Develop Bugs

[MOD][i9082]How to Enable and Disable On-screen/soft Buttons Enable on-screen buttons

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to Enable and Disable On-screen/soft ButtonsEnable on-screen buttons:]
You will need root access for this.
Please take complete backup before proceeding, in case if you do something wrong..
If your phone isn’t rooted, you can use this method to root the phone.
You will need root access for this. If your phone isn’t rooted, you can use this method to root the phone.
Install ES File Explorer File Manager on your phone from the Play Store. This is a file manager that will be used to edit those system files to enable/disable on-screen/soft buttons. Those already experienced with using a root-enabled file manager can go directly to 4.
Open ES Explorer. Then, click the menu button on your device and click Settings. Here, tick the “Up to Root” option. Then go down and tick the “Root Explorer” option, then press Allow/Grant button when prompted to grant it root access. Then, tick the “Mount File System Option” as well. Once all three options are selected, press back to exit the settings.
Hit the Up on top in ES Explorer till you reach the outermost folder (till it says / at the top).
Go into the system folder, then scroll down to find the build.prop file. Tap on this file to start editing it. If you get an “Open With” prompt, select “ES Note Editor”.
Now, at the end of the file (at the bottom after the last line), add the line “qemu.hw.mainkeys=0″ (without the ” quotes), then save the file (press the Menu button to see the Save option).
Then, reboot the phone. After the phone boots up, you should have the virtual on-screen buttons on your phone
Disable Soft Menu and Back keys:
In ES Explorer, now scroll to the system » usr » keylayout folder, then tap on the Generic.kl file. Select to open the file as “Text” in the first popup, then select “ES Note Editor” to open the file.
Now, find the line that says “key 139 menu”, then add a # in front of the text, so that it becomes “#key 139 menu”.
Similarly, add a # before the line that says “key 158 back”.
Then, save the file.
Reboot the phone, after which the capacitive menu and back keys should be disabled
For Nexus 4 Keyboard, Camera, Clock, Audio and Wallpapers for Grand Duos
http://forum.xda-developers.com/showthread.php?p=40766062#post40766062

Waste of screen space, that's what the keys under the screen are for...

By mistake pressed thanks instead of reply... lol..
Yeah waste of screen but by changing DPI that is compensated and as far as I can see the home button provided by Samsung is too cheap quality.
Who knows we might need it.

DBZo07 said:
By mistake pressed thanks instead of reply... lol..
Yeah waste of screen but by changing DPI that is compensated and as far as I can see the home button provided by Samsung is too cheap quality.
Who knows we might need it.
Click to expand...
Click to collapse
What dpi you suggest?
Sent from my GT-I9082 using Xparent Skyblue Tapatalk 2

drshafi said:
What dpi you suggest?
Sent from my GT-I9082 using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
DPI 200
Use this for over coming bugs of DPI http://forum.xda-developers.com/showthread.php?t=2072081
Set DPI 240 (resolution 480x840) for apps which cause problems viz, contact, dialer, calculater, internet browser..
And for playstore fix use this GooglePlay Installer 1.1.0 by ChelpuS

Hey bro im using stock rooted bmk3 rom and I edit build.prop but after reboot system ui force closes. Help me bro to enable soft keys because my back key not working.

Unable to enable soft keys
torque7 said:
Hey bro im using stock rooted bmk3 rom and I edit build.prop but after reboot system ui force closes. Help me bro to enable soft keys because my back key not working.
Click to expand...
Click to collapse
I think it's not possible in 4.2.2 build. It was possible in 4.1.2 and possible in 4.4.x onwards.

Is there any hope?
Sent from my GT-I9082 using XDA Free mobile app

Didn't work on mine. Stock ROM 4.2.2. System UI FC.

i have a problem with adding the home button to my i9082
when i add the line qemu.hw.mainkeys=0 to build.prop then i save the file ..when i restart my phone the home button is not enable and the phone have a problem by showing on the screen ( unfortunately, system UI has stopped ) plzz help

It doesn't work. Remove that line.. & Restart the phone.

Doesn't works with 4.2+ :

ahmad baroudi said:
when i add the line qemu.hw.mainkeys=0 to build.prop then i save the file ..when i restart my phone the home button is not enable and the phone have a problem by showing on the screen ( unfortunately, system UI has stopped ) plzz help
Click to expand...
Click to collapse
Anyone can solve it for v4.2.2
Send By Samsung Galaxy Grand Dous(GT-I9082)

disable method not works.....
i appreciate your struggle.....but disabling method of soft keys not works.... disabling is done simply removing the line which we have added in build.prop folder....so kindly check it and correct it in description......:good:

Does it work for custom ROM, like cyanogenmod?
Sent from my GT-I9082 using Tapatalk

It worked (cyanogenmod13)
Sent from my GT-I9082 using Tapatalk

[ROM][Updated] Unicom Modified B506 V1.1 by KangVIP (SystemUI FC Patch)

