There is nearly only 3 types of cases out at the market.
First the hard plastic cases that are coming in 2 parts. There are the glossy ones and the trubberized ones in a wide variety of colors and styles at ebay or Amazon. The quality is OK but not perfect. What I like is the good protection in combination with the acceptable increase of size. The problem is that you nearly can't remove the front part of the case without breaking the very small bars fixing the case to the device. I like the rubberized ones most. They are looking more stable to me than the glossy ones. With the case it's more difficult to slide out the QWERTY keyboard. But it's acceptable. What I like very much is the protection of the on/off button and then loudness buttons. Because without the case I öfter press these keys withooany will.
Then there are the leather cases. There are horizontal and vertical ones. I tried to use the ones for the Samsung Galaxy S2 also, they fit. But of course not together with the hard plastic case together. For that I will try cases made for the HTC Sensation XL. I will share my experiences as soon as I get the cases.
The third category are cases that are blocking the hardware keyboard. That unacceptable for me. I tried rubber cases for the Samsung Galaxy S2 and it worked for one but the fitting is not not really good. The thickness of the device is quite different from most other smartphones.
Hope I could help a little bit and will share my upcoming experiences.
Thanks for checking out the cases, did they the leather/rubber ones block the camera at the back or did it have the correct position for the opening?
The leather ones I tried are for pulling out the device before use.
The rubber one I tried had a big camera hole on the back. But I forgot to check the other connector holes but if I remember correctly some cutting work has to be done. But this is possible with the right tools. Sharp knives and hole cutters for leather/paper.
Best thing is to try the case at a shop. Surely some fits better than others. But I think the Galaxy S2 category is the best you can get. The Galaxy Note ones could be also work, because it's taller but thinner.
The first category cases are made for the device and aren't blocking anything.
I wonder if anyone has tried the one-piece Speck cases yet (can't post links yet, but a Google search for "speck captivate glide" should bring up the page on Speck's site). They look good, but I'm curious if they restrict the sliding mechanism or block the keyboard at all.
fatxdad said:
(edited for brevity)
Click to expand...
Click to collapse
Just wanted to share my review, got a hard rubberized case on Amazon from ezbuy123. It's a 2-piece, snap-on. In the past, I've used Otterbox on EVERYTHING, but since they dont have an i927 case out yet, I figured I'd take a chance. The build quality is probably a 3.5/5 - it's hard, it's plastic, it's rubberized, that all is true. The edges of the case around the keyboard area are already starting to get chewed up, and the rubberizing doesnt have any real texture to speak of, I feel like I'm going to drop it when I use it. On the plus side, it isnt a weird neon color, and it doesnt add much bulk or weight to the phone.... All in all, I'd be pressed to give it 4/5 overall, it will definitely be replaced with an Otterbox if they ever decide to make a case for the i927.
Speck Sureslider Case
So I just received the Sureslider case today. I bought it for 24 dollars (from versiomobile before they charged 35 ).
Here's my review on it:
It's a one piece piece that has a hard plastic back with polycarbonate. On the front, it's made up of TPE (thermoplastic elastomer). The TPE gives the case a lip from the screen of the phone. It still slides when you put it on its face but not by much. Only the top part actually clips onto the phone. The back plate just kinda sticks to the phone.. somewhat. There's basically no restriction when you're sliding it, it feels like it's not even there. Regarding the top keys of the qwerty keyboard, it might've moved a nanometer, but not to significant to affect your typing.
Honestly, I don't think the price of $35 is worth it. I'd say it'd be more fair around 13 dollars. It also comes with a one-year warranty, so maybe that's where the high price came from?
The Sureslider case is technically a "one-piece" but when I got it, somehow the connection between the bottom and top part became loose and the top part came out. Needless to say, i thought it was going to be an easy fix. It wasn't . You can't just "slide" it into one piece since there's a hook and a little clip at the bottom to provide stability. After I managed to get the piece together, I went through the packaging, and there was this small instruction slip. It said "If the case becomes separated by mistake, align the two pieces and fit back together."
If you have any questions, feel free to ask.
I got the rubberized texture case from ebay (shop4phree*). 5 bucks included shipping. Just to get something on the phone quick before I scractched it. I have to say for being so cheap it has help up surprisingly well. I was going to go for a higher end case at a later time but it's now going on 2 months and I haven't felt the need to switch. The only drawbacks I can see is it interferes with the smoothness of the slide out keyboard (requires a little more finger power to push it up) and the extra bulk it adds makes your top row of keys a little tight when typing(especially with big fingers).Ive dropped my phone a couple of times and it has held intact.
Im a cheap bastard so my $5 case works great for me.
Amzer cases
Well i managed to snap the feelers on my first case (the black rubberized one), so I've moved on to an Amzer case from Amazon. It's a 2-piece, snap-together advertised as "one piece". The build quality is probably a 3/5 - it's hard, it's plastic, it's rubberized on the back half, but the front half is clear hard-poly that looks awful (definitely not at all like what the pic on Amazon makes it look). It doesnt add much bulk or weight to the phone, but it is slightly bulkier than the previous case I reviewed. Hopefully Otterbox will come up with a case for the i927 soon, I'm quickly tiring of these cases...
L4T
http://www.daydeal.com/home.php?cat=6439
Haven't tried any of them but their stuff is good.
