Develop Bugs

[Q] Anyone tried this case??

http://www.amazon.com/Impact-Resist..._1_5?s=wireless&ie=UTF8&qid=1319246803&sr=1-5
Im looking for a cheap decent case till trident releases the agies version, and this one looks to be the cheapest but yet decent, because it will has a drop resistant in it. i dont wanna spend 35 bucks on the case-mate tough due to gonna get the trident case when it comes out.

i liked it but i did not get one so i dont know how it is

majmuni said:
i liked it but i did not get one so i dont know how it is
Click to expand...
Click to collapse
i like the kickstand idea of it, from the reviews it sounds ok, just the top and bottom are not well protected, just the corners.

They sell this case at the sprint store. so i would go there first and check it out but this is a way better deal then they have.

My local Sprint store also carries this case. I didnt buy it cause it really looked bulky.

atoy74 said:
My local Sprint store also carries this case. I didnt buy it cause it really looked bulky.
Click to expand...
Click to collapse
I dont mind bulk really. i figure with big hands, that might help me a little because this phone i thin.

Scratches phone
Read my post here about this case...
http://forum.xda-developers.com/showthread.php?t=1292459
Not everyone has troubles with it but I wouldn't trust the case if I dropped it. I ended up buying one of these from eBay and it provides way more protection with little bulk...
http://www.ebay.com/itm/180729129853?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_1480wt_1341
No kickstand but it's worth it till I find something better. Only took 6 days to receive it.

The problem I've got with most cases, is that it looks like "a phone snapped into a case". And having a flippy kickstand out the back adds some functionality, but if you don't need or wouldn't use that functionality, it contributes all the more to that "that doesn't look like it belongs there" look. Looks a bit like you've taken half your windshield mount with you.
It's like those cars you see college kids driving around, with the stuff bolted onto them that doesn't integrate well with the car, and you wonder if they've ever actually been to a car show and understand that the best modifications are done in a way that makes the car look more integrated, not less. Phone cases have always been sinners this way.
I bought a matte black TPU case more or less as a placeholder... I've been a person who personally hates cases due to the above, and these phones are so thin that I'd hate to ruin that as well...
Needless to say, I clicked "purchase" with a sigh, thinking it was just temporary, something cheap for protection until the market opened up and I might find that 1% case that was classier and didn't look like a "case snapped on a phone".
I have been more than pleased with the TPU case, I feel like I've accidentally stumbled onto that case. It's the right combination between soft and hard, to actually absorb and disperse shock, it wraps around the front to protect there too, 360 degrees.
It looks like "the phone", it doesn't look like a case even, and the matte black back and gloss front ring look classy, elegant. No rubbery gel look, no playskool plastics, no kids-toy colors or fades, no skulls or dragons, etc. The phone is thin enough to pull it off without looking like a brick too.
I'd recommend this case to others - especially for the $8 shipped cost.
I'd think it'd much better absorb shock than a hard plastic one... it'll absorb it rather than transfer the shock wave right to your phone like a hard plastic one would.

I have not found any worthy case for SG2...There is not a big variety.

i almost love the case
for twenty dollars its not bulky. Thinner than the tpu cases thats for sure ialso tried a gel but doint think i need the xtra protection. im not clumsy and take care of my phones. the top and bottom are not protected but kinda they are they have a lip over the corner and unless it falls on something that sticks out im good. falls on floor the corners are good. plus any case that is over protecte are over bulky an for the scratching have not seen any thing of the like

I'm with Vega. This case is very good, looks great, isn't bulky, and isn't scratching my phone.
I posted some pics in the thread for this case ( http://forum.xda-developers.com/showthread.php?t=1292459&page=2 ) so you can maybe see it from some angles not in the sales shots, but everyone I show this phone to immediately comments on how small and light the phone is, and then I take the case off and they are amazed it gets even smaller.
I'm not a fan of cases, and I'm not a fan of any extra bulk, and I really like this case. Looks great, and gives some light protection.
Light protection? Yes. I did a drop test on linoleum (much harder than carpet, but not as hard/damaging as concrete) and in three drop from knee, waist, and chest high, it did fine. At head high, the case popped off. Which I expected. If you are throwing your phone around like a spaz, get a good gel case or something better than that. If you might accidentally drop your phone getting out of a car, but are not a spaz beyond that, this case is great.
Pics again:

I used this case for about 2 weeks and it scratched my phone on the side bezel on both sides of the phone and also on the back of the phone down by the speaker. I wouldn't use it again. Got the TC case from Amazon in matte black. is much better and cheaper.

