Tested and works on
JB 4.1.2
JB 4.2.1
Failed on
ICS 4.04
Before I begin credits to autoprime! source http://forum.xda-developers.com/showthread.php?t=1626638
This is not a full blown walk though… so, not all of this may make much sense to everybody but for those who do understand the way this program works. It’s a very easy process!
I’m sure this has been buried in this forum.
Here’s my little guide to get update your PRL using QPST on CM10 4.1.2 on the E4GT!
Alright so it’s pretty straight forward do the basic stuff, download your E4GT drivers
(even though is probably unneeded if you have Windows Vista or 7)
Unplug your phone from your PC
Open your terminal emulator on your phone
Type in su hit enter
then copy and paste in below and hit enter.
echo 0 > /sys/class/android_usb/android0/enable
echo disable_wimax > /sys/devices/platform/i2c-gpio.17/i2c-17/17-0008/port
echo enable_cp > /sys/devices/platform/i2c-gpio.17/i2c-17/17-0008/port
echo disable_ap > /sys/devices/platform/i2c-gpio.17/i2c-17/17-0008/port
echo CP > /sys/class/sec/switch/set_usb_path
echo 1 > /sys/class/android_usb/android0/enable
Reconnect your USB to your PC.
Open device manager you’ll see SAMSUNG CDMA Technologies (if it has not automatically installed already)
If your PC does not find the driver automatically, you're going to need to install the drivers, just Google Sprint_d710_USB_Driver_v1_3_2360_0.exe and install the package.
let the drivers install.
Now open QPST configuration, click on the ports tab, then add new port
**UNCHECK show serial and usb QC diag ports only***
Then you will see a few com ports in the lets one by one - add them all
Once you’ve added them all open Service Programming and your phone should detect!
Once you're in click on roam tab / then click read from phone BOOM enter your MSL
Now you can upload what ever prl you want!
After uploading the PRL to the phone, it will not automatically reboot like on TW Roms, so reboot after flashing, then your USB ports will turn back to "normal"
Enjoy!
freakb18c1 said:
Before I begin credits to autoprime! source http://forum.xda-developers.com/showthread.php?t=1626638
This is not a full blown walk though… so, not all of this may make much sense to everybody but for those who do understand the way this program works. It’s a very easy process!
I’m sure this has been buried in this forum.
Here’s my little guide to get update your PRL using QPST on CM10 4.1.2 on the E4GT!
Alright so it’s pretty straight forward do the basic stuff, download your E4GT drivers
(even though is probably unneeded if you have Windows Vista or 7)
Open your terminal emulator on your phone
Type in su hit enter
then copy and paste in below and hit enter.
echo 0 > /sys/class/android_usb/android0/enable
echo disable_wimax > /sys/devices/platform/i2c-gpio.17/i2c-17/17-0008/port
echo enable_cp > /sys/devices/platform/i2c-gpio.17/i2c-17/17-0008/port
echo disable_ap > /sys/devices/platform/i2c-gpio.17/i2c-17/17-0008/port
echo CP > /sys/class/sec/switch/set_usb_path
echo 1 > /sys/class/android_usb/android0/enable
After doing that you should hear your usb power on and off. After that manually unplug your USB and plug it back in. Open device manager you’ll see new devices found
let the drivers install.
Now open QPST configuration, click on the ports tab, then add new port
**UNCHECK show serial and usb QC diag ports only***
Then you will see a few com ports in the lets one by one - add them all
Once you’ve added them all open Service Programming and your phone should detect!
Once you're in click on roam tab / then click read from phone BOOM enter your MSL
Now you can upload what ever prl you want!
After flashing the phone will not automatically reboot like on TW Roms, so reboot after flashing, then your USB ports will turn back to "normal"
Enjoy!
Click to expand...
Click to collapse
I would it thanks but i've reached my limit today... since when is there a limit on thanks?
This is relevant to my interests!
it worked!
Sent from an Apple killing JellyBean
Nice.. simple ey?
Sent from my SPH-D710 using xda app-developers app
very simple
Sent from an Apple killing JellyBean
can I add this or link this guide to my guide for flashing to straight talk or page plus?
Sent from an Apple killing JellyBean
moparfreak426 said:
can I add this or link this guide to my guide for flashing to straight talk or page plus?
Sent from an Apple killing JellyBean
Click to expand...
