Develop Bugs

[ROM][SPRINT][CDMA][12.03.2011] - etvROM - based on EF17, CM7, and others

Features/Info:
- Gingerbread
- Debloated and snappy
- Clockworkmod recovery
- Rooted
- Touchwiz
- Latest Superuser, Terminal Emulator
- Infrastructure mode WIFI tether (use Galaxy S or Epic 4G profile)
- Ad-hoc wifi connectivity
- Email, SMS, and other apps from Mainline CM7
- Everything works, designed to be a daily driver
- Other small improvements
Instructions:
- Direct download here: www.evanvaughan.com/filesvc.aspx?fileid=F91F7142F7FB4E4B (MD5 checksum: 17bd976c28226adebf17b0a2df00f29a)
- Flash with Heimdall (included in zip). If you're coming from an earlier version of etvROM you can flash only the factoryfs component. This will keep your apps and settings intact.
- If you did a full flash and not just factoryfs: When flash is complete, Tab will reboot into recovery. You need to wipe data/cache, and reboot. If you only flashed factoryfs, Tab will reboot and you'll be ready to roll.
DISCLAIMER: I did not write any code for this ROM. It's sourced from EB17, CM7 Mainline, and other places. All I did was put everything together into a Heimdall flashable package because there were no ROMS out there for the Tab that had what I wanted. I don't deserve any credit for this; it's mostly the work of other people.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

is there only English language in this rom?

nobz said:
is there only English language in this rom?
Click to expand...
Click to collapse
English and Spanish.

Got any screenshots?

surheeho said:
Got any screenshots?
Click to expand...
Click to collapse
I'll try to get some up tomorrow. I didn't really modify the appearance much (yet) so visually everything resembles a stock EF17 build except for the several AOSP style apps pulled in from CM7.
If anyone flashes this let me know, I tested it pretty thoroughly but am curious to see how it works for others.

uh oh...the Sprint ROMS are coming out the woodwork!!!!!!!!!!!! wh0o0o0o
Downloading and flashing. Currently im using the initial contact rom. Will compare and contrast momentarily =)
Thanks!
---------- Post added at 08:02 AM ---------- Previous post was at 07:07 AM ----------
not to be mean or anything, but i sort of had this problem with the initial contact rom.
I dont see any differences... I tried flashing twice. Wipe data/cache/ reboot.(actually 3x - just for good measure) it had a cool anti sprint boot logo...but other than that, it was the same ol same ol.
yes it is snappy and rooted, but i got the same effect after converting to EXT4.
you said that you have elements of different stuff (ie CM7). I didn't see anything CM7 in particular. Am i doing something wrong?
thanks again!

lazeballz said:
uh oh...the Sprint ROMS are coming out the woodwork!!!!!!!!!!!! wh0o0o0o
Downloading and flashing. Currently im using the initial contact rom. Will compare and contrast momentarily =)
Thanks!
---------- Post added at 08:02 AM ---------- Previous post was at 07:07 AM ----------
not to be mean or anything, but i sort of had this problem with the initial contact rom.
I dont see any differences... I tried flashing twice. Wipe data/cache/ reboot.(actually 3x - just for good measure) it had a cool anti sprint boot logo...but other than that, it was the same ol same ol.
yes it is snappy and rooted, but i got the same effect after converting to EXT4.
you said that you have elements of different stuff (ie CM7). I didn't see anything CM7 in particular. Am i doing something wrong?
thanks again!
Click to expand...
Click to collapse
If you have a different boot animation it probably flashed fine. Also the build number in About should be EVAN.GB.V6. And if you open Email or MMS it should be an AOSP-style app (taken from CM7) rather than the clunky apps included from the vendor. Also, you should be able to boot into Clockworkmod recovery and the wallpaper should have been different. If you have all this stuff I would say the flash went fine. Like I said, I didn't do any work as far as theming goes. My goal with this package was to get something out there that's flashable, functional, and lightweight. This is just a start that I can build on as I learn more.

Sweet deal, grats on your steps to becoming a full fledged dev!

New version uploaded along with some screenshots.

etvaugha said:
New version uploaded along with some screenshots.
Click to expand...
Click to collapse
Can you add Russian lang to your Rom? It will be good for Russian users

Is this missing a boot.bin file? I'm kind of unfamiliar with heimdall.

