Develop Bugs

[Q] believed soft brick and more

OK for start i rooted my gs2 and installed cm9 update-cm-9-20120416-SNAPSHOT-epic4gtouch-alpha3-signed. this loaded and was running just fine. but then I noticed when trying to install update-cm-9-20120512-NIGHTLY-galaxys2-signed i had lost my cwm recovery and decided to investigate and experiment.(got an answer on bold issue) (bad Idea) So then I re flashed cwm recovery and loaded cm9 5/12 it loaded but i had no data/WiFi so i booted back into cwm recovery and formatted everything (i think this is were i messed up). I can still get into down loader but now my computer and Odin wont recognize when I connect my phone. I can get into cwm recovery but it cant mount my SD card and says there is nothing in internal storage. I have uninstalled kies and all Samsung related drivers/software. rebooted computer, reinstalled kies and software and still nothing.Any help would be great and any more information needed I will do my best.
So now, that is about everything I can think of. So I guess my main question would be How do I get my phone and computer to talk to each other again and most of all get it back up and running.
Also just for the record im not a complete noob I was a ROM addict with my transform. and I have searched forum after forum and have had no luck finding the info i need. which is why i am creating a new post.

yeehaw1130 said:
OK for start i rooted my gs2 and installed cm9 update-cm-9-20120416-SNAPSHOT-epic4gtouch-alpha3-signed. this loaded and was running just fine. but then I noticed when trying to install update-cm-9-20120512-NIGHTLY-galaxys2-signed i had lost my cwm recovery and decided to investigate and experiment.(got an answer on bold issue) (bad Idea) So then I re flashed cwm recovery and loaded cm9 5/12 it loaded but i had no data/WiFi so i booted back into cwm recovery and formatted everything (i think this is were i messed up). I can still get into down loader but now my computer and Odin wont recognize when I connect my phone. I can get into cwm recovery but it cant mount my SD card and says there is nothing in internal storage. I have uninstalled kies and all Samsung related drivers/software. rebooted computer, reinstalled kies and software and still nothing.Any help would be great and any more information needed I will do my best.
So now, that is about everything I can think of. So I guess my main question would be How do I get my phone and computer to talk to each other again and most of all get it back up and running.
Also just for the record im not a complete noob I was a ROM addict with my transform. and I have searched forum after forum and have had no luck finding the info i need. which is why i am creating a new post.
Click to expand...
Click to collapse
First question, which version of CWM were you using?
Second question, when you say that your computer didn't respond is it just not reading as an extra drive? If you have your sound on does the computer make the new hardware detected ding sound?

Looks like you flashed the intl version galaxy s2 cm9, this phone is usually listed as e4gt or epic touch in rom files not galaxy 2 so more than likely your USB is corrupted and no longer will be recognized by your PC which makes your phone FUBAR
Sent from my SPH-D710 using xda premium

thanks for the speedy response. I am using cwm 5.5.0.4 and No noise at all. The computer ain't regerstering that i plugged any device in via usb. I tryed different cords and nothing. I did try different usb devices to ensure it wasnt my usb and they worked just fine. it was working not a problem then what ever i did to my phone it stopped. My internal storage says there are no files. dont remember if i mentioned that before.

yeehaw1130 said:
thanks for the speedy response. I am using cwm 5.5.0.4 and No noise at all. The computer ain't regerstering that i plugged any device in via usb. I tryed different cords and nothing. I did try different usb devices to ensure it wasnt my usb and they worked just fine. it was working not a problem then what ever i did to my phone it stopped. My internal storage says there are no files. dont remember if i mentioned that before.
Click to expand...
Click to collapse
K. Unfortunately it is a hard brick. You will probably need to look at getting a JTAG service. Other than that it's pretty much gone.
Sorry!

Yup you flashed a rom for the intl gs2, next time read a little more carefully anything with gs2 or galaxy s2 is not for the epic touch. 2 completely different devices and anything for the galaxy s2 will Bork the epic touch. Jtag is your only hope, and I'm pretty sure it can fix your version of a brick since it can still boot. I wouldn't try doing anything else cuz if you get the blue light of death there is no hope aside from getting it replaced at that point. Mobile tech videos website will have more info on jtag for you, it'll cost around $50
Sent from my SPH-D710 using xda premium

thank you I will go drop it in a bucket of water and get insurance claim on it. thank you for the help

Just take it to Sprint and play dumb! Seems like a lot of folks are getting them replaced for free or 35 bucks tops.

I can try that to I actually tried zapping it with a 6.5mill volt tazer with a wire ran in through usb port but didnt work haha. Only issue I see is you can still boot to recovery and download and recovery is cwm recovery. I was trying to figure out how to just fry the motherboard and then play dumb.

yeehaw1130 said:
thank you I will go drop it in a bucket of water and get insurance claim on it. thank you for the help
Click to expand...
Click to collapse
Jtag is cheaper than ins deductible and if they can't fix it the refund your money so I'd give it a shot first
Sent from my SPH-D710 using xda premium

I would not drop it in a bucket of water!!! When you take it to sprint the first thing they do is check for water damage. They know because there are stickers on the inside of the phone that change colors when they come in contact with water. Trust me, I know.

