Hi everyone. I had a long journey trying to root my phone, I originally had ICS and tried following this tutorial: http://forum.xda-developers.com/showthread.php?t=2044645 It was able to get my phone rooted by step 7, but then I couldn't get into recovery mode, it kept giving me:
---------------
Secure booting Error!
Cause : boot certification verify
-------------------------
------------------------------
Enter the fastboot...
Enter the fastboot...
Long time no see!
-------------------------------------------------
So I thought perhaps this doesn't matter at this stage and so I continued on with the tutorial. Eventually (long story short) something happened and now I have downgraded to Android 2.3.6 but my phone is no longer rooted (I don't have 'super user' app and root checker says I'm not rooted). I tried upgrading back to at least ICS through software update but it gives me a "you are not registered" (or something like that) and won't update.
I have no idea what to do now. I honestly just want to get ICS back and give up on this whole rooting attempt. Any ideas/help appreciated.
You should have followed this guide :
http://forum.xda-developers.com/showthread.php?t=2044645
It's newer and much easier. Now for the problem at hand, run the v18f exe file from the above guide. That should fix the issue you have then be able to get to any rom from there. Make sure you follow the guide precisely.
Sent from my LG-P930 using xda app-developers app
Swetnes said:
You should have followed this guide :
http://forum.xda-developers.com/showthread.php?t=2044645
It's newer and much easier. Now for the problem at hand, run the v18f exe file from the above guide. That should fix the issue you have then be able to get to any rom from there. Make sure you follow the guide precisely.
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply. I actually was able to just use the LG update on it's own to get ICS back, though the phone isn't rooted anymore.
At some point I did try the tutorial you sent but it wouldn't let me get into recovery mode, it gave me the error I mentioned. I'm just wondering though, if I use that tutorial again, will it work with ICS and v20f? Also, by the end of it what will i get? a rooted phone with Gingerbread? (sorry if they're stupid questions, I'm still learning).
hellored said:
Thanks for the reply. I actually was able to just use the LG update on it's own to get ICS back, though the phone isn't rooted anymore.
At some point I did try the tutorial you sent but it wouldn't let me get into recovery mode, it gave me the error I mentioned. I'm just wondering though, if I use that tutorial again, will it work with ICS and v20f? Also, by the end of it what will i get? a rooted phone with Gingerbread? (sorry if they're stupid questions, I'm still learning).
Click to expand...
Click to collapse
You got that error because you tried to install CWM with the ICS boot loader still installed. The link I provided has you install v18f so it can be rooted and them use the program to keep root so you can downgrade to Gingerbread so CWM can be installed.
One more thing: if all you want is root but don't care about installing another ROM use this to root v20c and stay 100% stock other than root: http://forum.xda-developers.com/showthread.php?t=1886460
Sent from my LG-P930 using xda app-developers app
Swetnes said:
You got that error because you tried to install CWM with the ICS boot loader still installed. The link I provided has you install v18f so it can be rooted and them use the program to keep root so you can downgrade to Gingerbread so CWM can be installed.
One more thing: if all you want is root but don't care about installing another ROM use this to root v20c and stay 100% stock other than root: http://forum.xda-developers.com/showthread.php?t=1886460
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
Okay, I get it. I think I might've missed a step somewhere along the line or something. However, as you said, I really just want to root to give myself the super user ability/app since I find it helpful. I did try the link you provided before and now again but it won't work. First of all I have v20f not v20c (is that why?). Second, I choose normal mode, and then it tells me to look at my phone and click restore. My phone shows a window saying "Restore my data" and "Do not restore" but also asks for a password. Since I don't think I have a password I click on Restore my data (and leave those field blank). My phone says "Restore Starting"...then it says "Restore ended" (within a few seconds) but the Bin4ry bat file won't move on to the next step. It just stays at "Running..." Any ideas?
hellored said:
Okay, I get it. I think I might've missed a step somewhere along the line or something. However, as you said, I really just want to root to give myself the super user ability/app since I find it helpful. I did try the link you provided before and now again but it won't work. First of all I have v20f not v20c (is that why?). Second, I choose normal mode, and then it tells me to look at my phone and click restore. My phone shows a window saying "Restore my data" and "Do not restore" but also asks for a password. Since I don't think I have a password I click on Restore my data (and leave those field blank). My phone says "Restore Starting"...then it says "Restore ended" (within a few seconds) but the Bin4ry bat file won't move on to the next step. It just stays at "Running..." Any ideas?
Click to expand...
Click to collapse
Ok now we are getting somewhere. First of all v20(x) doesn't matter. If it hangs on you saying "running" just close the "command" window, and try again. The couple of times I have tried it it has always done that the first time but then worked the second or third time. It is at that point the phone is supposed to reboot. Good luck.
Sent from my LG-P930 using xda app-developers app
Swetnes said:
Ok now we are getting somewhere. First of all v20(x) doesn't matter. If it hangs on you saying "running" just close the "command" window, and try again. The couple of times I have tried it it has always done that the first time but then worked the second or third time. It is at that point the phone is supposed to reboot. Good luck.
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
First off, thanks for keeping up with me. Well, after like the fifth try, using a way of opening the bat file through cmd manually (not sure how it's any different) I actually got it to say "Successful" and it actually rebooted my device!!...However, it then said something like "Permission denied (are you root?)" or mount failed. So although the file said at the end that my root was successful, I realize it really wasn't and I even made sure; I don't have super user or anything and even root check doesn't say I'm rooted.
