Develop Bugs

[MOD][ICS][ROOT] Custom build.prop (based on crossix's mod)

The mods are not mine, I only adapted the [MOD] HC custom build.prop - Updated: 1/29/12 into ICS's build.prop.
Works fine on my A100 running [LEAK][ICS 4.0.3] Acer_AV041_A100_0.009.00_WW_GEN1
Not tested on A101.
Mods (from [MOD] HC custom build.prop - Updated: 1/29/12 ):
A little about the build.prop file and what it does:
Your build.prop file contains a lot of information about your tab. Things like what model, version of android, manufacturer and other info can be found within, but it also can control certain aspects such as display density, wifi scan time and other misc tweaks that improve overall smoothness.
This build.prop file contains the following changes:
# Makes the market and apps think your a100 is really an a500 (letting you find and buy more apps then what you'd normally see in the market)
# Speed up UI (smoother flinging)
# Battery saving tweaks
# Inet optimization tweeks
# Additional tweaks to fine tune the touch screen (still has the double letter issue when typing too fast)
# Additional tweaks to improve battery saving while tablet sleep
# Comments for the various tweaks
# Added settings to improve image quality when taking pictures and recording video and speed up bootimes (just by a few seconds) [thanks to tehgyb of xda]
# Added settings to improve streaming media streaming (improves youtube preformance) [thanks to Icewyng of xda]
# Added settings to improve app compatibility (less fc's) [thanks to Icewyng of xda]
Installation guide (from [MOD] HC custom build.prop - Updated: 1/29/12 ):
- Open root explorer and navigate to /system and tap the mount r/w button
- Unzip the file and put build.prop in /system (be sure to make a backup copy first!)
- Reboot and watch your tab fly even faster!

Thank you, I plan install ICS, Root and then implement your MOD, the Memory Swap (so I can use my 32GB card instead of the Measly 5GB that Acer provides). Thanks again, I didn't know they limited the Apps on the A100! I'm dealing with that BS on my Prime. It's ludicrous that I can play Modern Combat 3 effortlessly on my G2x, but it's supposedly incompatible with my Prime.....So, I'm thanking you ahead of me even getting my little A100. Hope the best for me!

Any thoughts on if this fixes the digitizer issue? I don't have ICS anymore to test. You can test by downloading TouchUtil app and just run your finger across the screen and see if it'll skip. This was one reason I went back to HC with crossix original build.prop mod.
Here was the original issue with HC but was fixed with crossix build.prop mod
http://www.youtube.com/watch?v=YrDXfj6TchM&list=UUHqepxR6_suYYKySqKxymDg&index=16&feature=plcp

This didn't work for me. After installing my tab went into an infinite reboot and I had to go into recovery and restore back to defaults. When I was using HC I was using Crossix's mod and never had a problem with that.

Worked fine for me. However the touch screen is still a bit wonky
Sent from my HTC Glacier using Tapatalk

Is there any changes in the stock 009 build and the stock 012 build (build.prop files)?
The touch screen does seem to be better in the latest leak. But it might have been the Acer Liquid app.
Sent from my SGH-I897 using xda premium

Google play still recognise it as A100 using using ICS .012
Sent from my A100 using Tapatalk

levaman said:
Google play still recognise it as A100 using using ICS .012
Sent from my A100 using Tapatalk
Click to expand...
Click to collapse
Did you reboot?

same problem here, market isn't showing all apps. I rebooted, but the gameloft games still don't show up. Order and Chaos, the only game i play, is now unattainable. Thanks

If you guys are still having issue with market you can try this mod and just edit the lines yourself.
http://forum.xda-developers.com/showthread.php?t=1525964
OP I noticed you didnt change any of the build.description and build fingerprint line to a500.