USB Connection not working at all after bad flash

So here's the story:
Stock Ice Cream Sandwich on device.
Did not use... Super One Click. Pretty much just skipped rooting? IDK, was in a hurry, didn't take necessary precautions.
Everything seems to work like a charm...
1) Downloaded KIES to install drivers.
2) Used ODIN to flash Clockwork Recovery Mod (getting a triangle now when booting, but nothing loads)
3) Used ODIN to flash I9100 ICS but it fails.
4) "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." Getting this message. Always on.
5) Got to Download Mode (ODIN), but any computer I plug the USB into does not even start a proper connection. I believe there is electricity flowing, but no data/information being sent/received from either end.
(I could just clean everything up and try reflashing some things, but now my device won't even properly connect to ANY computer with the drivers all properly installed...)
6) Post in xda forums and pray to the Android Brick Gods.
Please... help. I am just wondering why any USB connection isn't working and how to fix it... is my kernel messed up? Did this Galaxy S2 (from Sprint) have the Brick Bug where the /data gets corrupted after a flash... and, finally, does this mean my phone is bricked? I am about to file an insurance claim and pay that $100 deductible :/

ekstatic said:
So here's the story:
Stock Ice Cream Sandwich on device.
Did not use... Super One Click. Pretty much just skipped rooting? IDK, was in a hurry, didn't take necessary precautions.
Everything seems to work like a charm...
1) Downloaded KIES to install drivers.
2) Used ODIN to flash Clockwork Recovery Mod (getting a triangle now when booting, but nothing loads)
3) Used ODIN to flash I9100 ICS but it fails.
4) "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." Getting this message. Always on.
5) Got to Download Mode (ODIN), but any computer I plug the USB into does not even start a proper connection. I believe there is electricity flowing, but no data/information being sent/received from either end.
(I could just clean everything up and try reflashing some things, but now my device won't even properly connect to ANY computer with the drivers all properly installed...)
6) Post in xda forums and pray to the Android Brick Gods.
Please... help. I am just wondering why any USB connection isn't working and how to fix it... is my kernel messed up? Did this Galaxy S2 (from Sprint) have the Brick Bug where the /data gets corrupted after a flash... and, finally, does this mean my phone is bricked? I am about to file an insurance claim and pay that $100 deductible :/
Click to expand...
Click to collapse
3) Used ODIN to flash I9100 ICS but it fails.
this is your problem. you need to follow directions, sorry, you have an sph-d710, not an I9100... you borked your bootloader... your options at this point are $50 jtag or $100 insurance, sorry... in the future, never flash I9100 roms, this is what will happen every time

cp320703 said:
3) Used ODIN to flash I9100 ICS but it fails.
this is your problem. you need to follow directions, sorry, you have an sph-d710, not an I9100... you borked your bootloader... your options at this point are $50 jtag or $100 insurance, sorry... in the future, never flash I9100 roms, this is what will happen every time
Click to expand...
Click to collapse
Yep, this is what I thought.
Thanks.
And what is jtag lol

ekstatic said:
Yep, this is what I thought.
Thanks.
And what is jtag lol
Click to expand...
Click to collapse
http://mobiletechvideos.mybigcommerce.com/samsung-epic-4g-touch-jtag-brick-repair/

Thanks, a lot, man. Would you say this is a much better option versus the insurance claim..?

ekstatic said:
Thanks, a lot, man. Would you say this is a much better option versus the insurance claim..?
Click to expand...
Click to collapse
6 in one, half dozen in the other... you have a brick that is fixable via jtag, so if you want to save a few bucks on insurance it'll get you a working phone, if however you're for any reason dissatisfied with your phone (scratches, anything else not working, etc...) might as well just make the insurance claim... josh, the dude that's mobile tech videos, post on xda all the time, cant remember his user name though, he's a good dude, his service is legit... the only thing he cant fix is emmc bug brick, which does not apply to you

cp320703 said:
6 in one, half dozen in the other... you have a brick that is fixable via jtag, so if you want to save a few bucks on insurance it'll get you a working phone, if however you're for any reason dissatisfied with your phone (scratches, anything else not working, etc...) might as well just make the insurance claim... josh, the dude that's mobile tech videos, post on xda all the time, cant remember his user name though, he's a good dude, his service is legit... the only thing he cant fix is emmc bug brick, which does not apply to you
Click to expand...
Click to collapse
Yeah, I just ordered the jtag from the site... and it is a brand new phone so there are no scratches or anything really, I am fine with sending it into him and not doing insurance. Also, I don't think I have eMMC Bug Brick, but would there still be any possibility that I do?

ekstatic said:
Yeah, I just ordered the jtag from the site... and it is a brand new phone so there are no scratches or anything really, I am fine with sending it into him and not doing insurance. Also, I don't think I have eMMC Bug Brick, but would there still be any possibility that I do?
Click to expand...
Click to collapse
nope, your problem is that fact you flashed an I9100 rom...

[Q][ASAP]Is this a soft brick or a hard brick?

Ok, I have spent a really long time figuring out where to post this, but I still can't figure it out. Please forgive me if this is the improper place.
Please mind that I have looked at similar hard vs soft brick threads, and tried all of the advice given, but nothing has worked yet.
To start, I have a Samsung Galaxy S II from Sprint. The Epic 4G Touch, Model SPH-D710. I am on a MacBook Pro running 10.7.5 OSX. Recently, I followed the steps as listed by h tt p:// epic4gtouchroot .com /epic-4g-touch-root/ how-to-root-epic-4g-touch-on-mac-or-linux/
The Terminal went through the entire process and said it was successful. I thought 'Wow! That was easy!' However, upon rebooting my phone, it never booted past the splash screen which showed "Samsung Galaxy SII GT-I9100" with a yellow triangle at the bottom. At this point I could access Download mode, Recovery mode, this splash screen, and the charging battery that is shown when it is charging and powered off.
I was so confused so I spent about 3 hours on xda looking for an answer. Next, I downloaded Odin and packaged it for Mac. Then I downloaded the Samsung drivers just in case, and the stock ROM for my particular phone. I went through and tried to use Odin. Much to my dismay, Odin would not recognize my phone at all.
So then, I downloaded a .zip file containing the Official Samsung ROM, and put it on my internal sdcard. Under ClockworkMod, I wiped cache, dalvik cache, and wiped all user data. Then, I applied the .zip file using the option in CWM, and it said that it was successful. However, upon rebooting, it went back to the same screen with the yellow triangle.
Next, I downloaded the CF root, and tried to apply it the same way through CWM. Again a fail. However, now upon rebooting to splash screen, it would progressively turn from a black/gray screen to a white screen. Once it got to the white screen, it stopped and stayed there for about an hour. Then it died.
I tried to boot to Download mode but it says that the battery is too low. So now I am trying to charge it. However, it tries to load the charging battery icon that is normally shown when charging a powered off phone, and flashes to black. From this black screen it again slowly turns gray then white. Once it reaches the white screen, it turns back to the charging icon, and starts the stupid cycle over again. Its been doing that for the past 30 minutes.
UPDATE: My battery is not charging AT ALL. Whether plugged in to computer or wall it continues the cycle.
UPDATE 2: I made a video so that you can see what the phone actually does. I still can't post links, so please remove the spaces. http :// youtu .be /4LW60EknFWw

