engine tuning, mms works and so does the compass .
Awesome! I am checking this out now but like it simple.
I'm using this thread to share working pdroid patches I've got for various Galaxy Nexus roms. This was made using the patcher being developed here (patcher is in the 4th post). The patcher is currently linux-only, but will also work with cygwin in windows. I'm posting the finished flashable zip here as a convenience to anyone who can't use it themselves. Please note that I am not one of the people actively developing this patcher, just a willing tester who happens to own a toro Gnex.
If you don't know what Pdroid is, this is the thread for it on xda. Basically, it lets you deny permissions to apps on a per-permission basis, without risking apps crashing. Same basic idea as LBE privacy guard, but in my opinion executed better. Plus, open source is always a plus. Even though the official patcher there won't work for us yet, check the official thread. You'll need to download the app from the market and follow the same instructions, just using the zips I'll post here (or make your own).
I'll include a revert.zip for anything I post here, but please note that I take no responsibility for anything that happens to your phone. Make backups before flashing things. Try TWRP if you haven't, it's faster at backup/restore than CWR and does a bunch of other neat stuff like compressed backups and queued zip flashing. Also, in case of things breaking, please note that these revert zips are (1) only going to work if you are running the same rom used to create the zip and (2) just a slimmed down version of the rom's zip. What this means is that if you flash a pdroid zip and you need to revert, the surest thing to do is just re-flash your rom without wiping anything.
I'll try to update this thread as I get more patches working. Here's where my own experiments stand:
Link to my dropbox folder with files, notes below
Working patches:
-AOKP b39 (toro):
-AOKP b39 (maguro):
-CM9 Nightly: Patched build: 2012/06/19
--Note: Not sure if these will automatically fail with later nightlies or only when something relevant is updated in the rom. Feel free to try, just reflash your rom if it bootloops.
-Stock AOSP(+root, busybox): Patched build: 2012/06/02
-Paranoid Android v1.4a
Not Working (Yet):
-Liquidsmooth 1.5RC4:
-Slim ICS 4.0:
Unless otherwise noted, these are all for the toro (verizon) Galaxy Nexus. It's pretty quick and easy for me to make new patches so feel free to request something. But please be aware that sometimes it's a few days between when I can devote any time to this and don't be offended if I don't reply to you right away.
Just to reiterate, all you need to do for this is download the "Pdroid Patch Zip" file for your rom, flash it in recovery, and download Pdroid from Google Play.
Finally, be aware that the first boot after flashing can take a very long time, without any indication like the "Android is Upgrading..." screen. Don't assume it's bootlooping! Seriously, put the phone down and do something else for a bit. Anything in the tested section I've either personally flashed on my phone or someone else reported as working. If you're sure you're getting a bootloop on a clean install, my only advice is to do a full revert to stock and re-unlock/root/etc and see if it works then. Though rare, it is possible for something to be corrupt that persists across the usual "clean install" routine.
Isn't that what Permissions Denied does?
https://play.google.com/store/apps/details?id=com.stericson.permissions
Wow, I didn't realise you could patch AOKP on ICS yet. Have been waiting for this for so long. How would I go about applying your patch for AOKP gsm?
xternal said:
Wow, I didn't realise you could patch AOKP on ICS yet. Have been waiting for this for so long. How would I go about applying your patch for AOKP gsm?
Click to expand...
Click to collapse
For gsm you'd need a new patch. There are instructions in the first thread I linked to if you'd like to try it out. I might make one in a bit since I expect that to be a popular request and I expect it to work.
danger-rat said:
Isn't that what Permissions Denied does?
https://play.google.com/store/apps/details?id=com.stericson.permissions
Click to expand...
Click to collapse
Same idea, different approach. Permissions denied generally causes apps to crash if they need info that they are denied. I also had a major issue with it a while back that I ended up doing a factory reset for, but I think that's been fixed since then.
Not sure how pdroid gets around apps fc'ing (maybe it spoofs data so apps go on running normally? It has an option to set your own values I haven't played with much), but it works very smoothly.
xternal said:
Wow, I didn't realise you could patch AOKP on ICS yet. Have been waiting for this for so long. How would I go about applying your patch for AOKP gsm?
Click to expand...
Click to collapse
Quick update, I put up a maguro for AOKP, and I also updated the OP quite a bit since I last posted. Finally got around to testing the patches I made; getting better at reading the patching process as well to tell when a patch will work before flashing it, too.
