Develop Bugs

Poor build quality, I can hear cracking sound on the left side of the phone

Hi
My gnex makes cracking sound when grabbed.
The sound is only coming from the left side about 1.5cm below volume rocker. There is no movement of any parts of the phone just that frigging sound.
Now should I send it for replacement/repair or just live with it? Its £500 phone and something like this happening after a week of usage?
Edit:
videos here
http://www.youtube.com/watch?v=QxGhlnRCneY
http://www.youtube.com/watch?v=LTdU5voC7kY
Sent from my Galaxy Nexus using xda premium

Replace. One week is unacceptable. This phone seems to be having a lot of quality control issues.
Sent from my SPH-D700 using xda premium

Did you try removing and replacing the battery cover? It might not be in properly?

I got mine yesterday and have noticed that the back cover has a bump in it, as if its not sat down correctly,in the same place as the OPs phone, iv taken the back off and back on again so many times to try to get it right!!!... doesn't want to know...not sure if its the cover or the phone....its going back tomorrow...not good for a £500 phone....hopefully I'll get a good one...
Sent from my Galaxy Nexus using xda premium

MattSkeet said:
Hi
My gnex makes cracking sound when grabbed.
The sound is only coming from the left side about 1.5cm below volume rocker. There is no movement of any parts of the phone just that frigging sound.
Now should I send it for replacement/repair or just live with it? Its £500 phone and something like this happening after a week of usage?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I have the same issue. I thought it's just the way it is on this phone, the back cover is really cheap.. I can even see a very small bump on one side.

The problem is that this is happening even without the cover on the phone. I take the cover off from the phone and press on the side of it I can still here cracks. There is so many things I love about this phone, dictation or the screen or the actual size and thinness of the phone. Unfortunately samsung is making their devices from really thin and cheap plastic. Have the same problem on my samsung galaxy tab 10.1 on the back cover. it feels like the back cover is going to come of the device. The only reason I didn't return my galaxy tablet is because I got the free cover with it which means I don't really feel the back.
Unfortunately due to lack of the covers for samsung galaxy nexus I cannot resolve this issue that way which will be satisfactory for me. ps I just said the above text, I love this phone
Sent from my Galaxy Nexus using xda premium

macfre said:
I have the same issue. I thought it's just the way it is on this phone, the back cover is really cheap.. I can even see a very small bump on one side.
Click to expand...
Click to collapse
Hmm i definitely don't have that on my GN. Where abouts is the bump?

kam187 said:
Hmm i definitely don't have that on my GN. Where abouts is the bump?
Click to expand...
Click to collapse
Bottom left. Left to the "SAMSUNG" logo, where back cover joins with the rest of the body.
EDIT: I've just attached picture of that bump.

macfre said:
I have the same issue. I thought it's just the way it is on this phone, the back cover is really cheap.. I can even see a very small bump on one side.
Click to expand...
Click to collapse
macfre said:
Bottom left. Left to the "SAMSUNG" logo, where back cover joins with the rest of the body.
Click to expand...
Click to collapse
Hmm Nothing here. I ran my finger all the way round where the battery cover joins the body and its flush all the way round.
I just removed the battery cover and put it back on, and still couldn't reproduce it. I did notice tho putting the cover back on is not really straight forward. if you're looking at the back of the phone:
- There's two tabs at the bottom of the cover which need to slide in - cover pushed downwards into the body.
- Theres a tab on the right which has to be slid in towards the right.
- There's a tab on the left which has to be slid in downwards.
Trying to do all three at the same time is a bit weird. I find putting the bottom right tab in and he right tab in together, then slightly bend the battery cover to slide the bottom left and left one in. Then push the rest down. If you don't slide the tabs into where they slot in, you can't push them down properly afterwards.