Remove the battery first, then try charging it. After, get windows onto your Mac or borrow a friend's, and use the windows Odin to get back to stock.
Sent from my SAMSUNG-SGH-I747 using xda premium

christykientzler said:
Ok, I have spent a really long time figuring out where to post this, but I still can't figure it out. Please forgive me if this is the improper place.
Please mind that I have looked at similar hard vs soft brick threads, and tried all of the advice given, but nothing has worked yet.
To start, I have a Samsung Galaxy S II from Sprint. The Epic 4G Touch, Model SPH-D710.
<snip>
Click to expand...
Click to collapse
You're in the wrong forum. This is currently posted in the i9100 forums. You want the Epic 4G Touch forum.
EDIT to add:
To clarify - the Epic 4G Touch is a CDMA phone, and the GT-I9100 is a GSM phone which doesn't even work on Sprint's network.
So according to this:
christykientzler said:
Recently, I followed the steps as listed by http://epic4gtouchroot.com/epic-4g-touch-root/how-to-root-epic-4g-touch-on-mac-or-linux/
The Terminal went through the entire process and said it was successful. I thought 'Wow! That was easy!' However, upon rebooting my phone, it never booted past the splash screen which showed "Samsung Galaxy SII GT-I9100" with a yellow triangle at the bottom. At this point I could access Download mode, Recovery mode, this splash screen, and the charging battery that is shown when it is charging and powered off.
Click to expand...
Click to collapse
You apparently flashed something for the GT-I9100 onto your Epic 4G Touch SPH-D710. If you actually did follow the steps at http://epic4gtouchroot.com/epic-4g-touch-root/how-to-root-epic-4g-touch-on-mac-or-linux/ properly, this should not have happened. What exactly did you download and flash? Because if you followed steps for an Epic 4G Touch, then you would not have downloaded and flashed something that would alter your bootscreen to read GT-I9100.
You MIGHT have been at a recoverable spot at this point, until:
christykientzler said:
So then, I downloaded a .zip file containing the Official Samsung ROM, and put it on my internal sdcard. Under ClockworkMod, I wiped cache, dalvik cache, and wiped all user data. Then, I applied the .zip file using the option in CWM, and it said that it was successful. However, upon rebooting, it went back to the same screen with the yellow triangle.
Next, I downloaded the CF root, and tried to apply it the same way through CWM. Again a fail. However, now upon rebooting to splash screen, it would progressively turn from a black/gray screen to a white screen. Once it got to the white screen, it stopped and stayed there for about an hour. Then it died.
Click to expand...
Click to collapse
By my count, that's you flashing 3 things meant for an GT-I9100 to an SPH-D710.
You're probably out of luck at this point, but again, check in the Epic 4G Touch forum. Maybe someone there can help you, but I wouldn't hold my breath. You might have some luck trying to get a warranty exchange at a Sprint store, if they can't get your phone to boot and see exactly how bad you buggered it. But I wouldn't hold my breath on this, either.

Oh my goodness...
ctomgee said:
You're in the wrong forum. This is currently posted in the i9100 forums. You want the Epic 4G Touch forum.
EDIT to add:
To clarify - the Epic 4G Touch is a CDMA phone, and the GT-I9100 is a GSM phone which doesn't even work on Sprint's network.
So according to this:
You apparently flashed something for the GT-I9100 onto your Epic 4G Touch SPH-D710. If you actually did follow the steps at http://epic4gtouchroot.com/epic-4g-touch-root/how-to-root-epic-4g-touch-on-mac-or-linux/ properly, this should not have happened. What exactly did you download and flash? Because if you followed steps for an Epic 4G Touch, then you would not have downloaded and flashed something that would alter your bootscreen to read GT-I9100.
You MIGHT have been at a recoverable spot at this point, until:
By my count, that's you flashing 3 things meant for an GT-I9100 to an SPH-D710.
You're probably out of luck at this point, but again, check in the Epic 4G Touch forum. Maybe someone there can help you, but I wouldn't hold my breath. You might have some luck trying to get a warranty exchange at a Sprint store, if they can't get your phone to boot and see exactly how bad you buggered it. But I wouldn't hold my breath on this, either.
Click to expand...
Click to collapse
Oh my goodness... I knew I really had screwed the pooch on this one D:
Thanks for letting me know that I really am in a world of trouble. I had thought that GT-I9100 was a type of SPH-D710.
Also I apologize for the incorrect post location. Again, I hadn't understood the difference.
Do you think if I could charge up the battery, and get it into download mode with a jig, I might be able to use OneClick UnBrick? Or some other method?

