Related
Good evening,
before I start:
HTC Desire HD
Orange Branded
Clockwordmod Recovery
I was out and about today when I recieved a nice message telling me there was a system update to download and install. I got within WiFi signal and downloaded it. when I tried to run it, it kept hanging on the ClockwordMod (CWM) Recovery page. First it told me that it couldn't mount the SD card where the update was stored. So I mounted the SD card through CWM and tried again. This time it told me that it couldn't be verified. So I turned that off too. Then it told me something else didn't work so I disabled that (sorry, I can't remember but it begins with 'A'). I tried a final time to install the update but it wouldn't work still.
Then the phone wouldn't load. It just hung on the HTC white screen for about ten mins with no movement.
I removed the battery, reloaded by pressing Vol Down + On. I have tried every menu item but the loader tells me that an image (beginning with P****.zip) is missing. It lets me load the clockworkmod recovery page so I have tried to restore a backup that I made about a week ago. It restored it, (or so it said) but when I then told it to reload it still hangs on the HTC white screen.
It's now been hanging for ten mins and I'm just leaving it.
Does it just need to be left for a long time to reload from the HTC white screen?
If it does not reload, how can I get it to?
Many thanks for your impending help!
You havent bricked your phone, a bricked phone wont power on! For future reference, remember, you cannot flash an ota update with a custom recovery installed. As you have found out it messes your device up. Ok you have 2 options.
1. Try a full wipe from the mounts and storage menu. Then try to restore your backup.
2. Flash a custom rom from recovery.
Sent from my Desire HD using Tapatalk
AndroHero said:
You havent bricked your phone, a bricked phone wont power on! For future reference, remember, you cannot flash an ota update with a custom recovery installed. As you have found out it messes your device up. Ok you have 2 options.
1. Try a full wipe from the mounts and storage menu. Then try to restore your backup.
2. Flash a custom rom from recovery.
Click to expand...
Click to collapse
I really thought restoring my backup would have done it.
I now need to try a custom rom.
AndroHero said:
You havent bricked your phone, a bricked phone wont power on! For future reference, remember, you cannot flash an ota update with a custom recovery installed. As you have found out it messes your device up. Ok you have 2 options.
1. Try a full wipe from the mounts and storage menu. Then try to restore your backup.
2. Flash a custom rom from recovery.
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
Would you happen to know where I can get the Orange ACE Rom from?
I've tried to install the Cyanogen Mod but that has got me no further.
I downloaded the most uptodate build of Cyanogen Mod (7) and copied it to my SD Card.
Through ClockworkMod Recovery I installed Cyanogen Mod and it told me that it had been successful. I restarted the phone and it got past the HTC white screen.....
I was very excited until it is not sat here on the Cyanogen Mod screen which just loads over and over again repeatedly.
Any other ideas please? I suspect I need the Orange ACE Stock Rom....is it available?
did you wipe your phone before trying to flash the new roms as AndroHero suggested?
if not try that first (you can do it via clockwork recovery or via easy full wipe from mero01 -> http://forum.xda-developers.com/showthread.php?t=868720)
-shadeless- said:
did you wipe your phone before trying to flash the new roms as AndroHero suggested?
if not try that first (you can do it via clockwork recovery or via easy full wipe from mero01 -> http://forum.xda-developers.com/showthread.php?t=868720)
Click to expand...
Click to collapse
yes, the only thing I didn't wipe was the SD card because that's where the rom / backup is stored. Do i need to completely wipe that then put the backup back on there?
as far as i know, it shouldn't be necessary. but i'm not really sure, sorry.
you could try formatting your sd card, wouldn't hurt, but maybe it would be better to wait for someone with more knowledge about android than me.
-shadeless- said:
as far as i know, it shouldn't be necessary. but i'm not really sure, sorry.
you could try formatting your sd card, wouldn't hurt, but maybe it would be better to wait for someone with more knowledge about android than me.
Click to expand...