Can you add chinese lang to your Rom? It will be good for chinese users
Thx

Hey dude, possible to re-up this into a CWM-flashable file?
Heimdall is not my friend apparently.

severedembrace said:
Is this missing a boot.bin file? I'm kind of unfamiliar with heimdall.
Click to expand...
Click to collapse
Boot.bin doesn't need to be flashed. Just plug in the included 6 files and leave the remaining fields blank. Did you install the driver with the Heimdall driver utility?
The next release I will make a TAR or CWM-flashable package. I tried to make a TAR for this release but Odin didn't like it. I must have done something wrong.

etvaugha said:
Boot.bin doesn't need to be flashed. Just plug in the included 6 files and leave the remaining fields blank. Did you install the driver with the Heimdall driver utility?
The next release I will make a TAR or CWM-flashable package. I tried to make a TAR for this release but Odin didn't like it. I must have done something wrong.
Click to expand...
Click to collapse
Ah ok. For some reason it wouldn't initiate until I plugged something in to the boot field.
I soft bricked because of my inexperience. Got the death screen.
Odin saved the day though.

[UI] GN Fastboot Flasher[v1.5.0][27/7]

I'm proud to present you the GN Fastboot Flasher (GNFF)
I love the simplicity and the convenience of Odin, but it's close source and also there a few files to flash with Odin. So I decided to create an Odin-like app, but for using with fastboot.
Remember that this app is in Beta stage may not be a complete and safe way of flashing. By using this software, you accept its danger.
This app only works on Windows. I have no plan to distribute it to Linux/Mac. The reason is clear, I know nothing from coding on Linux/Mac .Also I'm sure there are lots of work to do in the windows version.
GNFF Functions:
Flashing boot.img, zImage, zip file containing zImage
Flashing radio, bootloader, recovery, system
Flashing stock image files (.tgz)
Flashing stock image files automatically by downloading from Google servers
To do:
Add other options, like unlocking bootloader - Done
Make logging better and complete - Done
Add other languages
Bugs:
You say!
Changelog:
Version 1.5.0:
Fixed image downloading problem.
Added ability to update the program(Wait till the next version).
Added a part named "Addons".
Added ability to unlock/lock the bootloader.
Added Console to execute commands using adb and fastboot.
Some aesthetic changes.
Added support for JB ROMs.
Now you can inter "Custom" for your current ROM, and GNFF will download and install the latest official ROM.
Added a button to clear the log.
New icon.
Added abiliy to use drag & drop for flashing files.
Adding ability to use "open with..." for flashing files
Version 1.0.2:
Added an option to download and flash stock images from Google servers
Added an option to reboot to bootloader
Fixed the bug that was causing the log part don't be scrollable
Now GNFF doesn't let stop the flashing progress using repressing "Start" button
Version 1.0.1:
Added bootloader control, now it doesn't flash anything on devices with locked bootloader.
Added zImage control, now it gives an error in the log section when the zip file doesn't contain a zImage.
Added some more log informations.
Version 1.0.0:
Initial version
Sources:
To be honest, I'm not pro in using Git and publishing open source apps. Anyway I pushed them to github. You can compile them using AMS.
https://github.com/sinamosavi/flasher
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads:
ExpressLeech - HipFile
Very important note: I have not signed this program with a Microsoft Certificate. So some antivirus programs "may" know it as a malware. If they deleted/quarantined it, restore the file and don't let them scan it again.
If you liked this program, please rate the topic as 5 star and press "Thanks" button.

Reserved for FAQ...

looks interesting. looking forward to test it out later

It seems a good idea, good work, carry on

Added 1.0.1 version to the first post. Enjoy!

I have no need to use this at the moment so won't try it. It looks very good though and I hope you keep up the development.

Super cool idea. So we can use this app to install latest stock images from Google. Could we install also Cwm images ( is this the recovery part)?
Sent from my Galaxy Nexus

albsat said:
Super cool idea. So we can use this app to install latest stock images from Google. Could we install also Cwm images ( is this the recovery part)?
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
Yes.
That option is for flashing recovery image files.