christykientzler said:
Oh my goodness... I knew I really had screwed the pooch on this one D:
Thanks for letting me know that I really am in a world of trouble. I had thought that GT-I9100 was a type of SPH-D710.
Also I apologize for the incorrect post location. Again, I hadn't understood the difference.
Do you think if I could charge up the battery, and get it into download mode with a jig, I might be able to use OneClick UnBrick? Or some other method?
Click to expand...
Click to collapse
I have no idea. The two phones are different enough that any advice I give you would be invalid.
My suggestion about going to the Epic 4G Touch forum to ask for help there still stands. You're much more likely to find helpful advice and valid files for your particular device there. Do not use any more guides or download any more files from the I9100 forums.
That said, it looks like you may have tried either flashing a GT-I9100 bootloader or .pit file to your phone, which REALLY would have screwed the pooch, yes. If you can't get help in the Epic 4G Touch forums, I'd just take it to a Sprint store and tell them that a Kies update screwed your phone up.

TLDR
There is no such thing as a "Soft" or "Hard" brick, Your device is either bricked or it isnt, simple as that.
If you can get into download or recovery and use them your device is not bricked.

Will do
ctomgee said:
I have no idea. The two phones are different enough that any advice I give you would be invalid.
My suggestion about going to the Epic 4G Touch forum to ask for help there still stands. You're much more likely to find helpful advice and valid files for your particular device there. Do not use any more guides or download any more files from the I9100 forums.
That said, it looks like you may have tried either flashing a GT-I9100 bootloader or .pit file to your phone, which REALLY would have screwed the pooch, yes. If you can't get help in the Epic 4G Touch forums, I'd just take it to a Sprint store and tell them that a Kies update screwed your phone up.
Click to expand...
Click to collapse
Ok :good: Will do. I was wondering what I'd tell them if I went to a Sprint store Thanks again.

TheATHEiST said:
TLDR
There is no such thing as a "Soft" or "Hard" brick, Your device is either bricked or it isnt, simple as that.
If you can get into download or recovery and use them your device is not bricked.
Click to expand...
Click to collapse
Lol?
Softbrick is corrupted system files which result in a bootloop.
Hardbrick is a dead phone that can be fixed with a Jtag or M/B replacement...
Sent from my GT-I9100

Again, there is no such thing as a "soft brick". There is just "bricked" and the term is used too loosely by n00bs.
If you can simply re-flash a rom your device is not bricked at all.
"Soft brick" is just a n00b term that is used because they think their device is bricked if they can't get it to boot.
Your device is only "bricked" if all you can do is JTAG or mobo replace.
Sent from my GT-I9100 using xda premium

ctomgee said:
I have no idea. The two phones are different enough that any advice I give you would be invalid.
My suggestion about going to the Epic 4G Touch forum to ask for help there still stands. You're much more likely to find helpful advice and valid files for your particular device there. Do not use any more guides or download any more files from the I9100 forums.
That said, it looks like you may have tried either flashing a GT-I9100 bootloader or .pit file to your phone, which REALLY would have screwed the pooch, yes. If you can't get help in the Epic 4G Touch forums, I'd just take it to a Sprint store and tell them that a Kies update screwed your phone up.
Click to expand...
Click to collapse
boki9999 said:
Lol?
Softbrick is corrupted system files which result in a bootloop.
Hardbrick is a dead phone that can be fixed with a Jtag or M/B replacement...
Sent from my GT-I9100
Click to expand...
Click to collapse
Is there a one-stop resource for "Jtag or M/B replacement"? I'm having trouble searching forums for some reason, otherwise I would look for it myself.

You need to get it into download mode and then reflash a ROM appropriate for your device. Your phone isn't bricked - but if you fail to get it working again and have to resign to using it purely as a surface to sniff your cocaine off, then you have only yourself to blame.

postfatal said:
You need to get it into download mode and then reflash a ROM appropriate for your device.
Click to expand...
Click to collapse
Thank you, will do.
postfatal said:
Your phone isn't bricked - but if you fail to get it working again and have to resign to using it purely as a surface to sniff your cocaine off, then you have only yourself to blame.
Click to expand...
Click to collapse
LMAO, that's true. I don't blame anyone but myself for my mistakes.

If you hadnt understood the difference then why did you decide one day to go I to your phone and per form operations that are completely unknown to you? Do you ipen up your cars engines and place honda parts into your ford Fiesta?
Sent from my SGH-T889 using Tapatalk 2

Curiousity killed the cat...
ssCISengineer said:
If you hadnt understood the difference then why did you decide one day to go I to your phone and per form operations that are completely unknown to you? Do you ipen up your cars engines and place honda parts into your ford Fiesta?
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Because I am curious. This is where it often times gets me, but I like to learn new things by doing. In my eyes it's usually worth the risk. I will admit this was a stupid mistake, but I have certainly learned a lot about rooting in the process

Wow. So, hopefully by now you are in the correct forum. And hopefully have downloaded the appropriate Odin tar file to restore your phone properly. Get that at the dev section of E4GT. Charge that battery in a different phone if you have to. Get into Odin mode and run Odin from a PC (Heimdall for macs?), if the PC does not recognize your phone, its probably the cable. If Odin starts but then fails half way through, its probably the cable. BTW, check out SFHubs Odin-one clicks for your phone, probably the easiest way to restore a clean, new rom.
And in the future, be more curious before you act. Read read read.
Good luck.

