[Kernel][TMO/ATT][4.1.X][TW]✫★✫KINETIC PULSE KERNEL™ ✫★✫ May 14, 2013
KINETIC PULSE KERNEL™
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This kernel is only for TW 4.1.x T-mobile/Att ROMS/devices at this time. Enjoy!
More info on Kernel Governors, Modules, I/O Schedulers and CPU Tweaks Check out this thread
Great widget to control fast charge Fast charge widget ply store link
Also another must have app! Full control over your phone and kernel for free! Trickster Mod Kernel settings
What is fast charge:
This allows one to force AC charging for any charger that is detected as USB (e.g. many car chargers) and pull the full current the charger can support. Without Fast charge, when connected to the computer or even car charger you will very low current causing the charge time to be a lot longer. With fast charge active the current is set to the max allowed (and/or safest) and charging time will reduce greatly. It also provides additional security when connecting to public charging stations because by forcing AC charging, USB/adb data transfers are disabled, protecting your data. When fast charge is active you will not be able to access your data on your device. You will need to turn fast charge off to access them. Hope this helps everyone understand it more.
How to install:
Flash the kernel
Clear cache and dalvik cache.
Reboot
Big thanks goes out to:
TDJ
Faux123
ktoonsez
ptmr3
Code:
V1.4 - May 14, 2013
- lowered min to 192
- cleaned up some
- removed problem governors until I can patch them
- should support 64gig SD cards now. Please confirm.
v1.3 - April 29, 2013
- disabled Ondemandx and Scary until work out issues with them not playing nice with UKSM
- tweaked brazilianwax and pegasusq, should be rock solid now.... maybe.
- added BFQ Scheduler
* block: prepare I/O context code for BFQ-v4 for 3.0
* block: cgroups, kconfig, build bits for BFQ-v4-3.0
* block: introduce the BFQ-v4 I/O sched for 3.0
* bfq: prevent aliased requests from starving I/O
- msm: hotplug: Support cpu hotplug in no PM cases
- d2: Increase size of ION AUDIO carveout to 5MB TMO/ATT only
- cleaned up a few things as well
V1.2 - April 26, 2013
- Add UKSM 0.1.2
- UKSM: Upgrade to 0.1.2.2
- mm: optimize Kernel Samepage Merging(KSM)
- By default, the wifi chip disabled packet filters when phone is out of
- M2: otg: fix runaway wakelock
- cpufreq: Make sure user_policy min/max get written
- cpufreq: Make sure max is NOT set while booting
- Scheduler screen OFF profile: Added in save values to all schedulers …
- Linux 3.0.67
- Linux 3.0.68
- Trinity colors Morfic: Add toggle to enable/disable Trinity colors
How to set it navigate to /sys/devices/virtual/sec/tsp/trinity_colors
1 = on
0 = off
reboot required.
Huge thanks to ktoonsez on these!!
[b]Edit: See bugs in 3rd post...[/b]
V1.1 - April 21, 2013
- activated OC
- activated Faux sound support
- clean a few things up in the build
- also made a non overclocked version
v1.0 - April 21, 2013
- Linux 3.0.66 Kernel
- Adreno 2xx GPU overclocking to 480 MHz
- CPU overclocking up to 1.836 GHz (nt active in v1.0)
- Undervolted
- User voltage control
- Trinity colors
- Faux sound controller support [URL="https://play.google.com/store/apps/details?id=com.teamkang.fauxsound&hl=en"]PlayStore link[/URL]
- added fast charge support (need an app to turn it on)
- init.d support
- unsecure
- My bootanimation mod to add custom bootanimation support
Governors:
brazilianwax
interactivex
lazy
lulzactive
minmax
ondemandx [removed for now]
savagedzen
scary [removed for now]
smartass
lionheart
wheatley
SmartassV2
Intellidemand
Lagfree
pegasusq
Schedulers:
CFQ
Deadline
Noop
ROW
SIO
v(r)
FIFO
Zen
BFQ
My Github / source - Link
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
By using the kernel you agree with the above terms!
1.4 - http://d-h.st/users/Jamison904/?fld_id=15875#files
Download Folder
Mirror Download Folder
Download key:
KINETIC_PULSE.v1.1.zip - Infamous kernel splash screen and overclocked
KINETIC_PULSE_NO.v1.1.zip - Infmaous kernel splash screen but not overclocked
KINETIC_PULSE_S.v1.1.zip - Stock kernel splash screen and overclocked
KINETIC_PULSE_SNO.v1.1.zip - Stock kernel splash screen but not overclocked
KINETIC_NOOC_Noboot.v1.1.zip - Stock kernel splash screen, stock Samsung boot animation, not cover-clocked
KINETIC_OC_noboot.v1.1.zip - Stock kernel splash screen, stock Samsung boot animation, overclocked
Code:
- none at this time.
The Beast is awaken. Thanks Jamison.
Sent from my wife's house.
Man you're fast!
Sent from my dark hole called an office.
Thank you James!
Sent from my SGH-T999 using xda premium
Awesome work Jamison super fast out of the gate, no crashes, no reboots, Incredible, thanks for your awesome work, will report back in a day or two with battery stats, Talk about being on point........View attachment 1904441
All these incredible tweaks for the GS3.... Amazing
Can att user use this kernel
Sent from my Nexus 7 using xda app-developers app
It is the same source for tmo and att so should be good to go. Let me go check to make sure the blocks/partitions are the same (I think they are, just haven't made a kernel for att before so I want to be 100% sure... don't need any bricks.) I'll check and let you know.
Edit: yes you will be good.
Sent from my dark hole called an office.
So this is only compatible with tw 4.1.1. What about tw 4.1.2?
Sent from my SGH-T999 using xda app-developers app
Yeah it will be compatible. I was thinking only of Tmo when I listed that it is only compatible with 4.1.1. I will edit it. Thanks for catching that.
Sent from my dark hole called an office.
Jamison904 said:
Yeah it will be compatible. I was thinking only of Tmo when I listed that it is only compatible with 4.1.1. I will edit it. Thanks for catching that.
Sent from my dark hole called an office.
Click to expand...
Click to collapse
Ran it on 4.1.2 runs good
Sent from my SGH-T999 using xda premium
Great Kernel here DEV... Been running it since last eve and all is Great even battery seems really good. Color is bright and crisp....
THANKS AGAIN ....:good:
Are there any significant upgrades in this kernel? I'm wanting better battery life.
Sent using T999 with DarthStalker ROM
Significant upgrades compared to what exactly? There are many "upgrades" and a huge amount of governors and a good amount of schedulers. I am not sure exactly what you mean but if you want a more exact on all the changes you can check out the commit history for this kernel on my git hub. Link is in the OP. Look for the project T999_TW_kernel. The kernel is only 4 days old with 70+ commits and many more coming. Also if you want to see about the amazing battery, you can check the last 10 pages of my Infamous S3 ROM thread to see the feed back from all my awesome users! Check if out and flash it. You won't look back.
