Develop Bugs

[ROM] Cow ROM v7 (Bionic Cow 2)

Version 7 of Cow ROM: Bionic Cow 2.
- For arco68
It's basically an update to Bionic Cow using latest firmware from Sammy - I8150DXLC1. Features:
1) The OC kernel has been rewrote. It should be more stable and graphic score improved.
2) Bionic Scorpion Optimization library. Using NEON instructions for faster memory operations. Learned from arco68 github for ICS.
3) CowPanel 2 - use this util to configure VSYnc on/off. For speed, use VSync off. For smooth, use VSync on + triple buffering. Read more here. You also may configure zRam option here. zRam is off by default. Read more here.
4) Many CPU governors: Default using OnDemandX for best battery; 80% left in 24 hours. Use "Performance" for benchmarking.
5) More RAM - 358Mb available, compare to 351Mb in stock ROM.
6) Using a super light Zeam Launcher. Thanks cloakt for permission to use.
7) Internal / external sd card swap, CRT screen off effect, Low Memory Killer Tweaked, OnDemandX tweaked, Custom Bootup animation and Larger SD Card cache, Voice Search, etc.
8) Based on arco68 GB kernel. Without which, none of this is possible.
Special thanks to arco68, tch9, andynroid and pinkyunki, Murny Umairah, Myrule Anarki, Santos San Martin and Mohd Fazrin Daud from SGW group.
*WARNING*: Don't use OC ROM unless you know what you are doing. The ROM will automatically reset to 1.4ghz - OnDemandX after reboot as a safety precaution. I only set to 1.8ghz OC for short time during Cheat Engine hacks, zip / unzip, benchmark, etc. I always reset back to max 1.4ghz for normal used. I strongly recommend you to set a temperature profile if CPU ever get above 50C you should lower max clock back to 1.4ghz.
So, here is the link:
None Overclock:
Part 1: http://www.mediafire.com/?b0hcu82bpq9cu9n
Part 2: http://www.mediafire.com/?6qy19q4995g75w0
Overclock:
Part 1: http://www.mediafire.com/?7k7ei26n46e44bb
Part 2: http://www.mediafire.com/?e368mc427y19611
Here is how to install the ROM:
1. Enable recovery.
2. Use 7zip, right click on xxxx.001, extract. It will create the zip file required for flashing. Copy this zip into your phone. (Don't extract xxx.002)
3. Boot into ClockWorkMod / RZRecovery, backup your current ROM using nandroid (just in case).
4. If you are upgrading from my previous ROM;
- BEFORE installing the ROM, Uninstall CowPanel: Setting, Application, Cowpanel, uninstall
- Wipe Dalvik-cache. All your settings and app will remained. Theme will changed though.
5. If you are installing from stock or from other custom ROM, best to wipe everything using CWM, including your USB and external sd card. Reinstall everything from fresh, don't restore anything from Titanium Backup or anything.
Google Map? Missing apk? Original theme? If you want to restore to stock theme, get all the apk here.
Report Problem: If you encounter FC or any problem, please provide logcat so I may trace it:
1. Connect phone to USB
2. adb logcat > log.txt
3. In your phone, reproduce the crash / FC / etc
4. Kill all adb process in your PC
5. Zip and send me the log.txt
Update Radio Firmware
I8150DXLC1 comes with an updated Radio firmware. This should improve voice call quality. Check if you need to update this, go to Check "Setting", "About phone", "Baseband version". If you already have I8150DXLC1 or newer you dont need this. If not, use Odin to flash this. This will only update the Radio firmware, nothing else will change. You can do this before or after install Bionic Cow 2 ROM.
1. Get Odin.
2. Get ancora.ops.
3. Get radio firmware.
4. Boot into "download mode". Connect phone to PC. Start Odin
5. Select OPS file = ancora.ops. Select One Package = radio firmware, check "One package", "Auto reboot", "Protect OPS".
6. Start and wait till it complete.
Old Bionic 1
Non-oc:
Part 1: http://www.mediafire.com/?6994bk9qhxkde8w
Part 2: http://www.mediafire.com/download.php?gvc1j2da6c51u5a
- Refer to this guide on how to extract this. Thanks andynroid.
OC: (link fixed)
Part 1: http://www.mediafire.com/?cr5nc6zb1k5w0ye
Part 2: http://www.mediafire.com/download.php?u1xp01yr15saujw
Disclaimer: I am not responsible if you brick your phone I tried it, it work on my phone and a few others.