Body Glove Captivate Glide
I just received the Body Glove two-piece case for the Glide. It's $30 from AT&T, but I got it from All4Cellular for less (it's also on Amazon for even cheaper, which is a bit annoying as it was out of stock when I last looked there). It's pricey, but highly reviewed on AT&T's site.
It looks high-quality (none of that gummy rubber sort of stuff) and fits snugly. A bit too snugly, actually, as it was fairly difficult to get on and (according to other owners) nigh impossible to get off. On the plus side, that means it's not going to just pop off in your pocket.
The case fully covers the back of the phone (except for holes for the camera, flash, microphone, speaker, and buttons), and on the front, it covers the bezel. It doesn't interfere with the sliding at all, though the front cover does stick out enough to potentially cause problems with the top row of physical keyboard keys. That said, the keyboard side of the front cover has a little cutout at the bottom that may alleviate that problem a bit. I haven't noticed any major difficulties typing so far.
As with any two-piece case, there's a gap between the pieces where the phone slides, so it's not going to protect from anything getting between the phone halves. Also, it only comes in one color--a metallic blue sort of look--so if that's not your thing, you're out of luck.
I'd give it four out of five stars, knocking off a star for the difficulty in getting it off, though I'd recommend it for the build quality.
Does anyone know of a otterbox case from another phone that would fit this one for protection? (commuter or defender)
And what about silicone cases? Soft ones I mean..
There's a Case Mate Barely There case now available for the Glide, you can find it on Amazon. Did anyone try it?
Mom is with ATT so she picked the Captivate Glide cuz I have Epic. LoL Basically, she also want a slide-out keyboard.
I ordered this for her on eBay.
http://www.daydeal.com/product.php?productid=64678
One problem, the sellers posted different quality. Some say hard plastic and some say rubberized. I went with a seller that said rubberized with good reviews. $7 with free shipping. I'm waiting on that to arrive and see how it feels
Just a question, since I'm not a native english speaker:
what does 'rubberized' mean? Does the term refer to a hard case with soft grip or to a flexible silicone-like case that you can even bend and it keeps the shape?
Thanks
clpo13 said:
I just received the Body Glove two-piece case for the Glide. It's $30 from AT&T, but I got it from All4Cellular for less (it's also on Amazon for even cheaper, which is a bit annoying as it was out of stock when I last looked there). It's pricey, but highly reviewed on AT&T's site.
It looks high-quality (none of that gummy rubber sort of stuff) and fits snugly. A bit too snugly, actually, as it was fairly difficult to get on and (according to other owners) nigh impossible to get off. On the plus side, that means it's not going to just pop off in your pocket.
The case fully covers the back of the phone (except for holes for the camera, flash, microphone, speaker, and buttons), and on the front, it covers the bezel. It doesn't interfere with the sliding at all, though the front cover does stick out enough to potentially cause problems with the top row of physical keyboard keys. That said, the keyboard side of the front cover has a little cutout at the bottom that may alleviate that problem a bit. I haven't noticed any major difficulties typing so far.
As with any two-piece case, there's a gap between the pieces where the phone slides, so it's not going to protect from anything getting between the phone halves. Also, it only comes in one color--a metallic blue sort of look--so if that's not your thing, you're out of luck.
I'd give it four out of five stars, knocking off a star for the difficulty in getting it off, though I'd recommend it for the build quality.
Click to expand...
Click to collapse
I got the same one from AT&T.
I agree with your comments. This case is much better quality than the no-name clear ones I've seen elsewhere. It is a pain to install / remove, but I like it tight, lol. I've had cases for other phones where it comes off easy, and they become a pain in the @ss.
They are the most expensive I've seen, but worth the price if it saves your phone from just one concrete ground fall.
-Am
hard case with soft grip
or you can call it a "grippy" hard case
rafeee2 said:
hard case with soft grip
or you can call it a "grippy" hard case
Click to expand...
Click to collapse
Thank you
just ordered the 3 in 1 combo case/holster for about $18 with free shipping...hoping its worth the money, i like the idea of the holster but i have a feeling the case and holster will be made out of cheap plastic....
rafeee2 said:
There's a Case Mate Barely There case now available for the Glide, you can find it on Amazon. Did anyone try it?
Click to expand...
Click to collapse
in their official site i cant find anything about that case, strange.
Related
So the first thing I noticed was that this is not a slider, but a front-and-back snap case. The product description says "Unique snap together design and opening slot makes putting on and removing your case easy" but for some reason thought it was a slider like the Surface II for the Captivate. So, it's not their fault I misunderstood.
Since the front bezel cover is so thin, my initial impression is that it seems a little flimsy. The back cover is also quite thin and has no lining like other Seidio cases. I think this was a conscious decision in order to keep the case as slim as possible. The fit is quite precise, so I don't think the lining would really make much difference as there is no movement within the case.
Although the front bezel piece seems flimsy at first, it feels quite sturdy once you snap it to the back cover. I do have some concerns the clips that snap together will wear down over time if you remove the cover frequently. Only time will tell on that point.
It has Seidio's "signature soft touch finish" which is like a somewhat rubberized matte texture. It's quite nice, but attracts prints if you have oily fingers.
Overall, the fit is pretty much perfect and the cutouts are precise. It's very thin and has a nice texture. Of the six cases I have, it's certainly the nicest. It does, however, cost about as much as the other five cases combined - $29.95.