NOTE: This post was translated from Chinese to English, using Google Translate, and I (miz_pimp) am NOT the rom developer, so I can't fix any bugs
This version is based on the B506 production Unicom modified version (V1.1 version), and make appropriate streamlined.
New features using inline code mode, with the original Emui perfect blend of style.
Favorite local friends like him to support, thank you!​
NOTE: The SystemUI FC error has been fixed by KangVIP, and has made a patch to fix the issue. A huge thank you to him! :good:
Welcome to reprint, but please respect the original author's work results and indicate the source, thank you!
Modification and beautification as follows:
1, open the ART mode option (option inside the developer)
is first turned on again when the opportunity ART mode is slower, some software may not be compatible ART mode.
ART mode is turned on, fluency has improved. ​2, the navigation bar to join the lock screen button (click on the lock screen, long press the power menu pops up), you can customize the display.
3, the right to return home switching function keys (right hand when it seems more convenient).
4, the battery icon set, with the following options:
default
does not show the percentage.
displays only a percentage.
hidden percentages and icons.
circular battery icon​
5, the status bar displays real-time network traffic ( upload, download separately and simultaneously display three kinds of display modes )
6, press the return key (one second) end of the current program.
8, the power menu option added to reboot to restart Recovery / Fastboot mode.
9, the navigation bar height of their choice (24/36 / and completely hidden by default), when the minimum height of the horizontal screen 36dpi (the button is displayed in order to avoid failure), modified with immediate effect. Reference fte9k code, thank F major.
10, pull down the notification bar Lunar display
11, the pull-down notification bar:
Click to enter the alarm time is set, press to enter the date setting
Click on a date to enter the calendar, press to enter the date setting. ​
12, time position to join the notification bar invisible power button, you can customize whether to use.
13, the new volume key wake-up option
14, the pull-down screen shortcut buttons added assistant and a flashlight (the follow-up will continue to add some useful buttons)
15, the power to customize menus and add a flashlight and screenshots option
16, re-edit the full-screen assistant:
Long press the Home key to pop up the volume adjustment option
long press the return key to end the current program
long press to open the Quick Settings menu task
lock screen / menu key mergers, click the button to lock screen function, press the Menu key functions​
17, joined APP window operation mode, you can also start multiple app windows, and you can move the zoom window size and position.
(Mainly transplanted from mokee, part reference fte9k code, thank F major)
after starting in windowed mode, the program will appear in the bottom three buttons:
Press and hold the button to the left of the zoom window size
and hold the middle button to move the window Location
clicking the rightmost button to close the current window​
The split-screen multitasking is currently still a WIP (work in progress) Some app are not supported, will continue to follow up ... to see the specific effects of the drawings:
... Above: continuous click The build number can open the "Developer Options"
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Open the ART mode:
The main new features in the "System Settings" inside:
In the task bar window mode press need to start a program, and click the Start window mode:
Program will be open window mode, and the emergence of three buttons at the bottom:
holding down the leftmost button to zoom the window size
and hold the middle button to move the position of the window
click the right button to close the current window
Multiple program windows:
DOWNLOAD LINK
PATCH
BRUSH METHOD:
Brush machine:
1 computer installed Huawei Device USB driver (can not install pea pods or other phone installation assistant)
2 cell phone turned USB debugging mode: Settings> Developer Options> USB Debugging> check
3 would connect the phone to a computer via a USB cable
4. pea pods installed on the computer or computer program closes housekeeper like , so lead to normal brush.
BRUSH: Download and unzip the attachment, and then perform Flash_All.bat, and follow the instructions carefully operation (described in detail in the run Flash_All.bat can see)!
APPLYING PATCH:
Download the attachment and unzip it, then after installing the rom, enable USB debugging on device, then run patch.bat file.[/SIZE]
If you run the script after release have not been able to enter bootloader mode, you can restart the phone, and hold the volume down key until you restart and see the screen. Then the phone's state Brush mode, run the script again to successfully brush into the brush .
If this is the first brush B506 recommend brushing into Recovery double wipe.
-------------------------------------------------- -------------------------------------------------- ---------------------------------
As the first edition of the EMUI 2.0 in ROM , it is inevitable there will be mistakes. Thanks to support local Friends ROM like this, there is a feedback thread or private bug please believe me, I will try to fix.
SOURCE

Is it multi language or just Chinese and English?
Gesendet von meinem P6-U06

thank you , its a perfect rom. Download Mirror link PLZ, i cant downlaod it

taaeem said:
Is it multi language or just Chinese and English?
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
I'm not sure, will install it, then let you know.
M0JTABA said:
thank you , its a perfect rom. Download Mirror link PLZ, i cant downlaod it
Click to expand...
Click to collapse
I'm also still downloading it.
EDIT: UGH!!! The download failed at 98%!!!! :crying:

hmm.. someone upload english screen shots

Mirror link By Me :
[email protected]
Regards,

miz_pimp said:
I'm not sure, will install it, then let you know.
I'm also still downloading it.
EDIT: UGH!!! The download failed at 98%!!!! :crying:
Click to expand...
Click to collapse
At 98% ! WTF ? [emoji33] Bad lucky.

neodante said:
At 98% ! WTF ? [emoji33] Bad lucky.
Click to expand...
Click to collapse
Second time is 100%, with an authentication failed!! [emoji36]
Thank you for the mirror, @mojtaba [emoji4][emoji106]
Sent from my Huawei P6

Ok, guys, this rom is unfortunately really unstable! I guess I was just too excited about the extra features! [emoji15][emoji5]
I keep getting "SystemUI has stopped" when I try to pull down the notification bar, and it sometimes won't stop popping up for a while. And the navigation bar icons also weren't centered when the lock icon was removed, nor the hide icon.
Also, I wasn't able to change themes, because I got the SystemUI error again. I'm flashing the stock B506 again, and I just realised that I lost all my screenshots that I took when I flashed the stock rom with the 3 button method! [emoji85]
Hopefully this rom will at least give our devs an idea of what modding is possible with EMUI, even when it seems impossible to decompile the apks. There has to be a workaround if the Chinese devs can do it, right?
Sent from my GT-N8000 using Tapatalk

It have prb with english lang UI & it work without any prb in china lang UI.
Version 1.1 released with ART .

miz_pimp said:
Ok, guys, this rom is unfortunately really unstable! I guess I was just too excited about the extra features! [emoji15][emoji5]
I keep getting "SystemUI has stopped" when I try to pull down the notification bar, and it sometimes won't stop popping up for a while. And the navigation bar icons also weren't centered when the lock icon was removed, nor the hide icon.
Also, I wasn't able to change themes, because I got the SystemUI error again. I'm flashing the stock B506 again, and I just realised that I lost all my screenshots that I took when I flashed the stock rom with the 3 button method! [emoji85]
Hopefully this rom will at least give our devs an idea of what modding is possible with EMUI, even when it seems impossible to decompile the apks. There has to be a workaround if the Chinese devs can do it, right?
Sent from my GT-N8000 using Tapatalk
Click to expand...
Click to collapse
Thanks for posting this. How do you flash it? Stock recovery?
Edit
Oh, never mind thanks. ADB method,

Sounds great but unfortunately unusable. System UI crashing just goes in endless loop.