i thought 5 year olds knew how to put battery covers on
it comes off top to bottom, so when you go back to put it on, snap it in bottom to top

kam187 said:
Hmm Nothing here. I ran my finger all the way round where the battery cover joins the body and its flush all the way round.
I just removed the battery cover and put it back on, and still couldn't reproduce it. I did notice tho putting the cover back on is not really straight forward. if you're looking at the back of the phone:
- There's two tabs at the bottom of the cover which need to slide in - cover pushed downwards into the body.
- Theres a tab on the right which has to be slid in towards the right.
- There's a tab on the left which has to be slid in downwards.
Trying to do all three at the same time is a bit weird. I find putting the bottom right tab in and he right tab in together, then slightly bend the battery cover to slide the bottom left and left one in. Then push the rest down. If you don't slide the tabs into where they slot in, you can't push them down properly afterwards.
Click to expand...
Click to collapse
Yeah, that bump comes from not putting the back on properly - I've done that once

suffeks said:
i thought 5 year olds knew how to put battery covers on
it comes off top to bottom, so when you go back to put it on, snap it in bottom to top
Click to expand...
Click to collapse
lol not trying to be patronising! But its not actually as simple as bottom to top, or you'll probably break the tabs!

what I meant is not the actual battery cover, is the frame around a phone that is making a cracking sound and its located roughly about 1.5 centimeters below volume rocker. Basically its normally were you would hold the phone
said by my Galaxy Nexus using xda premium

macfre said:
Bottom left. Left to the "SAMSUNG" logo, where back cover joins with the rest of the body.
EDIT: I've just attached picture of that bump.
Click to expand...
Click to collapse
MattSkeet said:
what I meant is not the actual battery cover, is the frame around a phone that is making a cracking sound and its located roughly about 1.5 centimeters below volume rocker. Basically its normally were you would hold the phone
said by my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
The bump is definitely due to not putting the cover on properly - I just tried it now. (the left clip needs to be pushed into the phone and then slide downwards to latch on).
But the cracking sounds definitely seem like an issue with your nexus. I just squeezed all the way round the housing, with cover on and off and I dont have any cracking sound at all.
I would send it back for a replacement, who knows it might get worse, or have a broken housing inside.

lol people not putting the back cover on properly.
lol.
hahaha
lol.

Your holding it wrong. LoL
Seriously though that creak would drive me crazy. Its not that heavy so there is no reason to stress the body.
My Transformer will creak if I hold it with one hand while picking it up because of the weight. Perhaps it wasn't sealed properly?
G2x - 2.3.7 CM7
Transformer - 3.2 Revolver OC/UV

post updated with videos

Naths said:
I got mine yesterday and have noticed that the back cover has a bump in it, as if its not sat down correctly,in the same place as the OPs phone, iv taken the back off and back on again so many times to try to get it right!!!... doesn't want to know...not sure if its the cover or the phone....its going back tomorrow...not good for a £500 phone....hopefully I'll get a good one...
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Not sure if you have a specific problem but I have noticed the best way to put the back on in general is to start at the bottom and make sure you click every one on your way to the top.

Back cover won't snap in at the bottom left corner

It's only been 1 week and the poor quality, flimsy back cover is showing wear and tear. It won't get into its allocated slot, and by the looks of it, seems that it became a fraction shorter.

It always seems click in better for me if I start at the bottom and work up.

TareX said:
It's only been 1 week and the poor quality, flimsy back cover is showing wear and tear. It won't get into its allocated slot, and by the looks of it, seems that it became a fraction shorter.
Click to expand...
Click to collapse
You're not putting it in correctly. Gotta make sure the bottom tabs are before you start snapping the rest. I have more success getting the right tab in first and messing around till the other tab falls in and the bottom of the cover kisses the phone.
My grandma beat me down and took my nexus. Sent from a jitterbug with beats by dre.