wow. downloading, will try and post feedback. did you add any languages? do you know a way to do so? thanks

cowithgun said:
This is my 6th ROM! It has all the benefit from all my previous ROM and more. Featuring Bionic Theme created specifically for this ROM! This ROM is a result from group of friends helping each other. Without it, it would be so bore and this ROM may never exist. Thanks pinkyunki, Murny Umairah, Myrule Anarki, andynroid and all the friends from our SGW group.
Click to expand...
Click to collapse
Awww Yeaaah! Just what i need! Hehehe what a coincidence when i said about theme-ing just now. Currently downloading your Bionic ROM!
Btw, is the scale-old-tv present in this ROM, Cow? HAHA! xDD

The Six Million Dollar Man...This Is The Six Million Dollar ROM !
Congratulations CWG.....!
Sent from my GT-I8150 using xda premium

andynroid said:
The Six Million Dollar Man...This Is The Six Million ROM !
Congratulations CWG.....!
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Thanks! I did spent more time on this ROM than in any other ROM.

andynroid said:
The Six Million Dollar Man...This Is The Six Million Dollar ROM !
Congratulations CWG.....!
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
You're one of the respected members in building this ROM, right? Wish i could be as great as you guys, developing something. Haih. :/

Downloading noww.!!!!xD
sent from another space

Thanks for this wonderfull rom cow!!
Antutu 5067 on 1,8GHz !
I really love the theme, very nice!!
Thanks my friend!!

As now, i'm using your Bionic, Cow. Love the green-ish theme, seems smoothly smart!
A few things btw :
1. When booting up, there is still sound of the boot animation. How to disable it?
2. When locking the phone, the transition is somewhat like distortion-type, not like the scale-old-tv in your previous ROM. Is it supposed to be that way or my phone goes wrong?
3. The "3G icon" in status bar alternately goes from small to big and vice versa. Also is this meant to be as such? :/
Apart of those, it is indeed a GREAT and SUPERB ROM.
Sent from my GT-I8150 using xda premium

Arrgh at 58% DL.......Part-2....
CRT......The ROM is too fast for it to execute...
Sent from my GT-I8150 using xda premium....Using CWG V6 TestBuild

TuxBrothers said:
Thanks for this wonderfull rom cow!!
Antutu 5067 on 1,8GHz !
I really love the theme, very nice!!
Thanks my friend!!
Click to expand...
Click to collapse
For benchmarking, you set to 1.8GHz for both minimum and maximum right? What governor did you use when using Antutu?
Sent from my GT-I8150 using xda premium

This ROM looks absolutely incredible
I envy you guys...i would love to use this rom, but unfortunately i need swype in czech, so this rom is not for me I wish you'd use European rom as a base for your roms ( maybe in the future? )

Why is everybody awake here...looks like somebody will be on MC due to COW BIONIC FOBIA.....
Its 4am here....bye guys be extracting n zipping n CWM.....BRB !
Sent from my GT-I8150 using xda premium

MAMUTHcz said:
This ROM looks absolutely incredible
I envy you guys...i would love to use this rom, but unfortunately i need swype in czech, so this rom is not for me I wish you'd use European rom as a base for your roms ( maybe in the future? )
Click to expand...
Click to collapse
i would like my little brother try this rom but no italian.
Inviato dal mio GT-I9100 usando Tapatalk

andynroid said:
Why is everybody awake here...looks like somebody will be on MC due to COW BIONIC FOBIA.....
Its 4am here....bye guys be extracting n zipping n CWM.....BRB !
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
it's 9:53 pm here in czech republic + I have night shift so no sleep for me right now

When im at home i will download and flash... Huhuhuh.
Sent from my GT-I8150

My Antutu none OC...
Sent from my GT-I8150 using xda premium

SyzwnFrzRdz said:
For benchmarking, you set to 1.8GHz for both minimum and maximum right? What governor did you use when using Antutu?
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
min speed ? ondemand or ondemandx ?

I must be dumb.
I download xxx.7z.001 and xxx.7z.002.
Right click on 001: extract here puts META-INF, data and system folders and the other files in the folders I am working in. If I right click and extract to GT-I8150-BIONIC it just puts those files in a folder. No sign of a flashable zip.
What am I doing wrong?
Bomoh, an user who doesn't have permission to post in Dev section yet, told me this solution and it's working. Thanks to him!
Extract 001 in a folder > select all the files > right click > 7-zip > add to archive.
In 7-zip window, change "Archive format" option from "7z" to "zip" then click OK.
Click to expand...
Click to collapse

