Hi,
Please try "my" TF300T kernel for Cyanogenmod 10.1 nightlies (as of March 9th, i.e. 4.2.2). It has
- CPU Overclock to 1.7 (thanks to tf700t and untermensch's kernel)
- Various speed improvements from Nvidia kernels and mainly from Fanco's grouper kernel
- Sys interfaces for: GPU overclocking, undervolting etc. (also taken from Franco)
Disclaimer:
- The undervolting part needs to be reviewed. Not 100% sure this works all fine.
- Usage of Franco's Kernel App on the Market (or other apps) to overclock/undervolt/gpu overclock should be possible, as it uses same sysfs. Trickster mod seems to work fine, too.
Source code is here:
https://github.com/chrmhoffmann/android_kernel_asus_tf300t-1/tree/performance
Changelog 0.3:
- more tcp congestion algos added (westwood, etc)
Changelog 0.2:
- make an update.zip
- fix undervolting ladder
- make fsync on by default (if it crashes during undervolting, it might screw u - like me)
Files:
File: http://goo.im/devs/chrmhoffmann/asus/tf300t/perf-kernel/perf-kernel-CHRMHOFFMANN-0.3-signed.zip
MD5: 5babc98dbcc10e5c703868a1c39928ae
Older versions:
File: http://goo.im/devs/chrmhoffmann/asus/tf300t/perf-kernel/perf-kernel-CHRMHOFFMANN-0.2-signed.zip
MD5: fe771e0fcb26a66e09e581625ce27f2d
---
boot.img is here:
File: http://goo.im/devs/chrmhoffmann/asus/tf300t/perf-kernel/boot-perf-kernel-tf300t-cm10.1-0.1.img
MD5: 808b8e81148d0952e6e61ab30f67616c
---
Installation via fastboot (taken from XpLoDWilD's recovery install guide, thx!):
Shutdown your tablet
Hold Power + Vol Down until a message appears (it doesn't appear anymore on Jelly Bean bootloader) ("Press Vol. Up to enter RCK (5s)") : DON'T PRESS VOL UP
After 5 seconds, a new menu appears (if it's not already there). Press Vol Down once to change to the USB icon, then press Vol. Up to validate (you have to do this in less than 10 seconds, otherwise your tablet will boot Android OS)
At this point, your computer should recognize Fastboot device (Windows will notify you here, OSX/Linux stays calm)
Flash image with fastboot: "fastboot -i 0x0B05 flash boot boot-perf-kernel-tf300t-cm10.1-0.1.img" (if we suppose the .img is in your current directory)
Once the operation is done, type "fastboot -i 0x0B05 reboot" to reboot your tablet
Many thx go to:
- Untermensch, Francisco Franco, TF700T devs, XpLoDWilD for CM10.1, etc.
Press like, if you like and it works for you.
Chris
Reserved as usual
Chris
Re: CM10.1: Perf Kernel based on Franco, unter, tf700t et al (version 0.1)
Can you make a flashable zip?
And is it based on Asus stock or CM10.1 kernel?
Sent from my TF300T using xda premium
ilyuha1108 said:
Can you make a flashable zip?
And is it based on Asus stock or CM10.1 kernel?
Sent from my TF300T using xda premium
Click to expand...
Click to collapse
It is made on top of cm10.1.
I might do flashable zip, but isn't fastboot faster anyway?
Chris
Re: CM10.1: Perf Kernel based on Franco, unter, tf700t et al (version 0.1)
chrmhoffmann said:
It is made on top of cm10.1.
I might do flashable zip, but isn't fastboot faster anyway?
Chris
Click to expand...
Click to collapse
Its the same.. Zipfiles are easy'r... We dont need a pc then..
Sent from my C6603 using xda premium
Re: CM10.1: Perf Kernel based on Franco, unter, tf700t et al (version 0.1)
Yeah, zip is helpful, when a pc is far from you.
Okey, Ive been using this kernel and I have mixed feelings. It is great for games and for battery (its about 10%=35 min), but my device becomes hot and I have some lags in UI (but it is very flexible for settings and Im too lazy to set it properly). Looking forward to new builds and advises from users
Sent from my TF300T using xda premium
Please any chance you could add TG support in this kernel, i.e. for the TF300TG device?
Would also like to see a zip, but hey its your thread.
Well this is fantastic to see. I'll be sure to test this kernel out tonight.
nice to see another dev for our Tf300
Re: CM10.1: Perf Kernel based on Franco, unter, tf700t et al (version 0.1)
A new shiny kernel for our TF300T!! And for CM10.1! Can't wait to try it
Sent from my TF300T using Tapatalk 2
Does anyone know if it will read ext SD card over 4gb? Because clemysyns wouldn't. Got burned once when all my backups were on external SD and couldn't restore
Re: CM10.1: Perf Kernel based on Franco, unter, tf700t et al (version 0.1)
Moe5508 said:
Please any chance you could add TG support in this kernel, i.e. for the TF300TG device?
Click to expand...
Click to collapse
I don't have that device. Does it have cyanogen mod support?
Chris
Sent from my Barnes & Noble Nook Tablet using xda app-developers app
First impressions just after flashing it and using Francos App
- I can see this kernel uses the up to date Interactive governor which is excellent and I can already feel the difference.
- Voltage settings are definitely not working... Rom Toolbox shows the error "Failed getting voltages" and Francos App shows each frequency step upon in the tens of hundreds ghz range. Actual steps are fine as far as I can tell. It can go all the way up to 1700 mhz.
- Max GPU frequency is set to 600 mhz by default and in Francos App was able to set it to 484 (my preference)
- Max companion core can be set though I have no messed with it yet and is currently showing 600 mhz.
That's my observations so far. Getting working undervolting would be awesome and I have 5 bucks waiting for you if you can get the westwood tcp algorithm along with undervolting working chrmhoffmann :angel:
Edit: Just curious chrmhoffmann. Since you pulled quite a bit from Francos kernel from the nexus 7 did you also pull the part that disables the companion core and just uses efficient hot plugging instead?
I'm dying to try this but am not close to computer... A flashable .zip would be very very handy. I only used fastboot to first root the tf300t. Havent touched a computer since.
TF300TL wifi
May I ask to insert Tf300TL wifi drivers at least? CM 10.1 works super fast but wifi keeps turning on forever..