I tried it one more time after, but again, it wouldn't reboot. So I tried it again and this time after clicking Restore, I unplugged and plugged my USB. It did say "success" and rebooted my device, though again, the same "mount" error came up and my device isn't rooted.
Any ideas??
Two questions: first what version of windows? Second how are you launching the bat file?
Sent from my LG-P930 using xda app-developers app
I have Windows 7 64 bit and initially I just launched the bat file but double clicking it/opening it normally. However, as I mentioned, the one time it did work I opened the file using this method: youtube . com/ watch?v=7EpkrCq1gfM (all you do is launch the bat file 'manually' more or less by opening cmd prompt then directing it to the folder with the bat file, then running the bat file)
Okay I will thing you might try.... Copy the bat file along with the stuff folder to c:\. This is a wild stab in the dark but under Windows 7 the root folder has different permissions than sub folders and then just double click on the bat file from there.
If you are still having issues use this process: http://forum.xda-developers.com/showthread.php?t=2044645
Basically you get the ICS leak v18f use the tpsparky method to root then using the keep root method to keep root while you upgrade to v20f.
Sent from my LG-P930 using xda app-developers app
Tried moving it to c:\ but same error "cannot mount" or whatever.
Swetnes said:
...
Basically you get the ICS leak v18f use the tpsparky method to root then using the keep root method to keep root while you upgrade to v20f.
...
Click to expand...
Click to collapse
Does this mean you're suggesting I just do the whole guide all over again or do you mean I can just stop at some step?
hellored said:
Tried moving it to c:\ but same error "cannot mount" or whatever.
Does this mean you're suggesting I just do the whole guide all over again or do you mean I can just stop at some step?
Click to expand...
Click to collapse
You can follow the whole guide if you want to install CWM. However if you use v20f as your kdz file or any other ics kdz this will accomplish what you want.... Rooted ics. Do you have the kdz file for v20f? Or another way to look at it is the whole purpose of the before and after bat files is to maintain root when going from one rom to another. You don't have to go to Gingerbread only if you want to install CWM.
I just wish I knew why you were having to many issues.... Try this open a windows command prompt and go to the stuff folder and type the following command:
adb device
What do you get back in response?
Sent from my LG-P930 using xda app-developers app
Swetnes said:
You can follow the whole guide if you want to install CWM. However if you use v20f as your kdz file or any other ics kdz this will accomplish what you want.... Rooted ics. Do you have the kdz file for v20f? Or another way to look at it is the whole purpose of the before and after bat files is to maintain root when going from one rom to another. You don't have to go to Gingerbread only if you want to install CWM.
...
Click to expand...
Click to collapse
O, okay, I see. Well ya, at this point I just want rooted ICS...which I did have before, I just couldn't get into recovery mode as mentioned. But it seems I need to get gingerbread for that...is that right? That's why I got this error before:
---------------
Secure booting Error!
Cause : boot certification verify
-------------------------
------------------------------
Enter the fastboot...
Enter the fastboot...
Long time no see!
-------------------------------------------------
It meant that even though I had it rooted, because I had ICS it couldn't go into recovery?
As for V20f kdz, I found this thread which seems to give it to you: forum.xda-developers . com/showthread.php?t=2073620 (right?)
Swetnes said:
....
I just wish I knew why you were having to many issues.... Try this open a windows command prompt and go to the stuff folder and type the following command:
adb device
What do you get back in response?
...
Click to expand...
Click to collapse
It gives me the "List of devices attached:" and then under it my device code.
hellored said:
O, okay, I see. Well ya, at this point I just want rooted ICS...which I did have before, I just couldn't get into recovery mode as mentioned. But it seems I need to get gingerbread for that...is that right? That's why I got this error before:
---------------
Secure booting Error!
Cause : boot certification verify
-------------------------
------------------------------
Enter the fastboot...
Enter the fastboot...
Long time no see!
-------------------------------------------------
It meant that even though I had it rooted, because I had ICS it couldn't go into recovery?
As for V20f kdz, I found this thread which seems to give it to you: forum.xda-developers . com/showthread.php?t=2073620 (right?)
It gives me the "List of devices attached:" and then under it my device code.
Click to expand...
Click to collapse
I literraly had this exact error on my p930 2 days ago when a tried installing CWM for the first time. the only way i was able to unbrick the phone was following this guide.
http://forum.xda-developers.com/showthread.php?t=1784709&page=4
if you have any questions you can ask me, i just did it on my phone so i should be able to answer unless you run into a problem i didn't
At what stage do you get the secure boot error? Is it after v18f is rooted and you are doing the before and after bat files with. KDZ file?
Sent from my LG-P930 using xda app-developers app
Swetnes said:
At what stage do you get the secure boot error? Is it after v18f is rooted and you are doing the before and after bat files with. KDZ file?
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
if his problem happened the same as mine after trying to boot into cwm for the first time you get the error, becuase lg has a secure bootloader. after this i had to follow the unbrick guide, eventually you end up with at&t stock rom, then you are able to boot into cwm and install a custom rom like CM
One thing just occurred to me you need to stop at step 18 on the unbricking guide. If the KDZ that you are using is one of the v20(x)_00.kdz variants do not use adb to push the recovery.img file this WILL brick your phone and cause the secure boot error this is used to push recovery onto v10(x)_00.kdz only.