Version 1.1 available now...downloading, hope it works
http://pan.baidu.com/s/1eQIIDVW

Guys, the rom has been updated, with a patch for the SystemUI FC from @kangvip. :good: The updated link for the rom and the patch is in the OP. :victory:
I'll also update with English screenshots as soon as I've downloaded and installed the rom.

Update'
miz_pimp said:
Guys, the rom has been updated, with a patch for the SystemUI FC from @kangvip. :good: The updated link for the rom and the patch is in the OP. :victory:
I'll also update with English screenshots as soon as I've downloaded and installed the rom.
Click to expand...
Click to collapse
so now the ROM works smooth without any problems?

primo14z said:
so now the ROM works smooth without any problems?
Click to expand...
Click to collapse
It should, but I'm still waiting for the download to finish, so I'll report back when I've installed it. [emoji106]
Sent from my Huawei P6

miz_pimp said:
It should, but I'm still waiting for the download to finish, so I'll report back when I've installed it. [emoji106]
Sent from my Huawei P6
Click to expand...
Click to collapse
I Want to Check This ROM. What Kang Have Implement. Can You Mirror The Link Please If You Can.

Yes Its Works perfectly

husen4u said:
I Want to Check This ROM. What Kang Have Implement. Can You Mirror The Link Please If You Can.
Click to expand...
Click to collapse
Unfortunately my connection is too slow; it will take about 4 hours for me to upload the rom, if not longer.
If anyone is able to mirror the update, it will be much appreciated. :good:

Mirror for 1.1 version
Dropbox:https://www.dropbox.com/s/6cwsl0o3y7yezaq/P6-B506U-V1.1.rar

【HRT_ycjeson】MATE-U06，|EMUI3.0|2014/11/23

ported emui3.0 from p6 unicom based on android 4.4.2 for mate 1
original post :http://cn.club.vmall.com/forum.php?mod=viewthread&tid=1745404&extra=page%3D1%26filter%3Dtypeid%26typeid%3D236%26typeid%3D236
rom download link :pan.baidu.com/s/1i3Gbuip
kernel download link:pan.baidu.com/s/1bnlf1FL
kernel is for obtaining root access as it mentioned in original post.
notice that this rom is for unicom mt1-u06 and its chines and English support .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
google translate:
ROM Name: EMUI 3.0 transplant first edition
ROM size: 512M
Adapter Version: MATE-U06
Test models: MATE-U06 _2G version
About the Author: HRT team _ycjeson
Support Forum: Pollen Club ( http://cn.club.vmall.com )
Release date: 2014/11/23
Transplant Huawei P6 11.19 EM released UI 3.0 firmware using XDA's gold-concert Great God 4.4 kernel, to express my heartfelt thanks! [Update log] 1. To improve the quality jpg 100% 2. Dial-up time is reduced to reflect the increase scrolling 3. Touch 4. To improve the overall response optimization 5. Battery 6. fix some application problems 7. Stagefright allow faster video and music 8. Rendering GPU 's UI 9. streamlined system applications, improve fluency 10. 5.0 using transition effects, making the system more smooth appearance (it is recommended to set up - Developer Options - window animations, excessive animation, duration is set to 0.5 the better) 11. on the basis of stability, a lot of useless system files to streamline streamline cust 12. 13. streamline lib library files useless shield 14. Update host ad code, shielding a lot of advertising
15. Join Sony video engine
16. TS optimization enabled by default
JIT acceleration 17. Open
18. modified 240 DPI, enjoy great vision
19. I did not experience a bit fever phenomenon, playing games do not know
20. Due to the revised DPI desktop ugly, so join millet desktop
21. modify models for mate
22. kernel root comes [Application] 1. Pollen club 2.re Manager 3. shutdown restart [bug] known as non-modified DPI 320 system will be applied after the dislocation, temporarily can not be repaired, the proposed set the system / bulid in the last line of 241 to 320 restart. Occasionally sex splash screen, not the probability [Note]
1. This package is suitable for Huawei MT1-U06 Unicom version, do not brush into other models
2. Brush the recommendation of a double clear
3. Brush after the proposal on "Developer Options" in the "Disable HW overlay" will greatly enhance fluency, but this function will fail to restart, you need to re-open.
[Brush tutorial]
1. Do not extract the ROM package will be downloaded directly on the external SD card
2. After the success of the third-party recovery brush off, hold down the power + volume + on the volume does not let go until you get to the third-party recovery
3. Choose to recovery wipe-format data input yes click Go
4. Return to the main interface, select install
5.external_sd the external sd card in there and find your choice below Brush Pack slider will slide from left to right starts Brush
6. Brush select reboot system after the completion of
Disclaimer: brush into this ROM willing to bear all the unpredictable consequences, I will not take any issue except the ROM. Depending on whether the brush into the personal wishes. Reproduced / modified, please indicate the source. Thanks!
Please BUG feedback or comments in the form of micro-blog, please support, scoring points praise. Download please look: ycjeson, other addresses downloading problems I have nothing.
Hide the contents of this post
pan.baidu.com/s/1i3Gbuip
Please replace the kernel of this brush to brush the bag into the kernel to obtain root privileges
Hide the contents of this post
pan.baidu.com/s/1bnlf1FL
Click to expand...
Click to collapse