At $19.95, I'd probably recommend it in a second. At $30 I have some reservations, namely the long term durability of the clasps that keep the two pieces together.
Vibrant case wont work
should be gettin mine tomorrow....
i think they have 6 month warranty which actually does work. thats another big plus with this company.
kolyan said:
i think they have 6 month warranty with actually does work.
Click to expand...
Click to collapse
Good to know. Hopefully won't have to use it.
Thanks for the review.
I'm still sticking to my white mesh case. I like really light and almost-not-there type of cases.
Thanks for the review, mine should be here within a day or so.
I ordered using the coupon code XMAS15 that was posted here. Not certain it's still valid though as the poster said it may expire on the 19th.
To the OP, how does the phone feel in your hands compared to what you had previously?
Also, did your volume buttons ever rattle? This is my only hesitation as the silicone case from t-mobile prevents the rattles I have from the volume rocker (which is loose).
s15274n said:
Thanks for the review, mine should be here within a day or so.
I ordered using the coupon code XMAS15 that was posted here. Not certain it's still valid though as the poster said it may expire on the 19th.
To the OP, how does the phone feel in your hands compared to what you had previously?
Also, did your volume buttons ever rattle? This is my only hesitation as the silicone case from t-mobile prevents the rattles I have from the volume rocker (which is loose).
Click to expand...
Click to collapse
For reference, I've had TPU's, hybrid TPU/Plastic (the one with hard clear back), a generic version of the Barely-There, and a flexible plastic perforated case (XMatrix Cover from DayDeal).
The added size and weight is similar to the XMatrix perforated case. It's not as slim as the Barely-There style cases, but I think it's definitely lower profile than TPU or silicone.
The finish is nearly the same as the Barely-There knock off I have, but seems a little more durable (the coating on the old case started to come off within days). It's smooth, almost suede-like, but has a bit of tack when held in the hand. When put on a smooth surface, like a desk or on wood trim in a car, it does not stick at all. This is a bit of a negative for me. One thing I like about TPU cases is that they kind of stick when you lay them on a smoother surface (I usually put my phone on the wood trim next to the gear shift in my car) but are not tacky otherwise.
As for the volume buttons, mine are not loose so I can't really comment on that issue.
One other thing I've noticed in the last few days of using the case, is that bezel cover is attached to the bottom part in only a few spots so there is some give in the areas that aren't clipped together. I think they should have added a couple more contact points on each side. It's not terrible, but I'm a bit OCD so it probably bothers me more than it would most other people.
I'll report back, should be here anytime now.. thanks man.
Case is good, very slim and feels good in hand, not perfect like other Seidio products. Like the review states, the case is NOT slide-on which sucks. I dont know why they used clip-on design, with slide-on case could have been even slimmer and more durable. Fit is also nice, but also not perfect, phone is just a little loose in case, not noticeable right away until you play with it.
kolyan said:
Case is good, very slim and feels good in hand, not perfect like other Seidio products. Like the review states, the case is NOT slide-on which sucks. I dont know why they used clip-on design, with slide-on case could have been even slimmer and more durable. Fit is also nice, but also not perfect, phone is just a little loose in case, not noticeable right away until you play with it.
Click to expand...
Click to collapse
After waiting around for the SGP Slider, I was also hoping this would be a sliding case.
I did get to hold a Captivate with the Innocase II, which is a slider, and the fit was pretty awful. It moves around a ton compared to this front-back type. I guess I'll take this style and more precise fit over slider with a bad fit.
Is it the bump on the Vibrant that is the main issue with a slider?
I was a bit let down to find this was a snap on the front/back design.
new coupon good through Sunday: MIX15
buy 2 products and get 15% off, free shipping for 2010
ordered one today from ebay for 18 and free shipping. thanks for the review and pics. Your pics make it look like it has a nice clean design in front.
djjeesh said:
ordered one today from ebay for 18 and free shipping. thanks for the review and pics. Your pics make it look like it has a nice clean design in front.
Click to expand...
Click to collapse
it is nice and clean. my nexus one case fits better, but they probably had to make it clip-on design i guess for Vibrant bump
Nice review! I can't help but feel like Seidio threw this product together in a hurry, after they realized there are people with Vibrants. It just looks cheap compare to their other offerings.
Just got it. initial impressions:
1 feels great in the hand. Looks good too.
2 I absolutely hate how easy it un-snaps.
3 I want to know their return policy till they have a legit case like the ones I am accustomed too from seidio.
4 it's much more difficult to press power now.
EDIT: okay, found out how to do the return, just waiting to hear back from them.
Has anyone used a ruggedized case? I bring my tablet EVERYWHERE and need something decent to protect it and was thinking about the Gumdrop cases. Any suggestions?
I use the Gform Extreme Sleeve 2 for extra protection. It says it fits the Ipad but I can confirm that it will fit the galaxy tab even with the stock book case on it. This is the best combination of protection and comfortable usability I have found.
It is kinda spendy but I bought both cases on ebay for less than retail and the samsung book case is definitely not necessary.
http://g-form.com/product/ipad-extreme-sleeve2/
If you don't think this case is beefy enough check out their torture test videos online.
http://g-form.com/technology/
Dose the gumdrop have a built in screen protector like the otterbox?