Re: CM10.1: Perf Kernel based on Franco, unter, tf700t et al (version 0.1)
g2tegg said:
I'm dying to try this but am not close to computer... A flashable .zip would be very very handy. I only used fastboot to first root the tf300t. Havent touched a computer since.
Click to expand...
Click to collapse
Yes, a zip file would be good. It's the laziness best friend ahahah
Sent from my TF300T using Tapatalk 2
Re: CM10.1: Perf Kernel based on Franco, unter, tf700t et al (version 0.1)
Thank you this ought to help me out quite a bit!!
Sent from my Transformer Pad TF300T using xda premium
Re: CM10.1: Perf Kernel based on Franco, unter, tf700t et al (version 0.1)
joelalmeidaptg said:
Yes, a zip file would be good. It's the laziness best friend ahahah
Sent from my TF300T using Tapatalk 2
Click to expand...
Click to collapse
+1
Sent from my C6603 using xda premium
0.2
New version (with zip) uploaded.
Chris
Related
Announcing the Quattrimus kernel for the P930 and SU640
This is a drop-in replacement for the standard kernel in Android 4.2 based ROMs.
It will work with CM 10.1, AOKP 4.2, and any other custom ROMs.
Features
* Compiled with Linaro 4.6 2012.03
* Overclock to 1674MHz
* Entropy depletion patch
Instructions
* Download the zip file to your sdcard
* Boot into recovery
* Flash the zip file
* Reboot
Download
P930: kernel-p930-1.1.zip md5=0a39d52b638781c5a129d845a4f81e8e
SU640: kernel-su640-1.1.zip md5=2fcb674df86ac71d48c62495f4cbffc9
Source
https://github.com/thebigq/lge-kernel-iproj
Changelog
Version 1.0
* Initial release
Version 1.1
* Compile with Linaro 4.6 to fix instability.
@devs: This kernel package only updates the kernel binary and modules using the same technique as AnyKernel. This is all done with the included updatebootimg binary, which is a modified version of the standard mkbootimg.
Usage should be obvious if you look at the edify script. It can update only the kernel, only the ramdisk, or both (but if you're doing both, you can just write a new boot.img directly and be done with it).
Feel free to extract the package and use the tools to cook your own kernels.
Sweet. Trying it now
tmdcode, can you build a kernel for lu6200 from vs920 cm source? We have cm 10.1 rom for lu6200 which ported from p930. But kernel from ported rom is not good enough for daily use.
@tdmcode
Do you get warnings when compiling with Linaro toolchain?
I dunno if these warnings affect the stability though compiled successfully.
P930 kernel works but SU640 kernel stucked at LG logo.
Moreover, where to get "kernel" file from compiled kernel? Is it zImage?
Thanks
lyfkevin said:
P930 kernel works but SU640 kernel stucked at LG logo.
Moreover, where to get "kernel" file from compiled kernel? Is it zImage?
Thanks
Click to expand...
Click to collapse
@lyfkevin, can you build a kernel from source for lu6200. there are many people using p930 ported rom for lu6200 but kernel is not good enought for daily use because of bad performance and battery lìe
I the O/C freq kicks in "automatically" or should I define it as max freq under performance ?
JobNick said:
I the O/C freq kicks in "automatically" or should I define it as max freq under performance ?
Click to expand...
Click to collapse
You have to set it as the max freq
Sent from my LG-P930 using xda app-developers app
@lyfkevin:
Linaro warnings like this are normal:
unwinding may not work because EXIDX input section ... is not in EXIDX output section
The compiled kernel is arch/arm/boot/zImage. this is frequently renamed to "kernel".
The kernel I posted yesterday reboots when GPS turns on for P930 and VS920. Apparently it doesn't even boot on SU640. So I will be making a new one today.
For me it reboots when connected to BT headphones and making a call ...
Version 1.1 is up. Should fix instability issues.
tdmcode said:
Version 1.1 is up. Should fix instability issues.
Click to expand...
Click to collapse
I'm on CM10.1 M2 and kernel v1 can i just flash v1.1 over it or go back to "pure" CM10.1 M2 (from backup) and then flash ?
JobNick said:
I'm on CM10.1 M2 and kernel v1 can i just flash v1.1 over it or go back to "pure" CM10.1 M2 (from backup) and then flash ?
Click to expand...
Click to collapse
Just flash right over the old one. No restore or wipe necessary.
tdmcode said:
Just flash right over the old one. No restore or wipe necessary.
Click to expand...
Click to collapse
Okay, thanks for fast reply.
1) I've tested GPS functionality with Waze app. and my phone did not crash...(v1 kernel) GPS turned on and locked on satellites.
2) Which governor/scheduler/min max freq. do you use ?
JobNick said:
Okay, thanks for fast reply.
1) I've tested GPS functionality with Waze app. and my phone did not crash...(v1 kernel) GPS turned on and locked on satellites.
2) Which governor/scheduler/min max freq. do you use ?
Click to expand...
Click to collapse
Despite what you might think, I'm not really a governor/scheduler connoisseur. I just run the defaults. I do run at max freq though.
tdmcode said:
Despite what you might think, I'm not really a governor/scheduler connoisseur. I just run the defaults. I do run at max freq though.
Click to expand...
Click to collapse
Well to tell the truth, I don't really believe in all of this scheduling/governor algorithms.
I just was curious, that's why I asked.
---------- Post added at 11:41 PM ---------- Previous post was at 11:24 PM ----------
tdmcode said:
I do run at max freq though.
Click to expand...
Click to collapse
192/1674 MHz correct ?
JobNick said:
192/1674 MHz correct ?
Click to expand...
Click to collapse
Yes sir.
With a fully charged battery and after idling for 8 hours battery dropped to 90%.
GPS works and locks.
Bluetooth having issues like all other 4.2 based roms.
@tdmcode my device (P936) go in boot loop after install your kernel, what could be the reason?
I test it with CM10.1 & official AOKP
FYI: wind kernel is working fine after remove the under voltage setting
This is an AOSP kernel (Jellybean only). Use this thread to report bugs, etc.
NOTE: Make sure you're on the latest AOSP nightly ROM if you're flashing leanKernel later than v5.4.2.
DOWNLOAD
JB4.3/KITKAT builds: [ stable/exp ] changelog
latest stable JB 4.1 kernel: flashable zip (40a84a71f67f794a0c88d80531a2e664)
FEATURES
Unnecessary components removed for lean and fast kernel.
