[KERNEL][ALPHA][STOCK/CROMI] JB 4.2 ★ Hundsbuah ★ 10.6.1.8.4 ★ TF300T Base
Thanks to: _that, sbdags, steveman29 and all testers out here
If you like my work you can donate by clicking the link below:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=BGD8ETXAPXNEQ
Please tell me your xda nickname in the donation!
Donators: steveman29, bads3ctor, Douglas Wing, pastorbob62, Yamir Gonzalez, ziggy71
Hi guys,
as you asked so often if i can make the tf700t kernel also for tf300t users, ill try to merge all oc settings done now for the working tf700t also for the tf300t, including the kind of limiting the frequencies as it is possible with the tf700t version of my kernel right now (via app and terminal)
we have to manage following steps and i need the help of the community. i dont own a tf300t device, so i need testers who can test my new testkernels on a tf300t devices.
following steps have to be done:
- the first step is to get the kernel working on a tf300t device without oc [DONE]
- next step will be to overclock the tf300t device staticly [DONE]
- the last step will be to offer a runtime limiting of the cpu and gpu frequencies as it is possible with the tf700t kernel right now. the difficulty is to differ between the different devices in the kernel code (it is a kernel for 2 different devices, yes both are tegra3, but not the same hardware) [DONE as based of tf300t kernel sources]
HEY, we made some good progress until now
what you will have at the end?
a (i hope so ^^) working tf300t kernel where you can choose during runtime which oc'ed frequencies you want to run on your cpu and gpu. [DONE]
Need help - Still something unclear?: THX lucius.zen
http://forum.xda-developers.com/showthread.php?t=2232715
My App to Limit CPU and GPU Frequencies:
v1.5
- fixed double warning if no hundsbuah kernel is used
- added feature to store cpu settings to asus power modes
- added feature to store gpu settings to asus power modes
- fixed app force close when trying to save to an asus powermode (please report if its really gone )
- have fun
http://www.mediafire.com/download/18adjqe710y394c/HundsbuahsKernelTweaksv1.5.apk
v1.61beta
- autoload on page load
- removed asus keyword from buttons and labels to fix display issue on smaller screens
http://www.multiupload.nl/XPIIIIVG38
Testkernel (20130521)v11 - TF300T BASE:(Please activate init.d support with pimp my rom app)
- little bit higher voltages for all cpu revisions and 1600mhz+ (try if its better now)
http://www.mediafire.com/?5mr686tby6zxsi8
Data2SD Patch for v7 and newer!:
Just flash it in twrp after you have flashed the kernel. thats all. your sdcard needs a 2nd partition with ext2 or ext4 with (windows: active, linux: boot) flag set
http://www21.zippyshare.com/v/49688197/file.html
Thank you all for your help!
Source:
https://github.com/Hundsbuah/tf300t_10_6_1_8_4
Tf700T Thread:
http://forum.xda-developers.com/showthread.php?t=2143093
Hi mate,this kernel boots just fine but it's having the same display issue as the first kernel for the tf700t (remember?heavy screen tearing and flickering when touching the screen).Otherwise wi-fi seems to work and the OS loads just fine.Here's a logcat,maybe it will be useful:
Edit:Here's a second logcat
Pretoriano80 said:
Hi mate,this kernel boots just fine but it's having the same display issue as the first kernel for the tf700t (remember?heavy screen tearing and flickering when touching the screen).Otherwise wi-fi seems to work and the OS loads just fine.Here's a logcat,maybe it will be useful:
Click to expand...
Click to collapse
great, but no bootloop or restart? just screen flashing/flickering?
Hundsbuah said:
great, but no bootloop or restart? just screen flashing/flickering?
Click to expand...
Click to collapse
No bootloop or restart .
BTW,i also uploaded a second logcat to the previous post .
So excited!!!
Sent from my Incredible 2 using xda app-developers app
Pretoriano80 said:
No bootloop or restart .
BTW,i also uploaded a second logcat to the previous post .
Click to expand...
Click to collapse
ok maybe its caused by the mixture of the tf700t and tf300t ramdisk, im currently uploading a kernel with an original tf300t asus ramdisk.
hope that helps ill post the new testkernel as v2 in the op.
thx so for for testing!! :good:
Pretoriano80 said:
No bootloop or restart .
BTW,i also uploaded a second logcat to the previous post .
Click to expand...
Click to collapse
btw: what are the stock cpu and gpu speeds of a tf300t?
cpu 1300mhz and gpu 416mhz?
Hundsbuah said:
ok maybe its caused by the mixture of the tf700t and tf300t ramdisk, im currently uploading a kernel with an original tf300t asus ramdisk.
hope that helps ill post the new testkernel as v2 in the op.
thx so for for testing!! :good:
Click to expand...