I think the potential for this app is really great. It could be used for senarios like:
1) Unlock bootloader
2) update image
3) install an image with root
etc...

albsat said:
I think the potential for this app is really great. It could be used for senarios like:
1) Unlock bootloader
2) update image
3) install an image with root
etc...
Click to expand...
Click to collapse
Yes. I will add this features soon, but now I prefer to focus on fixing bugs rather than adding features.
Also, I didn't catch what you mean about update image.

sinamosavi said:
Yes. I will add this features soon, but now I prefer to focus on fixing bugs rather than adding features.
Also, I didn't catch what you mean about update image.
Click to expand...
Click to collapse
I meant update image (by downloading a google image directly).
Sent from my Galaxy Nexus

Unfortunately ALL of the USB ports of my laptop are broken since yesterday. So I cannot test anything and you may see a lot of errors in this build. However 1.0.2 is ready and you can download it from the first post. Enjoy!

Looks good! Great Job Sina
Thank you

Bumping this thread. Any further development?

albsat said:
Bumping this thread. Any further development?
Click to expand...
Click to collapse
Fortunately, yeah.
Since last month, I was working to fix all the bugs and make GNFF fully stable. Now I think I have done it. I hope you enjoy this software.

is there already an option to show the Gnex's current version of bootloader / firmware / baseband etc etc?
By the way nice work there.

this app is great but how to use it ?
i tried many time but the app said my phone wasn't connected,
but it shown connected in android.
please release the tutorial mate.

kickthefreak said:
this app is great but how to use it ?
i tried many time but the app said my phone wasn't connected,
but it shown connected in android.
please release the tutorial mate.
Click to expand...
Click to collapse
Have you installed adb drivers ? If not that's the issue . Boot in to bootloader ( power off the device - press volume up + down + power button ) then it'll ask for adb drivers . You can find the gnex adb drivers from googling .
After installing drivers , you are good to go .
.. Beamed Directly Via GNEX ..

file is no longer available...

Awesome dude!
Sent from my Galaxy Nexus using xda app-developers app

[JB] - [ROM][ODIN][TAR]SPH-D710 FJ10 (FJ10 Kernel/ROM)

First off, a huge thanks to sextape for this JB FJ10 leak!
Second, a huge thanks goes to Garwynn for helping me compile all of these one-clicks! It's a lot of work to do all of them and it would take MUCH longer without him.
Thanks also goes to sfhub (for teaching me how to create Odin One-Click.exe files and creating the original thread I'm using as a template for this one), Agat63 (for helping me get the hang of what sfhub started teaching me), chris41g (for hosting all my work here and with the Modem and Kernel Repositories), and to everyone else in our community who makes this possible!
This JB build is a VERY early Alpha engineering build and is not meant to be used as a daily driver. There is no Modem included in the TAR.
Currently there are several features that do not work (including 3G) but at least we know that Samsung is working on a JB build for us!
There will not be a one-click.exe for this JB build. It can only be flashed in Odin. If flashing this be sure to put the included CSC file in the CSC slot in Odin. If you don't the flash will most likely fail.
Instructions
1) Backup your phone with a Nandroid and TB (or other backup app).
Your phone will lose ALL data during the flash process. It is highly recommended to store your backup on a removed SDcard or on a PC.
2) Install Samsung USB/Android drivers (if not already installed). [USB/Android]
3) Download the FJ10 Stock JB ROM.
FJ10-Unencrypted.7z (Resets all data)
4) Unzip the TAR and CSC files using 7zip (this package is a self-extracting exe you should just be able to double-click on it after download and it will do the rest).
5) Start Odin.
Select PDA and Navigate to the location where the FJ10 TAR was saved upon extract from the 7Zip archive.
Select CSC and Navigate to the location where the FJ10 CSC file was saved upon extract from the 7Zip archive.
6) Place phone in Download Mode.
Power down phone.
Wait for capacitative button lights to turn off.
Simultaneously Press and Hold [Power]+[Volume Down] until confirmation screen appears.
Press [Volume Up] to enter Download mode.
7) Connect USB cable to PC and phone.
Wait for Odin to recognize the phone.
8) Start Odin flash process.
Press [Start].
9) Complete - PASS!
Status should change to green PASS! At this point your phone should automatically reboot.
The boot process will take slightly longer than usual during which time you'll see the Sprint 4G logo screen.
Congratulations you're on FJ10!
XDA:DevDB Information
[ROM][ODIN][TAR]SPH-D710 FJ10 (FJ10 Kernel/ROM) , ROM for the Samsung Epic 4G Touch
Contributors
rwilco12
ROM OS Version: 4.2.x Jelly Bean
Version Information
Status: Stable
Created 2015-02-19
Last Updated 2015-02-19

Additional Resources:
7-Zip v9.20
Odin3 v3.04
ZArchiver
Mobile Odin Lite
Samsung E4GT USB Drivers

Reserved.