A bunch of code tweaks to help stabilize the kernel.
Latest Linux updates applied.
Some commits from latest CM10 kernel cherry-picked and merged. Starting v2.0, cm-10.1 source is used as base.
Ramdisk optimizations.
OC'ed to 1.8-1.9Ghz (limited to 1.51Ghz at boot, use an app to change max freq)
Tuned Deadline I/O scheduler. ROW Scheduler default.
Fast Charge (toggle via the "ffc" script - open terminal, type ffc then enter, plug in phone via USB)
InteractiveX V3 - optimized for S3, screen_off_maxfreq sysfs interface (default set to 810Mhz).
wakelock tweaks for better power efficiency.
Modified thermal control - fully support OC beyond 1.5ghz
Custom voltage control via sysfs (recommend using setcpu, voltage control, or system tuner)
lkflash script to flash latest kernel versions
lkconfig script to configure leanKernel specific features
Two more sleep states: Retention and Standalone Power Collapse
Faux Sound support
CM 10.1 color temp control
3D GPU 480Mhz slot
leanKernel scripts
lkflash (flash latest leanKernel versions from your phone)
Code:
[email protected]:/ # lkflash
leanKernel flasher
------------------
1) latest stable (recommended)
2) latest experimental
3) check/display versions
FLASH AT YOUR OWN RISK. I'm not responsible for my mistakes or yours. ;)
Please enter a number between 1 and 3 (or press enter to exit): 3
Please wait...
>>> Current version: 1.0, Latest stable: 1.0, Exp: 1.0exp1
lkconfig (configure leankernel specific settings which will persist between reboots)
Code:
[email protected]:/ # lkconfig
leanKernel configurator
---
1) interactiveX: set screen-off max freq to 1.1Ghz.
2) interactiveX: set screen-off max freq to 810Mhz (leanKernel default).
3) Stop thermald (for running benchmarks).
4) Restart mpdecision (when cpu1 gets stuck).
5) Overlock 3D GPU to 480Mhz.
6) Reset 3D GPU to 400Mhz (leanKernel default)
7) Set display color temp to cold.
8) Set display color temp to normal.
9) Set display color temp to warm.
Please enter a number between 1 and 9 (or press enter to exit):
ffc (force fast charge toggler)
Code:
[email protected]:/ # ffc
Fast USB Charge: ON
[email protected]:/ # ffc
Fast USB Charge: OFF
CHANGELOG (stable)
SOURCE
https://github.com/i...eanKernel-d2vzw
XDA:DevDB Information
Leankernel: Minimalistic Kernel, Kernel for the AT&T Samsung Galaxy S III
Contributors
Imoseyon
Source Code: https://github.com/imoseyon/leanKernel-d2vzw
Kernel Special Features:
Version Information
Status: Stable
Created 2013-07-31
Last Updated 2015-02-19
I think it was about time for me to start a thread on XDA.
First...
Oh man. 2 nd. Huh
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
edit
Wait, did i post my thread in the wrong sub-forum? LOL
edit
Any mods around that can move this to the proper sub-forum? I meant to post it in the ATT section - FAIL! I guess i can just start another one too but i'll wait a bit.
Imoseyon said:
Any mods around that can move this to the proper sub-forum? I meant to post it in the ATT section - FAIL! I guess i can just start another one too but i'll wait a bit.
Click to expand...
Click to collapse
Done
Glad to see your official thread here.
Sent from my SGS III
Does this have faux sound support and/or morfic colors?
I don't know if it's just me but the kernel links don't work. Is this a 3.4 kernel? Thank you for an official lean kernel thread!
Sent from my SGH-I747 using Tapatalk 2
abteer said:
I don't know if it's just me but the kernel links don't work. Is this a 3.4 kernel? Thank you for an official lean kernel thread!
Sent from my SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
I just downloaded it. Works good. It is a 3.4 kernel. Take a look at the change log.
rmead01 said:
Does this have faux sound support and/or morfic colors?
Click to expand...
Click to collapse
Experimental build supports faux sound.
Sent from my SGS III
Would also love to see morfic colors, I miss this kernel. I know its 'lean' hence keeping extra features to a minimum but I think there's a big chunk of people out there that are too used to the blue tint
Great to see you here Imo. Your work is awesome. Gonna give it spin.
Using tasks AOKP build 4.5.13 and lean kernel newest (stable?) Build.. Breaks all sounds. Anyone run into this problem?
Sent from my SGH-I747 using xda premium
Not for me. Did you wipe dalvik and cache. And fix permissions? If so. Try a redownload reflash maybe.
Sent from my SGH-I747 using xda app-developers app
andyx1985 said:
Not for me. Did you wipe dalvik and cache. And fix permissions? If so. Try a redownload reflash maybe.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yup, actually just loaded up experimental build and all is perfect. Nice and smooth sound works and best of all so far no app force closes like I've had with other 3.4 kernels. It was probably just a bad flash but since this is working nicely I'll leave the experimental build.
Sent from my SGH-I747 using xda premium
z34370z said:
Yup, actually just loaded up experimental build and all is perfect. Nice and smooth sound works and best of all so far no app force closes like I've had with other 3.4 kernels. It was probably just a bad flash but since this is working nicely I'll leave the experimental build.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
The app forces closes weren't kernel related. Just in case you wanted to know. They were related to this right here.
task650 said:
The app forces closes weren't kernel related. Just in case you wanted to know. They were related to this right here.
Click to expand...
Click to collapse
Cool, has this been merged into your 4-5 build already? If so then it wasn't fixed. At least not on my device because with under wear kernel I experienced the forced closes left and right. With lean kernel I have yet to experience a single force close.
Sent from my SGH-I747 using xda premium
This Kernel is based off the sources of AndreiLux Perseus Kernel (alpha35).
If you consider to thank me, please also consider to thank him http://forum.xda-developers.com/showthread.php?t=1927852
This kernel only supports roms of android version 4.3.x (sammy and aosp) and 4.4.x!
