The Unified Kernel can be found here:
http://forum.xda-developers.com/showthread.php?t=2273437
reserved 1
reserved 2
reserved 3
Nice! You're the man!
Thank you!!! Will this work with the latest TMO OTA update or does it matter?
Closed Source Project said:
Thank you!!! Will this work with the latest TMO OTA update or does it matter?
Click to expand...
Click to collapse
it should work with either...
Does this have that root disabler removed?
Im on wicked and flashed kernal everything is running good but I keep getting a notification that says detection notification that a app isattempting unpermitted actions. Oh I also installed faux clock
cwalker0906 said:
Im on wicked and flashed kernal everything is running good but I keep getting a notification that says detection notification that a app isattempting unpermitted actions. Oh I also installed faux clock
Click to expand...
Click to collapse
that's the secure linux stuff... nothing I can do because I needed them to have SOUND working Without it the sound won't work
Root is working 100%
faux123 said:
that's the secure linux stuff... nothing I can do because I needed them to have SOUND working Without it the sound won't work
Root is working 100%
Click to expand...
Click to collapse
Ok...yes root is working....when I hit the notification it asked me to reboot. At first I said later and the notification came back so I hit reboot and it took me to recovery. I rebooted from there and the notification has yet to come back. Thanks for your work
faux123 said:
that's the secure linux stuff... nothing I can do because I needed them to have SOUND working Without it the sound won't work
Root is working 100%
Click to expand...
Click to collapse
Thank!! I already purchased both of your apps for this kernel but one question. When messing around with the sound settings, I do not notice much difference. Did I do something wrong?
Notification came back...oh well
whytechapel_x said:
Thank!! I already purchased both of your apps for this kernel but one question. When messing around with the sound settings, I do not notice much difference. Did I do something wrong?
Click to expand...
Click to collapse
make sure all MUSIC/SOUND are off before adjusting the registers.
stop music / sound for 2~3 seconds,
adjust the sliders
start music / sound again.
be careful, it's fracking loud if you turn it all the way up!
cwalker0906 said:
Notification came back...oh well
Click to expand...
Click to collapse
as I said, annoying but just ignore it.
faux123 said:
as I said, annoying but just ignore it.
Click to expand...
Click to collapse
I froze the seandroid apk with titanium and it stopped the noitification.....will that alter anything with kernel?
nope, it shouldn't
I haven't seen many quadrants yet on the S4, but I just ran one after flashing this kernel - here it is. Off the bat, seems impressive.
Howdy faux good to see you here! Thanks :thumbup:
Sent from my SGH-M919 using xda premium
faux123 said:
The Unified Kernel can be found here:
http://forum.xda-developers.com/showthread.php?t=2273437
Click to expand...
Click to collapse
faux... you have no idea how happy I am to see you on this device. thx for kicking out the good stuff for so long. :good:
Related
Hiya all,
Well, now that we have CWM and could mess around with the phone with ease, is it possible for someone with the knowledge to try and get someone kind of notification indicator working on this phone? It could either be a Mod or an app, either one will be great, but while we wait for great ROMs coming out, maybe someone can work on this? I know we don't have any indicator LED on the phone, so maybe we can work on using the softkey LEDs to indicate things like missed calls, incoming texts or IMs or emails, etc. It will be great if it's customizable but let's just start with getting it to work with the notifications.
Thanks in advance
What happened to that app you once posted about? any news from the developer?
If someone can compile a custom kernel, it would be fairly easy to integrate BLN
== What is the BLN mod? ==
The BLN mod turns the touchkey backlights into a notification led.
It enables any android application to use the touchkey backlights of your phone as a notification led.
Click to expand...
Click to collapse
[email protected] said:
What happened to that app you once posted about? any news from the developer?
Click to expand...
Click to collapse
No news from him. I will reach out to him again and see if he is more interested now that we have made much more progress, but I'm not holding my breath for him to follow up.
KernelPanic, I have no clue what to do with kernels so I'm gonna go n sit on the bench on this lol. Unless u or someone can instruct me on what needs to be done. And yeah, it'll be great if we can intergrate BLN into the Rom.
I'll see what I can do. Maybe I can compile a kernel with a few tweaks and BLN real soon.
Found this: http://forum.xda-developers.com/showthread.php?t=1424668
hansmrtn said:
I'll see what I can do. Maybe I can compile a kernel with a few tweaks and BLN real soon.