This thread was originally located at Sextape's forum but due to several issues involving other sites stealing his work it was shut down. We have received permission to post the thread here now for XDA members.

Awsoome
Sent from my SPH-D710 using xda app-developers app

Sad to hear about sxtp do you know what CSC stands for?

rovar said:
Sad to hear about sxtp do you know what CSC stands for?
Click to expand...
Click to collapse
Criminal Sexual Conduct... LOL
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

damn punk-a** sites no respect, thx for all the hard work team sextape

deleted

rovar said:
Sad to hear about sxtp do you know what CSC stands for?
Click to expand...
Click to collapse
Carrier specific code(content).

Delete I thought I read Fj17 lol! Still awesome thank you!!

OOoooohhhhh Meow Gusta!
Thanks for the hard work you guys! If it weren't for you, we'd be an Apple Product.

So any word on when this might be nearing completion? Either from Samsung or any devs trying to work on it?

psych0r3bel said:
So any word on when this might be nearing completion? Either from Samsung or any devs trying to work on it?
Click to expand...
Click to collapse
Haha no. Knowing Samsung though, it's going to be awhile.
Sent from my SPH-D710 using Tapatalk 2

any list of what works and what doesn't?

psych0r3bel said:
So any word on when this might be nearing completion? Either from Samsung or any devs trying to work on it?
Click to expand...
Click to collapse
I've heard rumors of December but i really think that's unlikely considering how long ICS took and then again the amount of work left to do on this JB build.

Warboy said:
any list of what works and what doesn't?
Click to expand...
Click to collapse
This is a port of the International GS2 so its mostly working, just missing a few things. The biggest thing now is that it wipes all your NV and EFS data, effectively disabling 3G and a few other Sprint features.

Warboy said:
any list of what works and what doesn't?
Click to expand...
Click to collapse
Its prolly all here.. http://forum.xda-developers.com/showthread.php?t=1932146
Aw.. that's FJ05.. never mind..
sj
Sent from my pimped out E4GT on JB-AoKPm1 using [email protected] Pro 2.4.1

rwilco12 said:
This is a port of the International GS2 so its mostly working, just missing a few things. The biggest thing now is that it wipes all your NV and EFS data, effectively disabling 3G and a few other Sprint features.
Click to expand...
Click to collapse
Do you happen to know if sextape is still going to be a major player in the community that still needs him and will respect him?

ashmiller said:
Do you happen to know if sextape is still going to be a major player in the community that still needs him and will respect him?
Click to expand...
Click to collapse
There's always the possibility but it still remains to be seen.

