My CM10 build for the Samsung Galaxy Tab 7" P1000/N/L/ (CDMA? testers?).
Based on the SGT7 repo (cdesai, sbradymobile and humberos).
Here is @cdesai's original thread.
Alroger's downloads (info, tips and troubleshooting included)
Humberos's downloads (you can use my PDroid Patches with them).
You can use the boot.img kernels inside the ZIPs to test other MTD builds like the official CyanogenMod and AOKP, which often don't offer latin kernels, as long as they have the same partition layout. Don't use the latest kernel on nightlies BEFORE 20120923!
UPDATE: 20121127 available. @humberos' kernel. Little UI updates, BT and Sensor fixes. EXIF Fix for Geotagging photos (works with Ingress now)!
UPDATE: 20121120 available. @humberos' kernel. kernel tweaks, sbradymobile updates, LED brightness, clear recent apps button.
UPDATE: 20121113 available. @humberos' kernel. Memory fix, video fix, wifi fix, 1.4GHz OC.
UPDATE: 20121111 available. @humberos' kernel. Little things. Voodoo Sound is back.
UPDATE: 20121108 available. @humberos' kernel. Performance, battery and wireless fixes, including infamous ksoftirqd/0. Brazilian DST fixes.
UPDATE: 20121104 @humberos test kernel available for flashing. VPN works! Even mppe encrypted!
UPDATE: 20121104 available. @humberos' kernel, little fixes and updates.
UPDATE: 20121031 available. @humberos' kernel, little fixes, translations... you tell me.
UPDATE: 20121024 available. @humberos' kernel, @sbradymobile tweaks: 1-Touch USB Mount!
UPDATE: 20121023 available. @humberos' kernel, Loads of updates (4.1.2), GPU OC using Antutu, @sbradymobile tweaks, etc.
UPDATE: 20121015 PDroid Patch for latest CM10 Android 4.1.2 available.
UPDATE: 20121009 available. @humberos' kernel. Little fixes?
UPDATE: 20121007 available. @humberos' kernel. better battery? more Trebuchet tweaks by @sbradymobile and misc translations.
UPDATE: 20121005 @humberos kernel available for flashing. No more unwanted Wifi sleep. USB driver fixes?
UPDATE: 20121001 available. @humberos‘ kernel, better memory management, less reboots, more Trebuchet tweaks by @sbradymobile.
UPDATE: 20120927b @humberos kernel. Want speed? Flash this and let us know.
UPDATE: 20120927 available. @humberos‘ kernel improvements, @sbradymobile tweaks, fullscreen auto-hide bar?
UPDATE: 20120925b @humberos kernel Fixed Wifi MAC!
UPDATE: 20120925 @humberos kernel available for flashing. Memory management fixes. Try zRAM to fix reboots!
UPDATE: 20120923 available. @humberos kernel, New New Partition Layout, big /data again. All data will be lost again!
UPDATE: 20120921 available. @humberos kernel, zRAM working through system configuration and zCACHE updates.
UPDATE: 20120920 available. @humberos kernel, pdroid, new partition layout, better memory management, zRAM and zCACHE, USB Fast Charge.
UPDATE: 20120919 available. @humberos kernel, pdroid, new partition layout, better memory management.
UPDATE: 20120915 @humberos kernel available for flashing. Faster Wifi and Swap available for testing.
UPDATE: 20120914 available. @cdesai kernel, pdroid, new partition layout, HW video and Camera fixed! Tablet Mode in System/Status Bar!
UPDATE: 20120910 New PDroid Patch available for @humberos and nightly builds with new partition layout.
UPDATE: 20120903 available. @humberos kernel, tweaks and PDroid. No partition changes yet.
PDroid Patches included and available separately as CwM Flash install.
NoMoarPowah! GalaxyTab stockblue theme available.
OBS: No need to restock.
Easy restock from Gingerbread:
Flash full stock Gingerbread (with repartition).
Flash Kernel with CwM. Doesn't have to be Overcome, could be any CF-root kernel for your model.
Boot directly into CwM Recovery, holding VolUp.
Flash CM10 ROM and GApps!
Cheers! Thanks everyone!
==[SCREENSHOTS ro.sf.lcd_density=120]==
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Building CM10 successful.
[UPDATE 20121113] Back to userdebug instead of eng.
Android 4.1.2 compiling now.. New PDroid patches for 4.1.2 working.
Plugin your device via USB (ADB enabled) for the extract-files part!
Code:
mkdir ~/cm10
cd ~/cm10
repo init -u git://github.com/sgt7/android.git -b jellybean
repo sync
cd vendor/cm
./get-prebuilts
cd ../..
source build/envsetup.sh
lunch cm_p1n-userdebug
cd device/samsung/p1
./extract-files.sh
cd ../../..
time make -j6 bacon
# cm_p1n-userdebug, cm_p1l-userdebug or cm_p1c-userdebug for CDMA
# -j6 for 2 threads per core (3 cores here)
Using the following right now, in .repo/local_manifest.xml, to get all humberos updates. extract-files takes care of the proprietary files.
Code:
<project name="humberos/android_kernel_samsung_p1" path="kernel/samsung/p1" remote="github" revision="cm-10.0.0" />
<project name="humberos/android_device_samsung_p1-common" path="device/samsung/p1-common" remote="github" revision="jellybean" />
Not needed anymore: If compiling with PDroid, gotta delete a couple files so it won't exceed the 65536 method limit:
Code:
rm frameworks/base/telephony/java/com/android/internal/telephony/{SonyQualcommRIL.java,HTCQualcommRIL.java,LGEQualcommRIL.java,LGEQualcommUiccRIL.java,MotoWrigley3GRIL.java,SemcRIL.java,Smdk4210RIL.java}
Not needed anymore.
Cheers!
BUGs, Video, Camera, etc...
BUGs? You tell me.
My build should have the same flaws as official CM nightlies, humberos and cdesai builds.
HW Video working!
Camera working!
New partition layout!
Tablet Mode!
Better memory management!
[UPDATE 20120914]
New build out with all the goodies so far...
Never seen Youtube Apps and Videos so fast, EVER on this Tab. Never seen HD videos so crisp and clear, 0 stutter with HW acceleration! MX Player was updated with new HW+ codec, which makes video, that normally wouldn't, work in HW!
[UPDATE 20120911]
@humberos 20120908 build has HW video accel and New Partition Layout! Pretty good. My PDroid Patches work fine with it.
Test videos for HW codec: http://forum.xda-developers.com/showpost.php?p=25215203&postcount=805
I use MX Player.
Reporting Bugs
Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
Please read the thread for known issues before reporting.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow.
Code:
What is your--
Tablet model:
Radio (baseband):
CM version:
CM Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
thanks alroger
Thanks Alroger, are there any bugs in this version?
Would be nice if H/W acceleration is present..720p and 1080p videos can't play smoothly. Waiting for the next release.
I tried to change screen resolution (from 160 to 240 dpi) and after that the tab refuse to start and don't go over the bootscreen. I wiped all the data and install everything and after that the tab boot normally. I think there is something wrong with different screen resolution, another guy has the same problem with humberos release (maybe the kernel?)
sleviz said:
I tried to change screen resolution (from 160 to 240 dpi) and after that the tab refuse to start and don't go over the bootscreen. I wiped all the data and install everything and after that the tab boot normally. I think there is something wrong with different screen resolution, another guy has the same problem with humberos release (maybe the kernel?)
Click to expand...
Click to collapse
I don't think it works in 240... not yet at least.
160 and 120 work fine for me.
How did you change dpi? If you used an ago, it'll just boot loop. I'm using one of the CM10 kangs and 240 dpi works well.
Blasted from my HTC Rezound (Zone23s Newtified 3.2.1)
RED ZMAN said:
How did you change dpi? If you used an ago, it'll just boot loop. I'm using one of the CM10 kangs and 240 dpi works well.
Blasted from my HTC Rezound (Zone23s Newtified 3.2.1)
Click to expand...