Click to collapse
Of course
freakb18c1 said:
Of course
Click to expand...
Click to collapse
alright I linked to your thread instead of putting all your info on there even though It would be easier for users, making it easier to get your Thanks.
Here's the thread if u wanna check it
http://forum.xda-developers.com/showthread.php?t=1995259
Sent from an Apple killing JellyBean
Halp?
I can't seem to get my phone "detected" by QPST Service Programming. I've attached screenshots that may help someone help me. I followed your instructions to the dot. I even tried re-installing my drivers.
Please halp?
hedggie said:
Halp?
I can't seem to get my phone "detected" by QPST Service Programming. I've attached screenshots that may help someone help me. I followed your instructions to the dot. I even tried re-installing my drivers.
Please halp?
Click to expand...
Click to collapse
Install drivers for your phone, and what's showing up just enable them both and then go in and it should let u change stuff on your phone
Sent from my SPH-D710 using xda premium
EDIT
Install drivers for your phone, and what's showing up just enable them both and then go in and it should let u change stuff on your phone
Click to expand...
Click to collapse
I did enable them and I tried to go in but it wouldn't let me change anything. As you can see on the second screenshot, the "Work Offline" option was selected. Whereas when I got it to work successfully, the "Work online or offline" option was selected, and my phone was in the table in the latter option.
/EDIT
I think it's safe to assume that something went wrong when I pasted those commands into the terminal. Perhaps you must paste one at a time and press enter? I just pasted them all and pressed enter... I dunno, I was too lazy to try.
Whatever the case may have been, after a bit of searching around I found that I could access the menu on the dialer by using *#*#8778#*#* but only if I left it on the PhoneUtil screen while plugging it in and while using QPST (after selecting modem for both USB and UART.)
But regardless, thanks for the guide!
+1 from me
hedggie said:
EDIT
I did enable them and I tried to go in but it wouldn't let me change anything. As you can see on the second screenshot, the "Work Offline" option was selected. Whereas when I got it to work successfully, the "Work online or offline" option was selected, and my phone was in the table in the latter option.
/EDIT
I think it's safe to assume that something went wrong when I pasted those commands into the terminal. Perhaps you must paste one at a time and press enter? I just pasted them all and pressed enter... I dunno, I was too lazy to try.
Whatever the case may have been, after a bit of searching around I found that I could access the menu on the dialer by using *#*#8778#*#* but only if I left it on the PhoneUtil screen while plugging it in and while using QPST (after selecting modem for both USB and UART.)
But regardless, thanks for the guide!
+1 from me
Click to expand...
Click to collapse
I had to use the terminal method here. The dialer code worked but putting it in modem didn't do anything. Maybe bad USB cable?
Sent from my SPH-D710 using xda premium
moparfreak426 said:
I would it thanks but i've reached my limit today... since when is there a limit on thanks?
Click to expand...
Click to collapse
The very idea of putting limits on the expression of gratitude is beyond ridiculous.
sent from my ET4G on Paranoid Android using XDA Premium HD in hybrid mode
kchannel9 said:
The very idea of putting limits on the expression of gratitude is beyond ridiculous.
sent from my ET4G on Paranoid Android using XDA Premium HD in hybrid mode
Click to expand...
Click to collapse
I agree. But i found out in the xda app you have unlimited thanks
Sent from my SPH-D710 using xda premium
Cool, thanks for this!
Sent from my SPH-D710 using xda premium
all i have to say is you are a genius!!!, was struggling with updating my prl for past few days!!. Now the only questions remains is how to stop sprint from re updating my prl!!!! every time i change it, it resets in a day or two to stock and i end up with no signal.
I would love to update my PRL since I've been using CM10, but I need someone to walk me through this like I'm a 5 year old. I know how to follow step-by-step instructions, I just don't have all the pieces to the puzzle (i.e. where to get QPST and a PRL). I think that simplifying this for your everyday-Joe customizer would be a great asset. I REALLY don't want to flash to stock just to update my Profile and PRL, then flash everything back.
thejawa said:
I would love to update my PRL since I've been using CM10, but I need someone to walk me through this like I'm a 5 year old. I know how to follow step-by-step instructions, I just don't have all the pieces to the puzzle (i.e. where to get QPST and a PRL). I think that simplifying this for your everyday-Joe customizer would be a great asset. I REALLY don't want to flash to stock just to update my Profile and PRL, then flash everything back.