Click to expand...
Click to collapse
Thank you very much for any support you can provide. Really much appreciated.
For now, those who would like to get some kind of notification via the softkey, Xigzil came through with updating his app to support our phone. You can look for the download here: http://forum.xda-developers.com/showthread.php?p=22047422#post22047422
Of course it will always be better if we can have BLN compiled into a kernel, much better to have it running natively rather than via an app, but for now, this can help us all.
lilbluemirage said:
Found this: http://forum.xda-developers.com/showthread.php?t=1424668
Click to expand...
Click to collapse
LOL! Bluemirage, you stole my thunder Haha
aquariuz23 said:
LOL! Bluemirage, you stole my thunder Haha
Click to expand...
Click to collapse
Sorry! I read this post and when i jumped to the dev forums, I saw your post and had to share All credits go to you!
lilbluemirage said:
Sorry! I read this post and when i jumped to the dev forums, I saw your post and had to share All credits go to you!
Click to expand...
Click to collapse
LOL! Silly u, no credits go to me whatsoever, everyone can spread the good news
Is there any way, or app that I can use to alert me via soft keys when new text messages arrive?
Thanks in advance
dormankenneth said:
Is there any way, or app that I can use to alert me via soft keys when new text messages arrive?
Thanks in advance
Click to expand...
Click to collapse
Of course, assuming you are on gingerbread and have a kernel that supports BLN.
app is BLN control
I am on ICS running the IML74K_Ics_Perfection II rom. I tried to install the Synergy kernel but ended up with a boot loop. Any ideas on how to remedy this issue or point me in the correct way.
dormankenneth said:
I am on ICS running the IML74K_Ics_Perfection II rom. I tried to install the Synergy kernel but ended up with a boot loop. Any ideas on how to remedy this issue or point me in the correct way.
Click to expand...
Click to collapse
Bud, you can't run gingerbread kernels on ICS. Which also means you can't have softkey notification on ICS. Flash aN ICS kernel and you'll be fixed.
From what I recall synergy is a gb kernel. U cannot use a gb kernel with an ics rom. Until source code is released, u have to pick. Either no ics, and bln control works, or use ics and forgo bln until source comes out
Thanks!
You can try an app called Noled, it doesnt use softkeys though. It uses the screen to light up icons.
xcrazydx said:
You can try an app called Noled, it doesnt use softkeys though. It uses the screen to light up icons.
Click to expand...
Click to collapse
Damn it x, u beat me to another thanks again lol
icenight89 said:
Damn it x, u beat me to another thanks again lol
Click to expand...
Click to collapse
Haha, sometimes you beat me
xcrazydx said:
Haha, sometimes you beat me
Click to expand...
Click to collapse
We were literally typing at he same time, u just hit submit faster lol
dormankenneth said:
Is there any way, or app that I can use to alert me via soft keys when new text messages arrive?
Thanks in advance
Click to expand...
Click to collapse
I use BLN pro (ofcourse with a compatible kernel and a GB rom).
It's pretty neat and can be configured for your sofkeys to blink at a custom rate(I set mine at half a second off and on) so it looks like regular leds. Some iphone users think its pretty legit!
Only reason I have yet to switch to ICS is because of no BLN support, no OC and no DOCK audio
dormankenneth said:
Is there any way, or app that I can use to alert me via soft keys when new text messages arrive?
Thanks in advance
Click to expand...
Click to collapse
try Missed Call Reminder v1 app from market....
NoLed App works best for me when screen is off it would pop up a notification on yor screen like a screen saver and also will show a picture if u want Nicee app
I don't have root and not going to this time, but I am trying to find where I can turn off the Dolby notification that stays up while music is playing.
Anyone know?
*bump
slipudatung said:
I don't have root and not going to this time, but I am trying to find where I can turn off the Dolby notification that stays up while music is playing.
Anyone know?
Click to expand...
Click to collapse
It's a simple smali edit. Ask you rom dev to do it.
SteelH said:
It's a simple smali edit. Ask you rom dev to do it.
Click to expand...
Click to collapse
Now there is a name I haven't seen in a long time! Hope your well mate..
I will be adding said toggle to my tweaks soon... Lots to consider
LeeDroid said:
Now there is a name I haven't seen in a long time! Hope your well mate..