aznmode said:
If you guys are still having issue with market you can try this mod and just edit the lines yourself.
http://forum.xda-developers.com/showthread.php?t=1525964
OP I noticed you didnt change any of the build.description and build fingerprint line to a500.
Click to expand...
Click to collapse
That is what caused the apps not to appear in the market with the build.prop in the OP. I edited it for those who want it (It's attached). Now all games and apps are available (at least the ones which I got with crossix's original one ). It's based on the 1.012.00 release.
NB: Do not extract it. Just remove the "zip" file extension.
Credits:
- crossix
- aznmode

Theonew said:
That is what caused the apps not to appear in the market with the build.prop in the OP. I edited it for those who want it (It's attached). Now all games and apps are available (at least the ones which I got with crossix's original one ). It's based on the 1.012.00 release.
NB: Do not extract it. Just remove the "zip" file extension.
Credits:
- crossix
- aznmode
Click to expand...
Click to collapse
My A100 doesn't even boot now after using this build.prop...something might be wrong

Did not help. Still can't find order and chaos
Sent from my A500 using xda premium

Does the XDA Premium HD app show in the market for anyone? I know I bought it in my tab when I was on honeycomb but now its gone too.
Sent from my SGH-I897 using xda premium

levaman said:
My A100 doesn't even boot now after using this build.prop...something might be wrong
Click to expand...
Click to collapse
Make sure you are running the .12 leak. It's working perfectly here. Did you remove the ".zip" file extension?
masterpker2 said:
Did not help. Still can't find order and chaos
Sent from my A500 using xda premium
Click to expand...
Click to collapse
It shows up fine in my market. It's the first result when I search for it. I could even make a screenshot if you like .
Joecascio2000 said:
Does the XDA Premium HD app show in the market for anyone? I know I bought it in my tab when I was on honeycomb but now its gone too.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
No, it still does not show up in the market. Good thing I made a backup .

It found all the gameloft games on mine after I manually edited the lines. The market O&C doesn't work for me now though, I installed it via the apk a while back and somehow made my market think it was purchased from there, but when I try to install from the market, it just hangs at starting download. I bought it from gameloft's site, so I can just email them for a copy of the apk.
Sent from my A500 using Tapatalk

bjones72751 said:
It found all the gameloft games on mine after I manually edited the lines. The market O&C doesn't work for me now though, I installed it via the apk a while back and somehow made my market think it was purchased from there, but when I try to install from the market, it just hangs at starting download. I bought it from gameloft's site, so I can just email them for a copy of the apk.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
I had to install an older version of Order and Chaos (which I backed-up), download the additional data, then update it for it to work.

can i use this Build.prop with Flexreapers A500 ?

Raul77 said:
can i use this Build.prop with Flexreapers A500 ?
Click to expand...
Click to collapse
You could give it a try but the Acer ring won't work if you do (assuming it boots).

Theonew said:
Make sure you are running the .12 leak. It's working perfectly here. Did you remove the ".zip" file extension?
Oh sure I did all that, but maybe it has something to do with the fact that my tablet its encrypted??!! Not a big deal Judy had to go through the installation and rotting again, will see what it happens after I decrypt it.
Sent from my A100 using Tapatalk
Click to expand...
Click to collapse

