So i have a Canadian Wave S8500 running 1.0, I have flashed a Europe O2 firmware for 2.0 and WOW is a major change the only problem is the modem, my SIM no longer works. I tried flashing the modem from Bell Stock firmware but it failed.
Anyway to flash the modem?
ASlso Anyone can recommend a FW that works with North America?
jebise101 said:
So i have a Canadian Wave S8500 running 1.0, I have flashed a Europe O2 firmware for 2.0 and WOW is a major change the only problem is the modem, my SIM no longer works. I tried flashing the modem from Bell Stock firmware but it failed.
Anyway to flash the modem?
ASlso Anyone can recommend a FW that works with North America?
Click to expand...
Click to collapse
I think you need this.... http://forum.xda-developers.com/showthread.php?t=1473089&highlight=unlock but i'm not a person that knows in deep the phone so maybe you have to wait for more answers.
Cooetzee said:
I think you need this.... http://forum.xda-developers.com/showthread.php?t=1473089&highlight=unlock but i'm not a person that knows in deep the phone so maybe you have to wait for more answers.
Click to expand...
Click to collapse
Thanks for that, i never knew you could SIM unlock for free now, it actually worked with my Rogers SIM eventhough its a Bell phone. My problem now however is that it only works on Rogers, it does not work on Bell. The SIM is detected but cant make calls and this is likely because of a UK modem that does not support Bell frequencies. I need a North American Modem for Bell/Rogers and Telus.
Bell/Rogers are the providers? On what freq they are working? Because wave 1 is working on this
2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 900 / 2100
HSDPA 850 / 1900 - North America
I try to help but i think you need help from someoane who understand modem functions....
yeah i tried looking for compatible firmware for NA but have had no luck.
Related
Please
I need XXJPH
without csc
to keep my 850mhz
If anyone can do for us?
From already thank you very much
*#*#4636#*#* click phone info, click menu button and select select radio band and finally select usa band (that will enable 850 and 1900 for both edge and 3g) or automatic.
Worked fine for me but eventually a CSC file will come out.
decepticon said:
*#*#4636#*#* click phone info, click menu button and select select radio band and finally select usa band (that will enable 850 and 1900 for both edge and 3g) or automatic.
Worked fine for me but eventually a CSC file will come out.
Click to expand...
Click to collapse
It does not work for me only works 1900MHz
and if I put another csc
gives me error
criskelo said:
It does not work for me only works 1900MHz
and if I put another csc
gives me error
Click to expand...
Click to collapse
May want to go back to 2.1 until a proper 2.2 build comes out with the proper CSC then if you are in a predominately 850 coverage area.
I am sure once the leaks start coming out for different regions we will get them.
I had the same problem on the i9000T.
The 850Mhz got disabled with JPH.
I flashed back to an official 2.1, updated CSC and got 850Mhz back.
Then flashed JPH back and retained 850Mhz.
clubtech said:
I had the same problem on the i9000T.
The 850Mhz got disabled with JPH.
I flashed back to an official 2.1, updated CSC and got 850Mhz back.
Then flashed JPH back and retained 850Mhz.
Click to expand...
Click to collapse
Where did you get your ROM at that gave you back the 850mhz? Can you post up the ROM so we can use it? My original i9000T ROM backup got messed up somehow.
Thanks!
Jouten said:
Where did you get your ROM at that gave you back the 850mhz? Can you post up the ROM so we can use it? My original i9000T ROM backup got messed up somehow.
Thanks!
Click to expand...
Click to collapse
Download firmware Canada 850mhz
http://www.samfirmware.com/WEBPROTECT-i9000.htm
criskelo said:
Download firmware Canada 850mhz
http://www.samfirmware.com/WEBPROTECT-i9000.htm
Click to expand...
Click to collapse
does the jph have spanish in swype? i was almost sure it did not (i ask cause you are from argentina, just like me )
EDIT: ok, maybe JP6 was the one without spanish in swype
Criskelo, I have an GT-i9000T, that lost 850 Band.
I flash with the Canada firmware, from WEBPROTECT.
pda:i9000ugjh2
phone i9000ugjh2
csc i9000bmcjh2
but i cant connect with movistar in hsdpa 850mhz. Only Edge
? whick may be the problem ?