Btw. This rom have portuguese on it?
Sent from my GT-I8150

[MOD] PIMP MY ROM v2.1.2 - Make Your Phone Awesome

READ 1ST BEFORE ASK
tested by my self using CM9 by arco B3
IM NOT RESPONSIBLE IF YOUR PHONE BRICKED.
This is not a ROM
this is tweaks/MODS/Hacks etc. for your phone
this is compatible with STOCK or AOSP ROMS
as long as you rooted your phone and init.d support i mean custom kernel
and CWM or any other recovery
Watch this for more info.
http://www.youtube.com/watch?feature=player_embedded&v=YpdGuj2oDkA
DOWNLOAD FOR GALAXY W
ORIGINAL DL LINK:
http://goo.im/devs/Androguide/Pimp%20my%20Rom/HDPI/PIMP_MY_ROM-v2.1.2-by-Androguide.fr-HDPI.zip
MIRROR MF:
http://www.mediafire.com/?f1yxzf99bndc685
INSTRUCTIONS
Make sure you are running a custom recovery (CWM or TWRP)
- Make sure you have busybox installed, if you don't or if you're not sure, download Busybox Installer from the Play Store (free)
- Make a nandroid backup of your current ROM, just in case
- Wipe cache and dalvik cache in recovery
- Flash PmR in recovery
- A wonderful touchscreen interface will pop-up
(devices need different touchscreen calibration, if the touchscreen doesn't work, use the menu button of your device, select "Calibration Tools" and follow the instructions)
- Follow the on-screen instructions, make your choices between all the different features to Pimp your Rom
- Select "Reboot my device" on last screen (or reboot from recovery) and enjoy
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Encountering installation issues ?
Do the following to fix most errors you might get on some devices :
Open the zip of the rom you are running with winrar or 7zip or whatever (the .zip file that you flash in recovery)
Inside this zip, navigate to : META-INF/com/google/android
Extract the file called "update-binary" and rename it to "update-binary-installer" then close your rom's zip
Open Pimp my Rom's zip (i.e : PIMP_MY_ROM-v1.5.3-by-Androguide.fr.zip)
Do not unzip it, inside this zip, navigate to : META-INF/com/google/android and delete "updater-binary-installer"
Now copy the "update-binary-installer" file you extracted & renamed from your rom to Pimp My Rom's zip (still in META-INF/com/google/android). Simply drag and drop it into PmR's zip to add it.
Close the zip and flash it
original thread PLEASE OPEN THIS LINK AND HIT THANKS TO HIM
http://forum.xda-developers.com/showthread.php?p=32086131#post32086131131
THANK YOU

Hello thank you for your effort, but please could you tell us what is the difference between this version and the original version??
i have tested the original pimp my rom version on CM9 build3 by arco, and it runs good as long as i don't install any init.d scripts tweaks!! cause if i put it the phone lags to much!!
anyway i will give a try
thank you

Someday, I will try it. Thanks for shared PMR
Sent from my GT-I8150 using xda premium

omid900 said:
Hello thank you for your effort, but please could you tell us what is the difference between this version and the original version??
i have tested the original pimp my rom version on CM9 build3 by arco, and it runs good as long as i don't install any init.d scripts tweaks!! cause if i put it the phone lags to much!!
anyway i will give a try
thank you
Click to expand...
Click to collapse
well there is no differences becuase this is the original file this is not modded version of PMP i just post it here so other can try it,,..
well i tested it by my self i install init.d script in it but my phone is still normal not lagging...its even more smooth <-- for me i guess
also battery life improves i test this 3 days ago before i posted this thread here so.. yeah no problem until now..
im using only CM9 B3 by arco no tweaks except this PMP i love this tweaks LOL..
sorry for the bad english...

Yeah i see, So yesterday i flash it again, and my Phone simply freezs all the time and i cant do nothing except force reboot and resto é my backup!
So i have nstaled nstools program runing conservative governator and noop sheduller! Can it be a conflit because of this? Sorry can you tell me what init.d tweaks haver you turn one?
And Just one Last (noob) question, we can turn on tweaks on init.d and build.prop at the same time right?
Thank you
Sent from my GT-I8150 using Tapatalk 2

omid900 said:
Yeah i see, So yesterday i flash it again, and my Phone simply freezs all the time and i cant do nothing except force reboot and resto é my backup!
So i have nstaled nstools program runing conservative governator and noop sheduller! Can it be a conflit because of this? Sorry can you tell me what init.d tweaks haver you turn one?
And Just one Last (noob) question, we can turn on tweaks on init.d and build.prop at the same time right?
Thank you
Sent from my GT-I8150 using Tapatalk 2
Click to expand...
Click to collapse
1. 1st i dont know if they gonna conflict conser. gov. and noop :/
2. in init.d just tick you want to improve or change..
3. yep you can turn on tweaks at the same time
tip dont use GPS fix thingy ex. your rom is for europe firmware and your in asia dont turn it on
might end up on a bootloop just like me (or im missing something well didnt know all the answer)
just dont forget to backup all your files...

