CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
REQUIREMENTS
Click to expand...
Click to collapse
- TF300T (it can be installed on TF300TG but no 3G support!)
- Unlocked bootloader
- Your bootloader must be at least on Jelly Bean version (10.4 and above). - We recommend that you run the 4.2 Bootloader.
DOWNLOADS
Click to expand...
Click to collapse
Google Apps:
http://goo.im/gapps
Nightlies:
http://get.cm/?device=tf300t
HOW TO INSTALL
Click to expand...
Click to collapse
First installation :
1) Unlock your device, and install CWM recovery : http://forum.xda-developers.com/showthread.php?t=1668173
2) Push the update zip to your internal memory
3) Reboot in recovery (Shutdown tablet, press Vol Down + Power, then press Vol Up when prompted)
4) Make a backup
5) Navigate to "Install zip from sdcard", "Choose zip from sdcard", and choose the update zip you previously pushed to your tablet
5a) If you want Play Store, flash gapps now too (link above)
6) Go back and Wipe data/cache
7) Reboot
Updating from previous build:
1) Push update zip to /sdcard/
2) Reboot in recovery
3) Flash as above
4) Reboot
If any issue after updating, wipe data.
CHANGELOG
Click to expand...
Click to collapse
http://changelog.bbqdroid.org/#tf300t/cm10.1/next
SOURCES
Click to expand...
Click to collapse
http://github.com/cyanogenmod
http://github.com/cyanogenmod/android_kernel_asus_tf300t
http://github.com/cyanogenmod/android_device_asus_tf300t
DEVELOPERS
Click to expand...
Click to collapse
xplodwild, bumble-bee (for tf201 device tree from which this tree is inspired), loganmc10, dasunsrule32 for some help, cyanogenmod
SUPPORT US
Click to expand...
Click to collapse
You can either help us by giving FULL bug reports WITH LOGS, WITH REPRO CASE, ETC, or by submitting patches.
If you're not a developer, but still want to support you can hit the "Donate to me" button up ahead. Remember this is something I'm doing in my free time, so a small gift is always appreciated and motivates me to keep on updating the port Thanks to all donators!
First one FTW! :laugh:
Nice work, much broken?
Sent from my ASUS Transformer Pad TF300T
No, actually its running very nice.
Rotation is not working, SU bug nothing to be afraid of
mikaole said:
No, actually its running very nice.
Rotation is not working, SU bug nothing to be afraid of
Click to expand...
Click to collapse
Easily fixed by downloading SuperSU, and disabling Superuser (app) within the Apps section of Settings.
Yeah, finally! Thanks for this build, but I have one problem that wasn't mentioned before: My music is in the now playing section just showing kind of nothing (see in the Attachments) - I runned supercharger for a bit increasements in reaction time, maybe this is the issue if no other ppl are reporting this (or it's just the apk I dloaded from Google Play )
btw any chance to see a kernel with increased I/O to the official version from unter's source maybe? (yeah, they aren't up to date for 4.2, but Asus I/O is not really godlike lol )
Testing now things like surfing etc. - if there are more issues I'll report :good:
Just installed Play Music from Play Store, and the app seems to work fine. Let it some time to sync maybe?
As for I/O patches, some are already in sources, and I can't find any relevant commit at untermensch's github besides CPU/GPU clock changes.
Ok, I think I noticed differences without OC, but maybe it was GPU OC
btw Trebuchet is force closing for me when hiding the search bar, is this only my fault?
btw btw: google play music (and other laagish screens) "fixed" by letting the ROM be the ROM and set I/O to deadline...
Time to do some installing!
Is GPS still ****ed?
I installed this ROM just to check it out, but now I want to restore my previous backup. I went to TWRP but it says I don't have any! I checked my /data partition, and it's completely different, and a lot of stuff is missing.
Any help?
I'm not sure but some I/O patches are in ramdisk - means untermensch kernel have other ext4 mount options. And about the GPU and CPU OC, as I know this comes from that untermensch kernel emulates the TF700T hardware.
Northern-Loop said:
Time to do some installing!
Is GPS still ****ed?
Click to expand...
Click to collapse
Everyone reported it's fine.
atiatinini said:
I installed this ROM just to check it out, but now I want to restore my previous backup. I went to TWRP but it says I don't have any! I checked my /data partition, and it's completely different, and a lot of stuff is missing.
Any help?
Click to expand...
Click to collapse
Blame TWRP, they're not 4.2-compliant yet. Since multi-user arrived, all data is organised in subfolders inside /sdcard with IDs for every user (main user = 0), so you have something like /sdcard/0/actualdata
Where has USB debugging option moved to? Cant seem to find it.
Thanks
Nekromantik said:
Where has USB debugging option moved to? Cant seem to find it.
Thanks
Click to expand...
Click to collapse
Same here. No developer options and using "secure settings" from the play store is no help.
adb toggle from play store works!
tobdaryl said:
Same here. No developer options and using "secure settings" from the play store is no help.
Click to expand...
Click to collapse
Click several time on number build in settings - info phone
On Android 4.2 you have to to settings - about tablet and tap 7 times build number for developer options to appear
thanks
anyone got flash player installed on this?
XpLoDWilD said:
Everyone reported it's fine.
Blame TWRP, they're not 4.2-compliant yet. Since multi-user arrived, all data is organised in subfolders inside /sdcard with IDs for every user (main user = 0), so you have something like /sdcard/0/actualdata
Click to expand...
Click to collapse
So it better to use CWM instead?