Click to collapse
Thanks for your help so far. I am trying everything. If I could find the actual Orange Stock Rom (Ace) then I might get somewhere. I don't want to install a custom rom if not necessary.
EDIT: I have found an Orange Stock Rom (RUU). How do i install it?
I can only get to the bootloader screen so do I plug the USB cable in at this point and run the RUU from the PC once the drivers have installed? Do I put the RUU on the SD card and somehow run it from there?
i think this is the newest stock rom : http://forum.xda-developers.com/showthread.php?t=969374&highlight=orange+rom
but as AndroHero already mentioned, i think you can't flash stock RUUs with cwm recovery.
p.s. did you give easy wipe from the link from my previous post a try ?
-shadeless- said:
i think this is the newest stock rom : http://forum.xda-developers.com/showthread.php?t=969374&highlight=orange+rom
but as AndroHero already mentioned, i think you can't flash stock RUUs with cwm recovery.
p.s. did you give easy wipe from the link from my previous post a try ?
Click to expand...
Click to collapse
I must admit that i've not yet tried the Easy Wipe. At the moment I am downloading an older stock Rom (the one that was on there before this happened) and am following some other instructions to extract the PD98IMG.ZIP which appears to be missing.
I DID go through CWM to competely wipe everything with the exception of the SD card and i managed to almost get CyanogenMod working....it would work for about 20seconds before reloading again....very strange. It has given me hope though. I tried wiping everything before doing the restore of my original backup but still nothing.
the download is taking ages so I'll give easy wipe a go.....wait....
SOLVED
thank you for all who helped.
I solved this problem by downloading an older Orange Stock Rom from the link above. After that, I followed instructions in: http://forum.xda-developers.com/showthread.php?t=841890 and reinstalled the rom.zip that it mentions. Sure enough, I am back to where I started about 3 weeks ago but because everything was backed up to the cloud I really don't mind at all. Sure, I have to root it with VISIONary again to remove all the apps that Orange have stuffed in but I can cope with that.
In fact, the worst thing is that I completed Angry Birds and Angry Birds Seasons and now i have no proof!!
Thanks again all.
glad that you could finally solved it!
i, too just lost all my angry birds saves because i just downgraded so that i could root my dhd
So I installed CWM recovery, and installed the rmk root setup zip. Before I installed it, I wiped the cache but not the Dalvik cache. When I rebooted, it hung on the white HTC screen. I went back into recovery and wiped dalvik cache, cache and even data and settings, then installed the zip again and it still hangs. can somebody help me? Honestly at this point I just want to be able to use my phone again.
Thanks in advance
Did you install the root zip that included the froyo stock kernel? I made the same mistake. Just have to adb a compatible 2.3 kernel into your sdcard and flash it.
Sent from my Incredible 2 using XDA App
http://forum.xda-developers.com/showthread.php?t=1160745
i'm pretty sure this is the zip i used. if thats what you're talking about, then how do I fix it?
You cant use that .zip because it uses the Froyo kernal which is incompatible. You have to push jcase's GB kernal to your sd card then flash that.
I'm sorry for the stupid question, and thank you so much for your help, but where can i find that? and what commands do I use to push the kernel to the phone?
Have no fear as long as you can get into CWM then you are still good.
How long does it hang, sometimes it takes a few minutes for that HTC screen to go away, especially if you wiped data. you might want to wait, a little bit.
You can always download a stock rom(jcase plainjane rom), get into CWM, and then mount your USB to be able to install from your computer, and then flash the new rom.
Did you make a backup before you flashed the update, you can always recover.
DalekCaan said:
I'm sorry for the stupid question, and thank you so much for your help, but where can i find that? and what commands do I use to push the kernel to the phone?
Click to expand...