Sent from my PG86100 using XDA App
streetrider nick said:
I use the Gform Extreme Sleeve 2 for extra protection. It says it fits the Ipad but I can confirm that it will fit the galaxy tab even with the stock book case on it. This is the best combination of protection and comfortable usability I have found.
It is kinda spendy but I bought both cases on ebay for less than retail and the samsung book case is definitely not necessary.
http://g-form.com/product/ipad-extreme-sleeve2/
If you don't think this case is beefy enough check out their torture test videos online.
http://g-form.com/technology/
Click to expand...
Click to collapse
Always been curious about these cases that look like tires. Is there any advantage to this over an equally-thick material without the pattern? It seems to me like the tread on this would actually make it more likely to be damaged, not less. There's thin points (for puncture or pressure), and its easier to bend. And though there's probably a small difference in weight (though minimal; the heavier outer coating is larger than if it was flat), I can't imagine the tread makes it more fun to put into or take out of a bag. I've never used one though so I'm curious if there's something I'm not considering.
slack04 said:
Always been curious about these cases that look like tires. Is there any advantage to this over an equally-thick material without the pattern? It seems to me like the tread on this would actually make it more likely to be damaged, not less. There's thin points (for puncture or pressure), and its easier to bend. And though there's probably a small difference in weight (though minimal; the heavier outer coating is larger than if it was flat), I can't imagine the tread makes it more fun to put into or take out of a bag. I've never used one though so I'm curious if there's something I'm not considering.
Click to expand...
Click to collapse
There's something you've not considered. I think the design helps with the shock displacement. Maybe not, but it's what I figure.
Have you watched the videos? This is one a$$ saving case. LOL
If you're as tough on your tab as in the videos you crazy, but then again, stranger sh!t has happened on accident.
Sent from my GT-P7510 using one stinky finger.
I have one and love it. I got one for my daughter's kindle, too. It does have a built in screen protector but I didn't install it for my case (affects screen responsiveness and feels crappy). The screen is protected from being recessed behind protruding, reinforced edges, so if i drop it it won't break anyway. Also, the case prevents accidentally hitting the power button, which used to drive me crazy. I take my tab to work everyday...get lots of compliments on the case. The material and ridges let me sit it on my couch or lap and not slide out of position. They also feel nice in the hands. I have an otterbox defender case for my evo4g. That's a great case, but I recommend this grippier type of material instead for a tablet. My phone case lets me slide in and out of my pocket easily, but i want traction with my tablet case. I also tried one of those folding tablet cases, but they seem ridiculous to me.
I have the white gumdrop case for my tab 10.1. As far as protection it is great. The corners are reinforced and it has a built in screen protector. You will have no doubt that your tab is very well protected inside this case. It also offers a LOT more grip and security in your hands. The only downside it that is easily doubles the thickness and weight of your tab. With this case on you can easily drop, throw, bang etc.. without even a thought of damaging your tab.
I love my Gumdrop! I wrote an in-depth review if you want to check it out, with more pictures and details then you can shake a stick at, lol.
http://romrepo.info/viewtopic.php?f=50&t=664
I got a gumdrop case shortly after I got my tab 10.1, Love it. The silicon cover is very thick especially on the corners, the frame is solid and fits on the tab well, the cover and frame fit together very solid, and the screen protector is actually pretty good. It makes the whole setup look very clean, and my touchscreen is still very responsive with the gumdrop screen protector AND a static adhesive screen protector on.
tldr gumdrop A+
slack04 said:
Always been curious about these cases that look like tires. Is there any advantage to this over an equally-thick material without the pattern? It seems to me like the tread on this would actually make it more likely to be damaged, not less. There's thin points (for puncture or pressure), and its easier to bend. And though there's probably a small difference in weight (though minimal; the heavier outer coating is larger than if it was flat), I can't imagine the tread makes it more fun to put into or take out of a bag. I've never used one though so I'm curious if there's something I'm not considering.
Click to expand...
Click to collapse
Sorry for the delay, I am working on my capstone project for an EE degree and I have not been on the internets for fun since sunday.
I cannot say I would be able to point out any major advantages between the current design and one that is equally thick throughout, I would probably guess weight and cost. I believe the case is made of a fancy foam that stiffens on impact and does not seem like there is much of an outer coating over the foam but I have not yet cut into mine to find out.
The "tread" really has not caused me any problems getting this into or out of my backpack. The case is not frictiony like rubber but not so slippery that I am afraid to drop it when I carry it around either. I would say they found a happy medium between fly paper and a greased watermelon.
Overall I am very happy with this case and I recommend it to anyone who needs some heavy duty protection. I am even considering buying one for my laptop!
I got mine today left the screen protector off I have a zagg on mine super case I'm going to order one for the wifes Asus transformer
+1
I got my Tab last Fall and a Samsung Book Case shortly afterward. I had looked at the Gumdrop case and thought it'd be good to have, but didn't pull the trigger. That was a big mistake.
My son decided to grab the Tab from the kitchen counter & play games on it in the family room, but the dropped it on the tile floor before he got to the couch. I ended up with a $200 repair bill for a new screen. Needless to say, I had a Gumdrop waiting to be put on the tablet as soon as the repair was complete. This thing feels sturdy & strong. I just wish I had bought the case when I first saw it. I'd be $150 richer.
Got my gumdrop last week and really like it wasn't to sure bout the screen protector at first but its very responsive. Def worth the $.