[R0M] Unofficial kang from Whitehawk's 7/15 AOKP ICS

Fully loaded (Sweet and right to the point) Whitehawk ICS 7/15 Kang [Don't forget to flash TDJ venom kernel]
*** Features ***
Sony Walkman Player with Visualizer
AwesomeBeatsV3 Equalizer
OC'able to 1.836 by flashing TDJ's Venom Kernel (Highly recommended, thanks TDJ!)
Thanks to venom kernel, we have badass govenor, and sio cpu scheduler
Extra build.prop tweaks were added since the previous release to help with even better battery (New as of 10/15/2012)
GPS.conf and SuplCert are /system/etc for faster lock-on (aGPS patch thanks to crypted!)
Hosts file allows blocking of dangerous and risky advertisements and websites
Removed AOKP Wallpapers + Pico_TTS foriegn language files for a slightly slimmer ROM (Kept livewallpaper support) (New as of 10/15/2012)
Default launcher is Nova Launcher 1.3.1
Gallery3D removed
Quickpic is included as image viewer and video viewer
Pre-supercharged
CPUSleeper.apk included for much better battery life (Thank you very much Eugene!!)
HTMLViewer.apk removed (New as of 10/15/2012)
Music Searcher app included
Solid Explorer as default file explorer
Deleted most ringtones, notifications, alarms but kept one of each. Add your own with Zedge from the Market (New as of 10/15/2012)
Files in Video folder in media have been removed.(New as of 10/15/2012)
Logcat disabled, it's not like we are experiencing SOD/RR with this (New as of 10/15/2012)
Added tweaks in build.prop for better call quality, and connection (New as of 10/15/2012)
New file size : 113.44 MB
Bugs : Speaker phone fades in and out and becomes choppy (if this affects you directly, please use a different ROM!)
Please note : This is soon to become my daily driver, just can't flash it as soon as I would like to. (Again, I don't post anything I'm not willing to DD)
If there's any problem booting, let me know. Slimlining a ROM can do that sometimes if I accidentally removed the wrong file.
Venom Kernel
GAPPS ICS 2012-04-29
October 15th AOKP ICS 7/15 Whitehawk kang

wow! me me me lol

Tested and working well.

Best Best!!!!
Inviato dal mio GT540 con Tapatalk 2

Interesting concept this whole stripped ROM thing. I like it. I'll have to give this a go. :good:
Heh, guess this comment is a little out of place now that you modified the thread. Glad to see you back tls.

bobpantsspongesquare said:
Interesting concept this whole stripped ROM thing. I like it. I'll have to give this a go. :good:
Click to expand...
Click to collapse
Thanks. I ran it, was interesting. Its a fast DIY ROM thats as much as I can say about it.
Sent from my SGH-T989 using xda app-developers app

As I mentioned in the stripped down AOKP thread I like the less fat versions as well. I have been doing this to my roms for quite some time but I do believe to simply save yourself as an OP some time it would be easier and faster overall to develop script to remove the files.
I have attached a copy of what I use after every flash and it takes out a lot from CM10 since I use mostly my own notifications and ringtones. Feel free to manipulate how you like and use. Its no more that 5 seconds to run after you have flashed everything...
Like I said feel free to check it out I found it and fixed it to my needs and its been working for me. Not to knock your hustle just know how much of a pain it was for me to delete stuff after every update

playya said:
As I mentioned in the stripped down AOKP thread I like the less fat versions as well. I have been doing this to my roms for quite some time but I do believe to simply save yourself as an OP some time it would be easier and faster overall to develop script to remove the files.
I have attached a copy of what I use after every flash and it takes out a lot from CM10 since I use mostly my own notifications and ringtones. Feel free to manipulate how you like and use. Its no more that 5 seconds to run after you have flashed everything...
Like I said feel free to check it out I found it and fixed it to my needs and its been working for me. Not to knock your hustle just know how much of a pain it was for me to delete stuff after every update
Click to expand...
Click to collapse
Thank you. Very much appreciated. I however for some reason love doing it by hand it assures I know everything I need and want is removed. Besides, my slim fast build has tweaks and /etc/ mods.
Sent from my SGH-T989 using xda app-developers app

Were did your kang roms go? I just flashed the sonyblaze and cant find it .btw love it.
Sent from my SGH-T989 using Xparent SkyBlue Tapatalk 2

jlg19753 said:
Were did your roms go? I just flashed the sonyblaze and cant find it .btw love it.
Sent from my SGH-T989 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
Thanks. Sorry, all kangs were discontinued directly by me due to the flaming on here even after I directly stated multiple times I was NOT a developer just putting together pieces of a puzzle to make the good ROMs even better.