Click to collapse
If you can get into CWM, look for Mounts/Storage and mount your USB so you can access your Phones SD card from your computer, then transfer the file from your computer to your phone.
or use adb if you are familiar with that.
you did get S-Off first right?
yes i have s-off, no i did not make a recovery (i wasnt aware i could do that before i rooted but i have come to terms with the fact that I lost a bunch of data).
okay, so i put the file on my sd card and... what? is it a zip file? where can i find it?
just so i understand, once I get this rooted kernel, i will be rooted and i will be able to install the cwm app and go from there?
and i don't necessarily want the stock rooted... i guess i could go from there but for right now could i download a 2.3 kernel with a different rom? are kernels bundled with roms or do i need to install them separately?
sorry, i'm a new user so i keep having to wait 5 minutes...
Kernels, can be rom specific or bundled but currently for the dinc2 there arent a lot so make sure it doesnt say it belongs to a specific rom otherwise it might not work.
Jcase has a stock kernel and rom he put up a while back for gingerbread.
They will be a .zip file and all you have to do is using recovery choose zip file and run it, since you already deleted everything.
When you install a rom, it will add su and busybox, and root your phone. You need your phone rooted to be able to do anything, after S-off.
if you have recovery installed then you have CWM and really what you want is Rom Manager to do backups.
can i flash the tiamat kernel? do i still have an OS? will that fix things?
DalekCaan said:
can i flash the tiamat kernel? do i still have an OS? will that fix things?
Click to expand...
Click to collapse
tiamat kernel is an AOSP kernel. for CM7/MIUI/OM(F)GB
you'll get bootloops if you flash it on a sense rom.
so should i flash that, then flash something like MIUI? can i do that? and do i have to wipe data/cache/dalvik before the kernel AND before i install MIUI?
thanks
DalekCaan said:
so should i flash that, then flash something like MIUI? can i do that? and do i have to wipe data/cache/dalvik before the kernel AND before i install MIUI?
thanks
Click to expand...
Click to collapse
I would get a Rom working first which is your OS, the kernel jut says how it should run.
but apparently i have a froyo kernel installed right now? how should I fix that?
http://forum.xda-developers.com/showthread.php?t=1191836
here is a link for a gingerbread kernel...try that first
dj_wires said:
http://forum.xda-developers.com/showthread.php?t=1191836
here is a link for a gingerbread kernel...try that first
Click to expand...
Click to collapse
If you install a new rom, it will overwrite whatever kernel you have, so you might just want to install this....
http://forum.xda-developers.com/showthread.php?t=1161411
this is the first gingerbread rom i used...not a lot to it.
I'll try that thank you so much! i just have to go to "install zip from sd card" once i put it on my sd card?
DalekCaan said:
I'll try that thank you so much! i just have to go to "install zip from sd card" once i put it on my sd card?
Click to expand...
Click to collapse
Yup!
Good Luck!
Hello all just bought a new Samsung Galaxy SII from craigslist already rooted with 4.0.3 Jedi Mind Trick. After reading for what seems 4-5 hours i have been trying to put together how to properly without bricking switching it to 10.0.0 Stable as i use to use Cyanogenmod 2-3 years ago on my devices. Seem alot of things have changed and there is a cluster**** of stuff out there now. If you could direct me to a how to or show me how to do it i would greatly appreciate it!
Thanks all!
Assuming you have nothing personal to back up that you can't just download from google play or your google account again: download cyanogen 10 and it's gapps. reboot into recovery mode. factory reset, wipe data, wipe system, wipe cache, wipe dalvik. pick the install zip from sd card or so option, browse to cyanogen, then install gapps the same way. wipe dalvik again and reboot.
I was thinking of doing this myself JMT to CM10. I didn't think there was anything special to do same as flashing from any other ROM to CM10. If there is a special requirement I would think they'd post in in with the ROM post information.
Alawishis said:
I was thinking of doing this myself JMT to CM10. I didn't think there was anything special to do same as flashing from any other ROM to CM10. If there is a special requirement I would think they'd post in in with the ROM post information.
Click to expand...
Click to collapse
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?
melvinator said:
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?
Click to expand...
