Otg cable not working? - Galaxy Note GT-N7000 Accessories

Hey guys I'm running official isc non root, and I can't seem to get my mouse, keyboard, controller etc to work on my note n7000, Iv tried on a tablet and it works fine, do I need %50 + battery or something? Or do need to do something in the settings?, Iv tried us development on and off
Thanks for your help. amatris
Sent from my GT-N7000 using xda premium

Same goes to me.. Out for 10 try.. Maybe 1 time for few second.. :X
Any one have solution for this or maybe some tricks?

Check Pen drive
Hi Guys,
Did yo check if you are able to connect pen drives to you cell via OTG cable? some OTG cable can have power line also which needs to be plugged 9like in MHL cable). not sure but I guess there can be this issue.

Related

Tips and Tricks USB OTG Cable for S3 ( USB Connector )

I bought a original Samsung USB OTG Cable for my Samsung Galaxy S3 from online store ( shopsection.com ) , can anyone post tips and tricks about it.
according to my testing, Most of all USB devices can access
1- Amazing cable, it works perfect in Galaxy S II, Galaxy S III and Galaxy Note
2- Connect pendrive 2GB, 4GB, 8Gb, 16GB and access files , documents, songs, movies instant from your S3
3- Like to draw anything without C-Pen stylus? connect USB mouse and draw anything u want as like in computer mouse cursor
4- feeling touch to type on touch screen? connect USB keyboard via OTG cable and start typing SMS and Emails.
5- Does your friends running out of battery ?, connect their mobile with their usb data cable to OTG cable and get charged
6- Also if your friend give access for "Mass storage" access his files from his mobile phone
7- want to take instant printout from your S 3, connect printer USB to OTG cable and give a shot
Article from other websites about OTG cable,
- Remote Access your mobile using Data modem
- support PS3 controller
also if anyone has more tips and tricks for this OTG cable, kindly post it. so thrilled to enjoy its benefits.
I heard also Xbox 360 wired remotes work as well
I have a chinese non-oem OTG cable and works fine with pretty much every USB devide I have (usb memories, keyboard, mouse). I havent tried game remotes or a printer.
Not as amazing as the adapter Samsung will be releasing whenever they can be bothered because it will use the full 11 pins and allow MHL and other accessories simultaneously, but like always they take so long releasing accessories people just get pissed off while they waiting.
Yes Micheal 100% acceptable. only advantage for OTG cable was they launched long back after few months from Galaxy SII. But same cable we are using it for Galaxy Note and Galaxy SIII. But we are really worried for Flip Cover launch for SIII. it took nearly 2 weeks time from SIII mobile launch.
There are plenty of local manufacturers releasing case and covers and even OTG cable. only this guy has the original samsung OTG cable in India shopsection.com/item/USB_Host_OTG_Cable_for_Samsung_Galaxy_S_3 for sale with offer price.
Michael_P said:
Not as amazing as the adapter Samsung will be releasing whenever they can be bothered because it will use the full 11 pins and allow MHL and other accessories simultaneously, but like always they take so long releasing accessories people just get pissed off while they waiting.
Click to expand...
Click to collapse
Another friend from Singapore told me, OTG cable used to connect medical equipment. not sure what it is.
is it possible to connect usb device to OTG and can we use hdmi port to display mobile screen USB host to TV ??? did anyone tried this?
fbloise said:
I heard also Xbox 360 wired remotes work as well
I have a chinese non-oem OTG cable and works fine with pretty much every USB devide I have (usb memories, keyboard, mouse). I havent tried game remotes or a printer.
Click to expand...
Click to collapse
ananmetro said:
Another friend from Singapore told me, OTG cable used to connect medical equipment. not sure what it is.
is it possible to connect usb device to OTG and can we use hdmi port to display mobile screen USB host to TV ??? did anyone tried this?
Click to expand...
Click to collapse
You need MHL cable to connect HDMI to Tv and you can't connect over Mass Storage mode to Tv, Car etc because Samsung in their wisdom decided not to include it, and I know iPhone has things like blood pressure and heart rate monitors you can connect but never heard of it on Android, but it's possible to create a driver to connect pretty much anything with a USB port to Android.
Bought this otg cable for cheaper rate in local market, it worked for 2 months but i could not connect my Sony Pendrive 8GB. any application needed to upgrade on my Note to support 8gb? can your post me the link whr u purchased samsung otg cable, how long u hv been using it? is that original with warranty?
all those tips tested by you?
ananmetro said:
I bought a original Samsung USB OTG Cable for my Samsung Galaxy S3 from online store ( shopsection.com ) , can anyone post tips and tricks about it.
according to my testing, Most of all USB devices can access