Sent from my LG-P930 using xda app-developers app
KronicSkillz said:
I literraly had this exact error on my p930 2 days ago when a tried installing CWM for the first time. the only way i was able to unbrick the phone was following this guide.
http://forum.xda-developers.com/showthread.php?t=1784709&page=4
if you have any questions you can ask me, i just did it on my phone so i should be able to answer unless you run into a problem i didn't
Click to expand...
Click to collapse
Okay thanks, I will try this guide once I get the chance and report back to you. Just a question though, I'm assuming this guide will still give me Gingerbread at the end of it, correct?
Swetnes said:
One thing just occurred to me you need to stop at step 18 on the unbricking guide. If the KDZ that you are using is one of the v20(x)_00.kdz variants do not use adb to push the recovery.img file this WILL brick your phone and cause the secure boot error this is used to push recovery onto v10(x)_00.kdz only.
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
Um, you mean stop at step 18 of the original guide you linked me or the one that KronicSkillz is suggesting? I honestly just use whatever the guide says/provides, I don't bring in any outside files. Previously I mentioned I might use another one because you suggested it would work well for me by keeping ICS. But originally I just follow the guides step by step.
hellored said:
Okay thanks, I will try this guide once I get the chance and report back to you. Just a question though, I'm assuming this guide will still give me Gingerbread at the end of it, correct?
Um, you mean stop at step 18 of the original guide you linked me or the one that KronicSkillz is suggesting? I honestly just use whatever the guide says/provides, I don't bring in any outside files. Previously I mentioned I might use another one because you suggested it would work well for me by keeping ICS. But originally I just follow the guides step by step.
Click to expand...
Click to collapse
At the end you'll end up with AT&T stock gingerbread. in the middle you'll be running a stock korean rom, but that is temporary.
as per your 2nd comment if you resintall stock ICS that will rebrick your recovery and CWM will cause another error if you ever try to run it.
this is the reason your phone had the errors you posted
Secure booting Error!
Cause : boot certification verify
-------------------------
------------------------------
Enter the fastboot...
Enter the fastboot...
Long time no see!
If the whole purpose behind this is you just want ICS why didn't you just run the LG update tool, STOCK ICS can be updated with their stock PC usb tool.
anyways its too late for that.
to save your phone you have to follow that guide to restore it to original AT&T Gingerbread. then you perform a backup with CWM and THEN you can flash whatever ROM you want on your phone be it custom or Stock ICS. I have a feeling flashing the stock ics might rebrick your recovery though. not 100% sure on if it will or not.
---------- Post added at 01:24 PM ---------- Previous post was at 01:22 PM ----------
as per your question about which guide, i think we both linked you the same guide, except the one i linked was the Sticky version that was a little more detailed (i think) but in either case you should pick one guide and stick to it don't read both of them and go back and fourth you could get easily confused even though like i said i think they are the same guide/method of unbricking. There is a reason though that the guide i linked is the TOP STICKY on the forums for this phone. Because it is the solution to unbrick all p930s who have gotten bricked, which is almost anyone who updated their phone since they bought it, a few ppl got lucky and had Roms old enough that LG hadn't locked their recovery yet and they didn't get the error you were seeing.
The only reason I suggested stopping at step 18 was because it seemed like the v20f kdz file was being installed instead of the v10f because of the secure boot error. V20f is ICS, there is no logical reason why v10f is generating the error. Which kdz file are you flashing during that step in the guide?
Sent from my LG-P930 using xda app-developers app
Related
Hi all,
I've uploaded this root method because it is the only way I have been able to get root on the first try every time.
Your results may vary. If you don't get it first try, just try again.
Here are the methods I have tried and had fail:
UnlockRoot
Doomlord v1
Doomlord v4
TPSparky
SuperOneClick (Any Version)
So here you go! Here is a method that I have had 100% success with. I will be editing the script to try and make it more clean and less work on your part in the future. I will post new versions on this thread when I get them done.
Required Downloads
LG Nitro HD Root.zip
Enabling Root Rights
Enable USB Debugging and Unknown Sources.
Unzip the zip file to the location of your choice.
Run the file named “Root.bat”.
Follow the instructions on in the CMD window.
Notes
Here is a list of the apps that I have found will brick your Nitro if removed:
AT&T Address Book
AT&T Navigator
Google Play Books*
Google Play Movies*
Google Play Music
Google Play Store/Market
removal of at&t addressbook and navigator doesn't brick your device !
i confirm this !
aaki_rocker said:
removal of at&t addressbook and navigator doesn't brick your device !
i confirm this !
Click to expand...
Click to collapse
Thank you for your input. But, I have removed both of them individually and bricked it. Also, several others have reported in other threads that it has. I believe it just depends on how much luck you have.
Just tried... no worky.
Again, I am trying to root on 2.3.5. Zerg fails, SOC wont make it past rebooting adb...
mattman86 said:
Thank you for your input. But, I have removed both of them individually and bricked it. Also, several others have reported in other threads that it has. I believe it just depends on how much luck you have.
Click to expand...
Click to collapse
Matt your instructions for root say to extract from zip, root.bat. But your link takes me to a apk root file not a zip file...
can you be more specific or maybe the link is misdirected?
are you saying this is a root method via apk from phone?
