The USB port on my vzw gnex is not working. I have to bend the cable and it will charge but won't connect to my computer
Post three of my guide has a link to return to stock and locked with no USB if you end up needing it.
Seems to be an issue with the cable to me, from what I read (bending the cable makes it charge, etc)... tried another one?
tried 3 cables
Same problem, 2 devices. I suspect that in my case, it is caused from me dropping the phone while holding it in a vertical position. Thus it lands in said position effectively shoving the charging cable right up its ass!!
could be. its next to my bed and i sometimes knock it off
Related
Anyone experiencing a loose usb port. I just got my ATT Tilt2 last week and noticed that the usb plug can be wiggled while inserted, which makes it lose the usb connection.
i have the tmobile version and it jiggles ever so slightly...had it for about 3 weeks now...my old mda usb port broke so i ame very conscious of this issue...
also, the keypad seems a little loose around the spacebar area, like its starting to come unglued
...
My old HTC Vogue developed that problem after about 1 year of use. My week old Tilt2 is quite snug. I don't think it's normal for the plug to be loose enough to lose the connection on a brand new phone.
Try a different USB cable. Not all USB jacks and cables are created equal, I have a few USB cables from other devices with the plug slightly too big for my phones (I don't want to force them in) and a few others that are too loose for them, thus difficult in making a good connection.
Over the last several weeks I've noticed that the USB port is a lot looser. Now if I accidentally just touch the USB cable (the official HTC one) it will lose synch and reconnect.
And actually, if I'm charging via USB on laptop, it is now LOSING charge rather than charging :s
leginag said:
Over the last several weeks I've noticed that the USB port is a lot looser. Now if I accidentally just touch the USB cable (the official HTC one) it will lose synch and reconnect.
And actually, if I'm charging via USB on laptop, it is now LOSING charge rather than charging :s
Click to expand...
Click to collapse
All of these parts are inexpensive and user-replaceable. Might be irritating that it should not be in need of repair but I would not let it f up your day.
Loose USB MIGHT be related to the female receiver end having a loose cinch plate. Use a magnifiying glass and a toothpick to check it. If that is not it, a cinch of the male end with a needle nose plier, just a tiny bit, might do the trick.
I'm going to call ATT warranty and see whether this is normal. I have tried several cables, all are about the same. Will see what they say. Thanks for the replies.
ptgptg said:
I'm going to call ATT warranty and see whether this is normal. I have tried several cables, all are about the same. Will see what they say. Thanks for the replies.
Click to expand...
Click to collapse
On the phone with them right now. They are offering to replace the phone.
So I just got this phone two days ago. I'm loving it, but I'm noticing that the charging cable that came with it is very tight when I plug it in the phone and it makes a click sound when in sits in place. Also when I have to remove the cable, it is so tightly attached to the phone that I have to put significant pressure to remove the cable.
My concern is that doing so in the long run may damage the charging port? Is this also happening with other users or is their a manufacturing defect in either the cable or the phone for me??
oem cable
raviluke said:
So I just got this phone two days ago. I'm loving it, but I'm noticing that the charging cable that came with it is very tight when I plug it in the phone and it makes a click sound when in sits in place. Also when I have to remove the cable, it is so tightly attached to the phone that I have to put significant pressure to remove the cable.
My concern is that doing so in the long run may damage the charging port? Is this also happening with other users or is their a manufacturing defect in either the cable or the phone for me??
Click to expand...
Click to collapse
mine is the same way. i've noticed its very dependent on the cable as well. it is a more secure fit on all my usb cables but i have a car charger that fits loose in all my devices and it is even a little tighter in my M8. i think this was done to allow for wear on the port and buy you some extra time before it wears out completely, i had to warranty my EVO4gLTE due to the charge port failing to keep cables.
I just purchased this unit. is it normal that the Stock Cable is Hard to Plug on the Charging Port of the Phone..
i need to try so many times before i can plug the charging cable to charging port of the phone before i can plug it successfully. i'm thinking of breaking the charging port if this is the case? Anyone who have the same concern? Thanks
bong0x00 said:
I just purchased this unit. is it normal that the Stock Cable is Hard to Plug on the Charging Port of the Phone..
i need to try so many times before i can plug the charging cable to charging port of the phone before i can plug it successfully. i'm thinking of breaking the charging port if this is the case? Anyone who have the same concern? Thanks
Click to expand...
Click to collapse
I noticed this as well. hopefully if something gets broken its more likely to be the connector on the cable than the charging port. I have tried a few other cables as well and all are pretty difficult to insert.
Well the way I see it would you rather have it flop around and be loose, or have a night tight fit?
On a more serious note I had the same issue when I first recieved my F400S. After a week or so it got better, you can always try an older micro usb cable thats more broken in to avoid this issue.
when i first got the phone it was like what you've desribed. but after a while, it wasn't an issue anymore, i guess its a good sign that the phone is brand spanking new.
Same for me, hard To plug in ...
Sent from my LG-D855 using XDA Premium 4 mobile app
Hi,
I tilt the usb-connector up (just a bit) while plugging it in.