That's messed up . Don't let these kids discourage u! U done a great job and give credit were it was due. Lost for words now.
Sent from my SGH-T989 using Xparent SkyBlue Tapatalk 2

I'm not discouraged but I thank you. That one user made a good point though. Im no developer and I will not be held reliable for driving one away.
Sent from my SGH-T989 using xda app-developers app

That sucks! Don't go out like that! Not over someone's opinion that doesn't really matter!
Sent from my SGH-T989 using xda premium

Ummm. Did I miss something? What happened to his nightly?
Sent from my SGH-T989 using xda app-developers app

Bro in this world even way back people got hates as long as they don't touch your grass u don't got to blast their ass just slow down and make a List of names
Sent from my SGH-T989 using xda app-developers app

TheLastSidekick said:
Thanks. Sorry, all kangs were discontinued directly by me due to the flaming on here even after I directly stated multiple times I was NOT a developer just putting together pieces of a puzzle to make the good ROMs even better.
Click to expand...
Click to collapse
Aw, don't get discouraged man. I'm sure tons of people really appreciated what you done for the community. Can't let the dbags get to you.
Sent from my LG-P999 using xda premium

Keep on kanging!
Sent from my SGH-T989 using xda premium

It's open source for a reason my man. Unless Whitehawkx or someone from Team Kang or the CM team contact you, I'd keep going. You've done nothing wrong and a whole lot of good.

TLS, there is a PM in your box when you get a chance.
Kent
Sent from my SGH-T989 using xda app-developers app

what the deuce .... I Kant find any sidekick ROMs what happen... running cyanogen 10 mod. And its awesome. ...
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

CM10 PHABLET UI build.prop

Here's the phablet UI build.prop. use root browser or etc to put this in /system
Link
https://www.box.com/shared/0v4dv8v0dkzrv3lf70kh
Sent from my A100 using xda premium

das_webos_transformer said:
Here's the phablet UI build.prop. use root browser or etc to put this in /system
Sent from my A100 using xda premium
Click to expand...
Click to collapse
Where? Its majik!
Sent from my LG-P999 using xda premium

Had to get link, holy crap chill out!
Sent from my A100 using xda premium

das_webos_transformer said:
Had to get link, holy crap chill out!
Sent from my A100 using xda premium
Click to expand...
Click to collapse
I was jokin with ya!!
I saw it and was like oooooh i get to quote it!! Lol
Sent from my LG-P999 using xda premium

Lol.... gotta love that stuff!
sent from my Banana phone S 4G

"The user hosting this content is out of bandwidth."
Any chance to upload it to another service? Thanks!

argh
"The user hosting this content is out of bandwidth."
on a 2k file
can u give us an alternate link....and possibly some more details about the changes?
does it still retain the tablet DPI?

Its a switch wds built in, DPI remains 160 however the ui will be either tablet or phablet depending if this line is there or blocked. It doesn't mess with anything else. Its the alternative he came up with vs my forcing one or then other in source (dirty but effective) or jacking with DPI (dirty and breaks stuff).
Sent from my Galaxy Nexus using Tapatalk 2

alexdog69 said:
argh
"The user hosting this content is out of bandwidth."
on a 2k file
can u give us an alternate link....and possibly some more details about the changes?
does it still retain the tablet DPI?
Click to expand...
Click to collapse
Linuxsociety's build props were made before the tablet ui tweak was put in place. So if you use one of those for 4.1.1 jb, it will put it back to phablet ui.
http://forum.xda-developers.com/showthread.php?t=1799148
Or if you use any wds cm10 build before 9.02.12, as that is the only one that has tablet ui forced.

