This is a ClocworkMod 6.0.1.4 Touch recovery blob for official ASUS Jelly Bean
IF YOU INSTALL THIS RECOVERY BEFORE APPLYING THE OFFICIAL ASUS JELLY
BEAN UPDATE YOU WILL BE UNRECOVERABLY BRICKED WITHOUT EXCEPTION
install with fastboot
Code:
fastboot -i 0x0B05 flash recovery CWM-Touch.blob
also attached is root with busybox
nice.
Sent from my Transformer Pad TF300T using Tapatalk 2
Great job!!! I need this!
:good:
i get a assert failed getprop ro.product.device = tf300t get prop /********** tf300t
error when flashing cm9 or cm10
also data/factory reset never finishes
kindrudekid said:
i get a assert failed getprop ro.product.device = tf300t get prop /********** tf300t
error when flashing cm9 or cm10
also data/factory reset never finishes
Click to expand...
Click to collapse
default.prop was pulled from the recovery ramdisk of the JB OTA, and it has ro.product.device=EeePad.
I have got backup and restore working and it looks like CWM is doing a low level format so it's gonna take a very long time to to complete. not sure if I can do anything about that.
updated default.prop canged:
Code:
ro.product.device=EeePad
to
Code:
ro.product.device=tf300t
Can you flash roms with this? Twrp is having problems with that it looks like
Sent from my SGH-T989 using xda app-developers app
Anybody try this yet?
Sent from my Transformer Pad TF300T using Tapatalk 2
updated to 6.0.1.2 fixes slow wipe.
So only the OTA jelly bean guys can use this?
Sent from my Transformer Pad TF300T using XDA Premium HD app
keynith said:
So only the OTA jelly bean guys can use this?
Sent from my Transformer Pad TF300T using XDA Premium HD app
Click to expand...
Click to collapse
it also works if you download the update from the ASUS website, how it works with custom ROMS or older version's
of the official ASUS OS is unknown.
If I'm on twrp jb ota will this overwrite it?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
updated to fix installing official firmware from OS (copy update file to internal storage).
untermensch said:
updated to fix installing official firmware from OS (copy update file to internal storage).
Click to expand...
Click to collapse
Does that mean I can just flash the newer CWM zip... in the older CWM?
moisaal said:
Does that mean I can just flash the newer CWM zip... in the older CWM?
Click to expand...
Click to collapse
even m not getting it!!!
file name are same size is different
which is which
does the newer heavier sized CWM Touch
fix the data wipe issue?
can i install cm10 with this recovery?
moisaal said:
Does that mean I can just flash the newer CWM zip... in the older CWM?
Click to expand...
Click to collapse
Not cwm flashable
Transformer tf300 Jellybeaned
kindrudekid said:
even m not getting it!!!
file name are same size is different
which is which
does the newer heavier sized CWM Touch
fix the data wipe issue?
can i install cm10 with this recovery?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=30591372&postcount=9
I have tried for several hours to write the CWM-Touch.blob to /staging while in recovery with dd
it always results in recovery not working, if I write the same file to staging in the same way from
the Android OS it works fine.
I think if you try to install a recovery or kernel with this recovery you will be ****ed.
does this give me root access on the tf300t and give me the ability to create a recovery method?
I am soooo new at this so please be kind
I have the tf300t with jellybean and I really want root access.
Thanks..
bflatmajor said:
does this give me root access on the tf300t and give me the ability to create a recovery method?
I am soooo new at this so please be kind
I have the tf300t with jellybean and I really want root access.
Thanks..
Click to expand...
Click to collapse
Yes. You can root if you are unlocked which i hope you do have.
After getting the CWM,flash the attached file from recovery to get root.
Reboot and install Super Su from Playstore and open it.
It will ask for updating binaries. Update.
**Credits to Orginal creaters**
skr_xd said:
Yes. You can root if you are unlocked which i hope you do have.
After getting the CWM,flash the attached file from recovery to get root.
Reboot and install Super Su from Playstore and open it.
It will ask for updating binaries. Update.
Click to expand...
Click to collapse
Ok.. so I am not unlocked.. which means my bootloader is locked.
So the process, for me, should be
1..... download the unlock tool from asus.
2..... install/run the unlock tool that was downloaded
3..... follow the instructions in this thread to get rooted and create a valid recovery..
Is the above correct?