@DevonSloan thank you for a little bit more review on that for me :-D i also like the pictures you added much better than what amazon showed

Vega said:
for twenty dollars its not bulky. Thinner than the tpu cases thats for sure ialso tried a gel but doint think i need the xtra protection. im not clumsy and take care of my phones. the top and bottom are not protected but kinda they are they have a lip over the corner and unless it falls on something that sticks out im good. falls on floor the corners are good. plus any case that is over protecte are over bulky an for the scratching have not seen any thing of the like
Click to expand...
Click to collapse
Not so. This kickstand case is much thicker and bulkier than the TPU case. I know this for a fact because I have both. The TPU TC case is cheaper, thinner, feels better in your hand, protects your phone better, won't scratch your phone, is less slippery, and your phone won't fly out of it if you drop it. That happened to me with this case, too. The kickstand is lame as well. If you set it on a table with the kickstand out, the phone leans back at about a 45 degree angle making it really hard to see the screen.

DataHawg said:
Not so. This kickstand case is much thicker and bulkier than the TPU case. I know this for a fact because I have both. The TPU TC case is cheaper, thinner, feels better in your hand, protects your phone better, won't scratch your phone, is less slippery, and your phone won't fly out of it if you drop it. That happened to me with this case, too. The kickstand is lame as well. If you set it on a table with the kickstand out, the phone leans back at about a 45 degree angle making it really hard to see the screen.
Click to expand...
Click to collapse
well somethings wrong if ur having issues seeing the screen. the type of screen it is, has the feature to be able to have the phone at an angle and still see the screen clear.i myself would prefer a bulky feel any. like the htc evo shift is semi bulky just a really small screen.

If you like a bulky case this is the one to get. Most of us don't, especially on a phone this big. Just sayin

Cases

There is nearly only 3 types of cases out at the market.
First the hard plastic cases that are coming in 2 parts. There are the glossy ones and the trubberized ones in a wide variety of colors and styles at ebay or Amazon. The quality is OK but not perfect. What I like is the good protection in combination with the acceptable increase of size. The problem is that you nearly can't remove the front part of the case without breaking the very small bars fixing the case to the device. I like the rubberized ones most. They are looking more stable to me than the glossy ones. With the case it's more difficult to slide out the QWERTY keyboard. But it's acceptable. What I like very much is the protection of the on/off button and then loudness buttons. Because without the case I öfter press these keys withooany will.
Then there are the leather cases. There are horizontal and vertical ones. I tried to use the ones for the Samsung Galaxy S2 also, they fit. But of course not together with the hard plastic case together. For that I will try cases made for the HTC Sensation XL. I will share my experiences as soon as I get the cases.
The third category are cases that are blocking the hardware keyboard. That unacceptable for me. I tried rubber cases for the Samsung Galaxy S2 and it worked for one but the fitting is not not really good. The thickness of the device is quite different from most other smartphones.
Hope I could help a little bit and will share my upcoming experiences.

Thanks for checking out the cases, did they the leather/rubber ones block the camera at the back or did it have the correct position for the opening?

The leather ones I tried are for pulling out the device before use.
The rubber one I tried had a big camera hole on the back. But I forgot to check the other connector holes but if I remember correctly some cutting work has to be done. But this is possible with the right tools. Sharp knives and hole cutters for leather/paper.
Best thing is to try the case at a shop. Surely some fits better than others. But I think the Galaxy S2 category is the best you can get. The Galaxy Note ones could be also work, because it's taller but thinner.
The first category cases are made for the device and aren't blocking anything.

I wonder if anyone has tried the one-piece Speck cases yet (can't post links yet, but a Google search for "speck captivate glide" should bring up the page on Speck's site). They look good, but I'm curious if they restrict the sliding mechanism or block the keyboard at all.

fatxdad said:
(edited for brevity)
Click to expand...
Click to collapse
Just wanted to share my review, got a hard rubberized case on Amazon from ezbuy123. It's a 2-piece, snap-on. In the past, I've used Otterbox on EVERYTHING, but since they dont have an i927 case out yet, I figured I'd take a chance. The build quality is probably a 3.5/5 - it's hard, it's plastic, it's rubberized, that all is true. The edges of the case around the keyboard area are already starting to get chewed up, and the rubberizing doesnt have any real texture to speak of, I feel like I'm going to drop it when I use it. On the plus side, it isnt a weird neon color, and it doesnt add much bulk or weight to the phone.... All in all, I'd be pressed to give it 4/5 overall, it will definitely be replaced with an Otterbox if they ever decide to make a case for the i927.

Speck Sureslider Case
So I just received the Sureslider case today. I bought it for 24 dollars (from versiomobile before they charged 35 ).
Here's my review on it:
It's a one piece piece that has a hard plastic back with polycarbonate. On the front, it's made up of TPE (thermoplastic elastomer). The TPE gives the case a lip from the screen of the phone. It still slides when you put it on its face but not by much. Only the top part actually clips onto the phone. The back plate just kinda sticks to the phone.. somewhat. There's basically no restriction when you're sliding it, it feels like it's not even there. Regarding the top keys of the qwerty keyboard, it might've moved a nanometer, but not to significant to affect your typing.
Honestly, I don't think the price of $35 is worth it. I'd say it'd be more fair around 13 dollars. It also comes with a one-year warranty, so maybe that's where the high price came from?
The Sureslider case is technically a "one-piece" but when I got it, somehow the connection between the bottom and top part became loose and the top part came out. Needless to say, i thought it was going to be an easy fix. It wasn't . You can't just "slide" it into one piece since there's a hook and a little clip at the bottom to provide stability. After I managed to get the piece together, I went through the packaging, and there was this small instruction slip. It said "If the case becomes separated by mistake, align the two pieces and fit back together."
If you have any questions, feel free to ask.