SOLVED: Thanks to this guy from androidcentral:
"Originally Posted by DBVille: And, make SURE the hooks aren't bent up. I am betting the hooks have been bent up, at least on one side, from trying to push it closed. (dont ask how I know). Look very closely at the hooks. Put your finger nail under them and pry them up/apart from the back if they are too close to the cover to engage the clips on the phone. When done right, it just snaps on. But, you must get the bottom done first."
The hooks were bent up... fixed them with my nails. Now it snaps back on. Still pretty cheap though.

Or user error?
My grandma beat me down and took my nexus. Sent from a jitterbug with beats by dre.

you're not supposed to snap in the bottom hooks, you lock them in first, then snap in the ones rest...

wonshikee said:
you're not supposed to snap in the bottom hooks, you lock them in first, then snap in the ones rest...
Click to expand...
Click to collapse
+1 this is how I do it...common sense...
Sent from my Galaxy Nexus using XDA App

Happen to me too the first week. I'm a pro now.
Sent from my Galaxy Nexus using xda premium

God, the build quality and camera are a real disappointment on this phone. thanks for the tip on bending up the tabs.. worked for me..

never the OP's fault that he doesnt know how to put the back cover on.. always Samsung's fault for not making it tard proof.

Zepius said:
never the OP's fault he doesnt know how to put the back cover on.. always Samsung's fault for not making tard proof.
Click to expand...
Click to collapse
Admittedly the back cover of the GN is one of the more complicated ones to put back onto the phone.
Do not force it on - if you do it right, it will go back on with just a little pressure. Like others said before you have to start at the bottom latches and work your way up from there. Note that the bottom latches are different from the others and do not snap in like the rest.

I'm extremely pleased with the build quality of this phone! A product feels VERY well build when you can't make it flex slightly or make the battery cover creak by squeasing the phone a certain way! Looking at you, HTC! The DInc, Thunderbolt, and Rezound that I've had all suffered from that. (Though I couldn't make the Thunderbolt flex)
And anytime you drop an HTC phone, first the battery door flies in the air, then the battery pops out -.-
Samsung on the other hand, the Nexus is VERY solid, battery door doesn't creak nor does the frame. No creaking sounds at all. I cannot flex the phone. What is it with people dissing Samsung for making plastic phones, what do you want them to do? Engineer a new compound? Geez

As so many have pointed out, the cover doesn't snap at the bottom; you start there by inserting the bottom hooks, then snap the sides and top.
In fact, I've found the easiest, most effective way to do it is laying out face down, insert the bottom hooks, then zip up both sides together with my thumbs, finishing with effortlessly snapping the top in.
As for the build, I couldn't disagree more strongly. The back design is brilliant. The phone overall is rock solid, and has solved the common back pop-off battery pop-out of most phones today.
Sent from my Galaxy Nexus using xda premium

I was at a Verizon store last night. Picked up the phone from the display they had it in. The back cover fell off along with the security device. Does the cover have issues staying on? Would a case solve this issue?

Tisosview said:
I was at a Verizon store last night. Picked up the phone from the display they had it in. The back cover fell off along with the security device. Does the cover have issues staying on? Would a case solve this issue?
Click to expand...
Click to collapse
There is no issue if you put it on correctly.
Sent from my Galaxy Nexus using Tapatalk

Careful because our store model had a broken back cover since day one. Two sided take is holding it together at the moment.

Tisosview said:
I was at a Verizon store last night. Picked up the phone from the display they had it in. The back cover fell off along with the security device. Does the cover have issues staying on? Would a case solve this issue?
Click to expand...
Click to collapse
Happens at all the stores. Some have ziptied the backcover back on . However, it really is a non issue. In the case of the store phones, the heavy security device that is glued onto the back cover, pulls very hard at the back cover and it creates issues. In reality, given that it is a completely flat piece of plastic that is sitting flush against your phone with no handles, there is no way to exert even remotely the same amount of outward forces on the back cover.
While removing and putting on the backcover doesn't feel great, the cover does a great job, helps keep the phone slim and light, and looks pretty damn good. The store model did put me off due to this same issue with the security device, but I have had absolutely no issues with the backcover, or the phone feeling flimsy (and I came to the GN from the OG!).

