I got my S22 a couple of days ago. Previously, I had a Pixel 5. I bought a Motorola MA1 dongle to use Wireless AA on my car. It worked perfectly with my Pixel 5.
I setup my S22, and while it does connect to the dongle and recognize it as Wireless AA and all, it drops the WiFi connection after a few seconds with a "WiFi Disconnected" toast message near the lower part of the screen. It then repeats the process indefinitely: Connects to the dongle's WiFi, stays for about 5 seconds, drops with WiFi Disconnected message, reconnects to the WiFi...
At first I thought it might be realizing the WiFi connection does not provide any internet, which is right, and switches to mobile due to the "Switch to mobile" option. So I turned that off. Still, same message and no connection.
I've tried setting it up several times but it's always the same error. FYI it works correctly with USB-C wire.
Anyone got any ideas how I could solve this? Maybe some kind of developer network setting to hold on to the WiFi connection a bit longer or something?
Thanks!
Factory reset the MA1. I had a similar issue after migrating from the S10 to the S22 that was only cleared up by resetting the dongle. I'm thinking it's more of an MA1 issue than an S22 issue.
Tacoo said:
Factory reset the MA1. I had a similar issue after migrating from the S10 to the S22 that was only cleared up by resetting the dongle. I'm thinking it's more of an MA1 issue than an S22 issue.
Click to expand...
Click to collapse
That's through the process of holding the side button for 45 seconds, right? Sadly, I've already done it. No luck...
Solved! Following a reddit comment advice, I factory reset Mazda's infotainment system, as well as the MA1 dongle, and deleted both Mazda's and the MA1 pairings in bluetooth on the cellphone .
Then, did the whole setup again. Error persisted. Connected via wired and was able to establish wired AA connection. Disconnected and tried the dongle again. IT WORKED!
Thanks Tacoo (As a Mexican, I like your username) for your assistance!
Related
Hi friends,
I have a terrible problem with my fine TouchPro2.
It constantly loses the wifi-connection. My old TouchPro1 never had these issues.
I have the actual HTC stockROM installed. Tried WiFiMonster - but again. After a few seconds it loses the connection.
Sometimes I'm able to download three, four mails, but then it breaks again :-(
Any idea?
re
To be more specific: WiFi goes off after 30 sec. or so. :-(
does wifi turn off? or simply disconnect? if it's disconnecting, first thing i'd do is reboot my router with wifi enabled on the phone and see if the connection improves. if wifi is physically turning off i'd guess it's an issue in the rom. maybe try another rom? and make sure wifi is set to "best performance" on phone.
Is this everywhere or on a specific router?
Does your connection drop after a certain activity (e.g. screen going into standby, opening a specific program, etc.)? Also, have you tried to backup your device and perform a hard reset?
Similar Problems
I've been having similar problems for about two weeks now.
I have tried several things like hard reset, soft reset, changing the rom, playing with the wireless connection and just about everything in the connection folder but no.
I my case, when I turn the wifi connection on through the comm. manager, it slows down the phone while its trying to connect and then it just goes off, leaving me with t-mo data connection. However, when I turn off data connections in comm. manager, it connects to the router and stays connected but it does nothing with the connection. Meaning, I am connected to the router, but somehow I won't be able to use the connections.
If anyone have any suggestion(s), I would greatly appreciated it.
solved...
Thx guys,
I performed a Hardreset and testet one by one the installed software... and found it: I installed a CommManager and it caused the WiFi-Problem :-(
thx
biddle said:
I my case, when I turn the wifi connection on through the comm. manager, it slows down the phone while its trying to connect and then it just goes off, leaving me with t-mo data connection.
Click to expand...
Click to collapse
What do you mean "slows down the phone"?
biddle said:
However, when I turn off data connections in comm. manager, it connects to the router and stays connected but it does nothing with the connection. Meaning, I am connected to the router, but somehow I won't be able to use the connections.
Click to expand...
Click to collapse
If your wifi connects but you cant get out, check to make sure you don't have the proxy box checked in connection settings. I have seen this box mysteriously become checked in the past.
Just a little comment
I will be getting TP2 very soon, but speaking of WiFi problems in general..
I had 3 phone: TyTN II, Samsung Omnia & iPhone 3g. only the TyTN could connect to WiFi at home while the other two can connect but will not get any data... however, they worked flawlessly in numerous other locations...
the problem was with my linksys router
apparently some older routers not compatible with the newer devices...
just wanted to share
Ok. As of today, it seems to be working, thanks for the help. However, I think it might have been my router. I think it had something to do with overheating because I put my modem on top of it. But the funny part was, everything, with the exception of my phone, was connecting. However, the connection was never really strong or reliable.
Anywho, thanks for the suggestion, even though it didnt really help me, I appreciate the gesture.
