Develop Bugs

Slidepad 704CET JB 4.2.2

CAUTION: USE THIS ROM AS YOUR OWN RISK.......Be sure you have the official rom in case it is not working for you. It appears that even though you have the same tablet Reference, depending on when you buy it, hardware might be a bit different and most likely you will take the risk of having a unusable Touch screen or wifi...
It works for me on my SP704CET bought in France. (I use LSMOD and here the loaded driver: mxc622x, rtl8150, mcs 7830, qf9700, asix, sun5i_csi, gc0308, camera, cedarx, mali, gsl1680, gt811, byd693x,ZET622X, ssd253x, ft5x_ts)
Hi all,
If anyone is interrested in J.B.4.2.2 for Memup SlidePad 704 CET (Only CET, I did not test on 704 CE.
I can post the rom image created... (I will post it later on tonight)
Leave me a private message if you need it.
Content of the ROM
- Rom basically design for Manta13
- Your device will have MID13 as name (No more CET704)
- Jelly Bean 4.2.2
- Fast rom (Menu and all are way faster than 4.1.1 original firmware)
- CWM mod recovery working out of the box
- Root device with Play store.
This ROM come as east country language first, you need to go to setting icon, the language (Icon with a White A letter) and the first option will be language, select yours.
to check you table model, look on the back of the table, even if on the back it says 704CE, you need to look at the white sticker that will say if it is a CE or CET.
As usual, to flash the image, go to boot loader and use livesuite 1.7.
Procedure on the SP704CET with livesuit:
- completly turn off the tablet, unplug cable
- start livesuite and select the downloaded image file
- keep the VOL- button pressed and plug the usb cable
- without releasing the VOL- button press the Power button 6 times.
- You should hear windows sound saying a USB device has been plugged
- if windows request it, install the driver from Livesuitefolder\usbdriver
- Livesuite should automatically start the flashing process.
- when prompted, "Format device" press YEs. (It might take a minute)
- When it s 100% you tablet should reboot.
Done.
External download link: https://mega.co.nz/#!F4NizYZI!Tei4mztIuhv_jccLQCYWvBo5rZNI-0057p3MxzvoFNc
Note: I did not invent anything, thanks to the good work of MANTA team members. I just found out this rom works, I just had to modify the touchscreen drivers and idc files.
Cheers

I managed to create an other rom:
link:
Linked removed, this rom is bogus. Use the 1st one, i will try to update it again when i get back
Same version as the previous one with:
- Change to build.prop to match the tablet name 704CET (previous rom was detected as MANTA MID13, from the originial rom)
- Modified boot animation
- added some JellyBam tweak and application (if needed you can installed them from the apk files located in /system/app)
- Add Jellybam static and dynamic wall paper
- other small modifications
Let me know if you like it.
Small hick, you will need to reinstall firefox, the version I add to the rom is not working after first boot
go to /system/app and install jellybam launcher etc...
I hope you will like it, this is only my second rom cooking
Cheers

Guys,
Can you let me know what do you think of this rom? any customization idea I might integrate in a newer version?
Also let me know if that works for you..
if someone has a 704CE and can test the rom.... I can make another verison for 704 CE if you letme know the driver you need (Use an original rom, install any terminal emulator and run lsmod and post the result, just the loaded module names.)
Thanks.

Memup 704cet
pierrottls31 said:
Guys,
Can you let me know what do you think of this rom? any customization idea I might integrate in a newer version?
Also let me know if that works for you..
if someone has a 704CE and can test the rom.... I can make another verison for 704 CE if you letme know the driver you need (Use an original rom, install any terminal emulator and run lsmod and post the result, just the loaded module names.)
Thanks.
Click to expand...
Click to collapse
CWM not working in the new model send from factort a week ago.
Installs , mas every time goes to cwm e never gets the menu.
Tkanks

cpe1 said:
CWM not working in the new model send from factort a week ago.
Installs , mas every time goes to cwm e never gets the menu.
Tkanks
Click to expand...
Click to collapse
Arf, did you do the "format mode" in live suit? If not try it, latest rom may have a different nand mapping.
Cheers

Memup 704cet
pierrottls31 said:
Arf, did you do the "format mode" in live suit? If not try it, latest rom may have a different nand mapping.
Cheers
Click to expand...
Click to collapse
Tkans for your rapid unser. I already did it (format with suit ) Here is the picture it says after going to cwm e never comes back to the manta menu.
Tks a lot for the help.
Note i just received this tablet 2 days ago from MemUp service/garanty

cpe1 said:
Tkans for your rapid unser. I already did it (format with suit ) Here is the picture it says after going to cwm e never comes back to the manta menu.
Tks a lot for the help.
Note i just received this tablet 2 days ago from MemUp service/garanty
Click to expand...
Click to collapse
2 thing comes to my mind. First, try to restore with the original firmware first, make sure it, works. Then try to reapply the rom ( use the first one i post, i found out the second one is bogus and my tablet is restarting by herself from time to time.
From the screen shot it looks like your tablet doesnot have same nand mapping as mine. Try the first rom and letmme know. Cheers