Click to collapse
honestly - i backed up everything to my external and then formatted the internal when i went from TW to AOSP for the last time. well worth it. nice folder clean up and then you can just manually take all the stuff you want back.
and you should just be able to odin on cwm or twrp - then flash the rom of your choice.
new ion? said:
honestly - i backed up everything to my external and then formatted the internal when i went from TW to AOSP for the last time. well worth it. nice folder clean up and then you can just manually take all the stuff you want back.
and you should just be able to odin on cwm or twrp - then flash the rom of your choice.
Click to expand...
Click to collapse
trying to look up how to do that now .... Searching the forum now... Might you be able to tell me real quick how? I already Downloaded the 5.2 file they suggest to use but can't find a working toturial that is just for flashing the cwm.
melvinator said:
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?
Click to expand...
Click to collapse
If you get stuck at the boot logo, it's called a soft brick. You don't have to use ODIN or go back to ICS. Just make sure the ROM zip you downloaded isn't corrupt (check the size/m5d if possible), wipe everything, and reboot into recovery to try installing again.
arcsine said:
If you get stuck at the boot logo, it's called a soft brick. You don't have to use ODIN or go back to ICS. Just make sure the ROM zip you downloaded isn't corrupt (check the size/m5d if possible), wipe everything, and reboot into recovery to try installing again.
Click to expand...
Click to collapse
I already used Odin to go back to 2.3.5
Btw I appreciate the help
My woman's is waiting that I fail to say I told you so -_-
melvinator said:
I already used Odin to go back to 2.3.5
Btw I appreciate the help
My woman's is waiting that I fail to say I told you so -_-
Click to expand...
Click to collapse
You won't fail. Follow the guidelines step by step. Print it out, make notes. Anything. Read. The step by step guide works... that'll get you with cwm. Then, you can flash the zip you will put on your phone... either a SU zip or just a rooted ROM. Follow flashing instructions.
Just realized - you'll be way better off if, once you have cwm on, just format the internal ONCE YOU HAVE A ROM ON AN EXTERNAL SD CARD. then flash CM10. THEN you'll have a fresh AOSP install.
Sent from my SAMSUNG-SGH-T989 using xda premium
new ion? said:
You won't fail. Follow the guidelines step by step. Print it out, make notes. Anything. Read. The step by step guide works... that'll get you with cwm. Then, you can flash the zip you will put on your phone... either a SU zip or just a rooted ROM. Follow flashing instructions.
Just realized - you'll be way better off if, once you have cwm on, just format the internal ONCE YOU HAVE A ROM ON AN EXTERNAL SD CARD. then flash CM10. THEN you'll have a fresh AOSP install.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.
melvinator said:
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.
Click to expand...
Click to collapse
Go back, format system, and then reinstall.
Sent from my SAMSUNG-SGH-T989 using xda premium
Update your recovery to twrp or cwm 6+ and don't use dark side scripts
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Please excuse my harshness but this is not as hard as many make it seem. I would say if it takes you more than a couple attempts maybe it is just not for you. I only say this because I would hate to see you mess up your phone. Now if you think a bootloop is a brick then we need to do things at a slower pace with you.
If you already have your phone rooted then
1.download goomanager from the playstore and then
2.open it up and allow it to grant permission from CM
3.hit menu button while goo manager is open
4.click on install OpenRecoveryScript
5.let it do its thing
6.reboot into your new TWRP recovery
7.Wipe/Data Factory Reset
8.Flash Rom
9.Flash Gapps
10.Reboot
You can throw in a backup of files somewhere in there if you like.... Your choice
melvinator said:
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.
Click to expand...
Click to collapse
I had a bootloop when using CWM v6.0.1.5. So a friend of mine told me he had success with CWM v6.0.1.5 Touch. So I switched to the touch recovery and... SUCCESS.