Sent from my dark hole called an office.
Jamison904 said:
Significant upgrades compared to what exactly? There are many "upgrades" and a huge amount of governors and a good amount of schedulers. I am not sure exactly what you mean but if you want a more exact on all the changes you can check out the commit history for this kernel on my git hub. Link is in the OP. Look for the project T999_TW_kernel. The kernel is only 4 days old with 70+ commits and many more coming. Also if you want to see about the amazing battery, you can check the last 10 pages of my Infamous S3 ROM thread to see the feed back from all my awesome users! Check if out and flash it. You won't look back.
Sent from my dark hole called an office.
Click to expand...
Click to collapse
Oh yeah, I flashed it already :thumbup:
I'm not experienced in kernels... And I flashes the OC'd v1.1, my AnTuTu score jumped about 1000 points. And I'll have to wait and see about battery life.
I also downloaded the Forced Fast Charging app and I'll play with it tomorrow.
And to be extra clear, I meant absolutely no offense or disrespect. I have a great deal of respect for all you devs who freely dedicate your time and effort into these ROMs, Kernels and projects. Being new to kernel flashing, I just wasn't sure what to "look for"... And I didn't want to miss out on anything :beer:
Sent using T999 with DarthStalker ROM
Is the base for the kernel LJA or LJC?
Jamison904 said:
Significant upgrades compared to what exactly? There are many "upgrades" and a huge amount of governors and a good amount of schedulers. I am not sure exactly what you mean but if you want a more exact on all the changes you can check out the commit history for this kernel on my git hub. Link is in the OP. Look for the project T999_TW_kernel. The kernel is only 4 days old with 70+ commits and many more coming. Also if you want to see about the amazing battery, you can check the last 10 pages of my Infamous S3 ROM thread to see the feed back from all my awesome users! Check if out and flash it. You won't look back.
Sent from my dark hole called an office.
Click to expand...
Click to collapse
Thanks for the detailed response. Quick Question: Infamous s3 ROM works with ATT?
This kernel is just awesome I have noticed a big improvement in ny battery and performance thanks for this great work in on tmous goosh rom its like they were made just for each other :thumbup:
Sent from my SGH-T999 using Tapatalk 2
Related
franco.Kernel features:
* I have 1 version for ICS(4.0.3/4.0.4) and one version for JB(4.1/4.1.1/4.1.2). If you ask if it works on older roms I will kick your ass
* Overclockable by tons of frequencies
* Custom Voltage Control from Ezekeel
* Sound Control from Ezekeel/Greg White
* OMAP Gamma interface
* Trinity's Contrast control
* Wifi_PM toggle
* Fsync toggle
* Thermal Throttle toggle
* Debug **** removed
* BFQ v5 IO scheduler by default
* Ramdisk tweaks
* Performance/battery carefully picked tweaks
* Lots more **** - flash and see for yourself
Changelog:
Milestone 6:
* Merged all patches related to 4.1.2
* Fixed the famous data drops by tricking Smartreflex to not overly calibrate certain hardware parts
* Added custom changes to lowmemorykiller driver to force the device to have a certain amount of free RAM to sustain smoothness over the time
* Made the launcher unkillable by the lowmemorykiller driver to prevent redraws or widget crapping itselfs
* Added a new governor called dyninteractive - this is similar to interactive in 99% but instead this new governor dynamically adapts its own tunables and settings depending on the system load.
* Increased Interactive governor kernel priority thread for the frequency change task - more smoothness
* Added a new tuneable for Interactive governor called input_boost_freq. Path is here: /sys/devices/system/cpu/cpufreq/interactive/input_boost_freq
* Added all TCP Congestion algorithms presents in the kernel. To check all algorithms run this command on the Terminal/ADB Shell: sysctl net.ipv4.tcp_available_congestion_control
To change the algorithm: sysctl -w net.ipv4.tcp_congestion_control=NAME_OF_THE_ALGORITHM
* BFQ IO scheduler updated from v4 to v5
* Added other smaller but still relevant changes available on my github repository
F.A.Q:
1. My device rebooted or crashed, how can I help?
A: Get me /proc/last_kmsg or logcat.
2. Battery sucks, my device is not entering deep sleep. FIX PLOX!
A: Fix it yourself, it's an app waking your device up not the kernel's problem
3. Signal is dropping since I flashed the kernel, amg u sucks!
A: The kernel has nothing to do with gsm/cmda signal. Make sure you have the latest radios
4. Do I need to wipe anything when flashing this kernel?
A: No.
5. Does this kernel has X or Y mod?
A: Learn to read, everything you need to know is in the features list, changelog or public repo.
6. GTA3, FIFA2012 or any game of the type isn't opening?
A: Flash this on CWM http://forum.xda-developers.com/showpost.php?p=27515966&postcount=20011
Downloads:
Jelly Bean kernel for 4.1/4.1.1 only:
Nightlies: http://minooch.com/franciscofranco/Galaxy Nexus/JB/Jelly Bean/
Milestone 6: http://minooch.com/franciscofranco/... Bean/milestones/franco.Kernel-Milestone6.zip
Ice Cream Sandwich only:
Milestone 4: http://minooch.com/franciscofranco/Galaxy Nexus/
Nightlies 384Mhz GPU: http://minooch.com/franciscofranco/Galaxy Nexus/nightlies/gpu_384mhz/
Nightlies 512Mhz GPU: http://minooch.com/franciscofranco/Galaxy Nexus/nightlies/
franco.Kernel updater app features:
* Downloads the kernel directly from the ftp
* Checks for updates directly from the ftp
* Checks and downloads Imoseyon's kernel (new feature)
* Kernel auto-flash
* Cpu frequencies changer
* Governor changer
* Voltage control interface
* Kernel settings:
* Hotplug enabler
* Color Control - You're able to change GAMMA values and Color Multipliers to achieve the best color profile
* Sound Control - Increase the max volume of your device
* Download special franco.Kernel boot animation
* Wi-fi special mode to boost signal during streaming while on screen off
* Custom download path
* Live calibrated voltages panel
* Disable logger
* SQlite defrag on boot
* Dedicated milestone and nightly kernels changelogs
My apps list: https://play.google.com/store/apps/...nVsbCxudWxsLDEwMiwic2ltcGxlLnJlYm9vdC5jb20iXQ
Source: https://bitbucket.org/franciscofranco/android-tuna-omap/
Jelly Bean kernel source: https://github.com/franciscofranco/Tuna_JB_pre1/tree/4.1
Have fun.