At far as updates go, I don't really intend to follow the cm9 nightlies as I don't run them myself. I'll probably continue to try new versions of AOKP and paranoid android as they come out. I'll continue to try the roms that don't patch yet with new versions of the patcher as they are released.
Thank you. The maguro patch works for me.
Edit: not sure, but this likely breaks 2 apps: Listen, Drive.
I've been using LBE Privacy to control permissions and this app doesn't crash apps that have permissions blocked. It's one of their selling points, doesn't crash apps.
deaffob said:
I've been using LBE Privacy to control permissions and this app doesn't crash apps that have permissions blocked. It's one of their selling points, doesn't crash apps.
Click to expand...
Click to collapse
PDroid source has been released, whilst LBE created by a 'suspect' chinese company. I put the suspect in inverted comma's because nothing has actually been proven.
The patch works a treat on GSM aokp, many thanks
edit: looking at it though, it seems it doesn't find all the permissions correctly. I am assuming this is a limitation of the current pdroid as it is not designed for ics.
For instance it does not find hardware controls. Google Drive has access to hardware controls to take photos/videos.
Thanks for the confirmations on the maguro zip, I edited the post to reflect that it's definitely working.
I hadn't heard of LBE before making these threads but from what I've read it seems like people generally prefer pdroid. I'll check it out at some point but it looks like it does a bit more than I'd want it to, and pdroid being open source is definitely a plus.
IIRC, there's certain instances where apps can bypass LBE but not PDroid. I think reboot is one of those times due to when LBE loads.
I've been running LBE but lately the service keeps stopping because it doesn't get root soon enough after boot. Trying this now on Paranoid. Thanks!
i have used this patch for CM9 but after the Bootscreen have i a Blackscreen -.- what can i do?
SGDynamite said:
i have used this patch for CM9 but after the Bootscreen have i a Blackscreen -.- what can i do?
Click to expand...
Click to collapse
I'm guessing you are running a different build/more recent nightly? I might take that link down as it was meant as more of a proof of concept if the cm9 patcher was working and it's unlikely anyone is going to be flashing that particular build just to test pdroid.
The most effective thing would be to just re-flash the original rom's zip, you don't need to wipe anything. The revert zip file is basically just four files copied from a given rom's original zip, services.jar, core.jar and framework.jar in /system/framework, and build.prop in /system.
xternal said:
LBE created by a 'suspect' chinese company. I put the suspect in inverted comma's because nothing has actually been proven.
Click to expand...
Click to collapse
I hadn't heard of pdroid until I was on the Nexus, so I'm not familiar with it to compare, but I'm currently using LBE and blocking its data connections with Droidwall. Perhaps a bit overkill... but works great as far as I can tell.
Sent from my Galaxy Nexus using xda premium
JoeSyr said:
I'm guessing you are running a different build/more recent nightly? I might take that link down as it was meant as more of a proof of concept if the cm9 patcher was working and it's unlikely anyone is going to be flashing that particular build just to test pdroid.
The most effective thing would be to just re-flash the original rom's zip, you don't need to wipe anything. The revert zip file is basically just four files copied from a given rom's original zip, services.jar, core.jar and framework.jar in /system/framework, and build.prop in /system.
Click to expand...
Click to collapse
I think I flashed it to a nightly a day or two after 5-18 and it worked, but it definitely did not work on 5-27 or 5-29.
If the patch doesn't work for you, pull the battery, then hold volume up and down while you hold power, then use volume up and down to get to recovery option--press power to select. Either flash the revert or the old from there on top of the non-working one. Don't clear data partition and you won't lose anything.
@Joesyr, I think there is some interest in CM9 nightly patches...would you mind making a CM9 patch maybe once a week? I haven't had any luck making the patch on my own.
robjective said:
I think I flashed it to a nightly a day or two after 5-18 and it worked, but it definitely did not work on 5-27 or 5-29.
If the patch doesn't work for you, pull the battery, then hold volume up and down while you hold power, then use volume up and down to get to recovery option--press power to select. Either flash the revert or the old from there on top of the non-working one. Don't clear data partition and you won't lose anything.
@Joesyr, I think there is some interest in CM9 nightly patches...would you mind making a CM9 patch maybe once a week? I haven't had any luck making the patch on my own.
Click to expand...