omid900 said:
Yeah i see, So yesterday i flash it again, and my Phone simply freezs all the time and i cant do nothing except force reboot and resto é my backup!
So i have nstaled nstools program runing conservative governator and noop sheduller! Can it be a conflit because of this? Sorry can you tell me what init.d tweaks haver you turn one?
And Just one Last (noob) question, we can turn on tweaks on init.d and build.prop at the same time right?
Thank you
Sent from my GT-I8150 using Tapatalk 2
Click to expand...
Click to collapse
you may already installed many app that can interact with hardware. like setcpu, swap or other.
yes you can turn on tweak on init.d and build.prop

Ok guys, yes I have installed nstools, and some others things like acid audio mod and wifix and some others system fonts! So what I did? Wipe everything on my phone, and flash again the cm9 build, and then I have flashed PmR again, and with most of the things, and now I am a happy user again heheh, it's working really good!
So I recommend this thing for at least give it a try
Sent from my GT-I8150 using Tapatalk 2

I need this asap!
How do you guys download things from goo.im?
I tried but it just keep reloading the page and never even start a download...
Can you guys give a mirror?
THe mediAfire mirror isn't workin'...
Dropbox maybE?
Please i need this pretty much BADLY..

TiTAN-O-One said:
How do you guys download things from goo.im?
I tried but it just keep reloading the page and never even start a download...
Can you guys give a mirror?
THe mediAfire mirror isn't workin'...
Dropbox maybE?
Please i need this pretty much BADLY..
Click to expand...
Click to collapse
PMR is out in the playstore as well, try to search for it in the playstore
Sent From Inverted Wonder w/ Xparent ICS Tapatalk

I got it but it does boot loops after I apply and restart the tweaks...
Sent from my GT-I8150 XperiaICE using xda app-developers app

TiTAN-O-One said:
I got it but it does boot loops after I apply and restart the tweaks...
Sent from my GT-I8150 XperiaICE using xda app-developers app
Click to expand...
Click to collapse
One thing you should know, I've tried the flashable version and haven't succeed yet. But I tried the app from Play Store, it works and easier to use

I tried that method and it got me to the bootloop...
Sent from my GT-I8150 using xda app-developers app

work as expected.. :good:
- [ROM][4.1.2] Paranoid Android 2.99 Galaxy W
- [KERNEL] Forfivo kernel Galaxy W KERNEL v2 OC-UV-CFS 06-12-2012
thanks

doesnt work on paranoid jelly bean by camcory, bootloop and app keep fc.

[ROOT/ROM] Deodex Firmware 10.4.2.17 (US/WW) | Insecure kernel | Recovery Menu |

Hi !
For all those who want to use the last update - Officialy Asus Firmware 10.4.2.17 with root access !
Also I made a deodexed version with busybox already installed ! ( see second post ! )
Contains :
insecure kernel 10.4.2.17 ;
su ;
Superuser.apk
init.d support ( activated on kernel ! );
USB debugging already enabled ;
Downloads :
please download the next archive - ( for SKU -> WW )
Root_10.4.2.17.zip - 5.78 MB
please download the next archive - ( for SKU -> US )
Root_10.4.2.17_US.zip
Installation :
update your device to the last Asus Firmware 10.4.2.17 ;
install TWRP recovery ( via fastboot method ) ;
put the downloaded archive on your device !
go to TWRP recovery and choose Install !
Now you have rooted the last Asus Firmware 10.4.2.17 !
regards,
Surdu Petru

