Related
Hello all!
First: I promise I searched the forums and google as hard as I could!
I'm running AOKP JB with CWM, although the problem was present on stock ICS from T-Mobile.
Symptoms: Computer and phone will refuse to acknowledge any connection (nothing shows up in Device Manager), except the phone will still charge. If I do the "remove the battery with USB plugged in" trick, the first time I do it, it will recognize an unknown device, but kies and adb won't recognize it. If I unplug it and plug it back in, it'll go back to not acknowledging any connection.
I previously programmed it (when I was still running stock ROM) via ADB via WiFi, but I need to be able to use ADB via USB. Besides, I can't seem to get ADB over WiFi anymore.
When I plug it into a different computer (Win7), it will, however, recognize my phone.
Earlier this year, before I ever tried programming via WiFi, it connected to my Win8 machine with no problem. I don't think it's a problem with the wifi setup though because the ROM was reinstalled and of course I've restarted ADB in USB mode in the months since...
What I've tried:
Reinstalling Kies
Reinstalling Samsung USB drivers
[^]Restarting the ADB server
Updating ADB
Trying different USB cables
Trying different USB ports
Toggling USB debugging
Toggling MTP mode
The UART thing from the dialer
Restarting the phone and the computer (of course)
Checking to see if my computer's USB drivers need to be updated
The android terminal command "setprop persist.sys.usb.config mass_storage,adb"
Pulling and replacing the battery while connected via USB
Crying in a corner
If anyone can help me, it'd be greatly appreciated! I'm all out of ideas and Google is no longer helpful =/
try to uninstall the drivers that are present anything samsung related to your drivers ... then connect the phone and let the process do its thing if you have the samsung drivers saved on your PC and the drivers still aint working update the drivers and then manually click where the drivers are to install them and hopefully it will work and when you tried MTP is it the only option it gives you no storage or anything ??... and is usb debugging on when you are trying all this ??
krazierokz said:
try to uninstall the drivers that are present anything samsung related to your drivers ... then connect the phone and let the process do its thing if you have the samsung drivers saved on your PC and the drivers still aint working update the drivers and then manually click where the drivers are to install them and hopefully it will work and when you tried MTP is it the only option it gives you no storage or anything ??... and is usb debugging on when you are trying all this ??
Click to expand...
Click to collapse
I tried on my work computer that didn't have any samsung drivers and when the "unknown device" dialog popped up it didn't do anything or install anything, nor did it show up in Device Manager. Unplugging and replugging it back in did not reproduce the dialog box. Togged USB Debugging and still no dialog box saying it recognized it.
The thing with the samsung drivers is that they're self installing so even if it popped up in Device Manager, I wouldn't be able to manually update the drivers =/
I tried MTP both with and without USB Debugging, although it also gives the option for PTP.
At this point do you think I should unroot and go back to stock? It's not been recognized on three computers now! =[
Are you using the stock cable? My computer wouldn't recognize mine without it.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
foltz61 said:
Are you using the stock cable? My computer wouldn't recognize mine without it.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Both the stock cable and a generic cable.
Similar problem
Similar problem as the OP. And hi guys, it's nice to be on these forums.
My device, when I plug it in using the stock cable, doesn't even charge. It doesn't show up in device manager, nor does it give me a notification, or say it's unsupported and bear that yellow icon. I have tried using different USB ports, I have tried the toggling USB debugging, I have tried restarting phone, computer, and taking out battery. I have tried that PDA/MODEM dialer trick. I am using 4.1.2 Jellybean, not rooted. (that WAS my goal,, until I hit this roadblock) I have not connected it to the computer in the past, it's relatively new. I'm thinking the cable is bust.
Any suggestions would be appreciated. It charges fine through a wall outlet plug, be it generic or stock.
so guys ive come to a conclusion i think its something in the samsung usb cables try getting yourself a blackberry usb cable , TRUST ME !!! ever since i got my phoness etc... tablet and yadi yadi samsung usb cables have always seemed to give me problems i think its because they are multi data/charging cables and when using the blackberry usb cable i have never ever once encountered a problem with any of my phones sd/storage problems do yourself a favor and pick up one of those cables and you will be golden !! if not then i guess im the only lucky one :LOL here you go http://www.amazon.com/Blackberry-Travel-Adapter-Micro-Cable/dp/B004VMVSYK/ref=pd_sim_cps_2 5 bucks!
