I accidentally bricked my Samsung Galaxy S3 with a bad software. Now, It won't turn on at all. I tried this so far by pressing volume + home+ power with no luck. Whatever that I do, I cannot get it to go into download mode. This is what I did that bricked my phone. I really feel so dumb for not seeing the "for windows os!" Any help will be greatly appreciated. Thanks in advanced.
Section 1: (For Windows OS)How to Odin stock pre rooted 4.1.1 JellyBean/Unlock bootloader/Flash a Custom recovery
Step 2: Power device off, hold the volume down/home/power keys until you see a yellow triangle, then press the volume up key to access "odin or download mode".
Step 3: Open odin and connect the oem usb cable to pc & device. There should be a "comport number" in upper left hand corner of odin indicating communication between the device & pc.
Step 4: Click on the PDA function of odin. Select the stock rom you downloaded in step 1, then select start. This operation should take less than 8 minutes before odin will say pass/reset and should reboot. If not manually reboot...
Step 5: Open up the SuperUser application from your app drawer and make sure its up to date!
Step 6: Download the EZ-Unlock app to your device from HERE.(Only use version 1.1 or 1.2 for now as the latest versions have issues!)
Step 7: Open the app and select unlock! Now your unlocked...yup its that easy!
Step 8: Download the EZ-recovery app to your device from HERE.
Step 9: Open app, select CWM recovery, tap the pulldown menu, choose CWM 6.0.1, select flash, then reboot recovery.
Step 10: Congrats you are now rooted, unlocked, and have a custom recovery installed!! If you want to flash a custom rom proceed to section 3 or 4.
It wasn't bad software, just the wrong software. Looking at those directions that is the root and recovery method for a Verizon GS3. Try to get it into download mode again (vol -, home, pwr) and see if you can flash the stock odin files.
KillaHurtz said:
It wasn't bad software, just the wrong software. Looking at those directions that is the root and recovery method for a Verizon GS3. Try to get it into download mode again (vol -, home, pwr) and see if you can flash the stock odin files.
Click to expand...
Click to collapse
Thank you, but that didn't do it cause it's fully bricked. I had to jtag it in order to bring it back to life!
Related
Hi, Just like the title says, I have the 10.5 tab, I'm currently on the us ota for 5.0.2 rooted. I was wondering what the best and safest way to downgrade was? I'm having alot of problems with 5.0.2. I mean it runs smoothly and everything it's just alot of the games i play that worked great on kitkat no longer work on lollipop they just crash when i try to open them. Also there is no wanam xposed for 5.0.2 yet which is also a bummer. any advice or a steering in the right direction would be greatly appreciated as I don't want to try to do it without knowing what im getting into and make my nice little tablet a brick. thanks for your help.
Just flash the stock Kitkat 4.4.2 firmware
Sent from my SM-T805 using XDA Free mobile app
Don't fret. I am a total noob too. I got the following information from a different site, Unfortunately I cannot post the link as a noob. Once I have enough post count, I will add the link to the source (fairness to the author of the source).
How to flash Samsung Stock Rom using Odin
Home > Tutorials > Last update on February 1st, 2015
These are the instructions to flash Samsung Stock ROM (original firmware) using Odin on Windows Computer.
Requirements: Your Samsung device should have at-least 30-40 percent of phone batter to perform the flashing process.
Flash Samsung Stock Rom using Odin
Step 1: Download and install Samsung USB Driver on your computer. In case you have already installed the Samsung USB Driver on your computer then Skip this step.
Step 2: Download (Stock ROM compatible with your device) and extract it on your computer. After extracting you will be able to see these kind of files:
T800XXU1ANJ6_T800XAC1ANI1_HOME.tar.md5
Step 3: Now, Enable USB Debugging on your Samsung Galaxy Device. To enable USB Debugging: Open Settings > Developers Option > USB Debugging > Tick to enable.
(Developers Option is hidden for Android 4.2.2 or above, to show the developer option Go to Settings > About Phone > Built Number (Tap on it for 5-8 times).
Step 4: Power Off your Samsung Device.
Step 5: Now, you have to boot into Download mode. To boot into Download Mode: Press and Hold Volume Down Key, Home Key and Power Key. When phone vibrates Leave the Power Key but Keep holding the Volume Down Key and Home key. You will boot into the Download Mode.