Just flashed this from the Verizon forums. Works great!!! Thanks!
Sent from my Galaxy Nexus using Tapatalk 2
=] thanks Francisco
Running very fast & smooth on stock.
Oh, snap! The man himself has graced our humble forum Thanks, Franco!
Super excited to be on Franco kernels again
Sent from my Sprint Galaxy Nexus! :-D
thanks a lot man. Love the companion app that goes with it.
Man Things are taking off Thanx I ran your kernels on the NS great to have your support
Awesome and thanks - I found you in the other thread adn flashed your kernel and downloaded the updater ap from market - REALLY COOL stuff - thanks for your efforts.
I cook kernels all the time. And I gotta tell you bro, your kernel and market app together is just epic man. Nightly Eos + Nightly Franco kernel = epic winning.
Can't believe the difference going from stock to milestone 3. Fast, smooth and the increase in battery life is huge. Great kernel and thanks for the work you put into this.
Sent from my Galaxy Nexus using Xparent Red Tapatalk 2
Flashed from stock last night and I'm not noticing quite the difference others seem to be in "smoothness" and battery-life. I do have the Franco app... which governor are yall using? SR/GH settings? Undervolts?
shrumhead said:
Flashed from stock last night and I'm not noticing quite the difference others seem to be in "smoothness" and battery-life. I do have the Franco app... which governor are yall using? SR/GH settings? Undervolts?
Click to expand...
Click to collapse
I'm using lazy governor and generic hotplug. That's made a huge difference for me with screen off. Not as big a difference screen on but we're pushing a lot of pixels on this screen. How was battery life and smoothness for you on stock? On stock my battery life was absolutely horrible even by my ridiculously heavy usage standards. It was pretty smooth on stock for me but smoother with Franco.
Sent from my Galaxy Nexus using Xparent Red Tapatalk 2
bigrushdog said:
I cook kernels all the time. And I gotta tell you bro, your kernel and market app together is just epic man. Nightly Eos + Nightly Franco kernel = epic winning.
Click to expand...
Click to collapse
what governor do you have it set to?
I'm using the conservative governor. Would it be better to use the generic hot plug option or use a profile to switch to the hotplug governor?
Sent from my Galaxy Nexus (Sprint)! :-D
Swede2008 said:
I'm using the conservative governor. Would it be better to use the generic hot plug option or use a profile to switch to the hotplug governor?
Sent from my Galaxy Nexus (Sprint)! :-D
Click to expand...
Click to collapse
If you use the hotplug option you'll still be able to use the conservative governor with the screen off on one core. Use a profile if you want to change governors based on screen on/off. Just don't use the hotplug option with the hotplug governor.
Sent from my Galaxy Nexus using Xparent Red Tapatalk 2
shrumhead said:
Flashed from stock last night and I'm not noticing quite the difference others seem to be in "smoothness" and battery-life. I do have the Franco app... which governor are yall using? SR/GH settings? Undervolts?
Click to expand...
Click to collapse
Give it a few days to notice difference in battery life. Yesterday, battery was pretty much same as stock for me. Today, it's much better. And as the days go by, it will get even better. I left the governor on Interactive, brought the CPU down to 1228MHz, use the Generic Hotplug and turned Logger off. That's my setup for now.
Is the "Battery Life eXtender" in the app similar to SBC? As in I can set it to 100 to get a full battery charge? I used SBC on my og evo for about 9 months with no issues so I'm thinking about putting the setting at 100.
Swede2008 said:
Is the "Battery Life eXtender" in the app similar to SBC? As in I can set it to 100 to get a full battery charge? I used SBC on my og evo for about 9 months with no issues so I'm thinking about putting the setting at 100.
Click to expand...
Click to collapse
It's more like the opposite of SBC. Having your battery fully charged can reduce its life so BLX gives you the option of having it stop charging at a certain point to extend overall life of your battery.
On stock kernel w/ a screentime of about 2hrs I was getting 4-5hrs of battery life.
Day 1 on Milestone3 w/ about 2hrs screentime:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Battery life is improving already =]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi and welcome to fancy kernel. My name is Boy Petersen and I'm building this kernel with the following three main goals: good battery life, reliability and a smooth and snappy user experience.
Feature list:
Based upon:
latest AOSP/CM11 kernel source
selected Cyanogenmod patches
Latest Linux 3.0 version (3.0.101)
selected patches from the device's chipset vendor Texas Instruments
selected patches from Google
selected backport-patches from Linux 3.4
CPU:
CPU frequencies: 224, 384, 537, 729, 1036, 1228, 1344, 1420, 1536 MHz (default on boot: 224 - 1228)
control to set a minimum CPU frequency for screen-on (default: 384 MHz)
Will help with smoothness and responsiveness when you use the phone. When screen is off, however, 224 MHz frequency is used as well.
CPU governors: ondemandplus (more info), interactive (default), ondemand, powersave, performance
ondemandplus is an ondemand- and interactive-based governor that has additional power-saving capabilities while maintaining very snappy performance.
ARM CPU topology: multi-core scheduling (enabled by default; saves battery by scheduling load among the CPU cores; more info)
temperature control
GPU & Display:
GPU frequency control: 307, 384 (default), 512 MHz
color, contrast and gamma contols
sane and natural looking color settings
I/O & memory:
F2FS support
ASRAM memory reclaim, giving you 744mb available RAM with a fully functional device
I/O schedulers: SIOplus (default), deadline, noop, row, bfqv5, cfq
updated HSMMC & OMAP4 NAND drivers (improve disk performance)
tuned LPDDR RAM timings (+10% throughput; more info)
optimized ext4 mountings
Android 3.4 low memory killer
ultra kernel samepage merging (UKSM; enabled by default)
fsync toggle
zRAM from 3.7 kernel (with fast LZ4 compression)
improved memory handling routines (memset, memzero, ...)
switch to disable the MMC CRC checking (more info)
Network:
TCP congestion control algorithms: westwood (default), cubic, reno
DTIM skip override (what it is and how it works)
Misc:
custom voltage control
timer slack feature (what does it do?)
fast charge
vibration strength control
sound control (high performance sound, volume boost)
battery life extender (BLX)
various performance and battery life tweaks
init.d support (no matter if the ROM supports it or not)
elevated systemui priority
module support (for slide2wake / PGM, e.g.)
more things... go check the source if you're interested.
compiled with Google GCC 4.7 toolchain (from Android NDK r9)
optional anykernel2 package by osm0sis for Android 4.3 and 4.2 compatibilty
Download links:
Major release for Android 4.2/4.3/4.4 (latest version: r60)
Release post: click here
IMPORTANT: Please read this post to find out which of the two files (fixed RAMdisk or anykernel2) you need!