Click to collapse
Thanks for all your dedication man!
I flashed and got a booting device!
However, HORRIBLE lag, and insane screen glitches. I grabbed a last_kmsg for you.
http://www.mediafire.com/?v0yc7kpy6bdy1my
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
When this gets a little more stable I will start testing. I would start now but need my tablet woking for the next few hours.
elesbb said:
Thanks for all your dedication man!
I flashed and got a booting device!
However, HORRIBLE lag, and insane screen glitches. I grabbed a last_kmsg for you.
http://www.mediafire.com/?v0yc7kpy6bdy1my
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
that was the last_kmsg from the recovery. you must restart 1x to get my kernel last_kmsg
/edit: what version was this? v1 or v2?
Hundsbuah said:
that was the last_kmsg from the recovery. you must restart 1x to get my kernel last_kmsg
/edit: what version was this? v1 or v2?
Click to expand...
Click to collapse
Version one. Just saw version 2 now. And i thought i did. must have not overwrote it. Sorrry. Flashing version two now.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Same graphical issues with v2 too.Here's the last_kmsg:
Pretoriano80 said:
Same graphical issues with v2 too.Here's the last_kmsg:
Click to expand...
Click to collapse
Same thing for me. Here is my last_kmsg. Now i flashed, booted once, rebooted, grabed the last_kmsg but its 0 bytes?
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
No 3.0.3 test kernel link
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
---------- Post added at 08:22 PM ---------- Previous post was at 07:47 PM ----------
Goddly said:
No 3.0.3 test kernel link
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
Click to expand...
Click to collapse
Btw we desperately needed a dev for kernels for the 300 , especially because there is none for 4.2. Oh btw your kernel, modded by sbdags 1.3-1.8 on 4.1 was my favorite by far
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
I actually run one of your older kernels on my TF300. Its the V1.4.4 for your TF700 and I have never had a problem with it. The front camera works. The OC works to 1.8GHZ and it gets me the best benchmarks I've ever gotten on this guy. I've tried newer versions of your TF700 kernel and they all seem to work too, except for the OC.
hardslog said:
I actually run one of your older kernels on my TF300. Its the V1.4.4 for your TF700 and I have never had a problem with it. The front camera works. The OC works to 1.8GHZ and it gets me the best benchmarks I've ever gotten on this guy. I've tried newer versions of your TF700 kernel and they all seem to work too, except for the OC.
Click to expand...
Click to collapse
On 4.2.1?
Sent from my Incredible 2 using xda app-developers app
I'm so happy you will help us!! We so desperately need a kernel.. Thanks a lot!
d08speed3 said:
On 4.2.1?
Sent from my Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
No, sorry on 4.1.1
joelalmeidaptg said:
I'm so happy you will help us!! We so desperately need a kernel.. Thanks a lot!
Click to expand...
Click to collapse
+1
Enviado desde mi ASUS Transformer Pad TF300T usando Tapatalk 2
i am away from making a tf300t kernel on tf700t base.
i merged all my oc settings to a clean tf300t asus base.
im currently uploading the new testkernelv4.
ill post it as always in the op.
cpu oc: 1500mhz
gpu oc: 520mhz
please report
Related
ROOT REQUIRED
adb shell
su
adb push build.prop /system
or you could just paste it into root explorer replacing your existing
(back up existing or rename it to build.prop.bak just for safe keeping )
then make sure you set proper permissions
rw -r -r
then reboot
NOW UPDATED AND ALL TWEAKS HAVE BEEN PORTED TO THE LATEST JELLY BEAN OTA
This is a modified build.prop to include all the latest ics tweaks
(from a build.prop standpoint)
Code:
forced 60fps
faster wifi connect and suplicant scan set at 100 (battery saver as well)
added deep sleep mode
added screen dithering
removed checkin back to base
kernel tweaked
dalvik mins and max set higher than stock
increased over-all fling velocity min and max now set
min at 8000 and max at 12000
a few nvidia specific graphics tweaks as well
. power collapse disable enabled
-and just a few i dont feel like explaining google is your friend
i include these in my skyrocket roms
and after three days of testing
these prove to make the best performance
and best battery saving lines
DOWNLOAD IN SECOND POST
ASUS TRANSFORMER TF300
SAFE AND TESTED BY ME WILL NOT HARM YOUR DEVICE
OTA IS SAFE AND SO IS THE MARKET THESE DO NOT TOUCH THOSE..