You can dualboot any of those roms
if you were using this kernel on aosp based roms, and want to use another kernel, you need to reflash the rom, of course without any wipe, it's just to restore modified files
Features (changes compared to Perseus):
- merges samsung open source update12
- dual sound engine
- compiled with linaro gcc 4.8.3
- updated Linux Kernel base to 3.0.101
- updated block subsystem (i/o schedulers) to linux 3.4
- updated memory management subsystem to linux 3.4
- partial updated kernel main system to linux 3.4 (current work in progress)
- zram, zsmalloc and lowmemorykiller updated from 3.9
- DevilQ cpu governor (default)
- fiops v2 i/o scheduler
- working for Aosp and Sammy at once (Big thx to Gokhanmoral for making this possible)
- Portet Ezekeel's Touchwake Feature (from nexus s)
- Oc up to 2.0 Ghz
- Backport from Linux 3.5 smp driver parts
- Wifi driver updated from note3
- backported zswap from linux 3.13 (this replaces zram now)
- backported cpu-boost driver
- possibility to set high/low power mode for wifi when screen is off
- LulzactiveQ cpu governor (from siyahkernel, thx again to Gokhanmoral)
- Hotplug Cpu Governor
- Proportional Rate Reduction for TCP
http://kernelnewbies.org/Linux_3.2#head-1c3e71416a9fdc2f59c1c251a97963f165302b6e
- improve memcopy/memmove
- Using Voodoo Sound and Boeffla Sound
- LED Control by yank555-lu
- ExFat support (thx to samsung for opensourcing the driver)
if your rom is based off PAC, Bam, Fusion, ... :
IMPORTANT: As per notice of 01.11.2013, my CM10.2 kernels do NOT support proprietary Custom Rom frameworks anymore. So if your Custom Rom did not implement the generic framework class framework-2.jar but his own naming convention, you will receive a boot loop. Do not cry about this here but advise your Custom rom cooker to fix this. I will not change this ever again.
The most prominent custom kernels for CM will follow the same approach (aligned between Yank555, Googy, LordBoeffla, Psndna, Temasek and me).
So please do pass this message along to your favorite ROM devs.
If they don't fix their rom, it won't be compatible with custom kernels any more!
Kernel app http://forum.xda-developers.com/showthread.php?p=41346443#post41346443
How to post bugs:
http://forum.xda-developers.com/showthread.php?t=1520508
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Dualboot Faq:
For more detailed instructions, please take a look at this thread from RichMd (thank you for it):
Dualboot Faq thread
Important: if you want to use this kernel for dualboot, i highly recommend flashing my recovery as well.
General information about the recovery:
dualboot menu.
in this menu you can:
* create the secondary system partition (needed to be run once, if you want to install a second rom)
Install-zip menu:
you'll notice there is a new menu, where to select what you want to flash.
if you select kernel, rom or recovery, the zip gets installed as it is.
if you select zipt to pri./sec. filesystem, it is selfexplanary
if you select rom to secondary fs, the zip gets modified to install to the sec. fs. IF YOU WANT TO INSTALL IT TO PRIMARY FS LATER SOME TIME, YOU NEED TO REDOWNLOAD THE FILE!
if you select rom to primary filesystem, it gets installed there, and you can use the same zip later again.
How to install a second rom:
make sure you have already created ssecondary system partition! if not, go to dualboot menu and create it now (this may take some minutes)
The savest way is the way by using nandroids: if you don't have a nandroid already, create one now. Then just select your backup, and restore it to secondary filesystem.
you now should already be able to boot into primary or secondary rom (which are both the same now).
now you can install any other rom as primary.
if you want to install a new rom directly as secondary,
make sure there are no spaces in the filename!,
then just go to install zip. you'll notice there's a new menu at some point.
in this menu you can select where you want to install, and what type of file it is.
if you choose rom to sec. fs, your zip files itself gets modified to be installed to secondary fs. this may take a minute, because the files needs to get zipped again. Imporant: this file is permanently modified. if you think you need it later again, you should redownload it, because the modified one would always install as secondary.
installing a rom as primary, a zip to primary or zip to secondary fs, does not modify the zip.
Additional information:
roms coming with an aroma installer are hard to handle, as every dev can place own commands into it. It's impossible for me, to take care of every possibility. Because of this, it should be the best method, to flash a rom with aroma installer as primary one (and then move it to secondary, by using the nandroid method, if you want it to be secondary).
Click to expand...
Click to collapse
Many Thanks to:
- RichMD
- Gokhanmoral
- Andreilux
- DAGr8
- simone201
- ptmr3
- Stratosk
- RolloS
- kasper_h
- Philz (for his recovery source, although i had to implement my own touch )
- all the others mentioned in the changelogs
reserved
could someone please upload sammy 4.3 stock kernel? i want to build a seperate kernel for sprint, but i need the stock kernel for extracting some files before. thanks
My links to current devil stuff
New devil recovery with f2fs support for system and cache (data partition to come later). Note you dont need f2fs to use the recovery or kernel but you do need the kernel and recovery to use f2fs. If you convert to f2fs and want to use a different recovery then you must format file systems back to ext4 before changing. Bad things will happen if you do not convert before changing recoveries. Also the rom you are flashing must have an installer script setup for f2fs. I will be updating all my roms to support f2fs when I do their next releases.
Recovery link
https://www.androidfilehost.com/?fid=23622183712470601
MD5sum 1f15bb6c56d1fc65b00c8af188a37cda
Devil tools 1.1.2
https://www.androidfilehost.com/?fid=23622183712470603
MD5sum bcb3e3b4d7ec969b43bd68e47e6b556f
May post a current kernel if approved.
Thank you thank you thank you! Been hoping someone would make us a custom mk4 kernal
Thanks DerTeufel980.... we all really appreciate this.
So I can use this with a Samsung mk4 ROM? I'm on digiblur.
Sent from my SPH-L900 using xda app-developers app
krobinso2295 said:
So I can use this with a Samsung mk4 ROM? I'm on digiblur.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Once it is done.
Sent from my SPH-L900 using XDA Premium 4 mobile app
kernel is up
dualboot coming in the next days. i need to compile my recovery for you...
Sweet!!
Sent from my SPH-L900 using XDA Premium 4 mobile app
So the kernel posted will work on twiz 4.3?
From My Classic 4.3 n2/3
Chaz187 said:
So the kernel posted will work on twiz 4.3?
From My Classic 4.3 n2/3
Click to expand...
Click to collapse
It's in the first post... Working on Android 4.3 and above...