Click to expand...
Click to collapse
Ill help you. I have links to everything in my thread and u can txt me. Ill pm u my number
http://forum.xda-developers.com/showthread.php?t=1995259
Sent from my SPH-D710 using xda premium
heyPrm Vincent
What's the latest version of QPST? And where might I be able to get it from?
Related
I am completely new to Android and all of this flashing stuff. This is my first tutorial hope it helps some out there. I really couldn't find one tutorial that helped me completely so I put stuff I used from many into one.
MAKE SURE YOUR ESN IS CLEAN AND NOT A STOLEN PHONE. IN MY CASE IT WAS A CLEAN ONE.
What you need:
1. QPST 2.7 Build 323 (Look it up yourself and download it)
2. ADB and DIAG drivers here
3. The 60650.prl from this site http://www.corolada.com/prl/
Here are the steps.
1. Make sure that your Evo's drivers are all installed. By that I mean the ADB and HTC DIAG drivers.
2. Dial ##3424# which will put your phone in Diag mode, and enable usb debugging.
3. You can follow this to install the DIAG and ADB drivers.
http://forum.xda-developers.com/showthread.php?t=697487&highlight=cdma+workshop
4. Once done installing the DIAG driver make sure you're still on device manager.
Make sure you see this below:
Now right click on HTC USB Modem and click properties, and something like this will come up:
take note of the port # on the top, in my case COM4
5. Now open CDMA workshop in Administrator mode. Right click Run as Admin. This will come up:
6. Click on connect on the bottom right, on the bottom left it should say "Connected to (your COM name) port successfully" in my case COM4
7. Click on other and make sure it says NAM1 for the first flash. Click write and browse for the 60650.prl and select it press open. Something like the second image should pop out, just press ok the prl has been flashed.
8. Now where it previously said NAM1 press the arrow down and click NAM2. Click write and browse again for 60650.prl do the same as step 7.
9. You are done. Close CDMA workshop. Reboot your EVO.
10. Go to update your PRL
11. Punch ##3282# hit edit type your MSL pass, go to Data Profile, hit menu and hit RESET.
12. Reboot once more and youre good to reactivate your EVO.
Sources:
http://forum.xda-developers.com/showthread.php?t=937652
http://forum.xda-developers.com/showthread.php?t=898628
http://forum.xda-developers.com/showthread.php?t=737594
http://forum.xda-developers.com/showthread.php?t=697487
http://www.corolada.com/prl/
REMEMBER FLASHING IS AT YOUR OWN RISK AND I AM NOT HELD RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR PHONE (IM NOT SAYING THAT ANYTHING BAD IS GOING TO HAPPEN). I JUST SAY THIS TO PROTECT MYSELF. THIS WORKED FOR ME, I HOPE IT WORKS FOR YOU.
My proof:
Today in my room at 11AM with Metro PCS prl (Look at the bars XD)
Today at 7PM in my room with Sprint prl (Look at the bars)
But people need to be reminded, if You bought a *STOLEN* Sprint evo (one that has been reported) it won't work on Sprint.
So make sure you check the ESN with Sprint before hand.
Yes ill edit that into the post thanks bro.
Sent from my PC36100 using XDA App
i posted this in the wrong section is there a way this can be deleted or reposted in the development section?
hey, do you think this will work for the evo shift?
EDIT:
I followed your instructions which are pretty simple to the letter, after rebooting, im still stuck with metro prl. I tried updating it with using wifi, but no luck.
EDIT2: Whats weird i that the "sprint zone" msg comes up, so some kind of progress was made..... to be continued upon further discoveries!!
Edit3: Ok, it finally took after resetting the phone a few times, and it does show the new prl. But now, it takes forever to update the prl. The only other prob is I cannot find my msl code, neither thru msl reader or cdma workshop, they both tell me its 6 zero's. Boy oh boy!!!
Hello pediz123
I have couple questions on your tutorial.