THESE ARE ADDITIONS NOT SPOOFS OR CHANGES
ICE CREAM SANDWICH
Build.Prop .26 US
http://d-h.st/lSz
Build.prop .29 US
http://d-h.st/XTs
WW Tf300tg .40 modded
http://d-h.st/Nw2
WW tf300tg .40 stock
http://d-h.st/A17
.
JELLY BEAN
NEW JELLY BEAN US 10.4.2.9
http://d-h.st/gED
Stock US JB Build.prop
http://d-h.st/qVO
.WW 10.4.2.9 Stock
http://d-h.st/iDO
WW 10.4.2.9 Tweaked
http://d-h.st/zjw
Where is the file?
JustusIV said:
Where is the file?
Click to expand...
Click to collapse
It's a secret!
lol sorry guys guess it never took after i clicked save reuploading now
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
edit
it wouldnt let me attach a file to OP .. maybe bc its General ???
either way linked it on dev host
check second post
Has anyone tried this?
camblue said:
Has anyone tried this?
Click to expand...
Click to collapse
I did, didn't notice too much of a difference, though I guess you could say it's faster.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Anyone tried this on the Prime TF201?
Sent from my LG-P999 using xda premium
ShotSkydiver said:
I did, didn't notice too much of a difference, though I guess you could say it's faster.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
Cool i just worry about build prop changes and the ability to receive future OTA updates but i guess you can just change it back
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
No these changes are basically bools and switches no density or market tricks here just battery life. Faster and quicker flinging. Constant 60fps
Allowing pad to deep sleep and like fifteen others. Like I said download it and open it. Everything past 60 fps in the code should work on any android device running ics... and some are tegra specific do not use this on tf201. Simply copy build.prop lines line for line and add them in manually or upload ,me yours and I'll make proper adjustments....
. these do work and make a difference . Let it cache. I have been playing with these values for months
This isn't my first rodeo guys. Check my skyrocket thread I do this daily and have been for years
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
seanzscreams said:
No these changes are basically bools and switches no density or market tricks here just battery life. Faster and quicker flinging. Constant 60fps
Allowing pad to deep sleep and like fifteen others. Like I said download it and open it. Everything past 60 fps in the code should work on any android device running ics... and some are tegra specific do not use this on tf201. Simply copy build.prop lines line for line and add them in manually or upload ,me yours and I'll make proper adjustments....
. these do work and make a difference . Let it cache. I have been playing with these values for months
This isn't my first rodeo guys. Check my skyrocket thread I do this daily and have been for years
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
Click to expand...
Click to collapse
Cool will give it a wirl and report back thank you
Sent from my ASUS Transformer Pad TF300T using xda premium
So we should see a bit of battery life increase with this mods?
I've flashed just about every ROM for the Skyrocket and Sean's is still the best by far, so he definitely knows what he's doing. I'm glad you're doing stuff for the TF300, as I am own one of these as well. Thanks!
http://forum.xda-developers.com/showthread.php?t=1625299
Are you able to input this? Battery life on my epic 4G Touch is insane now...
Sent from my SPH-D710 using xda premium
First we need ti find out if the bootloader is locked or unlocked d
Next we need recovery
Andl then i need to deodex and zipalign and we will have init.d and custom roms from me asap
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
Just did this and I can tell you that there is a noticeable difference in speed, page loading, and just general snappiness of the tab, good work, thank you!
Thanks for posting!!! :-D
Sent from my ASUS Transformer Pad TF300T using xda premium
you said this would work on any ICS device and there's some coding for tegra3 specific things. why did you said do not load this on the 201? why wouldn't they work?
demandarin said:
you said this would work on any ICS device and there's some coding for tegra3 specific things. why did you said do not load this on the 201? why wouldn't they work?
Click to expand...
Click to collapse
seanzscreams said:
Like I said download it and open it. Everything past 60 fps in the code should work on any android device running ics... and some are tegra specific do not use this on tf201. Simply copy build.prop lines line for line and add them in manually or upload ,me yours and I'll make proper adjustments...
Click to expand...
Click to collapse
I'm guessing even though the Prime runs tegra3 there is code specific to the 300.
Sent from my ADR6300 using xda premium
seanzscreams said:
First we need ti find out if the bootloader is locked or unlocked d
Next we need recovery
Andl then i need to deodex and zipalign and we will have init.d and custom roms from me asap
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
Click to expand...
Click to collapse
I thought tge bootloader was locked on tge tf300...
Sent from my SPH-D710 using xda premium
Hi
This ROM is CM10 compiled from aremcee work. Device repo and Kernel repo
It include my overclock kernel and some more modification.