Greetz
It requires a downward angle tilting towards the device to insert.
Same for me, but once you're using qi charging and Wi-Fi file transfer, you'll hardly ever use the port.
got it! it was like virg** phone. haha..
wow same issue here.
bong0x00 said:
I just purchased this unit. is it normal that the Stock Cable is Hard to Plug on the Charging Port of the Phone..
i need to try so many times before i can plug the charging cable to charging port of the phone before i can plug it successfully. i'm thinking of breaking the charging port if this is the case? Anyone who have the same concern? Thanks
Click to expand...
Click to collapse
Only way to get it in is by tilting the cable downward. Tried few cables, they are all doing the same thing. Exchange perhaps?
Sini-Siki said:
Only way to get it in is by tilting the cable downward. Tried few cables, they are all doing the same thing. Exchange perhaps?
Click to expand...
Click to collapse
Tilting the cable to plug in seems to be the norm on pretty much every G3. I doubt exchanging it will help.
Once you've done it for a while, it should become pretty easy to do.
Tilting the cable and just dealing with it are fine, but what happens when you stay finding usb cables that don't want to charge your G3 properly? I have one (very nice) 10ft cable and my phone plays a game of connecting and disconnecting while trying to charge with this cord. This courts does not give me the same problems on other devices. However the G3 charges just fine on all my other cables. Not using this cable is an obvious answer but i worry that the problem could get worse and what if I start having problems with other chargers?
For now, the solution is to tilt the cord slightly downward (or upward, depending on your perspective) as the port is just sliiiiightly more flush with the opening. My advice is to get used to doing this. A broken charger port is really a PITA, so taking an extra 2 seconds to plug it in is the prudent choice. My dad gave me a lot of good advice when I was growing up, and one of the gems turns out to be "don't force things."
As mentioned, once we get some wireless charging back covers on a more accessible basis, we'll all just use wireless charging and never plug in again. Except in the car.
The cable from my old GS4 plugs in very very easily. I haven't tried charging with it tho. I use it mainly for usb mtp.
Posted from my LG-D850
Difficult at first. It did get better for me though. I too thought i had damaged it or that it had shipped that way. And I also thought I was just breaking it more each time I charged and contemplated exchanging LOL. Make sure cord is facing the right way first (im still trying to put it in upside down sometimes), then you do have to tilt it down a bit to get in initially and then it tilts slightly up before fully inserting. It was very diificult to do the first couple days. Day 5 and its way easy. Hope this has helped and put your mind at ease This is my first Android phone and i'm luvin it!
the past new phones i had. was always hard at first to plug it in.
just gotta lube it up
Any new updates on this? I guess tilting the cable a bit is working, but will it ever get to the point it will go straight in? It really appears that this is not a defect but a LG design for the port.
Sent from my LG G3
still the same.. still virgin after many charging cycle
I agree with what was previously stated, after a week with phone, I've become used to putting the cable in. I'm pleased with the tight fit as I've had devices where it feels loose and unsecured.
It ain't nothing but a G thing baby... Lg G3 LGSL990
I've had my G4 since almost launch day and within weeks the supplied USB cable stopped charging the phone. I thought it was a cable problem, but it worked fine with other devices.
I tried other cables with the G4 and these still charged it so I thought nothing more of it until charging degraded with every USB cable I own to where the phone would only charge 20-30% during an overnight charge and the phone would frequently not recognise it was plugged in at all. I contacted LG who did a repair under warranty and all was fine.
I've now had the repaired phone back for about 3 weeks and the same problems are starting up again and it's only a matter of time until I am forced to return again for a repair.
Is anyone else having similar problems? I thought I may have just had an unlucky manufacturing problem, and the LG reps confirmed that to repair my phone they basically replace all the internal circuit boards and components rather than just replacing the individual component that is faulty (in this case the USB/charging port)
Basic debugging includes asking stupid questions, so please forgive but still answer any of those
Are you using a different charger? If so, check if that one is within specifications and if you do send in for repair again, use a different charger.
Are you propping up the device at an odd/weird angle or in a dock of some sort with the cable attached?
(As they replaced the entire print, it's probably not this, just the USB-micro port bent or broken.)
You could double check the wall outlets being used, there might be some kind of electrical problem there.
Either using all kinds of fancy electical testing gadgets, or stick a USB light into the hub or charger, does it flicker?
When sending it back for repairs, did they check the stock charger as well?
Hopefully these questions help you find any logical or plausible cause.
FreezyExp said:
Basic debugging includes asking stupid questions, so please forgive but still answer any of those
Are you using a different charger? If so, check if that one is within specifications and if you do send in for repair again, use a different charger.
Are you propping up the device at an odd/weird angle or in a dock of some sort with the cable attached?
(As they replaced the entire print, it's probably not this, just the USB-micro port bent or broken.)
You could double check the wall outlets being used, there might be some kind of electrical problem there.
Either using all kinds of fancy electical testing gadgets, or stick a USB light into the hub or charger, does it flicker?