If you use CWM you can restore backups, seems like it's not possible (yet) on TWRP... So if you want to be on the safe side with backups, use CWM :good:
Maybe read this twrp link.http://teamw.in/androidmultiuser
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is a preview build of CyanogenMod 10.2
Sauce: https://github.com/CyanogenMod
Downloads
Firmware: http://get.cm/?device=p1 (Grab the builds that start with "cm-10.2-")
Google Apps: 1 (Make sure you grab the correct version, for CyanogenMod 10.2 / Android 4.3.0)
Installation
Note: this firmware uses the same partition layout as CyanogenMod 10.1 nightly builds.
Do a Nandroid Backup!
Install the firmware using ClockworkMod Recovery
Optionally install the Google Addon
Known Issues
Bootanimation looks weird for the first few seconds.
Still image capture from the front camera doesn't work.
Change Log
20130814
Initial release
Reporting Bugs
You are allowed to report bugs only in this thread. Note that this is a preview release and non-device specific bugs will not be accepted. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved.
Use these commands to get a logcat and dmesg
Code:
adb root
adb logcat > logcat.txt (wait for a few seconds then press Ctrl + C)
adb shell dmesg > dmesg.txt
Credits
humberos, sbradymobile, jt1134, pawitp and everyone else involved in coding and debugging.
Works perfectly so far. Everything works. Battery backup is good too. The option to disable hardware keys is missing I guess but that's alright. Thanks for your hard work.
Sent from my GT-P1000 using Tapatalk 4
Any chance we get some p1c love
Sent from my SCH-I800 using xda premium
Nicklag said:
Any chance we get some p1c love
Sent from my SCH-I800 using xda premium
Click to expand...
Click to collapse
I don't remember where, but at some point it was advised that CM10.0 and subsequent ROMS are the same for P1000, P1000L and P1000C.
@cdesai, can you please correct me if wrong?
Thank you, Desai!!! It looks decent! You are the great coder.
When push the power button, the screen always switches to landscape from portrait (or
vice versa) before it goes off. And lockscreen is always portrait.
Yue_Iohikzu said:
I don't remember where, but at some point it was advised that CM10.0 and subsequent ROMS are the same for P1000, P1000L and P1000C.
@cdesai, can you please correct me if wrong?
Click to expand...
Click to collapse
P1000, P1000L and P1000N - the C version is a different beast.
Mjoelnir77 said:
P1000, P1000L and P1000N - the C version is a different beast.
Click to expand...
Click to collapse
I just verified, indeed it is a device for a different region.
Thank for the heads up.
Most likely the only requirements are the drivers for the region specific hardware, besides that it should be the same.
Hi!
First of all, thanks for this great new rom. Its feel like faster than 10.1 (maybe because of the factory reset)
My only problem i cant take PicSphere photos with Focal. The logcat is attached.
Thanks again!
As far as I know Focal is still in a very early stage. It has bugs on every 10.2 rom.
Sent from my GT-P1000 using xda app-developers app
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
bravokylee said:
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
Click to expand...
Click to collapse
Go to Setting -> About tablet -> Click 7 times on Build Number to enable developer options, then set Root access there...
bravokylee said:
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
Click to expand...
Click to collapse
Try to flash superSU 1.5.1
send from my Nexus
Installed this in my P1000. Working fine. Flashed this over 4.2.2 by alroger's and then flashed gapps for 4.3. Awesome. Thanks for the developer.
Sent from my GT-P1000 using xda premium
I can't connect to home WiFi network, even after several attempts it still reports only:
The problem with the verification
Thanks in advance for any help
Wiped Dalvik and formatted cache and system and then installed that directly over the Alroger from 10th of August with the march gapps (there are newer ones - loading them now). Everything works and no bugs so far (only missing the tweaks from the alroger rom).
You only get root after becoming a delevoper like described above. But it works then without any third party stuff or any problems.
Wow! Just installed this to test for the weekend, but I don't think I have to go back I also flashed over alrogers last build (full wipe), and it's working very stable ever since. What is experimental about it?
Just one question, what governor and scheduler do you prefer cdesai (or others)? Is the standard on demand and row advisable, because it's pre-configured like that, or is that a misunderstanding?
TRIM Support?
Hi, Thanks for this. Does anyone know if TRIM Support is enabled in this version? Does it help out?
Thanks.
why not p1c?looking forward.....
polycentric said:
why not p1c?looking forward.....
Click to expand...
Click to collapse
+1 , If I'm not interested in connecting it to the Sprint CDMA network and only use it as a WiFi tablet is it OK to use the GSM ROM anyway if i only use the wifi? I always wondered that.
If by "bootup screen looks weird for a few seconds" you mean that the Cyanogenmod logo is stretched horizontally and you can only see the word "Cyanogen", I've been having that since I first flashed CM10, even the stable builds.
As for the ROM itself, it's nice and fast, but battery life is a *****. I know it'll get better, of course, so I'll just stick with this.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
These are CyanogenMod 11 - Android 4.4 (4.4.2 as of 12/12/2013) Kitkat builds
Sauce: https://github.com/CyanogenMod
Downloads
ROM: http://download.cyanogenmod.org/?device=p1/URL]
Installation
Note: this ROM uses the same partition layout as previous CyanogenMod builds.
Do a Nandroid Backup!
Install the ROM using ClockworkMod Recovery
Optionally install the Google Addon
Reporting Bugs
You are allowed to report bugs only in this thread. Note that this is a preview release and non-device specific bugs will not be accepted. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the build again to get rid of the modifications before reporting.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved.
Use these commands to get a logcat and dmesg
Code:
adb root
adb logcat > logcat.txt (wait for a few seconds then press Ctrl + C)
adb shell dmesg > dmesg.txt
Credits
humberos, sbradymobile, jt1134, pawitp and everyone else involved in coding and debugging.