Sent from my GT-P7500 using Tapatalk
I ordered one yesterday and then saw this thread. I checked this forum for case info before but didn't see the gumdrop case mentioned. I found it googling rubber corners galaxy tab 10.1.
Great to see positive reviews. Two concerns I have are:
- could the rubber case interfere with the wifi antenna?
- could the battery/electronics get too hot in it under normal conditions?
I notice that when you put your hand on the corner near the power button, the back and front get warm with no case. I imagine the glass acts as a heatsink. If you feel around the warm corner it doesn't spread to the rest of the glass. When I get the case I'll see if the warm area seems bigger.
In the manual it recs use in the temp range O-45c. I searched to see if 10.1's have overheating issues and I see anything to indicate that.
I've had the Gumdrop case on my Tab for about two months now & I've never had overheating issues.
Fat Tires said:
I've had the Gumdrop case on my Tab for about two months now & I've never had overheating issues.
Click to expand...
Click to collapse
Cheers, good to hear.
I just read somewhere that someone said that a silicone cover on their phone caused wifi loss, but others tested theirs and didn't have any loss.
I haven't noticed a decrease in my wifi reception. It works the same at home, the office, & in public spots like the coffee shop.
I don't think you'll notice any negative issues with the case other than added bulk & weight. Those are a fair trade for the better protection you'll get from the case.
Great, I'll do a proper test when I get it. I should try it with my Samsung Book Cover case as well.
I figure the thickness and security of it might make it easier to hold for long periods despite the weight. I like the idea of being able to grip it by the raised edge while carrying it, and I think I'll now have the confidence to bring it places and let other ppl actually play with it!
It looks like it might even survive a fall down stairs which even iBallz wouldn't
Hey NexVision
Which Gumdrop case fits your P7500? They don't list it on the site and it would suck to get a case and the buttons don't line up. Everywhere I look there seems to be a hundred different model #s (for each carrier, 4G and wifi only etc) and nothing seems to list which models are similar.
I want to chime in here with nothing more than +1 to everything positive mentioned here and No, I haven't had any of the problems asked about in this thread either.
Just wanted to do a review of some cases I bought and tried recently for my LGOG, hoping the info would be useful to other people. There are some other good and cheap options available online, but these are the ones I tried first-hand. I am really happy with all three of them, so here's the proof that sometimes you get more than you pay for...
First, a generic sleeve picked up at a local dollar store while I was waiting for my Amazon order to arrive. For just $2, it's pretty much as good as free. Simple, but ingenious: two pieces of synthetic leather (it's high quality, smooth, soft, and doesn't stink) stitched together, but with an added pullout ribbon that is surprisingly convenient, and works wonderfully to get the phone out. My wife was quite amused by the way it worked (as was I ). Sized perfectly for my phone, and looks pretty nice and elegant, too. Excellent basic protection sleeve, considering the price. Highly recommended, if you prefer your phone naked, but still want reasonable protection carrying it around. Five stars from me!
Next comes the Diztronic case, ordered from Amazon. It's a low-profile TPU wrap-around skin that looks and works much better than it costs. Very nice soft touch finish, clean design with precise cutouts, sharp looks and enough protection for daily use. The fit is perfect, feels like this phone was born in it. Some people on Amazon complain that it peels the screen protector at the edges due to a tight fit, but I don't use screen protectors, so I don't care. Adds very little bulk, but gives a nice protection around the bezel, so you can safely lay your phone face down. It also levels the protruding camera lens cover on the back, so it doesn't get scratched easily. One thing that seems weird at first is that the design around the volume and power buttons is very different. But then I realized how much it actually helps -- the power is recessed deeply in the cutout, making it much less prone to accidental presses, while still easily reachable with a fingertip. Very convenient. It would be nice to have a better grip on the sides (like a diamond pattern or something), but even as is, this case still makes the phone much less slippery than naked. And I didn't like the prominent logo on the back, as I prefer all my things with as little branding as possible (ideally, none, but that's just wishful thinking). Four stars (minus one for the grip and the logo).
The last one is a cheap dual-layer case pretending to be an OtterBox, also from Amazon. I saw this case there under different brands; mine was Aimo. I used OtterBox cases in the past, and to be honest, this one is quite impressive in comparison. Pretty much the same design features (except the port covers), build quality and the level of protection as Commuter series, but for just a small fraction of a price. And it has a handy folding stand on the back, which works in both portrait and landscape. If you are reeeally nitpicky, you might find the fit between the inner silicone layer and the outer hard shell a tiny bit loose along the top and bottom edges, but hey, it's not exactly an OtterBox, OK? Again, you really have to look hard and close to notice this. All the cutouts are precise, and the buttons are nice and light to the touch. Note that this case is quite bulky, and doesn't match the design style of the phone itself, so some people may not like it for its aesthetics. But as far as protection goes, this is probably the best option for this kind of money. This case is available in different colour combinations. Nothing beats black for me, but you can get yours in neon pink, if you want. Five stars, hands down!
Thanks for these suggestions and pics.
My first case for OG was Nilkins hard plastic case - at first it may look good, but actually is a piece of you know what. The rubber layer on the case started to peel off after 2 weeks first on the corners then the rest, due to this the phone looked ugly. After a while corners just broke off completely. All this happened with regular use without any extremes.