IM starting to remember why I sold my g2x....nothing changes eh LG??
freakboy13 said:
Matt your instructions for root say to extract from zip, root.bat. But your link takes me to a apk root file not a zip file...
can you be more specific or maybe the link is misdirected?
are you saying this is a root method via apk from phone?
IM starting to remember why I sold my g2x....nothing changes eh LG??
Click to expand...
Click to collapse
yes i try this and i fail to download.. the zip file..
zikario507 said:
yes i try this and i fail to download.. the zip file..
Click to expand...
Click to collapse
Hic hic,me too
Sent from my LG-P930 using xda app-developers app
I assumed he meant to download and run on the computer with phone connected through USB. Can you clarify mattman86?
Sent from my LG-P930 using xda app-developers app
AllstarE4 said:
I assumed he meant to download and run on the computer with phone connected through USB. Can you clarify mattman86?
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
But as to what? Run the apk on your pc o_0
His directions say dl zip, yet there is no zip it directs you to a page that looks like what may have been in the zip? Still not clear
The apk root ...it shows up on the phone but still unclear.
Need the link fixed or to be clarified please Mattman when you get a chance thank you.
Edit: is the zip you were refering to the lg tool that reverts you to v18f ?
If so will this work on official ics release via lg tool.
Thanks again in advance
Sent from my LG-P930 using Tapatalk 2
Terribly sorry... The privacy settings on my Google Drive must have been reset somehow.
I've fixed it so that the zip should show now.
But it now says that you have binned the file. It works right, doesn't it?
Mattman your script isnt working.
When I hit "any key to continue" it flashes..but its not flashing anything.
Cmd window turns off (checked process not running at all)
nothing happens.
No instructions , nothing. cmd. window just exits.
so guesse thats another brick wall for root on lg updated firmware to ics.
Mattman sorry but this method does not work.
Or I should say it did not work for me.
I even put togewther my own rendition of your files that you compiled still would not work.
In fact I am now convinced the ONLy root method for the nitro running it the one here:
http://forum.xda-developers.com/showthread.php?p=30209937#post30209937
Im not saying anything against your method, it looks solid, but it would not work.
I tried it on v20c and v18f.
I now have root but want to say your efforts and work are appreciated.
I hope this is not considering hijacking the thread I wanted to post this for others with the same issues.
EDIT: Mattman I been searching through the threads and seen that you initialy used this method off of 2.3.6? Meaning you rooted from 2.3.6? ( from the cwm thread you came up with a way via script to run cwm) I am wondering maybe your method only works from 2.3.6? what firmware did you originally root from?
i tried this method on my v20c and my wife is not working.. and never get root??
please help me
zikario507 said:
i tried this method on my v20c and my wife is not working.. and never get root??
please help me
Click to expand...
Click to collapse
V20c is the latest update... Please read the title of the thread.
mattman86 said:
V20c is the latest update... Please read the title of the thread.
Click to expand...
Click to collapse
yes.. i'm agree with you.. nowadays i can root with your eady guide to unbrick the phone
Does this work for anyone who has followed his steps and also 'not' on the latest firmware like Mat mentions, just want to know before I get my phone??
Instructions how to ROOT Official Bell Android 4.0.4 firmware version v20e
Original thread
0. Extract P930_v20e_ROOT folder from attached file to C: drive
1. Flash v20e firmware (you can use official tool or UpTestEX_mod2_marwin.exe method)
2. Turn on USB debugging and Unknown Sources
3. Install LG_SystemBackupTest.apk and start it
4. Wthout touching anything press&hold power button and reboot, after reboot your phone must lags (you can see it by unlock in lockscreen)
5. Connect phone to PC and start root_P880.bat
6. Wait until phone reboots several times.
7. If you get root, you can delete SystemBackupTest app that you have installed on 3d step, because phone will lag with it
ISSUE - after the root the system storage is 315 MB only
kavena78 said:
ISSUE - after the root the system storage is 315 MB only
Click to expand...
Click to collapse
No issues. 2.15Gb total space
Please see the attached image, it is showing 315mb. I am getting low space warning. Pls help
Sent from my LG-P930 using xda app-developers app
kavena78 said:
Please see the attached image, it is showing 315mb. I am getting low space warning. Pls help
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
Factory reset.
Sent from my LG-P930 using xda premium
yes it works after factory reset, thanks
Recovery Boot Error
ROM Manager recovery boot failed
Secure booting Error!
Cause: boot certification verify
Any help pls
kavena78 said:
ROM Manager recovery boot failed
Secure booting Error!
Cause: boot certification verify
Any help pls
Click to expand...
Click to collapse
You can only install CWM when coming from a Gingerbread official ROM. Meaning you have to follow unbricking instructions to downgrade to an official Gingerbread ROM, then flash CWM using that. Currently there is no CWM-flashable version of Bell's ICS though, but one will probably pop up soon.
hi and help please
5. Connect phone to PC and start root_P880.bat for this do i use mass storage or the LG software?
also when i run the root_P880.bat i get only fail and cannot open and acess denied in the command prompt
the cell reboots twice and then the command prompt window closes
i need help
thank you
edit : it worked
i'll keep y original post just to show that when you get this issue
just try agin and again and again (from run the app and reboot part)
cheers to you for finding and posting this method
Once you do this method is it possible to unroot without going through the unbricking guide and reflashing the ROM?