Thank you
Dr. Fed said:
Wow. So, hopefully by now you are in the correct forum. And hopefully have downloaded the appropriate Odin tar file to restore your phone properly. Get that at the dev section of E4GT. Charge that battery in a different phone if you have to. Get into Odin mode and run Odin from a PC (Heimdall for macs?), if the PC does not recognize your phone, its probably the cable. If Odin starts but then fails half way through, its probably the cable. BTW, check out SFHubs Odin-one clicks for your phone, probably the easiest way to restore a clean, new rom.
And in the future, be more curious before you act. Read read read.
Good luck.
Click to expand...
Click to collapse
Yes I got to the correct forum.I still don't know which file to download. Nobody has bothered to point me in the right direction. Considering what I did to it last time with what I thought was the correct file, any direction would be appreciated. :/ I'll definitely ask in the E4GT forums. I'm currently working on getting a charged up battery, but I won't be able to do so until next Friday. I've looked into OneClick UnBrick. When I get the charged battery, I will definitely use a more reliable cord. XP I will definitely research more next time. In fact I might not mess with it at all!
Thank you for your help!

christykientzler said:
Yes I got to the correct forum.I still don't know which file to download. Nobody has bothered to point me in the right direction. Considering what I did to it last time with what I thought was the correct file, any direction would be appreciated. :/ I'll definitely ask in the E4GT forums. I'm currently working on getting a charged up battery, but I won't be able to do so until next Friday. I've looked into OneClick UnBrick. When I get the charged battery, I will definitely use a more reliable cord. XP I will definitely research more next time. In fact I might not mess with it at all!
Thank you for your help!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1903252
If you can get into Odin mode (on a PC preferably) , download one of these files. I recommend the latest official ICS build. Read the op carefully. That will return you back to stock. All your data is gone,, but hopefully you've always backed up your contacts to Google. The play store will have your app history.

Wait what..?
Dr. Fed said:
http://forum.xda-developers.com/showthread.php?t=1903252
If you can get into Odin mode (on a PC preferably) , download one of these files. I recommend the latest official ICS build. Read the op carefully. That will return you back to stock. All your data is gone,, but hopefully you've always backed up your contacts to Google. The play store will have your app history.
Click to expand...
Click to collapse
I see that the latest is FI27. The three files shown are OneClick.exe, a zip file, and an unrooted TAR file. From those I'm assuming that OneClick.exe is a windows application that goes in and puts your phone back to the ICS build with one click? This method would be the simplest, except for the fact I have a Mac. Would the time taken to repackage it be worth it or would one of the other two options be better? And the zip file. Would I be able to put that on my internal SD card and flash it through CWM? Or would I unzip it and flash through heimdall. As for the TAR file, I am unfamiliar with this, and am not sure how this file would be utilised.
The last time I tried to understand a concept on my own, I ended up with a bricked phone so please forgive me for asking so many questions, I just don't want to mess it up a second time.
As for the data, yes it is gone. DX Yes I backed up contacts *phew*. I had a feeling going into this that I should back up something.

christykientzler said:
I see that the latest is FI27. The three files shown are OneClick.exe, a zip file, and an unrooted TAR file. From those I'm assuming that OneClick.exe is a windows application that goes in and puts your phone back to the ICS build with one click? This method would be the simplest, except for the fact I have a Mac. Would the time taken to repackage it be worth it or would one of the other two options be better? And the zip file. Would I be able to put that on my internal SD card and flash it through CWM? Or would I unzip it and flash through heimdall. As for the TAR file, I am unfamiliar with this, and am not sure how this file would be utilised.
The last time I tried to understand a concept on my own, I ended up with a bricked phone so please forgive me for asking so many questions, I just don't want to mess it up a second time.
As for the data, yes it is gone. DX Yes I backed up contacts *phew*. I had a feeling going into this that I should back up something.
Click to expand...
Click to collapse
The one clicks are full "images" flashed through Odin. I recommend this because a one click will reflash your stock rom, modem, and recovery partition. This is what you need to do to repair your phone. If you try to flash something in recovery, it will repair your rom but not necessarily your modem/radio/firmware, and this could be a problem. I'm not sure exactly what you flashed before, so I think its best if you fix it all with a One Click.
As far as using a Mac goes, I am not sure. I'll look into it, you should too. Odin used to be only for PCs, Heimdall for Macs. Maybe its changed now?
---------- Post added at 08:30 PM ---------- Previous post was at 08:19 PM ----------
You must have some schmo friend that will let you borrow his or her PC laptop for 10 minutes. Install Odin , install the proper drivers. Go into Odin mode, connect phone, once recognized... click.
Look up QBKing77 on YouTube, search on YouTube "QBking77 Epic 4g Touch" and you will see instructional videos with appropriate download links.

Why have you lot continued to answer this thread ? It's in the wrong place. More to the point, why hasn't anyone asked mods to move it to Epic 4G Q&A ? (Which I've just done)

ROOT FAIL HELP PLEASE probably wrong spot but i'm new to android and i am panicking

i have a new nexus 7 2013 and i messed up big time im no good with all this adb stuff i unlocked it rooted. wouldnt boot. went in team win recovery project and somehow ended up deleting the os i cant get the computer to recognize the device to install the os if thats even possible or if i even could find out how. the computer just calls it flo and says i need to update the driver which it is or i culdnt of rooted(failed)... thanks any help is much appreciated. some on recommended to mount but cant get it to connect to computer.

UTubeMeBeach said:
i have a new nexus 7 2013 and i messed up big time im no good with all this adb stuff i unlocked it rooted. wouldnt boot. went in team win recovery project and somehow ended up deleting the os i cant get the computer to recognize the device to install the os if thats even possible or if i even could find out how. the computer just calls it flo and says i need to update the driver which it is or i culdnt of rooted(failed)... thanks any help is much appreciated. some on recommended to mount but cant get it to connect to computer.
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=2381582

http://goo.gl/lF0HEC
This is the driver you need to install to use ADB while in recovery which is different to the one for Fastboot and ADB while booted.