Asus Firmware 10.4.2.17 : Stock , Deodexed , Root & Busybox already installed ; ( SKU -> US ) !
Change log :
unmodified android system - Asus firmware 10.4.2.17 US version ;
deodexed ;
rooted ;
busybox alraedy installed ;
init.d enabled to run automatic on every boot - all scripts in init.d directory ;
insecure kernel ;
USB debugging already enabled ;
Download :
File 1° Stock_Deodexed_10.4.2.17_US.zip.001
File 2° Stock_Deodexed_10.4.2.17_US.zip.002
Installation :
to get archive for flash in recovery , please unzip first archive 001 => Stock_Deodexed_10.4.2.17_US.zip ;
put the archive in your device , or via adb : > adb push Stock_Deodexed_10.4.2.17_US.zip /mnt/sdcard
go to TWRP recovery & wipe cache and dalvik-cache ;
choose Install and wait to finish... than just check Reboot !
Recovery & Reboot in Power Off Menu !
Download :
Recovery_Reboot_10.4.2.17.zip - 8.21 MB ( only for deodex rom US ! )
Recovery_Reboot_Odex_10.4.2.17.zip - 8.21 MB (only for stock odex rom SKU -> US ! )
Installation :
> adb push Recovery_Reboot_(Odex)_10.4.2.17.zip /mnt/sdcard ( or place above archive in your device )
go to TWRP recovery and choose Install !
*****************
Asus Firmware 10.4.2.17 : Stock , Deodexed , Root & Busybox already installed ; ( SKU -> WW ) - for European version !
Change log :
unmodified android system - Asus firmware 10.4.2.17 WW version ;
deodexed ;
rooted ;
busybox alraedy installed ;
init.d enabled to run automatic on every boot - all scripts in init.d directory ;
insecure kernel ;
USB debugging already enabled ;
Download :
File 1° Deodex_10.4.2.17.zip.001
File 2° Deodex_10.4.2.17.zip.002
Installation :
to get archive for flash in recovery , please unzip first archive 001 => Stock_Deodexed_10.4.2.17_WW.zip ;
put the archive in your device , or via adb : > adb push Stock_Deodexed_10.4.2.17_WW.zip /mnt/sdcard
go to TWRP recovery & wipe cache and dalvik-cache ;
choose Install and wait to finish... than just check Reboot !
Recovery & Reboot in Power Off Menu !
Download :
Recovery_Reboot_Deodex.zip - 8.45 MB ( only for deodex rom WW ! )
Recovery_Reboot_Odex.zip - 8.46 MB (only for stock odex rom SKU -> WW ! )
Installation :
put archive Recovery_Reboot in your device , or with adb command > adb push Recovery_Reboot_Odex(Deodex).zip/mnt/sdcard ;
go to TWRP recovery and choose Install !
Good luck ! :good:

Good!!!!! Could y I u make the US firmware as well ?
Sent from Chanook 300 using Tapatalk 2

ricardowec said:
Good!!!!! Could y I u make the US firmware as well ?
Sent from Chanook 300 using Tapatalk 2
Click to expand...
Click to collapse
+1

ricardowec said:
Good!!!!! Could y I u make the US firmware as well ?
Sent from Chanook 300 using Tapatalk 2
Click to expand...
Click to collapse
+2
Sent from my ASUS Transformer Pad TF300T

ricardowec said:
Good!!!!! Could y I u make the US firmware as well ?
Sent from Chanook 300 using Tapatalk 2
Click to expand...
Click to collapse
Hi!
Yes, I'll upload also for US ! :good:

surdu_petru
[email protected] and [email protected] firmware will also be upgraded to this version?

BrateloSlava said:
surdu_petru
[email protected] and [email protected] firmware will also be upgraded to this version?
Click to expand...
Click to collapse
Hi!
I really don't know ...I think about if it worth ....
For me I will do, but not sure if I will share with you , because these Custom Roms does not seem to be appreciated !
( as long as they have been downloaded over 500 times ( Clean_Slim&Fast ) - and is appreciated, as you can see only 20 people - I still think about !!! )
Good luck ! :good:

surdu_petru said:
I really don't know ...I think about if it worth ....
Click to expand...
Click to collapse
By the way, is not all your users download the firmware from this server. There must register to download.
That's why I made ​​a copy to other file-sharing server.
According to a survey on the Russian forum 4pda.ru of users TF300, [email protected] is one of the leaders.
I know that many people are changing their firmware (for example, Hydro ROM) to your [email protected]
So, I think part of the Russian-speaking users waiting for new versions of your firmware.

surdu_petru said:
Hi!
I really don't know ...I think about if it worth ....
For me I will do, but not sure if I will share with you , because these Custom Roms does not seem to be appreciated !
( as long as they have been downloaded over 500 times ( Clean_Slim&Fast ) - and is appreciated, as you can see only 20 people - I still think about !!! )
Good luck ! :good:
Click to expand...
Click to collapse
So, because not enough people say thank you you aren't going to update your two biggest contributions? I just now added my thank you but have commented many times in the forum on how good your work is. Ive been running v02 overclock for several weeks and very pleased with it. I don't think its really fair to judge your users just because they don't hit the thank you button. Just my two cents.

pwachleman said:
So, because not enough people say thank you you aren't going to update your two biggest contributions? I just now added my thank you but have commented many times in the forum on how good your work is. Ive been running v02 overclock for several weeks and very pleased with it. I don't think its really fair to judge your users just because they don't hit the thank you button. Just my two cents.
Click to expand...
Click to collapse
Ok! You are right, but do not forghet... do not need money for my roms...
...just to click THANKS I think is not so hard to do! :good:

surdu_petru said:
Hi!
I really don't know ...I think about if it worth ....
For me I will do, but not sure if I will share with you , because these Custom Roms does not seem to be appreciated !
( as long as they have been downloaded over 500 times ( Clean_Slim&Fast ) - and is appreciated, as you can see only 20 people - I still think about !!! )
Good luck ! :good:
Click to expand...
Click to collapse
Can you build something for TF300TG?

