Hi all
I managed to screw up the ribbon cable to my digitizer on my 8" Archos g9. Does anyone have a used digitizer for sale?
Didn't see anything on e bay
Thanks
Bruce
is the cable white or yellow? I'm swapping out a cracked digitizer. if it's the white cable you need, we may be able to work something out.
Related
I've accidently cutted the PCB cable that connects the LCD to the motherboard.
How to replace it? Were to get it? anyone has a spare or used?
Please... I really need help, can't afford to buy the hole screen, need to fix this one.
Thanks guys!
flyboy_____ said:
I've accidently cutted the PCB cable that connects the LCD to the motherboard.
How to replace it? Were to get it? anyone has a spare or used?
Please... I really need help, can't afford to buy the hole screen, need to fix this one.
Thanks guys!
Click to expand...
Click to collapse
cables that fragil and are mainly a plastic with either a conductive paint or copper cladding is not a repairable thing other then replacement, a few have suggested searching ebay as you can get a replacement screen cheap this may also apply to getting the cable only if it's detachable. but believe me I've tried this and i'm great with surface mount on the PCB direct soldering on the ribbon is possible but the wire type adn tools needed out weigh the cost of the LCD used or new
Hi there!
While replacing the speakre of my BA the lcd cable broke. But I already changed the lcd some time ago and now i have one broken lcd with a good cable and one good lcd with a broken cable.
Does anyone know how i change the cable?
Sorry friend, I had made the the same mistake; there's no way to replace it.
You have to buy a new BA lcd screen.
Well....
Some of those ribbon cables are attached to the glass via what amounts to glue. Electrical contact is done just by touch (no soldering).
At this point, I'd take apart one of the LCD's to see. It's not like you are going to make things worse if you break the glass on the dodgy LCD, it's already dead, correct?
Just try to post the results so the rest of us know as well!
yeah please post your results...
better if you have pics for it.
... im interested in "frankensteining" our BA's
Got my brothers old mytouch 4g with a shattered screen. upon replacing the lcd and digitizer I somehow broke the connector for the lcd ribbon cable. not sure how I did that it just seemed to crumble. does anyone happen to have a used one sitting around that they can sell?
just in case you can't find a cheap motherboard. can i buy your mt4g accessories? i need a cheap original accessories.
Kaz_7454 said:
Got my brothers old mytouch 4g with a shattered screen. upon replacing the lcd and digitizer I somehow broke the connector for the lcd ribbon cable. not sure how I did that it just seemed to crumble. does anyone happen to have a used one sitting around that they can sell?
Click to expand...
Click to collapse
I have six of them, but they all have the bad emmc chip and have failed... So i dont think you would be too interested in those. so i highly doubt you will find what you are looking for as well, if it is in good shape, then why would they want to sell it, and there are few, if any other than me that have tried anything like hardware hacking these things...
is it possible to swap the emmc chip from one board to another?
Kaz_7454 said:
is it possible to swap the emmc chip from one board to another?
Click to expand...
Click to collapse
not that i am aware of, check ebay for a board though...
the board i have now has a good emmc chip in it and works great except for the lcd connection point. the top plastic broke off to the ribbon cable is loose and it causes the screen to flicker real bad. ive looked online and a new board is around $120 new. im trying to get a broken phone off of ebay but so far they have all had bad chips.
Epoxy might be the dirty fix you need...
Me too!
Kaz_7454 said:
Got my brothers old mytouch 4g with a shattered screen. upon replacing the lcd and digitizer I somehow broke the connector for the lcd ribbon cable. not sure how I did that it just seemed to crumble. does anyone happen to have a used one sitting around that they can sell?
Click to expand...
Click to collapse
I have the same problem. The LCD connector is all messed up after attempting to replace the screen. Did you find a solution?
Me too! Let us know if you figure out either how to fix it or where to get some good motherboards.
So I dropped my Evo and now i want to fix it and want to order the parts but i read something about a wide flex cable and narrow flex cable does that pertain to the LCD only or the glass itself?
i have the wide flex cable (2WCA)
So to make my question clearer To buy the screen (Glass) not the LCD does it matter which flex cable i have??
TIA
Well I'm done with this crap screen I guess the ribbon cable is pinched or cracked somewhere I cant see, I've taken the glass off and inspected the ribbon cables but I cant find it so I'm in need of a new one.
Its the intel sofia quad1 r16. If anyone knows the part # and a place to order from in Canada or the US rather than china that would be awesome :good:
Thank You
https://forum.xda-developers.com/album.php?albumid=13619&pictureid=54204