Kindle Fire get ADB working device FOUND solution for KFU - Kindle Fire Q&A, Help & Troubleshooting

Had been searching on & off over 2 months & finally found the sol
This now lets you use the KFU util and others to root & install new OS etc
You need to have installed ANDROID SDK and extras-usb & JAVA se
1)
you will need to modify the following two files:
a. adb_usb.ini – You can find it under your Users\YourUsername\.android folder
In a typical Windows 7 installation, adb_usb.ini will be located under C:\Users\YourUserNameHere\.android
Open the adb_usb.ini file with a text editor (Notepad is just fine) and add the following line at the end (on a new line). Save and exit.
0×1949
2)
android_winusb.inf – You can find it under the folder you installed the Android SDK, in my case C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver
Open the file with a text editor (notepad is again good enough), locate [Google.NTx86] section and also the [Google.NTamd64] section and add the following lines to each section, like in the screenshot.
;Kindle Fire
%SingleAdbInterface% = USB_Install, USB\VID_1949&PID_0006
%CompositeAdbInterface% = USB_Install, USB\VID_1949&PID_0006&MI_01
3)
Note: If your device list is empty, maybe you plugged-in Kindle Fire before you installed Android SDK and Android USB Drivers. In this case you’ll need to force load the Android USB driver. Right click on My Computer and select Properties then navigate to Device Manager. Under Other Devices you should see Kindle with a yellow icon containing an exclamation point.
Right Click on Kindle name and select Update Driver Software. A Dialog will pop-up asking how do you want to search for driver software. Select Browse and point toward the folder containing Google USB Driver (in my case C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver). Select Next and proceed with the installation, choose Install this driver anyway when prompted.
Ok now you can
cd C:\Program Files (x86)\Android\android-sdk\platform-tools
d. type adb kill-server followed by enter
e. type adb devices. If everything is fine, you should see a connected device (your Kindle Fire)
0000666665555 device
You are good to go
Cheers to dudes @ "reviewhorizon.com/2011/11/how-to-root-jailbreak-kindle-fire-using-one-click-solution-superoneclick-also-enable-sideloading-apps/"

Congrats... glad to hear you got things working. It's nice to see a user's first post be a success story rather than a cry for help. I'm guessing KFU's driver installer didn't work for you for some reason and you had to do it this way.
This is going to be a day late and a dollar short in your case, but you might try it this way if there's a next time around...
http://forum.xda-developers.com/showpost.php?p=23747671&postcount=2
You don't really have to install the SDK to get these drivers installed. You can get everything you need in the KFU distribution with the .inf and .ini files already edited for you. Good luck.

Device Not Found in ADB
Another way to fix the driver issue.
Uninstall driver from device manger. Select delete driver if the option is available.
Copy the driver file somewhere else on your computer
Delete the driver from the old location.
Attach the Kindle and manually install the driver from the new location.
I'm not sure why this worked for me, but after half a day of trying this worked.

This is what FINALLY worked for me
http://www.jayceooi.com/2011/12/29/how-to-install-kindle-fire-adb-usb-driver-video/

joehlmann said:
Had been searching on & off over 2 months & finally found the sol
This now lets you use the KFU util and others to root & install new OS etc
You need to have installed ANDROID SDK and extras-usb & JAVA se
1)
you will need to modify the following two files:
a. adb_usb.ini – You can find it under your Users\YourUsername\.android folder
In a typical Windows 7 installation, adb_usb.ini will be located under C:\Users\YourUserNameHere\.android
Open the adb_usb.ini file with a text editor (Notepad is just fine) and add the following line at the end (on a new line). Save and exit.
0×1949
2)
android_winusb.inf – You can find it under the folder you installed the Android SDK, in my case C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver
Open the file with a text editor (notepad is again good enough), locate [Google.NTx86] section and also the [Google.NTamd64] section and add the following lines to each section, like in the screenshot.
;Kindle Fire
%SingleAdbInterface% = USB_Install, USB\VID_1949&PID_0006
%CompositeAdbInterface% = USB_Install, USB\VID_1949&PID_0006&MI_01
3)
Note: If your device list is empty, maybe you plugged-in Kindle Fire before you installed Android SDK and Android USB Drivers. In this case you’ll need to force load the Android USB driver. Right click on My Computer and select Properties then navigate to Device Manager. Under Other Devices you should see Kindle with a yellow icon containing an exclamation point.
Right Click on Kindle name and select Update Driver Software. A Dialog will pop-up asking how do you want to search for driver software. Select Browse and point toward the folder containing Google USB Driver (in my case C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver). Select Next and proceed with the installation, choose Install this driver anyway when prompted.
Ok now you can
cd C:\Program Files (x86)\Android\android-sdk\platform-tools
d. type adb kill-server followed by enter
e. type adb devices. If everything is fine, you should see a connected device (your Kindle Fire)
0000666665555 device
You are good to go
Cheers to dudes @ "reviewhorizon.com/2011/11/how-to-root-jailbreak-kindle-fire-using-one-click-solution-superoneclick-also-enable-sideloading-apps/"
Click to expand...
Click to collapse
Mine just says Android ADB Interface

Combo of a problem
threed42 said:
Mine just says Android ADB Interface
Click to expand...
Click to collapse
I found that this started to happen to me after some ROMs I was flashing ended up getting stuck on the bootscreen. I am not sure what I did in the process, but I messed up my USB drivers. Now no matter how I configure them. I can't seem to get the device to recognize. Even though both windows devices registers the Kindle, it still won't allow me file system access. No matter which rom I try flashing.. I find that nothing seems to work.
I am trying to now restore individual segments to see if I can atleast get a boot up.. otherwise I am dead in the water.
Any help?
Oh yeah, Fastboot.. works fine.. isn't there a stock image I can just fastboot Upgrade?
John