Root for SKU US version !
Hi !
I upadated my OP : - now you have Root also for US version !
Thank you for your understanding & please, stay tuned - I'll release soon other updated !!! :good:

surdu_petru said:
Hi !
I upadated my OP : - now you have Root also for US version !
Thank you for your understanding & please, stay tuned - I'll release soon other updated !!! :good:
Click to expand...
Click to collapse
Can you build stock rom for recovert for TF300TG?

**Menos** said:
Can you build stock rom for recovert for TF300TG?
Click to expand...
Click to collapse
Hi !
Yes, do you need just Stock odexed - like official firmware ? - or , deodexed with busybox ?
Today I'll release Stock Firmware 10.4.2.14 SU - deodexed, root & busybox already installed ( ...also with init.d support ! ) - only for TF30T !
Tomorow I can try to build also for TF30TG , if you are interested !

surdu_petru said:
Hi !
Yes, do you need just Stock odexed - like official firmware ? - or , deodexed with busybox ?
Click to expand...
Click to collapse
It would be cool. Just odex, the rest I can do myself.
Thank you so much!
WW version please.

[email protected] is one of my favorite roms. No problems EVER! Fast, Friendly, Reliable, and very Cool looking. Keep up the great work!

moisaal said:
[email protected] is one of my favorite roms. No problems EVER! Fast, Friendly, Reliable, and very Cool looking. Keep up the great work!
Click to expand...
Click to collapse
Hi!
Thank you...for your nice words! :good:

I am confused by the different versions of your ROMs, what in simple terms is the difference between this and JB2 blue for instance?

Seahorse said:
I am confused by the different versions of your ROMs, what in simple terms is the difference between this and JB2 blue for instance?
Click to expand...
Click to collapse
Hi !
This is not a "Rom" ....If you need to root the last update Asus Firmware 10.4.2.17 , you need to flash on recovery this archive ( see first post ! )
I hope you understand now ! Good luck ! :good:

[ROM] Root Stock/Deodex Firmware 10.4.2.18 (US/WW) | Insecure kernel | Recovery Menu

Hi to everyone !
Root Asus Firmware 10.4.2.18 , insecure kernel ... US/WW !
About :
insecure kernel - linux 3.1.10 ;
su binary ;
SuperSU.apk ;
init.d support ( activated on kernel ! ) ;
USB debugging already enabled ;
Google Play Store - updated !
Download :
please download the next archive - ( for SKU -> WW )
Root_10.4.2.18_WW.zip
please download the next archive - ( for SKU -> US )
Root_10.4.2.18_US.zip
Installation :
update your device to the last Asus Firmware 10.4.2.18 ;
install TWRP 2.3.1.0 recovery ( via fastboot method -> fastboot -i 0x0B05 flash recovery twrp.blob ) ;
put the downloaded archive on your device !
go to TWRP recovery and choose Install !
Now you have rooted the last Asus Firmware 10.4.2.18 !
regards,
Surdu Petru

Deodex Firmware 10.4.2.18 ( US/WW ) !
Asus Firmware 10.4.2.18 : Stock - Deodexed - Root & Busybox already installed !!!
About :
unmodified android system - Asus firmware 10.4.2.18 version ;
deodexed ;
rooted ;
SuperSU.apk and su binary up to date ;
busybox alraedy installed ;
init.d enabled to run automatic scripts on every boot !
insecure kernel ;
USB debugging already enabled ;
Google Play Store - up to date !
Download :
SKU -> US : Deodex_10.4.2.18_US.zip
Deodex_10.4.2.18.US.zip.001
Deodex_10.4.2.18.US.zip.002
SKU -> WW : Deodex_10.4.2.18_WW.zip
Deodex_10.4.2.18.WW.zip.001
Deodex_10.4.2.18.WW.zip.002
Installation :
to get archive for flash in TWRP recovery , please unzip first archive 001 => Deodex_10.4.2.18_US/WW.zip ;
put the archive in your device , or via adb : > adb push Deodex_10.4.2.18_US/WW.zip /mnt/sdcard
go to TWRP recovery & wipe cache and dalvik-cache ;
choose Install and wait to finish... than just check Reboot !
Now, you have Stock Deodexed Rom - from last Asus Firmware 10.4.2.18 installed in your device !
regards,
Surdu Petru

Recovery Menu ! Firmware 10.4.2.18 ( US/WW )
Recovery & Reboot in Power Off Menu !
Download for Stock ( odexed) Rom :
Recovery_Reboot_Odex.zip ( SKU -> WW ) !
Recovery_Reboot_Odex_US.zip ( SKU -> US ) !
Download for Deodexed Rom :
Recovery_Reboot_Deodex.zip ( SKU -> WW ) !
Recovery_Reboot_Deodex_US.zip ( SKU -> US ) !
Installation :
put archive Recovery_Reboot_Odex/Deodex.zip in your device , or with adb command > adb push Recovery_Reboot_Odex(_US)/Deodex(_US).zip /mnt/sdcard
go to TWRP recovery and choose Install !
regards,
Surdu Petru

Can I install this over a custom room. ?