TIA
Related
Got a notification for a system update. Pulled the link from logcat:
http://android.clients.google.com/p....signed-yakju-ITL41F-from-ITL41D.11bbbccb.zip
Sorry if this has already been posted.
Many thanks - I also got the update when I checked it
It downloaded a zip file to my phone. What do I do with it?
Thanks.
Rik.
Sent from my Galaxy Nexus using Tapatalk
Just had my notification for the update
Just downloaded, its only 960k?
Edit
Am on custom rom is why its a zip. Only can be used on stock I guess.
Sent from my Galaxy Nexus using xda premium
aindow said:
It downloaded a zip file to my phone. What do I do with it?
Thanks.
Rik.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Flash it from ClockworkMod recovery
Use this guide to root:
http://forum.xda-developers.com/showthread.php?p=19465384&posted=1#
Install RomManager from the market then flash ClockworkMod recovery from there and flash the .zip from there
Or just wait for it to come OTA
spences10 said:
Flash it from ClockworkMod recovery
Click to expand...
Click to collapse
You tried?
Sent from my Galaxy Nexus using xda premium
The Gingerbread Man said:
Just downloaded, its only 960k?
Click to expand...
Click to collapse
yes it's only 960kb
spences10 said:
Flash it from ClockworkMod recovery
Use this guide to root:
http://forum.xda-developers.com/showthread.php?p=19465384&posted=1#
Install RomManager from the market then flash ClockworkMod recovery from there and flash the .zip from there
Or just wait for it to come OTA
Click to expand...
Click to collapse
Thanks am rooted and got cwm. Guess we loose root after flashing
Sent from my Galaxy Nexus using xda premium
oscillik said:
yes it's only 960kb
Click to expand...
Click to collapse
Just seems rather small,: had a look through and looks to be a lot of things. Thought could be a bad download.
Sent from my Galaxy Nexus using xda premium
The Gingerbread Man said:
Just seems rather small,: had a look through and looks to be a lot of things. Thought could be a bad download.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
screenshots showing update size
from all accounts so far, the update has only really made changes to the kernel. so the update would only be small.
I'm stock so I just applied it and it seems fine. No obvious changes. I tried a USB game controller and it still didn't work so I think its just the volume bug fix (although there are alot of patch files in the zip).
I don't know how to apply it manually I'm afraid now we don't have the /sdcard partition accessible via USB mass storage. Could try renaming to update.zip, putting in the root of MTP storage, booting into recovery (hold vol down and power) and see if it can be applied?
footboydog said:
Got a notification for a system update. Pulled the link from logcat:
http://android.clients.google.com/p....signed-yakju-ITL41F-from-ITL41D.11bbbccb.zip
Sorry if this has already been posted.
Click to expand...
Click to collapse
Thanks for posting this!
footboydog said:
I'm stock so I just applied it and it seems fine. No obvious changes. I tried a USB game controller and it still didn't work so I think its just the volume bug fix (although there are alot of patch files in the zip).
I don't know how to apply it manually I'm afraid now we don't have the /sdcard partition accessible via USB mass storage. Could try renaming to update.zip, putting in the root of MTP storage, booting into recovery (hold vol down and power) and see if it can be applied?
Click to expand...
Click to collapse
i've already tried that, it doesn't work unfortunately
The Gingerbread Man said:
Just seems rather small,: had a look through and looks to be a lot of things. Thought could be a bad download.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Yeah you loose root, but that guide didn't take five minutes to get back root again, when you flash it from cwmr there is a lot of updates going on
Just downloaded from my stock GN, 0.94mb and when I try to open it says Cannot open file. Ah well, guess I have to wait for tommorow.
spences10 said:
Yeah you loose root, but that guide didn't take five minutes to get back root again, when you flash it from cwmr there is a lot of updates going on
Click to expand...
Click to collapse
Will probably wait and hope the roms are updated tomorrow. If I didn't have work at 6.30am id go and root again tonight but really can't be assed right now lol
Sent from my Galaxy Nexus using xda premium
Whats needed here if we rooted with Superboot R3?
Evostance said:
Whats needed here if we rooted with Superboot R3?
Click to expand...
Click to collapse
Rom manager, then to flash cwm recovery through that and then root again (optional)
Sent from my Galaxy Nexus using xda premium
CWM won't work if you have encrypted your device. Damn...