LOL the back cover is well built imo. Just because it is thin does not mean it is of poor construction.The people who are having problems just aren't bothering to learn how to put it on. You don't just snap the whole thing on. Put any backcover on incorrectly and you risk damaging it.
I remove my back cover regularly to swap SIMs and although I've had it since release day not only does it look the same as it did when I bought it but it functions perfectly too (stays on nice and tight).
TLDR; If your tabs are bent you're doing it wrong. Don't blame design for your lack of intelligence.

Thank you for the replies. It is reassuring.
I found it funny that the security really didn't work for this device. Since the alarm didn't go off when the back fell off.

Bottom tabs get bent up
I've had my GN for a little over a week. The problem that I have, and I assume the others have, is that the tabs at the bottom get bent up so that they can't hook in.
I bent them down with my fingernail so that they are horizontal again, and it clicked in fine.
My concern is that this is already a problem after a week, and plastic can only take so much bending and fatigue before it totally breaks, which will eventually occur. I would imagine that at least some people who have had their GNs since launch have already experienced this.
Frankly, I think this is a manufacturing issue that Samsung should ultimately address.

Build quality

Over all I'm happy with the build quality of my GSM GNex, but it has one minor flaw.
The plastic edge around the screen. Top, Bottom and Right side are perfect and rounded smooth (just like my SGS2), but the left edge i kinda rough and not rounded and smooth like the others. It has a rough feel with a slight sharp feel if you slide your finger over it and makes a "small" rough sound.
Do any of you recognize this? Or is your GNex perfectly smooth like the SGS2?

mine feels uniformly smooth on all sides. one thing i don't like though is dust being trapped in between the said edges and screen. other than that it's flawless

I'm very happy with the build quality on my verizon version.

My only gripe about my GN physically is the rear cover. Just below the camera if you put a small amount of pressure on the cover and then release it, you can hear a slight clicking noise as the cover pops back out.
Other than that, flawless.

My problem .... frigging power button on side of the phone!!! I have to be so careful not to do a screen shoot its just unbelievable ...only other way of switching screen on or off is to hold the phone form top instead resting it on your palm
Sent from my Galaxy Nexus using xda premium

My Gnex is perfectly solid despite having dropped it on tile twice. Yeah, I'm a klutz. There aren't any creaks in it, no popped-up glass, buttons are smooth, no loose or rough joins anywhere.
As I mentioned in another thread, the "flimsy" back cover of the Gnex has an advantage in that it doesn't fly off and let the battery go as well when the phone is dropped. Every smartphone I've ever owned would, when dropped, fly in three different directions when it hit the ground- phone in one direction, back cover in another, battery in another. The Gnex stays in one piece.
Somehow I've only managed to break two phones in my life despite my constant accidental drop testing. Neither of the broken phones was a Samsung (one was a SE X10 dropped into a sinkful of water, the other a BlackBerry dropped on pavement). Admittedly the Samsungs feel a little flimsy next to a lot of high-end phones, but the fact that they are lightweight and plastic actually makes them more durable, IME.

Mine is fine, outside of one extremely annoying issue. The vibrate motor on my unlocked GSM Nexus makes the phone rattle on the bottom right side (obviously where the motor is housed) if I'm not holding the phone on that side. I am normally a vibrate all the time guy...now I only have it vibrate for phone calls because it annoys me so much. I love how powerful and silent the motor is when I'm holding it...(at least compared to my Droid Incredible 2). My Verizon Nexus didn't do this at all before I returned it. Sad.

Lodion said:
My only gripe about my GN physically is the rear cover. Just below the camera if you put a small amount of pressure on the cover and then release it, you can hear a slight clicking noise as the cover pops back out.
Other than that, flawless.
Click to expand...
Click to collapse
Argh, hadn't noticed that before. cannot unhear the clicking noise

put a layer or two of masking tape on the back of the cover until the space has been taken up. problem solved.