Thanks
I know Telstra runs on UMTS 850Mhz in Australia, but at the moment it's also running alongside 3 on UMTS 2100Mhz (the more popular band).
My questions is what is the base firmware which has been loaded onto the phone? Is it the UK 2.21??? (which has bands 900/2100 covered) or is it another one?
Reason for asking is I've flashed back to UK 2.21 (don't ask why!) and now have found that I get my network reporting as "3Telstra" (which I'm guessing is UMTS 2100Mhz) versus what it used to report ("Telstra").
So question 2 then is if I'm running on 2100Mhz due to having the UK 2.21 sbf flashed, what should I flash to get my 850Mhz band back? Or how do i get 850 back?
TIA for any help all...
System version Blur_Version.2.26.0.MB525.Telstra.en.AU
Firmware version 2.1-update1
Baseband version EPU93ST2_U_03.03.00
Kernel version 2.6.29
Build number FRDNEM_U3_2.26.0
Try the following link to the telstra page to configure your defy for mms, and internet. I have used it many times myself after trying lots of different firmwares.
http://configure.telstra.com.au/telstra/index.jsp
You could also check this out,
http://forum.xda-developers.com/showpost.php?p=10023977&postcount=14
download link for a nandroid backup of the default Telstra. I have used this many times and flashed it over both 2.21 and 2.34 with no problems.
Cheers,
Scott
Here we are, I post the european config files for 850 / 1900 / 2100 network
You can use it on the RUTEM_U3_01.14.2 last deblured rom.
All you have to do is replace the folder in etc/system/
ATT
will those files work on ATT because of the 1900 and 850, or would I need the exact ATT version?
Yep , normaly they will work on ATT network, except for 2100 who is not present on your network. give a try.
If these files don't work , the best thing to do is reflash the original ATT rom or if you didn't change in your original rom,
and backup the frequency folder /etc/motorola/"bp_nvm_default" .
To do this you will need to room your device and pick up the folder with rootexplorer.
but normaly you won't have to do that because of the similar freQ
great!
ok, Ill try this with the newer de-blurred rom, because I can't seem to find the original att rom anywhere, hopefully this unbricks the phone!
nixonpjoshua said:
ok, Ill try this with the newer de-blurred rom, because I can't seem to find the original att rom anywhere, hopefully this unbricks the phone!
Click to expand...
Click to collapse
Here it is:
http://www.megaupload.com/?d=DIDRJSZ1
Please report us EVERYTHING on your AT&T Flipout.
Did you manage to unblur it?
Did you brick it? With which ROM?
Have you tried the modified recovery?
Best Regards.
Is there SBF available for the Rogers Canada branded Flipout?
Sent from my DROID2 GLOBAL
Does anybody have config files for British retail Flipout?
I've flashed RUTHEM_U3_01.14.2(Debranded ROM for Central Europe) which seems to work great, but I have some issues with signal reception I didn't have with the original ROM. I assume the reason is in band configuration, according to and-developers.com, my original ROM used 900/2100 and the new one uses 850/2100. Standard for my region is GSM 900, DCS 1800, UMTS 2100.
Thank you in advance.
GSM 900/2100 Configuration Files
I managed to get these files myself, so if you have UK retail Flipout and you encountered signal reception issues after flashing RUTEM_U3_01.14.2, these configs might help.
question
I from argentina , bands here according to http://www.mobileworldlive.com/maps/network.php?cid=3206&cname=Argentina
are 850/1900, but when i see for example france i found http://www.mobileworldlive.com/maps/network.php?cid=123&cname=France
i found it has 900/1800/2100, can i install U3_01.14.2 with the 850/1900/2100 config file??
thanks for your answeres
dalkor said:
I managed to get these files myself, so if you have UK retail Flipout and you encountered signal reception issues after flashing RUTEM_U3_01.14.2, these configs might help.
Click to expand...
Click to collapse
Thanks for these.
Where did you find them by the way and also are these from the latest uk rom?
Nice one
Acefx said:
Here we are, I post the european config files for 850 / 1900 / 2100 network
You can use it on the RUTEM_U3_01.14.2 last deblured rom.
All you have to do is replace the folder in etc/system/
Click to expand...