is it safe to flash this one?
[REC Firmware] mate Mobile EMUI3.0 Andrews Brush Pack version 4.42. Solve the problem screen flash DPI250
switched kangVIP greatly in P6 hair pack, write new mate on this grand movement boot.img thanks!
This version is based on the official EMUI 3.0 version of the B706 make modifications , and make appropriate streamlined.
New features using inline code mode, with the original Emui style blend.
Disclaimer: Please respect the outcome of labor prohibited on this ROM for secondary packaging! ! !
EM UI 3.0 official code changes a lot, a lot of resources can not decompile, modify, greatly increased the difficulty,
do this ROM spent more than N effort.
Favorite local friends like him to support ^ _ ^
---------------------------------------- ------------------
Features:
. Automatic call recording, and remove recording tone
added split-screen multitasking switch (not compatible with split-screen mode to run the program (for example:. Ch ROM e), you can close the split-screen mode)
to revise the notification bar invisible switch:
You can select the ranks left / center / right home.
Tap / long press has the following options: flashlight | Shortcut menu | Screenshots | Locker | suspension program | Advanced Settings | Voice Assistant |
end of the current program | return key | Home key | Menu key | add volume | volume reduction | No Action
An operator Custom
Time centered option
kernel supports init.d script (which has built-in root).
The status bar displays the real-time speed.
Multitasking split-screen mode.
a modified version of the screen assistant to make more practical, use more smoothly:
All the keys are long press action to choose from, there are the following options:
flashlight | Shortcut menu | Screenshots | Locker | suspension program | Advanced Settings | Voice Assistant |
end of the current program | volume plus | volume down | menu key | Minimize screen assistant | No action
to increase the screen helper function minimization (via long press to achieve), watching movies or playing games can be displayed as a small dot
screen memory assistant position, reopened after closing (also the case after the restart the phone) before the position is consistent with the close
Join ZTE screenshots (via long press to achieve), when shots directly matting, graffiti and other
navigation bar to join the lock screen button, you can adjust the height and completely hidden.
Home key, back key, task keys, menu key, press the function selection
has the following options:
flashlight | Shortcut menu | Screenshots | Locker | suspension program | Advanced Settings | Voice Assistant |
end of the current program | volume plus | volume down | Menu key | No action
lock screen button when you need to display the menu button will automatically hide, the key position does not move, keep beautiful.
...
----------------------------------------------- -------------------------------------------------- -----
new features and optimized as follows:
1, the navigation bar to join the lock screen button, Home, return, tasks, long press function key menu options
2, the navigation bar height of their choice (24/36/40 / and completely hidden by default), modified with immediate effect.
3, the battery icon set, with the following options:
default
does not display percentages.
show only a percentage.
Hide percentage and icons.
Circular battery icon.
4, the status bar displays real-time network traffic, has the following options:
Hide
Show only upload traffic.
Show only download traffic
also shows upload / download traffic.
5, modify the ZTE screen assistant (see the specific effects of photo):
All keys long press operation can be selected
6, adding close up tone switch, disable google services and other options
7 Restart menu option added reboot to Recovery / Fastboot mode.
8, the power to customize menus and add flashlights and screenshots option
9, the pull-down notification bar calendar display
drop-down notification bar:
Click time to enter the alarm settings, press enter date settings
. Click on a date into the calendar, press to enter the date setting
10 time position to join the notification bar invisible power button, you can customize whether to use.
11, joined the operator to customize the display settings.
12, the new volume key wake-up option (no need to modify any key)
13, joined APP window operation mode, you can also start multiple app windows, and you can move the zoom window size and position.
(Mainly transplanted from mokee, part reference code F major, big thank F)
After starting in windowed mode, the program will appear in the left three buttons:
Press and hold the button on the bottom of the window size can be scaled
and hold the center button to move window position
click on the top of the button to close the current window
to modify DPI method:
Open with RE manager to edit mode system directory build.prop, add the following command:
DPI Vision: ro.sf.lcd_density = 250
single-handed operation: ro.config. hw_singlehand = 1
icon size: find ro.config.app_big_icon_size = 128, 128 into the 112 for the convenience of pollen, I had to modify the interface of 250 DPI, brush machine is that you can then modify your own! 5 * 5 because the problem can not be modified to decompile!
What BUG can self-test, the package itself is to jiyou early adopters, non-stable version, now everything is normal, no obvious BUG.
Modified suspension with large kang assistant perfect run!
http://pan.baidu.com/s/1gdGLyAf third party REC, must brush into running a batch file after unpack, Chinese show!
http://pan.baidu.com/s/1sjoGE9v Brush Pack
PS: Brush ago must double clear, after the first full start, double clear once again return to REC, you are prompted to restore ROOT permissions, select No. After skipping all the way into the system, and then restart again! Experience smooth power of 3.0 bar!
This package is a mobile version, you can extract the boot.img Unicom Unicom version Brush Pack brush into the can!
Click to expand...
Click to collapse

darkado said:
is it safe to flash this one?
[REC Firmware] mate Mobile EMUI3.0 Andrews Brush Pack version 4.42. Solve the problem screen flash DPI250
Click to expand...
Click to collapse
dude i really don't know.i flashed hrt version just now and every thing are working fine yet.if i see any bug i let you know.

I wanted to flash this one because it looks like it has kangvip features which I love on b929 and the one you posted looks like plain p6 rom. I'm backuping my phone now and I'm gonna flash this and post results.

darkado said:
I wanted to flash this one because it looks like it has kangvip features which I love on b929 and the one you posted looks like plain p6 rom. I'm backuping my phone now and I'm gonna flash this and post results.
Click to expand...
Click to collapse
that rom is just for mobile version not unicome.all out of china phones are unicome.it may harm your device or at least not workes properly.

I'm gonna use the kernel from the rom you posted.

The other rom doesnt work. So I installed the one you posted. Any idea how to center the nav bar so it's not all the way left. One bug I noticed imidiately is that when you hide the nav bar it doesnt always respond to your swipe to make it show again.

gave up on this rom. no way to clear defaults so no nova as default home. i guess i'll wait a little to install kitkat.

darkado said:
The other rom doesnt work. So I installed the one you posted. Any idea how to center the nav bar so it's not all the way left. One bug I noticed imidiately is that when you hide the nav bar it doesnt always respond to your swipe to make it show again.
Click to expand...
Click to collapse
this rom natively is in 320 dpi.i changed the dpi in system/build.prob from 241 to 320 and many deformations like navbar corrected.also navbar keys become just like lollipops :laugh: .
the rom is stable yet.
you can remove unwanted apps from kinguser tool.its wonderful:good:
as you may figure out this rom didnt came with gapps.i used this one : http://forum.xda-developers.com/showthread.php?t=2547250

Yeah but 320 is like three icons on the whole 6.1 inches Installed gold concerts cm, loving it for now.