Memup 704cet
pierrottls31 said:
2 thing comes to my mind. First, try to restore with the original firmware first, make sure it, works. Then try to reapply the rom ( use the first one i post, i found out the second one is bogus and my tablet is restarting by herself from time to time.
From the screen shot it looks like your tablet doesnot have same nand mapping as mine. Try the first rom and letmme know. Cheers
Click to expand...
Click to collapse
Thanks again.
No results not working.
I find this 4.2.2 A13_86VS_M758C1_1305007_20130503 from MANTA that works perfect.
The only thing is donot have CWM.

Link not working
Hi,
The link to download rom isnt working

Fernando Lemos said:
Hi,
The link to download rom isnt working
Click to expand...
Click to collapse
Hi The link has expired.
The new link is here...;
http://ovh.to/ZLaz9e
Will be available for 30 days.
Enjoy.

Question about instalation
Hi again!
I already have CWM installed and rooted the tablet, do i have to do anything before install this rom or is just install over the current rom?
Thanks for the link btw!

Fernando Lemos said:
Hi again!
I already have CWM installed and rooted the tablet, do i have to do anything before install this rom or is just install over the current rom?
Thanks for the link btw!
Click to expand...
Click to collapse
You can read the first post of this thread, basically no problem, you can do it whenever as you have to switch to Bootloader mode.
It will replace your current rom and delete everything you have on the tablet.
Good luck

Can you repost the link please ? Thank you.

imtheyoyo said:
Can you repost the link please ? Thank you.
Click to expand...
Click to collapse
Hi,
Here is the new link: (Sorry for the delay but my provider only share for a max of 30 days... )
http://ovh.to/5guuwGa
Have fun

Thanks !!!!
If you want I can upload it on MEGA and share the link here.

imtheyoyo said:
Thanks !!!!
If you want I can upload it on MEGA and share the link here.
Click to expand...
Click to collapse
Yes please, I do not have access to mega from work, and my home connection is crap...
Very appreciated. Thanks a lot
Cheers

Okay. I do it and when upload finished I post the link here.
merciii

There is the permanent link : 704CET_JB4.2.2_V1.img (560.5 Mo)
Thanks again for your work pierrottls31.

imtheyoyo said:
There is the permanent link : 704CET_JB4.2.2_V1.img (560.5 Mo)
Thanks again for your work pierrottls31.
Click to expand...
Click to collapse
Thanks again for posting the link.
have fun.
salut

you can use the Faaast JB custom rom with the correct driver
Hi, I cannot test this rom on 704CE as I do not have this tablet anymore. Also, this rom is for 704 CET so it will not work on CE. This is a driver issue... so the rom should install fine but you might have no TOuchscreen or no Wifi.....
If you know about replacing a driver in Android, you might want to try it (make sure you have the original rom just in case)
I manage to do this driver thing on my 704 CET tablet and it works well. you can help yourself with this thread:
http://forum.xda-developers.com/showthread.php?p=42274265
you can even use this rom (Fast jelly bean custom rom) and download the needed driver... (For your information, I have tested this fast JB rom on my 704 CET with the appropriate driver and it works fine, and it is super fast) . If you want to know the driver use on your tablet, run a adb shell and type lsmod (You will have a list of loaded/used driver.)
My advice, if you dont know how to use adb command, do not try it.
I hope this will help.
Best regards.

*Root*SOff*Recovery*ALL-IN-ONE Methods for E988 + Softbrick/unroot/recover to Stock