Edit also one more test boot into recovery and click in the advanced menu and see if mount usb works for you in recovery mode ??
FIX (try using a generic cable)
I actually solved it on my own! After borrowing a generic cable from a friend it booted up! The Samsung cable was just not doing its thing.
yeah im telling you those cables they provide are JUNK!!! i only use my samsung to charge because they do that well but data they are str8 CRAP!! glad you got it up and going
OP
Hope OP will have the same luck as me...pray to the Android gods...
Lol:thumbup:
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Hello my fellow xda peeps, I recently got my Galaxy S3 fixed because of crazy charging problems, and had to replace the charging port. Now it charges fine, but why can't I sync to the PC with USB connection? There's no "Connected To Media Device" in the notifications, it only charges. I have tried different cables and have wiped cache in the stock recovery(not rooted), I have taken out the battery waited 30 seconds and put it back in, enabled USB debugging, disabled USB Debugging, dialed *#7284# and tried MODEM and PDA and have tried under USB Settings MTP + ADB and MTP, I have also tried different USB ports in the computer. I have reinstalled Kies Drivers and troubleshooted on Windows. I really want to root again.
-Any help is greatly appreciated!
-galaxys3world
galaxys3world said:
Hello my fellow xda peeps, I recently got my Galaxy S3 fixed because of crazy charging problems, and had to replace the charging port. Now it charges fine, but why can't I sync to the PC with USB connection? There's no "Connected To Media Device" in the notifications, it only charges. I have tried different cables and have wiped cache in the stock recovery(not rooted), I have taken out the battery waited 30 seconds and put it back in, enabled USB debugging, disabled USB Debugging, dialed *#7284# and tried MODEM and PDA and have tried under USB Settings MTP + ADB and MTP, I have also tried different USB ports in the computer. I have reinstalled Kies Drivers and troubleshooted on Windows. I really want to root again.
-Any help is greatly appreciated!
-galaxys3world
Click to expand...
Click to collapse
Hey, I just had my charging port replaced and i'm having the same issue with not being able to sync / connect to my computer. I was wondering if you ever found a solution.
Thanks!
Chris
Not sure if this works here, but works like a charm every time and not many people know about it but try it:
Boot Download Mode>Hit Up>Connect to PC>Windows should recognize and look for updates for the drivers>Check the status of the driver install Note: If everything is complete, continue>disconnect>remove battery then put back in>
boot normally> Connect to PC>Voila :laugh:
Hope this helps!
Hey guys,
Now, my Galaxy Note 2 was rooted. When I connected it with the USB cable to my PC the PC didn't recognize it (it used too, but then suddenly it stopped connecting). It still charges but no new device is detected. No Kies, no MTP, no Odin.
I didn't worry too much, because being rooted I could still do everything using the external sd card.
However then the ROM for Android 4.3 was leaked I stupidly installed the stock version. So, no root, and no capability to mess around with the phone.. I also have no viewable option in Settings to set the device connection to MTP, or PTP mode as usual, but maybe that's because of Android 4.3
I have bought a new USB flex part, opened it and replaced it but it still didn't work.
I download a version of phoneutils.apk and installed (because the one on Android 4.3 didn't have Qualcomm USB settings option) and choose the correct options, but still nothing.
Do you have any idea what may have gone wrong? Or what I can try to do?
I desperately want to root the thing.
Thank you very much! I appreciate any suggestion and reply.
Hi!
This might sound stupid but... have you tried a different USB cable? Or USB port? Sometimes this can solve these kind of issues. Take a look in your computer's Device Manager and see if you have any problems with the USB hub driver. Also try to connect using a different PC and see if that works.