1- Amazing cable, it works perfect in Galaxy S II, Galaxy S III and Galaxy Note
2- Connect pendrive 2GB, 4GB, 8Gb, 16GB and access files , documents, songs, movies instant from your S3
3- Like to draw anything without C-Pen stylus? connect USB mouse and draw anything u want as like in computer mouse cursor
4- feeling touch to type on touch screen? connect USB keyboard via OTG cable and start typing SMS and Emails.
5- Does your friends running out of battery ?, connect their mobile with their usb data cable to OTG cable and get charged
6- Also if your friend give access for "Mass storage" access his files from his mobile phone
7- want to take instant printout from your S 3, connect printer USB to OTG cable and give a shot
Article from other websites about OTG cable,
- Remote Access your mobile using Data modem
- support PS3 controller
also if anyone has more tips and tricks for this OTG cable, kindly post it. so thrilled to enjoy its benefits.
Click to expand...
Click to collapse
I myself tested most of features and its working as i said. Not sure what is problem with your flashdrive, but mine everything works. format your memory card and test it again.
bought it from https://www.shopsection.com/item/USB_Host_OTG_Cable_for_Samsung_Galaxy_S_3
Its original samsung accessories and you get 6 months warranty. so you can claim if any issues after 2 months. I believe only these guys selling Samsung S3 original products like flip cover and stylus pen in India
https://www.shopsection.com/item/Flip_Cover_for_Samsung_Galaxy_S3_i9300_(Blue)
moyud said:
Bought this otg cable for cheaper rate in local market, it worked for 2 months but i could not connect my Sony Pendrive 8GB. any application needed to upgrade on my Note to support 8gb? can your post me the link whr u purchased samsung otg cable, how long u hv been using it? is that original with warranty?
all those tips tested by you?
Click to expand...
Click to collapse
Um, how about these tips:
Super cool video JoyStick connectivity is really great....
NZtechfreak said:
Um, how about these tips:
Click to expand...
Click to collapse
Can you buy any brand USB OTG cable and they will work?
alfy! said:
Can you buy any brand USB OTG cable and they will work?
Click to expand...
Click to collapse
Wow 2nd post. Read much? :thumbdown:
fbloise said:
I heard also Xbox 360 wired remotes work as well
I have a chinese non-oem OTG cable and works fine with pretty much every USB devide I have (usb memories, keyboard, mouse). I havent tried game remotes or a printer.
Click to expand...
Click to collapse
Does anybody know if arduino is doing anything with this? It would be awesome if you could edit and upload arduino sketches using an android phone and an otg cable.
moyud said:
Bought this otg cable for cheaper rate in local market, it worked for 2 months but i could not connect my Sony Pendrive 8GB. any application needed to upgrade on my Note to support 8gb? can your post me the link whr u purchased samsung otg cable, how long u hv been using it? is that original with warranty?
all those tips tested by you?
Click to expand...
Click to collapse
The first thing that you need to check is how your thumb drive is formatted. I haven't tried a thumb drive on my SIII yet but on Atrixs I've evaluated they could only interface with FAT thumb drives. NTFS wouldn't work. You should also try a different model of thumb drive, I don't know about the power requirements but it might just be too high.
USB On The Go cable awareness not upto the level. Samsung must advertise about their accessories too as like Nokia. OTG cable is really useful to access files instant. but i wonder why its only suitable for very few models and since Galaxy Y is also has update android firmware.
anybody tried OTG cable other than S III?
Anyone know if a 32GB flash drive would work with otg cable?
Sent from my SCH-I535 using xda app-developers app
rvpals said:
Anyone know if a 32GB flash drive would work with otg cable?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yes.
Did anyone get external usb hard drive to work with otg cable on the same three. I have tried but it does not work for me, both 2.5&3.5
Sent from my SCH-I535 using xda app-developers app
rvpals said:
Did anyone get external usb hard drive to work with otg cable on the same three. I have tried but it does not work for me, both 2.5&3.5
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I think the external hard drives will only work if you use a usb port multiplier with a external power source. Dont quote me on that though!
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Miggless said:
I think the external hard drives will only work if you use a usb port multiplier with a external power source. Dont quote me on that though!
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I have actually try plugin my external hard drive with 2 headed USB cable, one connects to the USB OTG cable, one end connects to a USB port for power, and it still doesn't work.
It would be nice if it would work though.