Settings i use in CM10:
Settings-Wi-Fi-Advanced-Keep Wi-Fi on during sleep
Only when plugged in
Settings-Performance-Memory management
zRam=disable
allow purging of assets=checked
Kernel samepage merging=uncheck
Settings-Location services
Location & Google search=uncheck (but you need it for Google now)
Settings-Developer options
Force GPU rendering=uncheck (check for hi score benchmark only)
Settings-Display-automatic backlight
Enabled=checked
Sample interval=5s
View attachment 1185940
Gapps for CM10
More in detail:
V1
Update to last CyanogenMod change.
Add tdmcode - Fix crash when bringing up cpu1 from userspace
Add Nova Launcher app.
Add AwesomeBEATSv3 in this rom.
Add Alloy White theme.
Add SuperCharger V6 to the rom
You can overclock to 1728mhz and change voltage too.
Use System Tuner app to change CPU freq. and Voltage in real time.
The Gpu is overclock from 266mhz to 300mhz for 3d and from 200mhz to 229mhz for 2d.
You can change GPU freq. from system/init.d/99GPUoverclock file.
Click to expand...
Click to collapse
Initial release
Click to expand...
Click to collapse
Enjoy!
P930
cm-10-20130217-HyperSonic-V1.1-p930.zip
SU640
cm-10-20130217-HyperSonic-V1.1-su640.zip
HO!NO! said:
This rom is really at is debut for testing only
Need some tester for overclock, undervolting and governor effect on the rest of the rom.
many thing will be add when it will be more stable.
happy testing!!
HO!NO!_cm-10-20121215-UNOFFICIAL-p930.zip
Click to expand...
Click to collapse
Thanks! Going to test it, and is there any details about this rom?
Again, TY HO!NO!
Downloading right now and I'll flash it and give it a run and report back.
Installed but I cannot receive calls. I did once but I am not sure what I was configuring at that time so please help me with that issue, phone number is "Unknown" in about phone.. Other than that it is smooth and quick.
Maybe try flashing a baseband again .
Sent from my LG-P930 using xda premium
Makoers said:
Maybe try flashing a baseband again .
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
Looks good. Seems to be working with my trial calls. Thanks.
HO!NO! said:
This rom is really at is debut for testing only
Need some tester for overclock, undervolting and governor effect on the rest of the rom.
many thing will be add when it will be more stable.
happy testing!!
HO!NO!_cm-10-20121215-UNOFFICIAL-p930.zip
Click to expand...
Click to collapse
I volunteer to be a guinea pig for the oc/uv lol. I'm just now getting to flashing. Thank you HO!NO! and good to see you're still coming around!
HO!NO!
Does this Alpha ROM include your OC/UV kernel b/c I'm not seeing the 99ocvoltcontrol or 99GPUoverclock files. As well, the init.qcom.post_boot.sh doesn't have the options to set governer and OC. Is that something you're waiting to release due to on going issues?
He's waiting for people to volunteer for the oc/uc. This is just alpha release with no kernel tweaks. (This is my assumption with information he has provided in the op)
Sent from my LG-P930 using xda premium
cashy57 said:
He's waiting for people to volunteer for the oc/uc. This is just alpha release with no kernel tweaks. (This is my assumption with information he has provided in the op)
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
In that case, I raise my hand to test.
Sent from my LG-P930 using xda premium
Shows OC values
cashy57 said:
He's waiting for people to volunteer for the oc/uc. This is just alpha release with no kernel tweaks. (This is my assumption with information he has provided in the op)
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
I've just installed this build and indeed I am seeing OC values of 1566, 1620, 1674, 1728, 1782, 1836, 1890, 1944
I have not messed with the voltages at all yet however, but I assume they would be there too.
ROM runs smooth and fast but already had two bsod
Sent from my LG-P930 using xda premium
With system tuner i was able to overclock and undervolt without problem and they stick after reboot.
Sent from my LG-P930 using xda premium
OMG. Man, i waited so long for this, I moved to the S3. Still gonna drop by here though, check up on this. It's a HO!NO! work, it's bound to be sick, amirite?
GREAT!, After nitro hd version stabilized and u got spare time, wish to hv a su640 version :]
HO! NO! You are awesome. I am willing to be a kernel guinea pig as well.
Screenshots?
Sent from my DROIDX using xda app-developers app
my experience so far
I flashed it last night and used pimpmyrom to tweak a few settings (no change on dalvik and multitasking). 1728 seems unstable to me. But I read that this ROM has no uv so I might give that a try.
What values should I decrease for uv?
kenship said:
I flashed it last night and used pimpmyrom to tweak a few settings (no change on dalvik and multitasking). 1728 seems unstable to me. But I read that this ROM has no uv so I might give that a try.