Romman0 said:
Linuxsociety's build props were made before the tablet ui tweak was put in place. So if you use one of those for 4.1.1 jb, it will put it back to phablet ui.
http://forum.xda-developers.com/showthread.php?t=1799148
Or if you use any wds cm10 build before 9.02.12, as that is the only one that has tablet ui forced.
Click to expand...
Click to collapse
Wds never forced it, they always had phablet ui, my builds forced it, and I told Linux how so his likely were as well, I also gave him the mem Bar as I had intended to stop building and let him carry it on.
The only wds builds to have tablet ui are the builds with that switch in build.prop, which I think was his last build.
Tapatalked from my Nexus 7 - Kuroikaze AOSP

pio_masaki said:
Wds never forced it, they always had phablet ui, my builds forced it, and I told Linux how so his likely were as well, I also gave him the mem Bar as I had intended to stop building and let him carry it on.
The only wds builds to have tablet ui are the builds with that switch in build.prop, which I think was his last build.
Tapatalked from my Nexus 7 - Kuroikaze AOSP
Click to expand...
Click to collapse
i feel like phablet takes up more screen, and i like the tablet notification bar setup.
Iconia A100 CM10 PRIVATE BUILD, TabletUI, Updated to 11/03/12 Source; godmachine v2.0 kernel

You guys can feel free to edit one line of the build.prop yourself.
sent from my Banana phone S 4G

Apparently it's as simple as ro.sys.tabletui = 0
Sent from my A100 using xda premium

alexdog69 said:
Apparently it's as simple as ro.sys.tabletui = 0
Click to expand...
Click to collapse
I got it set, but I don't see much difference. What is it supposed to accomplish again? =)

ssjtoma said:
I got it set, but I don't see much difference. What is it supposed to accomplish again? =)
Click to expand...
Click to collapse
The AR-15 is a lightweight, 5.56 mm, magazine-fed, semi-automatic rifle, with a rotating-lock bolt, actuated by direct impingement gas operation or long/short stroke piston operation. It is manufactured with the extensive use of aluminum alloys and synthetic materials.
Hope that helps!
G2x-temasek CM7 build135.3 w/faux 054 kernel

justjackyl said:
The AR-15 is a lightweight, 5.56 mm, magazine-fed, semi-automatic rifle, with a rotating-lock bolt, actuated by direct impingement gas operation or long/short stroke piston operation. It is manufactured with the extensive use of aluminum alloys and synthetic materials.
Hope that helps!
G2x-temasek CM7 build135.3 w/faux 054 kernel
Click to expand...
Click to collapse
Ummm. Lol
ssjtoma said:
I got it set, but I don't see much difference. What is it supposed to accomplish again? =)
Click to expand...
Click to collapse
It just changes the ui. It will add the notification area to the top and nav buttons in the center bottom, ala nexus 7.
It supposedly increases app capatibility for phone apps. But most apps work on tablet ui just fine.

I've actually had some games that run on my G2x, but when on my tablet in phabui game crashes, switch to tabui and they will run.
And I have yet to run into a game that runs in a vice versa situation.
I just leave build.prop in tabui.
G2x-temasek CM7 build135.4 w/faux 054 kernel

GloryROM (Base on V20С EU O2)

Hi! I know many people using STOK ROMs because its stable.
So I just did little MOD of stok ROM every day use.
Features:
- Removed SW SecurityLock. So you never dont see "Security Error". Now you can do with ROM everything, can remove difference apps, modify apps, framework, do difference soft-mod and other.... ;
- Deleted old GAps, and added new;
- Deleted trash apps;
- Soft-touch touchscreen;
- Added support for init.d script;
- Added init.local.rc, in userspace, now you can add different service and change parameters for example SDCard cache (1mb now) or turn-on/off. KSM, and other;
- Rework STOK kernel, base on sources P930 (AT&T):
- minimum no needed path only system optimizations;
- few new shedulers;
- few new governos;
- reduced power consumption;
- turn-on SWAP, if you need it I can give script for it;
- turn-on KSM;
- turn-on zRAM and other stuff;
- Default frequency - 1 512mhz;
- Default shedulers - dead-line;
- Default governos - performans;
- Added LG-LED-notifications and IME from 4.1, superuser and other.
No modem inside, use it what you like, I am using 20f.
Download:
http://dfiles.ru/files/j7msfxxxo
my device on 1512 in Antitu show me OVER 8100.

coming from you, at least it is worth to try it. downloading now. if its enough fast for me, i might use it as daily driver. cm9 and cm10 still have serious issues with random reboots and BSODs. i have been with your CM10 almost since day 1, great rom besides the battery drain.