Edit: NVM it looks like you can do it with the SU app, it says so on the second last page of original thread.
CWM
So is anyone working on a cwm recovery image for ics now that we have an easy root method? is this a simple thing to do?
cashy57 said:
So is anyone working on a cwm recovery image for ics now that we have an easy root method? is this a simple thing to do?
Click to expand...
Click to collapse
It already exists:
Bell version - http://forum.xda-developers.com/showthread.php?t=1837533
AT&T version - http://forum.xda-developers.com/showthread.php?t=1803617
@drumist,
I think he's asking if there's a version of CWM that can be flashed while on official ICS and the answer to that is no, unfortunately not with the ****ty ICS bootloader.
Sent from my LG-P930 using Tapatalk 2
Malnilion said:
@drumist,
I think he's asking if there's a version of CWM that can be flashed while on official ICS and the answer to that is no, unfortunately not with the ****ty ICS bootloader.
Click to expand...
Click to collapse
Oops, you're right.
to unroot it s really simple
just do the update to ICS again (via the lg prog) i did it ,and it works easy
Does this root method work on the at&t model v20c also ? Thanks
Worked perfectly on the first try. Thanks
does it work on att v20c?
divingbora said:
does it work on att v20c?
Click to expand...
Click to collapse
no
Will this work on my SU640 running on V20d?
Sent from my LG-SU640 using xda premium
1. you have to be rooted and on STOCK ZV9. the easiest way in my option is to lgnpst. here is a guide http://pastebin.com/g8hXBaaA
use this v9 tot file instead of the v7 http://forum.xda-developers.com/showthread.php?t=2091883&highlight=tot
2. you need to root v9 with this guide http://forum.xda-developers.com/showthread.php?t=2050582
3. you need to download the update zip and rename it update.zip. http://d-h.st/0a9
4. you need to move update.zip to /cache using a file explorer (this is why you need root)
5. reboot into stock recovery. get into stock recovery by holding vol down+ home button+ power button until captive lights flash then release.
for some people programs such as romtoolbox's rebooter works and for others it doesnt but you can try.
6. choose "apply update from cache." then "update.zip"
7. you are now running JB.
8. restore root by using root keeper
9. if you want to reroot use the same method for zv9 above
Congrats, you have rooted jellybean!
LASTLY! Im not responsible for what you do to your phone!!!
Thanks to:
engine95
klyang88
jhgti
ALBERTOSCLN
fiddy619
kc_exactly
http://forum.xda-developers.com/showthread.php?p=38549284
any problems or fixes just let me know
javskies said:
Since people have been having problems or whatever with Kc's guide I am posting the link to the original way to flash jb which worked for me and others. All thanks go to him for making this
http://forum.xda-developers.com/showthread.php?p=38549284
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
Hey, if they follow that method won't they be soft bricked the first time they reboot their phone?
kc_exactly said:
Hey, if they follow that method won't they be soft bricked the first time they reboot their phone?
Click to expand...
Click to collapse
Welp didn't notice that was in there lol. Thanks for the catch
Sent from my LG-LS970 using xda premium
so i made an actual guide because i did this in the car since kc removed his at the time.
here is the updated version which shouldn't cause a brick except for a few that make a mistake here or there.
Noob Question about this guide
First of all, thank you all for what you do for the Android community
I am obviously a noob, so please bear with me.
I recently used engine95's guide to root and unlock my Sprint LG Optimus G. It was simple and worked perfectly. I have not yet had a chance to attempt flashing any rom's and just noticed that I can actually have Jelly Bean now. So, I am rooted and unlocked. I have recently downloaded Titanium Backup, FreeGee, ROM Manager, Voodoo OTA Rootkeeper, and ES File Explorer. I chose TWRP during the unlock procedure with FreeGee. I am now running Titanium Backup on everything (seems to be stuck at 96% with YouTube).
I am about to run through javskies guide to flashing JB (this guide just made more sense to me). I am hoping Voodoo OTA Rootkeeper will keep me from having to root again after the update, but if not, I think I can handle rooting again.
My main questions are:
1) I noticed something in another post about uninstalling FreeGee due to its current incompatibility with JB. Is this correct?
2) Looking at step 4 of javskies guide
4. you need to move update.zip to /cache using a file explorer (this is why you need root)
Click to expand...
Click to collapse
, I noticed that I do not see a file named 'cache' either when using ES File Explorer or Windows Explorer. (I haven't figured out how to paste a screenshot into a post, so I attached a JPEG screenshot.)
3) Because I did not see the /cache folder, I looked at the Flashing Guide and now I am even more confused because the steps for
ROM update without SDcard
Click to expand...
Click to collapse
seem a bit out of my leauge...or maybe I am being lazy.
4) How would you all handle a wife/significant other who wants to kill me for spending hours on end reading through posts?
Honestly, if I can grasp how to manage the .zip file correctly in this procedure, I am sure I will be fine.
Because I know it matters...quick thanks to javskies, engine95, fiddy619, and kc_exactly for (unknowingly) getting me this far. Also to _Epic, who apparently is losing his patience with Android illiterates, like myself
Good grief, I hope this post ends up looking right...it is my very first time posting...(just noticed the 'preview' button.)
Thanks guys!