Perhaps this is what you are facing?: http://forum.xda-developers.com/showthread.php?t=2380913 The fact that you lost the OS leads me to believe so. Match the thread to your problem, however. If the information in the thread I linked to doesn't match your issue, then your best bet would be the one-click factory recovery mentioned earlier in the thread. Best of luck, from one novice, shaky rooter to another!

thetechaddict10 said:
Perhaps this is what you are facing?: http://forum.xda-developers.com/showthread.php?t=2380913 The fact that you lost the OS leads me to believe so. Match the thread to your problem, however. If the information in the thread I linked to doesn't match your issue, then your best bet would be the one-click factory recovery mentioned earlier in the thread. Best of luck, from one novice, shaky rooter to another!
Click to expand...
Click to collapse
OMG if this works ill pm you and tell you

thetechaddict10 said:
Perhaps this is what you are facing?: http://forum.xda-developers.com/showthread.php?t=2380913 The fact that you lost the OS leads me to believe so. Match the thread to your problem, however. If the information in the thread I linked to doesn't match your issue, then your best bet would be the one-click factory recovery mentioned earlier in the thread. Best of luck, from one novice, shaky rooter to another!
Click to expand...
Click to collapse
omg gimme your paypal email?? you saved my ass dude that worked perfect id be glad to pay you a couple dollars and thanks for everyone else who helped

UTubeMeBeach said:
omg gimme your paypal email?? you saved my ass dude that worked perfect id be glad to pay you a couple dollars and thanks for everyone else who helped
Click to expand...
Click to collapse
If you insist, there should be a "Donate to Me" box next to my information on the left.

I had the same problem. Got stuck with no OS installed, USB debugging disabled, and no ROM I could flash. I was scared ****less but I ended up fixing it with a restore program.
Glad you got it fixed.

I learned how to unlock, root, flash custom kernels with my old nexus 7 before I attempted on my new nexus 7. Didn't want to make an expensive mistake. I looked at things here last year when I got my first n7, got confused and didn't attempt it. Now, I definitely won't go back to just stock. Hope you get it all sorted out! It was definitely scary for me the first time.
Sent from my Nexus 7 using Tapatalk 4

I don't think I've ever heard of a case where someone permanently soft-bricked their device.
This irrational fear of "bricking" your device if you do something wrong needs to stop.
If your device gets soft-bricked, just flash the stock images - fixes it every time.

Geodude074 said:
I don't think I've ever heard of a case where someone permanently soft-bricked their device.
This irrational fear of "bricking" your device if you do something wrong needs to stop.
If your device gets soft-bricked, just flash the stock images - fixes it every time.
Click to expand...
Click to collapse
It's mainly the word "brick" that gets on my nerves.
Most of these are really just bootloops or boot hangs. My last one was the latter (and a little unsettling, I'll admit). Turns out that trying to flash a root zip before you've signed into the tablet at least somewhere to create the sdcard directories just leads to a headache for me.

[Q] Hard Bricked D851

I bricked my T Mobile G3 D851 by flashing Dark Knight 5.0 rom that was in this thread. I didn't think much of it because normally roms are in the right places in xda, I understand its my fault and there is no one to blame but myself. I just need some help restoring it. It does not turn on at all. I plugged it into the computer however, it showed some life. My computer was installing the drivers automatically but it fails. So there has to be a way to fix this right??

Mr_gmoney16 said:
I bricked my T Mobile G3 D851 by flashing Dark Knight 5.0 rom that was in this thread. I didn't think much of it because normally roms are in the right places in xda, I understand its my fault and there is no one to blame but myself. I just need some help restoring it. It does not turn on at all. I plugged it into the computer however, it showed some life. My computer was installing the drivers automatically but it fails. So there has to be a way to fix this right??
Click to expand...
Click to collapse
If you can get into Download mode, then your softbricked and can reflash full firmware.. If not, Then sorry, unless you have a Jtag, there is not much you can do.
The drivers you think are installing are not the ones that you could use to do anything. I only know this because I have hardbricked a G3 before as well.
Hopefully yours is only softbricked.

Eliminater74 said:
If you can get into Download mode, then your softbricked and can reflash full firmware.. If not, Then sorry, unless you have a Jtag, there is not much you can do.
The drivers you think are installing are not the ones that you could use to do anything. I only know this because I have hardbricked a G3 before as well.
Hopefully yours is only softbricked.
Click to expand...
Click to collapse
what's a jtag and what can I do to fix my phone? I can't go into download mode, my phone won't turn on at all.

Mr_gmoney16 said:
what's a jtag and what can I do to fix my phone? I can't go into download mode, my phone won't turn on at all.
Click to expand...
Click to collapse
When plugged in and your computer recognizes it, starts installing drivers it could be drivers adb, I would think if the phone was truly off it wouldn't do anything. Could be wrong tho, do you have adb set up? What happens when you run adb devices?

Ducter said:
When plugged in and your computer recognizes it, starts installing drivers it could be drivers adb, I would think if the phone was truly off it wouldn't do anything. Could be wrong tho, do you have adb set up? What happens when you run adb devices?
Click to expand...
Click to collapse
Its not the adb drivers your thinking of, Its something else. I forgot what its called but it only comes up when you brick your LG, its something as in the area as nullUSB or something liike that.. I been though all this before. But I hope its not that.. I hope he can access his phone some how..
---------- Post added at 08:12 PM ---------- Previous post was at 08:10 PM ----------
Mr_gmoney16 said:
what's a jtag and what can I do to fix my phone? I can't go into download mode, my phone won't turn on at all.
Click to expand...
Click to collapse
Tell us what does your Device manager say when you plug in your phone to the computer? is it something NULL ?
What drivers are installing is what im asking. what are they listed as .