[GUIDE] SU640 ROOT, RECOVERY and KDZ FLASHING

This is not my work, all credits goes to mr. devcon69.
Original Site
- THIS IS INTENDED FOR LG OPTIMUS LTE (SU640) ONLY. PLEASE DON'T TRY ON OTHER LG OPTIMUS LTE VARIANTS.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- I'M NOT LIABLE FOR ANYTHING THAT MIGHT HAPPEN TO YOUR DEVICE. DO AT YOUR OWN RISK.
- PLEASE USE A LAPTOP OR A PC WITH A BACKUP POWER SUPPLY IF POSSIBLE TO AVOID HARD BRICKING YOUR PHONE IN CASE OF POWER FAILURE.
- AVOID USING CHEAP USB CABLES, USE THE ORIGINAL LG CABLE.
- I saved the tutorial for customizing the LG OPTIMUS LTE (SU640) as a PDF document.
- All the applications and the PDF tutorial are included in the zip file.
TUTORIAL AND COMPLETE FILES: (Use Winrar/Winzip to extract files)
[Tutorial deleted, please use the old method at the end of this post or follow this one] We'll wait for mr. devcon69 for update. Sorry guys.
V30C JELLYBEAN FIRMWARE:
Mirror 1:
Mirror 2:
Mirror 3:
V30C_00.kdz MD5: E6EEA12AA5D164AC053203EC03A12AEA
After downloading the file run Md5Checker from the DRIVERS folder. Click Add and browse for the V30c_00.kdz file to verify the MD5 Checksum.
If it's different from the MD5 posted above then the downloaded file might be corrupted or incomplete.
Redownload the file. Use a download manager for faster downloading.
Click to expand...
Click to collapse
CUSTOM ROMS:
1. SU640 V30C ROM by TNT V3
Download: <click here for link>
Credits to tedofu_katozi and TNT Team
Based on Stock Jellybean V30c.
Can be used as daily driver
No SMS Limit
USSD Working
Qslide Available
Fixed bugs from v2
2. SU640 CyanogenMod (CM9/CM10)
Link
GAPPS (GOOGLE APPLICATIONS)
Flash after installing Cyanogenmod. Choose the right package please.
DON'T DO ANY WIPES AT ALL.
ICS/CM9: Link
JB/CM10: Link
Click to expand...
Click to collapse
3. GFAN.COM ROMS (Use google translate and register to the site to access all ROMS).
Link
4. TINHTE.VN ROMS (Use google translate)
Link
Link
5. Some other ROMS and stuffs
Link
To set english as default language on GFAN.COM & TINHTE.VN ROMS:
Open the rom/zip file on your PC with Winrar/Winzip. Open "system" folder and look for the "build.prop" file.
Extract the file and open with notepad or any text editor.
Look for these lines:
ro.product.locale.language=xx
ro.product.locale.region=XX
replace with
ro.product.locale.language=en
ro.product.locale.region=US
Save the file and place it back on the archive. DONE!
In case that the system folder is in "img" format (system.img). Search for ways to extract and edit android img files and how to recompile them.
Click to expand...
Click to collapse
***************************** CREDITS TO ALL THE VIETNAMESE & CHINESE DEVELOPERS *******************************
Click to expand...
Click to collapse
APN SETTINGS FOR GLOBE/TM/SMART/SUN (For Philippines only)
If you're not receiving any settings for your networks GPRS/3G/Mobile Internet configuration then download the file below and flash with CWM.
Don't do any wipes at all.
APN Settings for CWM: <click here for link>
After a successful flash. Go to Settings> More > Wireless & Networks > Mobile Networks > Access Point Names and Select desired setting.
Click to expand...
Click to collapse
DOWNLOAD MODE TROUBLESHOOTING:
If you have problems with booting to download mode.
TURN OFF the device, remove and reinsert the battery. Don’t turn on yet, hold VOLUME UP BUTTON THEN connect to your PC.
Click to expand...
Click to collapse
In case of a bootloop or if the device gets stuck on the bootscreen after a successful flash with stock firmware. Just hold power button to turn off the device, if it doesn't turn off remove the battery instead. Insert the battery to do a FACTORY RESET. Same as booting to CWM Recovery on custom rom.
(Press and hold Volume Down Button + POWER Button. Wait until a FACTORY HARD RESET prompt is displayed then release. Press POWER button TWICE to confirm FACTORY RESET)
Click to expand...
Click to collapse
IN CASE YOU'RE HAVING PROBLEMS WITH THIS METHOD TRY THE OLD ONE HERE:
TUTORIAL AND COMPLETE FILES: (Use Winrar/Winzip to extract files)
Mediafire
Mirror 2: GDrive
Mirror 3: FileFactory
V10i GINGERBREAD FIRMWARE:
Mirror
Mirror 2: GDrive
Mirror 3: Mediafire
(Join the files with HJSPLIT. A "V10i_00.kdz" file will be created)
Part 1
Part 2
Part 3
Part 4
Part 5
Click to expand...
Click to collapse
---------------------------------------------------------------------------------------
If you experience FC/not responding/errors on flashing the KDZ file TRY THIS METHOD.