Instructions how to ROOT Official Bell Android 4.0.4 firmware version v20e
Original thread
0. Extract P930_v20e_ROOT folder from attached file to C: drive
1. Flash v20e firmware (you can use official tool or UpTestEX_mod2_marwin.exe method)
2. Turn on USB debugging and Unknown Sources
3. Install LG_SystemBackupTest.apk and start it
4. Wthout touching anything press&hold power button and reboot, after reboot your phone must lags (you can see it by unlock in lockscreen)
5. Connect phone to PC and start root_P880.bat
6. Wait until phone reboots several times.
7. If you get root, you can delete SystemBackupTest app that you have installed on 3d step, because phone will lag with it
ISSUE - after the root the system storage is 315 MB only
kavena78 said:
ISSUE - after the root the system storage is 315 MB only
Click to expand...
Click to collapse
No issues. 2.15Gb total space
Please see the attached image, it is showing 315mb. I am getting low space warning. Pls help
Sent from my LG-P930 using xda app-developers app
kavena78 said:
Please see the attached image, it is showing 315mb. I am getting low space warning. Pls help
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
Factory reset.
Sent from my LG-P930 using xda premium
yes it works after factory reset, thanks
Recovery Boot Error
ROM Manager recovery boot failed
Secure booting Error!
Cause: boot certification verify
Any help pls
kavena78 said:
ROM Manager recovery boot failed
Secure booting Error!
Cause: boot certification verify
Any help pls
Click to expand...
Click to collapse
You can only install CWM when coming from a Gingerbread official ROM. Meaning you have to follow unbricking instructions to downgrade to an official Gingerbread ROM, then flash CWM using that. Currently there is no CWM-flashable version of Bell's ICS though, but one will probably pop up soon.
hi and help please
5. Connect phone to PC and start root_P880.bat for this do i use mass storage or the LG software?
also when i run the root_P880.bat i get only fail and cannot open and acess denied in the command prompt
the cell reboots twice and then the command prompt window closes
i need help
thank you
edit : it worked
i'll keep y original post just to show that when you get this issue
just try agin and again and again (from run the app and reboot part)
cheers to you for finding and posting this method
Once you do this method is it possible to unroot without going through the unbricking guide and reflashing the ROM?
Edit: NVM it looks like you can do it with the SU app, it says so on the second last page of original thread.
CWM
So is anyone working on a cwm recovery image for ics now that we have an easy root method? is this a simple thing to do?
cashy57 said:
So is anyone working on a cwm recovery image for ics now that we have an easy root method? is this a simple thing to do?
Click to expand...
Click to collapse
It already exists:
Bell version - http://forum.xda-developers.com/showthread.php?t=1837533
AT&T version - http://forum.xda-developers.com/showthread.php?t=1803617
@drumist,
I think he's asking if there's a version of CWM that can be flashed while on official ICS and the answer to that is no, unfortunately not with the ****ty ICS bootloader.
Sent from my LG-P930 using Tapatalk 2
Malnilion said:
@drumist,
I think he's asking if there's a version of CWM that can be flashed while on official ICS and the answer to that is no, unfortunately not with the ****ty ICS bootloader.
Click to expand...
Click to collapse
Oops, you're right.
to unroot it s really simple
just do the update to ICS again (via the lg prog) i did it ,and it works easy
Does this root method work on the at&t model v20c also ? Thanks
Worked perfectly on the first try. Thanks
does it work on att v20c?
divingbora said:
does it work on att v20c?
Click to expand...
Click to collapse
no
Will this work on my SU640 running on V20d?
Sent from my LG-SU640 using xda premium
The JB OTA version of the recovery can now be found via the main TWRP thread:
http://forum.xda-developers.com/showthread.php?t=1672108
eyeballer said:
Note that backup and restore of /boot (rom kernels) won't work. So after a restore you'll need to reflash the rom.
Click to expand...
Click to collapse
You mean reflash the rom's kernel?
Anybody tested this?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Worked great on my unlocked JB Tab. Excellent.
Just booted to recovery and Rooted
Edit:
after flashing root-signed, rooting not successful still
skr_xd said:
Worked great on my unlocked JB Tab. Excellent.
Just booted to recovery and Rooted
Edit:
after flashing root-signed, rooting not successful still
Click to expand...
Click to collapse
Have you tried updating superuser binary from the superuser app after flashing?
brave enough skr_xd!!
Flashed this too! Works!
