I got the Fire TV box a month ago and it has worked intermittently since. The first 1-2 weeks it worked fine but since it keeps coming up with the message "network connection lost" when first starting the box. The remote doesn't work and so I can't even get to the settings. The box just freezes at this point and I can't dismiss the warning without a remote.
I've tried restarting the box multiple times and also the router. Its connected via wireless and there's no possibility for ethernet connection as the router is far away from the TV. All other wifi's work fine eg on laptop, smart TV and mobiles.
I thought I had a dodgy box so had this replaced yesterday and although it worked then today its back to the same problem.
Connected to Samsung TV via HDMI cable. Have tried different ports and a new HDMI cable.
Router settings:
Virgin Suberhub - speed around 40mbps
WPA
11b+11g+11n
Channel 1
Any ideas what the problem and solution can be? Do I have to get a usb keyboard to be able navigate to the settings page and reset the box / wireless connection.
Hi folks,
I've got my Xiaomi Mi 9 SE (Global Version) two weeks ago, and I'm very happy with it. There is only one problem:
I can't share my Data Connection via Bluetooth! ..
Neither with my car and its bluetooth speakerphone, nor with my Smartwatch, I can't get managed to share the connection.
So the Bluetooth connection itself is up and running without any problems! Only the data connection is not shared. The car shows me no signal (general network), and the SmartWatch does not get a connection to the Internet.
I looked up the Tutorial here in the old en.miui-Thread but I don't get the "Enable Internet Access"-Button in the paired Device Menu (part#6/7 in the Tutorial). I've activated the Bluetooth Tethering mentioned in part#5..
Is there any other way to share my Smartphone Connection via Bluetooth to paired Devices?
I've re-paired the devices multiple times. I also have done a factory Reset with Phone and SmartWatch. The problem occured with original Global Rom, and still occures with latest xiaomi.EU Rom.
Hope you can help me..
Best Regards
Some news: Occasionally it works. Sometimes I can access the Internet with my Smartwatch, which is connected to my smartphone via Bluetooth. But really rather rarely. And even without me changing anything. I don't even touch the smartphone yet, and suddenly I have Internet access on the Smartwatch, 2 minutes later but then again no more. Damn weird.
EDIT: Solved it! You have to set every Priority for the Wear OS Notifications in the App Manager to "High" and allow everything for this App.. Now I have continous Data Connection via my SmartWatch, Problems are gone
Hi,
I have issues connecting my Galaxy Watch Active 2 to my new OnePlus 7T.
The initial setup and connection works flawlessly but after longer periods with no connection (I switch of bluetooth over night) the phone does not reestablish the connection with the watch.
Even if I open the Samsung companion app on the phone and try to manually connect I get an error message "Couldn't connect to watch..."
Toggling bluetooth has no effect, neither has a phone reboot.
With my Oneplus 6T everything worked like a charm so I don't expect the issue with the watch but rather with the phone.
Any ideas on this?
HI,
It seems your Galaxy Watch refuse to reestablish the connection.
Maybe the watch has connected to another phone. Have you paired it with another phone ?
Hello guys how are you?
Recently I bought a Dasaita PX6 Android 10 for my Toyota CHR. Camera working OK, Sound OK... but I have a problem with WIFI connection.
As soon as setup my phone as hotspot, I search that WIFI on DASAITA. I find it and connect to it but as soon as IP address is raised WIFI turns off automatically.
Here I show you a video of the problem:
youtube.com/watch?v=akjF7q0NvJc&feature=youtu.be&spm=a2g0s.imconversation.0.0.560b3e5f2rShbE
Thanks
I had the same issue. I think it has to do with the Zlink app which tries to put the HA in hotspot mode. I managed to switch on wifi after closing the Zlink app manually and disabling the hotspot in the dropdown menu(the icons which appear if you swipe down from the top of the screen). Unfortunately the wifi connection with the hotspot of my iPhone is nog always stable. Sometimes it disconnects after a couple of minutes.