KF not recognized in PC. Shows up as GT-P1000 instead and sdcard access.
Noob to XDA so forgive if this post is in the wrong area. I am at my wits end.
ADB: KF to PC connectivity lost after ROM install
The Good News, Bad News and Solution Attempts…
The Good News.
I installed the GedeROM CM9 ICS 4 (GedeROM ICS v4.04 CM9 Kernel v3.0.21) to my 1st generation Kindle Fire and it runs great. It is much smoother at running Air for Android with an App that I have been developing. The USB Host works great with my Logitech Wireless Keyboard and Mouse Combo with the OTG USB Dongle and Logitech nano receiver. I want to keep using this ROM as it is very functional for my needs.
The Bad News.
Now, let’s get to the frustrating part. No more drag and drop. After the install, my PC no longer recognizes the it as a Kindle Fire as a drive or sdcard. It recognizes it as a GT-P1000 (Galaxy Tab P1000). Because of this mis-reporting to the PC device manager the KF and sdcard are no longer visible as a drive on the PC for me to browse, drag and drop items.
The Device Manager sees the
---Android Phone > Android ADB Interface
or depending on the driver
---Android Phone > Android Composite ADB Interface
and no where in the Device Manager does it show the Kindle Fire any longer.
The only place the device is listed is in
---Control Panel > Hardware and Printers > GT-P1000(!). (Unknown Device)
Attempted Solutions.
1. Driver Reinsall(s) with and without SDK.
I tried reinstalling the drivers for the KF and this changed it from Android Composite ABD Interface to Android ADB Interface. (no change) I reinstalled the Composite interface and still no KF. I also tried a few different versions of drivers up and down the spectrum trying to get this installed. Including trying to install a GT-P1000 driver from Samsung. Still no luck.
2. Android Debugging
I tried to turn on and off and on etc the Android debugging in Settings > Developer Options > Android Debugging. No Luck.
3. Turn on USB Mass Storage
Unable to do this as the options are simply just not there.
4. Reboots
Countless reboots (PC and KF) and cache wipes with and without the KF attached.
5. Different ROM
I tried a different ROM for Jelly Bean 4.2 and it was successful and recognized as a KF and I could browse to the folders on the sdcard. However this ROM was so striped down that it was not really functional for me as there was no file explorer, market app, or any way to browse to the sdcard to install any app that I could drag and drop into the sdcard in the hopes of installing a file explorer and market app. The issue seems to be with the GedeROM CM9 that I am using.
Am I going to have to try multiple ROMS until something works?
Specs:
Kindle Fire (1st Gen, spring of 2012, original one purchased in December 2011, but suffered screen smash)
GedeROM ICS v4.04 CM9 Kernel v3.0.21
The PC I am using is running Windows 7 Professsional.
kinfauns said:
Congrats... glad to hear you got things working. It's nice to see a user's first post be a success story rather than a cry for help. I'm guessing KFU's driver installer didn't work for you for some reason and you had to do it this way.
This is going to be a day late and a dollar short in your case, but you might try it this way if there's a next time around...
http://forum.xda-developers.com/showpost.php?p=23747671&postcount=2
You don't really have to install the SDK to get these drivers installed. You can get everything you need in the KFU distribution with the .inf and .ini files already edited for you. Good luck.
Click to expand...
Click to collapse

Work Around Found... Sort of.
KF_Mike_KF said:
Noob to XDA so forgive if this post is in the wrong area. I am at my wits end.
ADB: KF to PC connectivity lost after ROM install
The Good News, Bad News and Solution Attempts…
The Good News.
I installed the GedeROM CM9 ICS 4 (GedeROM ICS v4.04 CM9 Kernel v3.0.21) to my 1st generation Kindle Fire and it runs great. It is much smoother at running Air for Android with an App that I have been developing. The USB Host works great with my Logitech Wireless Keyboard and Mouse Combo with the OTG USB Dongle and Logitech nano receiver. I want to keep using this ROM as it is very functional for my needs.
The Bad News.
Now, let’s get to the frustrating part. No more drag and drop. After the install, my PC no longer recognizes the it as a Kindle Fire as a drive or sdcard. It recognizes it as a GT-P1000 (Galaxy Tab P1000). Because of this mis-reporting to the PC device manager the KF and sdcard are no longer visible as a drive on the PC for me to browse, drag and drop items.
The Device Manager sees the
---Android Phone > Android ADB Interface
or depending on the driver
---Android Phone > Android Composite ADB Interface
and no where in the Device Manager does it show the Kindle Fire any longer.
The only place the device is listed is in
---Control Panel > Hardware and Printers > GT-P1000(!). (Unknown Device)
Attempted Solutions.
1. Driver Reinsall(s) with and without SDK.
I tried reinstalling the drivers for the KF and this changed it from Android Composite ABD Interface to Android ADB Interface. (no change) I reinstalled the Composite interface and still no KF. I also tried a few different versions of drivers up and down the spectrum trying to get this installed. Including trying to install a GT-P1000 driver from Samsung. Still no luck.
2. Android Debugging
I tried to turn on and off and on etc the Android debugging in Settings > Developer Options > Android Debugging. No Luck.
3. Turn on USB Mass Storage
Unable to do this as the options are simply just not there.
4. Reboots
Countless reboots (PC and KF) and cache wipes with and without the KF attached.
5. Different ROM
I tried a different ROM for Jelly Bean 4.2 and it was successful and recognized as a KF and I could browse to the folders on the sdcard. However this ROM was so striped down that it was not really functional for me as there was no file explorer, market app, or any way to browse to the sdcard to install any app that I could drag and drop into the sdcard in the hopes of installing a file explorer and market app. The issue seems to be with the GedeROM CM9 that I am using.
Am I going to have to try multiple ROMS until something works?
Specs:
Kindle Fire (1st Gen, spring of 2012, original one purchased in December 2011, but suffered screen smash)
GedeROM ICS v4.04 CM9 Kernel v3.0.21
The PC I am using is running Windows 7 Professsional.
Click to expand...
Click to collapse
I have tried several different ROMS today.
I have found that they just dont have the stability and functionality that I like with the version that I am running. SO.... that being said, I found a work around. I can keep the existing ROM in place and if I need to copy something to the SD Card, I can just boot into TWRP and mount the USB drive, make the file copies and then reboot. It's a little annoying, but none so much as not being able to do it at all.
Thanks for the input.

joehlmann said:
3)
Note: If your device list is empty, maybe you plugged-in Kindle Fire before you installed Android SDK and Android USB Drivers. In this case you’ll need to force load the Android USB driver. Right click on My Computer and select Properties then navigate to Device Manager. Under Other Devices you should see Kindle with a yellow icon containing an exclamation point.
Right Click on Kindle name and select Update Driver Software. A Dialog will pop-up asking how do you want to search for driver software. Select Browse and point toward the folder containing Google USB Driver (in my case C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver). Select Next and proceed with the installation, choose Install this driver anyway when prompted.
Ok now you can /"
Click to expand...
Click to collapse
step 3 does not work! windows was unable to install your amazon kindle fire hd!
what shall i do?

This didnt work for me
I dont know why but whenever I try to manually install the driver it pops up with an error saying something on the lines of 'The Folder does not contain a suitable software for your operating system' basically saying there is not software compatible with 32bit. I have been trying to root my kindle fire for 2 days now. I have tried to use SDK and KFU none of them worked. I will attach the errors Im getting!
Someone Help Pleasee

if all eles fails and all you want to do is copy files over try "wifi file explorer" on the playstore. very handy app to have installed just in case

Related

Device not recognized on ADB?