I have a program called Dijit that uses bluetooth to control TV's, Cable boxes, etc.. I had a Motorola Atrix and it worked just fine with it. I just got the S3 and it keeps losing connection. I have to keep clicking on connect and eventually it will ask for my PIN again and finally it will connect. Anyone have any ideas on this? I have deleted the pairing a few times but hasn't worked.
Hi, I've tried all the troubleshooting steps on how to fix wifi connection but it seems there's no luck.
I've already change the firmware but still no connection.
The problem is, I can connect to a wifi but it has no connection. It will only "saved,secured" and that's all.
Anyone can help?
Same issue here.
I'm starting to think that the eletronics trash can is the solution...
My Samsung Galaxy T-520 detects all Wi-Fi networks, but it doesn't connect to any. The status shows "saved, secured", but it fails to connect. I tried everything, switching on/off passpoints, bluetooth and whatever, even factory resets (twice). I also tried to start the device without the Google account, skipping everything. I also tried a cell phone access point, it's all useless. All my other devices work, so it's not the router. Maybe it's a hardware problem. It suddenly stopped working
Hi all,
I've encountered a strange and annoying problem with my H/U. Unit is a PX3 based Hizpo 6.2" Running 7.1.2
My problem is, when I turn on hotspot manually on my phone, the H/U happily auto connects and internets is available for spotify etc etc.
But, when I use an app (Hotspot start, Carspot ready, Car Automatic, or even made a flow in Automate) to automatically turn on my phone's hotspot when the bluetooth connection has been made, my H/U will not connect, it gets stuck at 'Obtaining IP address'.
I've tried lots of things but no joy.
Please help, thanks!
There was a change made to the Android system which stopped apps from enabling services. wifi is a service and can no longer be started by apps. I ran into the same issue a while back. It was all working perfectly for a while then an update borked it.
jks8496956 said:
Hi all,
I've encountered a strange and annoying problem with my H/U. Unit is a PX3 based Hizpo 6.2" Running 7.1.2
My problem is, when I turn on hotspot manually on my phone, the H/U happily auto connects and internets is available for spotify etc etc.
But, when I use an app (Hotspot start, Carspot ready, Car Automatic, or even made a flow in Automate) to automatically turn on my phone's hotspot when the bluetooth connection has been made, my H/U will not connect, it gets stuck at 'Obtaining IP address'.
I've tried lots of things but no joy.
Please help, thanks!
Click to expand...
Click to collapse
I got same issue I tried doing factory reset 2 times then it’s started working for 5 day then again same issue
I had the same problem and I solved it by disabling screen lock and using Tasker with secure settings and toucktask to simulate manual hotspot activation.
Hello guys how are you?
Recently I bought a Dasaita PX6 Android 10 for my Toyota CHR. Camera working OK, Sound OK... but I have a problem with WIFI connection.
As soon as setup my phone as hotspot, I search that WIFI on DASAITA. I find it and connect to it but as soon as IP address is raised WIFI turns off automatically.
Here I show you a video of the problem:
youtube.com/watch?v=akjF7q0NvJc&feature=youtu.be&spm=a2g0s.imconversation.0.0.560b3e5f2rShbE
Thanks
I had the same issue. I think it has to do with the Zlink app which tries to put the HA in hotspot mode. I managed to switch on wifi after closing the Zlink app manually and disabling the hotspot in the dropdown menu(the icons which appear if you swipe down from the top of the screen). Unfortunately the wifi connection with the hotspot of my iPhone is nog always stable. Sometimes it disconnects after a couple of minutes.
SYoung said:
I had the same issue. I think it has to do with the Zlink app which tries to put the HA in hotspot mode. I managed to switch on wifi after closing the Zlink app manually and disabling the hotspot in the dropdown menu(the icons which appear if you swipe down from the top of the screen). Unfortunately the wifi connection with the hotspot of my iPhone is nog always stable. Sometimes it disconnects after a couple of minutes.
Click to expand...
Click to collapse
Thanks for your reply.
If you saw the video I linked I have closed all apps and the problem is still there. I don't know what happens
CyrusMzRG said:
Thanks for your reply.
If you saw the video I linked I have closed all apps and the problem is still there. I don't know what happens
Click to expand...
Click to collapse
Yes, a saw that, but as far as I can see, you did not disable the hotspot before turning on wifi. I needed to do that as well.
SYoung said:
Yes, a saw that, but as far as I can see, you did not disable the hotspot before turning on wifi. I needed to do that as well.
Click to expand...
Click to collapse
I think as soon as wifi is set to ON, hotspot turns off automatically. It can be shown also on the video.
Actually I use CAR PLAY but I would like to swap between both options with no connection problems :crying:
I thought my suggested method worked, but today it did not work for me either. I agree with you that this is quite annoying. Hopefully someone else can help us out.
i have same issue... looking forward to somebody do a stable update that solve this problem
I have this unit. What works for me is to use usb hookup for CarPlay, then you can use phone hotspot on radios WiFi. You have to turn WiFi on a few times after connecting phone through usb for it to stick. For wireless CarPlay, the radio uses the WiFi resources and turns off selectable WiFi.