Click to collapse
change the value "screen destiny" in build.prop
That's how I did mine.
Blasted from my HTC Rezound (Zone23s Newtified 3.2.1)
RED ZMAN said:
That's how I did mine.
Blasted from my HTC Rezound (Zone23s Newtified 3.2.1)
Click to expand...
Click to collapse
Download from market build.prop editor its free, and find the value ro.sf.lcd_density and change it
Sent from my GT-P1000 using XDA Premium HD app
Thank you Alroger; I was waiting for your return to test JB.. No other rom gives all the goodies and pdroid patch !
It's so good; it took me the same time to flash than previously, no problem happened, all applications/data were still present.
One little thing though; on your cafe-ti page, the link to humberos blog got me on his nexus build page, which was a little confusing...
Alroger's rom is really awesome, except the known bugs, the only pity I found is the battery runs quickly after using. Hope it can be solved soon.
XenoStrat said:
Thank you Alroger...
One little thing though; on your cafe-ti page, the link to humberos blog got me on his nexus build page, which was a little confusing...
Click to expand...
Click to collapse
Well, it's a link to the blog.. and his latest post is CM10 for the Nexus.. since there is no "fixed" post for SGT7 CM10, I leave you with the whole blog, that always has something new to share.
For example, I always use it as a heimdall command line reference... just search for heimdall in there and we find the holy full restock command line with repartitioning.
bravokylee said:
Alroger's rom is really awesome, except the known bugs, the only pity I found is the battery runs quickly after using. Hope it can be solved soon.
Click to expand...
Click to collapse
I don't feel it bad on battery consumption.
Similar to the plain Hombertos build which I monitored for 48 hrs consuming 30% on low usage, mostly standby so giving up to 6/7 days on this.
Now I have 19 hrs with 15% but have been driving around and surfing with it...
Bye,
Derk
Alroger
Well As i Know, updater.sh its not updated in sgt7 repo so the builds dont boot with the new layout, you will have to copy from cyanogenmod repo into the zip to get it boot with the new repartition. I am just comparing both builds the official and mine adding to the local manifiest the following.
<project name="sgt7/android_device_samsung_p1-common" path="device/samsung/p1-common" remote="github" revision="jellybean" />
<project name="humberos/android_kernel_samsung_p1" path="kernel/samsung/p1" remote="github" revision="cm-10.0.0" />
<project name="TheMuppets/proprietary_vendor_samsung" path="vendor/samsung" remote="github" revision="jellybea
But mine is a litle laggy so i think some more things are not updated in sgt7 repo.
cheers.
Also with humberos kernel I dont get the boot animation.
Tried to flash this over the last humeros cm10 build (20120823), just reboots after about 15 seconds after installation starts in cwm.
Ideas?
Sent from my GT-P1000 using xda app-developers app
areshinakya said:
Tried to flash this over the last humeros cm10 build (20120823), just reboots after about 15 seconds after installation starts in cwm.
Ideas?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
flash, boot, flash again. and no USB connections.
Thanks.
I did not have usb connected, but power was plugged in.
After recharging and flashing without power adapter plugged in it worked!
Strange.
Sent from my GT-P1000 using xda app-developers app
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Visit the Jellybean 4.2 thread here
Banner thanks to SebianotiAs I'm sure you know, the Jellybean 4.1.1 source code was uploaded to the AOSP repos a few hours ago. Following on from my Nexus 7 port, this is a build based off of the AOSP repositories, using the open source endeavoru tree started by intrepresentation. This is a pure AOSP build, the only changes I've applied are to add the Nexus 7 boot animation, APNs, and stuff that is required to get it working.
Issues
Wireless doesn't connect for a small handful of users
Radio also doesn't work for a small number of users in recent builds
Contributing
I'm also opening up the codebase, so if you think you can contribute then submit a pull request. Anyone can contribute by helping to submit bugs to the issue tracker. Remember to include as much detail as possible. Steps to replicate, logcats etc.
If you've never tried developing for android before, then the best way to get started is to first get the source built (I'll post up a quick guide at some point), have a look through the code, read a page or two about AOSP, then see if you can pick off any bugs. Github makes it easy to find bugs, and submit your fixes back to me, so have a read up on that too if you're unfamiliar.
I've set up a short guide that should help you get started with building android, check it out here.
I've also set up #tg-endeavoru on Freenode irc for discussion, suggestions, development etc.
Links
Latest builds
Jellybean Gapps
Source
Mirrors:
http://tom.gascoigne.me/jellybean - My own primary mirror
http://cktouch.com/xda/ - Thanks MashineGun
http://vietlinks.vn/hox/jb/ - Thanks MicMeo
http://home.rutten.me/Downloads/?dir=OneX/AOSP - Thanks Nakebod
Guide to installing - Thanks Chilling_Silence
Repacked kernels
Changelogs
Build #36
Merge in latest JZO54K (Android 4.1.2_r1) changes
Please flash this boot.img instead, and let us know if it resolves the screen flickering issue: http://www.blinkenlights.ch/static/a...35/boot_35.img
It may take a day or two to take full effect
Build #35
Backport screen flickering fix into kernel (pab)
Improve stability of pollyd, the incall volume fix (pab)
Build #34
Merge latest JRO03R (Android 4.1.1_r6) changes
Build #33 (boot.img updated)
Button backlights fixed
A2DP pairing fixed (TeamNDVRu)
Multitouch gaming fixed (TeamNDVRu)
Better screen off power management (pab)
Pinyin Chinese input fixed (Properly this time) (Myself, Lord Clockan, AOSP)
Lockscreen widget alignment in lower DPI settings fixed (Properly this time)
Incoming call widget alignment in lower DPI settings fixed
Build #32
Fix lockscreen unlock widget alignment under lower DPIs
Fix Google Chinese Input
Fix AGPS - GPS now locks a lot quicker
Build #31
Merge latest JRO03L (Android 4.1.1_r4) changes
Update prebuilt binaries to 2.17 release
Fix for slow USB Mass Storage transfer rates (seader @ github, kaltkaffe @ Cyanogenmod)
Add potentially performance improving compile time flags
Build #30 (boot.img updated)
Merged latest JRO03H (Android 4.1.1_r3) changes
Wifi Hotspot fixed (Lord Clockan, tbalden)
pollyd no longer survives airplane mode, sets initial call volume correctly (pab)
Switch the build server to using 'squisher' (optimizes zip file output)
Add custom power HAL to control cpu frequencies better (mdeejay)
Build #29 (boot.img updated)
Update kernel + modules to 1.29.401.7
Update prebuilt binaries to 1.29.401.11
Enhanced in call noise suppression (Mike Grissom, Cyanogenmod)
Finished pollyd, in call volume now working correctly (pab)
Kernel crash when placing a call with headset is now resolved
Replace Superuser with SuperSU
Build #28
Phone: In call echo fixed (Mostly, there's still a faint echo, but very manageable)
Build #27
Framework: Fixed Unity games touch input (Without patching kernel - You're safe to flash whatever custom kernel you want without breaking stuff)
Radio: Some experimental stuff that may improve signal, or fix radio for those with issues
Experimental fix for this issue
Build #26
Camera: Added support for up to 8MP
Fixed front facing camera
Fixed video recording format
Radio: Corrected network status indicator
Vendor: Added Stk package
Signatures
Sebianoti (who also designed the awesome banner at the top) has been kind enough to make us an image to put in our signatures.
URL: http://i.imgur.com/mPX3k.png
More here and here
Thanks to..
pabx, rogro82, and chris-p - These guys are far more knowledgeable than I and have been incredible. Send some love their way.
Lord Clockan
tbalden
richardtrip
more2come
BMutsaards for pointing us to the working gapps, and helping to debug/test
MashineGun, entropin, and everyone else in IRC who's been helping to debug and find solutions
Everyone who contributed to intrepresentation's Cyanogenmod tree
Everyone who's tested, offered help and support
i have been looking forward to this all morning i cant wait to test this!!!!!!