What values should I decrease for uv?
Click to expand...
Click to collapse
I used X0dus' numbers from his FT undervolt guide in the general section and I'm running stable at 1728. I don't have PmR or anything else running on it at the moment. This ROM does, in fact, have uv; as HO!NO! said, use System Tuner to set the values.
rom run very smooth with the new kernel, but the taskkiller is too aggressive , keep killing the browser , battery drain is better but still not sleeping well Thank you!please keep it up!
Nibbles Kernel Is Here!
Thanks to Krazeecracker for letting me take over!
Thanks to Android88 for helping me test my builds into the wee hours of the night
THIS WILL WIPE CURRENT INIT.D SCRIPTS. MAKE SURE YOU BACK THEM UP!
I did not create this Kernel, I just maintain and add features to it. Give total credit to CVD as this is his creation and body of work. He made this possible. ALSO BIG SHOUTS OUT TO THOMAS.RAINES FOR THE BASE KERNEL LZ KERNEL
Features: The Nibbles kernel includes a LOT of new features that cater to all users who want to get the most out of their device. I've included many popular CPU Governors and I/O schedulers to support a wide variety of uses. Additionally, I've made lots of other fundamental changes to the kernel to better balance battery and performance (well beyond what you can do with a handful of scripts) as well as implementing over clocking the CPU to 1.782GHz, Under/Over Volting the CPU at each frequency step and over clocking the GPU.
CPU Governors: intellidemand, pegasusq, gallimaurfy, interactivex, smartassv2, wheatley, interactive, conservative, userspace, ondemand, performance
I/O Schedulers: noop, deadline, cfq, sio, vr, bfq
***DOWNLOAD Nibbles Kernel v0.1.5 HERE!***
Changelog:
1/2/2013
- Resumed building, added New Gov - LULZACTIVE
- Working Radio
1/3/2013
- added New Gov - Lagfree
- Fixed Vibration
- Added Overclocked GPU Version
1/4/2013
- Fixed wifi bug
- Modded 02governor script in init.d for ondemand governor for battery battery life
1/7/13
-- New Governors added: Adaptive, superbad, Abyssplug Credit to Ktoonsez for the help and the governors [GS3 Kernel developer]
Governors explained
http://forum.xda-developers.com/showpost.php?p=36417070&postcount=256
Click to expand...
Click to collapse
--Added GPU oc script set to 320/228 [still need to determine if it's fully effective since I do not know how to change gpu on coding level]
--Undervolted kernel a little more than previous builds, check my github for the settings
-- Removes lulzactive due to freezing and rebooting
Builds should resume as normal as i FINALLY, FINALLY, FINALLY!! found a way to compile the kernel with no problem
BIG THANKS TO THOMAS.RAINES, PTMR3, TMOGALAXYS2 & CVD HIMSELF!!
Stock GPU Speeds: http://d-h.st/UyR
MD5: 7b90a8b59b6e88ff7e547855518590b5
GPU Clock Moderate (3D @ 320MHz / 2D @ 228MHz): http://d-h.st/ALY
MD5: e2167b414ff0c23e1754bb9a60ecbd14
For those who are having trouble with ^^ these versions, use this oneDownload: Nibbles_Kernel_0.1.5_Stockfix.zip
md5: 3a08e6f9cefaca4f442f9dbb02eb1793
Source Code: https://github.com/Ayysir
***Settings Recommendations*** by CVD
Click to expand...
Click to collapse
Below are some settings that I use on ROMS and this kernel for best performance and battery.
CPU Governor: ondemand
Scheduler: CFQ
Settings->Developer Options: On
Settings->Developer Options->Window animation scale: 1x
Settings->Developer Options->Animation duration scale: .5x
Settings->Developer Options->Transition animation scale: .5x
Settings->Developer Options->Force GPU rendering: On
Apex Launcher->Advanced->Keep in memory: On
Settings->Wi-Fi->Advanced->Keep Wi-Fi on during sleep: Always
Settings->Wi-Fi->Advanced->Avoid Poor Connections: On
Settings->Wi-Fi->Advanced->Notify open network: Off
Click to expand...
Click to collapse
To add to OP -
Battery Screenshot
Benchmark Screenshot
Make OP look cleaner
This will work on the following roms:
AOSP based roms
Will not work on:
ICS and below
Touchwiz
Test and let me know?
First Woohoo
Thank you Kernel Chef. We appreciate your time in the Kitchen.
Nice! I've been hearing good things about this kernel in the skyrocket thread. Thanks for sharing.
woohooo...hope this kernel will finally work for me. just a question whats advantage n disadvantage of gpu overclocking.