Click to collapse
Well the last cm9 nightly I tried didn't patch at all (I believe it was a 5/29 build). I will try tinkering with things as I get the time but I'm not really at the level of fully understanding these kinds of failures yet.
Next time there's an updated cm9 patch I will try to get a working pdroid zip and I'll consider weekly updates. I'm also generally willing to make these on request as it's a pretty quick process. Fiddling with dropbox links is probably the longest part of any of this.
Any particular issue you're having with the patcher? I've been thinking I could write a little tutorial for getting cygwin up and running since I imagine that for most people the limiting factor is just that they don't have a linux environment to work in. But until I get the time to do that I can help troubleshoot.
Can you make a patch for stock root.
Thx
Has anybody experienced random rebooting? All was fine until I opened a non system app. Then it just started rebooting randomly after opening any app. I ran it on Maguro with AOKP b37.
soloxp said:
Can you make a patch for stock root.
Thx
Click to expand...
Click to collapse
Yup, not sure if the rom I just put up is the same you were looking for but it's the first one I've been able to get to patch correctly with the aosp patch.
Just flashed the Toro AOKP b37 patch, tested and working great here. Thank so much! Awesome work!!
Here is a 4.3 ROM built from AOSP source designed to emulate what a Verizon 4.3 ROM would be like. The changes from AOSP include the addition of GAPPS, addition of Verizon apps, appropriate binaries so everything works, addition of busybox, correct eri.xml, home screen layout to mimic a stock ROM, and the removal of the tethering restriction. The ROM is not pre-rooted, so flash Chainfire's SuperSU if you want root.
As usual, flash at your own risk and post any successes or problems.
Download Link(s) for v4.0: MD5: be4377ab16432112f09d18ae37c91041
DOWNLOAD via Goo.im
Cubby.com MIRROR
SuperSU v1.51 - you may want to check for a more recent version if this link becomes outdated. Flash after you flash the ROM.
Bugs - text-to-speech may not work correctly. Please flash fix attached to this post after flashing the ROM. Thanks AndroJak!
MODS:
Extended Power Menu - CM style
- Ability to reboot, hot reboot, reboot recovery, & reboot bootloader.
- Replaces /system/framework/android.policy.jar
- Thanks to Cyanogenmod and xIC-MACIx
- DOWLOAD
- MIRROR
Thanks to mmuzzy for help building from aosp (fixing t-cdma64 in eri.xml and cell broadcasts menu, plus other stuff I'm probably forgetting), adrynalyne, and djp952 for help building from AOSP.
mwalt2 said:
Here is a stock, rooted, busybox, etc. ROM built from the 4.1.1 AOSP source for Verizon. It has GAPPS included from the GSM developer preview and the Verizon apps as well (MyVerizon and the backup one). My attempt was to make a stock rooted ROM for Verizon based off of the 4.1.1 source on AOSP. Some things are still added to this rom from 4.0.4 IMM76K Verizon ROM, but I did include the new binaries for toro. I haven't fully tested everything, but camera, google now, gps, and wifi all work as expected. I'll try to get some add-on's / mods before too long and have them posted as flashable .zips.
As usual, flash at your own risk and post any successes or problems.
Download Link(s):
about 5 min or so....
Click to expand...
Click to collapse
first cant wait!!! ^.^
Here we go!!!!!
Is Google Now working? I know mmuzzy was having issues on his AOSP ROM. Either way, I'll give 'er a test once the download links are available.
Download for 1 server is ready now. I'll get a mirror up as well.
BrandT90 said:
Is Google Now working? I know mmuzzy was having issues on his AOSP ROM. Either way, I'll give 'er a test once the download links are available.
Click to expand...
Click to collapse
Yes, it's working. I asked it how long a bridge was and it read the answer back to me. I haven't done much more than that though yet.
Downloading. Looking forward to this. Thanks Mwalt for sharing!!!
Quick DL as well. 2 minutes has got to be a new record for a JB rom
BrandT90 said:
Is Google Now working? I know mmuzzy was having issues on his AOSP ROM. Either way, I'll give 'er a test once the download links are available.
Click to expand...
Click to collapse
OP says Google Now is working. I'm downloading now.
excellent. you're a regular johnny on the spot!
downloading now, hope its all good! i'm looking for a "stock jb" style rom of the newest update. ill post my outcome shortly. going to test the basics that are supposed to work.
Is a flash to the JB bootloader recommended? Finally, a build that seems to have all/most components working! No issues with the 4G's or the LTE's?? Lol.