Nice one, first step to Jellybean goodness taken!
downloading now I will feedback soon thanks very much tgascouine!
Great news. Ill try as soon as radio is working, need my hox 24 h for my Company.
Thank you!
Sent from a gadget...
I too will need to wait for wifi and radio before proceeding and testing as it is a work number but thanks for the quick work. I look forward to using this rom in the future.
I'd love to test this however i feel its pointless to test a build where the main phone functions don't work.
People have already tested the previous build and the core system works great ( regardless of dormant issues when people begin to run their apps )
Good to see that the SD mount is working.
Gooood start mate! Hopefully mdeejay and others will be around to help soon!
Sent from my RENOVATED One X..
hutzdani said:
I'd love to test this however i feel its pointless to test a build where the main phone functions don't work.
People have already tested the previous build and the core system works great ( regardless of dormant issues when people begin to run their apps )
Good to see that the SD mount is working.
Click to expand...
Click to collapse
That's why I marked it dev. I'm putting the sources out early to allow others to contribute so we can get everything functioning quickly.
Awesome mate, I will have to wait for radio/wifi aswell as I need my phone on a daily basis but look forward to this
I wiped, installed rom, flash boot.img, cleaned cache and am currently stock at the HTC quietly brilliant splash screen.
I gave my gf a massage for a little while and came back and it was still stuck.
Any hints?
patriotaus said:
I wiped, installed rom, flash boot.img, cleaned cache and am currently stock at the HTC quietly brilliant splash screen.
I gave my gf a massage for a little while and came back and it was still stuck.
Any hints?
Click to expand...
Click to collapse
Give this boot img a try:
http://tom.gascoigne.me/jellybean/boot.img
patriotaus said:
I wiped, installed rom, flash boot.img, cleaned cache and am currently stock at the HTC quietly brilliant splash screen.
I gave my gf a massage for a little while and came back and it was still stuck.
Any hints?
Click to expand...
Click to collapse
Did you try to wipe the dalvik cache?
Wiped cache, flashed the appropriate kernel, bootet into CWM, factory reset, cleaned dalvik cache, installed the zip-file. Rebooted, starts up perfectly fine! I recommend to not flash the Gapps, because the Google Assistant will crash every time.
The system itself works so far, will continue some testing, I freaking looooove project butter, it's so smooth, so responsive, I'm close to making lots and lots of little HOXes in passionate love!
more2come said:
Did you try to wipe the dalvik cache?
Wiped cache, flashed the appropriate kernel, bootet into CWM, factory reset, cleaned dalvik cache, installed the zip-file. Rebooted, starts up perfectly fine! I recommend to not flash the Gapps, because the Google Assistant will crash every time.
The system itself works so far, will continue some testing, I freaking looooove project butter, it's so smooth, so responsive, I'm close to making lots and lots of little HOXes in passionate love!
Click to expand...
Click to collapse
Dayum, I feels ya bro!
I ended up flashing back my backup.
I'll give it a go following your exact guidance and see if it was my issue. If it still doesn't work, i'll give the boot.img a go.
p.s. what was the download size? can someone make a md5checksum?
patriotaus said:
I ended up flashing back my backup.
I'll give it a go following your exact guidance and see if it was my issue. If it still doesn't work, i'll give the boot.img a go.
p.s. what was the download size? can someone make a md5checksum?
Click to expand...
Click to collapse
ca85bdcb2b0e9aa2b38a6d5809291f7b tg_endeavoru-ota-eng.tom.zip
Okay, as there isn't much what you can do for thorough testing, here's a list of things that work/don't work:
Works:
-Core System
-HW-Acceleration (triple buffered p0rn!)
-Internal Memory usage
-Vibration motor (comes in handy when project butter turns you on too much)
-Activating Bluetooth/Bluetooth search (LOLed at this one ^^)
-Accelerometer (screen rotation)
-Multitouch (tested with pinch to zoom in gallery app)
Doesn't work:
-Wifi
-Radio
-Sound
-Light sensor (for automatic brightness)
-Notification light (tested it while charging)
-USB mounting
-Camera
-Button backlights
-Deep sleep (device is constantly awake)
-Everything related to the issues above
It appears i had a dodgy download.
my checksum was not ca85bdcb2b0e9aa2b38a6d5809291f7b twas 70e762e1b161dce4b13b56e485eb289e instead.
I might wait for an update until i redownload.
Oh god my pants just got tighter seeing the thread title. Hope to see the Dev gods get this thing in a daily stable state soon! Thanks OP!
I'm just looking forward to a build with any form of data working.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to SentinelROM for HTC One X (endeavoru - Tegra 3 Only). Compiled with the Linaro toolchain from modded CM10.2 source. Android 4.3
This is one of the most popular ROMs for Nexus 10 and Nexus 7, and after a month of hard work and optimisation, I am happy to release it for HTC One X.
This ROM is compiled from CyanogenMod 10.1 with all the features you get in a CM10.2 ROM, plus the following features.
Compiled with the Linaro toolchain for extreme performance.
Zip Aligned
Compiled from latest CyanogenMod 10.2 source by me, not a 'cooked ROM'.
OTA Updates supported
Improved Web Browsing performance
Improved 3D gaming performance
Amazing battery life
Additional theming and UI customisation
FAST support via this page and our Facebook Page
A free copy of my music player app
________________________
This ROM has been built to enhance the CyanogenMod 10.2 experience, with faster gaming and web browsing performance (no choppyness in Chrome too!).
Countless hours have been spent making tweaks to settings to squeeze the most performance I can find out of this ROM while still providing excellent battery life and without the dangers of overclocking and kernel level tweaking.
I compile this ROM and Kernel from the latest CyanogenMod source code, add my various tweaks and adjustments, then test for stability, so you get all the benefits of CyanogenMod 10.2, plus my tweaks and extras, all without the instability and inconvenience of flashing CyanogenMod nightlies (which are not designed specifically for the HTC One X like my ROM is.
The kernel source is available from the CyanogenMod's GitHub.
Requires HBOOT 1.29 or newer.
________________________
________________________
*Some users have reported ADB via USB not working. It's not actually a bug, but a difference in the way ADB works and the drivers required for CM vs SENSE based ROMS... If this is you, follow these steps to get ADB working..
Plug your phone in to your pc.
Open up device manager (Right click computer -> Manage -> Device Manager)
Find your phone in the list.
Mine was initially under 'Other Devices' labeled as 'One'
Right click -> Update Driver Software...
Select 'Browse my computer for driver software'
Select 'Let me pick from a list of device drivers on my computer'
Make sure to uncheck 'Show compatible hardware'
Select 'Android Phone' then 'Next'
Select 'Google, Inc' on the left pane and 'Android ADB Interface' on the right pane. Hit Next
Hit 'OK' if there was a warning.
To test if ADB is working, launch a CMD prompt and type 'adb devices'
You should now see you phone in the list!!
p.s. mounting your sdcard should also work.
Click to expand...
Click to collapse
________________________
If installing for the first time:
To install this ROM you will need to have an unlocked bootloader and a custom Recovery such as TWRP or ClockWorkMod installed (personally I recommend TWRP, I have had issues with restoring backups using CWM).
Copy the downloaded SentinelROM zip to your Internal Storage.
Boot into your custom recovery
Back up your stock ROM
[*]Boot into bootloader (power + Vol down) and enter Fastboot mode
[*]Extract boot.img from ROM zip and flash via fastboot [fastboot flash boot boot.img] (there are heaps of guides on how to do this)
Enter custom recovery
Factory Reset and wipe Cache and Dalvik Cache
Wipe System partition
Install the ROM
Install GAPPS package
Reboot - the first boot can take up to 5 minutes
Important: After installation you will be asked if you want to turn on CyanogenMod Statistics, please leave it off as this is an unofficial/modified build.
Note: Use of titanium backup to restore apps and data from another ROM is not recommended, and is the source of 90% of user issues, especially when it comes to battery life. Do so at your own risk.