Eliminater74 said:
Its not the adb drivers your thinking of, Its something else. I forgot what its called but it only comes up when you brick your LG, its something as in the area as nullUSB or something liike that.. I been though all this before. But I hope its not that.. I hope he can access his phone some how..
Click to expand...
Click to collapse
So when the phone won't power on at all the computer will still detect it to install drivers? Not trying to be a smart ass, I have never bricked anything and truly just curious.

Ducter said:
So when the phone won't power on at all the computer will still detect it to install drivers? Not trying to be a smart ass, I have never bricked anything and truly just curious.
Click to expand...
Click to collapse
Its not really drivers for the phone.. anytime you plug anything into a USB slot something shows up.. doesnt mean its what you want.. I had something NULL show up when I bricked mine. I by mistake formated EAF partitioned and messed up to the point of NOTHING........... I got my money back and bought another someplace else

Mr_gmoney16 said:
I bricked my T Mobile G3 D851 by flashing Dark Knight 5.0 rom that was in this thread. I didn't think much of it because normally roms are in the right places in xda, I understand its my fault and there is no one to blame but myself. I just need some help restoring it. It does not turn on at all. I plugged it into the computer however, it showed some life. My computer was installing the drivers automatically but it fails. So there has to be a way to fix this right??
Click to expand...
Click to collapse
don't waste your time trying to get it fix.i did the same thing and i never found a way to fix it.i bought the phone second hand so no t-mobile warranty then my only solution was calling lg and since the phone has a one year warranty with lg it do not matter if you have a receipt or not. i send it to lg with label and ra# they provided.took 2 weeks but lg fix my lg g3 for free. try that.for what i found out is the only solution at the moment for hardbrick.

If it doesn't turn on, I suggest you either use your warranty for LG Repair Service ( like I did) or get a new replacement from LG or T-Mobile. There is no way to fix this problem atm and if your computer recognize the device, its going to be called QHSUSB_DLOAD. It took me a week to figure out that I had to send it to LG. Remember guys, this is hardbricked( can't turn on/ dead motherboard) so no download mode

I really don't want to send my G3 to Lg because I'm a senior in High School and I don't want to lose my pictures :/ I have an animation on popping up now but its for low battery i guess. other than that nothing is happening. I'll post a pic

Mr_gmoney16 said:
I really don't want to send my G3 to Lg because I'm a senior in High School and I don't want to lose my pictures :/ I have an animation on popping up now but its for low battery i guess. other than that nothing is happening. I'll post a pic
Click to expand...
Click to collapse
sorry to tell you this but everything on that phone is already lost.send it to lg for repair it will only take 2 weeks and you will have a working phone again.when i bricked mine i spend 2 weeks trying to fix it i even offer a bounty to anyone who can figure how to fix it and no one could finally give up and called lg.

Mr_gmoney16 said:
I really don't want to send my G3 to Lg because I'm a senior in High School and I don't want to lose my pictures :/ I have an animation on popping up now but its for low battery i guess. other than that nothing is happening. I'll post a pic
Click to expand...
Click to collapse
If you dont wanna loose your pics, that should have been backed up on external or cloud then your prob out of luck. but you can also find some phone repair place and let them hook your phone up to Jtag and reflash your phone... jtag is hard to explain, it requires soldering...... So if you dont know what it is, then dont try it your self.
PS:.. Tell us what it says in Device manger when you plug in your phone to USB.. click view and view hidden devices in device manger. take screen shot if you must.
you might just might be able to fix yor problem. if you can see the bat thing. then could just be a softbrick.. but without download mode you wont be able to fash anything.

Mr_gmoney16 said:
I bricked my T Mobile G3 D851 by flashing Dark Knight 5.0 rom that was in this thread. I didn't think much of it because normally roms are in the right places in xda, I understand its my fault and there is no one to blame but myself. I just need some help restoring it. It does not turn on at all. I plugged it into the computer however, it showed some life. My computer was installing the drivers automatically but it fails. So there has to be a way to fix this right??
Click to expand...
Click to collapse
op. check your messages. everyone else. this is the be all end all fix unless you hard bricked it. let me saave you a load of hassle. tutorial video inside the post.
http://lgg3root.com/lg-g3-root/how-to-unrootunbrick-lg-g3/

Mr_gmoney16 said:
I really don't want to send my G3 to Lg because I'm a senior in High School and I don't want to lose my pictures :/ I have an animation on popping up now but its for low battery i guess. other than that nothing is happening. I'll post a pic
Click to expand...
Click to collapse
Your pictures may still be available to you. I had to turn off auto syncing for Picasa so maybe log in from a pc and see if you got lucky.

Update 2/15
Okay so my g3 was hard bricked I sent it to factory, they replaced the internal storage and sent me back same phone (I checked IMIE) It came updated so It was patched. I downgraded it and rooted it again I put latest version on TWRP and now I'll be paying closer attention to what I flash and don't flash. Thank you guys for your support and trying to help me. I really appreciate it.