Very fast, but incompatible with Wind-Kernel 3.0.
Sent from my LG-P930 using xda premium

abc001 said:
Very fast, but incompatible with Wind-Kernel 3.0.
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
You dont need it. Current kernel is not worse then Wind-Kernel!
Later I will make CrazyKernel for it with CPU O/C and real GPU O/C. Our Andreno 220 have 266mhz by default. I can increase it to 400mhz - its maximum for Andreno 220. But Kernel will have very small battery life. So need choose for what you need ROM, for every day using or just for playing games with charger.

Just report. I am comfortable with the good battery life. Thank you.

Baseband
So this rom is based on v20 .... can i still run it and have signals under v10 ?

rom pretty stable, just like stock is. dunno if it has only happened to me but stock lg roms seem to have less sensitive digitizer. HO!NO!'s v20 and att stock is same, just like this one.
overall the rom is great besides the common "lag" on lg stock roms for this device.

el_venga
open RootExplorer
system\usr\idc\touch_dev.idc
or in other ROMs it can be system\usr\idc\synaptics_ts.idc
edit file:
touch.size.scale = ??? - find you digit what you like
and
touch.pressure.scale = ??? find you digit what you like

Thanks for making this rom, do I have to unbrick first, since this is based on stock rom?

debugger919 said:
Thanks for making this rom, do I have to unbrick first, since this is based on stock rom?
Click to expand...
Click to collapse
If you are under sotck ICS, yes you have to use an unbrick method to get back to GingerBread since when LG rolled out the ICS update, it locked the bootloader as well. I also did that and it works, i used heretics unbrick method, very easy if you follow the step accordingly.

I've been using GloryROM since shortly after it was posted. So far, it's been very stable with excellent battery life. I installed by "dirty flashing" over HO!NO! P930 Bell Official V20f. I'm very happy with it and plan on sticking with this ROM for awhile. Loving the stability! :good:

Did the touch screen modification and I feel it better, although could be placebo effect. Btw awesome battery life. I'm still on 70% with my regular use in about 12 hours. By this time I was usually about 40%.
Sent from my LG-P930 using xda premium

It seems that it cannot pair BT. Am I alone?

I tried today to pair with my BT radio in the car and couldn't do it. Maybe it's the phone.
Sent from my Galaxy Nexus using Tapatalk 2

abc001 said:
It seems that it cannot pair BT. Am I alone?
Click to expand...
Click to collapse
+1
Sent from my LG-P930 using xda app-developers app

Has anyone got BT and Camera workong properly?
Sent from my LG-P936 using xda premium

OKAY I am stumped.... Where did the text-to-Speech settings go? The only thing under language and input is keyboard??
Sent from my LG-P930 using xda app-developers app

Same here Buletooth & text-to-Speech cannot work in this rom
But this rom is already better than stock rom, it is greatfull and hope will fix soon
:good:

I did not realised the Bluetooth issue until today. Waiting for a fix. I might go to cm10 until then.
Sent from my LG-P930 using xda premium

just1nsama said:
If you are under sotck ICS, yes you have to use an unbrick method to get back to GingerBread since when LG rolled out the ICS update, it locked the bootloader as well. I also did that and it works, i used heretics unbrick method, very easy if you follow the step accordingly.
Click to expand...
Click to collapse
I had stock GB rooted, got CWM working and can't boot HONOS stock ICS (because I haven't unbricked?), will this ROM work without unbricking in my case?