Here's the link to CWM touch and non-touch:
http://forum.xda-developers.com/showthread.php?t=1893464
A boot loop could mean a bad download or bad flash but it is most definitely NOT a bricked device. All you needed to do was get a fresh download and move it to your SD card by mounting it in recovery. Then, wipe EVERYTHING but the SD. EVERYTHING. Then flash the ROM, Gapps and whatever radio. I go from CM to AOKP to other random TW roms all the time and never have issues.
The 2 best recoveries are twrp or my favorite because I'm used to it is cwm 6.0.1.5. http://forum.xda-developers.com/showthread.php?t=1844637
Also if your phone boot loops don't freak out' just either reboot to see if that works out first and if not reboot into recovery. Also with these new recoveries do not use dark side scripts.
Factory reset
Format system
Format cache
Format data
Flash ROM
Flash gapps
Reboot and enjoy
Sent from my SAMSUNG-SGH-T989 using xda premium
This did it!
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Sorry for the necro on the thread, but I didn't want it to be stated I didn't look around some either.
I am going from JMT to CM and want to make sure it's as seamless as possible. I use CWM and usually usually use darkside complete wipes, but I read in a previous post not to use darkside. Is there a reason for this? I can't see why this wouldn't work as it's just a wipe.
Also I use Titanium Backup. Is it possible to backup my apps and data and restore them since its not TW any longer? I want to be able to restore as much of my data as possible and make sure I don't lose it.
P.S. - If thread necroing is not appreciated, I apologize.
Hey I've been rooted for about 5 months now but never really got into it deeply. I'm in need of some help, could be easy but I'm stumped. Basically I was running a custom rom which was an AOKP JB rom released back in early September. It flashed no problem and what not, and has worked flawlessly up until today when I tried to flash to a new AOKP JB rom released.
I had done nandroid backups prior to attempting. So I downloaded the rom via AOKP OTA updates and then put it on my external sd card, and updated my cwm recovery to the most recent version. I then proceeded to cwm recovery and wiped data/factory reset, wiped the cache, and wiped the dalvik cache. I believe the first time around I forgot to format system and proceeded straight to flash the rom via external sd card, but it kept saying error can't external sd card every time attempting to flash the rom. I then tried to do it from internal sd card because it was located in AOKP OTA folder and it started flashing the rom but then an error occured very early on. Now since I have restored from my nandroid backup I'm now unable to access my external sd card, my phone just won't locate it.
Basically I need help figuring out what happened and how I can get my phone to recognize my micro sd card and how to properly go about flashing this rom.
Any help is appreciated thanks in advance.
If it helps I'm with Rogers. Also is it alright that I went back to a stock rom, can I update the stock rom too without any issues?
Anyone please?
Sent from my GT-P3113 using Tapatalk HD
Please can someone give me some input?
Sent from my GT-P3113 using Tapatalk HD
So are you currently back to stock? If so, what version of stock?
Yes I'm back to stock, which was from a nandroid backup. Running 4.0.4 tried doing software update but it failed. Am I going to have to go through odin and flash stock rom to unroot and then root again? Cause my micro sd is going insane keeps getting a errors....
Sent from my GT-P3113 using xda premium
Have you tried changing recoveries and seeing if you have more luck with TWRP?
No I haven't tried it, you think it would make a difference? I have just got the new cwm prior to these issues.
Sent from my GT-P3113 using Tapatalk HD
I would be sure to have a good, clean download of the ROM you want to install on your internal SD as well as a NANDROID somewhere for worst case. Then, install TWRP through the GooManager app from the play store. Once in the app, hit the menu button and select to install a custom recovery script. That should install the newest TWRP in place of CWM.
From there, enter recovery mode. It would be recommended to go the wipe menu and choose factory reset and then dalvik. FInally, install your ROM .zip and GAPPS. Hopefully that should work and install the ROM of your choosing.
If that is without success, flashing back to Stock via Odin may be your best choice.