Gesendet von meinem Note II mit Tapatalk 2
DerTeufel1980 said:
It's in the first post... Working on Android 4.3 and above...
Gesendet von meinem Note II mit Tapatalk 2
Click to expand...
Click to collapse
Just flashed and it wont boot past splash screen. Button backlights flash on but that is all. What extra info do ypu need?
Sent from my SPH-L900 using XDA Premium 4 mobile app
Will this work on cm 4.3 4.4 or have to wait for the dual boot
Sent from my SPH-L900 using Tapatalk
It should but it is untested. Dual boot is just a special recovery that allows you to run two roms without flashing or nanding between the two.
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Just flashed and it wont boot past splash screen. Button backlights flash on but that is all. What extra info do ypu need?
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Does the screen turn black after splash? Or does it sit with my kernel logo all the time?
Is adb shell working?
sliverr7x said:
Will this work on cm 4.3 4.4 or have to wait for the dual boot
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
It should work already... But as written above, it does not work on sammy currently.
Please report if there are same issues with cm.
Gesendet von meinem Note II mit Tapatalk 2
OK I just read about pac roms so I see It won't work according to the op
Sent from my SPH-L900 using Tapatalk
Can't wait for this to be working.... will it support stweaks
From My Classic 4.3 n2/3
Chaz187 said:
Can't wait for this to be working.... will it support stweaks
From My Classic 4.3 n2/3
Click to expand...
Click to collapse
The older version stweaks workes sort of but there is a devil tools in the market that works.
DerTeufel1980 said:
Does the screen turn black after splash? Or does it sit with my kernel logo all the time?
Is adb shell working?
It should work already... But as written above, it does not work on sammy currently.
Please report if there are same issues with cm.
Gesendet von meinem Note II mit Tapatalk 2
Click to expand...
Click to collapse
Sits on devil logo. Not sure about adb not around pc. Anything specific just list it and will try later.
Sent from my SPH-L900 using XDA Premium 4 mobile app
I would need someone to try on cm11 or omnirom (generally any aosp rom), to know if the issue is caused by sammy initram files, or the main init file.
Gesendet von meinem Note II mit Tapatalk 2
F93 Kernel for CM11(Also might work on 4.3 roms)
These kernels are provided as-is without warranty. I'm not responsible for any problem you may encounter with your phone or if your cat suddenly dies.
About AK-F93 AOSP Kernel for GEEHRC
AK xGenesis Kernel ported to Geehrc with some additions for UNOFFICIAL AOSP based ROMs
Features:
http://forum.xda-developers.com/showpost.php?p=46249027&postcount=2
Click to expand...
Click to collapse
About experimental F93 AOSP Kernel[Abandoned]
F93 AOSP (MAKO) kernel for UNOFFICIAL ROMs based on Chadouming, houst0nn & other great guys work. This kernel based on Ronasimi GEEB kernel (https://github.com/ronasimi) with some additions from me.
Features:
- Working camera autofocus (no need to restart stupid mm-qcamera-daemon each time)
- KEXEC Hardboot enabled so Multirom is working (get it here)
- Radio-Iris enabled (FM Radio)
- Intelli-Thermal added (thx faux123)
- Intellidemand cpu governer updated (thx faux123)
- FastCharge reimlpemented (thx faux123)
- Sweep2Wake & DoubleTouch2Wake (thx showp1984)
- GPU voltage control (thx Tk-Glitch)
- Dynamic management of dirty page writebacks (thx Christopher83)
For GPU voltage control & Dynamic management of dirty page writebacks see the 99kerneltweak file in /system/etc/init.d/ folder
Volume Keys trick:
Inverted volume keys on some devices can be fixed this way:
echo 1 > /sys/devices/virtual/misc/vol_keys/vk_invert
or
echo 0 > /sys/devices/virtual/misc/vol_keys/vk_invert
to revert it back
You can insert this string into /etc/init.d/99kerneltweaks and it will be applied each time device boots.
Use RootBrowser to find the /etc/init.d/99kerneltweaks file and edit it using RB Editor.
Add in the line echo 1 > /sys/devices/virtual/misc/vol_keys/vk_invert and save.
Click to expand...
Click to collapse
About F93 Gproj Kernel
LGE Gproj kernel for OFFICIAL CM11 & CM based ROMs with additional features ported from misc nexus 4 custom kernels*.
The main purpose of f93 kernel is balance between battery life & performance so there is almost no overclocking features in this kernel.
Features:
- Kernel build with linaro 4.7 toolchain and neon vfp/krait/a15 and -O3 optimization flags
- BLX (experimental)
- S2W/S2S/DT2W
- FSYNC Control
- Accuracy Filter Control
- Gamma control (faux)
- USB FastCharge
- Sound Control (faux)
- ZRAM support (separate kernel module)
- GPU Simple Governor (faux)
- Intelli Plug (faux cpu hotplug driver)
- Intelli Thermal (faux thermal driver)
- IO schedulers - ROW, FIOPS, SIO
- CPU governers - Lazy, Smartmax, Asswax, Wheatley, Intellidemand, Ondemand+
- Userspace Voltage Control (faux123)
- Low CPU clocks - 162, 270, 378Mhz
- Additional TCP congestions (separate kernel modules)
Click to expand...
Click to collapse
Use Trickster MOD or FauxClock apps to control these features.
For kernel modules control use my app KoControl
HOW TO INSTALL
1.Download kernel and place it to sdcard somewhere
2.Reboot to TWRP, or CWM
3.Flash the kernel
4.Reboot
Click to expand...
Click to collapse
Changelog:
F93 AOSP version 0.5 (12/02/14)
* Kernel updated to 3.4.79
* Add sysfs interface for controlling pmic8xx volume keys (makes it possible to invert UP & DOWN vol keys mapping dynamically)
* ElementalX & Seladang CPU governors added
F93 AOSP version 0.4c (07/02/14)
* See git.. (runqueue stats fixes, msm bus updated, etc)
F93 AOSP version 0.4a
* CPUQuiet hotplug updated
F93 AOSP version 0.4 (21/1/2014)
* Sweep2Wake & DoubleTouch2Wake (thx showp1984)
* GPU voltage control (thx Tk-Glitch)
* Dynamic management of dirty page writebacks (thx Christopher83)
Experimental version 2.2 (6/1/2014)
* NVIDIA's Dynamic CPU core management driver
F93 Gproj Kernel
Version 2.2 - 31/01/14:
* CM Git synced
Version 2.2:
* Prima WiFi driver updated to 3.2.2.20
* CPU's min_uV reduced to 600
* useless cpu governers removed
Version 2.2:
* Prima WiFi driver updated to 3.2.2.20
* CPU's min_uV reduced to 600
* useless cpu governers removed
Version 2.1:
* f93 kernel BLX experimental support added. Version number corrected. Might work on 4.3 roms.