I will be adding said toggle to my tweaks soon... Lots to consider
Click to expand...
Click to collapse
It's been awhile for sure. Trying to get back into things.
Perhaps you want to make your ROM M8_WHL compatible (Sprint m9)?
SteelH said:
It's been awhile for sure. Trying to get back into things.
Perhaps you want to make your ROM M8_WHL compatible (Sprint m9)?
Click to expand...
Click to collapse
Already added sprint support mate ? will be doing the same for the M9 ?
Lollipop zip provided by: asif4self & MarshMallow zip provided by @bumpaneer. I am just posting these for everyone to use. Be sure to thank them both!
There have been issues reported of not getting calls at all, if that's the case be sure to have a nandroid, no one mentioned in this thread will be responsible for anything that happens to your device.
For the record this will remove stock sense dialer so make sure to make backups!
How to install:
1. Download zip Lollipop here - MM here
2. Place in SD or EXTSD if you downloaded on your computer.
3. Reboot to recovery.
4. NANDROID (seriously don't get mad at me or @asif4self or @bumpaneer if anything goes wrong and you don't have your own backup)
5. Wipe Dalvik Cache + Cache.
6. Install zip.
7. Reboot and enjoy!
If you have any questions just ask here. Also, don't forget to thank @asif4self & @bumpaneer.
Trying it now. if this works, I will profess my love in the manliest way possible.
Would u pls upload the screen shots ? Wanna see what it looks like. Thanks
Great bro thanks for this
VAbaker said:
Would u pls upload the screen shots ? Wanna see what it looks like. Thanks
Click to expand...
Click to collapse
Updated OP with screenshots.
entropism said:
Trying it now. if this works, I will profess my love in the manliest way possible.
Click to expand...
Click to collapse
Hope it worked... I'd like to see how to profess love in a manly way.
Awesome !!! Thanks for sharing cuz i really hate stock dialpad look. LOL
sharky481232 said:
Hope it worked... I'd like to see how to profess love in a manly way.
Click to expand...
Click to collapse
It works! Didn't have sound for a bit, but it's up and working now.
As for professing love in a manly way, it's a lot of fumbling my words and kicking the dirt and I stare at my feet. Oh, and I possibly offend you unintentionally.
entropism said:
It works! Didn't have sound for a bit, but it's up and working now.
As for professing love in a manly way, it's a lot of fumbling my words and kicking the dirt and I stare at my feet. Oh, and I possibly offend you unintentionally.
Click to expand...
Click to collapse
LOL! I'm just happy with that thanks in the OP. :laugh: :good:
Thank you for this i like the GPE dialer instead of the sense one
I still use ExDialer, but would love to switch to GPE if I could get the same look out of it... black with dial-pad taking up less than half the space and at least 3.5 contacts from Call History showing at the top (plus swipe contact row right to call or left to txt).
Is any of that possible with any mods?
Thanks for this!
It's working for me with one small problem. The keypad doesn't seem to work in-call. Is this a known problem with a workaround?
Mr.Preacher said:
Thanks for this!
It's working for me with one small problem. The keypad doesn't seem to work in-call. Is this a known problem with a workaround?
Click to expand...
Click to collapse
My keypad works just fine during calls? What's your setup? Maybe try wiping app data via settings>apps>all and choose phone then clear data.
No dice. I had messed with trying to install GPE Dialer before finding this mod, so tomorrow I'll RUU and try it fresh to see how it goes.
sharky481232 said:
My keypad works just fine during calls? What's your setup? Maybe try wiping app data via settings>apps>all and choose phone then clear data.
Click to expand...
Click to collapse
Mr.Preacher said:
No dice. I had messed with trying to install GPE Dialer before finding this mod, so tomorrow I'll RUU and try it fresh to see how it goes.
Click to expand...
Click to collapse
Working fine with stock rom and Viper for me. Was buggy for the first few calls though, but seemed to settle in.
entropism said:
Working fine with stock rom and Viper for me. Was buggy for the first few calls though, but seemed to settle in.
Click to expand...
Click to collapse
Are you rooted? I'm running non-rooted stock Dev Edition ROM. Flashed the zip but new dialer does not show up. Still have Sense dialer and cannot find the GPE Phone icon in app drawer. I can see in the app in all Apps but no way to open the app.
anandlal said:
Are you rooted? I'm running non-rooted stock Dev Edition ROM. Flashed the zip but new dialer does not show up. Still have Sense dialer and cannot find the GPE Phone icon in app drawer. I can see in the app in all Apps but no way to open the app.