Cache is a folder in the root directory. That is the very bottom of directories. If your rooted you will see it. Put the file there.
And freegee is not compatible for the jelly bean update. So, you are correct to remove it. It will cause a soft brick.
The app is safe just sitting there. But if you run it after the update you will have problems. So, I would remove it for now. Out of sight, out of mind.
Part of the steps to fix the soft brick will be too format the whole phone. So, remove it. The creator of the app is a very active member here on xda. He is working on a fix. Just check back on xda. We will all know when it is fixed.
And it doesn't bother me what guide you use. If you read the bottom of my guide it is basically the same as this one.
I am not a hater. I like to help everyone. There is no competition.
The update process is confusing for new people. There is no way around it. Just follow the steps and you will be fine.
Sent from my LG-LS970 using xda premium
---------- Post added at 09:30 PM ---------- Previous post was at 09:26 PM ----------
As for the wife. Just say what we all do.
"Honey, I am sorry, I have to fix my phone."
Or
"Hey, one sec, I have to fix my phone"
Basically, any combination of something like that usually works.
Sent from my LG-LS970 using xda premium
Also just a heads up, after u download esfile explorer, u need to go to settings and way towards the bottom there r root settings. Make sure u have the appropriate options checked so u can back out of your sdcard folder. Super user will ask u to grant permission once u check the first option. Grant it. That way u can get to that cache folder that you need.
bowhunt2005 said:
Also just a heads up, after u download esfile explorer, u need to go to settings and way towards the bottom there r root settings. Make sure u have the appropriate options checked so u can back out of your sdcard folder. Super user will ask u to grant permission once u check the first option. Grant it. That way u can get to that cache folder that you need.
Click to expand...
Click to collapse
Thank you, bowhunt. I was feeling a bit too stupid to ask again after kc's thoughtful response. I will stop googling how to access the root folder now :victory:
I cant get through step one. LGNPST keeps giving me a "the file path is empty" message
riceatusc said:
I cant get through step one. LGNPST keeps giving me a "the file path is empty" message
Click to expand...
Click to collapse
Make sure you clicked both folder icons at the bottom of the window. If you used the automatic one you should be able to pick the ls970 dll and the second one is the for the .tot you downloaded
Sent from my LG-LS970 using xda app-developers app
uncle_seuss said:
Make sure you clicked both folder icons at the bottom of the window. If you used the automatic one you should be able to pick the ls970 dll and the second one is the for the .tot you downloaded
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
Well now I feel like an idiot for missing something so simple. haha. Thanks
Finally got the downloaded zip file to the cache folder. Rebooting to recovery takes me to TWRP. Install failed. Is it because I am unlocked? Do I need to return to stock and re-root?
Sent from my LG-LS970 using xda app-developers app
ThrillerNstinct said:
Finally got the downloaded zip file to the cache folder. Rebooting to recovery takes me to TWRP. Install failed. Is it because I am unlocked? Do I need to return to stock and re-root?
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
This guide is geared more to people who are already unlocked. Check this one to flash via twrp http://forum.xda-developers.com/showthread.php?t=2169074
Sent from my LG-LS970 using xda premium
This guide worked well for me - I'm now ZVB stock rooted (not unlocked but do have FreeGee bought and installed). The hardest part was getting recovery to boot
Thanks javskies, your guide worked perfectly. I'm now back to stock rooted ZVB.
I dont know why this guide has been lost in the forums. I coudnt find it until you helped me out javskies.
This guide is perfect for those who want stock zvb that have locked phones.
EFEXR said:
Thanks javskies, your guide worked perfectly. I'm now back to stock rooted ZVB.
I dont know why this guide has been lost in the forums. I coudnt find it until you helped me out javskies.
This guide is perfect for those who want stock zvb that have locked phones.
Click to expand...
Click to collapse
No problem. This guide is now pretty much just for people in your situation since we have stock roms and the otas so not many are really going to need it. I'm very glad it helped you out and it sucks to hear that shelnutt couldn't help your situation :/
Sent from my LG-LS970 using xda premium
javskies said:
No problem. This guide is now pretty much just for people in your situation since we have stock roms and the otas so not many are really going to need it. I'm very glad it helped you out and it sucks to hear that shelnutt couldn't help your situation :/
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
Actually, shelnutt had a way but he said there was also a risk of bricking my phone. I told him I couldnt because I dont have insurance nor do I have a backup phone. I will do it his way within time once I can get a backup phone. Hopefully, within two months.
He also said there were many people in the same situation that can't unlock phone. He's also trying to find the problem and work out a solution in the future.
EFEXR said:
Actually, shelnutt had a way but he said there was also a risk of bricking my phone. I told him I couldnt because I dont have insurance nor do I have a backup phone. I will do it his way within time once I can get a backup phone. Hopefully, within two months.
He also said there were many people in the same situation that can't unlock phone. He's also trying to find the problem and work out a solution in the future.
Click to expand...
Click to collapse
good to hear he's working out the kinks! hopefully he gets its before youre replacement phone so you can flash some of the great roms for this phone. gotta love the devs lol
Hi!
I've been trying to root the LG P930 from Bell for the last couple of days, and I've tried essentially all the guides and nothing works
It's running 4.0.4 and s/w version is LG-P930-V20e-Jul-22-2012.
I'm at wits end now, trying to root it!