1. Is it possible if I use DEMO-CDMA Workshop with your tutorial? I went to the link they gave me the demo version.
2. In your tutorial, I dont see when you run "QPST 2.7 Build 323". What is it for?
Thanks
inw
having never used Linux before and wanting to root with AlphaRev, would anybody that has been successful with root mind summarizing all the steps that are being desecribed in the other post?
http://forum.xda-developers.com/showthread.php?t=1160511
kind of getting lost with all the various steps being talked about in there.
really appreciate it.
thanks
-Go to ubuntu.com
-Click the big orange "Get Ubuntu" button, then "Try it from a CD or USB stick"
-Follow their details for downloading and installing onto a USB drive
-Once you are booted into Ubuntu, set up your network, whether WiFi or wired. Should pop up on the upper right corner
-Plug in your phone (make sure USB debugging is on). A "restricted drivers" icon should pop up in the upper right. Click it and tell it to use them.
-Use Firefox and download the beta from the alphrevx link. Open the file from Firefox, and in the archive manager, tell it to extract to your desktop.
-Click the applications tab on the left, click show all next to installed programs, and select Terminal
-type "cd Desktop"
-type "sudo ./alpharevx"
-Follow their instructions
Hopefully that helps a bit.
Amazing
You rock! Thank you for simple instructions for us non-Linux Users, worked perfectly!
cambunch said:
-Go to ubuntu.com
-Click the big orange "Get Ubuntu" button, then "Try it from a CD or USB stick"
-Follow their details for downloading and installing onto a USB drive
-Once you are booted into Ubuntu, set up your network, whether WiFi or wired. Should pop up on the upper right corner
-Plug in your phone (make sure USB debugging is on). A "restricted drivers" icon should pop up in the upper right. Click it and tell it to use them.
-Use Firefox and download the beta from the alphrevx link. Open the file from Firefox, and in the archive manager, tell it to extract to your desktop.
-Click the applications tab on the left, click show all next to installed programs, and select Terminal
-type "cd Desktop"
-type "sudo ./alpharevx"
-Follow their instructions
Hopefully that helps a bit.
Click to expand...
Click to collapse
Will this work with no internet on the pc? Because I have all the files and I'm about to make a live disk and just run off that and if so how would I install cwm after
Sent from my ADR6350 using XDA App
bradsinram said:
Will this work with no internet on the pc? Because I have all the files and I'm about to make a live disk and just run off that and if so how would I install cwm after
Sent from my ADR6350 using XDA App
Click to expand...
Click to collapse
You would need to download it and install under Windows using this thread:
http://forum.xda-developers.com/showthread.php?t=1134520
Aside from that, just copy the alphrevx binary to the Desktop via flash drive, and it should work just fine
-Plug in your phone (make sure USB debugging is on). A "restricted drivers" icon should pop up in the upper right. Click it and tell it to use them.
not getting this popup...what should made USB sync option be? didnt think step would mess me up lol
guess i should event bother trying..looks like im on baseband 0.99
now what
bettadaze said:
guess i should event bother trying..looks like im on baseband 0.99
now what
Click to expand...
Click to collapse
Someone in the alpharevx irc channel (I believe it was attn1) said a downgrade to 0.97 would be coming but that's really all the details they gave.
thanks for the update. perhaps will get lucky and they will include it with the rereleased windows version.
bettadaze said:
having never used Linux before and wanting to root with AlphaRev, would anybody that has been successful with root mind summarizing all the steps that are being desecribed in the other post?
http://forum.xda-developers.com/showthread.php?t=1160511
kind of getting lost with all the various steps being talked about in there.
really appreciate it.
thanks
Click to expand...
Click to collapse
This is a general section post. *shakes fist at you*
I've burned my ubuntu live disk in 64bit, but for some reason, when i boot it up on my HP dv2945se, the screen is distorted by these horizontal lines and no adjustments to Monitor Settings would get rid of them. I'm also having trouble getting my computers built in wireless router to be seen by Ubuntu... save me! i'm a helpless Linux n00b!!!
A good idea is to use virtual box. Free and you won't worry about rebooting or video distortion
Sent from my ADR6350 using XDA App
Well, thanks guys. I succeeded only after typing it in like 3 times (not sure how the hell I was doing it wrong, but suddenly - it worked.)
S-OFF w/ recovery in 30 seconds
Now just to teach myself about the rest of android tweaking now that root has opened her legs for us...
Nachobass25 said:
I've burned my ubuntu live disk in 64bit, but for some reason, when i boot it up on my HP dv2945se, the screen is distorted by these horizontal lines and no adjustments to Monitor Settings would get rid of them. I'm also having trouble getting my computers built in wireless router to be seen by Ubuntu... save me! i'm a helpless Linux n00b!!!