Click to expand...
Click to collapse
Downloads
Franco Kernel with some mods
AK xGenesis 09/06/14
F93 AOSP CPUQ v0.5.zip
F93 AOSP MPD v0.5.zip
F93 Gproj MPD v2.2 31/01/14
F93 Gproj CPUQ v2.2 31/01/14
Previous kernel releases...
ROMs that will work with AOSP based kernels:
cm-11-TEMASEK-20140705-UNOFFICIAL-geehrc.zip
ROMs for Gproj kernel:
Official CyanogenMOD 11 E975 Nightlies
BT MAC Address fix (you only need this if your BT mac begins with 41:4E..."
BT MAC Fix
Multirom v22 for E975
MultiROM is one-of-a-kind multi-boot mod made by @Tasssadar for Nexus 7 and ported to e975.
It can boot almost any Android ROM. The main part of MultiROM is a boot manager, which appears every time your device starts and lets you choose ROM to boot.
ROMs are installed and managed via modified TWRP recovery.
To work properly your primary ROM's kernel must be kexec-hardboot enabled! F93 AOSP kernel has this feature enabled. It will not work on GPROJ kernel based ROMs as primary, sorry..
Features:
* Multiboot any number of Android ROMs
* Restore nandroid backup as secondary ROM
Click to expand...
Click to collapse
Installation
MultiROM has 2 parts you need to install:
MultiROM multirom-20140409-v22-UNOFFICIAL-geehrc.zip
Modified TWRP recovery TWRP-2.7.0_MR_geehrc.zip or fastboot flashable img TWRP-2.7.0_MR_geehrc.img
You current rom will not be erased by the installation.
1.Flash the modified recovery (zip thru CWM or img thru fastboot)
2.Flash the MultiROM zip
3.Enjoy!
Click to expand...
Click to collapse
Adding ROMs
1.Android
Go to recovery, select Advanced -> MultiROM -> Add ROM. Select the ROM's zip file and confirm. As for the space, clean installation of stock 4.2 after first boot (with dalvik cache generated and connected to google account) takes 676mb of space.
Click to expand...
Click to collapse
For further instructions see original Oblikas post http://forum.xda-developers.com/showthread.php?t=2403992
Regards and praises to @Tasssadar and @oblikas for theirs hard work!
Github:
https://github.com/anarkia1976
https://github.com/faust93
https://github.com/Tasssadar
https://github.com/oblikas
Gj! Try to flash it from the twrp from omni and it gives me an error. Maybe i need to flash a new recovery?
Enviado desde mi Optimus G mediante Tapatalk
Same here, same error as with the other cm11 build from Kite Kernel thread.
Gesendet von meinem Nexus 7 mit Tapatalk 4
thomsch said:
Gj! Try to flash it from the twrp from omni and it gives me an error. Maybe i need to flash a new recovery?
Enviado desde mi Optimus G mediante Tapatalk
Click to expand...
Click to collapse
Yep. I'm using TWRP 2.6.3 recovery, it's working ok
http://xep.8800.org/e957/multirom/twrp263_multirom.img
Philz touch recovery will wrk..
Listing kernel feature would be bettr...!!
Sent from my LG-E975 powering Stock 4.1.2
Is the status bar transparent?
Sent from my LG-E975 using XDA Premium 4 mobile app
i get status 7 from cwn touch 6.0.3.0 (freegee)
skate4life said:
i get status 7 from cwn touch 6.0.3.0 (freegee)
Click to expand...
Click to collapse
http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.4.5-e975.img
Sent from my LG-E975 using XDA Premium 4 mobile app
It's better than omni? ? Any ideal? Becoz i am using omni version, some errors but thát's fine. Tks in advance
Sent from my Optimus G using Tapatalk
Is this ROM N4 sources modded to our OG?
Sent from my LG Optimus G using Tapatalk
---------- Post added at 05:00 PM ---------- Previous post was at 04:52 PM ----------
shinms said:
Is the status bar transparent?
Sent from my LG-E975 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
+1 status bar lockscreen
Sent from my LG Optimus G using Tapatalk
Can you please upload the ROM itself to somewhere else other than goo.im? I'm having issues downloading it.
Thanks
Zunex95 said:
Can you please upload the ROM itself to somewhere else other than goo.im? I'm having issues downloading it.
Thanks
Click to expand...
Click to collapse
https://disk.yandex.ru/public/?hash=eZsxHGS+EQbfEgq7LKPtTyjVOxlv43irur/TT5kEpnE=&locale=en
Can the v27 kernel be flash on 4.3 ROM? I like ur kernel but haven't seen any update recently...
I see many downloads but no feedback... How's the rom everyone?? Is good?
Sent from my LG Optimus G using Tapatalk
I would like to try it, goo.im is in maintenance and the other one is too slow..
15/11: Toggles options crash. Only get this error.
Im waiting for 16/11 version. Are you uploading? Because not see the link in OP.
Thanks for this great gob.
kjjjnob said:
15/11: Toggles options crash. Only get this error.
Im waiting for 16/11 version. Are you uploading? Because not see the link in OP.
Thanks for this great gob.
Click to expand...
Click to collapse
which options? i've released a patch today, it fixes mobile data and tethering tiles crash.
faust93 said:
which options? i've released a patch today, it fixes mobile data and tethering tiles crash.
Click to expand...
Click to collapse
Quick toggles. The version online is fixed? Sorry is confused because say 15-11. I will try the last build. Sorry form my BAD nglish xD
davevinci said:
I see many downloads but no feedback... How's the rom everyone?? Is good?
Click to expand...
Click to collapse
After I had finally managed to flash the ROM with the linked multi ROM recovery (by the way: does the included kernel support multirom, would be awesome?) I wanted to give some feedback.
This ROM is the most complete android 4.4 ROM for e975. It can be considered as a daily driver.