This post is a collaboration of different posts related to LG OGP E988 model (basically for asian market).
This is not my work* i just making things available in one place to help people to access content easily.
*except modem (India)
Recommended : Read instructions before doing this specially modem flashing. Be sure you back up your EFS to just be safe!
Request: This is special request from all the viewers please try to keep the post clean.​​​If any question please PM me "except how to get back your girl friend and why sky is blue ?"
Post content​
1. Root
2. LG security Off
3. Flashing Recovery CWM/TWRP
4. ROM flashing ( Recovery ) + Modem
Additional
5. Soft Brick/unroot/Recovery/return to stock ROM
Post 2 : Who to make your own baseband recovery​
Well in further i will also try to uplod a video regarding this ALL-IN-ONE performing on my device
1st of all i would like to thank few people (Please let me inform if i forgot someone)
anirudhks
Ballshanglow
Shelnutt2
djrbliss
thecubed
hkfriends
Veenab
Wootever
minnaing
Heylton
NaveenkumarXDA
giantpune
and all the other devs :good:
1. ROOT
The best method which i found out is by Ballshanglow. Steps are elaborated and easy to follow. Just follow 11 steps
*ROOT* for LG Optimus G Pro E980(AT&T), E988(HK), E989(UK) + CWM + TWRP (*Updated*)
2. LG Security Off
Freegee og pro Soff has done it with precision (by Shelnutt2 ) . Just follow the instruction & you will be off from the most missed step.
Freegee OG Pro Edition
3. Flashing TWRP/CWM
Thanks to hkfriends and his effect combined in post. Follow the step carefully and you should have a little knowledge of adb. Take your time read carefully before performing this procedure. Its Important to lokify your device.
[Recovery][TWRP/CWM][HK (E988), KR (F240L, S, K)] Flashable recovery!
4. ROM flashing + Modem ( Recovery )​
For those who are confused about choose ROM its a just a information that you can flash rom which are for E980 but with caution and by proper modem flashing. Recommended : Read instructions before doing this specially modem flashing
Install instructions:
1. Download rom and gapps.
2. Download additional accessories (IR, disable button lights)
3. Just place/or unrar the file (Follow the instruction given by specific rom)
If using recovery method
4a. Copy to sdcard\clockworkmod\backup (if asked)
4b. Go to restore and select the folder and restore.
4c. reboot enjoy
if using flashing method
4. Full wipe
5. Flash the ROM then Gapps + Modem of E988
if required/or asked by the ROM dev " FLASH LOKIFIED CWM RECOVERY OR FLASH MADMACK'S UPDATED TWRP AT THE SAME TIME AS THIS ROM " Link
6. Reboot enjoy.
Modem of E988​
if you can't find the flashable .zip of modem please follow the instruction and replace the .zip manually from the 2nd post below
** its just an example. But if you want change baseband and you want to be sure, Do it your own risk. Neither any dev nor I are responsible for it
Here is the Flashable .zip of E988 baseband (HK): E988-HK-Baseband.zip thnx to anirudhks.
Here is the Flashable .zip of E98810a baseband (India), since its created by me you can create/make mirror of it, I don't have any problem.
Link 2 : Mirror
Please flash it at your risk
5. Soft Brick/unroot/Recovery/return to stock ROM​
The final step is just for the help of those who want additional option for Soft Brick/unroot/Recovery/return to stock ROM
1. Unroot : Just a simple guide by wootever with Pic and all description
[Guide] Unroot/Unbrick - flash official factory firmware with LG Launcher
2. Recovering from Soft Brick or returning to stock
All version of software can be found here
Link 1 : http://forum.xda-developers.com/showthread.php?t=2438088&postcount=1 (by minnaing )
Link 2 : http://lg-phone-firmware.com/index.php?id_mod=25
[Guide][Stock Roms] Return back to stock by Heylton, just follow the steps
Extra perks
ROMs specially designed for E988 :
1. [ROM] 4.2.2 Digital Minds E988 by anirudhks
2. [ROM] 4.3 E988 Based ROM addition SGS4 elements by anirudhks
3. G2 Based E988 ROM (F240/980) by anirudhks
Inform me if you find more
P.S.​* By doing anything described above, you will automatically void your warranty! *
!!!!!!!!!!! I Am Not Responsible For Any Problems Due To Flashing any thing !!!!!!!!!!!!!! ​
Anyone want me to add anything else is most welcome as we all here to help each other :fingers-crossed:
Feel free to criticize and question if any.
"No one is perfect"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

How to make your own baseband recovery (Extracting Modem.img)
This is the step-by-step process of how to extract your Own modem.img and convert it into baseband.zip for Noobs :good:
Steps (You need to have a Root before starting this process)
1. Connect by adb
2. On the terminal type
Code:
[B]adb shell
su[/B]
Check if confirmation is needed on the phone screen. If needed, accept.
3. On the terminal type:
Code:
[B]dd if=/dev/block/platform/msm_sdcc.1/by-name/modem of=/sdcard/modem.img[/B]
4. You will receive the following after some seconds:
Code:
[B]131072+0 records in
131072+0 records out
67108864 bytes transferred in 7.583 secs (8849909 bytes/sec)[/B]
5. Type (Optional)
Code:
[B]exit
exit
adb pull /sdcard/modem.img[/B]
6. Now you have your backup.
How make/pack this backup to a Flashable zip
1. Download the file: E98810a-baseband-India.zip, Link 2:mirror
2. Open the zip file using winrar and just drag and drop the existing modem.img with your file
3. Rename the file Whatever you like
Thats it you have your own flashable baseband File

If this is not your work then it should not be posted to the Original Android Development section. This is the precise reason why @NaveenKumarXDA's CM thread was moved to the Android Development Section. Please message a MOD and ask them to move this thread. I'd also request that it be Stickied, as this could be extremely beneficial to the community.
EDIT: Thanks!