Click to expand...
Click to collapse
There are different versions of ubuntu (x86, etc). Whatever one you downloaded is the wrong one. The other should work.
Carelessly swyped on my phone so there may be some weird typos
collinray said:
A good idea is to use virtual box. Free and you won't worry about rebooting or video distortion
Sent from my ADR6350 using XDA App
Click to expand...
Click to collapse
The free version if virtual box doesn't have the usb support needed. I didn't try it but people who used wubi claimed errors. The live cd worked fine for me.
Carelessly swyped on my phone so there may be some weird typos
I rooted my incredible using WUBI with no problems whatsoever.
I'm hurting for some one on one help
Sent from my ADR6350 using Tapatalk
Well I have a question to our devs. Is there any one way to logcat that is preferred over another? I never have done logcat to determine issues for our device and I would like to start. I know there are a couple apps on the play store that are useful like aLogcat or Catlog. I know its best to use adb and even run the command in terminal emulator.
There is a great guide here that I've been referring to http://forum.xda-developers.com/showthread.php?t=1726238
And DONT forget to thank paxChristos for the guide.
In short I want to logcat to help out our devs as much as possible so is there any requirements that you like to see for a logcat? Should I/we try and duplicate the issue a certain amount of times while doing the logcat? Any feedback would be useful.
Thanks to everyone who makes these devices we have just that much better. And keep up the great work.:thumbup::thumbup:
Adb is always the best and easiest way. Always be sure to use -v long when logcatting as it's makes our lives 10 times more easier. Personal favorite log cat guide is this
http://forum.xda-developers.com/showthread.php?t=1378491
Sent from my Nexus 7 using xda app-developers app
sinfulgray said:
Well I have a question to our devs. Is there any one way to logcat that is preferred over another? I never have done logcat to determine issues for our device and I would like to start. I know there are a couple apps on the play store that are useful like aLogcat or Catlog. I know its best to use adb and even run the command in terminal emulator.
There is a great guide here that I've been referring to http://forum.xda-developers.com/showthread.php?t=1726238
And DONT forget to thank paxChristos for the guide.
In short I want to logcat to help out our devs as much as possible so is there any requirements that you like to see for a logcat? Should I/we try and duplicate the issue a certain amount of times while doing the logcat? Any feedback would be useful.
Thanks to everyone who makes these devices we have just that much better. And keep up the great work.:thumbup::thumbup:
Click to expand...
Click to collapse
I think this will work for you
http://forum.xda-developers.com/showthread.php?p=37825398
sent from my htc pico
ADB is a great way to do it. The two guides stated above should help teach you how to logat.
Sent from my Nexus 4 using xda premium
For some reason i can not get my device to connect to adb, Ive never had this problem before and my my old G2x connects just fine. Ive uninstalled the drivers and reinstalled with no luck. Also went as far back as uninstalling the drivers and odin back to stock to try and have them reinstalledwith no luck. Any ideas?
sinfulgray said:
For some reason i can not get my device to connect to adb, Ive never had this problem before and my my old G2x connects just fine. Ive uninstalled the drivers and reinstalled with no luck. Also went as far back as uninstalling the drivers and odin back to stock to try and have them reinstalledwith no luck. Any ideas?
Click to expand...
Click to collapse
Try installing the regular ADB drivers then. I linked a Google search for "Samsung adb drivers".
Damn still can not connect, I've tried to uninstall Google USB driver and Samsung USB drivers and they uninstall and install just fine witj a reboot in between of course but phone is still not connected. I'm my device manager on the PC under other devices it shows 4 android devices all with yellow caution signs.
Now my G2x won't show either lol Going to try and completely remove ADB and reinstall and see what happens.
Sent from my SGH-T989 using xda premium
sinfulgray said:
Damn still can not connect, I've tried to uninstall Google USB driver and Samsung USB drivers and they uninstall and install just fine witj a reboot in between of course but phone is still not connected. I'm my device manager on the PC under other devices it shows 4 android devices all with yellow caution signs.
Now my G2x won't show either lol Going to try and completely remove ADB and reinstall and see what happens.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
If using Windows you must run the command prompt [cmd] as an admin be sure to do the following in Win 7:
click start type cmd in the white box and wait as it searches. When it lists cmd in that list now right click and choose run as admin.