CamFlawless said:
I would be sure to have a good, clean download of the ROM you want to install on your internal SD as well as a NANDROID somewhere for worst case. Then, install TWRP through the GooManager app from the play store. Once in the app, hit the menu button and select to install a custom recovery script. That should install the newest TWRP in place of CWM.
From there, enter recovery mode. It would be recommended to go the wipe menu and choose factory reset and then dalvik. FInally, install your ROM .zip and GAPPS. Hopefully that should work and install the ROM of your choosing.
If that is without success, flashing back to Stock via Odin may be your best choice.
Click to expand...
Click to collapse
Now what about my micro sd card? Isn't it best to put roms on external sd cards?
Sent from my GT-P3113 using Tapatalk HD
T.Beals said:
Now what about my micro sd card? Isn't it best to put roms on external sd cards?
Sent from my GT-P3113 using Tapatalk HD
Click to expand...
Click to collapse
I personally have never flashed a custom ROM from anywhere other than my internal SD. I actually had root with numerous custom ROMs without ever using an external SD.
Alright so hopefully this sorts out my external sd card then.
Sent from my GT-P3113 using Tapatalk HD
Please let me know how it turns out.
Hello all-
I was just recently running CM 10.2 RC1 but had to do an install of the correct gapps as it was randomly rebooting. Well the device now is stuck on the Samsung Galaxy S3 screen with the BLUE cyanogen. I have access to TWRP and am able to reflash the .zip file for CM 10.2 RC1 yet it still won't boot? I did the wipe of dalvik, cache, data and system but still no luck? The device is NOT recognized in Odin. I just want to get the phone up and running again, even if it means root is lost.
Please help!!
DroidJay123 said:
Hello all-
I was just recently running CM 10.2 RC1 but had to do an install of the correct gapps as it was randomly rebooting. Well the device now is stuck on the Samsung Galaxy S3 screen with the BLUE cyanogen. I have access to TWRP and am able to reflash the .zip file for CM 10.2 RC1 yet it still won't boot? I did the wipe of dalvik, cache, data and system but still no luck? The device is NOT recognized in Odin. I just want to get the phone up and running again, even if it means root is lost.
Please help!!
Click to expand...
Click to collapse
Do you have it put into Download Mode before you plug it into the computer for Odin to recognize it? If I had it plugged in before I put mine in download mode Odin would not want to pick it up.'
Mr. Rageface
Mr.Rageface said:
Do you have it put into Download Mode before you plug it into the computer for Odin to recognize it? If I had it plugged in before I put mine in download mode Odin would not want to pick it up.'
Mr. Rageface
Click to expand...
Click to collapse
Yes it is recognized once in Download mode...sorry about that. What can I do to get it up and running? I am not new to flashing, etc so it's got me really upset that I cant get it to boot. What could possibly go wrong?
Get a sd card>download a new rom and put the rom in the sd card and flash like a normal ROM
http://fs1.d-h.st/download/00023/E5R/I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 You can download that file and put it in the PDA section once you run Odin and run it from there. This will put your phone back to the Stock Rom 4.1.1 and you can restart from there if you want.
Mr. Rageface
xXFl4sh said:
Get a sd card>download a new rom and put the rom in the sd card and flash like a normal ROM
Click to expand...
Click to collapse
I do have an sd card. Phone isn't recognized in Windows so Im not familiar with how I can get the ROM file onto the card from the computer? Can I download the latest AT&T Stock ROM and flash it via Odin?
What your saying is flash a ROM from the external SD card?
DroidJay123 said:
I do have an sd card. Phone isn't recognized in Windows so Im not familiar with how I can get the ROM file onto the card from the computer? Can I download the latest AT&T Stock ROM and flash it via Odin?
What your saying is flash a ROM from the external SD card?
Click to expand...
Click to collapse
No, with the file I told you to download you do not need to have a SD card because you can't boot into the rom you have Windows will not recognize the phone like normal to drag and drop to it. So with this file you can save it to your computer, Open Odin, put your phone into Download Mode, plug it into the computer so that Odin detects it. Then Click PDA and browse to the file you downloaded and tell it to use that file and then Run the process and it will install the original rom onto your phone.