PSA: No need to repartition to use art
All you need to do is set a property (dalvik.vm.dexopt-data-only) to 1
You can add the below line to /data/local.prop, that will keep the property set.
Code:
dalvik.vm.dexopt-data-only=1
cdesai said:
PSA: No need to repartition to use art
All you need to do is set a property (dalvik.vm.dexopt-data-only) to 1
You can add the below line to /data/local.prop, that will keep the property set.
Code:
dalvik.vm.dexopt-data-only=1
Click to expand...
Click to collapse
I can' t find data/local.prop. i made some mistake or i have to create the file?
Sorry for dummy question...
Sent from my GT-P1000 using xda app-developers app
summerofciuccio said:
I can' t find data/local.prop. i made some mistake or i have to create the file?
Sorry for dummy question...
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Yes, you must create one in /data, give a name: local.prop, add the line, change to art, reboot.. and thank you to cdesai
storm31 said:
Yes, you must create one in /data, give a name: local.prop, add the line, change to art, reboot.. and thank you to cdesai
Click to expand...
Click to collapse
thank you very much, you, cdesai and other dev are awesome... :laugh:
the vibrator is not working, am I wrong?
Just booted to ART on cm-11-20131208-NIGHTLY-p1 + Banks Gapps. Took about 5 minutes to boot from bootscreen and 15 minutes to update the apps. So far so good, things are going smooth. Thanks for this, no need to repartition now Keep up the good work!!!
How long it takes to update to ART? I think my tab has already been about 20 min in boot animation...
Edit: it has been in boot animation over 40 min. Force rebooting...
Qqqxxxzzz said:
How long it takes to update to ART? I think my tab has already been about 20 min in boot animation...
Edit: it has been in boot animation over 40 min. Force rebooting...
Click to expand...
Click to collapse
if you dony have many apps installed before converting to ART, it should take about 10-15 mins. it goes to boot animation, and then optimizig apps screen. 40 mins is too much. perhaps you haven't added that line in post 2.
DroidTalk said:
if you dony have many apps installed before converting to ART, it should take about 10-15 mins. it goes to boot animation, and then optimizig apps screen. 40 mins is too much. perhaps you haven't added that line in post 3.
Click to expand...
Click to collapse
I think added that line, If it doesn't boot after reboot I will check that it.
Edit: not booting...
Edit: I do have /data/local.prop with dalvik.vm.dexopt-data-only=1 in it
Edit: I think I do clean reinstall and try to use ART after that.
Edit: factory reset -> reinstall rom + gapps -> turn ART on and reboot -> stuck again -> added /data/local.prop with that line -> reboot -> optimizing apps -> everything crashes -> force reboot -> optimizing again -> 1. systemui crash, 2. Themes provider crash 3. com.android.phone crash... -> force reboot -> optimizing -> same crashes... -> shutting down...
Got ART working, this time I did clean install (without gapps and with older nightly), added /data/local.prop, set ART on and rebooted.
No list of "working" and "not working" things this time?
Sent from my GT-I9505 using xda app-developers app
@cdesai do you or CyanogenMod have any plans for the p1c? ive heard that the main isue is cdma so even if it is a wifi only rom its atleast a start
also i was wondering, could someone flash a p1 rom on a p1c device that is being used only as a wifi tablet because the contract ended?
or is there something with the kernel that wouldn't let the p1c device boot using a p1 rom?
btw i just notice the thread name says " CyangenMod" and not "CyanogenMod" just a heads up :good:
bunchies said:
@cdesai do you or CyanogenMod have any plans for the p1c? ive heard that the main isue is cdma so even if it is a wifi only rom its atleast a start
also i was wondering, could someone flash a p1 rom on a p1c device that is being used only as a wifi tablet because the contract ended?
or is there something with the kernel that wouldn't let the p1c device boot using a p1 rom?
btw i just notice the thread name says " CyangenMod" and not "CyanogenMod" just a heads up :good:
Click to expand...
Click to collapse
I have a GSM device, and the CDMA device's hardware has differences from the GSM version, so no, you can't just flash a GSM build on a CDMA device, even if you're using it as a wifi-only tablet - it just won't work.
Both devices use a different kernel, and different kernel version even (GSM has moved the aries kernel - aka what Galaxy S uses, whereas CDMA still has it's own, older version)
Thanks for the great work. I have 2 questions:
1. Where can I download the Gapps for this version? I've tried several versions and in all of them I got errors regarding Google apps.
2. Is 3G (networking) fully functional?
manewinho said:
Thanks for the great work. I have 2 questions:
1. Where can I download the Gapps for this version? I've tried several versions and in all of them I got errors regarding Google apps.
2. Is 3G (networking) fully functional?
Click to expand...
Click to collapse
1. You can download BaNkS' gapps from http://forum.xda-developers.com/showthread.php?t=2012857
2. 3G is fully working
Hope this helps.
chajang said:
1. You can download BaNkS' gapps from http://forum.xda-developers.com/showthread.php?t=2012857
2. 3G is fully working
Hope this helps.
Click to expand...
Click to collapse
Gapps Core or Gapps Standard?
Launcher 3 reset sd moved apps from home page @ every restart or after every of connection with pc...
Sent from my GT-P1000 using xda app-developers app
manewinho said:
Gapps Core or Gapps Standard?
Click to expand...
Click to collapse
It's depend on you. If you want to taste the full Google Experience such as GoogleSearchHome (integrated with Google Now) you must choose GApps Standard. But GApps Core only install Google Service.