WISH i could have thnk you more .... sorry for my english ... post is like a treasury... i once asked for a different sub-forum but your post is enough for me :victory: :good:

mrfeuss said:
If this is not your work then it should not be posted to the Original Android Development section. This is the precise reason why @NaveenKumarXDA's CM thread was moved to the Android Development Section. Please message a MOD and ask them to move this thread. I'd also request that it be Stickied, as this could be extremely beneficial to the community.
EDIT: Thanks!
Click to expand...
Click to collapse
Concern appreciated bro....

Nice post mate. Thank you, it was a lot simpler than working on the DNA. Check the link in my signature to see how much of a nightmare it was to write a guide for that phone!

Not able to root Optimus G Pro E988 India.
Getting error 'Protocol Failure'.

No luck :s.
It keeps hanging on this step:
3. On the terminal type:
Code:
dd if=/dev/block/platform/msm_sdcc.1/by-name/modem of=/sdcard/modem.img
4. You will receive the following after some seconds:
Code:
131072+0 records in
131072+0 records out
67108864 bytes transferred in 7.583 secs (8849909 bytes/sec)
Click to expand...
Click to collapse
Nothing happens after I put in the code..
PS: Yes I did grant root access on first adb connect

One short Question: A friend of me only wants to root his device,maybe recovery, but no custom rom,so:
is the step "4. ROM flashing ( Recovery ) + Modem " really neccessary? I'm a bit confused about that modem flash, thats new stuff to me.
Thanks in advance

Lamensis said:
One short Question: A friend of me only wants to root his device,maybe recovery, but no custom rom,so:
is the step "4. ROM flashing ( Recovery ) + Modem " really neccessary? I'm a bit confused about that modem flash, thats new stuff to me.
Thanks in advance
Click to expand...
Click to collapse
If your friend only wants root and recovery, just have to use the guide to root then use freegee. BUT, currently a lot of users are facing bootloop issues with freegee, myself included, so if he's not likely to use custom roms for now I'd suggest to avoid it, just until its fixed. Hopefully XD
Also, modem flashing is to flash a working modem for your device in order for network service to work. Some roms built mainly for international or other versions of this device actually work on other versions, just that there's a lack of network service lol. Modem flashing helps in that regard. Correct me if I'm wrong here anyone

syngamer96 said:
If your friend only wants root and recovery, just have to use the guide to root then use freegee. BUT, currently a lot of users are facing bootloop issues with freegee, myself included, so if he's not likely to use custom roms for now I'd suggest to avoid it, just until its fixed. Hopefully XD
Also, modem flashing is to flash a working modem for your device in order for network service to work. Some roms built mainly for international or other versions of this device actually work on other versions, just that there's a lack of network service lol. Modem flashing helps in that regard. Correct me if I'm wrong here anyone
Click to expand...
Click to collapse
Thanks for your reply. If i'm reading correct, freegee is only needed for custom recovery? If so: the recovery was only optional, all we need for sure is root. If we can just stop after that we would be fine.

Lamensis said:
Thanks for your reply. If i'm reading correct, freegee is only needed for custom recovery? If so: the recovery was only optional, all we need for sure is root. If we can just stop after that we would be fine.
Click to expand...
Click to collapse
Yes ..more or less..if all you need is root, stay away from unlocking boot loader for now. By the way, xposed frame work is working fine. I even changed DPI settings using ROM tool box n phone is playing nice.
I have actually started enjoying stock ROM with root n custom dpis.
Sent from my LG-E988 using XDA Premium HD app

In the new Freegee app I get no option to disble "LG security" , what's up with that?
Also I have E988 India version , From forums I could only find E98810a(India) Baseband , is there any newer one than this ? can i flash any E988 BB be it HK one or India one?

prabhjitsinghwalia said:
In the new Freegee app I get no option to disble "LG security" , what's up with that?
Also I have E988 India version , From forums I could only find E98810a(India) Baseband , is there any newer one than this ? can i flash any E988 BB be it HK one or India one?
Click to expand...
Click to collapse
There is 10e also available with only maintainance update. No main changelog
Helping Others is helping Ourself

NaveenKumarXDA said:
There is 10e also available with only maintainance update. No main changelog
Helping Others is helping Ourself
Click to expand...
Click to collapse
I flashed 10a baseband(modem.img) but To no effect , can you give me link for 10e Baseband or your own modem.img so that i can replace modem.img in 10a BB nd build my own 10e Baseband?

Can no longer find Canadian Carriers
Hi, I have an unlocked E988 and use to be able to find and connect to Virgin Mobile in Canada, but now it only finds Bell and Rogers which I'm not with.
I inserted my SIM card and flashed both of the baseband modem files you provided in your OP and still can't connect. What else could be the issue?

tase25 said:
Hi, I have an unlocked E988 and use to be able to find and connect to Virgin Mobile in Canada, but now it only finds Bell and Rogers which I'm not with.
I inserted my SIM card and flashed both of the baseband modem files you provided in your OP and still can't connect. What else could be the issue?
Click to expand...
Click to collapse
Sorry to inform you but the baseband you flashed is either of E980 AT&T or E988 india. So please find dev from canada and ask to provide him baseband of you carrier based ROM.