You may flash other kernels as you wish via recovery. Remember to also flash the correct libraries for any 3rd party kernels. Instructions will be given by the Kernel author. NOTE: Updating the ROM via OTA will also overwrite any custom Kernels you have installed.
________________________
Please visit my FAQ's page before asking questions in the thread. Chances are the answer is already there! I'm always happy to help out with any other questions.
________________________
Thanks very much to all those who have answered my questions through the process of creating my own ROM, you know who you are.
CyanogenMod for their outstanding work. Full credit to them for the bulk of this ROM.
OTA-UpdateCenter.pro for their OTA database support and OTA Updater app source.
________________________
NOTE: Unless otherwise stated, the following mods are developed by SentinelROM users and therefore I can only offer limited support for problems caused by using them.
Clock and status bar mods - Use these for transparent status bar and centre clock, etc - Thanks to "peetu20"
________________________
02/10/13:
SentinelROM v5.00 - See Changelog for details.
NOTE: Remember to update your boot.img via fastboot.
Choose from an increasing range of Premium Themes for SentinelROM here.
Please don't forget to hit the Thanks button too
GAPPS
http://goo.im/gapps >Check the latest package available on top
MD5Sum: check the md5 of the files before flashing it
________________________
I hope you enjoy my ROM. If you do, plase consider a donation to the CyanogenMod team. If you really like my build, please consider a donation to me as well. Donations go towards flowers for my wife so she lets me keep developing!
New development, announcements and pipeline work will be posted on our Facebook page, so be sure to 'like' us if you like SentinelROM
02/10/2013:-
v5.00 -
*ROM rebuilt completely from scratch
*Compiled with new Linaro toolchain v4.8 for a further performance boost.
*Updated to latest CM10.2 source (Android 4.3)
*Adds all the latest CM features.
NOTE: A Full wipe is highly recommended as this is a new ROM base.
NOTE: You must install the latest Android 4.3 GAPPS Package after flashing the ROM.
YOU MUST FLASH BOOT.IMG VIA FASTBOOT.
20/06/2013:-
v4.75 -
*Compiled with new Linaro toolchain v4.8 for a further performance boost.
*Updated to latest Mali graphics drivers for improved performance and stability.
*Updated to latest CM10.1 source (Android 4.2.2)
[NOTE: You must wipe your System and Dalvik caches after upgrading. GAPPS Must be re-installed after updating. Please view the instructions here.
YOU MUST FLASH BOOT.IMG VIA FASTBOOT.
25/05/2013:-
v4.60 -
*Compiled with Linaro toolchain for a huge performance boost.
*Updated to latest Mali graphics drivers for improved performance and stability.
*Updated to latest CM10.1 source (Android 4.2.2)
*Fixes to Camera
*Fixes to Apollo
*Fixes to Clock
[NOTE: You must wipe your System and Dalvik caches after upgrading. GAPPS Must be re-installed after updating. Please view the instructions here.
YOU MUST FLASH BOOT.IMG VIA FASTBOOT.
19/05/2013:-
v4.50 -
*Compiled with Linaro toolchain for a huge performance boost.
*Updated to latest CM10.1 source (Android 4.2.2)
*Kernel and ROM tweaks for improved performance
*Improved Camera
*Updated Launcher
*Increased notifications volume
[NOTE: A clean installation is required for this update. please view the instructions here.
YOU MUST FLASH BOOT.IMG VIA FASTBOOT.
04/05/2013:-
4.40 -
*Camera Fixed.
*Voice activated Camera Shutter option
*Added new LMT pie controls – developed in collaboration with noname81.
(for instructions on how to get started with LMT Pie Controls, visit noname81′s thread and watch the video below).
*Fixed video playback issues and freezes
*Additional tweaks for increased performance and battery life
YOU MUST FLASH BOOT.IMG VIA FASTBOOT.
IMPORTANT: While this update will run with the existing v4.20 kernel. I strongly suggest you extract the boot.img from the rom zip and flash it via fastboot. This applies when updating via OTA also.
NOTE: You may need to reflash GAPPS after the update if some apps are missing.
20/4/2013:-
v4.30 -
*Tweaks and improvements to performance.
*Improve Wi-Fi signal strength.
*Addresses any issues with SystemUI memory leaks.
IMPORTANT: While this update will run with the existing v4.20 kernel. I strongly suggest you extract the boot.img from the rom zip and flash it via fastboot. This applies when updating via OTA also.
NOTE: You may need to reflash GAPPS after the update if some apps are missing.
14/4/2013:-
v4.20 -
*Initial Release for HTC One X
Click to expand...
Click to collapse
Overview Video showcasing some features, general performance and gaming in NFS Most Wanted.
Here's a video proving the extreme battery life.
ROM review by Flow:
A run through of the various settings and configurations.
Nice to see another ROM!
What languages are supported?
...and how do I get the weather forecast, like the one in your first screenshot?
Sounds great! Gotta put it to the test.
thanks for your work
this rom build source same http://forum.xda-developers.com/showthread.php?t=2203331 ?
Hi tc, for some reason all aosp based roms are in original android development, I think you should consider moving your rom there
Thanks for your work
Sent from my HTC One X using Tapatalk 2
This ROM isn't AOSP based. It's CM10.1 based.
nice!:good:
codexc said:
thanks for your work
this rom build source same http://forum.xda-developers.com/showthread.php?t=2203331 ?
Click to expand...
Click to collapse
Will check it then... Does the capacitive buttons is always on ?
Sent from my HTC One X using xda premium
If you turn on "Sweep2Wake" under settings, they stay active when the screen is off, otherwise they turn off when the screen is off.
Sentinel196 said:
If you turn on "Sweep2Wake" under settings, they stay active when the screen is off, otherwise they turn off when the screen is off.
Click to expand...
Click to collapse
That's not what I meant. . . If you used sense based roms you can see that the capacitive buttons are accommodating according to the lighting condition around you... Turns off in bright light and turns on in dark areas...
Ps: this behavior is only working on ICJ by LorD ClockaN not any other aosp or cm10.1 based rom even the official one.
I had a talk with seadersn in his rom thread but I couldn't solve it.
That's what I meant.
Sent from my HTC One X using xda premium
Oh right! Sorry, I misunderstood.
No, they don't automatically light up in dark conditions. they light up as soon as you touch them. You can also choose to have them off all the time, or light up with notifications.
Sentinel196 said:
Oh right! Sorry, I misunderstood.
No, they don't automatically light up in dark conditions. they light up as soon as you touch them. You can also choose to have them off all the time, or light up with notifications.
Click to expand...
Click to collapse
Yes that's I know but I don't like the rule of all or none... But I hope you could check that... may be you can help solve this issue for all the users of cm10.1 and FYI it's not kernel related.
Sent from my HTC One X using xda premium
I can certainly take a look at it for the next build.
Sentinel196 said:
I can certainly take a look at it for the next build.
Click to expand...
Click to collapse
Thanks
Sent from my HTC One X using xda premium
I haven't used your ROM for nexus10.I just try it on my hox.It's very very fast. Thank you mate.
You're welcome. I'm just uploading an overview video onto YouTube now so you guys can try before you buy. I'll post it here as soon as it's uploaded, which will be about 2 hours (I always encode in Full HD).
Sentinel196 said:
You're welcome. I'm just uploading an overview video onto YouTube now so you guys can try before you buy. I'll post it here as soon as it's uploaded, which will be about 2 hours (I always encode in Full HD).
Click to expand...
Click to collapse
F5 F5 F5 refreshing and waiting
Sent from my HTC One X using xda premium
Versioning explained:
>>>>>>>>>|0.92*|>>>> alpha>>>>>>beta>>>>RC>>>>1.0>>>>>
*0.92 will be removed as an option once RC comes out
This ROM is a spin-off from Mr. Linscue's and CyanogenMod sources.
What makes it different is that it is built with Linaro toolchain, current 4.7., instead of Google supplied one.
It's a product of my curiosity, Mr. Linkscue's extensive patience with helping me to understand the whole picture and his work so far on our devices. This wouldn't be possible without him.