Guess who hard bricked his phone again?
So this is kinda a rant because I went where I was supposed to go this time and I read for the most part but again error in the posts and forums. I went to the reference guide and was looking for a stock version of lollipop (I didn't know it hasn't come out yet)
http://forum.xda-developers.com/tmobile-lg-g3/general/ref-t-mobile-lg-g3-links-guides-roms-t2860576
scrolled down and clicked cloudy rom http://forum.xda-developers.com/lg-g3/development/rom-cloudyg3-1-0-t2917467
it took me to another post not ment for d851 I scroll down and look at the features "Based on latest LG G3 official ROM"
okay im sold. I read the intructions and i download what i have to and do everything perfect
I flash the lolipop base band check
Start flashing cloudy, a menu pops up with different variants no d81 so i exit installation and do advanced wipe except internal and external
install another rom so everything is good in the hood, wipe cache and reboot
I check my phone and nothing. It's hard bricked. THE F***king base band bricked my phone. I have to send my phone to factory again if they do it for free, most likely not because this is my second time. then if they do, i have to pay shipping and handling, then pay someone to unlock the sim because im not on tmobile anymore I'm on cricket :/ Not everyone here is an expert on all of this, i understand its no ones fault but my own but **** when i go here i think these guys are pros and experts on mods,roms,etc. when a legitimate post is stabled and says its the guide i expect it to be right and not have to worry. I go back to cloudy rom post and i scroll down more and i see FAQ
This ROM no longer support my variant since 2.0? I'm using D850/D851/LS990/VS985, can I flash this Lollipop version?
- No, you guys cant use this Lollipop version (2.0). You must wait till LG release official ROM for your variant first to have new kernel & baseband.
- Anyway, if you wanna use my KitKat ROM, you can get it (version 1.2) here: http://forum.xda-developers.com/devd...6315#downloads
Gee thanks for that. A completely different link. why couldn't that be the first thing or something. ugh. Thank you for whoever read my whole rant. I hope someone hears me out and sparks a change.
Before anyone calls me out; I worked with
LG OG sprint LS970
OGP at&t E980
g2 sprint LS980 verizon VS980
g3 tmobile D851 verizon VS985
Verzion Samsung Galaxy S3 SCH-I535MBBVZW
T Mobile Note 4 SM-N910TZKETMB
All of them Fully Root,TWRP,4.4 or 5.0 Roms. To show I'm not 100% newbie and I make mistakes.

Mr_gmoney16 said:
So this is kinda a rant because I went where I was supposed to go this time and I read for the most part but again error in the posts and forums. I went to the reference guide and was looking for a stock version of lollipop (I didn't know it hasn't come out yet)
http://forum.xda-developers.com/tmobile-lg-g3/general/ref-t-mobile-lg-g3-links-guides-roms-t2860576
scrolled down and clicked cloudy rom http://forum.xda-developers.com/lg-g3/development/rom-cloudyg3-1-0-t2917467
it took me to another post not ment for d851 I scroll down and look at the features "Based on latest LG G3 official ROM"
okay im sold. I read the intructions and i download what i have to and do everything perfect
I flash the lolipop base band check
Start flashing cloudy, a menu pops up with different variants no d81 so i exit installation and do advanced wipe except internal and external
install another rom so everything is good in the hood, wipe cache and reboot
I check my phone and nothing. It's hard bricked. THE F***king base band bricked my phone. I have to send my phone to factory again if they do it for free, most likely not because this is my second time. then if they do, i have to pay shipping and handling, then pay someone to unlock the sim because im not on tmobile anymore I'm on cricket :/ Not everyone here is an expert on all of this, i understand its no ones fault but my own but **** when i go here i think these guys are pros and experts on mods,roms,etc. when a legitimate post is stabled and says its the guide i expect it to be right and not have to worry. I go back to cloudy rom post and i scroll down more and i see FAQ
This ROM no longer support my variant since 2.0? I'm using D850/D851/LS990/VS985, can I flash this Lollipop version?
- No, you guys cant use this Lollipop version (2.0). You must wait till LG release official ROM for your variant first to have new kernel & baseband.
- Anyway, if you wanna use my KitKat ROM, you can get it (version 1.2) here: http://forum.xda-developers.com/devd...6315#downloads
Gee thanks for that. A completely different link. why couldn't that be the first thing or something. ugh. Thank you for whoever read my whole rant. I hope someone hears me out and sparks a change.
Before anyone calls me out; I worked with
LG OG sprint LS970
OGP at&t E980
g2 sprint LS980 verizon VS980
g3 tmobile D851 verizon VS985
Verzion Samsung Galaxy S3 SCH-I535MBBVZW
T Mobile Note 4 SM-N910TZKETMB
All of them Fully Root,TWRP,4.4 or 5.0 Roms. To show I'm not 100% newbie and I make mistakes.
Click to expand...
Click to collapse
I guess you paid the price for rushing thru the process. Sometimes we get caught up in the moment. Its been clear for days, weeks and months that stock LP for TMO G3 has not been released and much development is hinging on that release. I myself have been rooting phones/tablets for years and been fortunate not to make mistakes (or catch myself in time before doing so) and never even had a soft brick experience to date. I hope you got it sorted out

She died my lg d851 Fulmics 6. 1
Even BoardDiag does not help. The smartphone is not that does not respond. Permanent error when passing check ap / check emms 'no response from the device. Check pmic first and it still boot problem, replace ap' I do not know what to do.
Can someone help me?
No recavery. No download mode. Only black screen
The smartphone does not respond to button presses
The Device Manager is displayed as LGE AndroidNet Serial Port

Sadig86 said:
She died my lg d851 Fulmics 6. 1
Even BoardDiag does not help. The smartphone is not that does not respond. Permanent error when passing check ap / check emms 'no response from the device. Check pmic first and it still boot problem, replace ap' I do not know what to do.
View attachment 3855072
Can someone help me?
No recavery. No download mode. Only black screen
The smartphone does not respond to button presses
The Device Manager is displayed as LGE AndroidNet Serial Port
Click to expand...
Click to collapse
http://forum.xda-developers.com/tmobile-lg-g3/help/lg-g3-d851-unbrick-qualcomm-9008-t3430221

Omar-Avelar said:
http://forum.xda-developers.com/tmobile-lg-g3/help/lg-g3-d851-unbrick-qualcomm-9008-t3430221
Click to expand...
Click to collapse
Thanks, but I've found myself .