Also you need to enable developer options [go to settings about device and tap the build ID like 7 times [as you tap it, it should count down after the first couple taps once you hit it enough it will say you have enabled developer options if you don't see them in settings already]
Be sure to hit the on off switch in upper right of window when you first tap developer options if the options are greyed out and don't let you change anything
Now in developer options be sure to go to the option where it says enable root access and be sure it says apps AND ADB if it says apps only tap that and change it to Apps and ADB.
Now try again
BTW I love CatLog it has a home screen widget that can start / stop recording for you] so if you know how to produce the problem go to home screen tap the widget go through the steps until the error occurs go back to home screen tap widget again and it stops then look in /sdcard/catlog/ and it will have text files named with the date and time and that will be the entire log cat that happened between the time you started and stopped the recording of your actions.
I have been trying rigorously to flash the Galaxy Nexus until I stumbled onto urhaxable's script! I didn't find any simplified versions of it so I thought I would post a tutorial to help other like me. BTW this is my first post so please take it easy on me
If you have been trying to flash the Galaxy Nexus CDMA with no donor to PP look no further. ** Wont work with Verizon with bad ESN. If you are trying to flash to 3G with donor checkout primes tutorial http://forum.xda-developers.com/showthread.php?t=1696621.
1. Root your device and Install the toroplus AOKP ROM because it's easier to change PRL and get into DIAG:http://goo.im/devs/aokp/toroplus/aokp_toroplus_jb-mr1_build-5.zip
2.Download drivers for the Galaxy Nexus 32bit: http://www.mediafire.com/?c21e22x75a9ocpb 64bit: http://d-h.st/v3n
3.Download the programming software called ETS, because the Galaxy Nexus has a VIA chip set not a Qualcomm : http://www.digzip.com/files/1PAPNCQU/homework.html
4. After you have done all the above change you PRL download :http://www.howardforums.com/attachment.php?attachmentid=79544&d=1331322180 then rename the file to test.prl and put it into your the root of your phone. After you've done that go to setting>sprint tools>roaming and click old school.
5. The phone must restart, after it restarts you will still see sprint on the phone but don't freak out the PRL is modified for Sprint.
6. Enable debugging by going to developer if you don't have you can enable it by going into about phone and scrolling all the way down to build number and clicking it six times until it tells you that Developer is enabled. After doing that go to developer and enable debugging.
7. Enable USB DIAG by going into setting>sprint tools> Advanced and checking USA DIAG mode.
8. Open up ETS determine what COMM your phone is plugged into and go to ETS and bring down debug>COMM>USB and select the COMM your phone is plugged in. If it's the right one you should see the it's connected to make sure it is connected go to debug>start up commands.
9. When everything is ready to go go to ETS>Utilities>Script utility and copy this script that is provided by urhaxable go send him a thanks!
Script:http://gogreeninyourhome.com/go-green-files/PagePlusFullFlash.srp copy the script and paste it in script utility and follow the instructions on the script!
10. If it doesn't work then maybe you didn't put MIN in the right place. To put it manually call *#*#your MSL#*#* then go to edit put in your MSL and click MSID and change it to your MSID to the MIN that was provided by PP or dealer.
If you it still doesn't work try and try again and if tried and tried shoot me a PM!
Credits: autoprime, urhaxable, and pclover
.
So does the No Donor script allow 3G access or do you have to have a donor?
I've got mine working with a DInc donor, but would like to do away with the whole donor thing, due to grey legal area.
N3M3515
I'm sorry you need to have a donor to get 3G working. Even if though it says you have 3G you don't. And it's not illegal to copy info from a donor phone as long as you own both phones, so don't worry about that
Sent from my Galaxy Nexus using xda app-developers app
Mercy300 said:
I have been trying rigorously to flash the Galaxy Nexus until I stumbled onto urhaxable's script! I didn't find any simplified versions of it so I thought I would post a tutorial to help other like me. BTW this is my first post so please take it easy on me
If you have been trying to flash the Galaxy Nexus CDMA with no donor to PP look no further. ** Wont work with Verizon with bad ESN. If you are trying to flash to 3G with donor checkout primes tutorial http://forum.xda-developers.com/showthread.php?t=1696621.