Android 4.4 (fixed RAMdisk) Mirror #1: boypetersen.de
Android 4.4 (fixed RAMdisk) Mirror #2: mediafire.com
md5sum: 6b97f24357137d91768ad8c4d245e894
Android 4.2 / 4.3 / 4.4 (anykernel2) Mirror #1: boypetersen.de
Android 4.2 / 4.3 / 4.4 (anykernel2) Mirror #2: mediafire.com
md5sum: 0927620e85648bb98f910ac95e9bc74b
__________________________________________________
Older versions
boypetersen.de
__________________________________________________
Notes:
Compatible to:
all Galaxy Nexus devices (maguro, toro, toroplus)
all Android 4.2, 4.3, 4.4 based ROMs
both EXT4 and F2FS filesystems
Installation:
Flash the provided zip file with TWRP or CWM. If you're in doubt which file (fixed RAMdisk or anykernel2) is the right one for you, read this post
Having problems? Please give informative feedback, so that I or other users can understand what exactly is wrong and under which circumstances.
Changelog:
r59 >> r60
cpufreq: ondemandplus: adaptive timer_rate improvements (fixed some code of which I long knew it wasn't that good. The governor feels a little more responsive now)
tuna: very slightly relax ram timings (few users reported some instabilities which have been fixed by this)
reenable HDMI mirroring on GNexus portrait dock
ramdisk: replace new charger binary with previous one (-> charging percentage display works again)
ramdisk: retry moving systemui to parent task group 10 times (may help with the issue it stays in the "apps" group, as someone reported)
Click for full change log
Knowledge-base:
Most settings can be controlled with kernel settings apps. Trickster MOD fully supports fancy kernel. With it you can control:
CPU min frequency
CPU max frequency
CPU max screen-off frequency
CPU min screen-on frequency
GPU frequency
CPU governor
CPU governor tunables
I/O scheduler
read-ahead buffer
TCP congestion algorithm
CPU multi-core scheduling
fast charge
sound control
battery life extender
fsync
vibration strength
custom voltage
temperature control
color, contrast, gamma, content-adaptive brightness
zRAM
ondemandplus basics and tunables
ARM CPU topology: multi-core scheduling explained ('Multi core power saving' in Trickster MOD)
launcher white list to make your launcher 'unkillable'. Also: How to disable the white list
WiFi: DTIM skip override
LPDDR RAM timings tuning
timer slack feature: what does it do?
frandom: why it is not included in this kernel
init.d: how to use it
MMC CRC control: what it does and how to use it
Chit-chat:
What ROM / computer OS am I running?
People ask me this sometimes. On my Galaxy Nexus, I'm running Cyanogenmod 11 Nightlies and obviously Fancy Kernel. On my home PC (my Android build environment), I'm running Ubuntu 13.10.
Why did I name it 'fancy kernel'?
Because I do not want to use some random fancy name, but somehow have to give the kernel a name that is easily remembered. So after some self-irony involvement, I picked this ****ty name :>
What is so special about this kernel?
It offers superb battery life with a smooth and stable user experience. I am aware that all kernels claim that. Just try, see for yourself and report back. Innovations of this kernel are e.g. the screen-on min frequency setting, the ondemandplus governor and the SIOplus scheduler, since I implemented them myself. Also, I wanted many other improvements that exist across the several great kernels around XDA. After all, this kernel is based on other people's work for like 95 percent (like most kernels are).
Why did I build this Kernel initially?
Well that's rather easily answered. I used to use Franco kernel (which I really liked), but I wanted a kernel for myself which fits exactly to my needs. In particular, I especially wanted working hotplug, GPU OC controls, the option to set a minimum screen-on frequency and several hardcoded settings.
Oh, and yes: I built the kernel because I had fun doing so. But be not mistaken that I am a 'playaround kid': I dislike pulling in every little mod someone made. What I want is stability.
After some time I realized hotplugging would not be stable. After that I wrote the ondemandplus governor to save battery.
Why did I release it if I built it for myself?
I did not plan to release it at first. But I decided to release it since there was this one new feature (as named before: the screen-on min frequency control). I thought 'maybe it can contribute to others as well.' Also, maybe people like my compilation. Sharing is caring :>
Announcement:
The thread now has more than 1.000.000 hits! This is awesome, thank you for your interest!
Credits for code: Cyanogenmod, Google, kernel.org, Texas Instruments
bsmitty83, edoko, Ezekeel, faux123, franciscofranco, gokhanmoral, gwindlord, Huexxx, imoseyon, mpokwsths, osm0sis & Franco Dev Team, TeamHorizon
Credits for the Fancy Updater app: Parthipan Ramesh
Credits for the logo/artwork: DaNi_!
Source (including defconfig and RAMDISK): https://github.com/boype/kernel_tuna_kk44
A shout-out to the donators who help me pay the file hosting and buy me beer: 1haumann1, aaamador, agritux (2x), akaria, Bastian L., bigknowz, Blackcrx, creeve4, Fabio A., Ferhat Uğur C., James F., jsage, kuyam, Lancez, mpokwsths, n2rjt, nailz420 (2x), okanb3, omid900, rcozzi, Taomyn, teleplasma
Do you like my work? Hit 'thanks' and/or rate this thread with 5 stars.
Has my work improved your user experience? Consider a small donation.
Please do not PM me with questions, post in the thread instead.
XDA:DevDB Information
[KERNEL] Fancy Kernel r60 [Android JB+KK] [F2FS/EXT4] [Linux 3.0.101+] [OCT-24-2014], Kernel for the Samsung Galaxy Nexus
Contributors
boype
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: r60
Stable Release Date: 2014-10-24
Created 2014-10-12
Last Updated 2014-10-24
downloading now , will share results in a few charges !
I usually stick with a couple certain kernels, because every time I try one outside of my 'safe' kernels, they don't play nice with my device.
I've decided to give this kernel a chance, mainly because it's new and I have the day off to test it out.
Re: [KERNEL][4.2] Fancy Kernel (Rel. #1) (JAN-24-2013)
Who knowz m not becoming a part of a great thread in the future..lets try this out
Sent from my Galaxy Nexus using xda premium
Trying this kernel for 2 days.
I can say, wonderful work.
Thanks boype!
Running it now at 192/1420 with 537 as max screen off. Pegasusq and bfq. GPU = 384 and SR remains on.
Can't tell how battery life is, as I just installed it. Charging phone back to 100 right now.
It is very smooth and responsive from what I've done so far though. Going to keep with this kernel for a couple days, see how it compares to my fall back, LeanKernel + Tweaks. So far, so good though.
Re: [KERNEL][4.2] Fancy Kernel (Rel. #1) (JAN-24-2013)
anybody test NFS17 game on this kernel?