SYoung said:
I had the same issue. I think it has to do with the Zlink app which tries to put the HA in hotspot mode. I managed to switch on wifi after closing the Zlink app manually and disabling the hotspot in the dropdown menu(the icons which appear if you swipe down from the top of the screen). Unfortunately the wifi connection with the hotspot of my iPhone is nog always stable. Sometimes it disconnects after a couple of minutes.
Click to expand...
Click to collapse
Thanks for your reply.
If you saw the video I linked I have closed all apps and the problem is still there. I don't know what happens
CyrusMzRG said:
Thanks for your reply.
If you saw the video I linked I have closed all apps and the problem is still there. I don't know what happens
Click to expand...
Click to collapse
Yes, a saw that, but as far as I can see, you did not disable the hotspot before turning on wifi. I needed to do that as well.
SYoung said:
Yes, a saw that, but as far as I can see, you did not disable the hotspot before turning on wifi. I needed to do that as well.
Click to expand...
Click to collapse
I think as soon as wifi is set to ON, hotspot turns off automatically. It can be shown also on the video.
Actually I use CAR PLAY but I would like to swap between both options with no connection problems :crying:
I thought my suggested method worked, but today it did not work for me either. I agree with you that this is quite annoying. Hopefully someone else can help us out.
i have same issue... looking forward to somebody do a stable update that solve this problem
I have this unit. What works for me is to use usb hookup for CarPlay, then you can use phone hotspot on radios WiFi. You have to turn WiFi on a few times after connecting phone through usb for it to stick. For wireless CarPlay, the radio uses the WiFi resources and turns off selectable WiFi.
Sent from my iPad using Tapatalk
the problem for me is that my iphone is not connect well to the bluetooth of the Dasaita, the issue is that i can't answer or make a call through the Dasaita (android)..... When i'm able to connect to BT and the Zlink start then the BT disconnects, when switch shut down Zlink app BT won't connect anymore
CyrusMzRG said:
I think as soon as wifi is set to ON, hotspot turns off automatically. It can be shown also on the video.
Actually I use CAR PLAY but I would like to swap between both options with no connection problems :crying:
Click to expand...
Click to collapse
I think Syoung (above) is correct.
Obviously you can't run hotspot and wifi at the same time. It's one or the other.
If watch the video closely, the hotspot is off. As soon as wifi is turned on and the phone connects SOMETHING turns the hotspot on (you can see it getting turned on at the 19 second mark in the video), which in turn shuts off the wifi.
Maybe try completely disabling hotspot and see what happens
Well. I tried to connect the iPhone to the car via USB cable to launch CARPLAY. I think my car USB port that actually y also connected to DAISATA doesn’t support CARPLAY. Maybe I need to connect another cable to the back of DASAITA module to make it work.
In addition about the HOTSPOT. The DAISATA HOTSPOT is automatically set to ON to link with iPhone CarPlay.
If I turn it off as soon as my iPhone is near (also set use with CarPlay) hotspot back to ON and CARPLAY IS LINKED AND LAUNCHED.
Do you know if I need to use another cable connected to usb connector located in the back of DAISATA??
Thanks
Hello again. This is what I did and noticed:
- Car usb socket (connected to Daisata) doesn't work with USB CARPLAY.
- I connect the extra usb port to DAISATA.
- CARPLAY via USB working OK on that port.
- If using WIRELESS CARPLAY, Dasaita acts as hotspot creating a WIFI network where iPhone connects automatically.
- Now... I connect the iPhone to the new USB port for CARPLAY ( working ok and connecting faster). I disabled Hotspot from DASAITA. I turned ON WIFI and connect Dasaita to my iPhone hotspot . ALL OK.
So as somebody said is not possible use WIRELESS CAR PLAY and also have WIFI on Dasaita software.
I think connecting the iPhone to the new port we have the 2 connections ( car play and wifi) and on the other hand we can recharge the iPhone.
BUT.... now I need to solve another problem. I don't know why I need to switch off the Hotspot on iPhone each time I want The Daisata connects to the iPhone Hotspot. If I leave the hotspot always ON ( as it MUST BE) the wIFI that iPhone creates doesn't appear on DAISATA. As soon as I switch OFF then ON DAISATA connects in 1 sec to my iPhone
Best regards
CyrusMzRG said:
Hello again. This is what I did and noticed:
- Car usb socket (connected to Daisata) doesn't work with USB CARPLAY.