I got the rubberized texture case from ebay (shop4phree*). 5 bucks included shipping. Just to get something on the phone quick before I scractched it. I have to say for being so cheap it has help up surprisingly well. I was going to go for a higher end case at a later time but it's now going on 2 months and I haven't felt the need to switch. The only drawbacks I can see is it interferes with the smoothness of the slide out keyboard (requires a little more finger power to push it up) and the extra bulk it adds makes your top row of keys a little tight when typing(especially with big fingers).Ive dropped my phone a couple of times and it has held intact.
Im a cheap bastard so my $5 case works great for me.

Amzer cases
Well i managed to snap the feelers on my first case (the black rubberized one), so I've moved on to an Amzer case from Amazon. It's a 2-piece, snap-together advertised as "one piece". The build quality is probably a 3/5 - it's hard, it's plastic, it's rubberized on the back half, but the front half is clear hard-poly that looks awful (definitely not at all like what the pic on Amazon makes it look). It doesnt add much bulk or weight to the phone, but it is slightly bulkier than the previous case I reviewed. Hopefully Otterbox will come up with a case for the i927 soon, I'm quickly tiring of these cases...
L4T

http://www.daydeal.com/home.php?cat=6439
Haven't tried any of them but their stuff is good.

Body Glove Captivate Glide
I just received the Body Glove two-piece case for the Glide. It's $30 from AT&T, but I got it from All4Cellular for less (it's also on Amazon for even cheaper, which is a bit annoying as it was out of stock when I last looked there). It's pricey, but highly reviewed on AT&T's site.
It looks high-quality (none of that gummy rubber sort of stuff) and fits snugly. A bit too snugly, actually, as it was fairly difficult to get on and (according to other owners) nigh impossible to get off. On the plus side, that means it's not going to just pop off in your pocket.
The case fully covers the back of the phone (except for holes for the camera, flash, microphone, speaker, and buttons), and on the front, it covers the bezel. It doesn't interfere with the sliding at all, though the front cover does stick out enough to potentially cause problems with the top row of physical keyboard keys. That said, the keyboard side of the front cover has a little cutout at the bottom that may alleviate that problem a bit. I haven't noticed any major difficulties typing so far.
As with any two-piece case, there's a gap between the pieces where the phone slides, so it's not going to protect from anything getting between the phone halves. Also, it only comes in one color--a metallic blue sort of look--so if that's not your thing, you're out of luck.
I'd give it four out of five stars, knocking off a star for the difficulty in getting it off, though I'd recommend it for the build quality.

Does anyone know of a otterbox case from another phone that would fit this one for protection? (commuter or defender)

And what about silicone cases? Soft ones I mean..

There's a Case Mate Barely There case now available for the Glide, you can find it on Amazon. Did anyone try it?

Mom is with ATT so she picked the Captivate Glide cuz I have Epic. LoL Basically, she also want a slide-out keyboard.
I ordered this for her on eBay.
http://www.daydeal.com/product.php?productid=64678
One problem, the sellers posted different quality. Some say hard plastic and some say rubberized. I went with a seller that said rubberized with good reviews. $7 with free shipping. I'm waiting on that to arrive and see how it feels

Just a question, since I'm not a native english speaker:
what does 'rubberized' mean? Does the term refer to a hard case with soft grip or to a flexible silicone-like case that you can even bend and it keeps the shape?
Thanks

clpo13 said:
I just received the Body Glove two-piece case for the Glide. It's $30 from AT&T, but I got it from All4Cellular for less (it's also on Amazon for even cheaper, which is a bit annoying as it was out of stock when I last looked there). It's pricey, but highly reviewed on AT&T's site.
It looks high-quality (none of that gummy rubber sort of stuff) and fits snugly. A bit too snugly, actually, as it was fairly difficult to get on and (according to other owners) nigh impossible to get off. On the plus side, that means it's not going to just pop off in your pocket.
The case fully covers the back of the phone (except for holes for the camera, flash, microphone, speaker, and buttons), and on the front, it covers the bezel. It doesn't interfere with the sliding at all, though the front cover does stick out enough to potentially cause problems with the top row of physical keyboard keys. That said, the keyboard side of the front cover has a little cutout at the bottom that may alleviate that problem a bit. I haven't noticed any major difficulties typing so far.
As with any two-piece case, there's a gap between the pieces where the phone slides, so it's not going to protect from anything getting between the phone halves. Also, it only comes in one color--a metallic blue sort of look--so if that's not your thing, you're out of luck.
I'd give it four out of five stars, knocking off a star for the difficulty in getting it off, though I'd recommend it for the build quality.
Click to expand...
Click to collapse
I got the same one from AT&T.
I agree with your comments. This case is much better quality than the no-name clear ones I've seen elsewhere. It is a pain to install / remove, but I like it tight, lol. I've had cases for other phones where it comes off easy, and they become a pain in the @ss.
They are the most expensive I've seen, but worth the price if it saves your phone from just one concrete ground fall.
-Am

hard case with soft grip
or you can call it a "grippy" hard case

rafeee2 said:
hard case with soft grip
or you can call it a "grippy" hard case
Click to expand...
Click to collapse
Thank you

just ordered the 3 in 1 combo case/holster for about $18 with free shipping...hoping its worth the money, i like the idea of the holster but i have a feeling the case and holster will be made out of cheap plastic....