To be able to build with Linaro toolchain there is a lot of CM source editing and git cherry-picking to make code fit for Linaro's GCC so the final ROM can actually be compiled. Thanks to Open Source, Android, internet and XDA-devs, I have been able to make it real by collecting the info and conveying it to this ROM.
I have to remind you, this is my personal build, it was never intended to be released to the wide public, I'm not a programmer/coder and there is no warranty.
Few notes:
1
The build: This is a first functional build through Linaro for this phone. It's compiled with -O3 flag, so /system (ROM) side is 90% optimized. I' m continuing to find proper code snippets that will further improve the build.
2
Battery life. Kernel used is prebuilt Lenovo, therefore battery life should be similar to official ROM, bar the specific LenovoPower settings, however if you are installing CM you are expected to know how to manage your phone. Without Lenovo's updated kernel sources, further optimizations are not possible, either for performance or extending battery life. If you are experiencing poor battery life, there are two things, 1. You have just I nstalled the ROM, give it a few days for system to settle in. There are few things going on during first day or two that might deteriorate your battery life 2. You have an app installed that is keeping your phone awake, preventing it to go to deep sleep. You can install BetterBatteryStats from here: http://forum.xda-developers.com/showthread.php?t=1179809 and find the offending app.
3
If you like it, use it. We are fixing general bugs as we go, and we know what those are. You may report them here but don't expect them to be fixed. Any app addition request or AOKP/MIUI/whatever port will not be entertained. As I said in the beginning, this is my personal build and I'm just sharing it with you.
4
Why name it SENNA: Ayrton Senna: “And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high.This rom was made possible thanks to:
1.
linkscue
2.
zuncun
3.
xda-dev usersDJLamontagneIII, @Dri94
4.
OpenSource
5.
Linaro
Sharing is caring, so if you want to repost this ROM to other places, I don't care but I do ask you kindly to refer to http://bbs.lephone.cc/k860/t570716/
Since 99% of the work is by Mr. Linkscue,take your time and drop by his thread: http://bbs.lephone.cc/k860/t553805/1/ and give him some kudos.
That's all.
Two releases:
SENNA 0.92
Latest CM source
Reverted the codecs to official, now video is ok
Updated busybox binary
Special thanks to linkscue on his continued support
SENNA beta 1
Kernel is built from Lenovo old source and adapted for JB
Both kernel and ROM are built with Linaro at O3 optimization level
Samsung's gralloc, hwconverter, fimg and kernel mali drivers, readjusted memory use, replaced ion libs.
Bloetooth works.
Disable HW overlays to have video working in landscape mode
(Current result on Antutu is 21605) (I have to note here that I have noticed performance deterioration, the number you get varies and drops on subsequent tests)
SENNA beta 1
[bugfix] *Wireless hotspot - so far ONLY open network is supported
*replaced Bluedroid stack with Bluez - core to UI - BT works now,
****please report special use cases if there are bugs.****
[enh.] *Screen off animation
alpha6 / kernel 3.0.40
* corrected schedulers in cgroups (oops)
* Latest lowmemorykiller
* lowmemorykiller autodetect oom_adj values
* added CPU topology patch
* added compaction and migration
* CPU unaligned access path
* Patched CRC32
* Replaced TreeRCU > jRCU (Read/Copy/Update)
* Replaced SLUB > SLQB memory allocator
* WasActive page flag
* Makefile optimizations
* disable preemption in machine_shutdown
* synchronize_rcu_expedited instead of synchronize_rcu
* patched fimg
* completely updated kernel internals
* completely updated net and fs layer
* completely updated memory management
* [bugfix] long press on touchscreen during charging has been fixed
alpha5 / kernel 3.0.15
* Added SIO IO Scheduler
* Added BFQ IO Scheduler
* zram enabled (one zram device in use)
* KSM enabled in kernel, use menu to on/off its use
Beta 1: http://pan.baidu.com/s/1892bL
md5: af12fd4fc63542858cba978a8b7f6f51
0.92: http://pan.baidu.com/share/link?shareid=1733734082&uk=2184427820
md5: 25dffc77e3e269656497fa382a3897ba
Google stuff:
If you visit Mr. Linkscue's thread here http://bbs.lephone.cc/k860/t553805/ there is a link to Gapps preload partition.
http://dl.vmall.com/c0zc102rqh
Flash it as you would do with the ROM and then go to Settings/Advanced/K860(i) Install gms. Reboot. All should be there. In the same menu you are also able to lock the MAC address so it doesn't change on reboot.
Github is here:
https://github.com/jason013?tab=repositories
Good job. Running on my k860 with no issues. I hope you try to keep updating this ROM.
I will update you with issues I face.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Stuttgart using Tapatalk 2
finch.****break said:
Good job. Running on my k860 with no issues. I hope you try to keep updating this ROM.
I will update you with issues I face.
Sent from my Stuttgart using Tapatalk 2
Click to expand...
Click to collapse
Thanks for liking it. I will keep it updated as much as possible. There are few bugs remaining on the platform and we are working on fixing them.
Definitely let me know if you have any problems with the ROM.
Good Job
This rom so good ! Waiting next update !
great room :victory:
waiting next update
finch.****break said:
Good job. Running on my k860 with no issues. I hope you try to keep updating this ROM.
I will update you with issues I face.
Sent from my Stuttgart using Tapatalk 2
Click to expand...
Click to collapse
btw how about gmaps? its work? coz i try to cm 10.1 phone reboot after i open gmaps,
Thanks before :good:
Harmalah said:
btw how about gmaps? its work? coz i try to cm 10.1 phone reboot after i open gmaps,
Thanks before :good:
Click to expand...
Click to collapse
Maps work for some time now.
first to vote for 5 star YAY
easily a 5 star for me since i dont know any programming/coding and im too lazy to do so...almost no support on lenovo ROM side so this addition is very much welcome...please keep it updated and kudos/respect to you my sir :good::good:
my only request would be a transparent and small on screen button for more screen orientation (see attached of my current screen)
you can get the systemUI here http://bbs.lephone.cc/thread-556541-1-1.html thanks thanks
Wow cool...will try ASAP
Sent from my Lenovo K860 using xda premium
innocence07 said:
easily a 5 star for me since i dont know any programming/coding and im too lazy to do so...almost no support on lenovo ROM side so this addition is very much welcome...please keep it updated and kudos/respect to you my sir :good::good:
my only request would be a transparent and small on screen button for more screen orientation (see attached of my current screen)
you can get the systemUI here http://bbs.lephone.cc/thread-556541-1-1.html thanks thanks
Click to expand...
Click to collapse
I'm sorry, you are talking about transparent taskbar? That iis as much as I could understand from the pics you posted.
To put it bluntly, what is going on now is trying to build kernel from source to match 4.2.2 and then cleaning up of proprietary files. Any UI polishing/additions I might consider at later date. So far, it seems to be a very far date But hey, it is functioning so far and sorry, but no..
relevant_placeholder said:
I'm sorry, you are talking about transparent taskbar? That iis as much as I could understand from the pics you posted.
To put it bluntly, what is going on now is trying to build kernel from source to match 4.2.2 and then cleaning up of proprietary files. Any UI polishing/additions I might consider at later date. So far, it seems to be a very far date But hey, it is functioning so far and sorry, but no..
Click to expand...
Click to collapse
yes both the onscreen button and the taskbar...its ok your the boss here anyways...and again thank you for sharing
i have another question uhm can i use this gapps http://wiki.cyanogenmod.org/w/Gapps since your rom is missing google play and other such gapps TIA
innocence07 said:
yes both the onscreen button and the taskbar...its ok your the boss here anyways...and again thank you for sharing
i have another question uhm can i use this gapps http://wiki.cyanogenmod.org/w/Gapps since your rom is missing google play and other such gapps TIA
Click to expand...