My software buttons are uneven. Vertically. Should I sand them down or beat with hammer?
Sent from my Nexus in Texas.

This shoud fix the battery cover problem http://www.ebay.com.au/itm/Metal-ba...858658?pt=PDA_Accessories&hash=item2a1808d5e2

@rbiter said:
My software buttons are uneven. Vertically.
Sent from my Nexus in Texas.
Click to expand...
Click to collapse
Mine too. I've exchanged 3 times and they all have the same problem. I think it is because of the curved glass.
Sent from my Galaxy Nexus using Tapatalk

My software buttons are uneven. Vertically.
Click to expand...
Click to collapse
I am curious. What are you talking about here? do you mean the virtual buttons on the bottom are not aligned? Could you do a screenshot to show what you mean if that is the case? I have never heard of that one before.

@rbiter said:
My software buttons are uneven. Vertically. Should I sand them down or beat with hammer?
Sent from my Nexus in Texas.
Click to expand...
Click to collapse
Lol. I had to quote myself. Guess the joke was missed.
Sent from my Nexus in Texas.

Thanks for all the replies. I ended of returning my GNex as a DOA, so now I'm waiting for a new one.

Galaxy Note 2 build quality...???

I have bought a new Galaxy Note 2 a couple of days ago but there are some problems with build quality, I don't know if they are widespread or not!
The battery cover squeaks when I press over it, mainly near loudspeaker and volume buttons.
The volume and power buttons feel a bit loose, i.e. they move half a millimeter vertically.
Do you have the same problems? Is my device defective? Do I have any chance with warranty to fix these?

Eienkei said:
I have bought a new Galaxy Note 2 a couple of days ago but there are some problems with build quality, I don't know if they are widespread or not!
The battery cover squeaks when I press over it, mainly near loudspeaker and volume buttons.
The volume and power buttons feel a bit loose, i.e. they move half a millimeter vertically.
Do you have the same problems? Is my device defective? Do I have any chance with warranty to fix these?
Click to expand...
Click to collapse
buttons do feel a bit loose, but no biggie for me especially those on volume. battery cover squeaks a bit when pressed too hard, but it's plastic, and plastic with right amount of pressure squeaks.

I have minimal movement in the buttons. A fraction of a millimeter, if any. I have absolutely no squeek with normal use but can fine an area that squeeks if i try hard. Make sure your cover is properly fitted.

Mine doesn't squeak in normal use either but if I push it, it will!

Stupid thread
Sent from my GT-N7100 using xda premium

ChimpNippl3s said:
Stupid thread
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Ha ha ha
No this isnt stupid thread.
I have some problems. F... Phone for 600Eur

I hate plastic, so I hate Samsung for that. But sorry the buttons don't feel loose, and what do you mean by back plate squeaks near speaker grill, when do you try to open it or just normally press it when it's firmly sitting there? If it's the latter then mine doesn't squeak too.
But other than these, I don't like build quality, how can I when it's all plastic!

My phone makes an awful noise when I drop it. Solution - don't drop it.
My phone makes a noise when I press the back cover. Solution - don't press the back cover.
Is pressing the back cover of the phone something that you need to do in normal use?
Anyhow I saw a comment a while ago that taking the cover off or putting it on in a certain way can damage the tabs along the edge and cause it to squeak. Check the tabs and see if they are all there or are damaged
Sent from my Samsung Note II.

It's a flagship for crying out loud! You really think the solution is not touching or thinking about it? Don't get me wrong, I love every bit of my phone but Samsung really has to do better with build quality of it's flagships. What was wrong with S2 design? It didn't squeak and was more scratch resistant...