Step 6: In the Download mode you will be able to see a Warning Yellow Triangle Sign. In this situation you have to press the Volume up key to continue.
Step 7: Download and extract Odin on your computer. Use Odin 1.85 (Successful in downgrading to KitKat from Lollipop)
Step 8: Now, Open Odin3 and connect your phone to the computer.
Step 9: Once you have connected the phone to the computer, Odin will automatically recognize the device and show “Added” message at the lower-left panel.
Step 10: Once your device is detected by Odin, click on the “PDA” (or AP) button and select the tar.md5 file that you have extracted in Step #2.
Step 11: Now, click on the “Start” button in Odin to begin the Flashing process.
Step 12: Once you see, the Green Pass Message then remove the USB cable from the device (during this process, your device will restart automatically).
Step 13: Your Samsung Device will now stuck at boot (boot loop). Now, You have to boot into Stock Recovery Mode, To Enable Stock Recovery mode: Press and Hold Volume UP key, Home Key, Power Key. When phone vibrates Leave the Power Key but Keep holding the Volume UP Key and Home key. You will boot into the Recovery Mode.
Step 14: In Recovery Mode, Wipe Data/factory reset.
Step 15: Once Cache Data is cleared, Select Restart Phone Now from the recovery menu.
Step 16: Now, your Samsung Device will restart without any issue with the Stock Rom you have flashed.
I ran into problems flashing the ROM twice and I went into a complete panic (could be Odin 3.10, or corrupted ROM). My region is XAC. Initially I tried XAR, and failed miserably. Eventually I downloaded the XAC ROM from a different source (SamMobile), also using Odin 1.85 instead of 3.10. Everything went smoothly (with the above stated boot loop). Should you get a Fail message in Odin, use the instructions from droidviews (do a web search on droidviews and "firmware-upgrade-encountered-an-issue-solution". Again, I will post the link once my post count is slightly higher.)
Step 3 is not required at all. Odin 3.10 should work fine.
As for factory reset, that shouldn't be required, that should be a last resort. Just wipe cache partition. I would simply install twrp for this.
It should then boot.
Greetings everyone
I'm new to samsung. I had a moto g. And there the drill was. Unlocking the boot loader, flashing custom recovery and then installing a rom. But browsing the threads here i am confused. Where should I start. I have a note 2 GT7100 (India) no carrier. With 4.4.2 installed. I wantbto install a 5.x.x custom rom. Please help. I beg
First root your phone with kingo android root then install odin on your pc and install samsung drivers if you need .
Then boot your phone in download mode. Do it by pressing simultaneously ‘volume down’ + ‘home’ + ‘power’ buttons. Release the buttons when you’re asked to press Volume Up, click it and enter download mode.
Go to ODIN folder on your PC and run the ODIN .exe file.
Now you can connect your smartphone to your PC. ODIN will say "ADDED". If ODIN doesn’t display the "added" text, then you will have to re-install the USB drivers for your smartphone.
Go to ODIN program window and click on ‘PDA’.And select the recovery you have downloaded.( https://dl.twrp.me/t03g/twrp-2.8.6.0-t03gub.img.tar.html (for 3g version) https://dl.twrp.me/t0lte/twrp-2.8.6.0-t0ltecan.img.tar.html for 4g version)).After you have installed your recovery go to your preffered rom thread and look for the steps you must to do in order to install the rom.For android l you need to reformat your partiotion(there are useful steps in cyanogenmodx thread)
Please quick answer !!!
http://forum.xda-developers.com/galaxy-note-10-2014/general/root-root-stock-kernel-t3240218
And could someone explain to me step by step how to upload the root and recovery ? Because I too unknown to android .
kacper12897 said:
And could someone explain to me step by step how to upload the root and recovery ? Because I too unknown to android .
Click to expand...
Click to collapse
You can find how to root here. FULL CREDITS GO TO Zionator as he wrote up the instructions.
Easy Guide to Root :
1. Go to Rooting Guide - http://forum.xda-developers.com/gala...6#post63637426
Download only the P605 modded boot IMG and then come back here. Move the tar to tablet. "In my opinion that guide is very confusing" This is much more simple...
2. Go to TWRP (download version 2.8.7.0) - https://dl.twrp.me/lt03wifiue/
Download the img.tar This file you keep on pc to flash via Odin.