Click to collapse
Ok, I had skipped few tips here. If you visit Mr. Linkscue's thread here http://bbs.lephone.cc/k860/t553805/ there is a link to Gapps preload partition.
http://dl.vmall.com/c0zc102rqh
Flash it as you would do with the ROM and then go to Settings/Advanced/K860(i) Install gms. Reboot. All should be there. In the same menu you are also able to lock the MAC address so it doesn't change on reboot.
relevant_placeholder said:
Maps work for some time now.
Click to expand...
Click to collapse
btw how to fix USSD and change animated while charging ?
1. i try ussd not working and i used rillibrary.rar to fix ussd its working but signal bar not fully detect (how to fix)
2. and i could not charge if handphone is trunoff (how to fix)
thanks berfore
Harmalah said:
btw how to fix USSD and change animated while charging ?
1. i try ussd not working and i used rillibrary.rar to fix ussd its working but signal bar not fully detect (how to fix)
2. and i could not charge if handphone is trunoff (how to fix)
thanks berfore
Click to expand...
Click to collapse
Phone board/bootloader recognizes several operating modes like off charge, on, off, test etc. Mr. Scue identified them and it is working, however there is a problem that when you boot the phone after charging it in off mode, screen will turn white around the edges sometimes. For safety of your devices this part of functionality is not included yet.
I'm not familiar with the USSD problem yet. Will have a look into it, but if it wasn't working in official release, it could take time to make it working here.
relevant_placeholder said:
Phone board/bootloader recognizes several operating modes like off charge, on, off, test etc. Mr. Scue identified them and it is working, however there is a problem that when you boot the phone after charging it in off mode, screen will turn white around the edges sometimes. For safety of your devices this part of functionality is not included yet.
I'm not familiar with the USSD problem yet. Will have a look into it, but if it wasn't working in official release, it could take time to make it working here.
Click to expand...
Click to collapse
:good: thanks for explain
relevant_placeholder said:
Ok, I had skipped few tips here. If you visit Mr. Linkscue's thread here http://bbs.lephone.cc/k860/t553805/ there is a link to Gapps preload partition.
http://dl.vmall.com/c0zc102rqh
Flash it as you would do with the ROM and then go to Settings/Advanced/K860(i) Install gms. Reboot. All should be there. In the same menu you are also able to lock the MAC address so it doesn't change on reboot.
Click to expand...
Click to collapse
ive done all there is to do but still youtube dont work...em i missing something or youtube doesn't really work ???
innocence07 said:
ive done all there is to do but still youtube dont work...em i missing something or youtube doesn't really work ???
Click to expand...
Click to collapse
Ok, this questions now are going out of topic but let's chase this rabbit down the hole.
I am not familiar with the workings of youtube app (I assume you have successfully installed Play store and had it installed from there) so I am not sure what video/audio codecs it uses.
I can tell you right now one thing, related to video playback and Samsung's OMX codecs (the ****ty opensource ones) hw accel. video on this ROM is currently broken. I will soon reissue the ROM with files from official ROM to have that part working again, until I sort out what gets broken on OSS ones.
Currently I'm hands deep in kernel, I managed to transplant updated mali drivers into the old source to make it run on 4.2.2 and did some ugly hack job on HAL layer to have CM working, I have it at system stable level now. I'm tired and sorry for not being of much help, please google yourself and see what exactly are youtube app dependencies to make the videos run. If it uses on board hw codecs, I already told you what is the problem.
EDIT: try to disable GPU rendering for a test, in Developer options. just to see.
I flash several times this rom and always the same 2 problems ! Wifi doesnt work ! Stays there it said "turning wifi on..." and the 2nd camera program ( i dont remember the name ) always force close !!! Thanks
Sent from my K860 using xda app-developers app
what a great rom !! i hope you can fix the youtube problem and others minor problem soon!! :good:
Yup tried with GPU rendering disabled, HW accel enabled disabled.. Not just with youtube, videos don't work on many video content apps like imdb etc..
---------- Post added at 01:15 PM ---------- Previous post was at 01:15 PM ----------
However, wifi and focal seems to be fine
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download:
http://dualhoki.vim.hu/bubor/dev/pac4.4/
http://rpi.bubor.hu/bubor/dev/pac4.4/
Changelog:
20140327: first release
20140601: remove gmap, remove wifidirect ( it doest work)
20140608: android 4.4.3
20140627: android 4.4.4
Install:
* Read this
* To safe start with stock, boot at least once to stock ( you can ignore this step, but you might have issues)
* Use my latest TWRP.
* Factory reset( you may skip this, but dont report bugs)
* Install zip
* Enjoy
Issues:
If you have issue, please repeat installing steps, but start with flash stock with odin, and boot once with stock.
No sound with skype, no bt call sound. Fix
Capture picture and video has fixed rotation.
Video recording may crash with default (only?) app
Gps works, read this fix
Some app doesnt support our device, try older version, read this for list
Tell me
addons:
Face unlock support: http://dualhoki.vim.hu/bubor/dev/faceunlock.zip
Swap internal external sd: http://dualhoki.vim.hu/bubor/dev/change-fstab.zip ( it replaces fstab.n1, it should work with all KK)
reserved
.repo/local_manifests/roomservice.xml
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="CyanogenMod/android_hardware_samsung" path="hardware/samsung" remote="github" revision="cm-11.0" />
<project name="CyanogenMod/android_packages_apps_SamsungServiceMode" path="packages/apps/SamsungServiceMode" remote="github" revision="cm-11.0" />
<project name="buborh/kernel_samsung_i927" path="kernel/samsung/i927" remote="github" revision="stock" />
<project name="buborh/android_vendor_samsung_i927" path="vendor/samsung/i927" remote="github" revision="omni" />
<project name="buborh/android_device_samsung_i927" path="device/samsung/i927" remote="github" revision="pacman-4.4" />
<project name="tonyp/android_vendor_google" path="vendor/google" remote="github" revision="cm-11.0" />
</manifest>
thank you bubor
I love PAC rom's
use it and report
Using this ROM for more than a week. It's very stable, and no issues so far except known that exists on all kitkat ROMs (one can find them in first post, and also avi isn't playing in default player and capacitive buttons (menu, home, back) are not responding sometimes for a couple of seconds after going out of deep sleep).
I already said about loads of features and customizations here, it's really great to have so many options to fine-tune the ROM, and there are even prebuilt build.prop and init.d tweaks (GPU interface acceleration make phone usage so smooth!). The PAC-Performance for CPU clock control allows to disable second core in our CPU, and this is what I recommend to everyone! The battery last longer with disabled second core and there are no performance lags at all in everyday tasks! That's much better option than to change governor for battery saving. Of course, you should enable second core back when playing games.
@Makshow:
how does it compare to bubor's previous (4.3 based) PAC-releases, if you were using these? my i927 is still on the 20131106 build because I was ~roughly satisfied with stability and usability and didn't want to risk an jolly acceptable setup
@bubor:
Is this beast easy to build with your posted roomservice manifest, or does it need manual tinkering, give compile errors or so?
need a custom kernel build because I want to track per-process I/O usage with iotop and fatrace within my debian chroot and they need non-default CONFIG_TASKSTATS, CONFIG_TASK_DELAY_ACCT, CONFIG_TASK_IO_ACCOUNTING and CONFIG_FANOTIFY... :laugh:
4.3 PAC and 4.4 PAC are different things. Prior to 4.4 PAC meant a blend of PA, AOKP and CM ROMs, so it has almost all the features of these roms for the cost of RAM and stability. PAC 4.4 was made from scratch based on CM 11 with additions of many non-heavy features taken from other ROMs. So the RAM usage is almost the same as in CM 11, but there are no PA UI settings, no AOKP 9-target lockscreen slider and so on. But there are OmniSwitch, Active Screen, Identicons... The most notable change from CM 10.2 to CM 11 is new Trebuchet launcher - but you should look at it yourself.