You can try and boot in Download mode (Vol down + Home + Power) and see if ODIN sees the phone. If so, you can flash another stock firmware and see if your USB works then.
Yea tried all that! No success. /:
Phone goes into download mode but Odin does not recognize it..
Ruwin said:
Hi!
This might sound stupid but... have you tried a different USB cable? Or USB port? Sometimes this can solve these kind of issues. Take a look in your computer's Device Manager and see if you have any problems with the USB hub driver. Also try to connect using a different PC and see if that works.
You can try and boot in Download mode (Vol down + Home + Power) and see if ODIN sees the phone. If so, you can flash another stock firmware and see if your USB works then.
Click to expand...
Click to collapse
Hi friends
I am facing problem with my Galaxy Note 2.
Earlier when I first connected to PC it asked me whether I would like to use only as charging or for Media Transfer.
I choose Charging Only.
Now after automatic upgrading ( not rooted) I am not able to connect to my PC.
It only charges but I cannot use for Media Transfer, Even I cannot find where this option is.
After a lot of surfing in internet I changed pc, cable ( original), enabled USB debugging mode from developer options, enabled code *#7284#, *#0808# etc....
but the end result is same, All PC just says USB not recognized.
I have files in it which needs to be transferred so I don't want to be rooted or hard formatted.
Hope anyone can help.
Same...
Same problem....
Dear All
Sorry for bothering...
it was hardware problem, faulty IC.
I reapired it
Hello everybody,
I received my OP3 yesterday and I'm quite happy with my phone, but I'm having an worrying problem with the USB connection. Indeed, I cannot seem to get the USB connection working in MTP mode. In fact, I cannot get anything else working than charging mode.
Things I already tried :
- Enabling USB debugging
- 3 different cables (OP2, OP3, no brand)
- Manually choosing MTP mode in developper options
- 2 different computers
Maybe the most worrying thing is that the Windows device manager doesn't see any device when I connect the phone, not even a device with an error...
I'm really starting to think this is a hardware problem
Please, HELP ! :crying:
Isayaa said:
Hello everybody,
I received my OP3 yesterday and I'm quite happy with my phone, but I'm having an worrying problem with the USB connection. Indeed, I cannot seem to get the USB connection working in MTP mode. In fact, I cannot get anything else working than charging mode.
Things I already tried :
- Enabling USB debugging
- 3 different cables (OP2, OP3, no brand)
- Manually choosing MTP mode in developper options
- 2 different computers
Maybe the most worrying thing is that the Windows device manager doesn't see any device when I connect the phone, not even a device with an error...
I'm really starting to think this is a hardware problem
Please, HELP ! :crying:
Click to expand...
Click to collapse
I had the same issue with my MXP and still have it with my OP. Just can't seem to get my pc to recognize them as storage devices.
A workaround I have found is to boot into twrp, then their recognized immediately and can be used as an external storage device.
I also got 'charging only' mode when I first connected OP3 to my laptop but after changing the settings at developer options I could do the file transfers and all.
I hope some of your privacy setting isn't messing up with it because AFAIK it shouldn't be a hardware problem.
I have the same issue.
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
bruciebabie1963 said:
I have the same issue.
Click to expand...
Click to collapse
I turned off usb debugging and now my computer recognizes my device.
numbere said:
I had the same issue with my MXP and still have it with my OP. Just can't seem to get my pc to recognize them as storage devices.
A workaround I have found is to boot into twrp, then their recognized immediately and can be used as an external storage device.
Click to expand...
Click to collapse
Thing is I cannot unlock bootloader and install TWRP because the USB connection is needed for that
Beside, this is a 2 days old phone, I'm expecting it to work flawlessly...
Isayaa said:
Hello everybody,
I received my OP3 yesterday and I'm quite happy with my phone, but I'm having an worrying problem with the USB connection. Indeed, I cannot seem to get the USB connection working in MTP mode. In fact, I cannot get anything else working than charging mode.
Things I already tried :
- Enabling USB debugging
- 3 different cables (OP2, OP3, no brand)
- Manually choosing MTP mode in developper options
- 2 different computers
Maybe the most worrying thing is that the Windows device manager doesn't see any device when I connect the phone, not even a device with an error...