The next one I bought was a bit cheaper also from China - TPU X Type soft silicon I guess. I've been using it for many months now and it havent changed a bit. Good protection, looks nice and I guess it wont change forever unless you cut it with scissors
So yes, cheap can be good, but buyer beware as some cheap cases will be a headache.
I have this one:
aliexpress: /item/Genuine-Brand-New-IMAK-Crystal-series-PC-Ultra-thin-Hard-Skin-Case-Cover-Back-For-LG/1027800082.html
Phone looks nice in it. The plastic is sturdy, but it scratches easily. However it's a cheap one so no risk in trying it.
And the classic one gel case:
aliexpress: /item/Hot-Sale-8Colors-S-Curve-Line-Shape-High-Quality-Soft-TPU-Rubber-Wave-Gel-Soft-Skin/1310173671.html[/url]
This offers complete protection, but it's ugly.
PS: Just copy rest of URL after aliexpress.com to see it. I'm not allowed to post links.
First case I got was this: http://www.ebay.com.au/itm/QuickSan...lePhoneAccessories&hash=item3f25597db6&_uhb=1
It still works great to this day, but peeled the screen protector off.
I have had many E975 cases, flip ones, rubber and hard ones.
Currently I am using the LgOg official bumper and it is a dream, sometimes the holes are tight but I simply file them and they work fine
The bumper: http://www.ebay.com.au/itm/181246366449?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Any recommendations? All I am getting are semi-soft cases, which slipped from my shirt pocket every time I bend to pick something, No damage to the phone yet, but I am afraid, it's inevitable. I've had those soft gel cases before, on my previous phones, and it never happened
https://www.google.com/search?q=mot...oft+gel+case&tbm=shop&spd=5070256072497072998
wolfen69 said:
https://www.google.com/search?q=mot...oft+gel+case&tbm=shop&spd=5070256072497072998
Click to expand...
Click to collapse
Thanks, but the sites usually don't say whether its soft or semi-soft. I already bought 3 from 3 different vendors and they all turned to be crap.
I need users recommendations.
I know how to Google, no offence
Mokele Mbembe said:
Thanks, but the sites usually don't say whether its soft or semi-soft. I already bought 3 from 3 different vendors and they all turned to be crap.
I need users recommendations.
I know how to Google, no offence
Click to expand...
Click to collapse
The one I showed you isn't shiny, and looks real soft. Go to amazon and read user reviews.
I am about to order a Moto G and will probably order this silicon case, which has gotten decent reviews from 3 users (I just wish it was available in black). http://www.amazon.com/Eagle-Cell-Motorola-Rubber-Protector/dp/B00H2SJI1U/ref=pd_sim_cps_1
mke1973 said:
I am about to order a Moto G and will probably order this silicon case, which has gotten decent reviews from 3 users (I just wish it was available in black). http://www.amazon.com/Eagle-Cell-Motorola-Rubber-Protector/dp/B00H2SJI1U/ref=pd_sim_cps_1
Click to expand...
Click to collapse
One of the reviews says:
This is a HARD Case. This is not a Rubber Case as it says in the Title, I don't have good expectation of it.
Click to expand...
Click to collapse
wolfen69 said:
The one I showed you isn't shiny, and looks real soft. Go to amazon and read user reviews.
Click to expand...
Click to collapse
Which one? If I click the link I have tons in the search results.
Also TPU is not soft. Remove "TPU" from any search (google or ebay) and you'll find very few cases, all questionable.
There are still tons of SOFT cases for older phones like my Moto Defy
Here's one
http://www.ebay.com/itm/YELLOW-Moto...t=US_Cell_Phone_PDA_Cases&hash=item4d17d423cf
I don't see any soft silicone cases for the moto g.
Have 3 cases now All garbage, very slippery.
Not much to choose from......bummer
I have just got a first gen Moto G......cant believe by this time since its release... that only 2 soft/flexible silicone/grippy cases can be found.
It's either the Body Glove one or the super cheap chinese one that is too flappy and dosnt fit tight enough cause it it too thin. The chinese one is grippy and soft. Im not sure about the Body Glove one as far as not feeling grippy enough. It appears to be nice and flexible yet more dense material than the thin chinese one.
I wish I could find a case for this Moto G that is made with the same material Bobjear uses. I have one on my N7 and it is nice, though some will not like its over sized bumper band and overall weight. But the type of silicone Bobjgear uses is the best in the industry for grip, fit for a soft material, and density for protection.
Anyone else have any info on soft cases for the Moto G that are not slippery? The cases are all TPU types or dual silicon soft with a slippery plastic 2nd layer.....
I want one that will not allow the phone to slip off my leather car seat when I am driving for instance.
--------------------------------------------------------------------------------------------
EDIT AFTER GETTING BODYGLOVE SATIN CASE (quick review)
So I was excited to get the body glove case for a few reasons.
1. it reshapes the bottom of the phone so it lays flat
2. has cut outs for the volume and power key making it easier to find and use quickly compared to covered ones
3. may be softer than the million other TPU type cases
But now after getting it......it failed in the one area of being at all close to anything soft or silicone. It is pretty much the same TPU type material as the million others out there. Though it has that etched/molded "satin finish" lines on the back, they only provide slight help in grip as the material is slippery anyway like the other TPU cases. It is nice that the molded cut lines on the side give it some decent feel and slightly better grip than a smooth TPU case.
The cut outs:
-All the cut outs are slightly larger than the few other cases I have seen in general.