Re: [KERNEL][4.2] Fancy Kernel (Rel. #1) (JAN-24-2013)
Wow, sound great
So, Can i flash it over stock 4.2.1 ?
thebogy said:
Wow, sound great
So, Can i flash it over stock 4.2.1 ?
Click to expand...
Click to collapse
As long as you are rooted, I don't see why you wouldn't be able to. I'm pretty sure being rooted is all you need to flash a kernel.
Re: [KERNEL][4.2] Fancy Kernel (Rel. #1) (JAN-24-2013)
great kernel ！
keep it:thumbup:
Sent from my Galaxy Nexus using xda premium
pgm support?
Re: [KERNEL][4.2] Fancy Kernel (Rel. #1) (JAN-24-2013)
yes.
Sent from my Galaxy Nexus using xda premium
I'll give it a try but won't stick with it until an Stable release of CM10.1 is available, because I'm updating at every 3 nightlies and this kernel with an stable release of CM10.1 should be a monster. (and obviously I don't want to reflash it every new nightly.)
I liked it! I hope for further development of this kernel! Good luck! :good:
Re: [KERNEL][4.2] Fancy Kernel (Rel. #1) (JAN-24-2013)
I would be regularly sharing my experience about this kernel..really smooth undoubtedly.. Just had first SoD..
Sent from my Galaxy Nexus using xda premium
try it now :good:
Re: [KERNEL][4.2] Fancy Kernel (Rel. #1) (JAN-24-2013)
dratif said:
I would be regularly sharing my experience about this kernel..really smooth undoubtedly.. Just had first SoD..
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
On which governor? Default settings? Did you UV? Some more info please
Verstuurd van mijn Galaxy Nexus met Tapatalk
Re: [KERNEL][4.2] Fancy Kernel (Rel. #1) (JAN-24-2013)
Hy
I want to try this new kernel,
But i dont see volume boost in the features list, it's just missing in changelog, or no volume boost inside ?
Thanks
Sent from my Galaxy Nexus using xda premium
Re: [KERNEL][4.2] Fancy Kernel (Rel. #1) (JAN-24-2013)
Just flashed this kernel. The speed seems to be really great! I hope the battery life is equal to this
Verstuurd van mijn Galaxy Nexus met Tapatalk
dratif said:
I would be regularly sharing my experience about this kernel..really smooth undoubtedly.. Just had first SoD..
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Overclocked CPU or GPU? If yes, I need to increase voltages.
[Kernel][4.1.2][TW] ✫★✫ ARC KERNEL™ ✫★✫ April 28, 2013
ARC KERNEL™
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
By using the kernel you agree with the above terms!
How to install:
Flash the kernel
Clear cache and dalvik cache.
Reboot
More info on Kernel Governors, Modules, I/O Schedulers and CPU Tweaks Check out this thread
Great widget to control fast charge Fast charge widget play store link
Also another must have app! Full control over your phone and kernel for free! (Just like Faux clock) Trickster Mod Kernel settings
And of course Faux clock (if you can afford it grab it and support this awesome developer! I did ) Play store link,paid app
What is fast charge:
This allows one to force AC charging for any charger that is detected as USB (e.g. many car chargers) and pull the full current the charger can support. Without Fast charge, when connected to the computer or even car charger you will very low current causing the charge time to be a lot longer. With fast charge active the current is set to the max allowed (and/or safest) and charging time will reduce greatly. It also provides additional security when connecting to public charging stations because by forcing AC charging, USB/adb data transfers are disabled, protecting your data. When fast charge is active you will not be able to access your data on your device. You will need to turn fast charge off to access them. Hope this helps everyone understand it more.
Governors:
brazilianwax
interactivex
lazy
lulzactive
minmax
ondemandx
savagedzen
scary
smartass
lionheart
wheatley
SmartassV2
Intellidemand
Lagfree
pegasusq
Badass
Schedulers:
ROW
SIO
v(r)
Zen
My Github / source - Link
Code:
Version 1.2 - April 28, 2013
- added the BLN lib I forgot in v1.0-1.1
Version 1.1 - April 28, 2013
- added V(r) scheduler
- added FIFO scheduler
- added Badass Governor
* 2-phase badass freguency
* 3-phase power-efficiency badass algorithm
* GPU_Contol power efficiency badass algorithm
* lowbat_powersave power-efficiency badass algorithm
* allows bypassing phases
- 2-phase power efficiency ondemand algorithm
- Limit Max Freq (Safety)
Version 1.0 - April 28, 2013
- added fast charge (need app to turn it on and off, see above)
- Add UKSM 0.1.2
- UKSM: Upgrade to 0.1.2.2
- mm: optimize Kernel Samepage Merging(KSM)
- Dark force commit - [B]HUGE THANKS TO TDJ!!![/B]
- lib/sradix-tree.c: fixed
[B]- Renamed and rebased -[/B]
Version 0.7.4 - April 20, 2013
- overclocked by Faux! Thank you sir!!!
* raised Max voltage to 1.35 voltes
* raised Max OC to 1.72GHz
- redid BLN
- cleaned up some stuff
v0.6.5 April 17, 2013
- added SMARTASS
- added LULZACTIVE
- added SCARY
- added INTERACTIVEX
- added WHEATLEY
- added LIONHEART
- added BRAZILIANWAX
- added ONDEMANDX
- added SAVAGEDZEN
- added BADASS
Please test and confirm these are fully functional. Thanks!
v0.5 - April 14, 2013
- fixed governors not being included.
- more fun stuff coming now.
v0.2-0.3. - April 12, 2013
- hopefully fixed kernel not building with added governors thanks to ptmr3 for the tip!
Still need conformation...
v0.1 - April 11, 2013
- initial release
- added governors SmartassV2, Smoothass, Intellidemand, Lagfree, and pegasusq
- added add ROW, SIO, and Zen schedulers
- Stock clocking and voltage
- init.d support
- unsecure
- Much more to come
Big thanks goes out to:
TDJ
Faux123
ktoonsez
ptmr3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
New thread is here
Saved . . . . . . . . .
first lol
Seems legit... Second
Ok she is all set up! Let me know what you guys think... again for those who really don't know me I no longer own this devices so somethings will be a hit or a miss. This kernel has been confirmed by my awesome users in my Infamous ROM thread so we know it is fully functional and not experimental at this time. Yes those are screen shoots of my S3 kernel... I need a bunch of clean screen shots like these so a can replace them. If you can help please do! Thanks guys.
Work rom AOSP 4.1.2...
Sent from my table dance...
Since your rebased it and renamed it... is BLN still works ???
thanks for your works
Jamison904 said:
Ok she is all set up! Let me know what you guys think... again for those who really don't know me I no longer own this devices so somethings will be a hit or a miss. This kernel has been confirmed by my awesome users in my Infamous ROM thread so we know it is fully functional and not experimental at this time. Yes those are screen shoots of my S3 kernel... I need a bunch of clean screen shots like these so a can replace them. If you can help please do! Thanks guys.