The autofocus is working, performance is good, battery is good and there are no big bugs.
The bugs I have noted:
- stock cam only uses 8mp, other cams have 13
-can't connect via Bluetooth to my car
- gaming performance not as good as on omni/cm10.2 (epic citadel says 45fps compared to 55fps)
Gesendet von meinem LG-E975 mit Tapatalk
madphone said:
The bugs I have noted:
- gaming performance not as good as on omni/cm10.2 (epic citadel says 45fps compared to 55fps)
Click to expand...
Click to collapse
did it applicable to stock or F93 kernel?
F93 is downclocked kernel aimed for battery saving so it is possibe some performance loss..
Hey Everyone,
I'm by no means a pro at kernel building but I've put lots of effort into these kernels so I thought I'd share them with you. The Uber kernel will always be updated to the latest Kernel version and will be overclocked to 1890 MHz or 1998 GHz (2 GHz) you decide which option you are willing to do. Unlike some of the other T-mobile Galaxy S II Hercules developers out there, I actually have a Galaxy S II and plan on having it until Summer 2014. This means that EVERY KERNEL I POST HAS BEEN TESTED AND IS WORKING although it might not be perfect (few things in life ever are).
Even though I don't post anything unless it works I still don't want to be liable for user errors. In other words, if you flash one of these Kernels your warranty is void and I AM NOT RESPONSIBLE for any data loss or bricked devices etc. A Clean install is ALWAYS recommended. That does not necessarily mean you can't install these kernels on you current build it just means that you might have problems if you do. Recently apps have been getting corrupted for whatever reason whether on Stock or AOSP and in most cases they cause RRs and SODs. If you find yourself in one of those situations a clean install is the easiest fix. If you want to try and save you apps then connect to you phone while in recovery using adb. Then type adb shell. Now once you are in that shell you can run this command to fix your apps "e2fsck -yfDC0 /dev/block/mmcblk0p25" it could take anywhere from a few minutes to an hour depending on the state of your apps.
[AOSP 4.4.x UBER KERNEL LINK]
UBER 4.1 - 1.89 GHz RELEASE for AOSP 4.4 KitKat
UBER 4.1 - 2 GHz RELEASE for AOSP 4.4 KitKat
All old Kernels can be found on Dev Host via this link (be careful you read file names and descriptions carefully if you choose to take a peek around) http://d-h.st/users/Cl3Kener/
Installation Instructions
**** IMPORTANT!!! USE TWRP 2.6.1.0+ for 4.4 kernels!!! Failure to do so may result in bootloops due to changes made to TWRP to accommodate SELinux in 4.4 ROMs (Links include flashable TWRP installation zips credits to meekrawb. Just flash them in your current recovery! ) ****
1. For best results a install these kernel after a fresh ROM install (although it still should work if you don't do that)
2. Reboot into recovery (MAKE SURE YOU USE THE RIGHT ONE!!! (See red print above))
3. Flash Kernel Zip
4. Reboot and let Settle for ~10 minutes
5. Install Trickster MOD from the App Store for access to all of the options.
6. Change the settings to something other than INTERACTIVE (Especially if you run it with BFQ it will give you the worst screen lag ever). Then enable "Set at Boot" and push the check mark button at the top right hand portion of the screen or else you will lose your configurations.
7. Enjoy!!!
Error Reporting
I am always open to hearing about your errors although just telling me something went wrong without giving me details does me absolutely no good. So here are my expectations if you do want to complain about something not working:
1. Please list the ROM you are using,
2. The IO scheduler you were using
3. The CPU governor you were using
4. The CPU frequency range (192/1080 etc)
5. What you have done to attempt to fix it.
6. If you were able to simulate it again using the same settings.
7. Anything else you think is applicable to the issue
I would also hope that you would consider trying some of the following things to fix your issue before you ever report it because most of these things will fix the problem without me even having to change a thing.
1) Fix file permissions using a program that does a thorough job. I recommend using the fix file permissions in ROM manager because it is the best I’ve seen. For the record, I don’t actually use ROM manager for anything other than fixing permissions. Please consider trying this first because it tends to fix most of the FC/RR/SOD errors you might have.
2) Make a backup and install a clean version of the ROM you are running and see if you are still experiencing those same errors. You may have corrupted files if you’ve been dirty flashing.
3) If that doesn’t solve it, redownload and reflash, maybe something got corrupted but it still managed to flash. This happens sometimes and I can cause you grief.
4) For advanced users pull a logcat. I know not everyone knows how to do this but you can learn if you check out this OP or other ones like it
SPECIAL THANKS TO:
Android88 - because he is awesome and encouraged me to create this thread!
Samsung - for the source code to build these Kernel (and for making the phone)
Ayysir - for his wonderful tutorial on making a bash script to build kernels and for helping me out all of the time with everything!
Elbermu - For Bringing Thermal and Sweep2Wake to Hercules and for the help!
Bmg002 - For his extensive work fixing/rewriting my init.d scripts
Gruntparty - For completely redoing/fixing the build.prop injector I use for my AOSP Kernels
I Am The Frost - For being my first and best tester on xda. He's debugged several issues in these kernels for me
UBER Kernel Repositories can be found at https://github.com/Cl3Kener/HERC-KERNELS and are properly labeled for your convenience (see the branches)
Informational Links
Here is a fantastic guide on "Innards" of Kernels
Optimizing Linaro Keychains
Building a Bash Script to make Kernels
JOIN MY GOOGLE COMMUNITY IF YOU WANT INSTANT UPDATES ON ANY OF ANDROID STUFF I DO.
Reserved!
XDA:DevDB Information
[KERNEL][AOSP 4.4.x][2GHz/1.89 GHz] UBER 4.1 | LINARO 4.7.4, a Kernel for the T-Mobile Samsung Galaxy S II
Contributors
Cl3Kener
Kernel Special Features:
Version Information
Status: Beta
Created 2013-12-02
Last Updated 2014-01-30
Changelogs
Changelogs
Changelog UBER 4.1 Release
- ONLY FOR ANDROID 4.4.2 CM 12/16 Nightlies and beyond!!!!
- Kernel Version 3.0.101 - Linaro 4.7.4 2013.12
- USB fastcharge
- MORE TCP Options "Veno as default
- Fsync toggle - disable for better performance but beware that if your phone crashes you will lose data.