-Charge port cut out is not at all restrictive to any of the many plugs I use.
- Headphone hole is plenty big enough to work with several different sized headset plugs I have.
-Mic holes are larger than the exit holes on the phone which allow sound to travel easy into phone.
- Power and volume cut outs are also wide as well. The opening off the bottom of the keys is done so
your fingers can rest and or quickly adjust as needed. It is also easy to do in the dark or not looking at the keys.
- Speaker and the Camera cut outs are perfect and not too big or too small, very well done.
As mentioned one of the aspects I like very much with this case is that you can rest the phone on its back and it does not rock or move around when you use the touch screen.
The lip of the case over the top of the screen is not tall, maybe 1-1.5mm above the screen. It also does not hang deep into the screen off the sides which would limit any swiping ability from any side of the screen.
Over all I like the case a lot, I just wish it was closer to being a softer silicone type material for grip in the hand as well as its grip on things like car seats, my counsel above the shift lever (that fake wood laminate) that i often set it on to use GPS while driving, and any other surface it may be knocked off accidentally like tables and such.
I give this Body Glove Satin case a solid 8.5/10 personal rating. All and all its nicer to use than the super thin flimsy cheap Chinese silicone case I got for $5. That cheap silicon one is still the only one I can find that is soft silicon entirely.
Still.......if anyone knows of a softer silicone case that is not whimpy....let me know. Not looking for a $35-50 high end one though.
Got one from amazon:
Mystcase (TM) For Motorola Moto G Rubber Silicone Soft Gel Skin Case Phone Cover + Screen Protector (Purple)
It is the soft squishy kind my wife likes... too bad no one is keeping the moto G.. not unlockable since we are on cricket, and stock android without root may as well be an apple device as far as I am concerned.
Looks like exactly what I wanted. Thanks a lot.
I have this. It's slippy but it has grippy sides
http://www.ebay.co.uk/itm/WAVE-S-LI...t=LH_DefaultDomain_3&var=&hash=item1e83adf571
There have been a few threads linking to the Shenit TPU Bumper Case that have kinda died out because, well, it's no longer available on Amazon despite having been available long ago with a very future ship date. I ordered mine when the listing first went up on Amazon and it just arrived today! Here are my observations and judgments:
The Details
The case is made from two materials: TPU and a hard plastic. You can see the two materials in the photos on Amazon. It's done in a way that is still incredibly low-profile. The TPU covers all buttons, corners/edges, and ports (not the camera lens nor camera light, though). The hard plastic covers the back, the back corners, and some of the sides. The hard plastic is a *perfect fit* over the camera lens ring - from the back of the phone it is 100% impossible to tell the color of my phone.
Something that can be very clearly seen in the photos, and is the same with the official bumper, are the angles at which the sides have. This causes the feeling that the back edges of the phone "stick out". This seems to be a love-it or hate-it thing for most people. I'm torn about whether I like it or not - it definitely seems different than what I'm used to. That said, this was by no means a surprise for me and I expected it to be just like this. So in my Pro/Con list, this is what I'm talking about with the "back corners sticking out".
Oh, and it came with a piece of red velcro for some reason!
The Good
Overall, it's a very nice and snug fit on the phone yet it's not terribly difficult (also not terribly easy, in a good way) to get it off of the phone. With this case on the phone, I'm certainly not concerned with the phone slipping out whether pulling the phone out of a purse with something tugging on the case nor with skinny jean pockets or anything else. The feel of it is a mix of a TPU feel and a "soft" feel for hard plastic (think the feel of the back of the black version of the Nexus 5 to mean what I mean "soft" for hard plastic, not Quicksand case "soft"). Nobody will have problems with this slipping in and out of their pockets nor is it incredibly slippery either.
For protection, this provides the protection you would hope from a TPU case and not much more. As you can see in the photos, every corner and edge is covered by TPU including the four corners on both the front and back as well as the edges along both the front and back of the phone. The back of the phone, however is only covered with the hard plastic. Take a look at the photos and you can tell where the TPU ends on the insides of the case and where the hard plastic begins on the outsides of the case. This case might protect your phone from a drop and it might not - just like with all TPU cases. If you buy this and you play first-person shooter games where you can change your armor out, this case could be thought of as light armor or perhaps medium armor but no where near heavy armor.
It is definitely an attractive (and Nexus branded!) case that doesn't look like what many of the other $14 cases out there look like. As you can see from the photos, the case is molded perfectly to fit with the camera ring cutout. Speaking of the camera ring, the case is just a tad thicker on the back side than your camera ring so if you lay it down on the back, your camera ring is no longer a protrusion. This may have some implications for those of you with magnetic accessories for the camera ring but I can't really comment much on that. Ultimately, unless you look at the port cutouts or see my white speaker on the front, this case makes it impossible to tell the color of my phone - that's how perfect the molding is for the fit. The ONLY flaw I could find with the case's fit was for the microphone on the top of the phone. The microphone isn't perfectly centered in the hole but it's also not covered either.
The Bad
There are three primary problems I have with the case.
First of all, a quick browsing at the time I wrote this turned up quite unfruitful in actually identifying where you can even buy this case today! It is now listed as unavailable on all of the Amazon postings and even all of the eBay cases that look just like the OEM bumper case have seemed to vanish. I'm curious if you can even buy this case anymore as I couldn't find it anywhere now!