Sent from my ASUS Eee Pad Transformer Prime TF201 using xda premium
This work rom android 4.0.4...
Enviado desde mi SGH-T989 usando Tapatalk 2
mataflakitas said:
This work rom android 4.0.4...
Enviado desde mi SGH-T989 usando Tapatalk 2
Click to expand...
Click to collapse
I think only JB if I'm not mistaking...
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
---------- Post added at 08:14 AM ---------- Previous post was at 08:12 AM ----------
Never mind Just seen won't work on TW....
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
hlimbu00 said:
woohooo...hope this kernel will finally work for me. just a question whats advantage n disadvantage of gpu overclocking.
Sent from my ASUS Eee Pad Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
Smoother gameplay for gaming lol
MandoH said:
I think only JB if I'm not mistaking...
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
---------- Post added at 08:14 AM ---------- Previous post was at 08:12 AM ----------
Going to try this on Jedi Jelly....
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Let me know if it works so i can add it to the list
krazeecracker said:
Smoother gameplay for gaming lol
Let me know if it works so i can add it to the list
Click to expand...
Click to collapse
OK.. will do.. Here goes
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Flashing on liquid smooth
Sent from my SGH-T989 using xda app-developers app
Let me know guys! I tested all last night and this morning and its perfect for me.
***Can confirm it doesn not work on Jedi Jelly... Gets stuck at Samsung screen and Goes black.. Must be due to insecure kernel!!... O well... THanks Kraze!!!
MandoH said:
***Can confirm it doesn not work on Jedi Jelly... Gets stuck at Samsung screen and Goes black.. Must be due to insecure kernel!!... O well... THanks Kraze!!!
Click to expand...
Click to collapse
The kernel is not for stock/touchwiz based roms
Sent from my SGH-T989 using xda premium
wyldkard said:
The kernel is not for stock based roms
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Was confirming this!!!.. lol Thats why i did it!!
MandoH said:
Was confirming this!!!.. lol Thats why i did it!!
Click to expand...
Click to collapse
It was already stated in the OP
Sent from my SGH-T989 using xda premium
So does this mean the stock gpu version have better battery life and the OC'd gpu version is better for gaming?
Also, new governors.... so much testing to do
"there is no spoon"
Is this the successor to your Lightning Zap kernel?
Sent from my Samsung SGH-T989 running CM10 by TeamChopsticks.
wyldkard said:
It was already stated in the OP
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
If it was i missed it or it was added after!!!! ... Kraze had asked me for feedback!!..
dennis96411 said:
Is this the successor to your Lightning Zap kernel?
Sent from my Samsung SGH-T989 running CM10 by TeamChopsticks.
Click to expand...
Click to collapse
Yes lol. CvD over in the skyrocket forums took this and tweaked it for everyone's taste. I tweaked it for our Hercules
Here is a kernel Houstonn and I have been working on. It's based on Faux123 kernel for nexus 4, however, it has evolved into a "buffet" kernel. I keep choosing what i believe is the better interface / way of doing things in a choice of various way or what could give us better battery / performance. I'm trying to maintain a certain balance.
This version is for geehrc (Sprint/Internationnal) with the 13mp. If you have the 8mp phone (E973/E971/E970), use that thread : http://forum.xda-developers.com/showthread.php?t=2229742
I won't link to Faux123 kernel in the nexus 4 for the simple reason that 99% of the people don't read and on these 99% of people, a few will end up flashing nexus 4 kernel which mostly flash by partition number and not by partition name thus hard bricking their device.
Reason to at least try it :
CPU voltage table
Intellidemand and Wheatley governor added
All the block I/O scheduler
TCP Westwood algorithm
Faux123 sounds interface
Faux123 gamma interface (color control)
Newest Prima (wifi) driver.
In-kernel thermal watching
Msm_mpdecision (In-kernel OpenSource MPDecision)
Thanks :
Houstonn
Faux123
Show-P1984
FranciscoFranco
Shelnutt2
XpLoDWilD
Thracky
Synergye
Exit_only
All the downloads will be here :
Use the geehrc version.
http://ribs.bbqdroid.org/houcha
My source are there :
https://github.com/chadouming/smoocha
Reserved post. Also please post comment / bugs in that thread : http://forum.xda-developers.com/showthread.php?t=2246152
There is 10000 variants for that phone and I want to offer that kernel to everyone, however, i can't maintain 10000 threads. I will follow only 1 thread for the geehrc which is the one i previously linked and one for the geeb.