In 20140327 it was still an alpha release, but a stable one (credits for this are going to bubor's kernel and build tree, I presume. All ROMs he built are very stable).
hi bubor
I can not use theme on this rom
please check it
Thank you Bubor for this PAC build and keeping the glide still a kicking device. I've been a fan of PAC roms since the first time I flashed one. Currently I'm still on the 4.2.2 rom by Kick, mostly for 1 reason, I can choose from a range of governors (from the LiteKernel by thegreatergood).
Is there a way you can port the governors from that kernel to something compatible for this rom? I tried decompiling the kernel when the PAC 4.3 came out, but I just got lost (I don't think I was using the programs correctly, or the correct programs). The link for the kernel mentioned is here (scroll down for the 4.2 version),
http://forum.xda-developers.com/showthread.php?t=2067896
zyphuris55 said:
Thank you Bubor for this PAC build and keeping the glide still a kicking device. I've been a fan of PAC roms since the first time I flashed one. Currently I'm still on the 4.2.2 rom by Kick, mostly for 1 reason, I can choose from a range of governors (from the LiteKernel by thegreatergood).
Is there a way you can port the governors from that kernel to something compatible for this rom? I tried decompiling the kernel when the PAC 4.3 came out, but I just got lost (I don't think I was using the programs correctly, or the correct programs). The link for the kernel mentioned is here (scroll down for the 4.2 version),
http://forum.xda-developers.com/showthread.php?t=2067896
Click to expand...
Click to collapse
Original litekernel doesnt support selinux, I dont think its right to use that.
What governor do you need?
Litekernel has many other modifications, include only governor is easy tasks.
I mostly use Wheatley, seems to be the nicest on performance vs battery life (IMO). If that one can't be added, then SmartAssV2 .
zyphuris55 said:
I mostly use Wheatley, seems to be the nicest on performance vs battery life (IMO). If that one can't be added, then SmartAssV2 .
Click to expand...
Click to collapse
included in the latest release, please test it and report back.
Setup wizard - not working
Just flashed the newest release (factory and internal sd), and a popup saying "Setup wizard has stopped. Blame the Split Screen" appeared. I keep clicking the "ok", but it won't go away. Behind it, there is a popup saying something about the ASOP keyboard has stopped. :-/
I'm going to try the version before this, then try flashing this version over that (to avoid the setup wizard).
[Edit]
I tried the previous version (factory and internal sd), same setup problem. So I installed the 4.2.2 (kick) PAC (bare setup), then installed the newest PAC version on top without any wipe. It skipped the setup wizard, but kept showing errors and blaming it on the split screen (mostly the keyboard crashing, even in places where the keyboard isn't used like the settings menu).
Lol, I did factory reset, but still not welcome wizard at all.
would you send me logcat?
Startup logs
bubor said:
Lol, I did factory reset, but still not welcome wizard at all.
would you send me logcat?
Click to expand...
Click to collapse
Took awhile to get the computer to see the device (computer kept saying "unable to install drivers"). After I got the logs running, I pressed "ok" a few times at the setup wizard place, saved the logs...then the computer lost connection with the device.
Hopefully this log does something good, I'm going back to the Kick version of PAC till something is found.
p.s. for this test, I FC then went straight to installing the new PAC
Yes, I didn't have welcome wizard too when installed PAC. I thought: "wow, how convenient!". I was a bit tired of this wizard when installing many different ROMs.
Installed 20140416 version on top of 20140327. Everything went smooth, no issues so far. Let's test some new governors.
---------- Post added at 02:40 PM ---------- Previous post was at 01:59 PM ----------
Wheatley governor seems to work as intended. A fine thing, but I still prefer Interactive with second core offline. Less lags, and 1 core with interactive should be less battery consuming than 2 cores with Wheatley? Or not? Will test it someday.
Smartass and smartass2 seems to be not working as intended. Smartass ramps the clock to 816 Mhz and stays on it whole time when the screen is on, Smartassv2 makes the same, but with 1000 Mhz like performance governor.
Also, there is no access to the settings for any of these three governors.
Makshow said:
Yes, I didn't have welcome wizard too when installed PAC. I thought: "wow, how convenient!". I was a bit tired of this wizard when installing many different ROMs.
Installed 20140416 version on top of 20140327. Everything went smooth, no issues so far. Let's test some new governors.
---------- Post added at 02:40 PM ---------- Previous post was at 01:59 PM ----------
Wheatley governor seems to work as intended. A fine thing, but I still prefer Interactive with second core offline. Less lags, and 1 core with interactive should be less battery consuming than 2 cores with Wheatley? Or not? Will test it someday.
Smartass and smartass2 seems to be not working as intended. Smartass ramps the clock to 816 Mhz and stays on it whole time when the screen is on, Smartassv2 makes the same, but with 1000 Mhz like performance governor.
Also, there is no access to the settings for any of these three governors.
Click to expand...
Click to collapse
dont you think disable one core makes it bugs?
It works "fine" for me, I mean it changes min to max well when both core enabled.
After new ROM flashed, kernel settings are reset to default, so both cores were enabled. When screen is off, governors are also working fine: gradually slows the CPU and entering deep sleep. Well, maybe, there's some problem on my side because I did no wipe before install. I wasn't going to use smartass anyway.
By the way, thank you for a ROM update!
Would it be possible to get just the kernel? Or apply the updates to grakernel? The PAC ROMs seem inherently unstable, (I call it the "Too Much ****" syndrome) but your unofficial cm11 ROMs are rock solid. Best Glide ROM thus far.
ReznikAkime said:
Would it be possible to get just the kernel? Or apply the updates to grakernel? The PAC ROMs seem inherently unstable, (I call it the "Too Much ****" syndrome) but your unofficial cm11 ROMs are rock solid. Best Glide ROM thus far.
Click to expand...
Click to collapse
its alpha, dont expect too much.
I am not responsable of anything that happens to the device neither XDAHi i pressent my work for gnex for all it variants, the rom is divided into the main partitions of linux and they are different regarding updates , this decision is taken by me becouse of my little time to work in this kind of source proyects so all my advances regarding system , boot and recovery will be separally updated and compile , if you doesnt understand anything just keep on in the post for a while.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SYSTEM
It is based on aosp, and some optimiziation you can find in github all detaills.
Based also in DDK 1.9 and lastest OMAP4 AOSP commits
BOOT (KERNEL)
It is based on stock one and it is updated and change with github peoples commits
It is 3.0.11 + lastest OMAP4 AOSP commits
RECOVERY
It is based on TWRP , it update will be leased than system or kernel because if it works is less importants than other stuff.
Based on lastest TWRP 3.0
If you used TWRP 3.0 and isntalling gapps after 10min is not finnish reboot phone no problem
F2FS Data , Cache, system format can be done , only helpfull for DATA , but it you done it you will also wipe your SDCARD
How to install
For Recovery and BOOT update/install:
BOOT: fastboot flash boot NAME_OF_BOOT.img
RECOVERY: fastboot flash recovery NAME_OF_RECOVERY.img
For SYSTEM (ROM) Update/Install:
Go to TWRP, if it is first time flashing rom wipie factory reset DATA can be on F2FS or EXT4 your choice(I recommend F2FS)
Install: first ROM, second GAPPS(optional), third SU(optional)
DOWNLOAD
BOOT(Kernel):https://www.androidfilehost.com/?fid=24421527759889459
SYSTEM(OS/ROM):https://www.androidfilehost.com/?fid=24421527759881910
RECOVERY:http://www.mediafire.com/download/uizwqc9dwway4b9/twrp-3.0.0-tuna.img
CHANGELOG
BOOT:
27/02/2016:
812MBs RAM for user
11/02/2016:
New kernel based on Ziyan and OMAP4 AOSP + MY OLD COMMITS
756MB RAM
10/02/2016
Optimized GPU (-03 and disble some debug features)
Improve UI speed
GCC 6 support(not tested)
net: Performance fix for process_backlog
make clean kernel
08/02/2016
-03 optimizations
upstream google kernel 3.4
GGC 5 support (not working well)
Based on @zzpianoman kernel so all credits have to go for him
SYSTEM:
18/02/2016:
repo sync
RIL call issues work around
KSM tweaks and enabled
DEXOPT tweaks
SlimLauncher
OTA Support (Use OTAUpdater)
11/02/2016:
New soruce code based on lastest OMAP4 AOSP source
DDK 1.9
10/02/2016:
Corrupted build
09/02/2016:
BUG: need to add org.cyanogenmod.jar with filemanager from twrp adn chmod 755 for rom to boot (to by solve in next build)
Sync lastest compatible AOSP source
Add some optimizatiosn to ART. dexopts
Declare slow proccesor timeouts
RECOVERY:
08/02/2016:
TWRP 3.0.0
Fix not booting TWRP(init.recovery.rc add)
Credits
All people contribute to GNEX development on github , specially @zzpianoman and @Ziyan
Also the devs of i9000 for taking some ideas and commits: @sooti @Coldwindofnowhere and @humberos
Is it an AOSP base rom?