1. Root your device and Install the toroplus AOKP ROM because it's easier to change PRL and get into DIAG:http://goo.im/devs/aokp/toroplus/aokp_toroplus_jb-mr1_build-5.zip
2.Download drivers for the Galaxy Nexus 32bit: http://www.mediafire.com/?c21e22x75a9ocpb 64bit: http://d-h.st/v3n
3.Download the programming software called ETS, because the Galaxy Nexus has a VIA chip set not a Qualcomm : http://www.digzip.com/files/1PAPNCQU/homework.html
4. After you have done all the above change you PRL download :http://www.howardforums.com/attachment.php?attachmentid=79544&d=1331322180 then rename the file to test.prl and put it into your the root of your phone. After you've done that go to setting>sprint tools>roaming and click old school.
5. The phone must restart, after it restarts you will still see sprint on the phone but don't freak out the PRL is modified for Sprint.
6. Enable debugging by going to developer if you don't have you can enable it by going into about phone and scrolling all the way down to build number and clicking it six times until it tells you that Developer is enabled. After doing that go to developer and enable debugging.
7. Enable USB DIAG by going into setting>sprint tools> Advanced and checking USA DIAG mode.
8. Open up ETS determine what COMM your phone is plugged into and go to ETS and bring down debug>COMM>USB and select the COMM your phone is plugged in. If it's the right one you should see the it's connected to make sure it is connected go to debug>start up commands.
9. When everything is ready to go go to ETS>Utilities>Script utility and copy this script that is provided by urhaxable go send him a thanks!
Script:http://gogreeninyourhome.com/go-green-files/PagePlusFullFlash.srp copy the script and paste it in script utility and follow the instructions on the script!
10. If it doesn't work then maybe you didn't put MIN in the right place. To put it manually call *#*#your MSL#*#* then go to edit put in your MSL and click MSID and change it to your MSID to the MIN that was provided by PP or dealer.
If you it still doesn't work try and try again and if tried and tried shoot me a PM!
Credits: autoprime, urhaxable, and pclover
.
Click to expand...
Click to collapse
I think your homework link is messed up. Takes you to another page where you have to click on another link to click on another link to get no where but a bunch of pop-ups.
jemcon said:
I think your homework link is messed up. Takes you to another page where you have to click on another link to click on another link to get no where but a bunch of pop-ups.
Click to expand...
Click to collapse
Which link are you talking about? I checked them and there's nothing wrong?
This works forThe sprint galaxia nex?
Or I need other tutorial? Thanks
Sent from my XT910 using Xparent Red Tapatalk 2
maniacopr said:
This works forThe sprint galaxia nex?
Or I need other tutorial? Thanks
Sent from my XT910 using Xparent Red Tapatalk 2
Click to expand...
Click to collapse
Yes it will work for toroplus
VZW Galaxy Nexus to Pageplus%^&*()
Mercy300 said:
I have been trying rigorously to flash the Galaxy Nexus until I stumbled onto urhaxable's script! I didn't find any simplified versions of it so I thought I would post a tutorial to help other like me. BTW this is my first post so please take it easy on me
If you have been trying to flash the Galaxy Nexus CDMA with no donor to PP look no further. ** Wont work with Verizon with bad ESN. If you are trying to flash to 3G with donor checkout primes tutorial http://forum.xda-developers.com/showthread.php?t=1696621.
1. Root your device and Install the toroplus AOKP ROM because it's easier to change PRL and get into DIAG:http://goo.im/devs/aokp/toroplus/aokp_toroplus_jb-mr1_build-5.zip
2.Download drivers for the Galaxy Nexus 32bit: http://www.mediafire.com/?c21e22x75a9ocpb 64bit: http://d-h.st/v3n
3.Download the programming software called ETS, because the Galaxy Nexus has a VIA chip set not a Qualcomm : http://www.digzip.com/files/1PAPNCQU/homework.html
4. After you have done all the above change you PRL download :http://www.howardforums.com/attachment.php?attachmentid=79544&d=1331322180 then rename the file to test.prl and put it into your the root of your phone. After you've done that go to setting>sprint tools>roaming and click old school.
5. The phone must restart, after it restarts you will still see sprint on the phone but don't freak out the PRL is modified for Sprint.
6. Enable debugging by going to developer if you don't have you can enable it by going into about phone and scrolling all the way down to build number and clicking it six times until it tells you that Developer is enabled. After doing that go to developer and enable debugging.