rafeee2 said:
There's a Case Mate Barely There case now available for the Glide, you can find it on Amazon. Did anyone try it?
Click to expand...
Click to collapse
in their official site i cant find anything about that case, strange.

Nex Fishbone Case Thoughts/Pics

Just thought I'd share some thoughts and pictures of a new case I got (I am a bit of a case junkie... usually end up with 10-15 cases per phone). Typically I either wouldn't be the first to post about a case (so I don't bother) or I don't feel strongly enough to share. I didn't see anything about this case, though... so here goes.
Link: http://www.amazon.com/gp/product/B0073YAAVK/ref=oh_o02_s00_i00_details
Various colors are available.
Notes: My device is the Verizon/LTE variant. This is a 2 piece case (black silicone base and red fishbone part).
Looks: I really think the case looks great, the pictures below won't do the colors justice but the black is a very nice matte black and the red is a very cool shade. The design is appealing, of course, or I wouldn't have purchased it... heh.
Fit: The fit is nearly perfect (might actually be perfect, this is the first time I'm ordering this style of case). One of the... ribs has a teeny tiny slight gap between it and the black base. It is not highly noticeable and I couldn't capture it well in a picture... but it's there.
I don't know if this is related to my phone being the VZW version.​I don't know if this gap will go away as the case "settles in" since it is pressed down easily and doesn't feel too tight.​I don't know if the case will fit with the extended battery, but since I have the extended battery at home I will test it out and report back.​
Feel: I really like the feel of the red part on my hand when I'm holding it. It's not any extra grip or anything, but it is comfortable. The side grippyness is sufficient to not be slipping out of your hand, but it's not as grippy as many other cases that have a more textured design.
Function: The lip is sufficient to protect the screen when face down. The only thing I don't really like about the case is that the button parts aren't super noticeable by touch. Don't get me wrong, they work perfectly and you can feel them just fine when you are trying to, but when I am not paying attention I find myself not being certain where they are for a moment or two. I will probably get used to this, though.
Hope that gives everyone the info they're interested in... if you have questions, feel free to ask.

Thanks for the write up and pics. That case looks awesome. Curious if it would fit with the extended battery. Hope to hear back from you about it.
Sent from my Galaxy Nexus using Tapatalk

I tried it with the extended battery...
The silicone part fits perfectly, the fishbone part is a little close but does fit too.
The... spinal parts at the top on the back are slightly raised. Just a bit, only an issue if you are pretty nit picky... But it definitely fits and the clips/ribs and top/bottom fit perfectly.

Happy to confirm that the slight gap on one of the ribs has gone away over night. The case fits perfectly now (regular battery). Still fits good, but not great with the extended battery (might improve if left alone over time).

Thanks again. I might check into getting one of these on payday. The price isn't too bad even if I end up not liking it.

Zomb!e said:
Thanks again. I might check into getting one of these on payday. The price isn't too bad even if I end up not liking it.
Click to expand...
Click to collapse
No problem... good luck if you decide to buy it, hope you enjoy it. I myself am a case junkie. I've only had the Galaxy Nexus for 2 weeks and have 6 cases and I still have 20 or so for my last phone (Epic 4G Touch).

How is the silicone? Is it a dust/lint magnet and is it a chore to get out of medium to snug fitted pants?

redrapt0r said:
How is the silicone? Is it a dust/lint magnet and is it a chore to get out of medium to snug fitted pants?
Click to expand...
Click to collapse
No issues getting it in and it of pockets (even the tighter "cell phone pockets" a couple of my pants have).
It does acquire a bit of dust like you'd expect, but FAR less than most silicone cases I've had (guessing because a lot of it is covered/broken up by the fishbone part).
I tend to be pretty nit picky and with this case I do not feel the constant urge to clean it.

How "protective" would you say it is?
Just ordered a nexus and am looking at cases my primary concern is protection, although I want a cool look too.
How do you think this would compare to come of the other cases in terms of protecting against drops? I figure a self-described "case junkie" might be the person to ask this sort of comparative question to

Ok, so this is all just my opinion... I'm not dropping my phone on the ground to support this, lol.
Both pieces (the silicone case and the red fishbone that locks it into place and secures it) are pretty secure and well made. The lip around the face is a good size (not so tiny that it is insignificant and not so big to cause usage issues).
I won't sit here and pretend I have a rating system for this stuff, but I have some cases that feel like they won't protect anything beyond it sliding around the desk or a gentle fall onto some clouds/carpeting and some cases that feel like they will do their drop and protect it from a moderate drop and fall. This case falls into the latter/better group.
I like the appearance, but not so much that I'd use it if it was a piece of crap. Thankfully, it seems well made to me.