Galaxy Nexus - Slim ICS 4.2
Downloading now. Any thoughts on current JB kernel compatibility?
i wiped data, cache and dalvik cache 2x each, installed and installed trinity kernel on top and hit reboot. (i like trinity for the colors and such, and good battery life ).
first boot took a minute.
updating some apps and gonna test some things.
still getting t-cdma 64 as a carrier
mwalt2 said:
Here is a stock, rooted, busybox, etc. ROM built from the 4.1.1 AOSP source for Verizon. It has GAPPS included from the GSM developer preview and the Verizon apps as well (MyVerizon and the backup one). My attempt was to make a stock rooted ROM for Verizon based off of the 4.1.1 source on AOSP. Some things are still added to this rom from 4.0.4 IMM76K Verizon ROM, but I did include the new binaries for toro. I haven't fully tested everything, but camera, google now, gps, and wifi all work as expected. I'll try to get some add-on's / mods before too long and have them posted as flashable .zips.
As usual, flash at your own risk and post any successes or problems.
Download Link(s):
DOWNLOAD from Dev-Host
MD5: 8383b87cc2f9e5b510807c3034052ffe
Click to expand...
Click to collapse
Any issues in this build? Also, what are the install instructions?
when going to sounds to set ringtones i have a lot of doubles of default ringtones, wonder where i can remove them?
^System/media/ringtones maybe?
Galaxy Nexus - Slim ICS 4.2
works well so far. thanks!
xweaponx said:
Downloading now. Any thoughts on current JB kernel compatibility?
Click to expand...
Click to collapse
I've always used stock, so I can't really comment. Now that source is out, I'd expect the JB kernels to work better.
imablackhat said:
still getting t-cdma 64 as a carrier
Click to expand...
Click to collapse
No sure what causes this, but I've never seen it with this build or the previous developer preview build. Did it happen on first boot before you installed anything else?
tycoon177 said:
Any issues in this build? Also, what are the install instructions?
Click to expand...
Click to collapse
I'd recommend a full factory reset, but people can try what they feel comfortable with. Personally, I did a factory reset, wiped both caches, and then flashed the ROM (with TWRP).
imablackhat said:
when going to sounds to set ringtones i have a lot of doubles of default ringtones, wonder where i can remove them?
Click to expand...
Click to collapse
Do you have any on your sdcard partition in the Ringtones folder? If not, I'd check \system\media\audio path (subfolders for ringtones, alarms, etc). Delete any duplicates you find in there. I don't have any duplicates and there aren't any in the rom.zip I uploaded.
just overwrote mms.apk in system/apps to get the custom pink mms, and got a quick reboot to my boot screen, this never happened on 4.1 roms that weren't source, don't know if this is normal because i replaced the app and it was a one time thing (i hope). as far as going to system/media/ringtones, i see them but there arent any doubles, however theres doubles when i go to select a ringtone from the menu, for everything system related, ringtones and notifications.
What issues have people had? Any boot issues?
I replaced the "stock" keypress ogg files from ics/jelly bean that sound better with this 4.1.1 release, the new key click sounds are horrible. works fine. i used to have t-cdma 64 with any build from 4.1.1 there is a fix that works that ill just apply. its a xml file or something.
I was able to use https://github.com/anestisb/android-prepare-vendor to prepare the vendor images to correctly build AOSP.
I submitted some changes to make it work with Pixel2-XL and they have been merged into main branch.
You have to wipe everything.
I dont know how to make proper zip images for TWRP so use fastboot
I use the fastboot script included in the zip after a full wipe and im all good
Thanks:
anestisb on Github
opengapps
not working:
pixel squeeze
AOSP 8.1 with google apps:
V3:
https://www.androidfilehost.com/?fid=889964283620776051
AOSP 8.1 stock (no gapps):
https://www.androidfilehost.com/?fid=817906626617955840
changelog:
v3:
Jan security update
v2:
updated camera
pixel launcher
updated wallpaper that was causing errors
fixed google setup errors during startup and boot
archive:
v2: https://www.androidfilehost.com/?fid=817906626617955877
V1:
https://www.androidfilehost.com/?fid=745849072291697825
During first boot google setup crashes a bit and I just skip it ...then on reboot I get complaints about stuff. but everything works. so......
deeproot said:
I built AOSP with OpenGapps and all I got was this forum thread
You have to wipe everything.