I tried the latest Framaroot, it didn't work, I also tried the "Root_with_Restore_by_Bin4ry_v33" method, and that kept getting an error along the lines as "couldn't find ric" folder. Another common one I tried, where I had to copy "LG_SystemBackupTest.apk" and then reboot, etc kept getting an error where it was permission denied copying superuser and busybox.
Does anyone have any suggestions on what else I can try??
Thanks!
Did you try Matman's unbricking guide? I don't think there is any way to root unless you go through the unbrick process.
audit13 said:
Did you try Matman's unbricking guide? I don't think there is any way to root unless you go through the unbrick process.
Click to expand...
Click to collapse
I haven't tried that yet, but I guess I will try that! I thought these other ways would work, but oh well! Thanks for the tip, I'll report back if it works/doesn't work :good:
angelus360 said:
I haven't tried that yet, but I guess I will try that! I thought these other ways would work, but oh well! Thanks for the tip, I'll report back if it works/doesn't work :good:
Click to expand...
Click to collapse
I believe you need to revert back to GB in order to unlock the bootloader and get root access which the unbrick process requires.
I highly recommend using a WinXP x86 machine if possible. I didn't have much luck with x64 machines.
audit13 said:
I believe you need to revert back to GB in order to unlock the bootloader and get root access which the unbrick process requires.
I highly recommend using a WinXP x86 machine if possible. I didn't have much luck with x64 machines.
Click to expand...
Click to collapse
Sounds good! Is this the unbricking guide you mentioned? There seems to be a few on the forum!
Thanks!
angelus360 said:
Sounds good! Is this the unbricking guide you mentioned? There seems to be a few on the forum!
Thanks!
Click to expand...
Click to collapse
This is the one I used on 3 different Bell P930 phones: http://forum.xda-developers.com/showthread.php?t=1784709
Is your phone unlocked? If not, it might be best to unlock it first, then install a custom rom. With a custom rom, you may not always get the prompt to enter a network unlock code.
audit13 said:
This is the one I used on 3 different Bell P930 phones: http://forum.xda-developers.com/showthread.php?t=1784709
Is your phone unlocked? If not, it might be best to unlock it first, then install a custom rom. With a custom rom, you may not always get the prompt to enter a network unlock code.
Click to expand...
Click to collapse
Yep, it is unlocked already...I'm gonna try this out tonight, internet is a bit slow here to download :good:
angelus360 said:
Yep, it is unlocked already...I'm gonna try this out tonight, internet is a bit slow here to download :good:
Click to expand...
Click to collapse
This guide worked for me great http://forum.xda-developers.com/showthread.php?t=2044645
And that was my first time rooting a phone so I guarantee you this one also works and you don't have to type cmd commands, have a quick read and decide which one to use. In the end both methods will have your phone rooted.
Truepeace said:
This guide worked for me great http://forum.xda-developers.com/showthread.php?t=2044645
And that was my first time rooting a phone so I guarantee you this one also works and you don't have to type cmd commands, have a quick read and decide which one to use. In the end both methods will have your phone rooted.
Click to expand...
Click to collapse
So I tried the Hereric method and I'm getting stuck on Step 7:
7 - Run TPSparkyRoot.bat, following the instructions in the window.
When I run the bat, it gets this error: cannot create /data/local.prop Permission denied
Any ideas?
angelus360 said:
So I tried the Hereric method and I'm getting stuck on Step 7:
7 - Run TPSparkyRoot.bat, following the instructions in the window.
When I run the bat, it gets this error: cannot create /data/local.prop Permission denied
Any ideas?
Click to expand...
Click to collapse
Try the method here under JB ROOTING. Works for me. http://forum.xda-developers.com/showthread.php?t=
Also I have a new way of installing cam so you don't need to follow Hereric's guide. I have the thread here http://forum.xda-developers.com/showthread.php?t=2598278
Sent from my LG-P930 using xda app-developers app
Swetnes said:
Try the method here under JB ROOTING. Works for me. http://forum.xda-developers.com/showthread.php?t=
Also I have a new way of installing cam so you don't need to follow Hereric's guide. I have the thread here http://forum.xda-developers.com/showthread.php?t=2598278
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
Hey Swetnes, thanks! The first link doesn't seem to goto anything?
angelus360 said:
Hey Swetnes, thanks! The first link doesn't seem to goto anything?
Click to expand...
Click to collapse
Ah, so I found it, but it says its for SU640 only? Not for P930?
angelus360 said:
Ah, so I found it, but it says its for SU640 only? Not for P930?
Click to expand...
Click to collapse
As long as its the root file it's ok. DO NOT use the cwm link it might brick your phone. Use the one from my thread
http://forum.xda-developers.com/showthread.php?t=2598278
Sent from my LG-P930 using xda app-developers app
Swetnes said:
As long as its the root file it's ok. DO NOT use the cwm link it might brick your phone. Use the one from my thread
http://forum.xda-developers.com/showthread.php?t=2598278
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
I tried that method as well and it also has the permission denied error...I'm gonna give up soon I think, nothing works!
angelus360 said:
I tried that method as well and it also has the permission denied error...I'm gonna give up soon I think, nothing works!
Click to expand...
Click to collapse
Try uninstalling the LG drivers. Reboot the computer then reinstall, then reboot. After that use the LG mobile support tool to update the phone back to v20e. Then try the root method again. Just remember to follow the steps precisely.