Woah
what struck me on first glance is the design!
Its quite eye catching
I'm just not sure if it is durable...

This look good. I bought one
Sent from my Galaxy Nexus using Tapatalk

Any other (device) nudists here?

For a while now, it has seemed like i am the only nudist when it comes to devices. Specifically since the iPhone 3G came out, practically no one *DOESN'T* have some huge ugly bulky plastic monstrosity on their device.
I have had several smartphones (see sig), and have never used a case or screen protector with them. I have also never dropped one; i know what i paid for it, i know what will happen if i drop/smack it, and i know what a pain in the rear setting up a new one would be. I take care of my equipment (i also work in HD productions and have lots of photo/video/audio gear, equipment, and rigs). I hate the otterbox or similar ones (remind me of coffins) and i've seen people crack screens or damage their devices with them on, or simply fall apart in a year. i also hate the feel of screen protectors, and how they affect what should be a fantastic tactile UI experience.
I am not above using one, specifically with this device, as it is very slippery like the iPhone 3G was, but i can't find anything remotely close to what i'm after, which is basically a tight white condom, so i am a nudist. I did have a silicone case on the iPhone for all of 2 days, mostly because my then-GF had bought me the device and case, before i removed it. With the Atrix, the AT&T salesman literally freaked when i said 'i don't use cases'; he told me i would break it in a month. It just started having digitizer dead spots. My GF and i travel extensively for work and fun; we are both device nudists; she's still rockin' her Atrix, and hers had fallen from her purse a few times with no harm done thus far. My Atrix has been to and used on five (counting Turkey as *technically* Asia, and middle east as Africa) continents, the iPhone came with me when i lived in France in 2009, and even the HTC Tilt/8925 made it to Europe and back a few times, back when WinMo6.1 was still kickin' it (Cube .cab!) Point is, crazy high/low temperatures, crazy humidity or totally dry, low pressure, high pressure, whatever.
Basically just wondering what the point of buying a device so light, so thin, and with gorilla glass, if you are going to immediately throw on a thick fat heavy case and a screen protector that is both prone to scuffing and dampens the UI experience. Since the iPhone in '09, i haven't had a laptop and now with Android certainly don't need one; usually all i carry is my mobile, wallet (hope to ditch that soon too), smokes/lighter, and keys. Shoot, half the time i carry only smokes/lighter, mobile, and single car/house/hotel/etc key; and leave everything else.
Of everyone i know, only a surgeon friend of mine became a 'nudist' (he prefers the term 'purist') since we had met; he still has his iPhone 3G.
Any other 'purists'/'nudists' out there?

Cool story bro, but when you dont like accessoires, why bother to post in that particular forum?
Sent from my GT-I9300 using xda app-developers app

htcsnap93 said:
Cool story bro, but when you dont like accessoires, why bother to post in that particular forum?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
because i would love to find a very thin, silicone based flexible case to use mostly so the phone isnt so slippery. literally condom thin. i just dont like accessories that turn the phone into some sort of isometric brick. if a superthin skin existed i would have bought and used it on every device. instead its all hard plastic/rubber/thick silicone. and all my searches have turned up nil.

haha same as you man . with my s1 I used a case for abt a year then took it off as the phone became less valuable (and was a bit roughed up anyway). same with the screen protector. since then I've dropped it a hundred times without cracking the screen (almost all the silver bezel is chipped off lol). the only mod I did was replace the back cover for a colorful fake yelliw one (better grip, less greasy/smudgy).
I've had my s3 for abt 2 weeks and its been sweet. seeing as its already significantly bigger than the s1, I couldnt bear to put a big case on. however, I was interested in the slim flip cover that replaces the battery door - it seems like a good way to protect the screen a little. I have ordered a fake one for abt 5 bucks on eBay, yet to arrive, but maybe you should check it out? the reason I'm going fake first is that the real one is pricey, and I dont know how practical it will actually be yet.

Slade8525 said:
because i would love to find a very thin, silicone based flexible case to use mostly so the phone isnt so slippery. literally condom thin. i just dont like accessories that turn the phone into some sort of isometric brick. if a superthin skin existed i would have bought and used it on every device. instead its all hard plastic/rubber/thick silicone. and all my searches have turned up nil.
Click to expand...
Click to collapse
DBA thin grip?
I have an otterbox because I engineer factories. So 50 percent Im on site calling. Also since Im still an Intern I cant afford to break something. So i guess that is why people buy bulk.
Sent from my GT-I9300 using xda app-developers app

me to, like phone without case.. but sometime texting in crowded place need more safety..
so i buy GUM for iphone and handlinker for safety, so my phone didnt slip from my hand