3. Go to SuperSU v2.52 Beta - https://download.chainfire.eu/743/Su...erSU-v2.52.zip
Download the zip. Move the zip to tablet.
4. Reboot the tablet into download mode and open Odin on the PC then connect the tablet to PC. In Odin click AP tab and locate the TWRP and uncheck Auto-Reboot then hit start. When done hold the power button + vol up button "the vol button furthest from power button" + home button til you see red writing on top right hand corner. This can take a while so don't panic just wait.
5. When finished booting into TWRP pull Spen and click Install then find modded boot img "remember to switch between IMG & ZIP mode in the lower left hand corner" Now flash the boot img. Do not reboot just go back and switch back to ZIP mode and flash SuperSU when done reboot.
6. Wait for the boot to finish. You are now rooted.
I hope this makes it easy for you!!!
thank you for the guide buhohitr.
worked perfectly for me
buhohitr said:
You can find how to root here. FULL CREDITS GO TO Zionator as he wrote up the instructions.
Easy Guide to Root :
1. Go to Rooting Guide - http://forum.xda-developers.com/gala...6#post63637426
Download only the P605 modded boot IMG and then come back here. Move the tar to tablet. "In my opinion that guide is very confusing" This is much more simple...
2. Go to TWRP (download version 2.8.7.0) - https://dl.twrp.me/lt03wifiue/
Download the img.tar This file you keep on pc to flash via Odin.
3. Go to SuperSU v2.52 Beta - https://download.chainfire.eu/743/Su...erSU-v2.52.zip
Download the zip. Move the zip to tablet.
4. Reboot the tablet into download mode and open Odin on the PC then connect the tablet to PC. In Odin click AP tab and locate the TWRP and uncheck Auto-Reboot then hit start. When done hold the power button + vol up button "the vol button furthest from power button" + home button til you see red writing on top right hand corner. This can take a while so don't panic just wait.
5. When finished booting into TWRP pull Spen and click Install then find modded boot img "remember to switch between IMG & ZIP mode in the lower left hand corner" Now flash the boot img. Do not reboot just go back and switch back to ZIP mode and flash SuperSU when done reboot.
6. Wait for the boot to finish. You are now rooted.
I hope this makes it easy for you!!!
Click to expand...
Click to collapse
404 Page Not Found
Oh snap! Something broke! A genius monkey has been alerted.
Until he fixes it, use our glorious search tool to find ROMs, apps, tools, and other sweet mods for your phone.
haha.... http://forum.xda-developers.com/gala...ernel-t3240218
Hi friends today I am going to tell you how to root note3neo lollipop stock rom. Plz follow all steps. I have successfully rooted without any problem but I have heard that some are loosing their imei. So make a backup as soon as you are in twrp. Now the process as follows.
Do it at your own risk.
First Download the below file. It contains all the files including the USB drivers.
Link -: https://mega.nz/#!C99gxYDR!wkIse-u4wfCKIn-p3iH-6QSjtZ74p8Zom82-uRjqdcY
Now follow the steps below.
Installation
1.)Turn on usb debugging in developer option.
Tap the Settings option.
Tap the About Phone option.
Keep tapping the Build Number option (seven times) until it says you are a developer.
Tap the new Developer Options menu that appears.
Make sure that the USB Debugging option is checked.
2.)Power off your device, press and hold Volume Down + Home + Power buttons at the same time until you see a Warning with a Yellow Triangle.
3.)Now press Volume Up button. Your phone now is in ODIN MODE (Download Mode).
4.)Open Odin on PC. ( Odin is available in the link zip file )
5.)UNTICK everything
6.)Connect Phone to PC using USB Cable.(You will see added message on Odin)
7.)On Odin click on PDA(till version 3.07) OR click on AP(after version 3.09)
8.)Select the twrp.tar.md5
9.)Press on start.
10.)Remove battery quickly after Odin says pass before it boots up.
11.)Insert battery again. Press Power + Volume Up + Home button, and hold till you see the Samsung logo.
12. Next it will boot into twrp. Now first I suggest you to make a backup.
13. Now flash the SuperSU.zip file which I have provided in the zip.
Done. Your mobile is now rooted.
. Please Thank me If Helped
Now this is for the people who want xposed.