Lg Nitro HD(P930/P935) rom ported for Su640
Thanks man! this is a precious guide. i used and successfully flash Cm9 on my phone!
i am just wondering if there is any At&T or Bell's rom ported for SU640 as i got one for LU6200 here
http://forum.xda-developers.com/showthread.php?t=1859922
thanks in advance, hope you will help me out!
GBU :good:

Re: [GUIDE] SU640 Rooting and CWM Recovery
I don't know if there's one, have you tried searching on other sites? I think there's a method where you will have to flash baseband.img in order to install roms for p93x. I didn't try, I'm happy with miui. and I'm not sure about the method.

well thanks! i will search that. thanks for help

help
ok brothers i have done every thing fine i succesfully instaled custom rom on it but after one day i wanted to change the rom so i made backup of it and since then .I HAVE MESSED UP AND I DONT KNOW WHAT TO DO I INSTALLED THE ROM AND MADE BACKUP OF IT THROUGH RECOVERY AND NOW AFTER THAT WHEN I REBOOT MY LG SU640 IT STARTS BUT AFTER COMPLETLY OPENING WHEN I UNLOCK THE LOCK SCREEN IT HANGS AND RESTARTS AND SAME SAME AGAIN AND AGAIN. I REINSTALLED THE ROM ClEARED EVERYTHING AND REINSTALLED THE ROM STILL THE PROBLEM PRESIST.... GOT ANY IDEAS BROTHER? I TRIED ANOTHER ROM ALSO ON IT AND STILL THE SAME PROBLEM...

Re: [GUIDE] SU640 Rooting and CWM Recovery
That's weird. Have you wiped the device? Wipe data, cache, and dalvik?

Re: [GUIDE] SU640 Rooting and CWM Recovery
Danial Ahmad said:
ok brothers i have done every thing fine i succesfully instaled custom rom on it but after one day i wanted to change the rom so i made backup of it and since then .I HAVE MESSED UP AND I DONT KNOW WHAT TO DO I INSTALLED THE ROM AND MADE BACKUP OF IT THROUGH RECOVERY AND NOW AFTER THAT WHEN I REBOOT MY LG SU640 IT STARTS BUT AFTER COMPLETLY OPENING WHEN I UNLOCK THE LOCK SCREEN IT HANGS AND RESTARTS AND SAME SAME AGAIN AND AGAIN. I REINSTALLED THE ROM ClEARED EVERYTHING AND REINSTALLED THE ROM STILL THE PROBLEM PRESIST.... GOT ANY IDEAS BROTHER? I TRIED ANOTHER ROM ALSO ON IT AND STILL THE SAME PROBLEM...
Click to expand...
Click to collapse
Ate you sure that the rom you installed is for su640?. Installing ROMs for p93x is incompatible with our device. Make sure that the developer of the rom states that its compatible for su640.

well thanks! i will search that. thanks for help

Dear expressions104!
TUTORIAL AND COMPLETE FILES links are dead.
Is it possible that you may re-upload the files.
Looking forward.

Links are up..

Thanks OP!
This made my life easy.

Thread updated! Links are up!
..

expressions104 said:
Links are up..
Click to expand...
Click to collapse
burahin mo n to pre, pra sating mga pinoy lang to eh.. tsk tsk

Hindi naman po masama mag share sir. Buburahin ko lang po ito pag kailangan ng burahin. Plus meron po akong permission from mr. Devcon69 na irepost dito sa xda ung thread.

Thanks for the guide but i have a problem.
I cant install CWM recovery. Tried it two times but to no avail. The tutorial states that CWm is installed adn then it doesnt boot into CWM.
The device rooted succesfully though.
Any solution?

Vol down + power button doesnt take you to recovery? Have you tried rebooter?
In case cwm is not installed try it once again. If it has the same result try the OLD METHOD.

rooting and cwm recovery
Arhum1994 said:
Thanks for the guide but i have a problem.
I cant install CWM recovery. Tried it two times but to no avail. The tutorial states that CWm is installed adn then it doesnt boot into CWM.
The device rooted succesfully though.
Any solution?
Click to expand...
Click to collapse
it simply means that your mobile is not rooted properly.thats why mobile not rebooting to cwm.
kindly root the mobile properly.if it again gives error , tell me

Attach a picture of the rooting guide after that it takes five minutes until the tutorial states that it is booting into CWM which it doesnt. I tried using rebooter to boot into CWM but using that i stumble upon a dead android with a exclamation mark over its stomach after the phone shuts down and tries to reboot into CWM.
Any solution?. And i updated my phone thorough LG software for the jellybean update.

