Hi,
I had upgraded my Wave 2 from bada 1.2 to bada 2.0.
after completion now following are the problems i am facing.
1. Not connecting to PC via keis, USB mass storage - only i can charge my phone.
2. sometimes a blue screen appears and i have to remove battery to restart
3. sometime my wave 2 goes in upload mode or download mode.
4. i want to downgrade it to bada 1.2, but cannot do so, because of connection issues
Any Help Please
Hi
Please can you help?
I am a seasoned Android user and have had many phones that run Android.
But a friend of mine has given me this Samsung Wave 2 which runs Bata. She says it stopped working the other day after she blue toothed a song to the phone.
I have had a look at it.
You start the phone up and it instantly goes to a blue screen. The screen states the phone version and all that, but nothing about the version of OS it is running.
Here is what it states:
S/W Version: S8530+XE+JK6
Modem: Q6270B-KPRBL-1.5.45T
SHP: VPP R5 2.1.1
Build Host: SE-W019
BuildAt:2010/11/19 17:45:43
App Debug Level : 0
Then it goes on to state a buffer max failed and trying to read (5607343) size more than max buf permitted then it states the file and where it is located and there are 14 pages of this random stuff.
When I press the menu button the phone goes to the UPLOAD data to PC mode.
I've tried connecting it to my laptop, but the PC doesn't recognize it.
I've tried connecting it to Kies, and still nothing.
I've tried holding down the volume + and camera and power buttons, it then enters download mode. Other blogs say to connect the phone to Kies at this stage, but that doesn't work either.
There must be a hard reset that doesn't involve numbers * and # to be keyed in, something that uses the hardware buttons.
Anyone able to help or is the phone bricked?
P.S. I have not tried to flash the phone with software updates, I'm merely trying to get the phone to work.
Many thanks
Related
Hey guys,
I've searched the forum for like 5 hours or so
to find a thread that could help me solve this solution...
I've tried everything that had something to do with "dead"
in the BlueAngel and Blueangel Update etc. section
What it does:
- The screen stays black
- If I try to charge, the Red 'Charging' LED doesn't become red
unless I take the battery out of the Qtek and charge..
Then it gets red (WEIRD)
- No connection with activesync or rom update utilities
What happened:
- Rom update stopped after a few percentages...
If i try to get a new rom in it with or without cradle
with the following rom update utilities:
- BaUpgradeUt.exe:
then I get a Connection Error (101) when I try to update
- MaUpgradeUt_noID.exe:
ERROR 150: ROM UPGRADE UTILITY ERROR
(Rom Utility not designed for this device)
or "Finished" immediately (but it's not finished)
(Depends on the rom I use, and I used like 10 different roms)
Soft reset / Hard reset doesn't work,
I even tried to Hard Reset by holding the
Voice Record button + Power button + Reset button for 2 minutes
(I tried Camera + Power + Reset too) with the battery,
and I tried these without the battery...
No reaction...
If someone can help me, please do...
Thnx in advance
Maybe you can try thingds from this
http://forum.xda-developers.com/viewtopic.php?p=291989#291989
sep said:
Maybe you can try thingds from this
http://forum.xda-developers.com/viewtopic.php?p=291989#291989
Click to expand...
Click to collapse
Nope,
I've tried that too, but I don't get the USB or WCEUSB in mtty...
The COM ports don't react.
I know how to use it, because I used it like 10 times or somethin'
But I think the problem is, that I can't get in the bootloader mode
(or any other mode)... So there's no response from my Angel..
Thanks anyway..
have you tryed to remove battery, leave it without battery fo an hour or two then put the battery back and power on the device ?
this method may boot your device. If it worked go imediately in bot loader mode and reflash your favorite rom
If it does not helps maybe it is hardware problem ... and you should leave your device in service center
Tried this too
Isn't there any solution except for service center?
I want to know how I can solve this problem,
'cause it could happen again when I update the rom later.
And I know I'm not the only one with this problem.
It would help me and a lot of other BlueAngel owners..
Is it possible to make a serial connection with the bottom I/O port and issue the necessary commands with mtty? could be that there is some logic powered on the board but not enough to make the "USB" section powered up.. similar to serial a console cable on network gear etc. OR.. is there any known secrets such as a hardware debug mode initiated with certain pin(s) on the I/O connector.. such as grounding one or two.. any HTC tech documents floating around for troubleshooting?
You are not one with this problem. The same happens with me too.
Let searching for solution together.