Awaiting that beloved recovery power menu mod for this build
Sent from my ASUS Transformer Pad TF300T using xda app-developers app

I flashed the US zip file per your directions and it worked perfectly. Much appreciated.

flipflargin said:
I flashed the US zip file per your directions and it worked perfectly. Much appreciated.
Click to expand...
Click to collapse
Hi!
Ok, thanks ...
Today I'll upload also deodexed version and recovery power off menu ! :good:

Hi !
...finally I managed to upload all the stuff :good:
Thanks for your time !

surdu_petru said:
Hi !
...finally I managed to upload all the stuff :good:
Thanks for your time !
Click to expand...
Click to collapse
It is us that thank you for your time my friend.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
---------- Post added at 04:26 PM ---------- Previous post was at 04:02 PM ----------
Well sorry to tell you, but the odex recovery menu mod sent mine into a loop. I had to recover to previous version to restore.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app

May i install upon your .17 US previous fw (and also the Rebooter) without wiping cache and dalvik?

spino1970 said:
May i install upon your .17 US previous fw (and also the Rebooter) without wiping cache and dalvik?
Click to expand...
Click to collapse
Hi !
Normally, sure you can ....
- but to prevent any unexpected forcing closed ( FC ) app , my advice is to wipe cache and dalvik-cache before installing any update !
( by wipeing cache and dalvik-cache you will not lose your settings in your device ! ).
Good luck ! :good:

Thanks a lot mate, works like a charm

The file downloads with the .001 file tag after the zip and won't decompress. If I take away the .001 and try to decompress then its empty. Any thoughts?
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2

corwest said:
The file downloads with the .001 file tag after the zip and won't decompress. If I take away the .001 and try to decompress then its empty. Any thoughts?
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Hi!
...please, copy the both archive .001 & .002 in the same directory, and now try to unzip the first archive
.001 with 7zip ! , sure you will find after that archive.zip!
Good luck! :good:

bigsatan said:
Thanks a lot mate, works like a charm
Click to expand...
Click to collapse
The same here... thumbs up for surdu!

surdu_petru said:
Hi!
...please, copy the both archive .001 & .002 in the same directory, and now try to unzip the first archive
.001 with 7zip ! , sure you will find after that archive.zip!
Good luck! :good:
Click to expand...
Click to collapse
Haha should have figured that. Thanks mate.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2

ASUS .18?
surdu_petru said:
Hi to everyone !
Root Asus Firmware 10.4.2.18 , insecure kernel ... US/WW !
Is this a stock ASUS .18? Altered by you?
I ask as I do not see that update anywhere for this tablet - unless of course it's RIGHT under my nose.
I have TWRP 2.3.1.0
V4.1.1
Build 10.4.2.17
Click to expand...
Click to collapse

10.4.2.18 is the latest, released within the past 2 weeks, should be on the Asus site as that's how I updated.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app

funnel71 said:
It is us that thank you for your time my friend.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
---------- Post added at 04:26 PM ---------- Previous post was at 04:02 PM ----------
Well sorry to tell you, but the odex recovery menu mod sent mine into a loop. I had to recover to previous version to restore.
Click to expand...
Click to collapse
Ever figure that out?

Delete

[Kernel][CM 10.1][ION+PMEM] KhaN Kernel 3.4.82 ( 04.03.2014 )