Question about AT&T E988
So I just traded my HTC One for this beautiful Optimus G Pro and I'm loving it so far. Although I do want to get it rooted and load a custom rom and kernel in the near future. Although I am now reading that AT&T released an update(......10p) that breaks the current root method. The best I can figure its the software version they are talking about. My S/W version is E98010p. Can anyone possibly please point me in the right direction to get this thing rooted? Thanks!

http://forum.xda-developers.com/showthread.php?t=2633262 this worked for my e98010.consider yourself pointed

Actually i flashed the omni rom for e980 and i have already flashed the correct e988 modem, but my phone still can't search the phone signal until i chose it from the network operator in the setting manually. Every time when i reboot the phone, i have to repeat the above steps in order to grab the signal. How can i solve this problem?
My phone is E988 Taiwan version

[tutorial] [micromax a120][wiko rainbow][myphone aguario][BLU Studio 5.0 C HD]

This is a full tutorial for Wiko Rainbow,BLU Studio 5.0 C HD,Explay Fresh ,QMobile i9 ,MicromaxA120 C2C,MyPhone Agua Rio, with rooting, custom recovery and custom rom STEP BY STEP installation.
IF YOU HAVE BLU Studio 5.0 C HD,Explay Fresh ,QMobile i9 ,MicromaxA120 C2C, MyPhone Agua Rio, BACKUP YOUR IMEI
DOWNLOAD:MTK DROID TOOLS
STEP 1 FOR Wiko Rainbow,BLU Studio 5.0 C HD,Explay Fresh ,QMobile i9 ,MicromaxA120 C2C, MyPhone Agua Rio
1-WIKO KITKAT V13 download it here:v13 appears v8 as i said..this is v13 wiko rainbow firmware uploaded by me from OFFICIAL rom..so even it says v8 you know that this is the correct version..flash it with SP FLASHTOOLS:https://www.androidfilehost.com/?fid=23991606952609461
2-extract folder and run SP FLASH TOOLS
3-when rom boots, root the rom and install custom recovery.
4-root HERE:https://www.androidfilehost.com/?fid=23991606952609407
5-extract with winrar and install root as normal apk.
6-install custom recovery :] with flashify or SP FLASHTOOLS like in my video tutorial.
PHILZ RECOVERY KITKAT:https://www.androidfilehost.com/?fid=23991606952592789
TWRP 2.8.2 KITKAT:https://www.androidfilehost.com/?fid=95916177934552002
SP FLASHTOOLS HERE
ADB DRIVERS
step 1 only needed for first time installing a custom kitkat rom for WIKO BASE kitkat
STEP 2-for all custom roms KITKAT after having root and custom recovery
A)enter recovery and backup the stock rom
B) wipe data/factory reset
C) wipe cache and dalvik cache
D)install zip from sd card -your custom rom
CUSTOM ROMS FOR WIKO BASE AVAILABLE:https://www.youtube.com/playlist?list=PLVddAFJHtD21TsCvr7uthGJmpkeQ9G_I0
CUSTOM KERNEL by @moonrotation HERE:http://forum.xda-developers.com/android/general/kernel-wr-kernel-wiko-rainbow-clones-t3003920

if you have MMX 120 C2C FOTA ,stock kk or MYPHONEAGUARIO, EXPLAY FRESH, QMOBILE i9 and want to install a custom rom KITKAT for wiko base firmware see this small video:
in the description you have all download links you need and all on video tutorials very easy to understand.

HOW TO INSTALL CUSTOM RECOVERY:
PHILZ RECOVERY KITKAT:http://d-h.st/2gu3
TWRP 2.8.2 KITKAT:http://smokermanxda.blogspot.pt/2015/04/twrp-282-with-otg-support.html
CARLIV KK :http://d-h.st/Wl6i
new TWRP released..
downloads:download here!

Wiko Rainbow,BLU Studio 5.0 C HD,Explay Fresh ,QMobile i9 ,MicromaxA120 C2C,MyPhone Agua Rio
ALL CUSTOM ROMS HERE:
http://forum.xda-developers.com/t/micromax-a120

Hey nice work buddy

Hey bro,
Good work :highfive:
Much more organised now.

yes..its a bit annoying having all splitted..i have to bookmark threads cause i cant find it one by one..i will add all custom roms here for our phones.

smokerman said:
yes..its a bit annoying having all splitted..i have to bookmark threads cause i cant find it one by one..i will add all custom roms here for our phones.
Click to expand...
Click to collapse
Yeah! v should have a proper thread where v can find most of the tutors and almost all roms so no need to keep on searching..