If you want you can contact with me by icq: 190812766
Hi,
I have a Samsung Galaxy S Plus here which is almost brand new and has only been used for some phone/texts/emails so far.
I connected it to a PC running Samsung Kies and it told me there was a firmware update available for this phone, so i clicked ok and had it install.
During the installation, at 22%, everything freezes and locks up, it remained at 22% for 45 minutes until (after some googling) i was recommended to just turn it off / reboot it.
After rebooting, i constantly get this icon on the screen :
Copy & paste the following in a web browser (as I'm not allowed to place a link or picture apparently)... : img267.imageshack.us/img267/930/fotofg.jpg
I tried removing the battery for 10 seconds and then boot it up again - same screen.
And it doesn't matter if its connected to the PC or not, its always that screen.
And when it IS connected to the pc, samsung Kies shows the 'connecting' screen but it never actually connects.
What do I do ?
How is it possible that someone's phone gets locked/frozen for simply trying to update ?!
orangewall said:
Hi,
I have a Samsung Galaxy S Plus here which is almost brand new and has only been used for some phone/texts/emails so far.
I connected it to a PC running Samsung Kies and it told me there was a firmware update available for this phone, so i clicked ok and had it install.
During the installation, at 22%, everything freezes and locks up, it remained at 22% for 45 minutes until (after some googling) i was recommended to just turn it off / reboot it.
After rebooting, i constantly get this icon on the screen :
Copy & paste the following in a web browser (as I'm not allowed to place a link or picture apparently)... : img267.imageshack.us/img267/930/fotofg.jpg
I tried removing the battery for 10 seconds and then boot it up again - same screen.
And it doesn't matter if its connected to the PC or not, its always that screen.
And when it IS connected to the pc, samsung Kies shows the 'connecting' screen but it never actually connects.
What do I do ?
How is it possible that someone's phone gets locked/frozen for simply trying to update ?!
Click to expand...
Click to collapse
have the same problem ... did u solving ?
XXX.hard-reset.com/samsung-i9000-galaxy-s-hard-reset.html
Copy and paste into address bar not allowed to post links. Substitute xxx for www
Custom solution
Hello,
It's a big problem, but maybe can you blame samsung? However, I don't know if you have CMW, but try to boot that and than install custom rom (a zip rom). After that you can install original firmware.
If that doesn't work find a rom that works with odin, boot in download mode and install that rom, after that install original firmware.
Similar thing append to me but wile using odin i got the same screen.
What i did was connect it gain to the pc, odin detected it and was able to flash the rom.
It was pretty scary i assure you.
My advise is if the phone is brand new take it to your dealer a let them sort this out as it was not your fault at all.
If it's a brand new phone I'd use Samsung's warranty or maybe even return it.
Hello
how do i make my Wave II starting with Static Level 1 (1GHZ) on Bada 2.0 ?
Hello,
To make your wave 2 1ghz please follow the link and you will find the turorial made by me. http://www.badahub.com/forum/viewtopic.php?f=27&t=5&sid=a0a1f1d2a3d68c5c06cca7fea50f709b
Thanx
Samsung Wave 2 Blue Screen
Hi
I know this may not be the correct area, but I'm now getting desperate.
Please can you help?
I am a seasoned Android user and have had many phones that run Android.
A friend of mine has given me this Samsung Wave 2 which runs Bata. She says it stopped working the other day after she blue toothed a song to the phone.
I have had a look at it.
You start the phone up and it instantly goes to a blue screen. The screen states the phone version and all that, but nothing about the version of OS it is running.
Here is what it states:
S/W Version: S8530+XE+JK6
Modem: Q6270B-KPRBL-1.5.45T
SHP: VPP R5 2.1.1
Build Host: SE-W019
BuildAt:2010/11/19 17:45:43
App Debug Level : 0
Then it goes on to state a buffer max failed and trying to read (5607343) size more than max buf permitted then it states the file and where it is located and there are 14 pages of this random stuff.
When I press the menu button the phone goes to the UPLOAD data to PC mode.
I've tried connecting it to my laptop, but the PC doesn't recognize it.
I've tried connecting it to Kies, and still nothing.
I've tried holding down the volume + and camera and power buttons, it then enters download mode. Other blogs say to connect the phone to Kies at this stage, but that doesn't work either.
There must be a hard reset that doesn't involve numbers * and # to be keyed in, something that uses the hardware buttons.
Anyone able to help or is the phone bricked?
P.S. I have not tried to flash the phone with software updates, I'm merely trying to get the phone to work.