[Q] Note II MHL > HDMI issues

Hi all.
I've searched for similar questions and can't find anything that gives me an answer... so here goes.
Model number: GT-N7100 (Samsung Galaxy Note 2)
Android version: 4.1.1
Modifications: None.
Problem:
- Connect MHL cable to phone.
- Connect power
- Connect HDMI to tv & MHL
- Phone pops up a message on screen advising that HDMI connection has been made.
- No output from phone to tv.
I tried originally with the wrong MHL cable designed for a Galaxy S2 (established this thanks to a post I found on here, thanks). Then replaced with one designed for the S3 which should (according to what i read) also work with the Note2.
Am I missing something here?
The cable used was from Amazon and is not a samsung original part. But before spending more money to get the samsung part i want to be sure i exhausted all options with the cheaper alternative.
Thanks in advance for any help anyone can give.
wisewood said:
Hi all.
I've searched for similar questions and can't find anything that gives me an answer... so here goes.
Model number: GT-N7100 (Samsung Galaxy Note 2)
Android version: 4.1.1
Modifications: None.
Problem:
- Connect MHL cable to phone.
- Connect power
- Connect HDMI to tv & MHL
- Phone pops up a message on screen advising that HDMI connection has been made.
- No output from phone to tv.
I tried originally with the wrong MHL cable designed for a Galaxy S2 (established this thanks to a post I found on here, thanks). Then replaced with one designed for the S3 which should (according to what i read) also work with the Note2.
Am I missing something here?
The cable used was from Amazon and is not a samsung original part. But before spending more money to get the samsung part i want to be sure i exhausted all options with the cheaper alternative.
Thanks in advance for any help anyone can give.
Click to expand...
Click to collapse
my theory is it has something to do with all share cast
I bought a 'generic' adapter at first, did not work. Ended up going with the Samsung adapter...worked fine...
make sure yr MHL cable/adaptor is compatible for note2/s3, they use different pins with older model
Hi all.
Thanks for the replies. [will do the whole thanks button thing in a minute].
I threw the adapter in a drawer for the weekend and pulled it back out this morning to have another crack at it.
Its the cheap n nasty adapter that is at fault. I shoved the connector into the bottom of the phone really hard this time, and instead of black, the tv screen went green. All green. A bit of jiggling later and i had phone output on the tv, but its a very sketchy connection and a slight knock loses the connection, even though the phone still thinks the cable is connected still.
Only problem then is that there is no audio coming through the tv. All phone settings suggest there should be.
So i went upstairs to try on another tv, and it works perfectly with video and audio (once the cable is rammed home good and hard).
Problem solved. For now, it will do. But I will at some point be investing in the genuine samsung part that should do the job properly. And a new TV for the living room ~ current one is old and was a budget model at the time, so you can imagine how bad it is by todays standards.
Hi, can you help to check if the camera apps work when you use mhl ?
Im using the sprint gn2 do I go with the same step when connecting mhl adapter? Before you connect to television is the phone suppose to be charging? I think I have to buy the right one .I bought mine amazon from china and still have not hooked it up to my tv yet. Can there be a problem with phone? Its new never dropped
Sent from my SPH-L900 using Tapatalk 2
i just got my samsung MHL adapter which is for the S3 but supposedly should work with note 2 also.
when i connect the hdmi cable and the power cable and then connect it to my phone i see a popup "hdmi cable cvonnected"
however,
my monitor (Dell 2408WFP) just goes into sleep mode.
i also tried another monitor.. same thing.
i'm on android revolution with perseus kernel... which is just a modded stockrom.
i have not made a samsung account so i don't have any of the samung specific apps activated... could this be the problem?
do you need to have that sharecast or whatever to be activated first in order to get the TV out functionality?
I bought Samsung MHL adapter last month for HTC One X and it works fine even without connect the phone to charging.