I can't understand why people wants to move to ART so fast... It's well known that most apps doesn't plays well with ART yet, so it's much better to not use ART for some time until apps adopts it massively.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
WIKI
Click to expand...
Click to collapse
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/D710_Info
INSTALLATION
Click to expand...
Click to collapse
First time installing CyanogenMod 11 to your Epic 4G Touch, or coming from another ROM:
- Copy GApps and CM 11 zip's to your internal SD Card
- Make sure you're NOT RUNNING A KERNEL WITH THE MMC-SUPERBRICK-BUG
- Make sure you're running a proper working ClockworkMod-Recovery
- Make sure you're not running a JB modem
- Boot into recovery
- DO A DATA WIPE / FACTORY RESET
- Flash CM 11 zip from internal SD Card
- Flash GApps zip from internal SD Card
- Reboot
Upgrading from earlier version of CyanogenMod 11:
- Copy CM 11 zip to your internal SD Card
- Boot into recovery
- Flash CM11 zip from internal SD Card
- Reboot
Upgrading from CyanogenMod 10.2:
- Copy 4.4.4 GApps and CM 11 zip's to your SD Card
- Boot into recovery
- Flash CM 11 zip from internal SD Card
- Flash GApps zip from internal SD Card
- Reboot
DOWNLOAD
Click to expand...
Click to collapse
CM 11 official nightly builds:
http://download.cyanogenmod.org/?device=d710
Google Apps:
https://goo.im/gapps/gapps-kk-20140105-signed.zip/
CHANGELOG
Click to expand...
Click to collapse
http://review.cyanogenmod.org/#/q/status:merged+branch:cm-11.0,n,z
http://changelog.bbqdroid.org/#/d710/next
DONATIONS
Click to expand...
Click to collapse
If you want to donate a few bucks for the work:
Thanks to all donators!
Hey! thank you for your work! I just recently got an S2, and I love cyanogenmod. However, I tried installing the 2014-08-18 nightly, and I got a status(7) Installation aborted. set_metadata_recursive failed. I used to dev back in the day as well, and I know it has something to do with updater scripts. So I just wanted to give you a heads up! Thank you for your work again!
EDIT: I just tried the liquid smooth rom, and the same thing happened, it's probably just my device, I will investigate
EDIT EDIT: Did some research got it working, again, thank you for all of your great work!
torch2424 said:
Hey! thank you for your work! I just recently got an S2, and I love cyanogenmod. However, I tried installing the 2014-08-18 nightly, and I got a status(7) Installation aborted. set_metadata_recursive failed. I used to dev back in the day as well, and I know it has something to do with updater scripts. So I just wanted to give you a heads up! Thank you for your work again!
EDIT: I just tried the liquid smooth rom, and the same thing happened, it's probably just my device, I will investigate
EDIT EDIT: Did some research got it working, again, thank you for all of your great work!
Click to expand...
Click to collapse
Which recovery were you using? What ended up being the problem?
unknownsoldierx said:
Which recovery were you using? What ended up being the problem?
Click to expand...
Click to collapse
Um I was using the Agat recovery, I followed this guys guide(After following his rooting guide) https://www.youtube.com/watch?v=9W-1FPfgclM
What ended up being the problem, is that I've never had a phone where every rom and kernel install an entirely new recovery, so I didn't understand that and messed some thing up, but I solved the problem by simply installing the blasphemy kernel, rebooting into recovery for the new recovery, and then installing this rom. Which I must say, is very sleek and smooth, much props the CM team and the dev!
dastin1015 said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/D710_Info
First time installing CyanogenMod 11 to your Epic 4G Touch, or coming from another ROM:
- Copy GApps and CM 11 zip's to your internal SD Card
- Make sure you're NOT RUNNING A KERNEL WITH THE MMC-SUPERBRICK-BUG
- Make sure you're running a proper working ClockworkMod-Recovery
- Make sure you're not running a JB modem
- Boot into recovery
- DO A DATA WIPE / FACTORY RESET
- Flash CM 11 zip from internal SD Card
- Flash GApps zip from internal SD Card
- Reboot
Upgrading from earlier version of CyanogenMod 11:
- Copy CM 11 zip to your internal SD Card
- Boot into recovery
- Flash CM11 zip from internal SD Card
- Reboot
Upgrading from CyanogenMod 10.2:
- Copy 4.4.4 GApps and CM 11 zip's to your SD Card
- Boot into recovery
- Flash CM 11 zip from internal SD Card
- Flash GApps zip from internal SD Card
- Reboot
CM 11 official nightly builds:
http://download.cyanogenmod.org/?device=d710
Google Apps:
https://goo.im/gapps/gapps-kk-20140105-signed.zip/
http://review.cyanogenmod.org/#/q/status:merged+branch:cm-11.0,n,z
http://changelog.bbqdroid.org/#/d710/next
If you want to donate a few bucks for the work:
Thanks to all donators!
Click to expand...
Click to collapse
@dastin1015 You're utterly amazing! :good::good::good::good::good:
Thanks dastin. Everybody make sure you're running the latest cwm recovery. Search first.
Yo! by the way, I don't know if it's my device or kit kat, but I've tried liquid smooth and this rom, and for some reason everything displays kinda blurry, or like low res on the screen. Is it because my dpi is too high or low? or is it a setting I gotta switch. Hopefully someone can help me out here, thanks!
P.S this is my first time with a "higher-end" phone, and I'm extremely excited to be finally be using kit kat
torch2424 said:
Yo! by the way, I don't know if it's my device or kit kat, but I've tried liquid smooth and this rom, and for some reason everything displays kinda blurry, or like low res on the screen. Is it because my dpi is too high or low? or is it a setting I gotta switch. Hopefully someone can help me out here, thanks!