I don't want to bother you with stupid threads and things like that, but I've used the search function on XDA and I'm still lost on this really small problem - my Kindle Fire is not being recognized anymore in ADB.
See, a long time ago (few weeks) I rooted my KF and installed Android Market, whatever. Never installed a recovery or custom ROM. Everything was ok until I tried to install TWRP using Kindle Fire Utility.
While trying to install, I got the famous "adbd cannot run as root in production builds". So I thought it was something with my drivers. Ok, then I installed the drivers that come with KFU - just to screw with everything. My Kindle Fire stopped being recognized by ADB.
I tried: (1) uninstall the drivers and install from KFU again. (2) uninstall the drivers and install the drivers I got from the video-tutorial (the famous one). (3) factory reset the kindle fire and do all the drivers install again. (4) hold the power button 900 seconds to reset the kindle fire and install the drivers again. (5) finally install the drivers on ANOTHER computer (running WinXP instead of Win7) and plug my factory reseted KF.
I gave up.
I don't know why my Kindle Fire isn't recognized by ADB on any computer at all. I thought it was my laptop, but then I tried the same steps I did at the first time using a Windows XP and no good. I don't know.
Can someone help me? Thanks a lot.
i think xp is the better decision for such things
you can try:
power down and disconnect kf
remove any old drivers: http://support.microsoft.com/kb/315539/en-us
remove anything with adb or kindle or unknown device
replug kf without powering it on (does it by itself)
install new drivers:
-choose browse my computer for driver software
-Then select have disk
-Then select browse
-direct to where you downloaded the usb driver
-Select ok and ok
or you can try this solution:
http://forum.xda-developers.com/showthread.php?t=1430038
b63 said:
i think xp is the better decision for such things
you can try:
power down and disconnect kf
remove any old drivers: http://support.microsoft.com/kb/315539/en-us
remove anything with adb or kindle or unknown device
replug kf without powering it on (does it by itself)
install new drivers:
-choose browse my computer for driver software
-Then select have disk
-Then select browse
-direct to where you downloaded the usb driver
-Select ok and ok
Click to expand...
Click to collapse
Tried that and didn't work.
I'm going to wait a little more before using Linux, I really wanted to do this using Windows only.
in what status is your kf now ?
normally booting ? - stuck at whatever ?
at xp now ?
checked the adb_usb.ini in your .android folder (in your personal folder) ? - should include 0x1949 and if you like 0x18D1 (i included it too)
to run kfu with 6.2.2 you need the patched version:http://forum.xda-developers.com/showthread.php?t=1458841
would put it to something like c:\kfu cause it don't like spaces in pathname
try running install_drivers.bat from kfu
b63 said:
in what status is your kf now ?
normally booting ? - stuck at whatever ?
at xp now ?
checked the adb_usb.ini in your .android folder (in your personal folder) ? - should include 0x1949 and if you like 0x18D1 (i included it too)
to run kfu with 6.2.2 you need the patched version:http://forum.xda-developers.com/showthread.php?t=1458841
would put it to something like c:\kfu cause it don't like spaces in pathname
try running install_drivers.bat from kfu
Click to expand...
Click to collapse
Right now my KF is normally booting into stock ROM and stock everything.
I have both computers at my disposal: Windows XP 32-bit and Windows 7 64-bit. I'm writing in my laptop which is the Win7.
My adb_usb.ini has only 0x1949, I'll add 0x18D1 in another line (or should I use a blank space to separe them?).
Unfortunately I can't see the link you posted because XDA says I don't have privilegies to do so. My stock ROM is 6.2.2, but I think it as always been like that, and it worked using the normal way before. Can you mirror the post on your link somewhere else? I'd love to try the patched version.
Thanks for your support.
I have both computers at my disposal: Windows XP 32-bit and Windows 7 64-bit. I'm writing in my laptop which is the Win7.
Click to expand...
Click to collapse
xp will be the better choice cause you don't have to hassle with 32/64 bit drivers and the uac (user access control)
My adb_usb.ini has only 0x1949, I'll add 0x18D1 in another line (or should I use a blank space to separe them?).
Click to expand...
Click to collapse
add it in another line
Unfortunately I can't see the link you posted because XDA says I don't have privilegies to do so. My stock ROM is 6.2.2, but I think it as always been like that, and it worked using the normal way before. Can you mirror the post on your link somewhere else? I'd love to try the patched version.
Click to expand...
Click to collapse
seems that the patched version (the whole thread) is deleted - you will have to do it by yourself - take the original from the dev section and:
http://forum.xda-developers.com/showthread.php?t=1454913
The issue persists. I've seen that other people are having the same issue. The device got "unrooted" by unknown reasons and then it's invisible to any adb. As I'm writing to you right now, I'm trying the adb on my brother's Ubuntu. I've tried other solutions using linux but without success.
I'm running out of options here.
I'll admit that I haven't tested the last link you sent, but I can't see how that can change the way adb works on my device. Anyway I'll try that tomorrow.
in the meantime br3 is out - if you use kfu you will have to use an updated run.bat: http://forum.xda-developers.com/showpost.php?p=21749205&postcount=792
but you'r right - that will not change the communication
firekit http://forum.xda-developers.com/showthread.php?t=1430038
is worth a try cause linux don't use drivers to communicate
only needs some entries which are included in firekit
maybe try an other cable ?
really running out of ideas at this point ...
I got the same problem.
If you can fix it, please show me how, thank you.
c:\KindleADB>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
c:\KindleADB>
Just a quick idea. Have you tried the attach the kindle to a different USB port? I had the same issue until I used a different port. The front ports on my desktop are totally fubar, but the port where my mouse was worked when 4 out of 6 ports did not. This for me is probably a hardware problem, but it may help someone.
Sent from my Kindle Fire using Tapatalk
I am having the same exact problem as the OP and I truer everyway to root it and install the drivers but its still not recognized by adb
Its seems i should give up
Similar problem with cm9, and fixed
I was using cm7 and all was well. I installed cm9 (the cm9_02_02 ROM) which supposedly had issues with SD card mounting and adb not working. (The SD problem is a regression which is fixed thusly.)
Initially, I got the "ADB server didn't ACK" message (I had recently updated the android sdk). To fix this, cd to the tools directory and
./android update usb
./android update adb
Then the server would start but wouldn't list the KF with "adb devices" command. I realized the second command had re-written the ~/adb_usb.ini. I added "0x1949" as the last line and bingo. adb does work on cm9_02_02.
YMMV, and this is on a Mac.
Push push push it
tried all the steps. and still nothing. dont know what im doing wrong. starting to get pissed. any help would be great, thanks
Save my KF
sudogeek said:
I was using cm7 and all was well. I installed cm9 (the cm9_02_02 ROM) which supposedly had issues with SD card mounting and adb not working. (The SD problem is a regression which is fixed thusly.)
Initially, I got the "ADB server didn't ACK" message (I had recently updated the android sdk). To fix this, cd to the tools directory and
./android update usb
./android update adb
Then the server would start but wouldn't list the KF with "adb devices" command. I realized the second command had re-written the ~/adb_usb.ini. I added "0x1949" as the last line and bingo. adb does work on cm9_02_02.
YMMV, and this is on a Mac.
Click to expand...
Click to collapse
Could you help me to fix same problem with window. My PC alway, automatic recognize my KF as normal disk driver. I try to make a factory cab but not success .
Thanks.
Edit android-path.sh
1. On my Mac I opened System Profiler, then checked Hardware > USB > and 'MyDeviceName' (for me its: LePan Tablet PC)
2. Opened this file with a text editor: /Users/MyName/.android/android-path.sh
3. Added a new line in this file with the tablet Vendor Id, for example:
0x22a4
4. Executed: adb kill-server
5. Executed: adb start-server
6. Finally adb devices is showing:
List of devices attached
0163AE9D0801F02C0C280002 device
Bricked?
I think I'm having the same problem, or at least a very similar one.
Using windows XP. I got the drivers working, plugged my kindle into the Kindle Fire Utility, and ran option 2, which seemed like it was the option to create a backup in case you bricked your kindle. It ran, showed up on the Kindle screen, and did it's thing without a problem.
Then, when the kindle rebooted, I got the yellow-triangle-fire symbol. It says 'press power button for recovery', but pressing the power button does nothing. Holding it down for a long time shuts the kindle down, but pressing it again brings it right back to the yellow-triangle-fire symbol.
So I uninstalled the drivers from Windows XP (as another thread mentioned). I now have two ways that I can think of to install the drivers. Using the KFU, I get the "unsigned drivers" shutdown even after I went into the Driver Signing menu and chose "ignore and install regardless".
The other option I have is to install the drivers that I downloaded manually -- the same ones that worked in the first place. Problem with that is that I go through the entire process, selecting the directory the drivers are in and whatnot, and the only thing that happens is I get an error that says "These drivers aren't the drivers for your hardware" or something similar to that.
So neither of my options allow me to actually install drivers for my Kindle Fire, and my Fire itself is in a recovery loop. All of the tools that are supposed to address the recovery loop require drivers, so I seem to be up a creek without a Fire.
Any ideas?
Okay, to enter recovery...When you see the yellow triangle, hold the power button until it turns orange then release. It shouldn't take more than 10-15 seconds. If you still can't get into recovery, reinstall it.
For your drivers...uninstall completely and delete them if you're using Win7. Then reinstall using one of the previous methods.
The power button doesn't do anything when I push it. It stays bright green until the kindle fire shuts down. I'm not sure what "reinstall it" means, sorry, n00biness.
The drivers (winXP as mentioned) I've uninstalled, but I can't reinstall. One option says "unsigned drivers" and the other doesn't recognize the device as a Kindle and thus quits the install with a "this is not an appropriate driver for your device" message.
Thanks for trying, though! I appreciate your time and effort.