I dont know how to make proper images so use fastboot
I use the fastboot script included after a full wipe and im all good
Click to expand...
Click to collapse
Link?
Sent from my Pixel 2 XL using Tapatalk
yea, link?
?????
Don't tease us like this, lol. I'll flash anything at this point!
Sent from my Pixel 2 XL using Tapatalk
uplodz complete.
Interesting :good:
I've been doing my best to get my own build running for a few weeks now, and while everything else seems to work perfectly, I can't seem to figure out a way to get it to connect to mobile data. I'd be really interested to hear if there's something in addition to the build instructions provided by Google that you had to do to get it working!
I would just use your build, but my goal is to avoid gapps altogether. Hopefully the trick isn't to have gapps installed
Thanks!
prurigro said:
I've been doing my best to get my own build running for a few weeks now, and while everything else seems to work perfectly, I can't seem to figure out a way to get it to connect to mobile data. I'd be really interested to hear if there's something in addition to the build instructions provided by Google that you had to do to get it working!
I would just use your build, but my goal is to avoid gapps altogether. Hopefully the trick isn't to have gapps installed
Thanks!
Click to expand...
Click to collapse
I thought the whole point of gapps is Google *****es if you build a Rom with google apps installed already...
prurigro said:
I've been doing my best to get my own build running for a few weeks now, and while everything else seems to work perfectly, I can't seem to figure out a way to get it to connect to mobile data. I'd be really interested to hear if there's something in addition to the build instructions provided by Google that you had to do to get it working!
I would just use your build, but my goal is to avoid gapps altogether. Hopefully the trick isn't to have gapps installed
Thanks!
Click to expand...
Click to collapse
u did add in the propietary drivers i assume before u started making ur build?
this build is running smooth! i almost wanna say u couldve left gapps out n let ppl choose which they want to use but of cpurse this is only the beginning.. first thing i did was remove all those google hotword apks that fc, not had any issues yet and u already stated squeeze isnt on here but i nvr used that anyways
I was building from source today but my env has a ways to go before its useable.. it literally took all day to make aosp arm64 eng lol.. started gettin low mem stops towards the end so gonna look at it tom... i actually need to change it up and tweak settings cuz i only got 6gb ram
my set up tho is ur aosp, flash kernel 2.05 and magisk 15.1.. butter.. or shall i say vanilla??
prurigro said:
I've been doing my best to get my own build running for a few weeks now, and while everything else seems to work perfectly, I can't seem to figure out a way to get it to connect to mobile data. I'd be really interested to hear if there's something in addition to the build instructions provided by Google that you had to do to get it working!
I would just use your build, but my goal is to avoid gapps altogether. Hopefully the trick isn't to have gapps installed
Thanks!
Click to expand...
Click to collapse
aosp i dont think includes automatocally.. its runnin android web view n all lol instead of chrome that is
Now, I'm relatively new to the rooting world of Android. Is AOSP essentially custom ROMs? I know this is sort of a "if you don't know, you likely shouldn't be messing with it." I just love tweaking my phone!
So far only the squeeze doesn't work? Should the less advance user hold off until it's been tested a bit? Regardless, thanks for distributing your work to everyone on here! I love this community. Being able to share in the glory that is altering literally almost every aspect of your phone's software.
jgreen077 said:
Now, I'm relatively new to the rooting world of Android. Is AOSP essentially custom ROMs? I know this is sort of a "if you don't know, you likely shouldn't be messing with it." I just love tweaking my phone!
So far only the squeeze doesn't work? Should the less advance user hold off until it's been tested a bit? Regardless, thanks for distributing your work to everyone on here! I love this community. Being able to share in the glory that is altering literally almost every aspect of your phone's software.
Click to expand...
Click to collapse
for u id say hold off.. it works fine for me but it technically is a userdebug build.. AOSP =Android Open Source Project, Its basically Android built from Android source so typically devs can pull the source and make their own roms how they want them. Normally doesnt even have google apps like play store for example.
Its a very clean low lvl android OS and the dev controls every aspect of the build process.. its also been called Vanilla
this technically is "custom" but this initial build doesnt have many tweaks or customizations.. its merely a glimpse as to the possibilities
but hey, try it out if u got the itch, it wont hurt u lol plus the only real way to know the difference is to try it for yourself
jgreen077 said:
Now, I'm relatively new to the rooting world of Android. Is AOSP essentially custom ROMs? I know this is sort of a "if you don't know, you likely shouldn't be messing with it." I just love tweaking my phone!