P.S this is my first time with a "higher-end" phone, and I'm extremely excited to be finally be using kit kat
Click to expand...
Click to collapse
Haha 'higher end' ^ ^
What is your DPI? Should be around 220. make it lower. Peeps like 182 for this phone.
Is restoring apps + data still not recommended, like with Liquid Smooth?
unknownsoldierx said:
Is restoring apps + data still not recommended, like with Liquid Smooth?
Click to expand...
Click to collapse
You can do it if you want, but if you get issues that's a start of some of your woes
Linux guy said:
Haha 'higher end' ^ ^
What is your DPI? Should be around 220. make it lower. Peeps like 182 for this phone.
Click to expand...
Click to collapse
Well its "higher end" to me haha. All my previous phones have been single core with very little ram. So experiencing dual cores on android is mind blowing to me haha.
And does CM11 has built in DPI settings? Or should I just get closed and do it?
One last question to everybody. The battery has been acting very wonky for me. It was charging really slow, and once it was fully charged I was playing with it for about an hour, and I lost not that much percent. Then I re booted it, and I only had 5% . is this normal for kitkat? Is the ROM or my phone?
LTE is still listed as Recommended when you go to Settings > Mobile Networks > Preferred Network type
Otherwise newest nightly build is alot snappier! Keep on the good work man!
torch2424 said:
One last question to everybody. The battery has been acting very wonky for me. It was charging really slow, and once it was fully charged I was playing with it for about an hour, and I lost not that much percent. Then I re booted it, and I only had 5% . is this normal for kitkat? Is the ROM or my phone?
Click to expand...
Click to collapse
That's normal. I flashed the August 19 nightly over Villuminati and my battery dropped from 70% to 20%. Just charge it back up; the battery will stabilize in a day or two.
Ah hell yeah, CM11 going official soon after grabbing my own E4GT
Not gonna flash it though - with this 4.5' screen, I'd like to use CM11 in 320DPI glory, yet Exynos 4210 just lags under that configuration (tried in Villuminati). Sticking to CM10.2, but still huge thanks for bringing this over!
Oh, BTW, in case anyone wants to see what *my* configuration looks like, do these:
1. Change "ro.sf.lcd_density" from 240 to 320 in /system/build.prop.
2. (optional) Add a line "qemu.hw.mainkeys=0" in the same file. This gives you on-screen nav buttons. If you do this, remember to turn capacitive key backlight off in Settings-Buttons.
3. Open Terminal Emulator. Commands:
su
wm size 768x1280
reboot
DONE - E4GT is now a Nexus 4, though MUCH slower
Sent from Google Nexus 4 @ CM11
Got a weird issue. My phone was rebooting randomly, and my battery spun like a top...so I replaced it. Now with this new battery its still randomly rebooting, but not as bad. If I used my phone with that bad battery long enough, could that hurt my phone?
BBQ Log Kinda Wonky
http://changelog.bbqdroid.org/#/d710/
I like using the bbq app to follow along what is going on, it seems kind of wonky. The CM 11 nightlies are not showing up as next nightly yet. Is there something someone needs to do to "reset" the page or will it just straighten itself out as more nightlies get built?
Thanks!
fleabus
THIRSTY GNOMES said:
Got a weird issue. My phone was rebooting randomly, and my battery spun like a top...so I replaced it. Now with this new battery its still randomly rebooting, but not as bad. If I used my phone with that bad battery long enough, could that hurt my phone?
Click to expand...
Click to collapse
By chance, do you use ANKR? I bought ANKR batteries and they reboot all the time but the battery doesn't spin yet.
Double-Tap To Sleep & Go To Sleep Commands
I've been running earlier versions of this ROM since early 2014 and love it. The latest "Nightly" (08-20) seems to be working fine on my E4GT. I do have two questions, both relating to making my device work a little better in absence of a working physical "Power Button".
1. Can anyone report success or failure of utilizing the Status Bar "Double-Tap To Sleep" function? I've been trying to use it after each update of this ROM and can never seem to get it working. The Status Bar "Brightness Control" sliding gesture works fine, but not the "Double-Tap To Sleep" gesture. I was concerned that my use of Nova Launcher might be the cause, so I tested the function using both the Trebuchet and Google Now Launchers, but experienced the same problem. I'd appreciate any feedback or guidance on this issue.
2. One of the nice CM11 features is the "Go To Sleep" tile that can be found in the "Notification Drawer" Tiles, as well as being added to the Notication Screen Ribbon. What I'm looking for is the name and/or location of the file/command that initiates this "Go To Sleep" function. I'm looking for this as I'd like to assign Home Screen Shortcut and/or Nova Launcher Gesture to activate the "Go To Sleep" command, without having to pull down the Notification Screen. Nova Launcher allows you to assign "Activities" to virtually any command that can be found in your system file structure. However, I can not find the "Go To Sleep" command. If someone can point me to where that file/command is located and/or advise me of the file's name with the system, I'd really appreciate it.
As a side note... I know (and have) many apps and widgets that can switch off the display with a screen touch. However, all of them that I've tried not only turn off the screen, but also immediately lock it, as well (which I do not want to do in this case). The CM11 "Go To Sleep" command is the only one I've found that will turn of the display, but NOT lock my system.
Thanks in advance for any help and guidance you can provide!