Mr. Rageface
Edit: Sorry I did not realize your previous comment was to xXFl4sh.
Mr.Rageface said:
No, with the file I told you to download you do not need to have a SD card because you can't boot into the rom you have Windows will not recognize the phone like normal to drag and drop to it. So with this file you can save it to your computer, Open Odin, put your phone into Download Mode, plug it into the computer so that Odin detects it. Then Click PDA and browse to the file you downloaded and tell it to use that file and then Run the process and it will install the original rom onto your phone.
Mr. Rageface
Edit: Sorry I did not realize your previous comment was to xXFl4sh.
Click to expand...
Click to collapse
Ok I did the process with the file you referenced. Everything succeeded in Odin with no errors. It's still stuck on just showing the Samsung Galaxy SIII screen but now without the blue cyanogen? What is wrong with this phone??
DroidJay123 said:
Ok I did the process with the file you referenced. Everything succeeded in Odin with no errors. It's still stuck on just showing the Samsung Galaxy SIII screen but now without the blue cyanogen? What is wrong with this phone??
Click to expand...
Click to collapse
Can you get into recovery mode by any chance? If you can do that then it should be possible to do a factory reset from within Recovery Mode and possibly get you past the boot screen. If that doesn't help let me know and I will see what else I can find out for you. Also what all did you have checked and unchecked when you Ran Odin to reinstall the Stock Rom? If you had any of them other than Auto-Reboot on that may also have caused a problem http://forum.xda-developers.com/showthread.php?t=1722686 here is a forum that will show you how to use Odin. I apologize for not remembering about telling you what to check and uncheck. But try recovery mode first and do a factory reset and if that does not work, redo the odin install this time only having Auto-Reboot checked.
Mr.Rageface
Mr.Rageface said:
Can you get into recovery mode by any chance? If you can do that then it should be possible to do a factory reset from within Recovery Mode and possibly get you past the boot screen. If that doesn't help let me know and I will see what else I can find out for you. Also what all did you have checked and unchecked when you Ran Odin to reinstall the Stock Rom? If you had any of them other than Auto-Reboot on that may also have caused a problem http://forum.xda-developers.com/showthread.php?t=1722686 here is a forum that will show you how to use Odin. I apologize for not remembering about telling you what to check and uncheck. But try recovery mode first and do a factory reset and if that does not work, redo the odin install this time only having Auto-Reboot checked.
Mr.Rageface
Click to expand...
Click to collapse
Thanks man! I went back into Recovery and did a factory reset/wipe data and it finally got past that screen. Thanks again for your guidance and help. Any ideas as to what could have possibly caused the issue in the first place? I do want to re-root the device again and I am assuming my best bet is to flash a Stock ROM like you referenced with ROOT injected? What order should I follow, flashing a Stock w/Root injected...and then the Recovery of choice? Or vice-versa? What do you recommend?
Again, your timely responses were greatly appreciated. Was really worried I would have to take it to ATT.
DroidJay123 said:
Thanks man! I went back into Recovery and did a factory reset/wipe data and it finally got past that screen. Thanks again for your guidance and help. Any ideas as to what could have possibly caused the issue in the first place? I do want to re-root the device again and I am assuming my best bet is to flash a Stock ROM like you referenced with ROOT injected? What order should I follow, flashing a Stock w/Root injected...and then the Recovery of choice? Or vice-versa? What do you recommend?
Again, your timely responses were greatly appreciated. Was really worried I would have to take it to ATT.
Click to expand...