So far only the squeeze doesn't work? Should the less advance user hold off until it's been tested a bit? Regardless, thanks for distributing your work to everyone on here! I love this community. Being able to share in the glory that is altering literally almost every aspect of your phone's software.
Click to expand...
Click to collapse
for u id say hold off.. it works fine for me but it technically is a userdebug build.. AOSP =Android Open Source Project, Its basically Android built from Android source so typically devs can pull the source and make their own roms how they want them. Normally doesnt even have google apps like play store for example.
Its a very clean low lvl android OS and the dev controls every aspect of the build process.. its also been called Vanilla
this technically is "custom" but this initial build doesnt have many tweaks or customizations.. its merely a glimpse as to the possibilities
but hey, try it out if u got the itch, it wont hurt u lol plus the only real way to know the difference is to try it for yourself
elliwigy said:
for u id say hold off.. it works fine for me but it technically is a userdebug build.. AOSP =Android Open Source Project, Its basically Android built from Android source so typically devs can pull the source and make their own roms how they want them. Normally doesnt even have google apps like play store for example.
Its a very clean low lvl android OS and the dev controls every aspect of the build process.. its also been called Vanilla
this technically is "custom" but this initial build doesnt have many tweaks or customizations.. its merely a glimpse as to the possibilities
but hey, try it out if u got the itch, it wont hurt u lol plus the only real way to know the difference is to try it for yourself
Click to expand...
Click to collapse
Honestly, I'd normally listen and hold off. But since I have a day off I think I'm gonna attempt it just for the sake of learning!
As long as it has the Play Store so I can download the apps I want, I'm good. If I can get all the apps I need to than I'll be a happy camper.
Say later on it's decided I want to go to another AOSP rom, am I going to have to wipe again? If I can get all my apps, won't have to wipe my device every other week, and can get my modules installed I should be good to do some good old fashioned experimentation.
I am not a smart man, at times. I'm gonna try it out. I have a few hours before anyone else is awake. Might as well use that time (un)wisely.
Plus I believe these "vanilla" ROMs, being what they are, can be modded to an even greater extent than the already pretty modifiable "stock" Pixel ones. Please correct me if I'm wrong.
prurigro said:
I've been doing my best to get my own build running for a few weeks now, and while everything else seems to work perfectly, I can't seem to figure out a way to get it to connect to mobile data. I'd be really interested to hear if there's something in addition to the build instructions provided by Google that you had to do to get it working!
I would just use your build, but my goal is to avoid gapps altogether. Hopefully the trick isn't to have gapps installed
Thanks!
Click to expand...
Click to collapse
I found this:
https://github.com/anestisb/android-prepare-vendor
I submitted my changes and they will update in a few days to the add tamien support.
I am going to hold off on this for now, as it's just a shell of what custom Android can be but just wanted to say thank you very much for getting the ball rolling. For giving us hope haha. I check the thread at least 4 times a day and my heart jumped when I saw this post! Good work!
Nice can we flash the Kernels that have been around here for a while on this rom?
patt2k said:
Nice can we flash the Kernels that have been around here for a while on this rom?
Click to expand...
Click to collapse
I flashed Elemental X and finger print stopped working.
deeproot said:
I found this:
https://github.com/anestisb/android-prepare-vendor
I submitted my changes and they will update in a few days to the add tamien support.
Click to expand...
Click to collapse
@deeproot
have you uploaded your WIP android_prepare_vendor anywhere? I would like to clone your changed repo and run this script if possible.
I attempted to manually add your changes in the pull request, but the script is breaking with a debugfs error
Thanks,
Edit: Found it, still getting same debugfs error.
Code:
[*] Extracting '/tmp/android_prepare_vendor.jlQiR6/taimen/opm1.171019.011/taimen-opm1.171019.011-factory-2df1c1cb.zip'
[*] Unzipping 'image-taimen-opm1.171019.011.zip'
[-] Symlinks have not been properly processed from /tmp/android_img_extract.FRWAOM/taimen-opm1.171019.011-factory-2df1c1cb/images/vendor.img.raw
[!] If you don't have a compatible debugfs version, modify 'execute-all.sh' to disable 'USE_DEBUGFS' flag
[-] Factory images data extract failed
[email protected] ~/Desktop/android-prepare-vendor $