CUSTOM KITKAT ROMS FOR WIKO BASE KITKAT:
original thread here by me:http://forum.xda-developers.com/android/development/rom-slimpop-t3077197
original thread here by @umangleekha :http://forum.xda-developers.com/android/development/rom-canvas-2-colours-t2863614
original thread here, this rom you can put CM11 THEMES by @mr-illusionist :http://forum.xda-developers.com/android/development/mt6582-ansp-v4-rom-t3056928
original thread here by @vibhu0009 :http://forum.xda-developers.com/android/development/vionicl-t3017145
all new roms and video rreviews HD:
http://smokermanxda.blogspot.pt/
https://www.youtube.com/user/blueangelman13

#edited.

updated.:good:

I need your help...
Hey there!
jd1639 gave me the advice to post my problem in this thread rather than wait for an answer in the xda-assist thread. For not having to write it all again, here is a link to the post I made: http://forum.xda-developers.com/general/xda-assist/unbrick-wiko-rainbow-t3108133 . Seems like noone is able to help me on that issue, but I hope for your knowledge to come up with a solution...
Is it possible to use an update.zip to fix it? Thought of packing the whole stock-rom into a zip-file, rename and install it, and everything would be fine again. Tried to do so, but when I pick the "apply update from sdcard"-option in recovery menu, the system partition is shown instead of the sd card storage, and I don't know how to put the zip onto sys without adb.
If not even a pro like you knows a solution for this, do you think it is still possible to recognize, that I tried to install a custom firmware? Otherwise I could return it to Wiko and hope for a replacement!
Thank you for arguing with my problem by now, please let me know what you think about it.
Regards,
Metal-Moe

@Metal-Moe so let me try to help you..
you have 2 methods:
1.official tool
what you must do? connect your phone and run JB version (it appears v14 on wiko site)..i assume you know how to it.#see below the pictures and minitutorial.
charge your battery to full, this is important!! see if the software recognize your WIKO..run this drivers:https://www.androidfilehost.com/?fid=95916177934554018 and try to connect and reconnect your WIKO in different USB ports after you installed the drivers. (install anyway if appears a security warning)
2.SPFLASHTOOLS-.if doesnt work try the same method but with SP FLASHTOOLS..even in my computer sometimes doesnt recognize when testing developer roms..and i do that ..works for me..you just need to be patient and keep trying..one of the usb ports will work for sure..after it works flash stock JB and see if your IMEI is back..at least have your phone back to life..to restore your IMEI you have many methods..just PM or mention me to have a more faster answer..first lets see if we can bring back your phone from the dead.:good:
note:stock JB makes a folder inside that is SP FLASHABLE like this:

Members. If you report something, and disagree with the outcome of the report, pm the Moderator to discuss.
Do not come back to thread to start trouble.
Thanks,
Darth
Forum Moderator

removed all dev-host links..reuploaded to androidfilehosting.

Thanks anyway!
@smokerman: Unfortunately I wasn't able to solve the problem with the possible solutions you'd mentioned, so I brought the bricked phone back to the local store, hoping it wouldn't be returned unrepaired due to guarantee loss. Two weeks later I got it back and it's working fine! But thank you for your effort in helping me anyway!
Now I'll backup the IMEI with MobileUncle before doing anything else!

Metal-Moe said:
@smokerman: Unfortunately I wasn't able to solve the problem with the possible solutions you'd mentioned, so I brought the bricked phone back to the local store, hoping it wouldn't be returned unrepaired due to guarantee loss. Two weeks later I got it back and it's working fine! But thank you for your effort in helping me anyway!
Now I'll backup the IMEI with MobileUncle before doing anything else!
Click to expand...
Click to collapse
and from that time i ve posted 2 more solutions for IMEI, easy..http://smokermanxda.blogspot.pt/2015/05/fix-imei-wiko-rainbow-micromax-a120.html
and:http://smokermanxda.blogspot.pt/2015/05/how-to-restore-imei-on-any-mtk65xx.html

Thanks for this great tutorial man....

@smokerman I have successfully flashed wiko base firmware v10 with this tutorial... Thanks again..
There is a ota update available from wiko..system>about>update
If i update..will it further change the firmware to latest version v13...or do i need to flash the whole package of v13 for the latest version...

niyas90 said:
@smokerman I have successfully flashed wiko base firmware v10 with this tutorial... Thanks again..
There is a ota update available from wiko..system>about>update
If i update..will it further change the firmware to latest version v13...or do i need to flash the whole package of v13 for the latest version...
Click to expand...
Click to collapse
if you have root and recovery probably you cant update..it will give you a error..but here it is v13 to flash with SP FLASHTOOLS:
v13 appears v8 as i said..this is v13 wiko rainbow firmware uploaded by me from OFFICIAL rom..so even it says v8 you know that this is the correct version..flash it with SP FLASHTOOLS:https://www.androidfilehost.com/?fid=23991606952609461