Click to expand...
Click to collapse
I am rooted yes ... If sense still shows up means it didn't flash right... Or maybe disable sense phone app in settings>apps and reboot see if it shows up.
I'm having the same problem on Viper.
entropism said:
Working fine with stock rom and Viper for me. Was buggy for the first few calls though, but seemed to settle in.
Click to expand...
Click to collapse
Mr.Preacher said:
I'm having the same problem on Viper.
Click to expand...
Click to collapse
Keep in mind, it was buggy for me for about 5 minutes. Been working fine since.
I'll install one more time and give it a few hours. Is there any chance this is a problem for me because I'm on Verizon? Are dialer/phone mods like this carrier/radio agnostic?
entropism said:
Keep in mind, it was buggy for me for about 5 minutes. Been working fine since.
Click to expand...
Click to collapse
Hi guys, as requested by a @suzook that tested it, i succesfully built a kernel for the huawei watch with autoroot and busybox.
If you are interested i can publish it but i have to upload the source to github first.
Let me know.
Skin1980 said:
Hi guys, as requested by a @suzook that tested it, i succesfully built a kernel for the huawei watch with autoroot and busybox.
If you are interested i can publish it but i have to upload the source to github first.
Let me know.
Click to expand...
Click to collapse
:good:
Where is EVERYBODY??????
I would just post it in development section. You have your creds.
Just for my information what are the benefits into rooting a wearable device?
Sent from my Samsung Galaxy Note 5 (SM-N920C) using stock ?v5.1.1 Samsung firmware
Cr4z33 said:
Just for my information what are the benefits into rooting a wearable device?
Sent from my Samsung Galaxy Note 5 (SM-N920C) using stock ?v5.1.1 Samsung firmware
Click to expand...
Click to collapse
Because you can! Lol.
suzook said:
Because you can! Lol.
Click to expand...
Click to collapse
Lol I see.
Sent from my Samsung Galaxy Note 5 (SM-N920C) using stock ?v5.1.1 Samsung firmware
So...any chance for kcal? Would love a little bit higher color temperature.
brizey said:
So...any chance for kcal? Would love a little bit higher color temperature.
Click to expand...
Click to collapse
Don't think by me. I don't own the device, sorry.
So I think I found a reason to have root access. The app Advanced Settings can supposedly adjust the vibration with root access.
brizey said:
So I think I found a reason to have root access. The app Advanced Settings can supposedly adjust the vibration with root access.
Click to expand...
Click to collapse
It can, and does
suzook said:
It can, and does
Click to expand...
Click to collapse
Per the app, it is set at 80% stock. Does it feel at lot stronger at 100%?
Definitely want this!
i must have,..pleaseeeeeee
Please post the Kernel,..and a HOW-TO
thank you so much,
regards
Very interesting indeed.
Any change to the display driver settings to see if the red tint issue it's software addressable?
@Skin1980 I installed your kernel and the app Advanced Settings to change the vibration intensity. But no matter what I choose, I don't feel any difference. Can you or someone else confirm, that this is working with your kernel? Is there another way to change vibration intensity?
phoenix321 said:
@Skin1980 I installed your kernel and the app Advanced Settings to change the vibration intensity. But no matter what I choose, I don't feel any difference. Can you or someone else confirm, that this is working with your kernel? Is there another way to change vibration intensity?
Click to expand...
Click to collapse
No one has figured out how to do it. Some of the other watches have a text file that controls the amp power for the vibration motor. This file is not there for the Huawei.
phoenix321 said:
@Skin1980 I installed your kernel and the app Advanced Settings to change the vibration intensity. But no matter what I choose, I don't feel any difference. Can you or someone else confirm, that this is working with your kernel? Is there another way to change vibration intensity?
Click to expand...
Click to collapse
Will take a look when I will have some free time.
phoenix321 said:
@Skin1980 I installed your kernel and the app Advanced Settings to change the vibration intensity. But no matter what I choose, I don't feel any difference. Can you or someone else confirm, that this is working with your kernel? Is there another way to change vibration intensity?
Click to expand...
Click to collapse
Ok, i think i found the driver and started to add a user interface to control the voltage of the vibrator. Like always i need a tester or a watch