Eienkei said:
It's a flagship for crying out loud! You really think the solution is not touching or thinking about it? Don't get me wrong, I love every bit of my phone but Samsung really has to do better with build quality of it's flagships. What was wrong with S2 design? It didn't squeak and was more scratch resistant...
Click to expand...
Click to collapse
I agree! Infact on S2 the bottom bulk ensure that I hold the phone the right way. Holding Note 2 is a dicey affair as its symmetrical design makes it difficult to know the orientation. I HATE glossy plastic button against the Matte finish, practically indestructible thin plastic on S2. Although I don't like the exposed bottom bulk which is not covered by the battery cover! I personally prefer the plastic cover on Galaxy R which completely cover the back including the area around the MicroUSB port which can easily get scratched otherwise.

Eienkei said:
It's a flagship for crying out loud! You really think the solution is not touching or thinking about it? Don't get me wrong, I love every bit of my phone but Samsung really has to do better with build quality of it's flagships. What was wrong with S2 design? It didn't squeak and was more scratch resistant...
Click to expand...
Click to collapse
While plastic, it is much stronger than some of the more popular alternatives out there.
Which do you prefer?
http://www.youtube.com/watch?v=rofgMueCOqo

I have a Galaxy Ace which squeaks a bit. So I use a case which makes it not squeak at all.
You could try that.

Back squeaking would be gone if you put a business card between battery and back cover, so don't think that it was made due pulling it off in a bad way or anything else!

Eienkei said:
I have bought a new Galaxy Note 2 a couple of days ago but there are some problems with build quality, I don't know if they are widespread or not!
The battery cover squeaks when I press over it, mainly near loudspeaker and volume buttons.
The volume and power buttons feel a bit loose, i.e. they move half a millimeter vertically.
Do you have the same problems? Is my device defective? Do I have any chance with warranty to fix these?
Click to expand...
Click to collapse
My battery cover squeaks on the opposite side -- near the power button. Although this is probably because I'm using the official flip cover and the portion of the battery cover near the volume buttons is quite stable and thick. Honestly it was initially annoying as hell because I noticed it a week after getting the phone, but it doesn't bother me as much now. At least it doesn't really exhibit the squeaking when I'm actually using the phone -- only when I'm making myself notice it. LOL.
The buttons (volume and power) are a bit flimsy. Way too easy to press, especially the power button. But I'm using the official flip cover + IntelliCover app. So I don't have to actually USE the power button anymore. Not a real solution, but it's a good workaround for those using flip covers.

One more thing to add to obsession list, bezels tend to squeak on certain points!

bezel is coming off
any one expensed the bezel around the screen coming loose?
bought 4 days and already seeing this

It's like that from beginning... Nothing to worry about! Maybe a mechanism to avoid breaking...

Mine has nothing wrong... no squeaks, no loss buttons
Sent from my GT-N7100 using xda premium

Creaking phone?

So a few days ago I began to notice that the back of my phone is now creaking, I first heard it when i went to pick my phone up the other morning and it sounded like an old hardwood floor creaking sound, it's progressively gotten worse to where now when i hold my phone during a call if i shift my hand at all the person on the other line can hear it. I was wondering if anyone else had this problem. The creaking seems to be isolated to (if you're staring at the back of the phone) the left half of the phone just below the power button and stops creaking above the phone model number beneath the glass.

parham.derick said:
So a few days ago I began to notice that the back of my phone is now creaking, I first heard it when i went to pick my phone up the other morning and it sounded like an old hardwood floor creaking sound, it's progressively gotten worse to where now when i hold my phone during a call if i shift my hand at all the person on the other line can hear it. I was wondering if anyone else had this problem. The creaking seems to be isolated to (if you're staring at the back of the phone) the left half of the phone just below the power button and stops creaking above the phone model number beneath the glass.
Click to expand...
Click to collapse
Mine is as solid as day 1

Same problem here.
Sent from my LG-LS970 using xda app-developers app

I've noticed this too but after putting my diztronic case over it, the creaking stopped.