Cool. Now I just need to sack up and flash an AOSP ROM. :/
Sent from my LG-LS970 using xda app-developers app
Updated for smoocha. Please post in http://forum.xda-developers.com/showthread.php?t=2246152
Thanks for the update, running this on the 6/22 build of AOKP and loving it. Especially with dancedance and fiops.
Sent from my Optimus G using xda app-developers app
Just wanted to say thanks for continuing development
Sent from my LG-LS970 using Tapatalk 2
Overclock
Does this kernel allow for overclocking?
copitlory said:
Does this kernel allow for overclocking?
Click to expand...
Click to collapse
No it doesnt make this phone any faster, but only drain more battery.
Newest build has rotation problem fixed.
chadouming said:
Newest build has rotation problem fixed.
Click to expand...
Click to collapse
Rotation problem as in the YouTube issue? Because I still need to disable hardware overlays for landscape mode to play properly on the newest build.
Sent from my LG-LS970 using xda premium
mistermidas said:
Rotation problem as in the YouTube issue? Because I still need to disable hardware overlays for landscape mode to play properly on the newest build.
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
On that, i blame the rom. Working fine here and with multiple user i have talked to.
chadouming said:
On that, i blame the rom. Working fine here and with multiple user i have talked to.
Click to expand...
Click to collapse
Which ROM are you using?
Sent from my LG-LS970 using xda premium
chadouming said:
On that, i blame the rom. Working fine here and with multiple user i have talked to.
Click to expand...
Click to collapse
How about the stretched camera issue?
Sent from my LG-LS970 using xda premium
mistermidas said:
Which ROM are you using?
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
Cyanogenmod compiled with CAF driver.
there is a version for sprint on my server : http://ribs.bbqdroid.org/
javskies said:
How about the stretched camera issue?
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
+1 on stretched camera issue and now my experience is reversed. the only camera app i can get to work is stock. Orientation is fuxored in 3rd party apps and its choppy.
chadouming said:
Cyanogenmod compiled with CAF driver.
there is a version for sprint on my server : http://ribs.bbqdroid.org/
Click to expand...
Click to collapse
You just made my night! Thank you, good sir!
I'm unable to turn on WiFi with the latest smoocha (2013-07-07-17 etc).
Anyone else?
ihitcows said:
I'm unable to turn on WiFi with the latest smoocha (2013-07-07-17 etc).
Anyone else?
Click to expand...
Click to collapse
Its working for me on latest rootbox.
Sent from my LG-LS970 using xda premium
chadouming said:
Cyanogenmod compiled with CAF driver.
there is a version for sprint on my server : http://ribs.bbqdroid.org/
Click to expand...
Click to collapse
Getting System UI crash on 07/08 build.
Hey all, I decided to go to the darkside and move away from stock.
This kernel is a fork from chadouming and Team Placeholder. with that being said, thank you to both.
This has only been tested Android 4.3, I do not believe it will work on 4.2.
SOURCE
Kernel Features
Voltage
Haptic and Vibration control VIA Faux Clock
Linaro 4.7.4
-03 Optimization
XZ Compression
More coming soon!
Just in case...
I'm really psyched to see where this goes. Thanks and good luck! :good:
Good Job
Sent from my LG-LS970 using xda app-developers app
Will try this out... THANKS!
Sent from my LG-LS970 using xda app-developers app
holy guacamole
Super excited to see you make a kernel for aosp. Will be my go-to. I would like to request frandom support in the kernel. Smoocha kernel had frandom support and I believe it really did help performance. I first read about frandom from the Crossbreader thread in the general android section. Here's the paragraph:
"5. Frandom support (Optional) - CrossBreeder now supports linking both your random devices to the extremely fast alternative - Frandom ( http://billauer.co.il/frandom.html ). This module is orders of magnitude (10-50 times) faster than the standard character devices ( Check this out - http://forum.xda-developers.com/show...&postcount=134 ). The erandom character device also installed by Frandom doesn't use up system entropy at all on top of being fast. You will need to ask your ROM developer to develop the kernel module for you and then place it in /system/lib/modules. CrossBreeder will then try and load it and if successful, make all the necessary adjustments so that both /dev/random and /dev/urandom are pointing to /dev/frandom and /dev/erandom respectively. The speed benefits are to be seen to be believed. But since each ROM requires a unique kernel module, this option is left optional ( but auto detect ). Advanced users can even try and load the frandom module built for other kernels if they don't have one readily available for their own kernel version using the Punchmod utility. Read this: http://forum.xda-developers.com/show...5#post41920265"
Thanks for your time reading
Is this a custom kernel or parts used from mako and that ?
Sent from my LG-LS970 using Tapatalk 4
Is this kernel based on mako or e975 kernel, and does camera work like the stock cm kernel?