For root i used voodoo app to restore it.
I updated su binary, to 3.1.1 i think.. first time failed, and retried and worked!
Also root apps worked too (eg TiBu for restoring my apps..)
skr_xd said:
Worked great on my unlocked JB Tab. Excellent.
Just booted to recovery and Rooted
Edit:
after flashing root-signed, rooting not successful still
Click to expand...
Click to collapse
Yeah, I had this too. Just root it manually from adb in the recovery. That worked fine for me.
TXKSSnapper said:
Have you tried updating superuser binary from the superuser app after flashing?
Click to expand...
Click to collapse
Not working.
Paschalis said:
brave enough skr_xd!!
Flashed this too! Works!
For root i used voodoo app to restore it.
I updated su binary, to 3.1.1 i think.. first time failed, and retried and worked!
Also root apps worked too (eg TiBu for restoring my apps..)
Click to expand...
Click to collapse
Thanks
Had no other choice as my recovery hanged.:laugh:
Zamboniman said:
Yeah, I had this too. Just root it manually from adb in the recovery. That worked fine for me.
Click to expand...
Click to collapse
O.k. thanks
Paschalis said:
You mean reflash the rom's kernel?
Anybody tested this?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
Well you can fastboot flash the kernel, or since you're in recovery just reflash the rom before rebooting.
eyeballer said:
Call for testers: http://techerrata.com/file/twrp2/tf300t/tf300t-jb.blob
fastboot -i 0x0b05 flash recovery tf300t-jb.blob
This is TWRP 2.2.1.3 repackaged with the kernel from the OTA. This is ONLY for people on the jb OTA that have a "hanging" recovery.
Note that backup and restore of /boot (rom kernels) won't work. So after a restore you'll need to reflash the rom. But hey.. hopefully you won't be bricked
Of course, the standard disclaimer applies that you flash at your own risk.
Click to expand...
Click to collapse
Nope... doesn't work... The screen just hangs after
sending 'recovery' (4 KB)... OKAY [ 0.048s]
writing 'recovery'... OKAY [ 3.382s]
finished. total time: 3.431s
jujjk said:
Nope... doesn't work... The screen just hangs after
sending 'recovery' (4 KB)... OKAY [ 0.048s]
writing 'recovery'... OKAY [ 3.382s]
finished. total time: 3.431s
Click to expand...
Click to collapse
That's normal.... Now hold power until it powers off, then power on, you should see a blue bar flash by then it'll reboot again, then try to get into recovery.
eyeballer said:
That's normal.... Now hold power until it powers off, then power on, you should see a blue bar flash by then it'll reboot again, then try to get into recovery.
Click to expand...
Click to collapse
I did. There's no blue bar. And fastboot -i 0x0b05 reboot doesn't do anything.
Works!
Thank you sir! Just did it. It worked! Booted in recovery and made a back up on my sd card to test.
Got my TWRP back!. :thumbup:
Is it safe to go back and forth to HYDRO ROM? (The stock base ICS rom) or any other custom rom out from this prepacked TWRP?
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
jujjk said:
I did. There's no blue bar. And fastboot -i 0x0b05 reboot doesn't do anything.
Click to expand...
Click to collapse
Try this either from terminal in phone or via adb shell:
su
dd if=/sdcard/tf300t-jb.blob of=/dev/block/mmcblk0p4
reboot
Sent from my Galaxy Nexus using xda premium
Has anybody been able to flash back to cm?
I do it with fastboot method:
Code:
fastboot -i 0x0b05 flash recovery tf300t-jb.blob
Fastboot say me OK, an the screen was freeze with the blue bar, I reboot making Vol-down+power and then power again with Vol-Down+Power and all is right but when I Vol-Up, the screen freeze with:
Booting Recovery kernel image
Click to expand...
Click to collapse
My TF300T actally isn't rooted, and ADB method doesn't works. Somebody has Idea how to reflash recovery?
Thanks a lot...
P.D. With this failure I can't reflash rom....
Pnx said:
My TF300T actally isn't rooted, and ADB method doesn't works. Somebody has Idea how to reflash recovery?
Thanks a lot...
P.D. With this failure I can't reflash rom....
Click to expand...
Click to collapse
If you were rooted before the update (I believe) the su files were left intact. You just need to reinstall superuser. I recommend getting SuperSU from the market. It will update the su files when you first launch it. If you still don't get root it has options to clean up and reinstall su.