Sent from my iPad using Tapatalk
the problem for me is that my iphone is not connect well to the bluetooth of the Dasaita, the issue is that i can't answer or make a call through the Dasaita (android)..... When i'm able to connect to BT and the Zlink start then the BT disconnects, when switch shut down Zlink app BT won't connect anymore
CyrusMzRG said:
I think as soon as wifi is set to ON, hotspot turns off automatically. It can be shown also on the video.
Actually I use CAR PLAY but I would like to swap between both options with no connection problems :crying:
Click to expand...
Click to collapse
I think Syoung (above) is correct.
Obviously you can't run hotspot and wifi at the same time. It's one or the other.
If watch the video closely, the hotspot is off. As soon as wifi is turned on and the phone connects SOMETHING turns the hotspot on (you can see it getting turned on at the 19 second mark in the video), which in turn shuts off the wifi.
Maybe try completely disabling hotspot and see what happens
Well. I tried to connect the iPhone to the car via USB cable to launch CARPLAY. I think my car USB port that actually y also connected to DAISATA doesn’t support CARPLAY. Maybe I need to connect another cable to the back of DASAITA module to make it work.
In addition about the HOTSPOT. The DAISATA HOTSPOT is automatically set to ON to link with iPhone CarPlay.
If I turn it off as soon as my iPhone is near (also set use with CarPlay) hotspot back to ON and CARPLAY IS LINKED AND LAUNCHED.
Do you know if I need to use another cable connected to usb connector located in the back of DAISATA??
Thanks
Hello again. This is what I did and noticed:
- Car usb socket (connected to Daisata) doesn't work with USB CARPLAY.
- I connect the extra usb port to DAISATA.
- CARPLAY via USB working OK on that port.
- If using WIRELESS CARPLAY, Dasaita acts as hotspot creating a WIFI network where iPhone connects automatically.
- Now... I connect the iPhone to the new USB port for CARPLAY ( working ok and connecting faster). I disabled Hotspot from DASAITA. I turned ON WIFI and connect Dasaita to my iPhone hotspot . ALL OK.
So as somebody said is not possible use WIRELESS CAR PLAY and also have WIFI on Dasaita software.
I think connecting the iPhone to the new port we have the 2 connections ( car play and wifi) and on the other hand we can recharge the iPhone.
BUT.... now I need to solve another problem. I don't know why I need to switch off the Hotspot on iPhone each time I want The Daisata connects to the iPhone Hotspot. If I leave the hotspot always ON ( as it MUST BE) the wIFI that iPhone creates doesn't appear on DAISATA. As soon as I switch OFF then ON DAISATA connects in 1 sec to my iPhone
Best regards
CyrusMzRG said:
Hello again. This is what I did and noticed:
- Car usb socket (connected to Daisata) doesn't work with USB CARPLAY.
- I connect the extra usb port to DAISATA.
- CARPLAY via USB working OK on that port.
- If using WIRELESS CARPLAY, Dasaita acts as hotspot creating a WIFI network where iPhone connects automatically.
- Now... I connect the iPhone to the new USB port for CARPLAY ( working ok and connecting faster). I disabled Hotspot from DASAITA. I turned ON WIFI and connect Dasaita to my iPhone hotspot . ALL OK.
So as somebody said is not possible use WIRELESS CAR PLAY and also have WIFI on Dasaita software.
I think connecting the iPhone to the new port we have the 2 connections ( car play and wifi) and on the other hand we can recharge the iPhone.
BUT.... now I need to solve another problem. I don't know why I need to switch off the Hotspot on iPhone each time I want The Daisata connects to the iPhone Hotspot. If I leave the hotspot always ON ( as it MUST BE) the wIFI that iPhone creates doesn't appear on DAISATA. As soon as I switch OFF then ON DAISATA connects in 1 sec to my iPhone
Best regards
Click to expand...
Click to collapse
I went into the zlink app preferences and turned off autoload and control system settings. This seems to stop zlink from turning everything back on when you turn it off. Been working for a few days. I do not however use android auto. You would need to play with the app to see how it functions without those permissions.
Hello,
I couldn't make the switch to wifi on. It kept going off. Tried your help, nothing worked.
What helped me today was a complete "power off". A restart.
It's working now.
Hi, I have a Dasaita PX6 with Max10, I have same issue, i have an iPhone 13 Pro Max, I don't know what to do, I can't solve, could you help me? Thank you in advance
I had a similar issue. I recently purchased a Dasaita HD5367-H10 unit and I've been having some trouble with the WiFi.
When the unit turns on, the WiFi turns on and it connects to my phone's hotspot. Shortly after it connects, the WiFi turns off and I have to manually turn it on again. This only happens once upon boot up and it works fine for the rest of the duration. Once I restart the unit, the issue occurs again.
I think I found a workaround. Disabling ZLink from the Factory Settings menu seems to "fix" the problem, but now the ZLink daemon service is not working.