Hello, I tested this ROM.
This is a multilingual ROM.
NFC is not supported.
Missing SIM conection method for wireless network 802.1xEAP
I can not move applications to the SD card.
The GAPPS installed without problem.
Everything else works fine for now.

need installation step by step procedure
i tried installing this rom twice bt ended up in logo stuck at bootloader....plz help.....

shaun100689 said:
i tried installing this rom twice bt ended up in logo stuck at bootloader....plz help.....
Click to expand...
Click to collapse
First you must unlock bootloader and flash a new recovery (twrp2.7).
Use the mate tookit by acbka (http://forum.xda-developers.com/showthread.php?t=2776084)
Reboot on recvovery
Wipe all.
Instal the ROM in the first page of the post
Wipe dalvin chache
Reboot.
Be patient, for 2 minutes
Reboot on recvovery
install the gapps for 4.4
Wipe dalvin chache
Reboot
Good luck

I assumed that it is fast, but sometimes it freezes ... ;-(

installed & working fine
installed & working fine...needs many UI related modifications....
one doubt--> in device details its showing my device name as "P6-C00" while in all screenshots uploaded shows "MT1-U06"
also my screen layout is 4x4 while in screenshot its 5x6
how to adjust screen DPI..?

shaun100689 said:
installed & working fine...needs many UI related modifications....
one doubt--> in device details its showing my device name as "P6-C00" while in all screenshots uploaded shows "MT1-U06"
also my screen layout is 4x4 while in screenshot its 5x6
how to adjust screen DPI..?
Click to expand...
Click to collapse
flash it again.i have no problem with my device but performance and in 320 dpi screen layout is 4x4.

changed the DPI to 320......everything seems normal.....

no data connectivity
no data connctivity....plz help
No switching default storage to SD card

No data connection
Great ROM i've try on my HAM....but i got problem on cellular data connection, it wont connect except using wifi
please help...

tarakus said:
Hello, I tested this ROM.
This is a multilingual ROM.
NFC is not supported.
Missing SIM conection method for wireless network 802.1xEAP
I can not move applications to the SD card.
The GAPPS installed without problem.
Everything else works fine for now.
Click to expand...
Click to collapse
you don't need to move apps to sd card, Huawei knows that this mate 1 has tiny internal storage, so the rom given an option to set your default storage location in external sdcard. Go to settings > Storage, and you will see the option.

11.27 [Mate EMUI3.0] split-screen multitasking | bidirectional automatic recording et