I've noticed a couple tantalizing mentions of "soft reboot" recently, as integrated into the power reboot menu. The first link mentions the S4 specifically, but the second doesn't. It's not in our current build, so does that mean it's really only for that one family? Or maybe it just takes more time to make its way around?
http://review.cyanogenmod.org/#/c/70790
http://review.cyanogenmod.org/#/c/70811
@drk65, I could have sworn that the double-tap to sleep worked in the build a few weeks ago, but you're right that it doesn't work in the current one, so now I'm not sure if I imagined it or just forgot the trick to it.
hang after first reboot.
I wipe and install from a CWM recovery and everything is fine until I decide to reboot my device. Then I hang at Galaxy S2 screen.
My last rom was CM 10.1
Anyone have an idea what might be happening?
CyanogenMod 11 for the Samsung Galaxy Ace II x (GT-S7560M) and Galaxy Trend (GT-S7560)
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Not working:
FM Radio
Bugs:
*Camera only 3.2 megapixels (2048x1536)
*Uploading/sending videos via Instagram,Facebook and Facebook Messenger fails
Downloads:
Latest Build CM11 April 23th 2017
CHANGELOG
*Optimized dalvik
*Switched to my kernel test branch
*Miscellaneous fixes
Latest EXPERIMENTAL build: ExperimentalCM11 April 26th 2017 (by @motoralbi)
EXPERIMENTAL-CHANGELOG
*Work on bionic
*Switching to faster math functions
XposedFix
Download XposedFix.zip and flash it to get xposed working.
I have to tell you that this fix is a pretty much a big security breach,and this hack will never be incorporated in to my builds.
Flashing this fix WILL REGRESS ALL THE DALVIK CHANGES we've done so far.I do not provide support for issues regarding xposed.
Installation Instructions & Requirements:
1. Copy zip packages (ROM) to an SD Card
2. Enter recovery mode
3. Choose "install zip from sdcard"
4. Select "choose zip from sdcard" and locate the ROM zip package
5. Confirm the installation by choosing "yes"
Recoveries:
I recommend you use TWRP 3.0.2 by @kengnatural
You can also flash by codename13s TWRP 2.8.0.1
If you do not have one installed, please install one of them prior to installing the ROM!
IF YOU WANT TO USE GAPPS WITH ANY OF MY BUILD,FORMAT /SYSTEM PARTITION,FLASH ROM,BOOT IT AND THEN GO BACK TO RECOVERY AND FLASH GAPPS YOU WANT!(DONT FLASH GAPPS BEFORE FIRST BOOT!!!!)
IF YOU DONT DO THIS YOULL GET THE MESSAGE THAT SETUP WIZARD STOPPED WORKING!
THIS GOES FOR EVERYONE!
I recommend you always do a CLEAN FLASH of all my builds
Little notice:
This rom is ported version of CM11 for s7562.
I would like to say thank you to all people that are/were working on this rom:
@jonypx09
@Codename13
@m4jonez
@KlinkOnE
@kengnatural (not only for work you are doing but for mentoring me too!!)
@oF2pks (for making patches and allowing us easily to add wakelock blocker to CM11!)
guys who test my builds and report everything:
@noobcoder
@F4uzan (providing moral support)
@GreekDragon (providing moral support,thanks my giros brate)
Cyanogenmod Team
Google
Maintainers:
@pavlepiramida
@motoralbi
If you find any new bugs please report and try to make a logcat of it or at least provide a detailed explanation (what happend,what were you doing,how was the phone behaving) so I can recreate that bug myself and try to fix it!
My Github account: https://github.com/pavlepiramida
FrankenKernel repo: https://github.com/pavlepiramida/FrankenKernel
Tips for usage
For best experience I suggest you:
*set your CPU Governor to lulzactive
*set your I/O Governor to zen or CFQ
*If you dont use memory hungry apps disable KSM (it will improve your battery life just a little bit and performance)
*go to Settings/Developer options and reduce all animations to 0.5
*disable all touch sounds
*turn off Daydream in Settings/Display & lights
*turn off profiles if you do not use them
*go to Settings/Privacy and disable CyanogenMod statistics reporting
*also while you are there if you are not using Blacklist disable it
Flashable Samsung stock ICS sounds : https://www.androidfilehost.com/?fid=745425885120704205
All my builds will support @microg patch for signature spoofing
To learn more about this and why its in this rom check out his thread
[APP] microG GmsCore - lightweight free software clone of Google Play Services
"Setting up Microg" on kylessopen devices by @Zeroblood
Here you can get help for setting up Microg.
my androidfilehost folder with all build so far: https://www.androidfilehost.com/?w=files&flid=156391
Hey Pavle,
Why do you suggest turning CM stat reporting off ? I understand it's not very useful, but is there a real performance gain, or just a marginal one ?
breversa said:
Hey Pavle,
Why do you suggest turning CM stat reporting off ? I understand it's not very useful, but is there a real performance gain, or just a marginal one ?
Click to expand...
Click to collapse
For me that is always off as it is pinging their servers on every boot and sometimes causes a wakelock.
I did notice a small boost in performance but that could very well be a placebo.
Disabling does not harm you,so why not turn it off
Haha, alright, I did not know about that potential wakelock.
BTW, I'll have my friend try out one these builds tomorrow to try and make that wifi work again. I'll keep you informed !
breversa said:
Haha, alright, I did not know about that potential wakelock.
BTW, I'll have my friend try out one these builds tomorrow to try and make that wifi work again. I'll keep you informed !
Click to expand...
Click to collapse
Im sure it was just a corrupt download.
If not we'll think of something!
can i install it with cwm 5.6?
tomyjeje said:
can i install it with cwm 5.6?
Click to expand...