[Q] KFU Windows 8 Driver Problem

Hey, well now that my Kindle has had a charging problem for quite some time, I sent it out and got a new one for no charge. So now that I have received it, I'm trying to root it, and I notice that Kindle Fire Utility is not connecting to ADB, so I proceed to re-install the drivers. It worked fine before I updated to Windows 8 from Windows 7, but now it just plain won't install. I do have another computer I can use with Vista and have tried, and the drivers will install on, but it detects my Kindle as an Android ADB Interface, not a Kindle. I have installed the drivers multiple times. So my question is how can I get KFU working? Please respond ASAP. Thanks!
EDIT: Resolved with another computer by uninstalling driver software then reinstalling
For anyone wanting to know how to install unsigned drivers shift+ restart, then select troubleshoot, then advanced options, then startup settings, then restart. After reboot select f7 to disable driver signature enforcement it will reboot again, then simply just install the driver.
camason24 said:
Hey, well now that my Kindle has had a charging problem for quite some time, I sent it out and got a new one for no charge. So now that I have received it, I'm trying to root it, and I notice that Kindle Fire Utility is not connecting to ADB, so I proceed to re-install the drivers. It worked fine before I updated to Windows 8 from Windows 7, but now it just plain won't install. I do have another computer I can use with Vista and have tried, and the drivers will install on, but it detects my Kindle as an Android ADB Interface, not a Kindle. I have installed the drivers multiple times. So my question is how can I get KFU working? Please respond ASAP. Thanks!
EDIT: Resolved with another computer by uninstalling driver software then reinstalling
Click to expand...
Click to collapse
No comment on the win8 since I haven't had a chance even looking at it.
On the other computer, it seems the driver installed correctly except that a normally booted up KF should read Android Composite ADB Interface.
W8 and KF - ADB finally recognized it.
I finally got adb to recognize my Kindle Fire on Windows 8. Device Manager still thinks it's a Android ADB Device - but at least ADB works.
[DISCLAIMER - I'm not a windows guru, so anyone who is feel free to adjust, or comment on these instructions to make them better. This worked on my W8 computer - I won't guarentee that it will work on yours...not all W8 installations are the same!!]
Before you preform this - make sure you have the latest Google SDK installed. If you're not computer literate (meaning you can administer your own computer without help) then DON'T do this.
Here's what I did to make it work.
First you will need to set up W8 to install unsigned drivers as suggested by Thepooch in post #2 of this forum.
Windows Key + C - brings up charms
Shift + Restart from the power menu
Select Troubleshoot
Select Advanced Options
Select Startup settings
Select restart
When menu comes up after restart - select F7
W8 puts the Kindle at different addresses that W7, so you'll need to edit two files.
Plug in your Kindle to the computer. Open Device Manager under W8 (you need to be computer literate to complete this. You've been warned!)
If you're Kindle shows up as a Galaxy Nexus then uninstall the drivers. Make sure you're Kindle is identified as a Kindle in the build.prop file on the device. If not, just do a quick reinstall of the OS.zip file and that should reset it.
Plug in the Kindle to the computer - Device Manager should find it as a Kindle Fire
Now right click on the Kindle Fire (should have yellow exclamation marke), open the properties tab.
Click on the Details Tab, select Hardware ID's. The Hardware ID for the Kindle on W8 is different that W7! You need to edit two files to adjust the hardware ID's so ADB will find the Kindle.
Leave the Properties Windows Open.
Go to C:\Users\"Your user folder"\AppData\Local\Android\android-adk\extras\google\usb-driver\
Open android_winusb.inf and insert the following three lines under [Google.NTx86] and [Google.NTamd64]
;Kindle Fire
%SingleAdbInterface% = USB_Install, USB\VID_18D1&PID_D002
%CompositeAdbInterface% = USB_Install, USB\VID_18D1&PID_D002&MI_01
VERY IMPORTANT: The VID_#### and the PID_#### should MATCH what is displayed in the open Properties windows - check and make sure these numbers match!! Your Hardware ID's could be different!!
Save this file.
Go to c:\users\"Your User Name"\.android
Open adb_usb.ini with notepad.
Key in 0×18D1 (This is the same number you used in the VID_#### and PID_#### from the properties window - make sure it matches!)
Now go back to the properties window.
Select the general tab
Select update driver ....
Select Browse my computer for driver software to locate the driver software manually.
browse to C:\Users\"Your user folder"\AppData\Local\Android\android-adk\extras\google\usb-driver\ - select ok and install the driver
W8 will give you a big, nasty security prompt (only if you've enabled installation of unsigned drivers) - just hit okay.
The driver should install and you should see the Kindle as an Android ADB device now.
Testing Kindle Fire adb USB driver
Bring up command prompt (CMD).
Type adb kill-server then enter.
Type adb devices then enter.
That’s it. You should see Kindle Fire as one of the devices.
You should now be able to use ADB to manage your Kindle.
Hope this helps. Good luck.