i have this one on my device and i think its smoother and more stable than previous post plus kang features.
to enable one hand ui modify the following line in /system/build.prob
ro.config.hw_singlehand = 2
Link: pan.baidu.com/s/1o6MCOR4
Password: 21nu
thanks to google translation :
ROM Name: Mate EMUI 3.0 B706
ROM size: 707 M
Adapter Version: EM UI 3.0 B706
Test models: MT1-U06
About the Author: HRT team _KangVIP
Support Forum: Pollen Club ( http://cn.club.vmall.com )
Release date: 2014/11/27
This version is based on the official P6 EMUI 3.0 B706 transplant modify production , and make appropriate streamlined.
New features using embedded code mode, with the original Emui perfect blend of style.
So the hardware are working.
From the XDA Mate CM11 kernel version (thank the original author)
Disclaimer: Please respect the outcome of labor prohibited on this ROM for secondary packaging! ! !
EMUI3.0 official code changes a lot, a lot of resources can not decompile, modify, greatly increased the difficulty,
do this ROM spent more than N effort.
Favorite local friends like him to support ^ _ ^
---------------------------------------- ------------------
Features:
. Automatic call recording, and remove recording tone, you can choose whether to display a message recording (audio file is saved in: sd card / record directory )
added split-screen multitasking switch (not compatible with split-screen mode to run the program (eg: Ch. ROM e), you can close the split-screen mode)
to revise the notification bar invisible switch:
You can select the ranks left / center / right home.
Tap / long press has the following options: flashlight | Shortcut menu | Screenshots | Locker | suspension program | Advanced Settings | Voice Assistant |
end of the current program | return key | Home key | Menu key | add volume | volume reduction | No Action
An operator Custom
Time centered option
kernel supports init.d script (which has built-in root).
The status bar displays the real-time speed.
Multitasking split-screen mode.
a modified version of the screen assistant to make more practical, use more smoothly:
All the keys are long press action to choose from, there are the following options:
flashlight | Shortcut menu | Screenshots | Locker | suspension program | Advanced Settings | Voice Assistant |
end of the current program | volume plus | volume down | menu key | Minimize screen assistant | No action
to increase the screen helper function minimization (via long press to achieve), watching movies or playing games can be displayed as a small dot
screen memory assistant position, reopened after closing (also the case after the restart the phone) before the position is consistent with the close
Join ZTE screenshots (via long press to achieve), when shots directly matting, graffiti and other
navigation bar to join the lock screen button, you can adjust the height and completely hidden.
Home key, back key, task keys, menu key, press the function selection
has the following options:
flashlight | Shortcut menu | Screenshots | Locker | suspension program | Advanced Settings | Voice Assistant |
end of the current program | volume plus | volume down | Menu key | No action
lock screen button when you need to display the menu button will automatically hide, the key position does not move, keep beautiful. Modify the size of desktop icons for 96dpi look more beautiful when the occasional splash screen, the screen brightness can be adjusted manually
...
---------------------- -------------------------------------------------- ------------------------------
new features and optimized as follows:
1, the navigation bar to join the lock screen button, Home, Returns tasks, long press function key menu options
2, the navigation bar height of their choice (24/36/40 / default and completely hidden), modified with immediate effect.
3, the battery icon set has the following options:
Default
does not display percentages.
show only a percentage.
Hidden percentage and icons.
toroidal power icon.
4, the status bar displays real-time network traffic, there are the following options:
Hide
Show only upload traffic.
Show only download traffic
also shows upload / download traffic.
5, modified ZTE screen assistant (see the specific effects of the drawings):
All the action can long press the button to select
6, adding close up tone switch, disable google service options
7 Restart menu option added to restart Recovery / Fastboot mode.
8, the power to customize menus and add flashlights and screenshots option
9, the pull-down notification bar calendar display
drop-down notification bar:
Click time to enter the alarm settings, press enter date settings
. Click on a date into the calendar, press to enter the date setting
10 time position to join the notification bar invisible power button, you can customize whether to use.
11, joined the operator to customize the display settings.
12, the new volume keys wakeup option (no need to modify any key)
13, joined APP window operation mode, you can also start multiple app windows, and you can move the zoom window size and position.
(Mainly transplanted from mokee, part reference code F major, big thank F)
After starting in windowed mode, the program will appear in the left three buttons:
Press and hold the button on the bottom of the window size can be scaled
and hold the center button to move window position
click on the top of the button to close the current window
split-screen multitasking currently still in WIP (work in progress) Some app does not support, follow-up will continue to follow up ...
...
others do not remember ^ _ ^
Click to expand...
Click to collapse
Drawings (from the telecommunications Edition) and a brief description:
Continuous Click the version number to open the "Developer Options"
split-screen multitasking start method:
(off by default, you need to open the Advanced Settings)
in the task bar long as needed The program started in windowed mode, and click the Start window mode, the program will open a window mode, and the emergence of three buttons on the left, hold down the button below the zoom window size, press and hold the center button to move the window position, click on the uppermost button to close the current window.
Enabling suspension program: Press-screen menu button (you can define your own specific key), the pop-up shortcut menu and select the program to the suspension
of new features, mainly in the "Advanced Settings" inside.
If some buttons do not appear to enter: Advanced Settings> Reset the system interface reset once.
The default screen, long press the return key aide, aide screen icon changes to a point, can be restored to their original length by
default long press the screen button to start the task assistant screenshots (specific buttons can be customized button)
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Brush risk, please make a backup before Brush!
Many local friends test feedback, Unicom | Mobile Edition can be directly brush, normal use!
-------------------------------------------------- -------------------------
Brush require third-party REC, you can download the following link REC (REC official support brush back)
CWM Chinese version REC: pan .baidu.com / s / 1mgj1rS0
: Perform inside Run.bat, then follow the prompts. -------------------------------------------------- ------------------------------
has brush into third party Recovery (CWM, TWRP, etc.) of the local Friends of the following cards can brush brush Version:
card brush version Download:
Hide the contents of this post
Links: pan.baidu.com/s/1o6MCOR4
Password: 21nu
Card brush package without decompression, the direct use of third-party REC brush into the can! ! !
-------------------------------------------------- ---------------------------------------
brushing can be no double-wipe, can not boot or then you can have a double wipe baffling problem.
-------------------------------------------------- ---------------------------------------
As many resources can not be decompiled, some resources with 16 ary modified. Do this ROM spent more than N effort.
Some built-in software, you can enter streamlined according to their needs.
Unwanted apk, you can uninstall or to your / system / app to delete (KangVIPTools.apk mainly used to implement advanced settings function, you can not delete) the / directory.
Note: Do not modify the system version number information, so as not to appear abnormal.
1. This ROM is published by Huawei pollen club HRT team, please indicate.
2. Brush risk, the process need to be cautious. Please strictly follow the instructions or tips related to the consequences of the operation, the brush caused by the owner's own commitment has nothing to do with the team and individuals.
3. If bug or a private letter, please reply to the thread
4. The final interpretation of all pollen club
Click to expand...
Click to collapse

mazi_v said:
i have this one on my device and i think its smoother and more stable than previous post plus kang features.
to enable one hand ui modify the following line in /system/build.prob
ro.config.hw_singlehand = 2
Link: pan.baidu.com/s/1o6MCOR4
Password: 21nu
thanks to google translation :
Rom is very smooth, thank you! Just curious, does anyone know how to change the DPI? I can't find the usual command line in the build prop.
Edit: solved. Just added the command line.
Click to expand...
Click to collapse

does this rom support english language ?

Javadn said:
does this rom support english language ?
Click to expand...
Click to collapse
Yes.

would one of you guys upload this rom to some other uploading web services and let us who cant download from baidu get this wonderful rom ?
EDIT : downloaded , installing the rom ATM ! will tell you the results
EDIT2 : its working Smoothly , beware that this rom is not 4.4.4 its 4.4.2

how about cellular data connection..is it working?
Sent from my HUAWEI MT1-U06 using XDA Free mobile app

zlazfazkazda said:
how about cellular data connection..is it working?
Sent from my HUAWEI MT1-U06 using XDA Free mobile app
Click to expand...
Click to collapse
I was running it on the European version. 2 GB and no NFC and I had a perfect cellular data connection.

thx dude...i'll download and try to install on my HAM
Sent from my HUAWEI MT1-U06 using XDA Free mobile app

I've installed this rom but still the problem is celular data connection that won't connect..over all this ROM is very beautiful
Sent from my HUAWEI P6-C00 using XDA Free mobile app

zlazfazkazda said:
I've installed this rom but still the problem is celular data connection that won't connect..over all this ROM is very beautiful
Sent from my HUAWEI P6-C00 using XDA Free mobile app
Click to expand...
Click to collapse
I'm running my HAM on the Wind Network in Canada and I'm not having any data connection problems at all. I have the European Variant without NFC.

i don't know what is wrong, i've followed the brush procedure using TWRP...i tried 3 different MIUI3.04.4.2 ROM with INDONESIA TELKOMSEL provider but the problem still the same, do you use first model of HAM or with 2GB RAM??