Hi Guys, I'm currently on Custom PACROM and I'd like to try this Rom. Do I need to Flash this through LG Flash software? or I can just flash this through recovery?

Bootloop on SU640 V30C ROM by TNT V3
hey im having bootloop on that rom. ive done clean wipes but still bootlooping.
is it me whos doing wrong?

[CWM Flashable] Does not work, modem and non-hlos.

Its not possible to flash these files thru cwm, yet... Thanks to all those who tried to help.
Click here for MDL Modem Odin Flashable thanks to @mrvirginia.
These are untested so I don't know if they work. If you're brave enough and don't mind odin flashing back to stock in case something goes wrong, here they are. * I am not responsible for anything that may occur other than the desired effect. *
The partitions are correct. modem.bin goes to the "mdm" partition ("/dev/block/mmcblk0p2") and NON-HLOS.bin > "apnhlos" ("/dev/block/mmcblk0p1"). According to GS4.pit (I believe) these are where the files go.
MK2_MODEM_signed.zip = modem.bin
MD5: FBFCF18A1A9F5C64F7EED6EF328D5680
MK2_WIFI_FIX_signed.zip = NON-HLOS.bin
MD5: 9D967E0B22AB14CCF58E7E18713B7C8C
Flash thru custom recovery. Let us know how it goes.
Thanks to user @j_r0dd for sharing with the community. ->> http://forum.xda-developers.com/showpost.php?p=47865459&postcount=62

Tried to flash but still showing MDL. Check my build.prop to make sure it said jfltetmo hoping there was a check at the install.. any ideas? Running latesthyperdrive

If I wouldn't have flashed them via odin later i would have given this a try...... This deff makes people life easier

jordin1128 said:
Tried to flash but still showing MDL. Check my build.prop to make sure it said jfltetmo hoping there was a check at the install.. any ideas? Running latesthyperdrive
Click to expand...
Click to collapse
did it error out or did it complete the flash?
Currently it uses package_extract to a /tmp dir then extracts the bin to the proper partition. Anyone expireced enough to know if its ok to "write_raw" to the partition like with a kernel?
Code:
assert(package_extract_file("Omnifarious/modem.bin", "/tmp/modem.bin"),
write_raw_image("/tmp/modem.bin", "/dev/block/mmcblk0p2"),
delete("/tmp/modem.bin"));
and
Code:
assert(package_extract_file("Omnifarious/NON-HLOS.bin", "/tmp/NON-HLOS.bin"),
write_raw_image("/tmp/NON-HLOS.bin", "/dev/block/mmcblk0p1"),
delete("/tmp/NON-HLOS.bin"));
Can I change it to:
Code:
assert(write_raw_image("Omnifarious/modem.bin", "/dev/block/mmcblk0p2"));

I flashed in twrp. Said it flashed successful but baseband didn't change.
Sent from my SGH-M919 using Tapatalk

Try wiping dalvik & cache after flash & before reboot. Might work.

http://forum.xda-developers.com/showpost.php?p=47872068&postcount=111
He says it's not possible.
I will try with write_raw_image instead of extracting to a /tmp folder.
NEW FILES UPLOADED to test "write_raw_image"
(I'm still waiting for the odin image to finish dling. Hotfile is so slow for me...)

omnifarious said:
http://forum.xda-developers.com/showpost.php?p=47872068&postcount=111
He says it's not possible.
I will try with write_raw_image instead of extracting to a /tmp folder.
NEW FILES UPLOADED to test "write_raw_image"
(I'm still waiting for the odin image to finish dling. Hotfile is so slow for me...)
Click to expand...
Click to collapse
I'll be the pig...if you dont hear from ke in 20 minutes then it probably didnt work (just in case I have to revert back to stock when I get home)