[KERNEL][ALPHA][STOCK/CROMI] JB 4.2 ★ Hundsbuah ★ 10.6.1.8.4 ★ TF300T Base

[KERNEL][ALPHA][STOCK/CROMI] JB 4.2 ★ Hundsbuah ★ 10.6.1.8.4 ★ TF300T Base
Thanks to: _that, sbdags, steveman29 and all testers out here
If you like my work you can donate by clicking the link below:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=BGD8ETXAPXNEQ
Please tell me your xda nickname in the donation!
Donators: steveman29, bads3ctor, Douglas Wing, pastorbob62, Yamir Gonzalez, ziggy71
Hi guys,
as you asked so often if i can make the tf700t kernel also for tf300t users, ill try to merge all oc settings done now for the working tf700t also for the tf300t, including the kind of limiting the frequencies as it is possible with the tf700t version of my kernel right now (via app and terminal)
we have to manage following steps and i need the help of the community. i dont own a tf300t device, so i need testers who can test my new testkernels on a tf300t devices.
following steps have to be done:
- the first step is to get the kernel working on a tf300t device without oc [DONE]
- next step will be to overclock the tf300t device staticly [DONE]
- the last step will be to offer a runtime limiting of the cpu and gpu frequencies as it is possible with the tf700t kernel right now. the difficulty is to differ between the different devices in the kernel code (it is a kernel for 2 different devices, yes both are tegra3, but not the same hardware) [DONE as based of tf300t kernel sources]
HEY, we made some good progress until now
what you will have at the end?
a (i hope so ^^) working tf300t kernel where you can choose during runtime which oc'ed frequencies you want to run on your cpu and gpu. [DONE]
Need help - Still something unclear?: THX lucius.zen
http://forum.xda-developers.com/showthread.php?t=2232715
My App to Limit CPU and GPU Frequencies:
v1.5
- fixed double warning if no hundsbuah kernel is used
- added feature to store cpu settings to asus power modes
- added feature to store gpu settings to asus power modes
- fixed app force close when trying to save to an asus powermode (please report if its really gone )
- have fun
http://www.mediafire.com/download/18adjqe710y394c/HundsbuahsKernelTweaksv1.5.apk
v1.61beta
- autoload on page load
- removed asus keyword from buttons and labels to fix display issue on smaller screens
http://www.multiupload.nl/XPIIIIVG38
Testkernel (20130521)v11 - TF300T BASE:(Please activate init.d support with pimp my rom app)
- little bit higher voltages for all cpu revisions and 1600mhz+ (try if its better now)
http://www.mediafire.com/?5mr686tby6zxsi8
Data2SD Patch for v7 and newer!:
Just flash it in twrp after you have flashed the kernel. thats all. your sdcard needs a 2nd partition with ext2 or ext4 with (windows: active, linux: boot) flag set
http://www21.zippyshare.com/v/49688197/file.html
Thank you all for your help!
Source:
https://github.com/Hundsbuah/tf300t_10_6_1_8_4
Tf700T Thread:
http://forum.xda-developers.com/showthread.php?t=2143093

Hi mate,this kernel boots just fine but it's having the same display issue as the first kernel for the tf700t (remember?heavy screen tearing and flickering when touching the screen).Otherwise wi-fi seems to work and the OS loads just fine.Here's a logcat,maybe it will be useful:
Edit:Here's a second logcat

Pretoriano80 said:
Hi mate,this kernel boots just fine but it's having the same display issue as the first kernel for the tf700t (remember?heavy screen tearing and flickering when touching the screen).Otherwise wi-fi seems to work and the OS loads just fine.Here's a logcat,maybe it will be useful:
Click to expand...
Click to collapse
great, but no bootloop or restart? just screen flashing/flickering?

Hundsbuah said:
great, but no bootloop or restart? just screen flashing/flickering?
Click to expand...
Click to collapse
No bootloop or restart .
BTW,i also uploaded a second logcat to the previous post .