zlazfazkazda said:
i don't know what is wrong, i've followed the brush procedure using TWRP...i tried 3 different MIUI3.04.4.2 ROM with INDONESIA TELKOMSEL provider but the problem still the same, do you use first model of HAM or with 2GB RAM??
Click to expand...
Click to collapse
Mine is the the European 2 GB variant with no NFC.
---------- Post added at 02:15 PM ---------- Previous post was at 01:54 PM ----------
zlazfazkazda said:
i don't know what is wrong, i've followed the brush procedure using TWRP...i tried 3 different MIUI3.04.4.2 ROM with INDONESIA TELKOMSEL provider but the problem still the same, do you use first model of HAM or with 2GB RAM??
Click to expand...
Click to collapse
Maybe you need to add the APN?

i already did add the apn but not working...i'll wait for the developer wondering to solve the problem

Mine is Indian version 2gb ram wid no NFC.....4 days no data connection on...only on wlan
Sent from my HUAWEI P6-C00 using XDA Free mobile app

shaun100689 said:
Mine is Indian version 2gb ram wid no NFC.....4 days no data connection on...only on wlan
Sent from my HUAWEI P6-C00 using XDA Free mobile app
Click to expand...
Click to collapse
That's strange. Mine works great for data connection, aside from the fact that I couldn't customize using xposed and gravitybox. Maybe its because my network is Wind Canada and we run off of an AWS frequency? Not sure, well sorry about your luck people. I wish I had an answer to help you guys. Oh, plus it ate my battery 3 to 4 times faster when using as a daily driver.

This ROM is great!!! One day in and so far everything works for me (everything I've tried out that is). Only issue so far is a delay on incoming calls before the screen comes up allowing you to answer. I actually missed 2 calls waiting for it to come up.
Also, calendar force closes, but I think I caused that, I tried to restore my data using Titanium Backup from my previous B930 ROM. Going to reflash calendar using the aroma GApps installer and see if that fixes it.
Great job on this ROM man!!!!
Sent from my MT1-U06 using Tapatalk 2

Password.
Please!
Anyone know the password?...
Thank You.

hasbrone said:
Please!
Anyone know the password?...
Thank You.
Click to expand...
Click to collapse
YES! Everyone who read the 5 line on the FIRST post!

huggy_72 said:
YES! Everyone who read the 5 line on the FIRST post!
Click to expand...
Click to collapse
Thank You.
But, asked for the password to unzip the zip...

Anyone know ...
You can edit the build.prop to change the DPI (to 241)?
This is my screenshot: (see attached)

[N910T] Dr.Ketan ROM I S6 port I S6 Theme Store support I Multi DPI I L3

[N910T] Dr.Ketan Custom ROM L1 I Deodexed I S6 Theme support I Multi DPI
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Based on N910F and N9250
ROM Features
Inbuilt features
- Full S6 Theme support including download and system level changes.
- Multi DPI. (No S-view support)
- 300 fonts enabled
- All Language enabled
- Ad Free (you can disable from Dr.Ketan Utility)
- Auto Call Recording - Auto call record included On/Off from Dr.Ketan utility
- Manual Call Record - ROM Control - Native call record
- Power Menu -5 Way Reboot mod with sound mode
- S5 ToolBox (limited standard 5 app, samsung have seems removed code further and difficult to edit)
- 30 Quick Panel Toggles (May be Air guesture won't work)
- CSC features - Separate app for CSC features
- All App Multi Window (optional in ROM Control)
- Camera Hack - Use camera with Flash at low battery + Camera shutter sound toggle
- Call/SMS block
- Floating message
- 360 Rotation
- No Increasing ring tone.
- Wifi disconnect fix no more requires custom kernel (Extra settings-Other mode-Wifi reconnect fix - Set to 'home' If your wifi disconnect and reconnect frequently.
- Memory Clean option on expanded notification with switch (Extra setting-Memory Clean view) Also Color can be set. (Extra setting-Other Mods-color-Memory color
- Mute/Vibrate/Sound option in power menu.
- NFC hack
- Soft menu button for old app. Some older app doesn't have built in three dot menu, in certain app you will see floating three dot menu.
- One hand operation (any screen) fully working (Settings-Display-One-handed operation)
- Appoops (permission manager) Settings-LockScreen and security - Application permission
- Advanced Messaging features
Save/Restore
1K receipent limit
Disable SMS to MMS auto conversion
Split view toggle
Increase SMS/hr
Increase Image size for MMS
Screen On on MSG Toggle
No log for SMS/Email
Priority sender
Delay sending option
New lock screen unlock effects
None
Ink+
Abstract*
Geometric*
Popping
Ripple*
Stone skipping
Seasonal
Summer
Autum
Winter
(* are laggy)
- Dr.Ketan Utilities
1.Toggle
Auto record Incoming call
Auto Record Outgoing call
Auto GPS (GPS will auto ON with some common app needs GPS)
Auto Wifi (Wifi will be turn off if remains disconnected for 10min)
Auto Blutooth (will be turn off if remains unpaired for 10min)
Smart Network (Mob data will be switched off after 30 sec of screen off)
Media scanner Enable/Disable
Login security - captures image with wrong password login with multi attempts.
Ad-free
2.Tasks
EFS Backup (Link only)
Data restore Fix
IntSd FIX (fix for unable to save on intSD)
Flash recovery/Kernel/Modem from intSD
AutoScan - Enable media scan only while connected to power/USB
3.ROM
LockScreen unlock effect Particle/None/Ink
Meet here - Car finder
4.Help
general info
- ROM Control
NFC hack
Recent Panel Quick Launch (Keep App desired App shortcut on recent App)
Toggle 2G/3G
Menu key assign Menu/Recent
Native Call record enable/disable
Enable LTE option (In case missing on N910C)
Enable All App in Multiwindow
Sound Mode
- Extra Settings
Heads up Notification
Fast Charging
Popup blocker (Not sure exactly what popup blocks but should block some miscelaaneuous popup related to location,Battery etc)
TotchLight with Long pressing volume while screen off
Wifi Reconnect Fix
Usage statistics
Toggles (switch on the fly) - 1.Increasing Ring tone 2. Network Meter 3. Memory View
Color Option - 1.Internet meter 2.Memory view
- Dr.Ketan Sound Mod (Available in ROM control)
Backup
Restore
Stock
Mild boost
High boost
Custom level.- User can select custom level from 77dB to 100dB (stock level is 84dB). You needs to set (scroll) desired level from sound mod and press Apply.
- Virtual key
How to use virtual key :
Open Virtual key - Tap on Right/Left button to enable corresponding virtual keys. (long press to disable)
To assign keys- scroll selected action from tab and tap on selected item to set (message will be displayed on successful assign)
Now long press bottom corner of screen to perform selected (assigned) action.
Each key have following options to assign
None
Browser
Calendar
Contact
Home
Menu
OK Google
Power (Long Press power action)
Recent
Search
Sleep (Power button to turn off screen)
Screenshot
S-Voice
Sattelite view. Just like GPS test app this is native hidden utiltiy by samsung. Shows current height,Speed,used sattelite
Battery view
- CSC features(some features not tested)
Enable camera during call
Enable Popup Notification
Shutter sound Menu
Enable Sub Menu Symbol KB
Raise name lenth limit
Max speed dial 100
Enable call button
Enable export to SD
Message
Raise recepient limit 999
SMS to MMS threshold 999
Enable folder view
Enable font features
Enable schedule msg
Disable phone nu formatting
Phonebook digit matching
Launcher Rotation
Web exit option
Wifi client 10 for MobAP
MultiWindow addOn App
Calender export
Email White BG
Clock enable Auto on off menu
Voice call waitingtone 60
National Roaming Icon enable
Web default desktop site
Credits and Thanks : @Chainfire - Respected elite developer for supersu and his unbelievable contribution to XDA/Android community. @wanam - Respected elite developer for his awesome contribution and references to his works. @xperiacle the amazing developer for reference to his work and tools. @gharrington for 3minit battery and QuickLaunch. @Chenglu @Phil3759 @bigbiff and all other team members for custom recoveries. @ficeto for awesome custom settings. @BSDgeek_Jake for his Ad free host.
I don't own this device and it wouldn't possible to make this without testers. @egren58 @chenxiaolong @dagod80 @Squilchi @ariefabuzaky @conasabi @Amd4life @balliboxer @ann1hil4tionfyc @Dmkarkutt for their continuous support in testing,sending logs and sparing their precious time. Surely I may have missed some name here but heartly thank to all tester whom I forget to mention here. Also thanks for data fix (INTL. ROM SIGNAL FIX N910T_W8.zip) was referred to use N910F ROM on T-mobile. and couldn't locate OP of it. Tell me if you are.
XDA:DevDB Information
Dr.Ketan ROM, ROM for the T-Mobile Samsung Galaxy Note 4
Contributors
dr.ketan
ROM OS Version: 5.0.x Lollipop
ROM Firmware Required: N910T
Version Information
Status: Beta
Created 2015-07-14
Last Updated 2015-08-04