Click to collapse
hi,
I just installed RUTEM_U3_01.14.2 and would like to make it support 1900 network too with your conf files, however I can't find any /etc/system folder in my phone, only /System/etc but no bp_nvm folder inside
Where do I put your files ?
UPDATE:
found: /system/etc/motorola/bp_nvm_default/
Waiting for confirmation that this works with ATT...please let me know when someone finds out
dalkor said:
Does anybody have config files for British retail Flipout?
I've flashed RUTHEM_U3_01.14.2(Debranded ROM for Central Europe) which seems to work great, but I have some issues with signal reception I didn't have with the original ROM. I assume the reason is in band configuration, according to and-developers.com, my original ROM used 900/2100 and the new one uses 850/2100. Standard for my region is GSM 900, DCS 1800, UMTS 2100.
Thank you in advance.
Click to expand...
Click to collapse
I noticed the exact same thing, I have a European 900/2100 phone I'm using in Canada. My provider is 1900, so I never had 3G to begin with, but after flashing 1.14.2 my 2G reception weakened and EDGE turned to GPRS. I scared myself enough getting stuck at the Moto screen playing with basebands the first time, I think I'll wait a bit more before I go in for round two
suoko - Did copying these config files over improve 1900 signal? Did you have connectivity at all before, or was it just 2G, but after copying these new config files it is 3G?
kiwikonnections said:
suoko - Did copying these config files over improve 1900 signal? Did you have connectivity at all before, or was it just 2G, but after copying these new config files it is 3G?
Click to expand...
Click to collapse
my network uses 2100 only so 3g worked without modifications. I did this just in case I sell the phone
Hi
I can't fint the folder /etc/system... I looked into /system/etc, but I don't have a folder named GSM...
Suggestion? How can I check if the modded file are working?
Edit:
I'm very sorry! I missed the edit just three posts before mine... I got it!
MGA2009 said:
Here it is:
http://www.megaupload.com/?d=DIDRJSZ1
Please report us EVERYTHING on your AT&T Flipout.
Did you manage to unblur it?
Did you brick it? With which ROM?
Have you tried the modified recovery?
Best Regards.
Click to expand...
Click to collapse
Are you still keeping this file? Can you upload it to another site?
Thanks
Hello , the problem I'm having is that I can only access G "Edge". My phone was branded to telus (CANADA) carrier , but now is unbranded and has official sense 3.0 rom , using greek carrier cosmote phone supports 850/900/1800/ 1900 and UMTS /HSPA 850/1900 mhz. Any help ?
if you dont mind rooting your phone , then install another ROM ( custom or not) , and see the effect always a good solution
might work on other kernels/roms
cheers
Nothing you can do. The telus and inspire(us dhd) support different frequencies for 3g(850/1900) than europe(900/2100).
Only way to get 3g is to get the European dhd
Hello everybody,
I have a samsung I747M from Canada. I'm french and I'm using it here.
Data connexions are only in EDGE (the same as 2G). I want to have 3G data connexions. All the settings in the NPA are good.
I think the problem come from the CSC which is still the one attached to Canada (BMC).
All the firmwares are for Canada. I want to change the CSC (BMC now) to XEF (the one for France).
Does someone have an idea to fix this situation ?
Thank you and Merry Christmas !
PS : Sorry for my english...
You might have to carrier network unlock the phone.
Does the i747m support the carrier's 3g frequencies?
StoneyJSG said:
You might have to carrier network unlock the phone.
Click to expand...
Click to collapse
Thank you for your answer but my phone is already unlocked.
I'm using it in France with a local operator (Bouygues). Data connexions are only in 2G and not in 3G.
I think if I will change the CSC it will be good
audit13 said:
Does the i747m support the carrier's 3g frequencies?
Click to expand...
Click to collapse
I think so.. How can I know pleas ?
In network settings there are GSM, LTE etc
You can check here: http://willmyphonework.net/
audit13 said:
You can check here: http://willmyphonework.net/
Click to expand...
Click to collapse
I've checked and it works in 3G
I don't think it is a firmware problem because I took my s3 to London a couple of years ago. It was running stock bell firmware, network unlocked, and I was able to get 3G data connections without doing anything to the stock rom. Changing the Csc should not make a difference.