I just tried that to my new Note 2 and it doesn't work at all.. already try to charge the phone still not showing anything not even a notification saying my note2 connected to the hdmi...
Sent from my GT-N7100 using xda premium
Is it true with the note by sprint ...it has to be sprint o/s to work and can't have a rom on phone
Sent from my SPH-L900 using Tapatalk 2
Having the exact same issje with the original s3 adapter. It worked fine 2 days ago and then one day from another it magically stopped working on my note 2. Still works with other devices..
ok.. i decided to actually create a samsung account and installing the all-share cast app hoping this would finally make the mhl work..
but alas..
same thing..
i connect power, mhl en and hdmi cable.... set monitor to look for hdmi signal...
phone then gives me the 'hdmi adapter connected' message and then the monitor goes into energy saving mode...
i guess my adapter is faulty.... it is supposedly a genuine brand new samsung adapter but i got it from ebay hongkong or china or whatever... so... well... you know..
i think i will order the wireless all-share hub in stead...
Are you rooted? I've read that hml doesn't work if you are.
Edit: I should have read the rest of the thread. Looks like you solved the problem.
Sent from my Galaxy Note 2 using Tapatalk 2
EP2008 said:
Are you rooted? I've read that hml doesn't work if you are.
Edit: I should have read the rest of the thread. Looks like you solved the problem.
Sent from my Galaxy Note 2 using Tapatalk 2
Click to expand...
Click to collapse
well yeah... if getting a wireless allshare cast hub instead for 80 bucks is a solution.. then yes.. i guess it's solved..
by the way,
yes.. i have root.. where did you read that a rooted phone prevents the MHL adapter from properly working?
do you have a link or something?
in that case i could still try to persuade the Android Revolution HD Rom developer to look into the issue...
PainOdZ said:
Having the exact same issje with the original s3 adapter. It worked fine 2 days ago and then one day from another it magically stopped working on my note 2. Still works with other devices..
Click to expand...
Click to collapse
Same problem. Same same... Rly.
How can I fix? I've a rooted device.
psyopussy said:
ok.. i decided to actually create a samsung account and installing the all-share cast app hoping this would finally make the mhl work..
but alas..
same thing..
i connect power, mhl en and hdmi cable.... set monitor to look for hdmi signal...
phone then gives me the 'hdmi adapter connected' message and then the monitor goes into energy saving mode...
i guess my adapter is faulty.... it is supposedly a genuine brand new samsung adapter but i got it from ebay hongkong or china or whatever... so... well... you know..
i think i will order the wireless all-share hub in stead...
Click to expand...
Click to collapse
Try it using the 5V - 2A charger, i have read, somewhere i forgot, that 2A is a must for being able to use MHL.
I can't say if it is true or not, i'm atill waiting all stuff be delivered (All-share cast hub, MHL adapter, Smart Dock, etc).
Good luck
It seems like the china products r all faulty
Sent from my SPH-L900 using Tapatalk 2
pirata****zu said:
Try it using the 5V - 2A charger, i have read, somewhere i forgot, that 2A is a must for being able to use MHL.
I can't say if it is true or not, i'm atill waiting all stuff be delivered (All-share cast hub, MHL adapter, Smart Dock, etc).
Good luck
Click to expand...
Click to collapse
For me the MHL cable worked well with easy disconnections (any minimal movement). But I used it with the bloutooh mouse and so I didn't feel so much the issue.
Now the note 2 doesn't reveal the cable. I plug it in and nothing happens.
I don't remember if I changed ROM before the issue but it's sure I always had a custom ROM.
Can be a ROM problem?
I will try the MHL cable with my father's s3 and let you know if is a cable issue.
EDIT:
SORRY GUYS, IS A CAVE PROBLEM. ITS DEAD
I have rooted my device also. Come to think of it, this might just be the issue. Rooted with exynosabuse gonna try to unroot and see if it works. Still want it to work with root though because i use the sixaxis to play games..
Once u unrrot your note 2 did it work with the mhl cable
Sent from my SPH-L900 using Tapatalk 2