Haier G30 [W816]

Hello Friends,
I have Haier G30 [W16] 512 MB RAM and 4GB Rom i want to install custom rom in it like cyanogenmod
but i dont have its rom how can i install custom rom in this phone can anyone help me please i have lagg in my phone because of Heavy Firmware and low ram but i want to install custom rom to reduce lag
Thank You

hi waqar.....
i also have haier g30.....
you can install custom rom by downloading blisspop or exodus from mtkroms.com and then porting in your phone.....
if you stuck at any thing i will help you....
however i do not recommend you to install custom rom....
to reduce lag issue you can install greenify

Hello Hasan
Hasan that phone was good and awesome . but i want to upgrade it now because it has lost many feature of this phone because i lost its orignal firmware now i need your help brother if you're in Pakistan contact me on whatsapp "03208367046"
if international just ask me here. i dont know how i port this ? please help me i dont know how i flash it with custom rom etc which software i use

Hey Hassan
tell me first that how i install recovery philz or TWRP?? please tell me this or tell me how i flash this rom which software by using sp flash?? and it saying me replace from stock rom to port kernel , zimage what is this i dont know brother help me urgent

kingwaqar said:
Hasan that phone was good and awesome . but i want to upgrade it now because it has lost many feature of this phone because i lost its orignal firmware now i need your help brother if you're in Pakistan contact me on whatsapp "03208367046"
if international just ask me here. i dont know how i port this ? please help me i dont know how i flash it with custom rom etc which software i use
Click to expand...
Click to collapse
bookmark this thread.... i will contact you later

hassan.seoul said:
bookmark this thread.... i will contact you later
Click to expand...
Click to collapse
oKAY BUT i am on 1st step whenever i tried to install TWRP or Philz Recovery it gives me error
aborting an error has been detected cannot repack recovery

check whatsapp

haier g30 carliv touch recovery + scatter file + mt65xx preloader usb vcom driver
hit thanks

thanks alot brother now just need to install rom how to open boot.img if you can please upload here modifed rom for G30

g30
bro first root ur mobile and install twrp {team win recovery project} and download rom zip and go to recovery first backup ur android after backup go to wipe idwance wipe and wipe system catch data and back to in install choose ur file find in sd card and install it after install reboot system and enjoy

Is it possible to boot samsung firmware with CM bootloader

Hi, title is explaining all.
I need a bootloader for running custom p601 roms on my p602. CM12 bootloader works on my device, P601 bootloader does not. Is is possible to boot samsung firmwares with CM bootloader. ?
Thanks.

Any ideas ?

Any advice ? I don't want to brick my device

Bootloader? I think you mean recovery and no you will brick.

macrostr said:
Any advice ? I don't want to brick my device
Click to expand...
Click to collapse
Mate , the worst situation is that you mess up all the partitions which you can fix using the stock pit files ( for which I made a thread ... here ) ... so don't get frightened and try the recover and the ROM ( even in the recovery , you can't install the ROM because the model number differs ... ) also tell me about the nand structure and the CPU and also the Network support ... If everything is the same (esp the CPU and Nand Structure ) it's alright to give it a try but, if not , It's a waste of time to play this ... so , please provide a bit more detail ...
With Best Wishes
Hitman1376​

Hi guys, thanks for your response
Orion116 said:
Bootloader? I think you mean recovery and no you will brick.
Click to expand...
Click to collapse
Yes, I can install TWRP and flash custom p601 roms (5.0.1) without a problem. When I flash a 5.1.1 custom rom, it did not. I beleive it is because of the new boot.img of 5.1.1 roms.
hitman1376 said:
Mate , the worst situation is that you mess up all the partitions which you can fix using the stock pit files ( for which I made a thread ... here ) ... so don't get frightened and try the recover and the ROM ( even in the recovery , you can't install the ROM because the model number differs ... ) also tell me about the nand structure and the CPU and also the Network support ... If everything is the same (esp the CPU and Nand Structure ) it's alright to give it a try but, if not , It's a waste of time to play this ... so , please provide a bit more detail ...
With Best Wishes
Hitman1376​
Click to expand...
Click to collapse
It'is identical to SM-P601 variant of note 10.1^2014, Just the RIL part is modified for not to support voice calls, It only use sim to connect network. When I flash p601 roms, I am able to make voice calls. I also make thread about it here. Partitioning is differs from p601 too. It's not the same but similar. One of my friends overwrite the pit with p601 stock roms and bricked the device before. I can boot with cm12 and cm13 roms for p601. But I want to use 5.1.1 stock or stock based roms.