"adb devices" cant finy my Kindle Fire 2...

I have here Kindle Fire rev. 2.
I want to root it.
I downloaded Kindle Fire ADB drivers.exe , and installet it.
Run cmd.exe goto adb Folder type "adb devices" and adb server cant finy my kindle...
My Smartphone is Visable in ADB.
i have here 3 Win 7 PC´s and Win8 Notebook (all x64 OS) . I Try´d it on other PC, dnot work. I installed extra win 7 32 bit, but still dnot work.
ADB ist 100% enable in Kindle Settings Menu.
Can anyone Help me ?
avathor said:
I have here Kindle Fire rev. 2.
I want to root it.
I downloaded Kindle Fire ADB drivers.exe , and installet it.
Run cmd.exe goto adb Folder type "adb devices" and adb server cant finy my kindle...
My Smartphone is Visable in ADB.
i have here 3 Win 7 PC´s and Win8 Notebook (all x64 OS) . I Try´d it on other PC, dnot work. I installed extra win 7 32 bit, but still dnot work.
ADB ist 100% enable in Kindle Settings Menu.
Can anyone Help me ?
Click to expand...
Click to collapse
Really needs to be in Q+A not dev.....
Try this;
Download the Android SDK and unzip it and copy the 'adt-bundle-windows' folder to your documents folder
Navigate to Documents/adt-bundle-windows/sdk/tools and run the android app - this opens the android SDK manager.
Go to tools - Manage-addon-sites and select the User defined Sites tab. Click new and add the following url
http://kindle-sdk.s3.amazonaws.com/addon.xml
Hit OK and close
Now scroll to the bottom on the SDK manager and under extras will be 2 kindle fire options 'kindle fire device definitions' and 'kindle fire USB driver' select both and install.
Now close the SDK manager.
If you have previously used your kindle on your PC, plug it in and go to device manager and un-install the drivers for it - now unplug it.
Navigate to \Documents\adt-bundle-windows\sdk\extras\amazon\kindle_fire_usb_driver and install the kindle USB drivers
Now add the location of the ADB.exe file to your path
You should now be able to plug in your kindle and execute adb devices and see your kindle - that means your good to go.
from here
bryanchapman9999 said:
Really needs to be in Q+A not dev.....
Try this;
Download the Android SDK and unzip it and copy the 'adt-bundle-windows' folder to your documents folder
Navigate to Documents/adt-bundle-windows/sdk/tools and run the android app - this opens the android SDK manager.
Go to tools - Manage-addon-sites and select the User defined Sites tab. Click new and add the following url
http://kindle-sdk.s3.amazonaws.com/addon.xml
Hit OK and close
Now scroll to the bottom on the SDK manager and under extras will be 2 kindle fire options 'kindle fire device definitions' and 'kindle fire USB driver' select both and install.
Now close the SDK manager.
If you have previously used your kindle on your PC, plug it in and go to device manager and un-install the drivers for it - now unplug it.
Navigate to \Documents\adt-bundle-windows\sdk\extras\amazon\kindle_fire_usb_driver and install the kindle USB drivers
Now add the location of the ADB.exe file to your path
You should now be able to plug in your kindle and execute adb devices and see your kindle - that means your good to go.
from here
Click to expand...
Click to collapse
I downloaded the SDK and it didn't have a 'adt bundle' in the contents but i ran sdk manager and I had already added the link you mentioned and I also had already added the extras you mentioned earlier from a article I read and Nothing so I stumbled across this article and it had a few extra steps so I thought to give it a try only problem is, When I go to my device manager to uninstall the kindle drivers i don't have that option to uninstall a 'kindle' driver rite below it there's a android adb interface and i have the option there to uninstall but before I did so I wanted to post here what's going on with me. I wonder if it worked for the person who started the post?
bryanchapman9999 said:
Really needs to be in Q+A not dev.....
Try this;
Download the Android SDK and unzip it and copy the 'adt-bundle-windows' folder to your documents folder
Navigate to Documents/adt-bundle-windows/sdk/tools and run the android app - this opens the android SDK manager.
Go to tools - Manage-addon-sites and select the User defined Sites tab. Click new and add the following url
http://kindle-sdk.s3.amazonaws.com/addon.xml
Hit OK and close
Now scroll to the bottom on the SDK manager and under extras will be 2 kindle fire options 'kindle fire device definitions' and 'kindle fire USB driver' select both and install.
Now close the SDK manager.
If you have previously used your kindle on your PC, plug it in and go to device manager and un-install the drivers for it - now unplug it.
Navigate to \Documents\adt-bundle-windows\sdk\extras\amazon\kindle_fire_usb_driver and install the kindle USB drivers
Now add the location of the ADB.exe file to your path
You should now be able to plug in your kindle and execute adb devices and see your kindle - that means your good to go.
from here
Click to expand...
Click to collapse
Worked perfectly and allowed me to root using the other guide in the forum.
Posted using my Kindle Fire 2.
Are you using the adb from the latest sdk?
I couldn't get adb to recognise my kf2 until I used the latest adb.exe
I rooted my both kindle´s before a week.
no idea why the other driver did not work.
The Driver from http://kindle-sdk.s3.amazonaws.com/addon.xml work perfectly.
I had this same issue until I updated the driver with the latest. I don't have it in front of me, but when I looked at it, it's dated approx Dec 8th 2012 in Device Manager. Update the driver to the latest and you should be good to go.
know that if you install the drivers after connect your kindle it can mess it up, if you go into device manager and uninstall the drivers after you've disconnected you're kindle and install them then reconnect it, it should work.
I think I know what's wrong...Your using windowzzzzzzzzzzzzzzzzzzzzzzzz...
powerpoint45 said:
I think I know what's wrong...Your using windowzzzzzzzzzzzzzzzzzzzzzzzz...
Click to expand...
Click to collapse
Powerpoint is so right here, If you use any linux distribution, it's going to be much easier to get your kindle connected to adb.
Do we even have a q&a or general section for this device? Bought, rooted and turned into a tablet today
Sent from my KFOT using Tapatalk 2
new adb files
cupidstunt said:
Are you using the adb from the latest sdk?
I couldn't get adb to recognise my kf2 until I used the latest adb.exe
Click to expand...
Click to collapse
That must have been my problem. I ended up moving to my Xubuntu machine to get it to work. I think my adb was from November,
Joe
rooting kindle fire 2 (10.3.1)
bryanchapman9999 said:
Really needs to be in Q+A not dev.....
Try this;
Download the Android SDK and unzip it and copy the 'adt-bundle-windows' folder to your documents folder
Navigate to Documents/adt-bundle-windows/sdk/tools and run the android app - this opens the android SDK manager.
Go to tools - Manage-addon-sites and select the User defined Sites tab. Click new and add the following url
http://kindle-sdk.s3.amazonaws.com/addon.xml
Hit OK and close
Now scroll to the bottom on the SDK manager and under extras will be 2 kindle fire options 'kindle fire device definitions' and 'kindle fire USB driver' select both and install.
Now close the SDK manager.
If you have previously used your kindle on your PC, plug it in and go to device manager and un-install the drivers for it - now unplug it.
Navigate to \Documents\adt-bundle-windows\sdk\extras\amazon\kindle_fire_usb_driver and install the kindle USB drivers
Now add the location of the ADB.exe file to your path
You should now be able to plug in your kindle and execute adb devices and see your kindle - that means your good to go.
from here
Click to expand...
Click to collapse
Thanks for the steps to install adb drivers worked prefectly
can you also kind me how to install custom recovery on kindle fire 2 (10.3.1) and cm10.1
@indus76:
You may want to look at these threads:
http://forum.xda-developers.com/showthread.php?t=2100963
for flashing the second bootloader and TWRP recovery
and
http://forum.xda-developers.com/showthread.php?t=2209995
for flashing CyanogenMod
Good luck!
This probly isnt the right place for this but I have been to so many areas and so many websites that I am crosseyed now. I managed to root my kindle the other day and was attempting to install a mod on it. At this point I cant even remember which site I was on to share the steps I took. Needless to say, I messed up and now the kindle boots to to the logo for a few seconds, shuts off and boots back to the logo, over and over. I'm not very good at all this but not completely stupid either. I'm simply ready to pull my hair out. I have installed Android SDK and am having trouble getting the correct drivers for my kindle apparently. Its a kindle fire hd 2012. I went through all the trouble of installing the sdk and got to the part with the addons and manually putting in the amazon site, only to read on and discover its no longer supported so I can not get the different kindle fire definitions. In my device manager, it shows kindle fire and expanded shows Android ADB Interface (no composite.. does it matter?). I have verified that abd is installed and working, but doing a devices command, doesnt show any devices. It executes without errors, just doesnt list anything. I have a fastboot cable and it does currently say Fastboot on the kindle when I plug it in.. thats all it says tho, is it supposed to go any further then those words?
I have tried so many suggestions on here to get it to see my kindle to no avail. I follow tutorials, that seem to link to other tutorials because the previous ones had prerequisites and THOSE have links for downloads that no longer work and so I do a side load of a webpage trying to find the missing download I need and THOSE pages end up leading me somewhere else or going a different route then the previous tutorial took me and I just CAN'T get anywhere with this! It shouldnt be this hard (and I'm venting at this point so I apologize). Does anyone have an UPDATED (2018) tutorial for getting my kindle back to where it will boot up... assuming my computer will ever see it (windows 7 btw). Thanks in advance.