7. Enable USB DIAG by going into setting>sprint tools> Advanced and checking USA DIAG mode.
8. Open up ETS determine what COMM your phone is plugged into and go to ETS and bring down debug>COMM>USB and select the COMM your phone is plugged in. If it's the right one you should see the it's connected to make sure it is connected go to debug>start up commands.
9. When everything is ready to go go to ETS>Utilities>Script utility and copy this script that is provided by urhaxable go send him a thanks!
Script:http://gogreeninyourhome.com/go-green-files/PagePlusFullFlash.srp copy the script and paste it in script utility and follow the instructions on the script!
10. If it doesn't work then maybe you didn't put MIN in the right place. To put it manually call *#*#your MSL#*#* then go to edit put in your MSL and click MSID and change it to your MSID to the MIN that was provided by PP or dealer.
If you it still doesn't work try and try again and if tried and tried shoot me a PM!
Credits: autoprime, urhaxable, and pclover
.
Click to expand...
Click to collapse
Thank you for this. I have managed to make a pageplus call but and Everything is fine until I reboot!! All the values reset to unknown.. any help is appreciated.
I know that it was foolish of me to not fully research this set of commands I have copied the before and after of tit all from the command line. I was attempting to mess around with my phone with QPST. I know, I can REALLY REALLY make things hideous if I don't tread carefully with QPST, but I am willing to take the risk in order to learn, even if I do get burned because my phone bursts into flames.
Any who here is the output from my commandline which I ran because using *#0808# and switching to either RNDIS+DM+MODEM or DM+MODEM+ADB didn't make my phone visible for QPST. And I also tried while in recovery, download mode, and all the other settings in the *#0808# menu, plus variations of the menu and then booting into recovery, normal boot, and download mode. All to no avail, then in frustration I tried the following and it's gotten to the point I can't see my phone via adb anymore. So could someone please give me the undo set of commands for typing into my phones terminal as I can't type them via my computer due to adb not seeing it anymore? Thanks
C:\Users\xxxxx>adb devices
List of devices attached
0123456789ABCDEF device
C:\Users\xxxxx>adb shell
$ echo MODEM USB > /sys/class/sec/switch/usb_sel
echo MODEM USB > /sys/class/sec/switch/usb_sel
cannot create /sys/class/sec/switch/usb_sel: permission denied
$ su
su
# echo MODEM USB > /sys/class/sec/switch/usb_sel
C:\Users\xxxxx>adb shell
error: device not found
Oh!, and if anyone can explain either what the commands did or better yet where I can go read about such commands and what they do that would be great too. Thanks
Not sure how relevant this is or if it will help you but this man seems to be in kinda the same boat, why don't you take a look at this thread particularly post #2 http://forum.slimroms.net/topic/2008-broken-usbuart-path-causing-loss-of-adb/
Sent from my Nexus 7 2013 using Tapatalk
crazymonkey05 said:
Not sure how relevant this is or if it will help you but this man seems to be in kinda the same boat, why don't you take a look at this thread particularly post #2 http://forum.slimroms.net/topic/2008-broken-usbuart-path-causing-loss-of-adb/
Sent from my Nexus 7 2013 using Tapatalk
Click to expand...
Click to collapse
Thank you for the link I haven't tried anything based on the information yet, actually haven't read it all yet. Very complex stuff just lets me know how far I have to go. Odd thing is that I now for some reason have ADB working again. I did a factory reset recently and the other day I reinstalled/refreshed my computer. My computer was infected by a bunch of viruses and malware the phone was just sluggish and I had way more apps I wanted rid of than to keep. Anyway, I don't know if the virus on my system had anything to do with the malfunction or if it was the command I used but for now it is back to working.
I was working on a friends HTC Desire and was having a hell of a time getting fastboot commands to work. I got hboot USB working but when giving a command it would generate a "device connected toi USB has malfunctioned" also the USB ports would shut off untill reboot too intermittantly and even my wifi three or four days ago became disabled and I reset the adapter fine for 5mins then it went a level deeper and deeper till I reinstalled the driver. That being said it is more likely that it was the virus and or the person messing with my system that was causing all the grief. They even triggered email alerts on a couple of my accounts that passwords were input wrong 5 times in a row and that some security settings were being changed. Hopefully I have dealt with that if not I'll have to wait till they get bored. Sorry if that was a little off topic it sort of conencts to my recent problems.