So here's the first knock on the case: The buttons have a mushy feel with terrible feedback on the power/volume buttons. We all know that cases tend to be Good, Meh, or Bad here and this case definitely qualifies as bad. Sorry!
And the last thing:The USB Port cutout, while appearing quite large, is unfortunately too small for a variety of USB cables. The first 3 USB cables I randomly grabbed didn't fit comfortable in the space provided although the fourth one did. So you'll have to find a cable that will fit in there if you ever need one and don't use Qi for all of your charging needs.
Pros:
Nexus Branded!
Plenty of color options and cheap (it was $14 shipped from Amazon)
Great snug fit with perfect molding to the phone
Feels like you hope it would feel from the photos
Very low profile - better than your typical TPU case (except for the back corners sticking out)
Plenty of room around the 3.5mm audio port.
Won't affect NFC, Qi, or radios
Cons:
Hard to buy (no longer on Amazon and the eBay lookalikes are no longer listed either)
Took a month to ship
Bad button tactile feedback
Many USB cables won't fit in the cutout for the USB port
I hope you enjoy!!
Sent from my Nexus 5 using Tapatalk
I just got mine today too. I got the blue one. Does it feel like pyramid shaped to you? Mine does. The back is thicker than the front. Buttons are not that bad. Better than some of the cheap tpus. I can still see some white bordering the camera in the back. Not too bad a case. But the shape is weird. Does the original case have that pyramid shape? If you hold it by the sides you cab definitely feel that the back is wider than the front (lip).
Sent from my Nexus 5 using Tapatalk
Just added the more thorough review and several photos. Hope you guys enjoy! Feel free to ask any questions you might have!
guapinoy said:
Does it feel like pyramid shaped to you? Mine does. The back is thicker than the front. <<snip>> But the shape is weird. Does the original case have that pyramid shape? If you hold it by the sides you cab definitely feel that the back is wider than the front (lip).
Click to expand...
Click to collapse
Yup, I commented on this in my more thorough review. It's different than I'm used to but exactly what I expected from the photos on Amazon (and Google's OEM listings/reviews as well). I still don't know if I like it or not. Like you said, it's weird.
guapinoy said:
Buttons are not that bad. Better than some of the cheap tpus. I can still see some white bordering the camera in the back. Not too bad a case.
Click to expand...
Click to collapse
If I compared this to the worst TPU case I've ever had (and I've had some bad ones) that was rated as a 1 from 1-10, then I'd give this case a 2. You're right, there is worse. But not much worse - it's pretty bad. Maybe your blue one has slightly different buttons than mine but mine is pretty bad.
For the white around my camera on the back, I can't see any white whatsoever. At least I don't think I can even as I'm trying to look for it although I guess it's possible that the white + shadow makes it blend in with my light gray case. I don't see it, though.
Even no longer available but there are some cases like this in eBay if anyone would like to give it a try: http://www.ebay.com/itm/GOOGLE-PREM...Cell_Phone_PDA_Cases&var=&hash=item3cdc425b73. But don't expect too much as this is chinese stuff. And Play Store now available for $26~ after 25% off (still got shipping fee+ tax).
Onismurai said:
Even no longer available but there are some cases like this in eBay if anyone would like to give it a try: http://www.ebay.com/itm/GOOGLE-PREM...Cell_Phone_PDA_Cases&var=&hash=item3cdc425b73. But don't expect too much as this is chinese stuff. And Play Store now available for $26~ after 25% off (still got shipping fee+ tax).
Click to expand...
Click to collapse
That looks like the same case but is definitely different packaging than what I received. Thanks for the link though, I was unable to find those on eBay when I tried yesterday.
Onismurai said:
Even no longer available but there are some cases like this in eBay if anyone would like to give it a try: http://www.ebay.com/itm/GOOGLE-PREM...Cell_Phone_PDA_Cases&var=&hash=item3cdc425b73. But don't expect too much as this is chinese stuff. And Play Store now available for $26~ after 25% off (still got shipping fee+ tax).
Click to expand...
Click to collapse
Uhh have you seen what most people have been saying about the official bumper? It's a low quality POS for the most part. Not worth full price, and even at $26 it isn't worth it with the peeling, staining, etc. Doesn't matter if it's from the play store. The unofficial ones might even hold up better, who knows, but the standard Google set with the official bumper case isn't exactly high. Besides, there's extra colors with the unofficial ones that some people might enjoy.
Anyway, if anyone still wants these ones I did find a link for super cheap. Of course it will probably take 3 weeks to a month to get to you, which is the case for most things shipping from overseas. But $12.99 shipped should make up for it. The Nexus logo is printed in a different color than the case on some of the color choices (just scroll down on the page to see).
http://www.aliexpress.com/item/For-LG-Google-Nexus-5-bumper-case-FREE-SHIPPING-front-screen-protectors/1612944308.html
God, it can't be any worse than the official bumper. I wish we had a better selection of actual bumper cases.
I'm using the Gray bumper clone for couple days. No staining (yet) , nice soft touch. Back panel is a bit bigger than front (as mentioned in 1st post).
I also have glass protector from Nillkin on, the case doesn't seem to push the glass.
Update: Now it has some blue from my jeans. sigh..
I may certainly be wrong but I'm beginning to think these unofficial cases are the same as the official ones, same manufacturing line and everything.
Sent from my XT1053 using Tapatalk