[Q] KF to PC connectivity lost after ROM install (Recognized as different device)

********Work Around Found**********
********See Below This Post*********
Noob to XDA so forgive if this post is in the wrong area. I am at my wits end.
I have screen shots but cannot get them to attach.
Kindle Fire to PC connectivity lost after ROM install (Recognized as different device GT-P1000) and I cannot install drivers to this device
The Good News, Bad News and Solution Attempts…
The Good News.
I installed the GedeROM CM9 ICS 4 (GedeROM ICS v4.04 CM9 Kernel v3.0.21) to my 1st generation Kindle Fire and it runs great. It is much smoother at running Air for Android with an App that I have been developing. The USB Host works great with my Logitech Wireless Keyboard and Mouse Combo with the OTG USB Dongle and Logitech nano receiver. I would like to keep using this ROM as it is very functional for my needs.
The Bad News.
Now, let’s get to the frustrating part. No more drag and drop. After the install, my PC no longer recognizes the it as a Kindle Fire as a drive or sdcard. It recognizes it as a GT-P1000 (Galaxy Tab P1000). Because of this mis-reporting to the PC device manager the KF and sdcard are no longer visible as a drive on the PC for me to browse, drag and drop items.
The Device Manager sees the
---Android Phone > Android ADB Interface
or depending on the driver
---Android Phone > Android Composite ADB Interface
and no where in the Device Manager does it show the Kindle Fire any longer.
The only place the device is listed is in
---Control Panel > Hardware > Devices and Printers > GT-P1000(!). (Unknown Device) And I cannot install drivers on this device.
Attempted Solutions.
1. Driver Reinstall(s) with and without SDK.
I tried reinstalling the drivers for the KF and this changed it from Android Composite ABD Interface to Android ADB Interface. (no luck) I reinstalled the Composite interface and still no KF. I also tried a few different versions of drivers up and down the spectrum trying to get this installed. Including trying to install a GT-P1000 driver from Samsung. Still no luck.
2. Android Debugging
I tried to turn on and off and on etc the Android debugging in Settings > Developer Options > Android Debugging. No Luck.
3. Turn on USB Mass Storage
Unable to do this as the options are simply just not there.
4. Reboots
Countless reboots (PC and KF) and cache wipes with and without the KF attached.
5. Different ROM
I tried a different ROM for Jelly Bean 4.2 and it was successful and recognized as a KF and I could browse to the folders on the sdcard. However this ROM was so striped down that it was not really functional for me as there was no file explorer, market app, or any way to browse to the sdcard to install any app that I could drag and drop into the sdcard in the hopes of installing a file explorer and market app. The issue seems to be with the GedeROM CM9 that I am using.
Am I going to have to try multiple ROMS until something works?
Specs:
Kindle Fire (1st Gen, spring of 2012, original one purchased in December 2011, but suffered screen smash)
GedeROM ICS v4.04 CM9 Kernel v3.0.21
The PC I am using is running Windows 7 Professsional.
Work Around Found... Sort of.
I have tried several different ROMS today.
I have found that they just dont have the stability and functionality that I like with the version that I am running. SO.... that being said, I found a work around. I can keep the existing ROM in place and if I need to copy something to the SD Card, I can just boot into TWRP and mount the USB drive, make the file copies and then reboot. It's a little annoying, but none so much as not being able to do it at all.
Thanks for the input.
KF_Mike_KF said:
Noob to XDA so forgive if this post is in the wrong area. I am at my wits end.
I have screen shots but cannot get them to attach.
Kindle Fire to PC connectivity lost after ROM install (Recognized as different device GT-P1000) and I cannot install drivers to this device
The Good News, Bad News and Solution Attempts…
The Good News.
I installed the GedeROM CM9 ICS 4 (GedeROM ICS v4.04 CM9 Kernel v3.0.21) to my 1st generation Kindle Fire and it runs great. It is much smoother at running Air for Android with an App that I have been developing. The USB Host works great with my Logitech Wireless Keyboard and Mouse Combo with the OTG USB Dongle and Logitech nano receiver. I would like to keep using this ROM as it is very functional for my needs.
The Bad News.
Now, let’s get to the frustrating part. No more drag and drop. After the install, my PC no longer recognizes the it as a Kindle Fire as a drive or sdcard. It recognizes it as a GT-P1000 (Galaxy Tab P1000). Because of this mis-reporting to the PC device manager the KF and sdcard are no longer visible as a drive on the PC for me to browse, drag and drop items.
The Device Manager sees the
---Android Phone > Android ADB Interface
or depending on the driver
---Android Phone > Android Composite ADB Interface
and no where in the Device Manager does it show the Kindle Fire any longer.
The only place the device is listed is in
---Control Panel > Hardware > Devices and Printers > GT-P1000(!). (Unknown Device) And I cannot install drivers on this device.
Attempted Solutions.
1. Driver Reinstall(s) with and without SDK.
I tried reinstalling the drivers for the KF and this changed it from Android Composite ABD Interface to Android ADB Interface. (no luck) I reinstalled the Composite interface and still no KF. I also tried a few different versions of drivers up and down the spectrum trying to get this installed. Including trying to install a GT-P1000 driver from Samsung. Still no luck.
2. Android Debugging
I tried to turn on and off and on etc the Android debugging in Settings > Developer Options > Android Debugging. No Luck.
3. Turn on USB Mass Storage
Unable to do this as the options are simply just not there.
4. Reboots
Countless reboots (PC and KF) and cache wipes with and without the KF attached.
5. Different ROM
I tried a different ROM for Jelly Bean 4.2 and it was successful and recognized as a KF and I could browse to the folders on the sdcard. However this ROM was so striped down that it was not really functional for me as there was no file explorer, market app, or any way to browse to the sdcard to install any app that I could drag and drop into the sdcard in the hopes of installing a file explorer and market app. The issue seems to be with the GedeROM CM9 that I am using.
Am I going to have to try multiple ROMS until something works?
Specs:
Kindle Fire (1st Gen, spring of 2012, original one purchased in December 2011, but suffered screen smash)
GedeROM ICS v4.04 CM9 Kernel v3.0.21
The PC I am using is running Windows 7 Professsional.
Click to expand...
Click to collapse