USB OTG Cable Doesn't Work Anymore

All the supported devices worked with my Note earlier. My USB storage, a pen drive formatted to FAT32 also mounted well. I had a good time exploring the Note as a cool mini PC connecting my keyboard and mouse until recently.
Now the OTG connector is ONLY detected with a notification saying "USB connector connected" but nothing happens after that. I am aware that power is available across the cable since my brother's Galaxy Ace starts charging and the LED symbol on my Razer mouse lights up but there is no activity on the Ace except charging and my mouse won't work.
I have tried USB Host Utilities and stickmount from d great developer but doesn't that doesn't help but increases my concern.
Has someone faced similar issues? Someone help please..
Lovin' the N7000
Does the normal data cable work when you connect to a PC ?
If not then you might need to carefully clean your data port.
Yup that works perfectly fine except for the usual Hardware ID missing error on the PC..
Lovin' the N7000
That's my cable which I bought for a dollar.
Lovin' the N7000
agvulcan said:
That's my cable which I bought for a dollar.
Lovin' the N7000
Click to expand...
Click to collapse
Call me racist but they all look alike to me!
Its probable that the cable is damaged. Just my two cents.
USB On The Go/ OTG not working, help.
I have a note n7000 on ICS 4.0 and am a first time android user, bought the phone a week back.
I tried using an 8gb flashdrive with an OTG cable. it didnt recognize the flashdrive at all, though it showed that a USB
cable has been connected.
Next i tried a 4gb flashdrive. It did recognize it but didnt show it in the "my files" list. notification says "usb storage is
empty or un-recognized format or such"
I installed the "USB host controller " app, that did'nt help. I tried to format the 4gb flashdrive in FAT32 with 1024 cluster
size and quick format mode, that didnt help either. I have attached the screenshots from the app.
i dont wish to loose warranty, and have never fiddled with drivers of android device before.
thanks a lot folks.
View attachment 1503893
Sent from my GT-N7000 using xda app-developers app
The cable is bad, I faced the same problem I asked for a replacement cable, and that worked without any problems!
tommy_vercetti said:
The cable is bad, I faced the same problem I asked for a replacement cable, and that worked without any problems!
Click to expand...
Click to collapse
I got the cable checked at the vendor. he could play a micro sd card via a card reader through the same cable and also a keyboard.
Also what does "s3c usb host driver not found" mean?
now?
A screen shot I forgot to attach last time:
Sent from my GT-N7000 using xda app-developers app
I today brought an otg cable n connected my pen drive but got no notifications. I also didn't find anything in d file manager. I formatted my pen drive in fat 32 system n again tried but no results. Is dere something i m doin wrong? D cable worked in my friends note2. Also i m on ics stunner rom with hydracore std kernel. Plz advice....thanks in advance.
Sent from my GT-N7000 using xda app-developers app
Are you on custom ROM?
Can you confirm if you are on stock ROM or custom ROM?
Quasar10 said:
Can you confirm if you are on stock ROM or custom ROM?
Click to expand...
Click to collapse
I was on stock back then..
Should Work!
I am using the N7100 and I have faced no issues yet...your cable should be fine...if in FAT32, will read automatically...if NTFS, use a program called paragon NTFS...running stock ROM and custom kernel...
otg cable works on note 2....
hello friends,,when i bought note 2 almost two months ago i used same otg cable which i was using on galaxy s2 but after updating note 2 when i attached otg cable it just shows "usb connector connected" and doest not read the flash drive,,i searched a lot on the internet for solution but didn't found anything and then flashed many different roms to check out if there is any problem with the rom,,but same result..so today i bought a new otg cable superior than first one,,so i attached it and it works prefectly,,i have tested flash drive,,keyboard mouse all works smoothly..
So at last i concluded that there is difference in otg cables may be it is in the pins structure of the adapter of the cable,,some of the cables which works on the previous galaxy devices does not works on the current galaxy devices,,so when you choose a otg cable make it confirm it is the latest build which is compatible with your device..
thanx...

[Q] Need some info on the Multi-Media dock from those who have it.

I recently bought the multi-media dock, it works fine when plugging it to my smart TV.
Sound output etc works fine via the HDMI slot.
What i can't get to work however are the usb ports. When i plug in a usb stick it won't read it even though i've converted it to Fat32 (same with hdd etc)
Also ive got a wired mouse which i wanted to try on it and it wouldn't work either.
Anybody have any info on what i have to do ?
Thanks in advanced.
Faulty dock? ... tried pen drives? ... not all hdd work. .. you may need external power source for the hard drives. ..try another wired mouse. . Tried wired keyboard?
scribbled from my note 2 (N7100)
I don't have any keyboards. I don't wanna buy one incase it won't work. .
I'll look around for another mouse though
Sent from my GT-N7100 using xda app-developers app
Connect power supply using wall charger to the dock
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2

HDMI + OTG + Charger

Hi guys, do you know any cable/adapter that has all these ports?
I'd charge my tablet while I've a pendrive inserted into it and connect all via hdmi to a monitor/tv.
Did anyone try something like this? I'd like that all ports work all together at the same time.
Samsung SM-P605 - Tapatalk
mouse100 said:
Hi guys, do you know any cable/adapter that has all these ports?
I'd charge my tablet while I've a pendrive inserted into it and connect all via hdmi to a monitor/tv.
Did anyone try something like this? I'd like that all ports work all together at the same time.
Samsung SM-P605 - Tapatalk
Click to expand...
Click to collapse
Something like this? It has USB in, although I'm not sure if that's for pass through charging or just device inputs...
jonboyuk said:
Something like this? It has USB in, although I'm not sure if that's for pass through charging or just device inputs...
Click to expand...
Click to collapse
Yes but I must be sure that all ports work together at the same time.
Samsung SM-P605 - Tapatalk
I have one of these and it works with Note 10.1 2014 - to some degree.
Basically HDMI and USB work - at the same time.
I can connect my tablet to external screen and use USB mouse, keyboard and flash drive (through USB Hub) all at the same time.
But... USB connection is kinda unstable - devices disconnect occasionally and then reconnect.
Also, charging doesn't work at all.
On my Note2 everything works OK - I guess Samsung changed something either on connector or in software in Note 10...

Categories

Resources