Download the file below and extract it.
https://mega.nz/#!uw8hRJQL!lnFobDr36EzNZhH15ibnIejnn9TsIIkYGDMPCOilfnA
You will find 2 file. One of apk and other is of zip.
Install the apk file. Next reboot to recovery and flash the 2nd file which is of zip.
Reboot will take some time.
Done
thanx bro
I purchased a used Samsung Galaxy Tab S 10.5 on ebay. Originally it had Android 4.4.2
When I turned it on the device is in retail demo mode.
I have tried the following
1) passwords found on this forum such as (5444, M729Q16K8546, blue, unlimited, easy, galaxy)
2) none of these worked
3) Can not deselect "samsung retail mode" in settings/security/administrators
I tried updating to android 6.0.1 by doing the following but the retail mode is still there
It will not enter into download mode so I did the following
1) Enabled developer options on tablet
2) Used command "adb reboot download"
3) Installed Android 6.0.1 stock rom (T800XXU1CPH7_T800XAR1CPH4_XAR.zip) from sammobile.com
4) Tablet installed and updated Android
5) Retail mode is still there and I still can not get rid of it
Any suggestions are greatly appreciated
Thanks
Never had a retail demo device so my answer may be limited.
Did you tried/are able to install TWRP ?
If you can get TWRP you can try to make a complete factory wipe (Advanced Wipe > check all the boxes > wipe)
Then reboot to download mode (Reboot > Download)
Install the stock rom again
Here is the link: https://forum.xda-developers.com/ga...p-2-8-6-1-unofficial-sm-t800-805-807-t3074633
Flash it via odin
I have tried to do TWRP but can not get it to work. I did not use the apk I was using ODIN on my pc. I was using a TWRP file twrp_3.0.0-0_T800. Not sure if that was the issue or not.
Here are the steps I used:
1) put phone into download mode by using adb on pc (adb reboot download)
2) In ODIN
a) turn off autop reboot
b) select AP file twrp_3.0.0-0_T800
c) wait for success in ODIN
3) tablet never rebooted so I used these keys (press at same time until reboot power+vol down+vol up+home)
4) Tablet rebooted into normal running mode
If you don't enter in recovery right away you flash it the system will revert the changes back. so if the system start to boot normally you need to flash via odin again.
I recommend you to flash the version i linked, as it is more compatible with MM bootloader, also turning off auto reboot is a very important thing.
You need to press all the buttons together power+vol down+vol up+home, (press power last) . when the screen light up release the volume up button (the next to power button) and keep holding the rest.
also...
You can try one trick that i use sometimes, it will give you more time to make the key combination, connect the device to the charger and press and hold power+vol up until the screen turn off, it may show a battery icon, so you disconnect the charger and wait the icon go away. the device should be turned off now. so you basically press and hold vol down+home+power (press power last)
If you done the combination correctly and the screen became black, don't worry, it is a bug, just wait some time (1 min i think) and press home key, it should show the recovery.
It can be a pain in the a** sometimes... but trust me, it generally works.
Ok, so far so good. It took a while but I got into TWRP. But I can't seem to select the image file.
I have it on an external MicroSD in the root. File is called T800XXU1CPH7_T800XAR1CPH4_XAR.zip
I can browse files on the list on the left. But I can't seem to find the file
Did I miss a step?
Somehow after going through menus, it recognized the file
But when I tried to install it, I got these errors
Zip Signature verification failed!
Error installing zip file /sdcard/download/T800XXU1CPH7_T800ZXAR1CPH4_XAR.zip
Could not find 'META-INF/com/google/android/update-binary' in zip file
Error installing zip file /sdcard/download/T800XXU1CPH7_T800ZXAR1CPH4_XAR.zip
you got me wrong, in the TWRP what you need to do is make a complete wipe (Wipe > Advanced Wipe > check all the boxes > wipe)
then you need to enter in download mode. (Reboot > Download)
and flash the rom via odin!
extract the zip on your pc, it should be a .Tar file, select AP mode on odin, select the .tar and flash it in there.
I apologize for the confusion. Those steps worked!!
I think part of the problem is that I did not extract the firmware file. I kept trying to flash the TAR file.
I did a wipe in TWRP
Then rebooted into download mode
Flashed extracted firmware file in ODIN in AP Box
Then the tablet rebooted and was in setup mode like a brand new tablet!! Who hoo.
Works great
Thanks for all the help