I'm really starting to think this is a hardware problem
Please, HELP ! :crying:
Click to expand...
Click to collapse
When you connect the phone, Marshmallow by default connects in charging mode.
- Swipe down and you will see USB for charging "Touch for more options"
- Select 'File Transfers'
Transfer files.
white43 said:
When you connect the phone, Marshmallow by default connects in charging mode.
- Swipe down and you will see USB for charging "Touch for more options"
- Select 'File Transfers'
Transfer files.
Click to expand...
Click to collapse
I don't get the pop-up, the phone really does not detect that it's connected to a computer.
Isayaa said:
I don't get the pop-up, the phone really does not detect that it's connected to a computer.
Click to expand...
Click to collapse
That sounds like a hardware problem.
I don't have developer USB debugging mode on or anything.
I have this issue with my op3. Just got it in the post today. My windows 10 pc bleeps when pugged in but does not load a drive. In device manager it shows up as the d drive but not in file explorer. Annoying!
My windows 7 (company laptop) recognised my phone first time and installed the drivers no problem. I had problems with my USB flash drive earlier today until I discovered the hidden enable OTG toggle.
Sent from my ONEPLUS A3003 using Tapatalk
Isayaa said:
Hello everybody,
I received my OP3 yesterday and I'm quite happy with my phone, but I'm having an worrying problem with the USB connection. Indeed, I cannot seem to get the USB connection working in MTP mode. In fact, I cannot get anything else working than charging mode.
Things I already tried :
- Enabling USB debugging
- 3 different cables (OP2, OP3, no brand)
- Manually choosing MTP mode in developper options
- 2 different computers
Maybe the most worrying thing is that the Windows device manager doesn't see any device when I connect the phone, not even a device with an error...
I'm really starting to think this is a hardware problem
Please, HELP ! :crying:
Click to expand...
Click to collapse
I had the same problem.
What I did to fix it was the following steps:
- Disable USB debugging in developer options
- Choose PTP mode in developer options
- Choose MTP mode in developer options
- And Done, my PC now recognize the phone in MTP mode
what i do to fix this
- disable OEM unlocking
- disable developer options
- plug USB (wait for drivers install)
- enable developer options
- enable USB debuging
Gah, having similar problems!
Have tried all the workarounds suggested here, but whenever I plug it in on MTP mode it just shows me the OnePlus Drivers CD Drive.
I have installed the drivers (multiple times) but Windows 10 just won't see the phone when I plug it on MTP mode, just shows me the Drivers CD Drive every single time.
It's recognised as PTP no problems, but no luck on MTP!
Any ideas?
(Unlocked, not yet rooted, on stock firmware)
op3
Hi, i have the same problem, has anyone found any solution for this? It's starting to get pretty irritating... :/
Are you sure youre choosing file transfer mode from the notification area where by default its selected as charging only.
Try this
Hi Guys,
Try halfway inserting the USB cable into your PC, I was having the same frustrating problem and noticed that did the trick for me.
Still trying to figure out why the connectors are not responding when the USB cable is fully inserted, I admit that this is my first device using USB Type-C.
strange
The problem is not getting any better, i simply cannot get windows to even recognise my phone in device manager. Tried it in adb and fastboot, also tried a hard reset but no solution.. I requested a repair from oneplus because i think it cannot be anything else than a hardware problem.
guys i found solution on op3 forum... it worked 4 me with win 10 enterprise... download and install update from here... https://support.microsoft.com/en-us/kb/3099229
This worked fo me: (i'm using Win10)
Device manager, and find "MTP device" then driver update, find on computer, and select MTP USB Composit Device. It works with enabled Debugging, OEM unlock is on too. :good:
white43 said:
When you connect the phone, Marshmallow by default connects in charging mode.
- Swipe down and you will see USB for charging "Touch for more options"
- Select 'File Transfers'
Transfer files.
Click to expand...
Click to collapse
Solved my problem