Click to collapse
nope
flash TWRP (as I recommended TWRP 3.0.2 by kengnatural)
Hi! A couple days ago I saw there was a link in this thread to a version of this ROM with the Omni kernel, which would fix the wifi problem in Latin American devices. Now it's gone.
What happened? Did that fix not work out? I was planning to try it this weekend...
Thanks!
mincem said:
Hi! A couple days ago I saw there was a link in this thread to a version of this ROM with the Omni kernel, which would fix the wifi problem in Latin American devices. Now it's gone.
What happened? Did that fix not work out? I was planning to try it this weekend...
Thanks!
Click to expand...
Click to collapse
I had to remove it as it was going into bootloop after flash on new build.
I have to test it a bit more.
It works for my July build but in September I changed few things that apparently dont play well with codebame13 kernel.
If I dont sort it out,Ill upload whole July rom with his kernel packed in it!
Thanks for your work. I'm looking forward to it.
By the way, in case it's relevant, a while ago I tried your "fixWifi.zip" from an old release, and it wasn't working for me. (It disabled bluetooth like you said it would, but it didn't restore wifi.) I don't know if that has anything to do with how the new release will work, but I'm telling you just in case.
mincem said:
Thanks for your work. I'm looking forward to it.
By the way, in case it's relevant, a while ago I tried your "fixWifi.zip" from an old release, and it wasn't working for me. (It disabled bluetooth like you said it would, but it didn't restore wifi.) I don't know if that has anything to do with how the new release will work, but I'm telling you just in case.
Click to expand...
Click to collapse
Hah it wasn't working for anyone,few important files were missing but I was to lazy to remove it from androidhost :/
hey pavle, did you try to fix wifi on this build or just camera?
the wifi still not work, i take a logcat but there is no error about wifi.
https://drive.google.com/open?id=0B8oAXWJSnBcvZ2xMczloT3M3cTg
do you know why?
noobcoder said:
hey pavle, did you try to fix wifi on this build or just camera?
the wifi still not work, i take a logcat but there is no error about wifi.
https://drive.google.com/open?id=0B8oAXWJSnBcvZ2xMczloT3M3cTg
do you know why?
Click to expand...
Click to collapse
Thx for Logcat,Ill see if there's something new in it!
Just a quick question,did you logcat while turning wifi on?
EDIT
Dude your logcat is an empty .txt file....
Did you remove it from Drive?
Process error, on my gt s7560.. how to fix? pls
metodding said:
Process error, on my gt s7560.. how to fix? pls
Click to expand...
Click to collapse
redownload rom
pavlepiramida said:
redownload rom
Click to expand...
Click to collapse
is not resolved
metodding said:
is not resolved
Click to expand...
Click to collapse
Strange,Im having trouble downloading it myself....
Seems that its a issue on androidfileshost side,sadly nothing I can do.
I'd suggest,if you are downloading it via phone,to try and download it via PC (Firefox,Chromium,Chrome......etc) and manually move ROM to SD Card,as sometimes theres an issue with browsers for phone.
Refresh few times download page and try again,meanwhile Ill send an email to androidfiles staff to see if they are doing anything on servers (maintenance or something else).
Thanks for report and I hope it gets sorted out soon!
pavlepiramida said:
Strange,Im having trouble downloading it myself....
Seems that its a issue on androidfileshost side,sadly nothing I can do.
I'd suggest,if you are downloading it via phone,to try and download it via PC (Firefox,Chromium,Chrome......etc) and manually move ROM to SD Card,as sometimes theres an issue with browsers for phone.
Refresh few times download page and try again,meanwhile Ill send an email to androidfiles staff to see if they are doing anything on servers (maintenance or something else).
Thanks for report and I hope it gets sorted out soon!
Click to expand...
Click to collapse
Always run the download from PC, tried several times .. the error is present equally
metodding said:
Always run the download from PC, tried several times .. the error is present equally
Click to expand...
Click to collapse
Are you using any ADBlocker on browser?(If you are disable it)
Are you using a VPN?(If you are disable it)
Have you tried other mirrors to download from?(Try other mirrors that are available,I suggest Quebec mirror )
Lineage is a free, community built, aftermarket firmware distribution of Android 7.x (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Lineage is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. Lineage does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for Lineage is available in the Lineage Github repo. And if you would like to contribute to Lineage, please visit out Gerrit Code Review.
What's Working
Boots
RIL(CALL,SMS,DATA)
CAMERA
AUDIO
WIFI
BLUETOOTH
VIDEOS
FLASH
SENSROS
GPS
What's Not Working
LED Blinking.
Off charge doesn't work don't let your battery die always put it in charging mode when your battery gets to 5%
Install instructions:
Reboot into recovery (latest TWRP recommended).
Wipe Data, System,Dalvik Cache,Cache and install.
No wipes required if you're updating from a previous version of CM 14.0 (Cache and Dalvik Cache Wipe recommended).
Flash ROM + Gapps.
Reboot.
Read post 2 before reporting bugs.
Changelog.
Download links
Rom - https://sourceforge.net/projects/android-rom-ota/files/LineageOS/Z010D/
OMS(Substratum) - https://sourceforge.net/projects/android-rom-ota/files/LineageOS-OMS/Z010D/
More Roms - https://sourceforge.net/projects/android-rom-ota/files/?source=navbar
Gapps - opengapps.org
Note - This isn't my work main developer of this project is audahadi so leave a like and support.
DONATION IS NOT NECESSARY BUT IT'LL HELP TO PAY SERVER BILLS.