Click to expand...
Click to collapse
Hey bro your download link goes to your S3 folder on Goo. May want to fix that before the flashers start mucking up their phones.
Sent from my SGH-T989 using Tapatalk 2
Jamison I think you need to update your download folder link. When I click it takes me to your s3 kernel folder
Sent from my Infamous Hercules.
I noticed that the download link takes me to the S3 folder for kernels. Just be careful downloading and browse to the correct folder in the T989 folder and NOT the T999 folder.
Sent from my SGH-T989D using xda premium
Thanks guys... duh..... I swear I changed it.... just it just didn't take when I saved. Anyways corrected the links. Thanks everyone! Also everything that working in TeamInfamous Kernel is included here. Need confirmation on fast charge. Thanks!!
Also, TW only at this point. I plan on making an AOSP/CM/AOKP kernel for you guys but it will be a different thread since it will be made for 4.2.2.
Planning to flash when changing to Tw in few Hours.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Update.... already
Code:
Version 1.1 - April 28, 2013
- added V(r) scheduler
- added FIFO scheduler
- added Badass Governor (need commemoration it is working)
* 2-phase badass freguency
* 3-phase power-efficiency badass algorithm
* GPU_Contol power efficiency badass algorithm
* lowbat_powersave power-efficiency badass algorithm
* allows bypassing phases
- 2-phase power efficiency ondemand algorithm
- Limit Max Freq (Safety)
Does it support bln?
Sent from my SGH-T989 using xda premium
1.1 running smooth about 3 hours now. Haven't been able to test features though.
Sent from my SGH-T989 using xda premium
Just tried it and Bln Control pro give me error : liblights incompatible
Sent from my Nexus7 using xda app-developers app
Btw I'm getting boot loop.did the wipes
Sent from my SGH-T989 using xda premium
Tornade69 said:
Just tried it and Bln Control pro give me error : liblights incompatible
Sent from my Nexus7 using xda app-developers app
Click to expand...
Click to collapse
Dang it...lol. Forgot the BLN lib. Give me a sec and I'll add it and reup
Sent from my dark hole called an office.
edit: ok guys added the lib and uploaded to both servers.
Just install it and BLN working perfectly. Kernel running smooth
Thanks a lot Jamison904
Sent from my SGH-T989 using xda app-developers app
[Kernel][TMO/ATT][4.1.X][TW]✫★✫KINETIC PULSE KERNEL™ and MINIMUM KERNEL™ ✫ ★✫
KINETIC PULSE KERNEL™
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This kernel is only for TW 4.1.x T-mobile/Att ROMS/devices at this time. Enjoy!
More info on Kernel Governors, Modules, I/O Schedulers and CPU Tweaks Check out this thread
Great widget to control fast charge Fast charge widget ply store link
Also another must have app! Full control over your phone and kernel for free! Trickster Mod Kernel settings
What is fast charge:
This allows one to force AC charging for any charger that is detected as USB (e.g. many car chargers) and pull the full current the charger can support. Without Fast charge, when connected to the computer or even car charger you will very low current causing the charge time to be a lot longer. With fast charge active the current is set to the max allowed (and/or safest) and charging time will reduce greatly. It also provides additional security when connecting to public charging stations because by forcing AC charging, USB/adb data transfers are disabled, protecting your data. When fast charge is active you will not be able to access your data on your device. You will need to turn fast charge off to access them. Hope this helps everyone understand it more.
How to install:
Flash the kernel
Clear cache and dalvik cache.
Reboot
Huge thanks goes out to:
TDJ
Faux123
ktoonsez
ptmr3
Code:
V1.4 - May 14, 2013
- lowered min to 192
- cleaned up some
- removed problem governors until I can patch them
- should support 64gig SD cards now. Please confirm.
- May 14, 2013
* ATT thread release.
v1.3 - April 29, 2013
- disabled Ondemandx and Scary until work out issues with them not playing nice with UKSM
- tweaked brazilianwax and pegasusq, should be rock solid now.... maybe.
- added BFQ Scheduler
* block: prepare I/O context code for BFQ-v4 for 3.0
* block: cgroups, kconfig, build bits for BFQ-v4-3.0
* block: introduce the BFQ-v4 I/O sched for 3.0
* bfq: prevent aliased requests from starving I/O
- msm: hotplug: Support cpu hotplug in no PM cases
- d2: Increase size of ION AUDIO carveout to 5MB TMO/ATT only
- cleaned up a few things as well
V1.2 - April 26, 2013
- Add UKSM 0.1.2
- UKSM: Upgrade to 0.1.2.2
- mm: optimize Kernel Samepage Merging(KSM)
- By default, the wifi chip disabled packet filters when phone is out of
- M2: otg: fix runaway wakelock
- cpufreq: Make sure user_policy min/max get written
- cpufreq: Make sure max is NOT set while booting
- Scheduler screen OFF profile: Added in save values to all schedulers …
- Linux 3.0.67
- Linux 3.0.68
- Trinity colors Morfic: Add toggle to enable/disable Trinity colors
How to set it navigate to /sys/devices/virtual/sec/tsp/trinity_colors
1 = on
0 = off
reboot required.
Huge thanks to ktoonsez on these!!
V1.1 - April 21, 2013
- activated OC
- activated Faux sound support
- clean a few things up in the build
- also made a non overclocked version
v1.0 - April 21, 2013
- Linux 3.0.66 Kernel
- Adreno 2xx GPU overclocking to 480 MHz
- CPU overclocking up to 1.836 GHz (nt active in v1.0)
- Undervolted
- User voltage control
- Trinity colors
- Faux sound controller support [URL="https://play.google.com/store/apps/details?id=com.teamkang.fauxsound&hl=en"]PlayStore link[/URL]
- added fast charge support (need an app to turn it on)
- init.d support
- unsecure
- My bootanimation mod to add custom bootanimation support
Governors:
brazilianwax
interactivex
lazy
lulzactive
minmax
ondemandx [removed for now]
savagedzen
scary [removed for now]
smartass
lionheart
wheatley
SmartassV2
Intellidemand
Lagfree
pegasusq
Schedulers:
CFQ
Deadline
Noop
ROW
SIO
v(r)
FIFO
Zen
BFQ
My Github / source - Link
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
By using the kernel you agree with the above terms!
Download Folder
Code:
- none at this time.