Sent from my LG-LS970 using XDA Premium 4 mobile app
Hey man, tried flashing this on top of shelnut's CM 10.2 after wiping dalvik and cache and got stuck at a weird LG boot screen, then the screen and capacitive buttons turned on but it was just a blank black screen. I'm really looking forward to trying this though.
That_Guy0505 said:
Hey man, tried flashing this on top of shelnut's CM 10.2 after wiping dalvik and cache and got stuck at a weird LG boot screen, then the screen and capacitive buttons turned on but it was just a blank black screen. I'm really looking forward to trying this though.
Click to expand...
Click to collapse
Was it two green LG logos over half of a normal one?
VoluntaryMan said:
Was it two green LG logos over half of a normal one?
Click to expand...
Click to collapse
Indeed it was.
I'm going to have to make one from cm sources. This one won't work on cm 10.2 and there kernel Wont work on a pure source 4.3 .... I don't really k ow what's going on with cm .I know they like to have their kernels built with their ROMs. I'm thinking that I will start on a cm kernel tonight after work. This source that I'm using is a caf 2.5 kernel. You all that are using cm will have a kernel tonight
Sent from my LG-LS970 using XDA Premium 4 mobile app
Evolutionmods said:
I'm going to have to make one from cm sources. This one won't work on cm 10.2 and there kernel Wont work on a pure source 4.3 .... I don't really k ow what's going on with cm .I know they like to have their kernels built with their ROMs. I'm thinking that I will start on a cm kernel tonight after work. This source that I'm using is a caf 2.5 kernel. You all that are using cm will have a kernel tonight
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you, sir! Much appreciated!
Ty ... I do know the big problem is our cm is mostly mako with a few tweaks to work on our phone... If we can ever get one the built from source not one put together by bits and pieces that would solve a lot of problems... But please don't get me wrong I do appreciate all the work that is and has been done to even get ports working for us...
Sent from my SPH-L710 using Tapatalk 4
bigfdaddy2 said:
Ty ... I do know the big problem is our cm is mostly mako with a few tweaks to work on our phone... If we can ever get one the built from source not one put together by bits and pieces that would solve a lot of problems... But please don't get me wrong I do appreciate all the work that is and has been done to even get ports working for us...
Sent from my SPH-L710 using Tapatalk 4
Click to expand...
Click to collapse
This kernel isn't based on Mako. It is based on the Qualcomm-made Snapdragon-optimized sources at CodeAurora (their repositories for sharing code with partners and us). That is the same source that manufacturers (such as LG) base their kernels on (even Google does as well, but theirs is not up-to-date and is missing some optimizations).
That_Guy0505 said:
Indeed it was.
Click to expand...
Click to collapse
Sorry about that. LG has a strange initlogo implementation which I haven't quite figured out yet. It only shows for a second so it's not too bad though. If I disable or delete the initlogo, it seems to boot up slower, so that's why it's there.
xboxfanj said:
Sorry about that. LG has a strange initlogo implementation which I haven't quite figured out yet. It only shows for a second so it's not too bad though. If I disable or delete the initlogo, it seems to boot up slower, so that's why it's there.
Click to expand...
Click to collapse
No need to apologize. I understand that things are a work in progress and that bugs need to be worked out. I'm just happy to be running 4.3 lol.
However, I will say that once the weird LG screen went away, my phone would not boot. It would just go to a blank, black screen. The screen was on, and the capacitive buttons were lit up but the screen was just blank.
So if you got it to actually boot up then you got farther than I did!
Sent from my LG-LS970 using XDA Premium 4 mobile app
bigfdaddy2 said:
Ty ... I do know the big problem is our cm is mostly mako with a few tweaks to work on our phone... If we can ever get one the built from source not one put together by bits and pieces that would solve a lot of problems... But please don't get me wrong I do appreciate all the work that is and has been done to even get ports working for us...
Sent from my SPH-L710 using Tapatalk 4
Click to expand...
Click to collapse
its not a problem anymore at all. Shelnutt completely rebased cm10.2 on the rom from e975, so we don't have a mako based rom anymore, its lgog based, which is why camera isn't an issue as much anymore
Thanks for this kernel . what other things do u plan on adding into the kernel?
Sent from my LG-LS970 using Tapatalk 4
hazedabeast said:
Thanks for this kernel . what other things do u plan on adding into the kernel?
Sent from my LG-LS970 using Tapatalk 4
Click to expand...
Click to collapse
I'm thinking block related code. For scheduler improvements. I would rather make stock better. Daily drivers and functionality are priorities for me
Sent from my LG-LS970 using XDA Premium 4 mobile app