I used to use an n8 and that phone was a unbreakable machine, dropped that phone so many times and not one crack on my screen and only small scruff marks on the corners of the back original case (never used protection for it)
The original cover was a thick and sturdy case that protected the device from falling and did its job well.
When I got my s3 after seeing how thin the back was and how easily it would come off if it fell and doubted it would protect the glass the first thing I did was buy a case.
Cause I'm a bit clumsy sometimes
Sent from my GT-I9300 using xda app-developers app

edit

the bumper obviously protects the screen, however some designer went through a lot of trouble to make sure this phone fits my hand perfectly. why mess with it?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app /miui/kt747

I'm not using one right now, but I have 2 cases in the mail. Kids in my town think it's fun to snatch phones (I don't live in a bad neighborhood just some bad kids pass through here) and the extra grip that my Galaxy S2 Skyrocket case provided foiled a would be thief's snatch and run. Not to mention that I have sweaty hands so not having a case for a long time will be my own demise.
Stock ICS on my S3

Why not actually use a condom, one of the non-lubed ones.
If the condom is transparent enough and doesn't interfere with the touch screen, then it's the way to go, isn't it?
At least, now that Android viruses (virii?) are starting to appear, you'll be protected!

Simonetti2011 said:
Why not actually use a condom, one of the non-lubed ones.
If the condom is transparent enough and doesn't interfere with the touch screen, then it's the way to go, isn't it?
At least, now that Android viruses (virii?) are starting to appear, you'll be protected!
Click to expand...
Click to collapse
I had this case: http://www.amazon.com/Acase-Superle...689520&sr=8-3&keywords=Acase+Superleggera+Pro but it made the phone so much thicker and heavier, I stopped using it. I'm taking my chances using it naked for now.

Has anyone checked out IZag it's a thin clear protective skin I had it on the screen of my old att tilt for over two years and never scratched or scuffed it I think they make it for the whole phone now my one friend said best buy puts it on for you and gives you a warranty on the protection if it peels off he had a I phone though but I'm sure they would make it for our phone to. Myself I have a ballistic case for when I'm not at home but as soon as I get home I strip down.
Sent from my SCH-I535 using xda premium

Ion CarbonGrip Case:
http://www.amazon.com/gp/product/B0..._m=ATVPDKIKX0DER&pf_rd_r=1N7XMPT1EK1PXCEVCHM8
I'm the same way with my phone. I like it the way it comes - slim and beauitful - and just wanted a minimalist case with good impact protection. Couldnt be happier with this case. It fully protects from any angle, and is rigid yet cushioned. It has thick clothlike material glued on both sides of a hard plastic core giving it a gauze bandage type of feeling. Imagine several bandages stacked together on a piece of hard plastic, this is the way it feels. Very shock absorbant. Yet the whole thing is like 1-2 millimeters thick, and you can see how minimalist it is.
I posted some pics and comments about it in a separate thread but not too many people were interested. It's too bad because this is an excellent case and people are really missing out. It doesnt look like much, but man its beautiful and oh so effective.
Dont buy the white one. It has white rubber adhesive along the edges that gets a little dirty. The black one though... Really loving it. It looks better in real life than in the picture. I have a black carbongrip with a white sprint SGS3, never plan to look at another case again.

all i am going to recommend is Wrapsol. IMO, best skin. texture is way better than Zagg IS or any other skin i've dealt with. It is on all of my products (iphone, macbook pro, ipad, galaxy s2) because i dont like cases. no orange peel. good grip for the back. very thin. gives it a matte look. they have replaced my lifted skin for free.
however the one they sell is for the s3 is the international version. theres a cutout in the middle for the Samsung brand. you can always buy an OEM internationally battery cover for cheap and apply it to that and use it on your carrier version.
www.wrapsol.com

I recommend you look at DBA cases. I have the Ultra and I think it's THIN! I have a white S3 and went all white (TPU & PCU). It looks like I don't even have a case on. If you want thinner, I don't own it but from the picture that was posted on here, the DBA Thin is thinner than the Ultra. I originally had a UAG case which I thought was thin. I went with the Ultra instead of the Thin due to the drop protection. The Ultra supposedly has the same drop protection as the UAG. Holding the Ultra in hand, it really is hard to believe it could protect from a drop, but it does.

I like the feel of the phone sans case, but there is always a part of me that worries about that one drop. So I opted for a case that added minimal bulk to the phone whilst giving me the benefit of a kickstand (I travel for work. Need to watch some movies.)
Body Glove Elite case

YUP...I never liked the thought of a case on such nice looking devices. But now I have a thin one.
Why I bought a thin case?
- so I don't have to continually wipe finger prints
- when I lay my S3 on it's back, it doesn't wobble nor touch the camera lens housing
- grip...extremely important (mine has cross hatching on the back)
- the beveling on the edges on a stock S3 when squeezed by your hand, tends to force the phone to spit OUTWARDS out of your hand! On the Htc HD2 I own, it is the opposite angle, the harder you gripped, the more it will snuggle into your hand.
- never really liked the high gloss pebble blue that much, so my case (no pun intended) I now have a dark charcoal matte finish.
- Oh and how about protection? Even the worst case adds some layer of protection. Even just laying the S3 down on a surface day in and day out can eventually lead to scuffs....obviously.