Click to collapse
It could have been several things that could cause the ROM to do that. I recommend that you make sure that your Bootloader is up to date and then go from there. Download the newest CWM, do a backup of your current rom so that you can flash back to it if you phone messes up. Then when you try to install a new ROM make sure you Wipe: Data then Cache, then Dalvik Cache in Advanced then Format /System. Then from there Install the new Rom, then install the correct GApps, then wipe Cache and Dalvik cache then Reboot into System. It takes messing up a few times to get it right but as long as you follow the guides pretty close and keep a good backup that you know works or keep the knowledge of how to Inject the Stock Rom to your phone when it messes up you shouldn't have much to worry about.
Mr. Rageface
Mr.Rageface said:
It could have been several things that could cause the ROM to do that. I recommend that you make sure that your Bootloader is up to date and then go from there. Download the newest CWM, do a backup of your current rom so that you can flash back to it if you phone messes up. Then when you try to install a new ROM make sure you Wipe: Data then Cache, then Dalvik Cache in Advanced then Format /System. Then from there Install the new Rom, then install the correct GApps, then wipe Cache and Dalvik cache then Reboot into System. It takes messing up a few times to get it right but as long as you follow the guides pretty close and keep a good backup that you know works or keep the knowledge of how to Inject the Stock Rom to your phone when it messes up you shouldn't have much to worry about.
Mr. Rageface
Click to expand...
Click to collapse
Sounds good. Thanks for the info. Obviously the device is not currently rooted or did the Factory Rom file you gave me have root injected? Do you have a recommended way of achieving Root with the Samsung SG3? Just installing a custom Recovery won't achieve Root, correct?
Thanks!
DroidJay123 said:
Sounds good. Thanks for the info. Obviously the device is not currently rooted or did the Factory Rom file you gave me have root injected? Do you have a recommended way of achieving Root with the Samsung SG3? Just installing a custom Recovery won't achieve Root, correct?
Thanks!
Click to expand...
Click to collapse
BTW, how can I confirm I have the most recent bootloader version? It looks like my phone's current baseband version is i747UCDLK3. I did download the boot_CWM_i747UCDMG2.zip file and put it on the internal storage. Do I just want to flash that file to update my bootloader?
Thanks again!
-Jay
Yea that is the newest baseband and yea you just flash it. As far as rooting the phone and everything I recommend this forum. http://forum.xda-developers.com/showthread.php?t=1725839 It has just about everything you could need to know!
Mr.Rageface
Mr.Rageface said:
Yea that is the newest baseband and yea you just flash it. As far as rooting the phone and everything I recommend this forum. http://forum.xda-developers.com/showthread.php?t=1725839 It has just about everything you could need to know!
Mr.Rageface
Click to expand...
Click to collapse
Thanks for the information. The phone that has been all screwed up and the reason I posted a thread in the first place is my gf's GS3. I have her's rooted again and running. I am going to update her baseband version and then install a custom ROM so she's up to 4.3.1. As far as mine goes, I have been fine. I myself also still have the outdated bootloader version. Is it ok to just flash that update for the bootloader without it doing anything wrong? I'm asking this since I'm rooted and running a custom ROM with no current problems. In other words, I don't want to end up saying "it wasn't broke, why did I mess with it" ? I did bookmark that thread you referenced in your last message. Damn that thread is LOADED with just about everything one would possibly need to know about Android and making it their own.
So my g/f accepted the OTA update today (not knowing obviously) and she got updated to 4.3 via AT&T, unfortunately!! I attempted to flash the latest Liquid Smooth ROM and I continue to get a FAILED message during installation. It mentions a bunch of bootloader numbers ( I am assuming the only ones this ROM is compatible with?) So is there any way to roll the bootloader back to a compatible one or just go a different route for the custom ROM?
Also, I attempted flashing the file to update my baseband yet when I so into the device, it doesn't show as having the updated version? Is there a different way of doing it or maybe a different file?
I'm not to sure about the troubles that may come about since your gf went with the 4.3 OTA but If I am not mistaken it will need to be downgraded before you try doing anything else to it and if it is not showing that you updated your bootloader on your phone I recommend grabbing the App called Root Checker to double check then look for another file, tho unless it failed it should have updated it or messed up your phone one.