Installation Instructions and Download
Installation Instruction
Installation Instruction (MUST READ before flashing ROM)
Before proceeding it's recommended to make 'Dialer Storage (SMS/MMS/APN)' back with titanium (it will be green colored). This will helpful in case any issue editing APN.
1.Download ROM from link shown below in download.
2.You must check MD5 of downloaded ROM and it must be match with provided in download section. Always recommended to check MD5 on device itself as sometimes file can be corrupted while transferring from PC to device.
3.You must have CWM recovery on device.
4.To flash ROM root is not required but if you have never backup your EFS then I strongly recommend to root your device first (If not already) then make EFS backup before flashing ROM. Though it's not required to make EFS backup every time you flash ROM but follow developer instruction and if it is recommended with particular version then you must backup again.
You can use this tool OR can get from Play store to backup EFS.
5.ROM flashing
Copy your downloaded file to device then reboot device to recovery (must be CWM/TWRP)
Select wipe data (Factory reset)
Select to Install file and navigate to your ROM file
Flash
6.Once flashing finished and you are not already on COD6,base just flash N910T COD6 bootloader and modem
After flashing switch off device and reboot to download mode (don't select reboot to download mode option from recovery)
Download N910T bootloader and modem extract to get tar.md5 and flash using PDA/AP tab of odin.
7.It may take 8-9 min to boot keep patience.
8.READ belowfor Bug / Fix discussion.
Download 3.0
http://forum.xda-developers.com/showpost.php?p=62174736&postcount=739
​
.

Known Bug Fix and Add On
Available on ChaneLog post of current version

Reserved

I may not follow this thread regularly. Follow this main thread for any updates/Fix
http://forum.xda-developers.com/note-4/snapdragon-dev/n910g-dr-ketan-custom-rom-t2928568
http://forum.xda-developers.com/note-4/snapdragon-dev/9may15-dr-ketan-rom-multi-dpi-t3103900
.

cool can't wait to try this

Definitely going to flash this right now

Great Job!!!

booted with no problem, thanks for the port!

Downloading now! Thanks!

I'll try this out

Welcome and thank you. Downloading now

Awsone
Sent from my SM-G9250 using XDA Free mobile app

I have always wanted to try one of dr.ketan's ROMS. Now I have an opportunity to, thanks for releasing this for T-Mobile phones!

oh snap here we go, it's on now

at this point it is good to say that this is an amazing rom. but I know that the S view density cannot be changed but what app is it that controls it maybe I can use the app settings from xposed to change it to standard density

viroscope said:
at this point it is good to say that this is an amazing rom. but I know that the S view density cannot be changed but what app is it that controls it maybe I can use the app settings from xposed to change it to standard density
Click to expand...
Click to collapse
It's a complex. If available try setting for framework-res

Anyone want Viper sound with stock kernel can try this. It should work on this ROM.
http://forum.xda-developers.com/showpost.php?p=61858278&postcount=3079
.

dr.ketan said:
It's a complex. If available try setting for framework-res
Click to expand...
Click to collapse
This is what comes up as far as res

viroscope said:
This is what comes up as far as res
Click to expand...
Click to collapse
I will try to make it multi Dpi. Actually all my N4 based ROM are having S-view multi Dpi just port rom yet not added support for it.
Sent from my SM-G9250 using xda premium