My phone rattles when a tap my fingers next to the lens or put the phone down. No creakng yet.
Sent from my Nexus 7 using xda app-developers app

Ive noticed mine on the camera. Whenever i try to tap the back of the phone, it seems like its not perfectly fit or something.
Sent from my LG-LS970

They have a similar thread on the international optimus g page with the same complaint. I wonder if the Nexus owners do to.
Edit: the Nexus has the same issue. Just Google nexus 4 and rattle. Seems pretty wide spread.
Sent from my LG-LS970 using xda premium

kc_exactly said:
They have a similar thread on the international optimus g page with the same complaint. I wonder if the Nexus owners do to.
Edit: the Nexus has the same issue. Just Google nexus 4 and rattle. Seems pretty wide spread.
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
So this makes me curious as to what other defects its going to have, but I'm on to a different issue, phone dropped about 2" and the digitizer broke, so when my new screen comes in i will do a walk through tutorial on how to replace it... starting to wish i had gone with the GS3...

Mine is also doing that. Just started to notice it today. Kinda makes my opinion of the build quality a little less. But still love the phone. Minus the messaging bug. LOL.
Sent from my LG-LS970 using xda premium

If I use my shoulder to hold the phone to my ear I get a creaking sound too. That's the only time I've heard it though. I imagine it has to do with the glass back.

Here, too. It's the camera side, right below it, that creaks. Fortunately, it's only noticeable when I deliberately squeeze it.
Sent from my LG-LS970 using xda app-developers app

solid here....this msg bug you guys are talking about, is it when your typing the sceen jumps and your back at the start of the msg?

Hey, so I just noticed that if I flip the phone over and orient it so the camera is on top, then it will creak when I push on the left side. You can also see the casing move in slightly. It's almost as if it's broken somewhere but you can't see any crack.
I thought the people at Best Buy had said the back was glass but it's looking more like cheap plastic at this point. Is it different on AT&T maybe?

parham.derick said:
So this makes me curious as to what other defects its going to have, but I'm on to a different issue, phone dropped about 2" and the digitizer broke, so when my new screen comes in i will do a walk through tutorial on how to replace it... starting to wish i had gone with the GS3...
Click to expand...
Click to collapse
I dropped mine from chest height and nothing happened to it. That really sucks for you. How much was the replacement screen?

cthedogg said:
I dropped mine from chest height and nothing happened to it. That really sucks for you. How much was the replacement screen?
Click to expand...
Click to collapse
The replacement screen was $130 went with 2 day shipping (Digitizer/LCD Assembly). Just the digitizer was only $60 but it's a good thing I went with the whole assembly because when i was trying to pull the glass out of the housing some of the shards came off by themselves, and revealed that LG "fusing" the glass to the lcd is literally glue covering the entire LCD making it damn near impossible to just replace the digitizer and make it look nice.
Also a few warnings to those disassembling their phones:
1) The battery isnt solid, more like cased in an extreemly soft metal so it will dent if not carefully removed (it's glued into the housing)
2) The chrome edge dent's very easily, have a small ding where i got impatient, TAKE YOUR TIME!
3) When removing the back cover don't cross over the volume rocker, power button, or USB port with the spudger. for the top of the back removal gently push the back cover forward dont try to shove your spudger in their, it wont work lol.
I'm going to be doing a full disassembly guide that's a lot easier to follow than the "engrish" version korea put out for us english speaking techs when my new roll of 3m tape comes in. =P

This cracking is caused by a small piece of sticky under the back cover you can either remove the sticky or ad some more this would prevent the cracking...
I posted a service guide here on XDA search my name for it... It will show how you can remove the back cover... just when taking it off remember the back can crack easy and the plastic can ding or dent rather easy and make sure you don't mess up the power button or the volume buttons
ruthlessbeatle said:
solid here....this msg bug you guys are talking about, is it when your typing the sceen jumps and your back at the start of the msg?
Click to expand...
Click to collapse