When sending it back for repairs, did they check the stock charger as well?
Hopefully these questions help you find any logical or plausible cause.
Click to expand...
Click to collapse
Hi FreezyExp,
1. I am using the standard charger that came with the phone, but this has not been repaired/replaced. I have tried other chargers too, but all the same issue.
2. No weird propping up or anything like that. If I hold my phone while it is plugged in it is constantly vibrating as the charger connects and disconnects, and if I place it on the desk to charge I have to ensure that I have at least 3-4" of cabe "on the desk" to give it enough support to make the connection.
3. Wall connection is fine and I have tried it with a range of outlets around the home, both with extension sockets used and plugged directly into the wall and there is no different. No flickering light when using a USB light either.
4. When I sent it back all they asked me to return was the main section of the handset - so no battery or rear cover, no cables or chargers etc
It does seem to be the same issue as last time, a USB connection becoming loose from the main motherboard, but it seems weird that I have had the same issue twice in the space of 4-5 months.
I've been having some sort of problem with my G4 usb port. If I plug it in to a computer, it will lose connection and get a connection again if I barely touch the end of the cord at the phone end. I've tried many different cords and different usb ports on my computer, but it still has problems.
I can't fast charge, either. When I plug it in to fast charge, it actually starts discharging even faster. I've had some extreme battery life problems, too. It drained from 100-36 the other night with everything disabled, and it's been doing that kind of thing a lot lately. I'm guessing that the charging port is what's messing up my battery life because it won't charge correctly.
Never dropped it or anything.
I got my G4 on January 24 and my USB port has also failed. I am getting a replacement from Verizon, but am concerned that a six month old phone has this issue.
I also own a G4 H815. A while ago the phone started not receiving any charge from the cable and I would have to prop it up from right under the cable's micro usb end. Thought it was because it was bent inside the port and not making connection with the cable so I had the port replaced. Now I'm experiencing the same problem and I think it might be the cable that's already gone kaput and is effing up the port itself. I took the phone to the same place to get the port replaced again and bought new cables (I lost both the original adapter and the cable, which were charging slow anyway. Now using a 2A Asus adapter which works great) and when I asked the guy at the repair shop, he says it's a chronic issue with G4 devices. I don't really understand how it would happen twice in just a few months even with a new charger port. What should I make of this? Did they replace my port with an already faulty one, cahrged me full price and now trying to sell this bogus or am I really doomed with this phone?
As of today, when I plug in the charger it will show the Dash charging symbol, then cut in and out a few times before it stays charging. I updated to 5.0.3 yesterday if it means anything.
Is this normal? I couldn't find anyone else reporting this.
It happens to me too, even back in Nougat. It starts as regular charging and then a couple of seconds later, switches to Dash. I figure the delay is due to the charger and phone figuring out how much battery the phone has left to determine how much amps to push through. Dash charging operates at different amperages depending on the voltage of the battery. Thing is, that either that never seemed to happen on my OnePlus 5 or I never noticed it, but on the 5t it does.
I think I'd be more comfortable with your issue. When I see the charging LED flashing and the charging notification disappearing and reappearing, it's unsettling.
My Nexus 5X would do this as pocket lint would build up in the USB port, preventing the USB cable from fully seating. Every so often I would have to take a small needle (something non conductive would probably be better) and carefully clean around the edges to pull out the lint. I was always amazed at how much build up really does end up in the USB port and headphone jack.
I used to have that issue with old micro USB ports and this definitely reminds me of that. I'm concerned though because I've had the phone less than a week and the port is clean. I also get that satisfying 'click' when plugging in the charger.
Ah, well that probably isn't your problem then. I would try another charger and cable to try and isolate the problem between the phone, cable, and charger.
Remember the OnePlus cable is unique, you can't use just any USB C cable with the dash charger. I believe IIRC the OEM cable has a 10k resistor, while most in spec USB C cables will have a 56K resistor. However you can use another charger and cable and see if it cuts out as well.
OhioYJ said:
Ah, well that probably isn't your problem then. I would try another charger and cable to try and isolate the problem between the phone, cable, and charger.
Remember the OnePlus cable is unique, you can't use just any USB C cable with the dash charger. I believe IIRC the OEM cable has a 10k resistor, while most in spec USB C cables will have a 56K resistor. However you can use another charger and cable and see if it cuts out as well.
Click to expand...
Click to collapse
We have three 5t phones here all purchased last week. I tried all three charges that came with the phone and it does this with each one, all plugged into different outlets.
We updated a 2nd one to 5.0.3 and now this one also has the charging notifications flicker on and off about 7 times before it stays charging normally. I haven't tested the 3rd yet because it was fully charged when I came home.
It's odd that it is two of our devices now doing this and I haven't seen anyone else with this problem. I would assume that we got phones out of a defective batch, but they were definitely not doing this before the update.
Just an update, I wiped system and cache and it still does this.
It didn't do it when I plugged in at 88% immediately after wiping. But it does do it when I plug in at around 30% like I usually do.
I'm wondering now if they all do this after the 5.0.3 update and no one really notices.