I searched again today for an hour and still cannot find something that is basically just a very thin silicone jacketing; just enough to enhance grip, protect the screen and finish, and yet keep it thin, light, and elegant.
A nudist i shall continue to be, i guess.

I Love my Galaxy s3 nude! so smooth .. so soft. I tried a few cases and screen protectors but had to go back in the nude

OtterBox Armor Review

Bought this case new from ebay knowing about its few problems being reported like the proximity sensor, call problems, and audio issues, but still preferred this over the lifeproof simply for its protection. When i first received it, my initial reaction was "wow, its here, and its HUGE!" But i carefully disassembled it and clean it out just in case, water tested it (passed), dried it off, and finally put my phone in its new suit of armor. It really made the phone huge, and i mean huge, but i honestly dont mind the added bulk because of its substantial protection and it still feels very comfy in hand and doesnt hinder the phones functionality at all. Speaker for music also plays very loudly and crystal clear unlike other reviewers have stated. I think its a great case to buy and kind of essential if you have a very physically active life. Now to the cons (although their aren't many): Unlike many other reviewers of the white version have stated, i dont have call proximity issues, only thing that happens related to proximity is when i turn the phone over to face down while playing music, it pauses, but thats expected because i had that motion option enabled. Next, phone calls work fine and i hear people just fine, but the caller on the other end may have a problem hearing you sometimes. But it rarely happens and most times they can hear you. Easy fixes are bluetooth and earphones. Lastly, the home button definitely requires more pressure to press and the menu/back "buttons" are a little harder to get to but you'll get used to it. Thats the only thing "wrong" with this case honestly and its still excellent to have. I would highly recommend it. If you dont mind a little bulk, get it. Again, great great case :good:

I have a brand new one in original packaging from otterbox if anyone wants, contact me through dm or 6785162209

Personally speaking, at that kind of bulk, I'd rather shove in a 7200mAh Anker. Protection is nice and all but severely handicaps the phone IMO. If you like bulk, might as well triple your battery life.
Furthermore, if it does get scratched/cracked/broken, it's fairly easy to replace (for most members here). For example, you can swap the camera lens for a few bucks if it does get scratched.
I've had my GS3 for almost two years now. Been completely nude the whole time. No screen protector, nothing. There are many surface scratches on the screen which you can only see if you look at it while the screen is off under a super, super bright light. Doesn't affect the image quality at all. Outside frame (the gray part) is a little cracked in few places. Not a big deal.
Runs flawless on CM 10.2.1. Undervolted almost 100mV across the board.
I used to be OCD, but decided to save my health instead.

Aftcomet said:
Personally speaking, at that kind of bulk, I'd rather shove in a 7200mAh Anker. Protection is nice and all but severely handicaps the phone IMO. If you like bulk, might as well triple your battery life.
Furthermore, if it does get scratched/cracked/broken, it's fairly easy to replace (for most members here). For example, you can swap the camera lens for a few bucks if it does get scratched.
I've had my GS3 for almost two years now. Been completely nude the whole time. No screen protector, nothing.
Click to expand...
Click to collapse
I myself looked for waterproof. I too believe as you do and went naked on previous phones. But now with a toddler and my part time job in swimming pool service, waterproof was the selling point.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

I personally liked the armor series for my S3. I only stopped using mine due to needing to put my phone in my pocket and the armor didn't quite fit the bill. I use my lifeproof nud for daily use at work but when out playing around or working at the house I still use my armor series. And you definitely can't beat the otterbox warranty.

bogdaryl said:
I personally liked the armor series for my S3. I only stopped using mine due to needing to put my phone in my pocket and the armor didn't quite fit the bill. I use my lifeproof nud for daily use at work but when out playing around or working at the house I still use my armor series. And you definitely can't beat the otterbox warranty.
Click to expand...
Click to collapse
The only thing that makes me take mines off from time to time are the back and menu buttons but once i have it on it rarely comes off. And yea otterbox has great customer service imo. I love my case

aybarrap1 said:
I myself looked for waterproof. I too believe as you do and went naked on previous phones. But now with a toddler and my part time job in swimming pool service, waterproof was the selling point.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Fair enough. I suppose we don't always have ideal circumstances to our liking.