I don't use cm 10.1 but a lot of forum members asked for it so I decided to compile one. I hope you like it.
A kernel for CyanogenMod 10.1 BETA (Build 3)
FEATURES
*Kernel 3.4.82
*Build with Linaro GCC 4.7.4 2014.01 toolchain by Christopher83
*O3 Optimization
*Overclock up to 1.8 GHz
*CPU voltage control VDD sys interface
*Lowered display panel voltage
*Lowered wifi voltage
*Lowered vibetonz voltage
*Fixed 100% battery notification after charger unplug
*Fast Charge support
*Battery Life eXtender support
*Increase audio loudness
*Increased cpu freq.on boot
*Con Kolivas' CK3 Tweaks
*Fast Random generator (frandom) support
*Dynamic management of dirty page writebacks
*Dynamic management of the minimal slack
*Dynamic file sync
*Dynamic read-ahead
*LowMemoryKiller management of not killable processes
*Lowered swappines
*362Mb Ram
*Governers : adaptive, conservative, lulzactive, interactive, interactiveX, ondemand, ondemandX, powersave, smartassV2, lionheart, performance
*I/O schedulers : noop, vr, sio, row, cfq, bfq, fiops
INSTALLATION GUIDE
Reboot To Recovery Mode
Flash the kernel
Wipe Cache & Dalvik Cache
Reboot System
CREDITS
arco68
Christopher83
educk
madridii
arsradu
and all github users for their commits
<< DOWNLOAD >>
Code:
You can use [URL="http://forum.xda-developers.com/showthread.php?t=2401988"][COLOR="DeepSkyBlue"][U]Performance Control[/U][/COLOR][/URL] to edit all features.
CHANGELOG:
v1
-initial release
Click to expand...
Click to collapse
XDA:DevDB Information
[Kernel][CM 10.1][ION+PMEM] KhaN Kernel 3.4.82 ( 04.03.2014 ), a Kernel for the Samsung Galaxy W I8150
Contributors
lafactorial
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: v1
Beta Release Date: 2014-03-04
Created 2014-03-03
Last Updated 2014-03-11

Wew another CM10.1 kernel, download & test it.. thanks sir :thumbup:

Thanks for upload!
Does it supports turbo boost mod?

can i use on miuiv5[ion+pmem]

@lafactorial , thanks for the update sir. It's feel more smooth. also i can add some int.d tweak.

My brother @lafactorial
Firstly, thanks for the great effort.
I have a question.
This kernel cm 10.1 used with beta2?
I wish you continued success.
Very very thank.

I think it works you can try and thanks for your good wishes @ali7557
Sent from my GT-I8150 using XDA Premium 4 mobile app

BarboZ said:
Thanks for upload!
Does it supports turbo boost mod?
Click to expand...
Click to collapse
Yes you can try.
İstanblue said:
can i use on miuiv5[ion+pmem]
Click to expand...
Click to collapse
I think no.

Thanks for your effort.

lafactorial said:
IMPORTANT NOTE : If it stucks at android is upgrading screen just restart the phone.
Click to expand...
Click to collapse
nothing to do... it stops at "android is uprading" screen first time I boot after kernel installation; then, after reboot, phone stops at CyanogenMod start screen...
back to stock kernel

BarboZ said:
nothing to do... it stops at "android is uprading" screen first time I boot after kernel installation; then, after reboot, phone stops at CyanogenMod start screen...
back to stock kernel
Click to expand...
Click to collapse
Report! Mine does too!
~edit: I searched, it is for beta 2, right?

aspakrian said:
Report! Mine does too!
~edit: I searched, it is for beta 2, right?
Click to expand...
Click to collapse
First post says it's for beta3

Dear friends and @lafactorial
İnformation
Beta 2-based sambean does not work.
Thanks.

BarboZ said:
nothing to do... it stops at "android is uprading" screen first time I boot after kernel installation; then, after reboot, phone stops at CyanogenMod start screen...
back to stock kernel
Click to expand...
Click to collapse
aspakrian said:
Report! Mine does too!
~edit: I searched, it is for beta 2, right?
Click to expand...
Click to collapse
Installation guide for those who are getting stuck at android is upgrading screen :
INSTALLATION GUIDE
Reboot To Recovery Mode
Flash the kernel
Wipe Cache & Dalvik Cache
Reboot To Recovery again
Reboot System
If you still stuck at starting apps screen wait 1 or 2 minutes then restart phone. I don't know the reason but I can boot in that way.
I think everything will be Ok then.

lafactorial said:
Reboot To Recovery Mode
Flash the kernel
Wipe Cache & Dalvik Cache
Reboot To Recovery again
Reboot System
If you still stuck at starting apps screen wait 1 or 2 minutes then restart phone. I don't know the reason but I can boot in that way.
I think everything will Ok then.
Click to expand...
Click to collapse
I tried this way but my phone behaves the same I described before

BarboZ said:
I tried this way but my phone behaves the same I described before
Click to expand...
Click to collapse
Are you using beta 3 ?
Sent from my GT-I8150 using XDA Premium 4 mobile app

BarboZ said:
I tried this way but my phone behaves the same I described before
Click to expand...
Click to collapse
I can boot. Here is the screenshot...

lafactorial said:
Are you using beta 3 ?
Click to expand...
Click to collapse
Yes, of course.

jglory said:
I can boot. Here is the screenshot...
Click to expand...
Click to collapse
What rom are you using?
Inviato dal mio GT-I8150 utilizzando Tapatalk

Fİxed!
I think it is fixed now.Please redownload the kernel and flash it normally.