Sent from my LG-P930 using xda app-developers app
angelus360 said:
So I tried the Hereric method and I'm getting stuck on Step 7:
7 - Run TPSparkyRoot.bat, following the instructions in the window.
When I run the bat, it gets this error: cannot create /data/local.prop Permission denied
Any ideas?
Click to expand...
Click to collapse
Try running the CMD as administrator, I have done 3 times the hereric method and it worked.
So in the end, I managed to root, yay!!
It ended up being because of my computer it seems. I was using a macbook pro with windows on it, and it seemed to just not work. The minute I tried another PC, the hereric method worked on the first try basically
The only issue im having now is, finding a proper ROM. The Avatar ROM works, but it keeps crashing randomly for some reason, no matter the version I try
I've rooted my Bell P930 using this method http://forum.xda-developers.com/showthread.php?t=2044645 ... i was failing using windows 7, but succeeded using WINDOWS XP.
EDIT: nevermind, i just read your above post, bleeeeh =) as for you crashes, i dont really know avatar, but FULL WIPE before flashing a ROM is recommended in my experience.
FULL WIPE:
Factory reset, wipe system, wipe dache, wipe dalvik.
Flash ROM, flash gapps, reboot .... if that doesnt work you might want to try another ROM, CM10.1.3 is pretty much to more stable of all, personnaly im using CM11, not having any issues other than my phone slows down when battery is running out, still in developement.
angelus360 said:
So in the end, I managed to root, yay!!
It ended up being because of my computer it seems. I was using a macbook pro with windows on it, and it seemed to just not work. The minute I tried another PC, the hereric method worked on the first try basically
The only issue im having now is, finding a proper ROM. The Avatar ROM works, but it keeps crashing randomly for some reason, no matter the version I try
Click to expand...
Click to collapse
Congrats mate I suggest you flash one of the most popular roms the Cyanogenmod 10.1.3 (stable) which is equivalent to the stock android version 4.2.2
Unless you want to try the nightly (not stable) version of cyanogenmod 11 which refers to android kitkat.
http://download.cyanogenmod.org/?device=p930
And I recommend flashing also the WIND kernel, very friendly kernel for the battery and for the CPU.
http://forum.xda-developers.com/showthread.php?t=2119976
Don't forget to wipe your phone before flashing the custom ROM
http://forum.xda-developers.com/showthread.php?t=1926754
Just wanted to post a quick thanks to audit13, Truepeace, Swetnes and just1nsama for their help in getting this to finalllly work for me. I'm super happy that this phone is far more useful (and speedy) than before! I really appreciate it guys! :victory:
Ok I was running d3rp m1. Got the zvc upgrade notification and updated. Phone keeps rebooting into recovery.
I wiped everything except internal re installed m1. Same thing keeps rebooting into recovery.
Please someone tell me what the crap to do
Install the ZVC .tot via LG Flashtool, and in future never do OTA updates on a rooted phone along with custom recovery, custom rom.
Sent from my LG-LS980 using XDA Premium 4 mobile app
Stop making q and a threads outside q and a
Sent from my LG-LS980 using xda app-developers app
ProXyStaLLioN said:
Ok I was running d3rp m1. Got the zvc upgrade notification and updated. Phone keeps rebooting into recovery.
I wiped everything except internal re installed m1. Same thing keeps rebooting into recovery.
Please someone tell me what the crap to do
Click to expand...
Click to collapse
yeah just go to the zvc .tot page and follow it to a T it is easy peasy lemon squeezy
I have no Idea what that is or how to do it will someone break this down and put links in there post for the stuff I need and what I need to do please and thanks I can donate to someone if we can get this fixed asap
ProXyStaLLioN said:
I have no Idea what that is or how to do it will someone break this down and put links in there post for the stuff I need and what I need to do please and thanks I can donate to someone if we can get this fixed asap
Click to expand...
Click to collapse
Verizon guide, it applies to us as well just use Sprint .tot and dll:
http://forum.xda-developers.com/showthread.php?t=2448960
Remeber you need Verizon USB driver installed.
Use the dll on the bottom of this site.
http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/Sprint+LS980/
Do this for me first and foremost.
Power phone off
Push and hold volume up when you place USB cable in phone. Phone will say download mode or something similar small.
It will then proceeded to a large screen with a status bar.
If you can get there.... We can save you
Sent from my LG-LS980 using Tapatalk
abhinav.tella said:
Verizon guide, it applies to us as well just use Sprint .tot and dll:
http://forum.xda-developers.com/showthread.php?t=2448960
Remeber you need Verizon USB driver installed.
Use the dll on the bottom of this site.
http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/Sprint+LS980/
Click to expand...
Click to collapse
yea still makes no sense to me. and I cant open that dll. bad link or something
ProXyStaLLioN said:
yea still makes no sense to me. and I cant open that dll. bad link or something
Click to expand...
Click to collapse
Follow instructions in Verizon thread except paste the dll from the site I showed (It works I checked) and the ZVC.tot file in the general section. You have to extract the dll from rar file.
I am assuming your phone keeps booting to TWRP. What worked for me was from the TWRP terminal command was to type
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
then hit enter
type
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
then hit enter and reboot.
BE VERY CAREFUL NOT TO MAKE ANY SPELLING ERRORS OR YOUR PHONE MAY BE BRICKED.