Many thanks
I suggest u to flash ur phone
I'm on a Japanese new phone which was never rooted (but sent to repair twice for bad front speaker/earpiece and motherboard)
It currently on Android version 5.0
Japanese version 2.15.40.13
The Phone doesnt connect to the PC, I've tried normal connection with windows explorer, tried the Asus application.
The phone either appears as empty or appears and then suddenly disappears, on and off. I can't even view the contents let alone copy/move/delete. (from the computer that is)
Is there another option to move files to the computer beside dropbox? which takes up my bandwidth and is kinda slow.
I've seen on ASUS site that there are 3 official 2.20.xxx versions yet my phone doesnt recognize anything when I press the CHECK FOR UPDATE.
Is there a way to update it without rooting ? and without doing a factory reset ?
Thanks in advance.
EDIT: I've tried this:
https://www.youtube.com/watch?v=FtQeVbKT6Zc
But I dont get the Update pop-up.
Also, Do I need to put the next available version, and update in order or just the newest/latest one ?
EDIT 2:
After a while I noticed that it didnt even copy the file to the phone.
When I connect the phone to my PC (windows 10) via USB 2.0 and/or 3.0 a folder called z00ad shows for a few sec. then disappeared.
I tried to several cables and ports.
sometimes it shows as an empty folder and sometimes I can see the folders inside but then it disappears and I get an error message.
I've got developer rights or access by tapping the kernel version.
I've enable the install by third parties option.
I've disabled the lock
disabled the screen off timer
Is it a Windows 10 thingy ? (I got the new Intel Driver for android)
EDIT 3:
Uploaded the file to Dropbox and downloaded on my phone, saved with ES File explorer to main directory, reset the phone, and now its updating. (UL-Z00A-JP-2.20.40.174-user)
When its done I will update for the next update (UL-Z00A-JP-2.20.40.183-user), and then the latest one (UL-Z00A-JP-2.20.40.185-user).
Hope Android 6 will arrive soon and that all of the problems are software related and not hardware...
Only trouble with this phone
EDIT 4:
Stuck on the INSTALLINg sYSTEM UPDATE... screen.
Its been like that for over 10 min. now, the blue progress line is stuck somewhere between the G and S (installinG System)
How long should I wait for it to finish? I saved the update file to the built-in memory, not the SD so speed shouldn't be an issue right ?
If its stuck what should I do ? Turn the phone off? Reset ? will I lose all of my files/photos?!
For this guy the problem solved itself after almost an hour...
http://forum.xda-developers.com/zenfone2/help/stuck-installing-update-t3151529
I will try to give it 2 and see how it goes
EDIT 5:
After almost 2 hours my phone was updated.
Yet still connection problems to the PC.
I'm trying the next Update, maybe it will fix this issue.
I've read online and I can't seem to find a solution.
I've tried different cables and connected to different USB slots but still, either I get no detection, or a detection with empty drive, or detection with external and internal memory but then it quickly disappears. The phone itself still keeps charging so it must be connected properly.
Has anyone else had this problem ? (I also had it while I was on Win 8.1, now win 10)
EDIT 6:
After doing the 3 available updates, manually... for around 6 hours ... I still cant connect the phone to the computer
Hello guys I hope you can help me. I have a car GPS (Unfortunately I am not allowed to publish links here but is a regular chinnese dash cam with GPS). It comes with a "board" cm84 dvp v2.1. It was working fine until one day I turned it off without knowing it was doing an Android upgrade on the back and after that it started looping while boot. So it shows the splash screen then it says that Android is upgrading - Upgrade 1 of 1 and then it just restart again. My guess is that part of the upgrades files were stored in cache and they now don't allow the GPS to boot. I know normally entering the Recovery boot via Down volume + power button I can clear cahe and even factory reset it, but the thing with this device is that it doesn't have any volume button, the only button it has is the power one so I have no idea how to access that option. Does anyone know how I can do that? Also, just in case, when I plug the device via USB to my Windows 10 laptop I see 2 units (D: and F on device manager but not on Windows Explorer.... in case there is no way to access the recovery boot because of not having a down volume button... is there any way I can just delete the cache folder content from Windows using any software? Thanks a lot in advance for any hand you can give me. I tried Coolmuster Android Eraser which detects an Unknown Android device but asks it to configure it to accept USB debugging which clearly I can't do.
Any solution?
Hello,
I am facing same issue with my device. Did you manage to find any solution to this problem.