macrostr said:
Hi guys, thanks for your response
Yes, I can install TWRP and flash custom p601 roms (5.0.1) without a problem. When I flash a 5.1.1 custom rom, it did not. I beleive it is because of the new boot.img of 5.1.1 roms.
It'is identical to SM-P601 variant of note 10.1^2014, Just the RIL part is modified for not to support voice calls, It only use sim to connect network. When I flash p601 roms, I am able to make voice calls. I also make thread about it here. Partitioning is differs from p601 too. It's not the same but similar. One of my friends overwrite the pit with p601 stock roms and bricked the device before. I can boot with cm12 and cm13 roms for p601. But I want to use 5.1.1 stock or stock based roms.
Click to expand...
Click to collapse
So, if it's this way , give " Binh24 mod " stock 5.1.1 ROM a shot ... Happy Flashing ... :laugh:

hitman1376 said:
So, if it's this way , give " Binh24 mod " stock 5.1.1 ROM a shot ... Happy Flashing ... :laugh:
Click to expand...
Click to collapse
I flashed the binh24 mod, but not booted up, not even show samsung logo, just tried to boot and go back to recovery.

macrostr said:
I flashed the binh24 mod, but not booted up, not even show samsung logo, just tried to boot and go back to recovery.
Click to expand...
Click to collapse
You know why ? ( no that's not " Because sky is high !!! " ) the reason is that you have the KK Bootloader which causes the problem ... as you know , first you need to flash a P601 firmware to get the new bootloader ( Extremely Important Note !!!! ... Do not even think of ( ) ticking the " Update bootloader " in the Odin which makes you blame your self later ... !!!! the lollipop boot loader is installed by it self ... just do nothing about it ...) try if it get's installed that way ... also take a look at this ... maybe you find it useful ( to convert the P602 to P601 !!! ) Note that I haven't tried it on Lollipop CM or some other ROMs so make a backup first !!! ... If you couldn't install the Odin way , there are other apps and if they failed , then find the Multi-file version of P600 / P601 Lollipop ROM to flash the bootloader part directly ... Good luck :good:

hey dude have you ever found something about 5.1.1 bootloader for p602? I need that

I have restored my device which is a Samsung Galaxy Note 10.1 edition 2014 by using the settings>restore method. However, the screen is not going on, staying constant as i showed with photo below. I have opened the case of tablet, i have extracted the battery, and connected it again. No way, it does not continue, stays as constant like the photo. Is there anyone who can provide a solution?
Best
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

@agesilaus have tried flashing original Samsung firmware with Odin?

Hello All, much worse happened to me: after 8 years of resistance I figured 4.2 is way too old so went for the stock update on the device. It was downloading for too long, stopped 3 times during the process. I guess it is when it got damaged as the above nice samsung logo got stuck after reboot. When I tried to boot to recovery it does the flashing again (definition of insane - doing the same expect different result) and that's all hangs in the air again. (Exactly as it is shown above on the picture - waited until the tabled discharged.)
I could boot to download but the latest odin doesn't like the stock image (hoping it is that, if anyone has a safe copy a share would be appreciated).
One more info the machine is badly overheating, ADB connects, but says device is not authorised and I can't remember if I had any PC enabled for the device would be still alive...
Many thanks for any hints.

@xantbubus for that old firmware I'd take Odin 3.09.
Using the multiple file firmware is safer.
You don't say which device exactly.
Which region?

bmwdroid said:
@xantbubus for that old firmware I'd take Odin 3.09.
Using the multiple file firmware is safer.
You don't say which device exactly.
Which region?
Click to expand...
Click to collapse
Hello, thank you so much, apologies, it is sm-p602, the region is Turkey (althugh I live in Hungary but it was bought there).
Do you have a link for split firmware? They say even sm-p601 is working perfectly only the restriction on the call is lifted...

@xantbubus if sammobile, samfrew or others don't let you have them, use SamFirm_Reborn_0.3.6.3 which will definitely give you multiple files (if settings are correct ).

bmwdroid said:
@xantbubus if sammobile, samfrew or others don't let you have them, use SamFirm_Reborn_0.3.6.3 which will definitely give you multiple files (if settings are correct ).
Click to expand...
Click to collapse
Thanks, google was not really my friend on this. Btw, I resolved the issue. Unfortunately I needed to clean the data partition but after that it worked. I guess the 3.09 odin also played part as earlier it was trying to reflash instead of going to recovery so thank you all!

xantbubus said:
Thanks, google was not really my friend on this. Btw, I resolved the issue. Unfortunately I needed to clean the data partition but after that it worked. I guess the 3.09 odin also played part as earlier it was trying to reflash instead of going to recovery so thank you all!
Click to expand...
Click to collapse
Glad I could help.
Now you're entitled to hit "like"

bmwdroid said:
Glad I could help.
Now you're entitled to hit "like"
Click to expand...
Click to collapse
sorry, a bit new to this, hope this is enough