With root back you can use the adb method; which is what I did. And it worked perfectly.
Sent from my Galaxy Nexus using xda premium
DMardroid said:
Thank you sir! Just did it. It worked! Booted in recovery and made a back up on my sd card to test.
Got my TWRP back!. :thumbup:
Is it safe to go back and forth to HYDRO ROM? (The stock base ICS rom) or any other custom rom out from this prepacked TWRP?
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
I would wait.
Since boot partition is not supported yet, you need to manually flash kernel.
So twrp didnt work on jb because of new kernel, 3.1 instead of 2.6?
So when twrp for jb, supports restore of boot partition(kernel), and someone restores to a ics rom, will the recovery work? Or will need to restore recovery too?
Sent from my MB860 using xda app-developers app
Yup I shoulda waited. Tried to flash the new CM 4.1.1 nightly and wouldn't boot. Then tried to restore backup of official JB and won't boot either. So stuck on Asus boot screen now. Weird, yesterday tried to restore to Hydro from official JB and wouldn't boot, so I then restored my official JB back up and it worked but not anymore. Is thus an official brick?
Sent from my Nexus S 4G using Tapatalk 2
DMardroid said:
Yup I shoulda waited. Tried to flash the new CM 4.1.1 nightly and wouldn't boot. Then tried to restore backup of official JB and won't boot either. So stuck on Asus boot screen now. Weird, yesterday tried to restore to Hydro from official JB and wouldn't boot, so I then restored my official JB back up and it worked but not anymore. Is thus an official brick?
Sent from my Nexus S 4G using Tapatalk 2
Click to expand...
Click to collapse
I hope for you not! Can you access fastpoot or recovery?
If yes, dont rush! Ask before your next moves!
Sent from my MB860 using xda app-developers app
[ROM] JWR66V JB 4.3 [Flash-able] (Takju) & boot loader -Now deodexed v. is available!
Made flashable though Dsixda's toolkit, Thanks to dsixda for that toolkit!
I can't assure that this works on your Nexus, I ahve tested .zip files myself and works well on my Nexus!
If YOU get BOOTLOOP:
Flash another ROM and then wipe cache and dalvik cache and then flash this ROM!
Flash it at your own risk!
This isn't so good flashable.zip so you may end up to boot loop!
Use Fastboot to fix or any other fixing method!
If you don't have fastboot drivers install them from here: (It's for verizon variant, but works on Maguro)
www.samsung.com/us/support/owners/product/SCH-I515MSAVZW#
HOW TO PULL BACKUP FOLDER:
in terminal / command prompt:
adb pull /mnt/shell/emulated/clockworkmod/backup/
_______________________________________
Installing this ROM:
recommended dirty flash to make this booting!
NEW Bootloader: (bootloader-maguro-primemd04)
Downlaod:
https://docs.google.com/file/d/0BxlYDVLp_RkMaDQ2Yl8zM2NSdm8/edit?usp=sharing
Flashing through Fastboot:
fastboot flash bootloader bootloader-maguro-primemd04.img
fastboot reboot-bootloader
Untouched JWR66V, only made to flashable:
Download:
links removed!
De-odexed and rooted Flashable:
links removed!
------------------
Ohhh yes...downloading now, good job
Initial Review/Impressions:
Install went as smooth as any other flash install. It looks basically the same but the screen transitions are really smooth (note that I have not installed any apps yet, will update when I do). The first major difference you see is with the camera, the interface has been changed a bit and it does look cleaner, all the usual settings are there i.e. Photosphere etc.
I haven't noticed anything else at a first glance but I will keep on updating as I go along and I will also do a proper battery test.
The usual array of Google apps are pre-installed, although now Google Keep is also added, default browser is the regular android browser though, not Chrome. The usual wallpapers and live wallpapers are present, nothing new here either.
Thanks for making this available so quickly
it is necessary to update the bootloader?
it is unlocked bootloader?
x3m.zone said:
it is necessary to update the bootloader?
it is unlocked bootloader?
Click to expand...
Click to collapse
Nope!
If I flash the zip, i wont lose my data on sd card, right?
Sent from my Galaxy Nexus using xda premium
nudou350 said:
If I flash the zip, i wont lose my data on sd card, right?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
If you just wipe cache and dalvik cace
Gotta try that .zip file myself too
I can just flash the rom right? What's the bootloader update for then?