Next versions will have any feature?
DDK 1.8 I imagine....
Nautilus74 said:
Is it an AOSP base rom?
Next versions will have any feature?
DDK 1.8 I imagine....
Click to expand...
Click to collapse
Yes DDK 1.8 , yes is AOSP this is why it is call Android Open Source Project, umm feactures cm ones regarding display colour and kernel improvements that we need a lot of them for having a good android i am working on kernel most of time
stucks on first install in recovery. fixing permissions lasts more than 5 minutres.
maguro
twrp 3
opengapps nano
girkev said:
stucks on first install in recovery. fixing permissions lasts more than 5 minutres.
maguro
twrp 3
opengapps nano
Click to expand...
Click to collapse
Fixing permisisions related to open gapps no? IF yes you can take out battery no problem and boot normaly
Also rom is not booting or what? Have you add org.cyangenmod.hardware.jar and put it in system and chmod 755
In a few hours full update with simplify installation and kernel optimizations , you can find changelog in first post enjoy it
werty100 said:
In a few hours full update with simplify installation and kernel optimizations , you can find changelog in first post enjoy it
Click to expand...
Click to collapse
Sorry for not having it , system is not making build complitly i dont understand why, but kernel wokr so in a few minutes i post kernel at the moment
Download kernel linK:http://www.mediafire.com/download/3cyt5bap995580b/AOSPKernelv2.img
Next relase will by based on lastes OMAP4 Github group commits and before my won optimizations , so this makes update to DDK 1.9 and also bug in camera lines and some more free ram much more ram almost a 1024mbs (experimental) on gnex
Also it will befull AOSP i think no features to modify system like batery icon gamma colors at less not in a native way, use kernel audior for get the best of gnex
Lastest build working well no error flashing it just a zip and just it... also there is no line on recorded videos , reocrd works a litle buggy but just when oppening video camera and starting video recording then works well..
Only problem is that there is only 756MB of ram and was supposed to be much more ... it is more clean thsi rom and also a litle more old...
http://www.mediafire.com/download/mloy7imb126y1ms/aosp_tuna-ota-eng.werty100.zip
Someone uses my rom?¿
I did not find any bug now i am swinching my sim to gnex to test it completly
I am messing up with new build to get more ram but i am getting crazy
@werty100 Thank you for your work.
I would like to fully try it, but each gApps pacakge gives me Play services force stop after boot. Could you please suggest, which package are you using, please?
Davoss said:
@werty100 Thank you for your work.
I would like to fully try it, but each gApps pacakge gives me Play services force stop after boot. Could you please suggest, which package are you using, please?
Click to expand...
Click to collapse
Yes it happen to my also now after formaiting i dont know why it was working on previous build well play services
I am loose wiht it i dont know what gapps toput i will try anothers looking for them
werty100 said:
Yes it happen to my also now after formaiting i dont know why it was working on previous build well play services
I am loose wiht it i dont know what gapps toput i will try anothers looking for them
Click to expand...
Click to collapse
With this gapps : http://www.mediafire.com/download/3yqm5pw8x6b357p/open_gapps-arm-6.0-pico-20151124.zip
Seem to work at lees for me install them go to applicatiosn and delete data from google paly and play serices enter into playstore and will get the same resault but only one time and then apps will download and work well
werty100 said:
With this gapps : http://www.mediafire.com/download/3yqm5pw8x6b357p/open_gapps-arm-6.0-pico-20151124.zip
Seem to work at lees for me install them go to applicatiosn and delete data from google paly and play serices enter into playstore and will get the same resault but only one time and then apps will download and work well
Click to expand...
Click to collapse
Thanks! Seems to be OK now.
But, for some reason my home buttons is no longer woking and quick setting from notification panel is missing as well? Could it se gApps related?
Davoss said:
Thanks! Seems to be OK now.
But, for some reason my home buttons is no longer woking and quick setting from notification panel is missing as well? Could it se gApps related?
Click to expand...
Click to collapse
For me works good the home botton , try to reboot ...
Also quick settings in notiffication panel you mean the gear that open menú?
If it this for me also works
Enviado desde mi Galaxy Nexus mediante Tapatalk
While I'm not using this ROM currently (just flashed Ziyan's Unofficial CM13), what I understand so far is the way to flash Gapps on Android 6.x is you flash the ROM and then immediately thereafter flash Gapps (so they are already installed when the ROM boots up for the first time). As for which Gapps package to install, the opengapps pico package is recommended...
Gapps
For the one's who have problems with gapps.. I've read somewhere that you need a gapps package which comes with "Android System Webview" because somehow google services need that app to add your google account. Otherwise google play services just Fc's. This could be incorrect but at least it worked for me. So you could try the aroma version of opengapps and select the minimal amount of apps but with Webview. I hope this can help..
Great ROM, smooth and stable.
I have installed OpenGapps PICO package because TWRP said NANO package is too large. After boot up, Google Play service repeated FC. So, I have tried general approarch ( delete Google account etc. ), and nothing changed. But I launched Google Keep, it told me that there are lack of permissions with Google Play services. I turned all of permissions ON, then FC stopped immediately. I hope this helps somebody in FC trouble.
In addition, SuperSU and Xposed and GravityBox works fine in my environment. Now I'm very happy with my Galaxy Nexus. Thank a lot, werty100.
ssakuma said:
Great ROM, smooth and stable.
I have installed OpenGapps PICO package because TWRP said NANO package is too large. After boot up, Google Play service repeated FC. So, I have tried general approarch ( delete Google account etc. ), and nothing changed. But I launched Google Keep, it told me that there are lack of permissions with Google Play services. I turned all of permissions ON, then FC stopped immediately. I hope this helps somebody in FC trouble.
In addition, SuperSU and Xposed and GravityBox works fine in my environment. Now I'm very happy with my Galaxy Nexus. Thank a lot, werty100.
Click to expand...
Click to collapse
A lot of thanks to all giving intructions how to fix the only issue we have found..
Is very stable and fast a litle lago maybe sometimes when going back from app drawer to start screen...
And the battery can someone post screenshot or comment the resaults they have
I think this ROM is the resurretion of gnex, because i was having it in a box...
PD: I am not having at the moment any issue regarding calls having signal loss like in other marshallow roms
Enviado desde mi Galaxy Nexus mediante Tapatalk
For these 3 days, there is no trouble with this ROM.
Maybe DOZE works fine, battery drains as much as Factory Image's with my usage, 3G at Office, Wifi at home.
So, I don't have a reason to switch to other ROMs.
ssakuma said:
For these 3 days, there is no trouble with this ROM.
Maybe DOZE works fine, battery drains as much as Factory Image's with my usage, 3G at Office, Wifi at home.
So, I don't have a reason to switch to other ROMs.
Click to expand...
Click to collapse
Regarding the issue of signal loss a few seconds in other roms i have experience it now in a call but never before on other calls
Well rom is very very stabe and fast battery drainis as stock or less for my
I am with finals exam just 13 days to finnish my 2 nd term . After that i will try to make a global update with new commits and hopfully another launcher to fix AOSP ones lag some times and try to implement init.d tweaks for battery and perfomance.