NexusS4gFreak said:
The only thing that makes me take mines off from time to time are the back and menu buttons but once i have it on it rarely comes off. And yea otterbox has great customer service imo. I love my case
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-T999 using xda app-developers app

Aftcomet said:
Fair enough. I suppose we don't always have ideal circumstances to our liking.
Click to expand...
Click to collapse
LOL...I love my phone being slim and I can live with scratches. But after a few near misses with my toddler son and getting soaked a couple of times on the job, I decided I would have to give in. Bring without my phone even for a day would screw up my schedule. Amazing how much I depend on it.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

I've also bought this case and it turned out to be just what I was looking for. Before I've had Griffin survivor which would be good enough for me except two things, it was not that easy to remove (I prefer naked S3 while not in a hostile environment) and it scratched my S3. After the latter happened I've immediately sold it.
But the reason to post is for everyone with menu/back/home buttons problem. After a proper inspection I've found out that the back cover of the case doesn't give enough support for installed phone. If the phone is fully pushed into the case there is approximately 1.5mm gap between the phone and the back cover. So after first push on menu/back/home button even if the phone is inserted all the way in to the case, the phone backs up a little and that gap moves from the back to the front. In order to solve this problem I've ordered 1.5mm thick silicone sponge to fill the gap between the phone and the back cover. One thing that bothers me about this is that waterproofness of the case might be broken if 1.5mm thick sponge is too much and even bigger problem is how test waterproofness as I don't want to sacrifice my phone. I'll report any pros or cons about my modification. If it solves this problem I'll post some pictures of modification.

I've had the Acase Superleggera Pro Dual Protection Case on my S3 since I bought it and I love it. I've dropped it so many times and not noticed any difference in performance. And it's not super bulky like the other 2 layer cases. It's also less than $10 at Amazon these days.

D00ky said:
I've also bought this case and it turned out to be just what I was looking for. Before I've had Griffin survivor which would be good enough for me except two things, it was not that easy to remove (I prefer naked S3 while not in a hostile environment) and it scratched my S3. After the latter happened I've immediately sold it.
But the reason to post is for everyone with menu/back/home buttons problem. After a proper inspection I've found out that the back cover of the case doesn't give enough support for installed phone. If the phone is fully pushed into the case there is approximately 1.5mm gap between the phone and the back cover. So after first push on menu/back/home button even if the phone is inserted all the way in to the case, the phone backs up a little and that gap moves from the back to the front. In order to solve this problem I've ordered 1.5mm thick silicone sponge to fill the gap between the phone and the back cover. One thing that bothers me about this is that waterproofness of the case might be broken if 1.5mm thick sponge is too much and even bigger problem is how test waterproofness as I don't want to sacrifice my phone. I'll report any pros or cons about my modification. If it solves this problem I'll post some pictures of modification.
Click to expand...
Click to collapse
I tested its waterproof function without phone first and then finally just did it repeatedly with the phone and it hasnt failed me yet, hopefully never. And also ive noticed this gap, i wouldnt recommend filling it because it may compromise as u stated

monnaliza said:
I've had the Acase Superleggera Pro Dual Protection Case on my S3 since I bought it and I love it. I've dropped it so many times and not noticed any difference in performance. And it's not super bulky like the other 2 layer cases. It's also less than $10 at Amazon these days.
Click to expand...
Click to collapse
For everyday protection sure it may be good, but when it comes to 10ft drop, water, being hit, stomped on, and numerous other things, the armor case is the best.

monnaliza said:
I've had the Acase Superleggera Pro Dual Protection Case on my S3 since I bought it and I love it. I've dropped it so many times and not noticed any difference in performance. And it's not super bulky like the other 2 layer cases. It's also less than $10 at Amazon these days.
Click to expand...
Click to collapse
As I've said if not in hostile environment in my case this is mostly dusty air and greasy surfaces, I prefer my S3 naked. So Otterbox Armor is needed.
NexusS4gFreak said:
I tested its waterproof function without phone first and then finally just did it repeatedly with the phone and it hasnt failed me yet, hopefully never. And also ive noticed this gap, i wouldnt recommend filling it because it may compromise as u stated
Click to expand...
Click to collapse
I tried with 1.5 mm foam and it was just a little too much. Now I am waiting for 1mm which I think it should work. As I've already said, in my case waterproofness is not really needed but I wouldn't like to brake it. Will report again.

D00ky said:
As I've said if not in hostile environment in my case this is mostly dusty air and greasy surfaces, I prefer my S3 naked. So Otterbox Armor is needed.
I tried with 1.5 mm foam and it was just a little too much. Now I am waiting for 1mm which I think it should work. As I've already said, in my case waterproofness is not really needed but I wouldn't like to brake it. Will report again.
Click to expand...
Click to collapse
I finally got 2mm foam as 1mm is hard to get. 2mm foam goes into gaps between ribs on the rubber on the back cover of the case. So this just might do the trick as the case closes ok.

The for the review, I have an Otterbox Defender and love it to death, but I've been thinking of buying one of these.

i have the Acase Superleggera Pro Dual Protection Case on my S3 and it is great!

Just got my new otterbox armor today!! Love it so far! Any way to tell if it's legit and not a fake? Lol... Paranoid I guess?

DMF1977 said:
Just got my new otterbox armor today!! Love it so far! Any way to tell if it's legit and not a fake? Lol... Paranoid I guess?
Click to expand...
Click to collapse
Not sure but I think that there's no fakes around. Enjoy it.

D00ky said:
Not sure but I think that there's no fakes around. Enjoy it.
Click to expand...
Click to collapse
Thanks!! But I'm sure there are plenty of fakes around...