- I connect the extra usb port to DAISATA.
- CARPLAY via USB working OK on that port.
- If using WIRELESS CARPLAY, Dasaita acts as hotspot creating a WIFI network where iPhone connects automatically.
- Now... I connect the iPhone to the new USB port for CARPLAY ( working ok and connecting faster). I disabled Hotspot from DASAITA. I turned ON WIFI and connect Dasaita to my iPhone hotspot . ALL OK.
So as somebody said is not possible use WIRELESS CAR PLAY and also have WIFI on Dasaita software.
I think connecting the iPhone to the new port we have the 2 connections ( car play and wifi) and on the other hand we can recharge the iPhone.
BUT.... now I need to solve another problem. I don't know why I need to switch off the Hotspot on iPhone each time I want The Daisata connects to the iPhone Hotspot. If I leave the hotspot always ON ( as it MUST BE) the wIFI that iPhone creates doesn't appear on DAISATA. As soon as I switch OFF then ON DAISATA connects in 1 sec to my iPhone
Best regards
Click to expand...
Click to collapse
I went into the zlink app preferences and turned off autoload and control system settings. This seems to stop zlink from turning everything back on when you turn it off. Been working for a few days. I do not however use android auto. You would need to play with the app to see how it functions without those permissions.
Hello,
I couldn't make the switch to wifi on. It kept going off. Tried your help, nothing worked.
What helped me today was a complete "power off". A restart.
It's working now.
Hi, I have a Dasaita PX6 with Max10, I have same issue, i have an iPhone 13 Pro Max, I don't know what to do, I can't solve, could you help me? Thank you in advance
I had a similar issue. I recently purchased a Dasaita HD5367-H10 unit and I've been having some trouble with the WiFi.
When the unit turns on, the WiFi turns on and it connects to my phone's hotspot. Shortly after it connects, the WiFi turns off and I have to manually turn it on again. This only happens once upon boot up and it works fine for the rest of the duration. Once I restart the unit, the issue occurs again.
I think I found a workaround. Disabling ZLink from the Factory Settings menu seems to "fix" the problem, but now the ZLink daemon service is not working.
I got my S22 a couple of days ago. Previously, I had a Pixel 5. I bought a Motorola MA1 dongle to use Wireless AA on my car. It worked perfectly with my Pixel 5.
I setup my S22, and while it does connect to the dongle and recognize it as Wireless AA and all, it drops the WiFi connection after a few seconds with a "WiFi Disconnected" toast message near the lower part of the screen. It then repeats the process indefinitely: Connects to the dongle's WiFi, stays for about 5 seconds, drops with WiFi Disconnected message, reconnects to the WiFi...
At first I thought it might be realizing the WiFi connection does not provide any internet, which is right, and switches to mobile due to the "Switch to mobile" option. So I turned that off. Still, same message and no connection.
I've tried setting it up several times but it's always the same error. FYI it works correctly with USB-C wire.
Anyone got any ideas how I could solve this? Maybe some kind of developer network setting to hold on to the WiFi connection a bit longer or something?
Thanks!
Factory reset the MA1. I had a similar issue after migrating from the S10 to the S22 that was only cleared up by resetting the dongle. I'm thinking it's more of an MA1 issue than an S22 issue.
Tacoo said:
Factory reset the MA1. I had a similar issue after migrating from the S10 to the S22 that was only cleared up by resetting the dongle. I'm thinking it's more of an MA1 issue than an S22 issue.
Click to expand...
Click to collapse
That's through the process of holding the side button for 45 seconds, right? Sadly, I've already done it. No luck...
Solved! Following a reddit comment advice, I factory reset Mazda's infotainment system, as well as the MA1 dongle, and deleted both Mazda's and the MA1 pairings in bluetooth on the cellphone .
Then, did the whole setup again. Error persisted. Connected via wired and was able to establish wired AA connection. Disconnected and tried the dongle again. IT WORKED!
Thanks Tacoo (As a Mexican, I like your username) for your assistance!