Donate via PayPal - [email protected]
Credits
audahadi
luk1337
luca020400
Source
Device Tree - https://github.com/audahadi/android_device_asus_Z010D.git
Common - https://github.com/audahadi/android_device_asus_qcom_common.git
Vendor - https://github.com/audahadi/android_vendor_asus_Z010D.git
XDA:DevDB Information
LineageOS, ROM for the Asus ZenFone 2
Contributors
ShadowReaper1, audahadi, luk1337, luca020400
Source Code: https://github.com/kernel-hut/android_kernel_asus_msm8916.git
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Marshmallow Bootloader/Modem
Version Information
Status: Testing
Created 2016-12-02
Last Updated 2017-12-09
Reserved
SOME RULES
PLEASE USE GIVEN SECTIONS ABOVE TO SORT EVERYTHING YOU HAVE IN YOUR MIND FOR EXAMPLE IF YOU WANT TO REPORT A BUG USE BUG REPORT SECTION ANY BUG REPORTS GIVEN IN THE COMMENT SECTIONS WILL BE IGNORED SAME GOES FOR EVERYTHING.
First Read The OP And Use The Search Box To Find Your Issue There's A Chance That Somebody Already Might Have Faced The Same Issue Before And Fixed It.
Bug reports:
Explain how to reproduce the bug and attach logcat and dmesg (if you had a random reboot, also attach last_kmsg). If you don't know how to get those, you can use this app. Please, do not report bugs if you use any kind of mods (like xposed) or third party kernel.
Frequently Asked Questions:
Q) How can I unlock Developer options?
A) Go to Settings > About phone, and press five times on Build number.
Q) How can I enable root access?
A) Go to Settings > Developer options > Root access, and enable it for apps, adb or both.
Q) How can I set '3G only' network mode?
A) Open dialer, dial *#*#4636#*#* , open first option "Phone Information", there you can set your preferred network mode.
Q) Why there's a small delay when I wake up the phone?
A) Go to Settings > Display & lights and disable prevent accidental wake-up.
Q) Why is wifi always on in battery stats, even when it was disabled?
A) Go to Settings > Location, press on the 3 dots (top right) > scanning > disable wifi.
Q) How do I update Gapps? (Also useful if you have Gapps related problems).
A) Reboot into recovery. Wipe System, Cache and Dalvik Cache. Install ROM + Gapps. Reboot.
Reserved
Marshmallow Bootloader/Modem
If you are using stock lollipop rom then you must flash any stock marshmallow rom before upgrading to CyanogenMod else it won't boot.
When you say ASUS PixelMaster Camera is not working does it mean that the camera features of the phone will not work, even after using 3rd party app?
Thinking of updating to cyanogenmod and sorry this will be my first time in rooting / flashing to custom roms.
rmatheist said:
When you say ASUS PixelMaster Camera is not working does it mean that the camera features of the phone will not work, even after using 3rd party app?
Thinking of updating to cyanogenmod and sorry this will be my first time in rooting / flashing to custom roms.
Click to expand...
Click to collapse
Fixed in next build.. Just hold on few more
Sent from my Zenfone Max using Tapatalk
audahadi said:
Fixed in next build.. Just hold on few more
Sent from my Zenfone Max using Tapatalk
Click to expand...
Click to collapse
can't wait for the next build. thank you very much for your awesome work!
DT2W
Hi. off screen gestures are working well. though, DT2W just like in the AICP ROM is not working.
looking forward for the camera fix missed the camera 360 already
Realized now that SMS is not working for me . Can't firm conversations at all, error. How to troubleshoot?
ekeluo said:
Realized now that SMS is not working for me . Can't firm conversations at all, error. How to troubleshoot?
Click to expand...
Click to collapse
Try to use other external messaging apps and read reserved post 2.
khiya said:
looking forward for the camera fix missed the camera 360 already
Click to expand...
Click to collapse
Camera Fixed
ShadowReaper1 said:
Try to use other external messaging apps and read reserved post 2.
Click to expand...
Click to collapse
I think this is useful.
The app you linked to doesn't work, fails on start. Used Matlog instead (had to manually enable storage access from settings)
Is it just me that cannot access my sdcard using the default file explorer of cyanogenmod? I could only access my internal storage
rmatheist said:
Is it just me that cannot access my sdcard using the default file explorer of cyanogenmod? I could only access my internal storage
Click to expand...
Click to collapse
yup. Cant access mine too. I use 3rd party file manager.
ShadowReaper1 said:
Camera Fixed
Click to expand...
Click to collapse
do I need to factory data reset/ wipe system to install 14.x? I'm already in CM13
khiya said:
do I need to factory data reset/ wipe system to install 14.x? I'm already in CM13
Click to expand...
Click to collapse
you have to. Wipe dalvik cache, cache, data, system and internal (optional). Our cm14 is not an update of our cm13. Hope it helps.
Is it ok to use custom kernel with this rom??
Can I use this rom with this custom kernel?
http://forum.xda-developers.com/zenfone2/general/kernel-reaper-t3468632/page6#post69918890
Build - 20161202
d2tw not work
ekeluo said:
I think this is useful.
The app you linked to doesn't work, fails on start. Used Matlog instead (had to manually enable storage access from settings)
Click to expand...
Click to collapse
Fixed: has to delete the SMS database, which changed location in Nougat. Working now!
Hi, there's a problem. I've accidently discharged my phone, when I plug usb to charge it, it's constantly turning on, then it realises that charge is 0% and it turns off. Again and again, on-off-on-off... I think it's a kind of firmware bug. How can I fix it? I even cant access TWRP. Only fastboot mode (up+power). The firmware is great, but now I cannot use phone