Is this rootable with SuperSU flashable zip? Does this zip changes the recovery?
Thanks in advance
nudou350 said:
If I flash the zip, i wont lose my data on sd card, right?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
No, it's just like flashing any other rom. Wipe /system, /cache, /data, and dalvik-cache
lparcshinoda said:
Is this rootable with SuperSU flashable zip? Does this zip changes the recovery?
Thanks in advance
Click to expand...
Click to collapse
I am trying to flahs that .zip file myself but for some reason Ubuntu on my PC doesn't work well.. so I ahven't föashed JB 4.3 yet and root should work if you flash it..
No it doesn't change your recovery
lparcshinoda said:
Is this rootable with SuperSU flashable zip? Does this zip changes the recovery?
Thanks in advance
Click to expand...
Click to collapse
https://plus.google.com/113517319477420052449/posts/9rcWNJbVZkL
Chainfire himself says it is, also he seems to be a reliable source for this kind of information since he made SuperSU and tested it on Nexus (devices?) himself.
De-odexing.... it takes a while...
whats kernel number ? 3.0.81 ?
AndrolinRoot said:
whats kernel number ? 3.0.81 ?
Click to expand...
Click to collapse
3.0.72
Sent from my Nexus Prime
If I flash the bootloader, I will lose my data ? Like , everything, including music, videos, etc ?
Sent from my Galaxy Nexus using xda premium
sorry for a nob question but i have to flash bootloader first than. zip file through TWRP??
Sent from my Galaxy Nexus using xda premium
nudou350 said:
If I flash the bootloader, I will lose my data ? Like , everything, including music, videos, etc ?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Nope
nudou350 said:
If I flash the bootloader, I will lose my data ? Like , everything, including music, videos, etc ?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
No, only risk is that IF something goes wrong during flash you can say bye to your Device :good: I've done this MANY times and never had problems, so... good luck to you (and me, since I'm doing it right now)
Follow the steps to install directly from the Factory Images without loosing any of your data on the SD-Card.
http://forum.xda-developers.com/showthread.php?t=1995482
The AndroidRoot.Mobi Team is proud to present Flatline: Nvflash for TF300T Jellybean!
This release allows generating nvflash blobs for your specific device, making your device unbrickable as long as you have a copy of the blobs.
As a brand new feature, it will also enable wifi and upload a copy of the blob to androidroot's server. Later, a solution will be released to retrieve the blobs from the server if you ever loose them.
https://www.androidroot.mobi/pages/guides/tegra3-guide-nvflash-jellybean/
Credit goes to the AndroidRoot.Mobi team:
Bumble-Bee (Apache14), IEF, kmdm, lilstevie & RaYmAn.
thanks
your link don't work
https://www.androidroot.mobi/introducing-flatline-nvflash-for-jellybean-n7v1-t201-tf300t-tf700t/
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
okrasitna said:
thanks
your link don't work
https://www.androidroot.mobi/introducing-flatline-nvflash-for-jellybean-n7v1-t201-tf300t-tf700t/
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
try this https://www.androidroot.mobi/pages/guides/tegra3-guide-nvflash-jellybean/
I cant test it on my tf300t since i done it during ICS, but it did work successfully on my JB tf700
So, having read the guide thoroughly, if already on the JB bootloader (10.4.20.0), is it necessary to update to the latest firmwares before running this or can I do it on 10.4.20.0? I note that the guide references bootloader 10.6.1.15.3. Also, anyone know whether doing the NVFlash thing wipes the user data?
Thanks in advance. Looking forward to running this on my TF300T once I get my ducks in line.
Wow! Good news .
Is it working with 10.6.27.1 bootloader, or will it work?
Thanks rayman, XpLoDWilD & Androidrootz team!
Hazard17 said:
Is it working with 10.6.27.1 bootloader, or will it work?
Click to expand...
Click to collapse
@rayman Is it working with the bootloader for the latest update (10.6.1.27.5 )? Or should we downgrade to 10.6.1.15.3 to be safe?
k1chy said:
@rayman Is it working with the bootloader for the latest update (10.6.1.27.5 )? Or should we downgrade to 10.6.1.15.3 to be safe?
Click to expand...