How about Odin flashible?
Sent from my GT-I9505G using xda app-developers app

roblxskye said:
How about Odin flashible?
Sent from my GT-I9505G using xda app-developers app
Click to expand...
Click to collapse
j_r0dd said:
Here is the MK2 GSM & LTE modems. If you need help flashing with Odin go to this thread. I used heimdall and those commands are below.
Code:
heimdall flash --MDM modem.bin
heimdall flash --APNHLOS NON-HLOS.bin
LTE Modem
md5: 80f4411ef589ee1cfbbd776f4c169b6a
http://www.mediafire.com/download/i44ynin7dsymfx5/NON-HLOS.bin
GSM Modem
md5: c4b3d2dd0e24f48d208bc3987f163b5f
http://www.mediafire.com/download/1gsjokadys4l89x/modem.bin
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
those are the ones I used and worked perfect

No luck..status 7 error and aborted...installing thru odin now

jordin1128 said:
No luck..status 7 error and aborted...installing thru odin now
Click to expand...
Click to collapse
Thanks for your effort. I'll pull the files. The 2 bin files listed a few posts back were the ones I used. You can flash those thru odin/mobile odin.

i was able to get them to flash and update successfully by just pasting both .bin files into Odin.
i did NON-HLOS.bin first. leave auto reboot unticked. when it finishes, hold power so your device turns off. boot back into download mode. now flash modem.bin with auto reboot ticked. that worked for me.

omnifarious said:
Thanks for your effort. I'll pull the files. The 2 bin files listed a few posts back were the ones I used. You can flash those thru odin/mobile odin.
Click to expand...
Click to collapse
Ok there is a big problem with this modem baseband like stated above..... does not let u make phone calls on the leaked 4.3 tw version..... or the regular 4.2.2 version and like some1 said 4.4..... not sure if it works on the official 4.3 tw released today since no dev has released a rom of it... so do not flash if u need to make or receive phone calls makes ur phone freeze and wont make the actual call
Sent from my SGH-M919 using Tapatalk

gdmlaz said:
Ok there is a big problem with this modem baseband like stated above..... does not let u make phone calls on the leaked 4.3 tw version..... or the regular 4.2.2 version and like some1 said 4.4..... not sure if it works on the official 4.3 tw released today since no dev has released a rom of it... so do not flash if u need to make or receive phone calls makes ur phone freeze and wont make the actual call
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I've been having the same issue on the latest [TW-ROM-MultiDpi][23.11.2013] X-NOTE build 2.0 Freedom Ed. I9505 MK8 android 4.3. Everything was fine till I flash both files. Data doesn't drop, but voice doesn't work. My wifi was fine however.

omnifarious said:
I've been having the same issue on the latest [TW-ROM-MultiDpi][23.11.2013] X-NOTE build 2.0 Freedom Ed. I9505 MK8 android 4.3. Everything was fine till I flash both files. Data doesn't drop, but voice doesn't work. My wifi was fine however.
Click to expand...
Click to collapse
Yeap everything works perfect xcept u cant make or receive phone calls..... kind of a big deal lol
Sent from my SGH-M919 using Tapatalk

gdmlaz said:
Yeap everything works perfect xcept u cant make or receive phone calls..... kind of a big deal lol
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Imagine all the pissed off T-Mobile customers who don't know about flashing and can't dial 611. LOL :laugh:

mrvirginia said:
i was able to get them to flash and update successfully by just pasting both .bin files into Odin.
i did NON-HLOS.bin first. leave auto reboot unticked. when it finishes, hold power so your device turns off. boot back into download mode. now flash modem.bin with auto reboot ticked. that worked for me.
Click to expand...
Click to collapse
Thank you, mrvirginia. Worked great, and the fastest radio so far for me. 37Mb down. Never see that before.

omnifarious said:
Imagine all the pissed off T-Mobile customers who don't know about flashing and can't dial 611. LOL :laugh:
Click to expand...
Click to collapse
I wonder if is doing this in the OFFICIAL VERSION ?THE OTA version ??? or just us that have flashed the modem separately..... I'm going to try to find out with people that have flashed this THE OFFICIAL OTA.... Btw do you have the MDL modems to flash ????
---------- Post added at 04:18 PM ---------- Previous post was at 04:18 PM ----------
Pinan said:
Thank you, mrvirginia. Worked great, and the fastest radio so far for me. 37Mb down. Never see that before.
Click to expand...
Click to collapse
have you tried making phone calls tho ?

Seems like a bootloader check to me.. And about installing via CWM, youre prolly gonna have to use busybox and dd.