MINIMUM KERNEL™
This kernel is only for TW 4.1.x T-mobile/Att ROMS/devices at this time. The whole point for this kernel is to give the user the features wanted from all the other kernels but stay the closest to stock as possible. All the governors and the schedulers are stock and what was found in the source from Samsung. This Kernel is 98% stock and the only changes to the code are listed in the change log. blacknight1114 and I have been testing all night and today. Running very smooth and great battery life! Thanks buddy for giving me a hand testing! This Kernel would even make a great replacement for the stock kernel in all the TW ROMs and developers you have my permission to include it if you wish.
General info:
More info on Kernel Governors, Modules, I/O Schedulers and CPU Tweaks Check out this thread
Great widget to control fast charge Fast charge widget ply store link
Also another must have app! Full control over your phone and kernel for free! Trickster Mod Kernel settings
How to install:
Flash the kernel
Clear cache and dalvik cache.
Reboot
Big thanks goes out to:
TDJ
Faux123
ktoonsez
ptmr3
Code:
v1.2 - May 9, 2013
- cpufreq: Make sure user_policy min/max get written
- cpufreq: Make sure max is NOT set while booting
- cpufreq: More to be sure 1512 is limit on boot
- mm: change read ahead to 256
(got bored and added a version with my personal AOKP Kang project kernel splash screen)
v1.1
- Faux Sound:
* Sound Control: Sound control for WCD93xx codec
* sound control: update control offsets for MSM8960 soc
* Sound Control: Added headphone poweramp controls
v1.0
- initial release
- Add UKSM 0.1.2
- UKSM: Upgrade to 0.1.2.2
- mm: optimize Kernel Samepage Merging(KSM)
- fastcharge v1
- fsa9485: fastcharge v3 - fixed
- Trinity color
My source - Github - Jamison904
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
By using the kernel you agree with the above terms!
Download Folder
Code:
- none at this time.
thanks for also posting this great kernel where more people can see it -- using this on Bell and the i747m and it is the best kernel I have flashed on the phone!
Thanks bro!
Sent from my dark hole called an office.
This is really a great kernel!!
Thank you!!
Thanks buddy! You guys think I should add my Minimum kernel in the other saved posts?
Sent from my dark hole called an office.
Super kernel man!! Thanks for this!
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Thanks bro!
Sent from my dark hole called an office.
Wow this kernel looks promising good! Sadly I'm on aosp. Tryed it on my sis tw s3 n looking good. Are you planning to make a aosp 4.1.x also?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
kinetic pulse kernel
i just flashed the kernel, i really like the boot animation. those 2 starting eyes are both creepy and cool at the same time. thumbs up to you dude.
Flashed kernel but didnt get the cool splash. On hyperdrive12. Also 64 gig card not readable just says that its safe to remove? Its formated fat32 snd works with the stock kernel from hyperdrive.
Sent from my SGH-I747 using xda app-developers app
DeeVine said:
Wow this kernel looks promising good! Sadly I'm on aosp. Tryed it on my sis tw s3 n looking good. Are you planning to make a aosp 4.1.x also?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
I already do. I just haven't made a thread for it. It is in my AOKP thread over in the T-Mobile section, 2nd or 3rd post. Hold on and I'll get a link for you. http://forum.xda-developers.com/showpost.php?p=37111199&postcount=3
Sent from my dark hole called an office.
solfly7 said:
Flashed kernel but didnt get the cool splash. On hyperdrive12. Also 64 gig card not readable just says that its safe to remove? Its formated fat32 snd works with the stock kernel from hyperdrive.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
It should support it as the defconfig was setup to... but I don't have a 64g SD card to test. Let me check into it and get back to you. Working on an update now so if it was missing I'll be sure to add it.
Sent from my dark hole called an office.
Jamison904 said:
I already do. I just haven't made a thread for it. It is in my AOKP thread over in the T-Mobile section, 2nd or 3rd post. Hold on and I'll get a link for you. http://forum.xda-developers.com/showpost.php?p=37111199&postcount=3
Sent from my dark hole called an office.
Click to expand...
Click to collapse
That's for 4.2.x jb. I'm still on 4.1.x. But thanks anyways. ..
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
well. . . Check out my AOKP ROM then. lol. http://forum.xda-developers.com/showthread.php?t=2115097
Sorry I'm sticking with miui v5 which is base on 4.1.2. But I herd the galaxy nexus is working on 4.2.2 for their miuiv5. When it ports to the s3, I'm deffently gonna use your kernel. It'a already running smooth on my sis s3...Sorry for the off topic there.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel Status: STABLE
COLONEL-X(B) FEATURES:
GENERAL:
N900TUVUDNF4 Base
Linux Kernel Updates: 3.4.103
Linaro 4.9.1
SELinux: Permissive
Built with NEON VFP optimization flags
File Systems: exFAT, FAT, NFS, NTFS, F2FS
SWAP: swap, frontswap, zswap, znswap
USB Mass Storage
XZ Compression
xConfig (Inspired by Imoseyon's lkconfig)
Google's Snappy Compression/Decompression Library
Vmalloc Savings
Click to expand...
Click to collapse
EXTRAS:
Synapse - AndreiF & apbaxel
USB FastCharge - yank555-lu
MDNIE Lite Controls - yank555-lu
LED Extended Controls - yank555-lu
Battery Life Extender (BLX) - Ezekeel
MSM-Hotplug - myfluxi
Intelliplug - faux123
Faux Sound - faux123
Bricked MPDecision - show1984
KThermal - Ktoonsez
Click to expand...
Click to collapse
GOVERNORS & SCHEDULERS, ETC:
Overclocked: 2.8GHz
OC'd L2 and Bus Bandwidth
Custom Voltage Table - Imoseyon
Voltage Minimum: 600mv
CPU Hardlimit 2.0 (Yank555)
Conservative
InteractiveX - Imoseyon
BFQ Scheduler - ayysir
FIOPS Scheduler - Doomlord
SIO Scheduler - Doomlord
VR Scheduler
ZEN Scheduler - Brandon Berhent (No username)
Simple GPU Gov - faux123
Disabled Userspace Governor
Click to expand...
Click to collapse
ColonelX(B) R24 Changelog
Code:
Rebased on Kitkat Build NF9
Thermal: Add Intellithermal V2
Thermal: Removed KThermal
Driver: Add Sweep2Wake and Sweep2Sleep
CPUFreq: Some changes to Smartmax
Driver: Add Custom Vibration tool
Version: R24 ColonelX | ColonelXB
Download: Old Builds
Source (Updated on Stable releases)
XDA:DevDB Information
ColonelX, Kernel for the T-Mobile Samsung Galaxy Note 3
Contributors
itsmikeramsay, itsmikeramsay
Kernel Special Features: Listed above
Version Information
Status: Stable
Current Stable Version: R24
Stable Release Date: 2014-09-19
Beta Release Date: 2014-04-09
Created 2013-11-23
Last Updated 2014-09-25
[KERNEL][AOSP][N900X] | ColonelAX R11 | 3GHz | 3.4.80 | Much More!! - 2|17|14
DISREGARD THIS POST, WIP FOR ColonelAX!!!