Click to collapse
It is working in 10.6.1.27.5 bl....im on c rom
i have a question....what files should i save?
the files that was generated only have 11mb...normal?
once i get the files can a reflash the twrp recovery?
if i brick my tablet what should i do with this files?
tks in advance
This is really exciting! Thanks devs!
Just to confirm and clarify (for noobs not unlike myself), this does work with the 4.2 BL (Rom example being CM 4.3 nightlies).
So I'm a bit confused. This process involved installing a new recovery image. If my device already has TWRP custom recovery and CM10.1 nightly, would I just follow all the steps listed and then reinstall TWRP as a final step? I was concerned with the steps that involved rebooting the device and wasn't sure how that recovery image would handle CM10.1
OK I just did it and I got a 1.6 MB blob file...I did the wheelie and it worked but where were the files: Unlocked token, factory config, and bricksafe img files received too? They were not in the nvflash directory nor on the device, but it said all three of them had been received succesfully.
Edit:
Found them. Located at: User\AppData\Local\VirtualStore
All three were there
Another Edit:
Spinergy02 said:
So I'm a bit confused. This process involved installing a new recovery image. If my device already has TWRP custom recovery and CM10.1 nightly, would I just follow all the steps listed and then reinstall TWRP as a final step? I was concerned with the steps that involved rebooting the device and wasn't sure how that recovery image would handle CM10.1
Click to expand...
Click to collapse
I'd like to know this too. I think we can reinstall TWRP -42 at the end, but I'd like some confirmation by someone more knowledgeable than myself.
Wheelie on Mac OS X
Anyone test wheelie or nvflash on OSX 10.8.5 ? Wheelie for me not work.
riderskull said:
Anyone test wheelie or nvflash on OSX 10.8.5 ? Wheelie for me not work.
Click to expand...
Click to collapse
what part doesnt work? running any of the commands or something specific like drivers
Sent from my TF300T using xda app-developers app
cmendonc2 said:
what part doesnt work? running any of the commands or something specific like drivers
Sent from my TF300T using xda app-developers app
Click to expand...
Click to collapse
when i execute command
Code:
wheelie --blob blob.bin
the output is
Code:
-bash: /Users/myfolder/wheelie: cannot execute binary file
Any solution ?
riderskull said:
when i execute command
Code:
wheelie --blob blob.bin
the output is
Code:
-bash: /Users/myfolder/wheelie: cannot execute binary file
Any solution ?
Click to expand...
Click to collapse
Use chmod or run it under sudo for Linux? Idk how Mac works
Sent from my TF300T using xda app-developers app
Sure do wish OP would come back and answer some of the previous questions about useability...
riderskull said:
Anyone test wheelie or nvflash on OSX 10.8.5 ? Wheelie for me not work.
Click to expand...
Click to collapse
OS X is not currently supported. We do actually have a wheelie port for OS X, but we haven't been able to find a sufficiently new nvflash binary for OS X, so there's little point in releasing it. You must use windows or linux.
Spinergy02 said:
So I'm a bit confused. This process involved installing a new recovery image. If my device already has TWRP custom recovery and CM10.1 nightly, would I just follow all the steps listed and then reinstall TWRP as a final step? I was concerned with the steps that involved rebooting the device and wasn't sure how that recovery image would handle CM10.1
Click to expand...
Click to collapse
Yes, you can install whatever recovery you want after getting your blobs.
You are also free to install whatever bootloader you want afterwards.
The recovery is essentially CWM with some extras, so it should flash any CWM flashable rom without issue.
hgoldner said:
So, having read the guide thoroughly, if already on the JB bootloader (10.4.20.0), is it necessary to update to the latest firmwares before running this or can I do it on 10.4.20.0? I note that the guide references bootloader 10.6.1.15.3. Also, anyone know whether doing the NVFlash thing wipes the user data?
Thanks in advance. Looking forward to running this on my TF300T once I get my ducks in line.
Click to expand...
Click to collapse
It works on all currently released bootloaders. If we hear of asus fixing it in a new bootloader, we will put a latest bootloader supported notice on the guide on the website.
Only unlocking the device wipes the user data. Doing the NVFlash thing doesn't wipe anything.
i am stuck at: Step 2: Generate wheelie blobs
its say that it genrateted the files and uploaded them but when i try the adb pull it cannot find the files. I tried both commands the /date one and the /tmp one. Also when i look a root browser app i cannot find the map.
Help pls :S
You can revert to 4.0 firmware via nvflash?