- Overclocked CPU 1890 or 2GHz/ GPU 3D = 320 2D = 266
- IO Schedulers - cfq, bfq, row, noop, deadline, sio, vr, FIFO, and zen
- CPU Governors - intellidemand, interactivex, lazy, wheatley, smartass, badass, lionheart, minmax, fantasy, savagedzen, scary, HYPER and samsung.
- Frandom Lag Reducer
- Smaller sized kernel due to xz compression.
- CPU link - elbermu
- Sweep2wake - thanks dennis rassmann (@show-p1984) for his awesome code and elbermu for modifying it to fit this device!
- Thermal - thanks once again to dennis rassmann (@show-p1984) for his awesome code and elbermu for modifying it to fit this device!
- IO Booster
- CPU Power - Vincent Guittot
- Frontswap Support
- Google "Snappy" compression/decompression
- KGSL GPU Control - carvsdriver
Additional Info
Terminal commands to enable/change a kernel features if you are don't like kernel tuning apps
Fsync
To enable - echo 1 > /sys/module/sync/parameters/fsync_enabled
To disable - echo 0 > /sys/module/sync/parameters/fsync_enabled
USB Fast Charge
To enable - echo 1 > /sys/kernel/fast_charge/force_fast_charge
To disable - echo 0 > /sys/kernel/fast_charge/force_fast_charge
Set Thermal Values
Go to /sys/kernel/msm_thermal/conf/ in a root file browser and change the values
Set MPDecision Values
Go to /sys/kernel/msm_mpdecision/conf/ in root file browser and change the values
Disable CPU Link
echo 0 > /sys/kernel/cpu_gov_sync/force_cpu_gov_sync
Recommended CPU Govs by Category
For Performance
Performance Governor - Full OC
HYPER - full oc
Lionheart - full oc
For good battery life with decent performance use
Intellidemand
Interactivex
Ondemand
Samsung
Lazy
Moderately Conservative
Badass
Conservative
Wheatley (debatable could be in the above category)
Very Conservative
Powersave
SavageZen
not sufficient info? checkout out this op
Sweet! New kernel!
Sent from my SGH-M919 using Tapatalk
Sweet! Will try this out right now :good:
Flashed beautifully thanks @CI3kener
Sent from my SAMSUNG-SGH-T989 using Tapatalk
gotta love the uber, thank you kener
Sent from my SAMSUNG-SGH-T989
Thank You !
Will this work on alpha 3??
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
JNMM said:
Will this work on alpha 3??
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Yes ?
Sent from my SAMSUNG-SGH-T989 using Tapatalk
3 New Performance Boosters
Hey Everyone,
For those of you who haven't heard I've been using "Koding" as my new kernel build server. Space is very limited with my free account but if you'd like you can click here and signup to help me get more free space. You'll also find that you can learn how to code just about anything (java, html5, php, to name a few). Many developers and adding tutorials and sharing their projects so if you are interested in that stuff make sure to sign up!
I've made two nightlies this morning which need testing. For those of you who were around for my 4.3 you might recall that somewhere along the line there was suddenly a curious SD Card Mounting/Unmounting that would happen after unlocking the phone. I had made so many commits in such a short time frame that I was unsure which one caused the error. I've gone back and added my top three performance improving commits from the questionable series to see if any of these three commits caused the error (I certainly hope they did not, I really hope it was caused by the LZ4 compression and not the performance boosters). Let me know if you see any problems as you use these nightly kernels!!! Remember these are for 4.4 ONLY!!!
Here are the links!
UBER 1.89 GHz
UBER 2 GHz
Cheers!
Cl3Kener
just to let you know i have not been getting the sd card error on the 4.4 uber
Signed up on Koding maybe you can teach me a thing of two (^o^)
Sent from my SAMSUNG-SGH-T989 using Tapatalk
Confirmed working on almites cm build
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
BETA2 For 12/16 CM Nightlies and Beyond
Hey Everyone!
Well Team Chopsticks finally got video working although from what I can tell all of the work was actually all done by our very own @bryan2894 who went and found the patches that fixed the video!!! Great work @bryan2894!!! Part of this video fix included the kernel so here is an updated kernel with the patch needed. This kernel will only have fixed video on CM 12/16 nightlies and beyond. I bet it might work with earlier but you might as well update if you are a CM user so what's the point?
Anyhow, enjoy the updates!
Cheers!
Cl3Kener
PS since I know someone will ask, This actually does work great with the 12-14 HellKat build since it also has working video because we grabbed the patches from CM before they were merged.
Sent from my SAMSUNG-SGH-T989
Question: for official CM 11 update, i am currently using recovery CWM 6.0.3.7, because CM officialssaid so or phone will run into problems. but this kernel requires TWRP, i am wondering can i update CM 11 nighlies with the given TWRP recovery?
Please advise. Thanks.
syan8182 said:
Question: for official CM 11 update, i am currently using recovery CWM 6.0.3.7, because CM officialssaid so or phone will run into problems. but this kernel requires TWRP, i am wondering can i update CM 11 nighlies with the given TWRP recovery?
Please advise. Thanks.
Click to expand...
Click to collapse
That stuff is nonsense. The latest TWRP in fact is much better for this phone and flashing this or any other ROM here IMHO. I tested both CWM and TWRP on more than one occasion and results were identical. For me TWRP is also much easier to get into when you have an issue with a new ROM booting and you need to get into recovery via the power & volume up buttons.
syan8182 said:
Question: for official CM 11 update, i am currently using recovery CWM 6.0.3.7, because CM officialssaid so or phone will run into problems. but this kernel requires TWRP, i am wondering can i update CM 11 nighlies with the given TWRP recovery?
Please advise. Thanks.
Click to expand...
Click to collapse
I've flashed CM11 (my builds) about 10 times in the last month and have been using TWRP 2.6.1.0 since Sept. without issue.
Just don't try to flash TWRP from within GooManager, either flash from recovery or use Odin (best).
Since the video recording is working now I moved to CM11 using the @Almite (Rom) and @Cl3Kener (Uber 2GHz kernel) and I can tel you this is solid Rock combination in performance and stability even those are still in Nightlies/Beta so thank you all for this amazing team work...
Is it possible to add the BLN notification (I know some don't like it but usually this the feature can be disabled)
Thanks