Kernel Status: BETA
COLONEL-AX FEATURES:
GENERAL:
Supports Unified Source by CyanogenMod
Linux Kernel Updates: 3.4.82
GCC 4.8.3
SELinux: Permissive
Built with NEON VFP optimization flags
File Systems: exFAT, FAT, NFS, NTFS
SWAP: swap, frontswap, zswap, znswap
USB Mass Storage
LZO Compression (Bigger file, but boots much faster)
Ultra Kernel Same-page Merging (UKSM) - jasmison904
xConfig (Inspired by Imoseyon's lkconfig)
Google's Snappy Compression/Decompression Library
Vmalloc Savings
Click to expand...
Click to collapse
EXTRAS:
USB FastCharge - yank555-lu
MDNIE Lite Controls - yank555-lu
LED Extended Controls - yank555-lu
TouchWake Finger/S-Pen - yank555-lu - Note1
Battery Life Extender (BLX) - Ezekeel
Bricked Mpdecision - show1978
FK Thermal - franciscofranco
Intelliplug - faux123
Intellithermal - faux123
Note1: Touchwake disables when you hit the power button to turn off display. YOU MUST let the screen timeout and turn off itself in order for touchwake to work for the set delay time you have configured!!
Click to expand...
Click to collapse
GOVERNORS & SCHEDULERS, ETC:
Overclocked: 3.01GHz (3GHz)
Underclocked: 96MHz
OC'd L2 and Bus Bandwidth
Custom Voltage Table - Imoseyon
Voltage Minimum: 600mv
ConservativeX
InteractiveX - Imoseyon
Intelliactive - faux123
Intellidemand - faux123
OndemandX - Imoseyon
OnDemandPLUS - boype
PegasusQ - ByungChang
Smartmax - maxwen
Smartmax_eps - maxwen
SmartassV2 - erasmux
WheatleyX - Based on Wheatley (Ezekeel)
BFQ Scheduler - ayysir
FIOPS Scheduler - Doomlord
SIO Scheduler - Doomlord
SIOPLUS Scheduler - boype
VR Scheduler
ZEN Scheduler - Brandon Berhent (No username)
Simple GPU Gov - faux123
Disabled Userspace & Powersave Governors
Click to expand...
Click to collapse
Colonel-AX R11 Changelog
Code:
Initial Release!!
Download: N900X - R11
And one for me...
Moved here since folks were requesting it...:good:
Running good
Sent from my DragonMOD-N9005 using xda premium
Thx
Sent from my SM-N900T using Tapatalk
Awesome
Sent from my SM-N900T
Great work
SM-N900T using xda app-developers app.
Liquor out front, poker in the back.
Woohoo 3GHz awesome!!! Plus its goodies of course. Testing now.
Only bug folks so far is benchmarking for some. It can lock up your phone till you reboot
itsmikeramsay said:
Only bug folks so far is benchmarking for some. It can lock up your phone till you reboot
Click to expand...
Click to collapse
Well not true because my phone won't handle 2.96GHz at all it crashes and it crashed as well as soon as I put it to 1202mV to try to make it stable.
Sent from my SM-N900T using xda app-developers app
XxLostSoulxX said:
Well not true because my phone won't handle 2.96GHz at all it crashes and it crashed as well as soon as I put it to 1202mV to try to make it stable.
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
Sucks to know bro. These chipsets are funny.
For those that can run 2.96GHz that was the only bug so far. Those that can't run it at all, that's something we'll look into and see if we can resolve. Some just can't male it there unfortunately.
itsmikeramsay said:
Sucks to know bro. These chipsets are funny.
For those that can run 2.96GHz that was the only bug so far. Those that can't run it at all, that's something we'll look into and see if we can resolve. Some just can't male it there unfortunately.
Click to expand...
Click to collapse
Edit to what i previously posted i guess it only happens as soon as i set the voltage to 1.2V otherwise its fine in-till benchmarking which means it just cant handle staying at those high speeds on all cores i assume?
XxLostSoulxX said:
Edit to what i previously posted i guess it only happens as soon as i set the voltage to 1.2V otherwise its fine in-till benchmarking which means it just cant handle staying at those high speeds on all cores i assume?
Click to expand...
Click to collapse
That's what I'm trying to figure out now lol. Seems like the case. Its me and DJ's first kernel so we're still learning stuff. Weird it works fine til benchmarking. Hopefully we find a solution real soon.
itsmikeramsay said:
That's what I'm trying to figure out now lol. Seems like the case. Its me and DJ's first kernel so we're still learning stuff. Weird it works fine til benchmarking. Hopefully we find a solution real soon.
Click to expand...
Click to collapse
yeah but the voltage is a problem too! that could be a factor that some phones cpu isn't as good. try setting your voltage to 1.2V for 3GHz and see if it crashes.
XxLostSoulxX said:
yeah but the voltage is a problem too! that could be a factor that some phones cpu isn't as good. try setting your voltage to 1.2V for 3GHz and see if it crashes.
Click to expand...
Click to collapse
Ok I'll test it out.
Running smooth as Buddha and snappy as hell!
Sent from my SM-N900T using Tapatalk
After a day of running it seems this kernel could be a battery killer. My battery when down much faster if I we r email to use lean kernel... hmm and yes I didn't over clock and my voltages were the ones included.
Sent from my DragonMOD-N9005 using xda premium
OPGT said:
After a day of running it seems this kernel could be a battery killer. My battery when down much faster if I we r email to use lean kernel... hmm and yes I didn't over clock and my voltages were the ones included.
Sent from my DragonMOD-N9005 using xda premium
Click to expand...
Click to collapse
What governor were you using? Amd youre on 9005 right?
I gotta figure out why some 9005 users are seeing battery drain. I'll check it out today.
Ok, here is what I have figured out. At least with my hardware anyway. I'm using the latest version of TricksterMod and this is what I can get. I can boot up @ 3ghz with my voltage at 1.2 ONLY if I set it manually to exactly that. 1.2. If I use the incremental voltage steps it puts me at 1215. No go. It locks up and reboots. But if I manually set it to 1.2 even, it boots, and I can run Quadrant to benchmark. I have been able to successfully apply all governers with a 2.956 clock and use 2 schedulers (row and zen, so far) Seems like anything over 1.2 volts and the max clock, it locks up and reboots. Being as though no two chips are the same, somebody may get a higher voltage/clock before lock up. Who knows. Anyway, it runs great so far. Haven't had a chance to test battery life. Will post that later. I upoaded a few screenshots of my benchmarks running these freqs/voltages. So far, great work guys! This can only get better from here :good: