It's only been 1 week and the poor quality, flimsy back cover is showing wear and tear. It won't get into its allocated slot, and by the looks of it, seems that it became a fraction shorter.
It always seems click in better for me if I start at the bottom and work up.
TareX said:
It's only been 1 week and the poor quality, flimsy back cover is showing wear and tear. It won't get into its allocated slot, and by the looks of it, seems that it became a fraction shorter.
Click to expand...
Click to collapse
You're not putting it in correctly. Gotta make sure the bottom tabs are before you start snapping the rest. I have more success getting the right tab in first and messing around till the other tab falls in and the bottom of the cover kisses the phone.
My grandma beat me down and took my nexus. Sent from a jitterbug with beats by dre.
SOLVED: Thanks to this guy from androidcentral:
"Originally Posted by DBVille: And, make SURE the hooks aren't bent up. I am betting the hooks have been bent up, at least on one side, from trying to push it closed. (dont ask how I know). Look very closely at the hooks. Put your finger nail under them and pry them up/apart from the back if they are too close to the cover to engage the clips on the phone. When done right, it just snaps on. But, you must get the bottom done first."
The hooks were bent up... fixed them with my nails. Now it snaps back on. Still pretty cheap though.
Or user error?
My grandma beat me down and took my nexus. Sent from a jitterbug with beats by dre.
you're not supposed to snap in the bottom hooks, you lock them in first, then snap in the ones rest...
wonshikee said:
you're not supposed to snap in the bottom hooks, you lock them in first, then snap in the ones rest...
Click to expand...
Click to collapse
+1 this is how I do it...common sense...
Sent from my Galaxy Nexus using XDA App
Happen to me too the first week. I'm a pro now.
Sent from my Galaxy Nexus using xda premium
God, the build quality and camera are a real disappointment on this phone. thanks for the tip on bending up the tabs.. worked for me..
never the OP's fault that he doesnt know how to put the back cover on.. always Samsung's fault for not making it tard proof.
Zepius said:
never the OP's fault he doesnt know how to put the back cover on.. always Samsung's fault for not making tard proof.
Click to expand...
Click to collapse
Admittedly the back cover of the GN is one of the more complicated ones to put back onto the phone.
Do not force it on - if you do it right, it will go back on with just a little pressure. Like others said before you have to start at the bottom latches and work your way up from there. Note that the bottom latches are different from the others and do not snap in like the rest.
I'm extremely pleased with the build quality of this phone! A product feels VERY well build when you can't make it flex slightly or make the battery cover creak by squeasing the phone a certain way! Looking at you, HTC! The DInc, Thunderbolt, and Rezound that I've had all suffered from that. (Though I couldn't make the Thunderbolt flex)
And anytime you drop an HTC phone, first the battery door flies in the air, then the battery pops out -.-
Samsung on the other hand, the Nexus is VERY solid, battery door doesn't creak nor does the frame. No creaking sounds at all. I cannot flex the phone. What is it with people dissing Samsung for making plastic phones, what do you want them to do? Engineer a new compound? Geez
As so many have pointed out, the cover doesn't snap at the bottom; you start there by inserting the bottom hooks, then snap the sides and top.
In fact, I've found the easiest, most effective way to do it is laying out face down, insert the bottom hooks, then zip up both sides together with my thumbs, finishing with effortlessly snapping the top in.
As for the build, I couldn't disagree more strongly. The back design is brilliant. The phone overall is rock solid, and has solved the common back pop-off battery pop-out of most phones today.
Sent from my Galaxy Nexus using xda premium
I was at a Verizon store last night. Picked up the phone from the display they had it in. The back cover fell off along with the security device. Does the cover have issues staying on? Would a case solve this issue?
Tisosview said:
I was at a Verizon store last night. Picked up the phone from the display they had it in. The back cover fell off along with the security device. Does the cover have issues staying on? Would a case solve this issue?
Click to expand...
Click to collapse
There is no issue if you put it on correctly.
Sent from my Galaxy Nexus using Tapatalk
Careful because our store model had a broken back cover since day one. Two sided take is holding it together at the moment.
Tisosview said:
I was at a Verizon store last night. Picked up the phone from the display they had it in. The back cover fell off along with the security device. Does the cover have issues staying on? Would a case solve this issue?
Click to expand...
Click to collapse
Happens at all the stores. Some have ziptied the backcover back on . However, it really is a non issue. In the case of the store phones, the heavy security device that is glued onto the back cover, pulls very hard at the back cover and it creates issues. In reality, given that it is a completely flat piece of plastic that is sitting flush against your phone with no handles, there is no way to exert even remotely the same amount of outward forces on the back cover.
While removing and putting on the backcover doesn't feel great, the cover does a great job, helps keep the phone slim and light, and looks pretty damn good. The store model did put me off due to this same issue with the security device, but I have had absolutely no issues with the backcover, or the phone feeling flimsy (and I came to the GN from the OG!).
LOL the back cover is well built imo. Just because it is thin does not mean it is of poor construction.The people who are having problems just aren't bothering to learn how to put it on. You don't just snap the whole thing on. Put any backcover on incorrectly and you risk damaging it.
I remove my back cover regularly to swap SIMs and although I've had it since release day not only does it look the same as it did when I bought it but it functions perfectly too (stays on nice and tight).
TLDR; If your tabs are bent you're doing it wrong. Don't blame design for your lack of intelligence.
Thank you for the replies. It is reassuring.
I found it funny that the security really didn't work for this device. Since the alarm didn't go off when the back fell off.
Bottom tabs get bent up
I've had my GN for a little over a week. The problem that I have, and I assume the others have, is that the tabs at the bottom get bent up so that they can't hook in.
I bent them down with my fingernail so that they are horizontal again, and it clicked in fine.
My concern is that this is already a problem after a week, and plastic can only take so much bending and fatigue before it totally breaks, which will eventually occur. I would imagine that at least some people who have had their GNs since launch have already experienced this.
Frankly, I think this is a manufacturing issue that Samsung should ultimately address.
Related
Hi all,
I've recently bought a DEFY. It works quite brilliantly and very fast.
I've noticed that the USB rubber cover of my DEFY is not very firm when closed. There is a little seam between it and the phone body, and the seam grows a bit thicker as it approaches the USB port side. I've included some pics of it.
Higher res pics are at
ishuo.de/images/defy1.jpeg
ishuo.de/images/defy2.jpeg
ishuo.de/images/defy3.jpeg
(Sorry I don't have enough permission to directly link pics here.)
I've also spilled some water onto it under a water tap. When I opened it I could see some water drops on the edge of the inner side of the rubber closer to the back.
I don't know whether this is normal or defect and I'm not sure whether it will stay up against water which is one of its great and practical feature.
Can anyone compare it with yours? Are all DEFYs like this?
Thank loads and happy holidays!
Cheers,
Shuo
When I close mine I am careful to press it in firmly as otherwise it looks "not quite shut." It has to squeeze in there. I presume this what's suppose to keep water out and as I have dunked my phone countless times without incident. However, if you think yours is twisted or bulging when seated, I don't think that's right.
Mine doesn't have that small hump when in place. I think there is some extra rubber under the clip.
Sent from my MB525 using XDA App
s.yang said:
Hi all,
I've recently bought a DEFY. It works quite brilliantly and very fast.
I've noticed that the USB rubber cover of my DEFY is not very firm when closed. There is a little seam between it and the phone body, and the seam grows a bit thicker as it approaches the USB port side. I've included some pics of it.
Higher res pics are at
ishuo.de/images/defy1.jpeg
ishuo.de/images/defy2.jpeg
ishuo.de/images/defy3.jpeg
(Sorry I don't have enough permission to directly link pics here.)
I've also spilled some water onto it under a water tap. When I opened it I could see some water drops on the edge of the inner side of the rubber closer to the back.
I don't know whether this is normal or defect and I'm not sure whether it will stay up against water which is one of its great and practical feature.
Can anyone compare it with yours? Are all DEFYs like this?
Thank loads and happy holidays!
Cheers,
Shuo
Click to expand...
Click to collapse
yeah mines got that, you get the bump when the cover gets bent the other way when you move it to get the usb cable in
After charging mine looks like it will stay with the bulge like that when I put the cover back in place, but even so, I can press it firmly, and it actually snaps into place. Sort of even has a clicking sound. I only started noticing this as before I would press it in even, and the bulge would stay there for a while and slowly smooth itself out, but now if I press it in, and then press my thumb/finger all the way around the cover, it snaps into place very tightly.
EDIT - After looking closely at mine I see the hole is actually at an angle, so pressing it in straight would leave it with the bulge. You need to press it against the angle of the phone for it to snap into place.
bobbyphoenix said:
After looking closely at mine I see the hole is actually at an angle, so pressing it in straight would leave it with the bulge. You need to press it against the angle of the phone for it to snap into place.
Click to expand...
Click to collapse
exactly what i was about to say - works for me.
Wow you are so friendly guys.
Thanks lods! I'll look into it when I come back today!
I did get a slight feel of "snap in". Just dunked it shortly into water, and it still lives!
So I guess it's all right.
I get some moisture around the USB plug hole even when the cover is in place as well. Probably not a big deal. You can try using some grease to improve the seal as well.
Sent from my MB525 using XDA App
One review notes a small amount of "O-ring" sealant or grease around the battery cover rim. I supposed you could add a little. Just don't use vasoline, that's a pertroleum product and will degrade certain types of real and synthetic rubber.
Is the battery door cover on anyone's G2 loose? I mean, it used to be a nice tight fit when I first got it, but now after owning it since its release date is seems to be just loose enough to annoy the hell out of me. It doesn't rattle but it slides back & forth just a little bit, maybe a couple millimeters worth. Just curious if this happens to anyone else's G2, and if so what did you do to make it stop doing that.
Thanks.
dustrho said:
Is the battery door cover on anyone's G2 loose? I mean, it used to be a nice tight fit when I first got it, but now after owning it since its release date is seems to be just loose enough to annoy the hell out of me. It doesn't rattle but it slides back & forth just a little bit, maybe a couple millimeters worth. Just curious if this happens to anyone else's G2, and if so what did you do to make it stop doing that.
Thanks.
Click to expand...
Click to collapse
does it fall out? if it dosent, you can try to put something inbetween the gap so the door has no space to move
evilcuber said:
does it fall out? if it dosent, you can try to put something inbetween the gap so the door has no space to move
Click to expand...
Click to collapse
No, it doesn't fall off the phone at all, it's in there pretty good. It slides up & down parallel to the phone itself, so when I'm holding it it just doesn't feel secure (IMO).
Had that problem long ago, it was caused by the phone lock not the cover. I had a replacement and it was locking perfectly again
Sent from my HTC Desire Z using XDA Premium App
Check the tabs on the left side. I noticed that mine got lose also it was from the tabs bending out. Just bend them back in and you should be fine.
Novalis31 said:
Check the tabs on the left side. I noticed that mine got lose also it was from the tabs bending out. Just bend them back in and you should be fine.
Click to expand...
Click to collapse
Which left side are you referring to, the metal clips or the black clips? And which we are you bending them to fix it, toward the center or away from the center? Thanks.
These tabs on the door its self. Just bend slightly and slowly, they will break so be careful.
Novalis31 said:
These tabs on the door its self. Just bend slightly and slowly, they will break so be careful.
Click to expand...
Click to collapse
Which way are you bending them though?
dustrho said:
Which way are you bending them though?
Click to expand...
Click to collapse
In, towards the door.
Remember just slightly. Alittle then try, and so on.
Over all I'm happy with the build quality of my GSM GNex, but it has one minor flaw.
The plastic edge around the screen. Top, Bottom and Right side are perfect and rounded smooth (just like my SGS2), but the left edge i kinda rough and not rounded and smooth like the others. It has a rough feel with a slight sharp feel if you slide your finger over it and makes a "small" rough sound.
Do any of you recognize this? Or is your GNex perfectly smooth like the SGS2?
mine feels uniformly smooth on all sides. one thing i don't like though is dust being trapped in between the said edges and screen. other than that it's flawless
I'm very happy with the build quality on my verizon version.
My only gripe about my GN physically is the rear cover. Just below the camera if you put a small amount of pressure on the cover and then release it, you can hear a slight clicking noise as the cover pops back out.
Other than that, flawless.
My problem .... frigging power button on side of the phone!!! I have to be so careful not to do a screen shoot its just unbelievable ...only other way of switching screen on or off is to hold the phone form top instead resting it on your palm
Sent from my Galaxy Nexus using xda premium
My Gnex is perfectly solid despite having dropped it on tile twice. Yeah, I'm a klutz. There aren't any creaks in it, no popped-up glass, buttons are smooth, no loose or rough joins anywhere.
As I mentioned in another thread, the "flimsy" back cover of the Gnex has an advantage in that it doesn't fly off and let the battery go as well when the phone is dropped. Every smartphone I've ever owned would, when dropped, fly in three different directions when it hit the ground- phone in one direction, back cover in another, battery in another. The Gnex stays in one piece.
Somehow I've only managed to break two phones in my life despite my constant accidental drop testing. Neither of the broken phones was a Samsung (one was a SE X10 dropped into a sinkful of water, the other a BlackBerry dropped on pavement). Admittedly the Samsungs feel a little flimsy next to a lot of high-end phones, but the fact that they are lightweight and plastic actually makes them more durable, IME.
Mine is fine, outside of one extremely annoying issue. The vibrate motor on my unlocked GSM Nexus makes the phone rattle on the bottom right side (obviously where the motor is housed) if I'm not holding the phone on that side. I am normally a vibrate all the time guy...now I only have it vibrate for phone calls because it annoys me so much. I love how powerful and silent the motor is when I'm holding it...(at least compared to my Droid Incredible 2). My Verizon Nexus didn't do this at all before I returned it. Sad.
Lodion said:
My only gripe about my GN physically is the rear cover. Just below the camera if you put a small amount of pressure on the cover and then release it, you can hear a slight clicking noise as the cover pops back out.
Other than that, flawless.
Click to expand...
Click to collapse
Argh, hadn't noticed that before. cannot unhear the clicking noise
put a layer or two of masking tape on the back of the cover until the space has been taken up. problem solved.
My software buttons are uneven. Vertically. Should I sand them down or beat with hammer?
Sent from my Nexus in Texas.
This shoud fix the battery cover problem http://www.ebay.com.au/itm/Metal-ba...858658?pt=PDA_Accessories&hash=item2a1808d5e2
@rbiter said:
My software buttons are uneven. Vertically.
Sent from my Nexus in Texas.
Click to expand...
Click to collapse
Mine too. I've exchanged 3 times and they all have the same problem. I think it is because of the curved glass.
Sent from my Galaxy Nexus using Tapatalk
My software buttons are uneven. Vertically.
Click to expand...
Click to collapse
I am curious. What are you talking about here? do you mean the virtual buttons on the bottom are not aligned? Could you do a screenshot to show what you mean if that is the case? I have never heard of that one before.
@rbiter said:
My software buttons are uneven. Vertically. Should I sand them down or beat with hammer?
Sent from my Nexus in Texas.
Click to expand...
Click to collapse
Lol. I had to quote myself. Guess the joke was missed.
Sent from my Nexus in Texas.
Thanks for all the replies. I ended of returning my GNex as a DOA, so now I'm waiting for a new one.
anyone else gets creaking when pressing around the back cover and the bezel around volume buttons?
AznDud333 said:
anyone else gets creaking when pressing around the back cover and the bezel around volume buttons?
Click to expand...
Click to collapse
you sure you have the case completely snapped in?
Tidbits said:
you sure you have the case completely snapped in?
Click to expand...
Click to collapse
yep, took it off and put it back on several times, you would only notice it if you were holding it to play a game like asphalt
the creaking cover is near the part where you stick your nail in to take the cover off
while the bezel creaks right above the volume button
AznDud333 said:
yep, took it off and put it back on several times, you would only notice it if you were holding it to play a game like asphalt
the creaking cover is near the part where you stick your nail in to take the cover off
while the bezel creaks right above the volume button
Click to expand...
Click to collapse
You using the stock cover or a flip cover? Mine doesn't creak at all or maybe I am just deaf.
AznDud333 said:
anyone else gets creaking when pressing around the back cover and the bezel around volume buttons?
Click to expand...
Click to collapse
Definitely do, been having the issue for a while. ..
Tidbits said:
you sure you have the case completely snapped in?
Click to expand...
Click to collapse
Tidbits said:
You using the stock cover or a flip cover? Mine doesn't creak at all or maybe I am just deaf.
Click to expand...
Click to collapse
im talking about the battery cover, not the case lol
mine has creaking near the speaker only on a certain spot its not that bad
Nope, mine does not either. Don't you hate it when you like your phones flawless then you find something minor that really isn't a big deal..... but drives you crazy? LOL
Sent from my SGH-T889 using xda premium
Mine is bad near the led for the camera
Sent from my GT-N7105 using xda premium
My mom's Gnote 2 on AT&T does this as well. Its annoying, but I think they all do this to some extent. If you take the battery door off it doesn't do it. But when you place the device to your ear for calls you can hear the creaking.
Mine used to be silent, but then with me taking it off and on a hundred times trying to figure out the wireless charging I think the tabs get a little worn and don't hold the cover in place as tightly as when new. Sucks, but I bet money a new battery cover will fix it. I just try not to pay attention. I know, that's not what we should have to do with a $650 device, but it is what it is (still the best phone on the market).
I chatted with Samsung asking if this was normal and he said no. I don't think the Galaxy S III had any creaking going on.
Can more people comment?
farfromovin said:
Mine used to be silent, but then with me taking it off and on a hundred times trying to figure out the wireless charging I think the tabs get a little worn and don't hold the cover in place as tightly as when new. Sucks, but I bet money a new battery cover will fix it. I just try not to pay attention. I know, that's not what we should have to do with a $650 device, but it is what it is (still the best phone on the market).
Click to expand...
Click to collapse
Jajaja same here. Right behind the volume buttons. Was not successful with the wireless charging. I think with time or exsecive on/off its bound to happen on a plastic cover. It's flimsy on its own but on the phone, I'm surprised how sturdy it is.
Sent from my SGH-T889 using Tapatalk 2
The Samsung Flip Cover replaces the battery door with one that is slightly thicker. It's not really noticeable, but the phone feels a lot more solid and all of my creeks went away.
MattMJB0188 said:
I chatted with Samsung asking if this was normal and he said no. I don't think the Galaxy S III had any creaking going on.
Can more people comment?
Click to expand...
Click to collapse
Never had that issue with the SIII, but it is an issue with the Note II. Samsung was no help and doesn't have the T-Mobile version in stock yet. A rep told me "this is the first we are hearing of this issue".
Fedway said:
The Samsung Flip Cover replaces the battery door with one that is slightly thicker. It's not really noticeable, but the phone feels a lot more solid and all of my creeks went away.
Click to expand...
Click to collapse
I got a flip cover, but it's hard to use the phone 1 handed... when you pull it out, you need to flip the flap without dropping the phone... and then it kinda hangs there uselessly unless you fold it behind the back which feels weird... I don't know, it looks sleek as heck, but more annoying than useful IMHO
In any case, I'm using my Nilkin case with my Note II and with that I don't hear any creaking because it's a hard shell case, actually makes the phone feel better in the hand (I swear Samsung wants us to drop the phone by making the largest, most unwieldy phone and then putting it into a glossy, plasticky and slippery frame. Sheesh, why can't they take a note from HTC and put some rubberized plastic on it? At least it'll be more scratch resistant.
My back cover and case creak, so annoying! Hope to see some replacement back covers with NFC soon to see if I can fix this...
figured out the issue, the bezel appears to be "loose"
even if it seems perfectly attached, try pushing it in towards the centre abit(so it exposes more glass), mine popped and the creaking is mostly gone.
bezel loose?
AznDud333 said:
figured out the issue, the bezel appears to be "loose"
even if it seems perfectly attached, try pushing it in towards the centre abit(so it exposes more glass), mine popped and the creaking is mostly gone.
Click to expand...
Click to collapse
Just got my Verizon Note 4 yesterday and of course had to take back off to put battery in....for the life of me I cannot get all the snaps to close on the back cover...If I get them all at the top..I have one two not snapped at the bottom and vice versa...
How in the hell you get the darn back plate to close and snap securely all the way around...? Is there a pattern or tick one needs to follow?
TIA
parcou said:
Just got my Verizon Note 4 yesterday and of course had to take back off to put battery in....for the life of me I cannot get all the snaps to close on the back cover...If I get them all at the top..I have one two not snapped at the bottom and vice versa...
How in the hell you get the darn back plate to close and snap securely all the way around...? Is there a pattern or tick one needs to follow?
TIA
Click to expand...
Click to collapse
Insert the bottom tabs 1st. Make sure they're engaged properly then work your way up.
wtherrell said:
Insert the bottom tabs 1st. Make sure they're engaged properly then work your way up.
Click to expand...
Click to collapse
trying my darndest to follow these directions but i have a stubborn clip on the bottom right corner of the back cover. it refuses to house properly, and it's to the point where i've tried forcing it and put a little dent in the cover. it seems like shoddy work, and i'm getting rather frustrated at the fact that i have a back cover that just won't sit properly on the phone.
samshin said:
trying my darndest to follow these directions but i have a stubborn clip on the bottom right corner of the back cover. it refuses to house properly, and it's to the point where i've tried forcing it and put a little dent in the cover. it seems like shoddy work, and i'm getting rather frustrated at the fact that i have a back cover that just won't sit properly on the phone.
Click to expand...
Click to collapse
Totally agree....PIA getting mine back on and its still not all the way on!
parcou said:
Totally agree....PIA getting mine back on and its still not all the way on!
Click to expand...
Click to collapse
i know this thread has been knocked back a good amount of pages and i'm not trying to bump for the sake of spamming, but this is definitely an issue for at least two of us on here. nobody else is finding that the back plate doesn't fit properly? i've narrowed it down to being an issue of the bottom two snaps on either side being too close together, most likely from the backplate becoming somewhat deformed. i went into a small local retailer and they made it sound like it was my fault, as though i had removed the backing improperly and caused the issue. i'm going to stop by a larger store later today to see if they'll take a look, but before i go in i want to get some idea of how common this issue is for other people.
so again, is anybody else having trouble closing the phone back up after opening the back cover? is it just me and parcou here who can't seem to get it to fit?
No issue here. I remove my back twice a day and it goes back on with no problem. I just lay it on the device and push it on both sides up near the heart rate monitor until it snaps in place then just go around the edges to make sure it snaps all around. I don't try to line up the top or bottom at all.
Same here
I had the same prob but with a little force an what sounded like a bone break it went on. I have not taking the back off since.
The tab at the top, in the corner, next to the headphone jack will not snap on mine. The back creaks when I squeeze it there, but the gap between the back and the phone just opens back up when I stop squeezing. Does this sound like something I should mention to Verizon? The gap is definitely big enough to allow dirt or moisture to get into the phone.
No problem with mine. placed the battery on and snapped it back together. I had to be showed how to pull the back off. Like they said use the top right corner to do that. - If I remember that right for the side ...
I had the a couple of the clips never seem to click into place. I thought I would break the glass pushing so hard.
I got a black replacement back from Ebay, much more tacky feeling that my original white back. It clicked right into place.
parcou said:
Just got my Verizon Note 4 yesterday and of course had to take back off to put battery in....for the life of me I cannot get all the snaps to close on the back cover...If I get them all at the top..I have one two not snapped at the bottom and vice versa...
How in the hell you get the darn back plate to close and snap securely all the way around...? Is there a pattern or tick one needs to follow?
TIA
Click to expand...
Click to collapse
Sorry, no issue here either.
This totally sounds like a back plate problem tho.
Were you able to get your hands on a new back cover or maybe test out a back cover of a display model at a Verizon store?
parcou said:
Just got my Verizon Note 4 yesterday and of course had to take back off to put battery in....for the life of me I cannot get all the snaps to close on the back cover...If I get them all at the top..I have one two not snapped at the bottom and vice versa...
How in the hell you get the darn back plate to close and snap securely all the way around...? Is there a pattern or tick one needs to follow?
TIA
Click to expand...
Click to collapse
Sorry about that issue. This is weird since I have no problems. I purchased a battery charger and a second battery and I change batteries everyday and have no issues... thank God.
Sent from my SM-N910V using Tapatalk
I've been having that same problem, with both the original backing and the book like car that Samsung makes. The $50 case from Samsung is going back until they're cheaper and I'm just getting something for the back from eBay to cover the open spaces.
Hello,
It's September 2017 - I just got my new old stock Verizon Note 4 and I'm seeing the same back cover problem. Out of the box it was not seated at the bottom edge. I could seat it at the bottom, or top - but not both.
The solution for me was to start by seating the bottom edge and the first clip up both sides. Then I left the rest of the side clips unseated and used my thumbs pressed in the center of the cover to slide it towards the top. I alternated this with working on the top clips and and got one and then the rest seated. I snapped the rest of the side clips in place last.
I hope this helps!
Pete