So excited!!!
Sent from my Incredible 2 using xda app-developers app

Pretoriano80 said:
No bootloop or restart .
BTW,i also uploaded a second logcat to the previous post .
Click to expand...
Click to collapse
ok maybe its caused by the mixture of the tf700t and tf300t ramdisk, im currently uploading a kernel with an original tf300t asus ramdisk.
hope that helps ill post the new testkernel as v2 in the op.
thx so for for testing!! :good:

Pretoriano80 said:
No bootloop or restart .
BTW,i also uploaded a second logcat to the previous post .
Click to expand...
Click to collapse
btw: what are the stock cpu and gpu speeds of a tf300t?
cpu 1300mhz and gpu 416mhz?

Hundsbuah said:
ok maybe its caused by the mixture of the tf700t and tf300t ramdisk, im currently uploading a kernel with an original tf300t asus ramdisk.
hope that helps ill post the new testkernel as v2 in the op.
thx so for for testing!! :good:
Click to expand...
Click to collapse
Thanks for all your dedication man!
I flashed and got a booting device!
However, HORRIBLE lag, and insane screen glitches. I grabbed a last_kmsg for you.
http://www.mediafire.com/?v0yc7kpy6bdy1my
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2

When this gets a little more stable I will start testing. I would start now but need my tablet woking for the next few hours.

elesbb said:
Thanks for all your dedication man!
I flashed and got a booting device!
However, HORRIBLE lag, and insane screen glitches. I grabbed a last_kmsg for you.
http://www.mediafire.com/?v0yc7kpy6bdy1my
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
that was the last_kmsg from the recovery. you must restart 1x to get my kernel last_kmsg
/edit: what version was this? v1 or v2?

Hundsbuah said:
that was the last_kmsg from the recovery. you must restart 1x to get my kernel last_kmsg
/edit: what version was this? v1 or v2?
Click to expand...
Click to collapse
Version one. Just saw version 2 now. And i thought i did. must have not overwrote it. Sorrry. Flashing version two now.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2

Same graphical issues with v2 too.Here's the last_kmsg:

Pretoriano80 said:
Same graphical issues with v2 too.Here's the last_kmsg:
Click to expand...
Click to collapse
Same thing for me. Here is my last_kmsg. Now i flashed, booted once, rebooted, grabed the last_kmsg but its 0 bytes?
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2

No 3.0.3 test kernel link
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
---------- Post added at 08:22 PM ---------- Previous post was at 07:47 PM ----------
Goddly said:
No 3.0.3 test kernel link
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
Click to expand...
Click to collapse
Btw we desperately needed a dev for kernels for the 300 , especially because there is none for 4.2. Oh btw your kernel, modded by sbdags 1.3-1.8 on 4.1 was my favorite by far
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD

I actually run one of your older kernels on my TF300. Its the V1.4.4 for your TF700 and I have never had a problem with it. The front camera works. The OC works to 1.8GHZ and it gets me the best benchmarks I've ever gotten on this guy. I've tried newer versions of your TF700 kernel and they all seem to work too, except for the OC.

hardslog said:
I actually run one of your older kernels on my TF300. Its the V1.4.4 for your TF700 and I have never had a problem with it. The front camera works. The OC works to 1.8GHZ and it gets me the best benchmarks I've ever gotten on this guy. I've tried newer versions of your TF700 kernel and they all seem to work too, except for the OC.
Click to expand...
Click to collapse
On 4.2.1?
Sent from my Incredible 2 using xda app-developers app

I'm so happy you will help us!! We so desperately need a kernel.. Thanks a lot!

d08speed3 said:
On 4.2.1?
Sent from my Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
No, sorry on 4.1.1

joelalmeidaptg said:
I'm so happy you will help us!! We so desperately need a kernel.. Thanks a lot!
Click to expand...
Click to collapse
+1
Enviado desde mi ASUS Transformer Pad TF300T usando Tapatalk 2

i am away from making a tf300t kernel on tf700t base.
i merged all my oc settings to a clean tf300t asus base.
im currently uploading the new testkernelv4.
ill post it as always in the op.
cpu oc: 1500mhz
gpu oc: 520mhz
please report