[Q] KF1 64-bit drivers will NOT work

Hello
I am really struggling with trying to get the KF drivers installed on ANY Windows 7 x64 computer.
I have access to a Windows 7 32-bit computer at work. The drivers from the KFU installed absolutely fine on that without issue, first time.
But at home, I only have Windows 7 or Windows 8 64-bit computers. I have tried searching XDA up and down, edited inf files, tried to manually install drivers, even wasted an hour installing JDK / SDK as suggested on some forums.
Nothing works.
If anyone has come up against this and solved it, I'm all ears.
TIA
Loobster said:
Hello
I am really struggling with trying to get the KF drivers installed on ANY Windows 7 x64 computer.
I have access to a Windows 7 32-bit computer at work. The drivers from the KFU installed absolutely fine on that without issue, first time.
But at home, I only have Windows 7 or Windows 8 64-bit computers. I have tried searching XDA up and down, edited inf files, tried to manually install drivers, even wasted an hour installing JDK / SDK as suggested on some forums.
Nothing works.
If anyone has come up against this and solved it, I'm all ears.
TIA
Click to expand...
Click to collapse
I couldn't help you much on the Windows side of things, but have you looked into creating a Linux LiveUSB and running SoupKit to get ADB and fastboot working?
Loobster said:
Hello
I am really struggling with trying to get the KF drivers installed on ANY Windows 7 x64 computer.
I have access to a Windows 7 32-bit computer at work. The drivers from the KFU installed absolutely fine on that without issue, first time.
But at home, I only have Windows 7 or Windows 8 64-bit computers. I have tried searching XDA up and down, edited inf files, tried to manually install drivers, even wasted an hour installing JDK / SDK as suggested on some forums.
Nothing works.
If anyone has come up against this and solved it, I'm all ears.
TIA
Click to expand...
Click to collapse
This is due to driver signature enforcement on x86-64 versions of Windows 7 & 8.
The way around this is to disable that feature.
This is what you'll need to enter into an administrator cmd session:
bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit.exe -set TESTSIGNING ON
Note, that does come with some security risks of course since unsigned drivers can then be installed, but in all honesty if you have your system secured properly otherwise it's not much of an issue.
That will allow the drivers to be installed. Note this is just for Windows 7. Windows 8 is an entirely different beast in how to handle this scenario.
Edit - No that's not a typo in the lines above about the DDISABLE part. It's meant to have both D's there.
Morpheus Phreak said:
This is due to driver signature enforcement on x86-64 versions of Windows 7 & 8.
The way around this is to disable that feature.
This is what you'll need to enter into an administrator cmd session:
bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit.exe -set TESTSIGNING ON
Note, that does come with some security risks of course since unsigned drivers can then be installed, but in all honesty if you have your system secured properly otherwise it's not much of an issue.
That will allow the drivers to be installed. Note this is just for Windows 7. Windows 8 is an entirely different beast in how to handle this scenario.
Edit - No that's not a typo in the lines above about the DDISABLE part. It's meant to have both D's there.
Click to expand...
Click to collapse
Thanks Morpheus. I'll try that later. And I am wanting to use my Windows 7 laptop.
I'll feed back if it works or not.
No dice.
I don't think it's that the driver isn't signed, it just says no driver found for the Kindle Fire when I connect it up.
It searches WU and doesn't find anything. Then if I manually try and update the device in device mangler, it tells me there is no driver in the drivers folder in the KFU folder.
I have an image of the drive before I ever connected the KF, and before I installed the KFU.
I wonder if I ghosted back to that image, then turned off unsigned driver blocking, then installed KFU, if it would work.
Loobster said:
I have an image of the drive before I ever connected the KF, and before I installed the KFU.
I wonder if I ghosted back to that image, then turned off unsigned driver blocking, then installed KFU, if it would work.
Click to expand...
Click to collapse
Go ahead and roll it back. Then...
In the install_drivers.bat that comes with KFU (right click, select edit), there is a line that says:
Code:
start .\drivers\dpinst64.exe
Change it to say:
Code:
start .\drivers\dpinst64.exe /lm
(obviously for a 32 bit system you would change the "dpinst32" line)
Save the file and run it with the Kindle Fire unplugged.
Next, open a command window and enter the following (you may have to run the command window as admin):
Code:
mkdir .android
Open your user directory and confirm there is a folder named ".android", then copy the "adb_usb.ini" from the Kindle Fire Utility folder into that ".android" folder. Plug your Kindle in, select "disconnect" and you should be able to send adb commands or use the KFU with no problem.
Nope.
I don't get a 'disconnect' option (I take it I should be seeing that on the Kindle Screen?).
I realize though that I omitted some information (sorry) that may make a difference. The KF I am using to connect at home is one that has already been rooted and has the bootloader and Jellybean installed. I guess I might get the 'disconnect' option if I still had the stock Kindle ROM installed.
I don't know why that would make a difference as to why the driver won't install though. I just get the same thing ..... Windows searches WU, doesn't find a driver, and reports driver not installed on the second Kindle item.
I have one item which is installed properly and called 'Amazon Kindle Fire' and is under 'Portable Devices' in Device Mangler. The one that has no driver is under 'Other Devices' and is also called 'Amazon Kindle Fire'. From what I remember of the installation on 32-bit Windows, it seems that this is the version that relates to ADB.
I am about ready to give up on this nonsense and load up a spare HDD with Windows 7 32-bit just for when I want to root these devices and do general tasks with them. I could just swap the HDD in when I need to. A pain, but I'm losing the will to live with this ridiculous driver issue.
Thanks for your help guys.
Ok, so maybe it's not Windows 7 x64.
I installed 7 x86 on a spare disk in the laptop, and it does EXACTLY the same thing, and I cannot use the KFU.
I have no idea what is different about my work Windows 7 32-bit laptop, but apparently it's the only computer I can get the drivers to install to, and get KFU to work on. I've tried four Windows 7 x64 builds and two Windows 7 x86 builds. Only my laptop at work, works.
<sigh>
Loobster said:
I realize though that I omitted some information (sorry) that may make a difference. The KF I am using to connect at home is one that has already been rooted and has the bootloader and Jellybean installed.
Click to expand...
Click to collapse
Yes, it would've been helpful to know this ahead of time.
Do you know what ROM is installed? Look under "About Tablet" in the Cyanogenmod or AOSP Version.
It's Hashcode's release, of 4.2.2.
Kernel Version
3.0.50+
[email protected] #5
Tue Feb 12 23:04:41 PST 2013
Build Number
full_otter-userdebug 4.2.2 JDQ39 eng.hashcode.20130212.152604 test-keys
Loobster said:
It's Hashcode's release, of 4.2.2.
Kernel Version
3.0.50+
[email protected] #5
Tue Feb 12 23:04:41 PST 2013
Build Number
full_otter-userdebug 4.2.2 JDQ39 eng.hashcode.20130212.152604 test-keys
Click to expand...
Click to collapse
Different ROMs and different recovery builds can have different hardware IDs. When you plug your device into USB, you need to go to the device manager and check the hardware ID of that particular build by right-clicking on the device and selecting properties. Under the details tab, there is a drop down menu...select "Hardware Ids". You should see something similar to the following:
Code:
USB\Vid_1949&Pid_0007&Rev_0216&MI_01
USB\Vid_1949&Pid_0007&MI_01
In the KFU drivers folder, there will be a file called "android_winusb.inf" that needs to be edited to accommodate the hardware ID listed for your particular build. Since you are on a 64bit system, you need to add to the Kindle section under "[Google.NTamd64]". For the above example, you would add the following to the "android_winusb.inf", and save it.
Code:
%CompositeAdbInterface% = USB_Install, USB\VID_1949&PID_0007&REV_0216&MI_01
%SingleAdbInterface% = USB_Install, USB\VID_1949&PID_0007&MI_01
Your hardware ID may be different so pay attention to what you are doing. Then go back to the device properties, select the driver tab and update your drivers. From here you should be able to manually install the "android_winusb.inf" by selecting "choose what drivers to install", "Have disk", or however it's laid out on Win7. You may need to do the same for any new ROM you install and you may need to do it for custom recovery also.
I see.
So when a KF is flashed with a different ROM, it presents to the PC as a different hardware string in device mangler, even though it's the same physical device.
That makes sense now since I've rooted two different KFs on the work laptop without any issue, using the same [or very similar] ROM.
I guess that also means that if I attached a KF with a stock Amazon ROM installed, it may well just work fine. I don't know if it's possible to roll back to the stock Amazon ROM. I did take a backup with TWRP before installing the custom ROM.
I will editing the files with the new hardware IDs on the laptop at home and see what happens.
Thanks!
Loobster said:
I see.
So when a KF is flashed with a different ROM, it presents to the PC as a different hardware string in device mangler, even though it's the same physical device.
That makes sense now since I've rooted two different KFs on the work laptop without any issue, using the same [or very similar] ROM.
I guess that also means that if I attached a KF with a stock Amazon ROM installed, it may well just work fine. I don't know if it's possible to roll back to the stock Amazon ROM. I did take a backup with TWRP before installing the custom ROM.
I will editing the files with the new hardware IDs on the laptop at home and see what happens.
Thanks!
Click to expand...
Click to collapse
Just keep your android_winusb.inf and append new hardware IDs every time you switch to a different ROM or device, then manually install it again.
It worked! Thanks a lot Soupmagnet. KFU sees the KF as online and all is well.
I learned something about driver installation and hardware IDs also.
Hopefully this thread will help others coming up against the same issue.
Had a scare tonight, my KF would not turn on! I thought it had failed right at the point when I had an answer. I did the holding down the power button for 30 seconds things, and it powered on with the next press of the power button.
Thanks again all who contributed to the thread.
I had the same trouble
But here is how I got it working- http://www.jayceooi.com/2011/12/13/how-to-install-kindle-fire-adb-usb-driver/

Categories

Resources